Time-Resolved IR Spectroscopy Reveals a Mechanism with TiO2 as a Reversible Electron Acceptor in a TiO2-Re Catalyst System for CO2 Photoreduction

Photocatalytic CO2 Reduction Using Homogeneous Carbon Dots with a Molecular Cobalt Catalyst

A simple and precious-metal free photosystem for the reduction of aqueous CO2 to syngas (CO and H2) is reported consisting of carbon dots (CDs) as the sole light harvester together with a molecular cobalt bis(terpyridine) CO2 reduction co-catalyst. This homogeneous photocatalytic system operates in the presence of a sacrificial electron donor (triethanolamine) in DMSO/H2O solution at ambient temperature. The photocatalytic system exhibits an activity of 7.7 ± 0.2 mmolsyngas gCDs -1 (3.6 ± 0.2 mmolCO gCDs -1 and 4.1 ± 0.1 mmolH2 gCDs -1) after 24 hours of full solar spectrum irradiation (AM 1.5G). Spectroscopic and electrochemical characterization supports that this photocatalytic performance is attributed to a favorable association between CDs and the molecular cobalt catalyst, which results in improved interfacial photoelectron transfer and catalytic mechanism. This work provides a scalable and inexpensive platform for the development of CO2 photoreduction systems using CDs.

A Review of the Effect of Defect Modulation on the Photocatalytic Reduction Performance of Carbon Dioxide

Constructive defect engineering has emerged as a prominent method for enhancing the performance of photocatalysts. The mechanisms of the influence of defect types, concentrations, and distributions on the efficiency, selectivity, and stability of CO2 reduction were revealed for this paper by analyzing the effects of different types of defects (e.g., metallic defects, non-metallic defects, and composite defects) on the performance of photocatalysts. There are three fundamental steps in defect engineering techniques to promote photocatalysis, namely, light absorption, charge transfer and separation, and surface-catalyzed reactions. Defect engineering has demonstrated significant potential in recent studies, particularly in enhancing the light-harvesting, charge separation, and adsorption properties of semiconductor photocatalysts for reducing processes like carbon dioxide reduction. Furthermore, this paper discusses the optimization method used in defect modulation strategy to offer theoretical guidance and an experimental foundation for designing and preparing efficient and stable photocatalysts.

Antenna Effect in Noble Metal-Free Dye-Sensitized Photocatalytic Systems Enhances CO2 -to-CO Conversion

Dye-sensitized photocatalytic systems (DSPs) have been extensively investigated for solar-driven hydrogen (H2 ) evolution. However, their application in carbon dioxide (CO2 ) reduction remains limited. Furthermore, current solar-driven CO2 -to-CO DSPs typically employ rhenium complexes as catalysts. In this study, we have developed DSPs that incorporate noble metal-free components, specifically a zinc-porphyrin as photosensitizer (PS) and a cobalt-quaterpyridine as catalyst (CAT). Taking a significant stride forward, we have achieved an antenna effect for the first time in CO2 -to-CO DSPs by introducing a Bodipy as an additional chromophore to enhance light harvesting efficiency. The energy transfer from Bodipy to zinc porphyrin resulted in remarkable stability (turn over number (TON)=759 vs. CAT), and high CO evolution activity (42 mmol g-1  h-1 vs. CAT).

Nanostructured Black Silicon as a Stable and Surface-Sensitive Platform for Time-Resolved In Situ Electrochemical Infrared Absorption Spectroscopy

Attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) is a powerful method for probing interfacial chemical processes. However, SEIRAS-active nanostructured metallic thin films for the in situ analysis of electrochemical phenomena are often unstable under biased aqueous conditions. In this work, we present a surface-enhancing structure based on etched black Si internal reflection elements with Au-coatings for in situ electrochemical ATR-SEIRAS. Using electrochemical potential-dependent adsorption and desorption of 4-methoxypyridine on Au, we demonstrate that black Si-based substrates offer advantages over commonly used structures, such as electroless-deposited Au on Si and electrodeposited Au on ITO-coated Si, due to the combination of high stability, sensitivity, and conductivity. These characteristics are especially valuable for time-resolved measurements where stable substrates are required over extended times. Furthermore, the low sheet resistance of Au layers on black Si reduces the RC time constant of the electrochemical cell, enabling a significantly higher time resolution compared to that of traditional substrates. Thus, we employ black Si-based substrates in conjunction with rapid- and step-scan Fourier transform infrared (FTIR) spectroscopy to investigate the adsorption and desorption kinetics of 4-methoxypyridine during in situ electrochemical potential steps. Adsorption is shown to be diffusion-limited, which allows for the determination of the mean molecular area in a fully established monolayer. Moreover, no significant changes in the peak ratios of vibrational modes with different orientations relative to the molecular axis are observed, suggesting a single adsorption mode and no alteration of the average molecular orientation during the adsorption process. Overall, this study highlights the enhanced performance of black Si-based substrates for both steady-state and time-resolved in situ electrochemical ATR-SEIRAS, providing a powerful platform for kinetic and mechanistic investigations of electrochemical interfaces.

Solar CO2 reduction using a molecular Re(I) catalyst grafted on SiO2via amide and alkyl amine linkages

Heterogenized molecular catalysts have shown interesting activities in different chemical transformations. In our previous studies, a molecular catalyst, Re(bpy)(CO)3Cl where bpy is 2,2'-bipyridine, was covalently attached to silica surfaces via an amide linkage for use in photocatalytic CO2 reduction. Derivatizing the bpy ligand with electron-withdrawing amide groups led to detrimental effects on the catalytic activity of Re(bpy)(CO)3Cl. In this study, an alkyl amine linkage is utilized to attach Re(bpy)(CO)3Cl onto SiO2 in order to eliminate the detrimental effects of the amide linkage by breaking the conjugation between the bpy ligand and the amide group. However, the heterogenized Re(I) catalyst containing the alkyl amine linkage demonstrates even lower activity than the one containing the amide linkage in photocatalytic CO2 reduction. Infrared studies suggest that the presence of the basic amine group led to the formation of a photocatalytically inactive Re(I)-OH species on SiO2. Furthermore, the amine group likely contributes to the stabilization of a surface Re(I)-carboxylato species formed upon light irradiation, resulting in the low activity of the heterogenized Re(I) catalyst containing the alkyl amine linkage.

Real-Time Tracking of Hot Carrier Injection at the Interface of FAPbBr3 Perovskite Using Femtosecond Mid-IR Spectroscopy

One of the most effective approaches to optimizing the performance of perovskite solar cells is to fully understand the ultrafast carrier dynamics at the interfaces between absorber and transporting layers at both the molecular and atomic levels. Here, the injection dynamics of hot and relaxed charge carriers at the interface between the hybrid perovskite, formamidinium lead bromide (FAPbBr3), and the organic electron acceptor, IEICO-4F, are investigated and deciphered by using femtosecond (fs) mid-infrared (IR), transient absorption (TA), and fluorescence spectroscopies. The visible femtosecond-TA measurements reveal the generation of hot carriers and their transition to free carriers in the pure FAPbBr3 film. Meanwhile, the efficient extraction of hot carriers in the mixed FAPbBr3/IEICO-4F film is clearly evidenced by the complete disappearance of their spectral signature. More specifically, the time-resolved results reveal that hot carriers are injected from FAPbBr3 to IEICO-4F within 150 fs, while the transfer time for the relaxed carriers is about 205 fs. The time-resolved mid-IR experiments also demonstrate the ultrafast formation of two peaks at 2115 and 2233 cm-1, which can be attributed to the C≡N symmetrical and asymmetrical vibrational modes of anionic IEICO-4F, thus providing crystal clear evidence for the electron transfer process between the donor and acceptor units. Moreover, photoluminescence (PL) lifetime measurements reveal an approximately 10-fold decrease in the donor lifetime in the presence of IEICO-4F, thereby confirming the efficient electron injection from the perovskite to the acceptor unit. In addition, the efficient electron injection at the FAPbBr3/IEICO-4F interface and its impact on the C≡N bond character are experimentally evidenced and align with density functional theory (DFT) calculations. This work offers new insights into the electron injection process at the FAPbBr3/IEICO-4F interface, which is crucial for developing efficient optoelectronic devices.

Visible light-driven CO2 photoreduction by a Re(I) complex immobilized onto CuO/Nb2O5 heterojunctions

The immobilization of Re(I) complexes onto metal oxide surfaces presents an elegant strategy to enhance their stability and reusability toward photocatalytic CO2 reduction. In this study, the photocatalytic performance of fac-[ClRe(CO)3(dcbH2)], where dcbH2 = 4,4'-dicarboxylic acid-2,2'-bipyridine, anchored onto the surface of 1%m/m CuO/Nb2O5 was investigated. Following adsorption, the turnover number for CO production (TONCO) in DMF/TEOA increased significantly, from ten in solution to 370 under visible light irradiation, surpassing the TONCO observed for the complex onto pristine Nb2O5 or CuO surfaces. The CuO/Nb2O5 heterostructure allows for efficient electron injection by the Re(I) center, promoting efficient charge separation. At same time CuO clusters introduce a new absorption band above 550 nm that contributes for the photoreduction of the reaction intermediates, leading to a more efficient CO evolution and minimization of side reactions.

Significance of the connecting position between Zn(ii) porphyrin and Re(i) bipyridine tricarbonyl complex units in dyads for room-temperature phosphorescence and photocatalytic CO2 reduction: unexpected enhancement by triethanolamine in catalytic activity

We synthesized three new dyads composed of a Zn porphyrin and fac-Re(bpy)(CO)3Br (bpy = 2,2'-bipyridine) units, ZnP-nBpy[double bond, length as m-dash]ReBr (n = 4, 5, and 6), in which the porphyrin is directly connected at the meso-position through the 4-, 5-, or 6-position of the bpy. We investigated the relationships between the connecting positions and the photophysical properties as well as catalytic activity in the CO2 reduction reaction. The dyad connected through the 6-position, ZnP-6Bpy[double bond, length as m-dash]ReBr, showed obvious phosphorescence with a lifetime of 280 μs at room temperature, in N,N-dimethylacetamide (DMA), whereas the other two dyads showed almost no phosphorescence under the same conditions. The photocatalytic CO2 reduction reactions in DMA using 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole as the electron donor and the three dyads ZnP-nBpy[double bond, length as m-dash]ReBr selectively produced CO with similar initial rates, but the durabilities were low. The addition of triethanolamine (TEOA) suppressed the decomposition of dyads, improving their durabilities and reaction efficiencies. In particular, ZnP-5Bpy[double bond, length as m-dash]ReBr was remarkably improved-it gave the highest durability and reaction efficiency among the three dyads; the reaction quantum yield reached 24%. The reason for this significant activity is no accumulation of electrons on the Zn porphyrin in ZnP-5Bpy[double bond, length as m-dash]ReBr, which would be caused by dual interactions of TEOA with the Re and Zn ions in the dyad. As the highest catalytic activity was observed in ZnP-5Bpy[double bond, length as m-dash]ReBr among the three dyads, which had no room-temperature phosphorescence (RTP), the catalytic activities and RTP properties are considered independent, but they are greatly influenced by the connecting positions on the bpy ligand in ZnP-nBpy[double bond, length as m-dash]ReBr.

Versatile Femtosecond Laser Synchronization for Multiple-Timescale Transient Infrared Spectroscopy

Several ways to electronically synchronize different types of amplified femtosecond laser systems are presented based on a single freely programmable electronics hardware: arbitrary-detuning asynchronous optical sampling (ADASOPS), as well as actively locking two femtosecond laser oscillators, albeit not necessarily to the same round-trip frequency. They allow us to rapidly probe a very wide range of timescales, from picoseconds to potentially seconds, in a single transient absorption experiment without the need to move any delay stage. Experiments become possible that address a largely unexplored aspect of many photochemical reactions, in particular in the context of photo-catalysis as well as photoactive proteins, where an initial femtosecond trigger very often initiates a long-lasting cascade of follow-up processes. The approach is very versatile and allows us to synchronize very different lasers, such as a Ti:Sa amplifier and a 100 kHz Yb-laser system. The jitter of the synchronization, and therewith the time-resolution in the transient experiment, lies in the range from 1 to 3 ps, depending on the method. For illustration, transient IR measurements of the excited state solvation and decay of a metal carbonyl complex as well as the full reaction cycle of bacteriorhodopsin are shown. The pros and cons of the various methods are discussed, with regard to the scientific question one might want to address, and also with regard to the laser systems that might be already existent in a laser lab.

The Facile Synthesis of a Re-Complex Heterogeneous Catalysis System for Enhancing CO2 Photoreduction Activity

fac-Re(2,2'-bipyridine)(CO)₃Cl] (denoted as ReCC) is an efficient molecule-catalyst with high selectivity in the photoreduction of CO₂ to CO in a homogeneous system. However, the two major drawbacks of Re(I) complexes in the homogeneous system, easy degradation and difficult separation, seriously hinder its development in the field of industrial applications. In this paper, we designed and prepared two different Re-complex fixation systems (denoted as ReCC@TiO₂-5 wt% and ReCC-TiO₂-5 wt%) based on TiO₂ gel via the sensitization method and sol-gel method, respectively. Compared with a pure ReCC complex, both of them exhibited excellent photocatalytic reduction activity. In particular, the sol-gel hybrid system (ReCC-TiO₂-5 wt%) displayed outstanding positive synergistic effects on the photocatalytic activity and the long durability of the photocatalytic process. A series of characterizations were carried out to explore the probable photocatalytic reduction process mechanism, which provides the theoretical basis and technical support for the Re complex fixation method.

Dynamics of Photoinduced Intramolecular and Intermolecular Electron Transfers in Ligand-Conjugated Ir(III)-Re(I) Photocatalysts

We report the electron transfer (ET) dynamics in a series of Ir(III)-Re(I) photocatalysts where two bipyridyl ligands of Ir and Re moieties are conjugated at the meta (m)- or para (p)-position of each side. Femtosecond transient absorption (TA) measurements identify the intramolecular ET (IET) dynamics from the Ir to Re moiety, followed by the formation of one-electron-reduced species (OERS) via the intermolecular ET with a sacrificial electron donor (SED). The IET rate depends on the bridging ligand (BL) structures (∼25 ps for BL_mm/mp vs ∼68 ps for BL_pm/pp), while the OERS formation happens on an even slower time scale (∼1.4 ns). Connecting the Re moiety at the meta-position of the bipyridyl of the Ir moiety can restrict the rotation around a covalent bond between two bipyridyl ligands by steric hindrances and facilitate the IET process. This highlights the importance of BL structures on the ET dynamics in photocatalysts.

Dissecting conjugation and electronic effects on the linear and non-linear optical properties of rhenium(I) carbonyl complexes

Herein, we report a theoretical and experimental analysis of the conjugation and electronic effects on the one-photon (1PA) and two-photon absorption (2PA) properties of a series of Re(I) carbonyl complexes with terpyridine-based ligands. An excellent agreement was obtained between the calculated and experimental 2PA spectra of the κ2N-terpyridine tricarbonyl complexes (1a-b), with 2PA cross sections reaching up to ca. 40 GM in DMF. By stepwise lowering the conjugation length in the terpy ligand and changing the local symmetry around the metal centre, we show that conjugation and delocalisation play a major role in increasing 2PA cross sections, and that the character of the excited states does not directly enhance the non-linear properties of these complexes-contrary to the results observed in 1PA. Altogether, these results give valuable guidelines towards more efficient two-photon-absorbing coordination complexes of Re(I), with potential applications in photodynamic therapy and two-photon imaging.

Gold nanoparticle-based supramolecular approach for dye-sensitized H2-evolving photocathodes

Solar conversion of water into the storable energy carrier H₂ can be achieved through photoelectrochemical water splitting using light adsorbing anodes and cathodes bearing O₂ and H₂ evolving catalysts, respectively. Herein a novel photocathode nanohybrid system is reported. This photocathode consists of a dye-sensitized p-type nickel oxide (NiO) with a perylene-based chromophore (PCA) and a tetra-adamantane modified cobaloxime reduction catalyst (Co) that photo-reduces aqueous protons to H₂. An original supramolecular approach was employed, using β-cyclodextrin functionalized gold nanoparticles (β-CD-AuNPs) to link the alkane chain of the PCA dye to the adamantane moieties of the cobaloxime catalyst (Co). This new architecture was investigated by photoelectrochemical measurements and via femtosecond-transient absorption spectroscopy. The results show that irradiation of the complete NiO|PCA|β-CD-AuNPs|Co electrode leads to ultrafast hole injection into NiO (π = 3 ps) from the excited dye, followed by rapid reduction of the catalyst, and finally H₂ evolution.

Phosphorus Tailors the d-Band Center of Copper Atomic Sites for Efficient CO2 Photoreduction under Visible-Light Irradiation

Photoreduction of CO₂ into solar fuels has received great interest, but suffers from low catalytic efficiency and poor selectivity. Herein, two single-Cu-atom catalysts with unique Cu configurations in phosphorus-doped carbon nitride (PCN), namely, Cu₁ N₃ @PCN and Cu₁ P₃ @PCN were fabricated via selective phosphidation, and tested in visible light-driven CO₂ reduction by H₂ O without sacrificial agents. Cu₁ N₃ @PCN was exclusively active for CO production with a rate of 49.8 μmol_CO  g_cat ^-1  h^-1 , outperforming most polymeric carbon nitride (C₃ N₄ ) based catalysts, while Cu₁ P₃ @PCN preferably yielded H₂ . Experimental and theoretical analysis suggested that doping P in C₃ N₄ by replacing a corner C atom upshifted the d-band center of Cu in Cu₁ N₃ @PCN close to the Fermi level, which boosted the adsorption and activation of CO₂ on Cu₁ N₃ , making Cu₁ N₃ @PCN efficiently convert CO₂ to CO. In contrast, Cu₁ P₃ @PCN with a much lower Cu 3d electron energy exhibited negligible CO₂ adsorption, thereby preferring H₂ formation via photocatalytic H₂ O splitting.

Surface-modified, dye-sensitized niobate nanosheets enabling an efficient solar-driven Z-scheme for overall water splitting

While dye-sensitized metal oxides are good candidates as H₂ evolution photocatalysts for solar-driven Z-scheme water splitting, their solar-to-hydrogen (STH) energy conversion efficiencies remain low because of uncontrolled charge recombination reactions. Here, we show that modification of Ru dye-sensitized, Pt-intercalated HCa₂Nb₃O₁₀ nanosheets (Ru/Pt/HCa₂Nb₃O₁₀) with both amorphous Al₂O₃ and poly(styrenesulfonate) (PSS) improves the STH efficiency of Z-scheme overall water splitting by a factor of ~100, when the nanosheets are used in combination with a WO₃-based O₂ evolution photocatalyst and an I₃^-/I^- redox mediator, relative to an analogous system that uses unmodified Ru/Pt/HCa₂Nb₃O₁₀. By using the optimized photocatalyst, PSS/Ru/Al₂O₃/Pt/HCa₂Nb₃O₁₀, a maximum STH of 0.12% and an apparent quantum yield of 4.1% at 420 nm were obtained, by far the highest among dye-sensitized water splitting systems and comparable to conventional semiconductor-based suspended particulate photocatalyst systems.

Charge carrier dynamics and reaction intermediates in heterogeneous photocatalysis by time-resolved spectroscopies

Sunlight as the most abundant renewable energy holds the promise to make our society sustainable. However, due to its low power density and intermittence, efficient conversion and storage of solar energy as a clean fuel are crucial. Apart from solar fuel synthesis, sunlight can also be used to drive other reactions including organic conversion and air/water purification. Given such potential of photocatalysis, the past few decades have seen a surge in the discovery of photocatalysts. However, the current photocatalytic efficiency is still very moderate. To address this challenge, it is important to understand fundamental factors that dominate the efficiency of a photocatalytic process to enable the rational design and development of photocatalytic systems. Many recent studies highlighted transient absorption spectroscopy (TAS) and time-resolved infrared (TRIR) spectroscopy as powerful approaches to characterise charge carrier dynamics and reaction pathways to elucidate the reasons behind low photocatalytic efficiencies, and to rationalise photocatalytic activities exhibited by closely related materials. Accordingly, as a fast-moving area, the past decade has witnessed an explosion in reports on charge carrier dynamics and reaction mechanisms on a wide range of photocatalytic materials. This critical review will discuss the application of TAS and TRIR in a wide range of heterogeneous photocatalytic systems, demonstrating the variety of ways in which these techniques can be used to understand the correlation between materials design, charge carrier behaviour, and photocatalytic activity. Finally, it provides a comprehensive outlook for potential developments in the area of time-resolved spectroscopies with an aim to provide design strategies for photocatalysts.

Ultrafast transient infrared spectroscopy for probing trapping states in hybrid perovskite films

Studying the charge dynamics of perovskite materials is a crucial step to understand the outstanding performance of these materials in various fields. Herein, we utilize transient absorption in the mid-infrared region, where solely electron signatures in the conduction bands are monitored without external contributions from other dynamical species. Within the measured range of 4000 nm to 6000 nm (2500-1666 cm-1), the recombination and the trapping processes of the excited carriers could be easily monitored. Moreover, we reveal that within this spectral region the trapping process could be distinguished from recombination process, in which the iodide-based films show more tendencies to trap the excited electrons in comparison to the bromide-based derivatives. The trapping process was assigned due to the emission released in the mid-infrared region, while the traditional band-gap recombination process did not show such process. Various parameters have been tested such as film composition, excitation dependence and the probing wavelength. This study opens new frontiers for the transient mid-infrared absorption to assign the trapping process in perovskite films both qualitatively and quantitatively, along with the potential applications of perovskite films in the mid-IR region.

Utilization of Low-Concentration CO2 with Molecular Catalysts Assisted by CO2-Capturing Ability of Catalysts, Additives, or Reaction Media

Increasing concentration of atmospheric CO₂ is a worldwide concern and continues to trigger various environmental problems. Photo- or electrocatalytic CO₂ reduction (CO₂-Red) using solar energy, i.e., artificial photosynthesis, is a prospective technique owing to its sustainability and the usefulness of the reaction products. Concentrations of CO₂ in exhaust gases from industries are several % to 20%, and that in the atmosphere is about 400 ppm. Although condensation processes of CO₂ require high energy consumption and cost, pure CO₂ has been used in most of the reported studies for photo- and electrocatalytic CO₂-Red because the reaction between CO₂ and the catalyst could be one of the rate-limiting steps. To address these issues and provide a repository of potential techniques for other researchers, this perspective summarizes the catalytic systems reported for the reduction of low-concentration CO₂, which utilize a combination of catalytic CO₂-Red and CO₂-capturing reactions (or CO₂ adsorption). First, we describe CO₂ insertions into M-X bonds of the catalysts, which increase the rate constants and/or equilibrium constants for CO₂ binding on the catalysts, and modifications of the second coordination sphere to stabilize the CO₂-bound catalysts. Furthermore, we discuss the reaction media used for catalytic CO₂-Red that have the unique effect of increasing CO₂ concentrations around the catalysts. These reaction media include typical CO₂-capturing additives, ionic liquids, and metal-organic frameworks.

Solar-Driven Producing of Value-Added Chemicals with Organic Semiconductor-Bacteria Biohybrid System

Photosynthetic biohybrid systems exhibit promising performance in biosynthesis; however, these systems can only produce a single metabolite and cannot further transform carbon sources into highly valuable chemical production. Herein, a photosynthetic biohybrid system integrating biological and chemical cascade synthesis was developed for solar-driven conversion of glucose to value-added chemicals. A new ternary cooperative biohybrid system, namely bacterial factory, was constructed by self-assembling of enzyme-modified light-harvesting donor-acceptor conjugated polymer nanoparticles (D-A CPNs) and genetically engineered Escherichia coli (E. coli). The D-A CPNs coating on E. coli could effectively generate electrons under light irradiation, which were transferred into E. coli to promote the 37% increment of threonine production by increasing the ratio of nicotinamide adenine dinucleotide phosphate (NADPH). Subsequently, the metabolized threonine was catalyzed by threonine deaminase covalently linking with D-A CPNs to obtain 2-oxobutyrate, which is an important precursor of drugs and chemicals. The 2-oxobutyrate yield under light irradiation is increased by 58% in comparison to that in dark. This work provides a new organic semiconductor-microorganism photosynthetic biohybrid system for biological and chemical cascade synthesis of highly valuable chemicals by taking advantage of renewable carbon sources and solar energy.

Ultrafast charge transfer dynamics in 2D covalent organic frameworks/Re-complex hybrid photocatalyst

Rhenium(I)-carbonyl-diimine complexes have emerged as promising photocatalysts for carbon dioxide reduction with covalent organic frameworks recognized as perfect sensitizers and scaffold support. Such Re complexes/covalent organic frameworks hybrid catalysts have demonstrated high carbon dioxide reduction activities but with strong excitation energy-dependence. In this paper, we rationalize this behavior by the excitation energy-dependent pathways of internal photo-induced charge transfer studied via transient optical spectroscopies and time-dependent density-functional theory calculation. Under band-edge excitation, the excited electrons are quickly injected from covalent organic frameworks moiety into catalytic Rhenium^I center within picosecond but followed by fast backward geminate recombination. While under excitation with high-energy photon, the injected electrons are located at high-energy levels in Rhenium^I centers with longer lifetime. Besides those injected electrons to Rhenium^I center, there still remain some long-lived electrons in covalent organic frameworks moiety which is transferred back from Rhenium^I. This facilitates the two-electron reaction of carbon dioxide conversion to carbon monoxide.

Re complexes within covalent organic frameworks have emerged as promising photocatalysts for CO₂ reduction. Here, authors identify a high-energy electron transfer pathway during CO₂ reduction that results in longer-lived excited states than a low-energy electron transfer pathway.

A distinctive semiconductor-metalloid heterojunction: unique electronic structure and enhanced CO2 photoreduction activity

Increasing the concentration and separation ability of charge carriers in photocatalysts has still been a crucial issue and challenge to achieve high CO₂ photoreduction performance. Here, we construct a distinctive heterojunction between semiconductor (CeO₂) and metalloid (CuS). It has been discovered that, different from conventional semiconductor and Schottky heterojunctions, in this system, electrons (e_sc^-) located at the conduction band (CB) of CeO₂ will transfer to the Fermi level in partially occupied band (CB) of CuS and accumulate there. Then, together with transition electrons (e_tr^-) excited from the CB below Fermi level or fully filled band (B_-1) of CuS, these e_sc^- will further transfer to the lowest unoccupied band (B₁) of CuS, finally participate in CO₂ reduction reaction. Because the concentration and separation efficiency of charge carriers has been obviously increased, this heterojunction exhibits remarkably enhanced CO₂ photoreduction performance. In-situ FTIR was conducted to explore the reaction process and the changes of intermediates on the surface of this catalyst during CO₂ photoreduction. Given that this type of heterojunction can only be established between a semiconductor and a metalloid and exhibits special electron transfer behavior, this work really provides an unconventional strategy for the design of photocatalysts with superior CO₂ photoreduction activity.

Improved photocatalytic activity and stability of InGaN quantum dots/C3N4heterojunction photoelectrode for CO2reduction and hydrogen production

Photocatalytic conversion of CO₂to produce fuel is considered a promising approach to reduce CO₂emissions and tackle energy crisis. GaN-based materials have been studied for CO₂reduction because of their excellent optical properties and band structure. However, low photocatalytic activity and severe photocorrosion of GaN-based photoelectrode greatly limit their applications. In this work, photocatalytic activity was improved by adopting InGaN quantum dots (QDs) combined with C₃N₄nano-sheets as photoanode, and thus the efficiency of CO₂reduction and the selectivity of hydrogen production were increased significantly. In addition, the photoelectron-chemical corrosion of photoelectrodes has been apparently controlled. InGaN QDs/C₃N₄has the highest CO and H₂productions rates of 14.69μmol mol^-1h^-1and 140μmol mol^-1h^-1which were 2.2 times and 14.5 times than that of InGaN film photoelectrode, respectively. The enhancement of photocatalytic activity is attributed to C₃N₄modification and a large electric dipole forming on the surface of InGaN QDs, which facilitate the separation and transfer of photo-generated carriers and thus promote CO₂reduction reaction. This work provides a promising strategy for the development of GaN-based photoanodes with superior stability and efficiency.

Mass spectrometric detection of fleeting neutral intermediates generated in electrochemical reactions

Towards the goal of on-line monitoring of transient neutral intermediates during electrochemical reactions, an electrochemistry-neutral reionization-mass spectrometry (EC-NR-MS) technique was developed in this work. The EC-NR setup consisted of a customized EC flow cell, a sonic spray ionization source, a heating tube, an ion deflector and an electrospray ionization source, which were respectively used for the precise control of the electrochemical reaction, solution nebulization, droplet desolvation, ion deflection and neutral intermediate ionization. Based on the EC-NR-MS approach, some long-sought neutral radicals including TPrA˙, DBAE˙ and TEOA˙, which belong to important reductive intermediates in electrochemiluminescence (ECL) reactions, were successfully identified which helps to clarify the previously unproven ECL reaction mechanism. These findings were also supported by spin-trapping experiments and the tandem MS technique. Accordingly, the EC-NR-MS method provides a direct solution for studying complicated electrochemical reactions, especially for detecting short-lived neutral radicals as well as ionic intermediates.

An electrochemistry-neutral reionization-mass spectrometry (EC-NR-MS) technique was developed for on-line studying the long-sought neutral radicals generated in electrochemical reactions.

New Cationic fac-[Re(CO)3(deeb)B2]+ Complex, Where B2 Is a Benzimidazole Derivative, as a Potential New Luminescent Dye for Proteins Separated by SDS-PAGE

Sodium-dodecyl-sulfate polyacrylamide gel electrophoresis (SDS-PAGE) can be used to separate proteins based mainly on their size such as in denaturing gels. Different staining methods have been reported to observe proteins in the gel matrix, where the most used dyes are generally anionic. Anionic dyes allow for interactions with protonated amino acids, retaining the dye in the proteins. Fluorescent staining is an alternative technique considered to be sensitive, safe, and versatile. Some anionic complexes based on d⁶ transition metals have been used for this purpose, where cationic dyes have been less explored in this context. In this work, we synthesized and characterized a new monocationic rhenium complex fac-[Re(CO)₃(deeb)B2]⁺ (where deeb is 4,4′-bis(ethoxycarbonyl)-2,2′-bpy and B2 is 2,4-di-tert-butyl-6-(3H-imidazo[4,5-c]pyridine-2-yl)phenol). We carried out a structural characterization of this complex by MS⁺, FTIR, ¹H NMR, D₂O exchange, and HHCOSY. Moreover, we carried out UV-Vis, luminescence, and cyclic voltammetry experiments to understand the effect of ligands on the complex’s electronic structure. We also performed relativistic theoretical calculations using the B3LYP/TZ2P level of theory and R-TDDFT within a dielectric continuum model (COSMO) to better understand electronic transitions and optical properties. We finally assessed the potential of fac-[Re(CO)₃(deeb)B2]⁺ (as well as the precursor fac-Re(CO)₃(deeb)Br and the free ligand B2) to stain proteins separated by SDS-PAGE. We found that only fac-[Re(CO)₃(deeb)B2]⁺ proved viable to be directly used as a luminescent dye for proteins, presumably due to its interaction with negatively charged residues in proteins and by weak interactions provided by B2. In addition, fac-[Re(CO)₃(deeb)B2]⁺ seems to interact preferentially with proteins and not with the gel matrix despite the presence of sodium dodecyl sulfate (SDS). In future applications, these alternative cationic complexes might be used alone or in combination with more traditional anionic compounds to generate counterion dye stains to improve the process.

Experimental determination of charge carrier dynamics in carbon nitride heterojunctions

Carbon nitride (CN_x) is an emerging photocatalyst with the potential to efficiently produce solar fuels. CN_x heterojunctions often show significant photocatalytic activity improvements. We review the charge carrier dynamics in a range of CN_x heterojunctions including carbon-based material, black phosphorus, Ru complexes, molybdenum sulphide and metal phosphides. Time resolved photoluminescence (TRPL) and transient absorption spectroscopy (TAS) were the most common techniques employed for experimental charge carrier dynamics measurements. The low photoluminescence quantum yield of CN_x appeared to limit the depth of conclusions from TRPL, with both lengthening and shortening of the TRPL lifetimes observed and attributed to enhanced charge separation. Overall, the charge carrier dynamics studies often showed a relative lifetime change of ∼2-fold and an activity improvement of >10-fold. We highlight the need for the use of a wider range of techniques to monitor the charge carrier dynamics for conclusive determination of photophysics-activity relationships and elucidation of improvement mechanisms.

Coordination Environment Prevents Access to Intraligand Charge-Transfer States through Remote Substitution in Rhenium(I) Terpyridinedicarbonyl Complexes

Six rhenium(I) κ³N-dicarbonyl complexes with 4'-(4-substituted phenyl)terpyridine ligands were evaluated in their ground and excited states. These complexes, bearing substituents of different electron-donating strengths-from CN to NMe₂-were studied by a combination of transient IR (TRIR), electrochemistry, and IR spectroelectrochemistry, as well as time-dependent density functional theory (TD-DFT). They exhibit panchromatic absorption and can act as stronger photoreductants than their tricarbonyl counterparts. The ground- and excited-state potentials, absorption maxima, and lifetimes (250-750 ps) of these complexes correlate well with the Hammett σ_p substituent constants, showing the systematic effect of remote substitution in the ligand framework. TRIR spectroscopy allowed us to assign the lowest singlet and triplet excited states to a metal-to-ligand charge-transfer (MLCT) character. This result contrasts our previous report on analogous κ²N-tricarbonyl complexes, where remote substitution switched the character from MLCT to intraligand charge transfer. With the help of TD-DFT calculations, we dissect the geometric and electronic effects of coordination of the third pyridine, local symmetries, and increasing conjugation length. These results give valuable insights for the design of complexes with long-lived triplet excited states and enhanced absorption throughout the visible spectrum, while showcasing the boundaries of the excited-state switching strategy via remote substitution.

Study of Excited States and Electron Transfer of Semiconductor-Metal-Complex Hybrid Photocatalysts for CO2 Reduction by Using Picosecond Time-Resolved Spectroscopies

A semiconductor-metal-complex hybrid photocatalyst was previously reported for CO₂ reduction; this photocatalyst is composed of nitrogen-doped Ta₂ O₅ as a semiconductor photosensitizer and a Ru complex as a CO₂ reduction catalyst, operating under visible light (>400 nm), with high selectivity for HCOOH formation of more than 75 %. The electron transfer from a photoactive semiconductor to the metal-complex catalyst is a key process for photocatalytic CO₂ reduction with hybrid photocatalysts. Herein, the excited-state dynamics of several hybrid photocatalysts are described by using time-resolved emission and infrared absorption spectroscopies to understand the mechanism of electron transfer from a semiconductor to the metal-complex catalyst. The results show that electron transfer from the semiconductor to the metal-complex catalyst does not occur directly upon photoexcitation, but that the photoexcited electron transfers to a new excited state. On the basis of the present results and previous reports, it is suggested that the excited state is a charge-transfer state located between shallow defects of the semiconductor and the metal-complex catalyst.

Photo-driven selective CO2 reduction by H2O into ethanol over Pd/Mn–TiO2: suitable synergistic effect between Pd and Mn sites

The Mn–Pd interaction of Pd/Mn–TiO₂ is a promising catalyst to enhance C₂H₅OH selectivity since Pd with a strong ability to capture and transport electrons and Mn with multifarious activation of the reactant (CO₂ and H₂O).

A closer look into the distance dependence of vibrational energy transfer on surfaces using 2D IR spectroscopy

Vibrational energy transfer (VET) between two isotopologues of [Re(dcb)(CO)₃Br] immobilized on a TiO₂ surface is studied with the help of 2D IR spectroscopy in dependence of surface coverage. To dilute the molecules on the surface, and thereby control the intermolecular distances, two different diluents have been used: a third isotopologue of the same molecule and 4-cyanobenzoic acid. As expected, the VET rate decreases with dilution. For a quantitative investigation of the distance dependence of the VET rate, we analyze the data based on an excitonic model. This model reveals the typical 1/r⁶-distance dependence for a dimer of a donor and acceptor, similar to the nuclear Overhauser effect in NMR spectroscopy or Förster resonant energy transfer in electronic spectroscopy. However, VET becomes a collective phenomenon on the surface, with the existence of a network of coupled molecules and its disappearance below a percolation threshold, dominating the concentration dependence of the VET rate.

Living Long and Prosperous: Productive Intraligand Charge-Transfer States from a Rhenium(I) Terpyridine Photosensitizer with Enhanced Light Absorption

The ground- and excited-state properties of six rhenium(I) κ²N-tricarbonyl complexes with 4'-(4-substituted-phenyl)terpyridine ligands bearing substituents of different electron-donating abilities were evaluated. Significant modulation of the electrochemical potentials and a nearly 4-fold variation of the triplet metal-to-ligand charge-transfer (³MLCT) lifetimes were observed upon going from CN to OMe. With the more electron-donating NMe₂ group, we observed in the κ²N complex the appearance of a very strong absorption band, red-shifted by ca. 100 nm with respect to the other complexes. This was accompanied by a dramatic enhancement of the excited-state lifetime (380 vs 1.5 ns), and a character change from ³MLCT to intraligand charge transfer (³ILCT), despite the remote location of the substituent. The dynamics and character of the excited states of all complexes were assigned by combining transient IR spectroscopy, IR spectroelectrochemistry, and (time-dependent) density functional theory calculations. Selected complexes were evaluated as photosensitizers for hydrogen production, with the κ²N-NMe₂ complex resulting in a stable and efficient photocatalytic system reaching TON_Re values of over 2100, representing the first application of the ³ILCT state of a rhenium(I) carbonyl complex in a stable photocatalytic system.

Recent Progresses on Metal Halide Perovskite-Based Material as Potential Photocatalyst

Recent years have witnessed an incredibly high interest in perovskite-based materials. Among this class, metal halide perovskites (MHPs) have attracted a lot of attention due to their easy preparation and excellent opto-electronic properties, showing a remarkably fast development in a few decades, particularly in solar light-driven applications. The high extinction coefficients, the optimal band gaps, the high photoluminescence quantum yields and the long electron–hole diffusion lengths make MHPs promising candidates in several technologies. Currently, the researchers have been focusing their attention on MHPs-based solar cells, light-emitting diodes, photodetectors, lasers, X-ray detectors and luminescent solar concentrators. In our review, we firstly present a brief introduction on the recent discoveries and on the remarkable properties of metal halide perovskites, followed by a summary of some of their more traditional and representative applications. In particular, the core of this work was to examine the recent progresses of MHPs-based materials in photocatalytic applications. We summarize some recent developments of hybrid organic–inorganic and all-inorganic MHPs, recently used as photocatalysts for hydrogen evolution, carbon dioxide reduction, organic contaminant degradation and organic synthesis. Finally, the main limitations and the future potential of this new generation of materials have been discussed.

Cooperation of cerium oxide nanoparticles and soluble molecular catalysts for alcohol oxidation

Nano-cerium oxide and organometallic catalysts cooperate in anaerobic and aerobic alcohol oxidations.

Semiconductor Quantum Dots: An Emerging Candidate for CO2 Photoreduction

As one of the most critical approaches to resolve the energy crisis and environmental concerns, carbon dioxide (CO₂ ) photoreduction into value-added chemicals and solar fuels (for example, CO, HCOOH, CH₃ OH, CH₄ ) has attracted more and more attention. In nature, photosynthetic organisms effectively convert CO₂ and H₂ O to carbohydrates and oxygen (O₂ ) using sunlight, which has inspired the development of low-cost, stable, and effective artificial photocatalysts for CO₂ photoreduction. Due to their low cost, facile synthesis, excellent light harvesting, multiple exciton generation, feasible charge-carrier regulation, and abundant surface sites, semiconductor quantum dots (QDs) have recently been identified as one of the most promising materials for establishing highly efficient artificial photosystems. Recent advances in CO₂ photoreduction using semiconductor QDs are highlighted. First, the unique photophysical and structural properties of semiconductor QDs, which enable their versatile applications in solar energy conversion, are analyzed. Recent applications of QDs in photocatalytic CO₂ reduction are then introduced in three categories: binary II-VI semiconductor QDs (e.g., CdSe, CdS, and ZnSe), ternary I-III-VI semiconductor QDs (e.g., CuInS₂ and CuAlS₂ ), and perovskite-type QDs (e.g., CsPbBr₃ , CH₃ NH₃ PbBr₃ , and Cs₂ AgBiBr₆ ). Finally, the challenges and prospects in solar CO₂ reduction with QDs in the future are discussed.

Design of atomically dispersed catalytic sites for photocatalytic CO2 reduction

Photocatalytic conversion of CO₂ into carbonaceous chemical fuels and building blocks is an intriguing strategy for solving fossil energy crisis and reducing CO₂ emission. Recently, development of atomically dispersed catalytic sites for photocatalytic CO₂ reduction has sparked tremendous interest as their coordinatively unsaturated states, tunable electronic structures and well-defined active sites provide versatile knobs for tuning CO₂ conversion. While this Minireview mainly highlights recent key developments in this important research field and elucidates the common fundamentals behind various materials systems, it also provides insights into the future development and emphasizes opportunities and challenges.

Metal-Complex/Semiconductor Hybrid Photocatalysts and Photoelectrodes for CO2 Reduction Driven by Visible Light

CO₂ reduction to carbon feedstocks using heterogeneous photocatalysts is an attractive means of addressing both climate change and the depletion of fossil fuels. Of particular importance is the development of a photosystem capable of functioning in response to visible light, which accounts for the majority of the solar spectrum, representing a kind of artificial photosynthesis. Hybrid systems comprising a metal complex and a semiconductor are promising because of the excellent electrochemical (and/or photocatalytic) activity of metal complexes during CO₂ reduction and the ability of semiconductors to efficiently oxidize water to molecular O₂ . Here, the development of hybrid photocatalysts and photoelectrodes for CO₂ reduction in combination with water oxidation is described.

Heterogenized Molecular Catalysts: Vibrational Sum-Frequency Spectroscopic, Electrochemical, and Theoretical Investigations

Rhenium and manganese bipyridyl tricarbonyl complexes have attracted intense interest for their promising applications in photocatalytic and electrocatalytic CO₂ reduction in both homogeneous and heterogenized systems. To date, there have been extensive studies on immobilizing Re catalysts on solid surfaces for higher catalytic efficiency, reduced catalyst loading, and convenient product separation. However, in order for the heterogenized molecular catalysts to achieve the combination of the best aspects of homogeneous and heterogeneous catalysts, it is essential to understand the fundamental physicochemical properties of such heterogeneous systems, such as surface-bound structures of Re/Mn catalysts, substrate-adsorbate interactions, and photoinduced or electric-field-induced effects on Re/Mn catalysts. For example, the surface may act to (un)block substrates, (un)trap charges, (de)stabilize particular intermediates (and thus affect scaling relations), and shift potentials in different directions, just as protein environments do. The close collaboration between the Lian, Batista, and Kubiak groups has resulted in an integrated approach to investigate how the semiconductor or metal surface affects the properties of the attached catalyst. Synthetic strategies to achieve stable and controlled attachment of Re/Mn molecular catalysts have been developed. Steady-state, time-resolved, and electrochemical vibrational sum-frequency generation (SFG) spectroscopic studies have provided insight into the effects of interfacial structures, ultrafast vibrational energy relaxation, and electric field on the Re/Mn catalysts, respectively. Various computational methods utilizing density functional theory (DFT) have been developed and applied to determine the molecular orientation by direct comparison to spectroscopy, unravel vibrational energy relaxation mechanisms, and quantify the interfacial electric field strength of the Re/Mn catalyst systems. This Account starts with a discussion of the recent progress in determining the surface-bound structures of Re catalysts on semiconductor and Au surfaces by a combined vibrational SFG and DFT study. The effects of crystal facet, length of anchoring ligands, and doping of the semiconductor on the bound structures of Re catalysts and of the substrate itself are discussed. This is followed by a summary of the progress in understanding the vibrational relaxation (VR) dynamics of Re catalysts covalently adsorbed on semiconductor and metal surfaces. The VR processes of Re catalysts on TiO₂ films and TiO₂ single crystals and a Re catalyst tethered on Au, particularly the role of electron-hole pair (EHP)-induced coupling on the VR of the Re catalyst bound on Au, are discussed. The Account also summarizes recent studies in quantifying the electric field strength experienced by the catalytically active site of the Re/Mn catalyst bound on a Au electrode based on a combined electrochemical SFG and DFT study of the Stark tuning of the CO stretching modes of these catalysts. Finally, future research directions on surface-immobilized molecular catalyst systems are discussed.

A donor-chromophore-catalyst assembly for solar CO2 reduction

We describe here the preparation and characterization of a photocathode assembly for CO₂ reduction to CO in 0.1 M LiClO₄ acetonitrile.

We describe here the preparation and characterization of a photocathode assembly for CO₂ reduction to CO in 0.1 M LiClO₄ acetonitrile. The assembly was formed on 1.0 μm thick mesoporous films of NiO using a layer-by-layer procedure based on Zr(iv)–phosphonate bridging units. The structure of the Zr(iv) bridged assembly, abbreviated as NiO|-DA-RuCP₂²⁺-Re(i), where DA is the dianiline-based electron donor (N,N,N′,N′-((CH₂)₃PO₃H₂)₄-4,4′-dianiline), RuCP²⁺ is the light absorber [Ru((4,4′-(PO₃H₂CH₂)₂-2,2′-bipyridine)(2,2′-bipyridine))₂]²⁺, and Re(i) is the CO₂ reduction catalyst, Re^I((4,4′-PO₃H₂CH₂)₂-2,2′-bipyridine)(CO)₃Cl. Visible light excitation of the assembly in CO₂ saturated solution resulted in CO₂ reduction to CO. A steady-state photocurrent density of 65 μA cm^–2 was achieved under one sun illumination and an IPCE value of 1.9% was obtained with 450 nm illumination. The importance of the DA aniline donor in the assembly as an initial site for reduction of the RuCP²⁺ excited state was demonstrated by an 8 times higher photocurrent generated with DA present in the surface film compared to a control without DA. Nanosecond transient absorption measurements showed that the expected reduced one-electron intermediate, RuCP⁺, was formed on a sub-nanosecond time scale with back electron transfer to the electrode on the microsecond timescale which competes with forward electron transfer to the Re(i) catalyst at t_1/2 = 2.6 μs (k_ET = 2.7 × 10⁵ s^–1).

Electron injection into titanium dioxide by panchromatic dirhodium photosensitizers with low energy red light

Two new Rh₂(ii,ii) dyes were synthesized and anchored to TiO₂ for charge injection upon low energy irradiation.

Role of 2nd sphere H-bonding residues in tuning the kinetics of CO2 reduction to CO by iron porphyrin complexes

Iron porphyrins are potential catalysts for the electrocatalytic and photocatalytic reduction of CO2. It has been recently established that the reduction of CO2 by an iron porphyrin complex with a hydrogen bonding distal pocket involves at least two intermediates: a Fe(ii)-CO22- and a Fe(ii)-COOH species. A distal hydrogen bonding interaction was found to be key in determining the stability of these intermediates and affecting both the selectivity and rate of CO2 reduction. In this report, a series of iron porphyrins that vary only in the distal H-bonding network are further investigated and these exhibit turnover frequencies (TOFs) ranging from 1.0 s-1 to 103 s-1. The experimental TOFs correlate with the H-bonding ability of the distal superstructure of these iron porphyrin complexes and analysis suggests that H-bonding alone can tune the rate of CO2 reduction by as much as 1000 fold. DFT calculations provide a detailed insight into how the, apparently weak, 2nd sphere interactions lead to efficient CO2 activation for reduction. The ability to tune CO2 reduction rates by changing the H-bonding residue instead of the acid source is a convenient way to tune CO2 reduction electrocatalysis without compromising selectivity by introducing competitive hydrogen evolution reaction or formate generation.