N,B-Bidentate Boryl Ligand-Supported Iridium Catalyst for Efficient Functional-Group-Directed C–H Borylation

The Difference in Ir-Catalyzed C(sp2)-H and C(sp3)-H Bond Activation Assisted by a Directing Group: Cyclometalation via Cis- or Trans-Chelation?

Iridium-catalyzed C-H borylation of aromatic and aliphatic hydrocarbons assisted by a directing group was theoretically investigated. Density functional theory (DFT) calculations revealed both Ir-catalyzed C(sp2)-H and C(sp3)-H borylations via an IrIII/IrV catalytic cycle, where the tetra-coordinated (C, N)IrIII(Bpin)2 complex with two vacant sites is an active species. Dramatically, the orientation of cyclometalation for C(sp2)-H bond activation assisted by a directing group is different from the C(sp3)-H one. The activation energy (ΔG°‡ = 28.5 kcal mol-1) of the C(sp2)-H bond via trans-chelation to form cyclometalation is lower than that (41.4 kcal mol-1) via cis-chelation. In contrast, the ΔG°‡ (26.6 kcal mol-1) of the C(sp3)-H bond via cis-chelation to form cyclometalation is lower than that (34.3 kcal mol-1) via trans-chelation. In addition, the rate-determining step of Ir-catalyzed C(sp2)-H borylation is oxidative addition of the C(sp2)-H bond, while that of C(sp3)-H analogues is hydride migration. Such differences arise from not only the differences in the steric hindrance of the C(sp2) and secondary C(sp3) atoms but also the differences in the trans effect and steric effect of the two vacant sites of active species. These findings were expected to facilitate further studies on the design and synthesis of innovative ligands for Ir-catalyzed C-H borylation.

Repurposing a supramolecular iridium catalyst via secondary Zn⋯O[double bond, length as m-dash]C weak interactions between the ligand and substrate leads to ortho-selective C(sp2)-H borylation of benzamides with unusual kinetics

The iridium-catalyzed C-H borylation of benzamides typically leads to meta and para selectivities using state-of-the-art iridium-based N,N-chelating bipyridine ligands. However, reaching ortho selectivity patterns requires extensive trial-and-error screening via molecular design at the ligand first coordination sphere. Herein, we demonstrate that triazolylpyridines are excellent ligands for the selective iridium-catalyzed ortho C-H borylation of tertiary benzamides and, importantly, we demonstrate the almost negligible effect of the first coordination sphere in the selectivity, which is so far unprecedented in iridium C-H bond borylations. Remarkably, the activity is dramatically enhanced by exploiting a remote Zn⋯O[double bond, length as m-dash]C weak interaction between the substrate and a rationally designed molecular-recognition site in the catalyst. Kinetic studies and DFT calculations indicate that the iridium-catalyzed C-H activation step is not rate-determining, this being unique for remotely controlled C-H functionalizations. Consequently, a previously established supramolecular iridium catalyst designed for meta-borylation of pyridines is now compatible with the ortho-borylation of benzamides, a regioselectivity switch that is counter-intuitive regarding precedents in the literature. In addition, we highlight the role of the cyclohexene additive in avoiding the formation of undesired side-products as well as accelerating the HBpin release event that precedes the catalyst regeneration step, which is highly relevant for the design of powerful and selective iridium borylating catalysts.

The Versatile and Strategic O-Carbamate Directed Metalation Group in the Synthesis of Aromatic Molecules: An Update

The aryl O-carbamate (ArOAm) group is among the strongest of the directed metalation groups (DMGs) in directed ortho metalation (DoM) chemistry, especially in the form Ar-OCONEt2. Since the last comprehensive review of metalation chemistry involving ArOAms (published more than 30 years ago), the field has expanded significantly. For example, it now encompasses new substrates, solvent systems, and metalating agents, while conditions have been developed enabling metalation of ArOAm to be conducted in a green and sustainable manner. The ArOAm group has also proven to be effective in the anionic ortho-Fries (AoF) rearrangement, Directed remote metalation (DreM), iterative DoM sequences, and DoM-halogen dance (HalD) synthetic strategies and has been transformed into a diverse range of functionalities and coupled with various groups through a range of cross-coupling (CC) strategies. Of ultimate value, the ArOAm group has demonstrated utility in the synthesis of a diverse range of bioactive and polycyclic aromatic compounds for various applications.

A Hydrazone Ligand for Iridium-Catalyzed C-H Borylation: Enhanced Reactivity and Selectivity for Fluorinated Arenes

Ir-catalyzed C-H borylations of fluorinated and cyanated arenes with high meta-to-F/CN are described. Use of a dipyridyl hydrazone framework as the ancillary ligand and pinacolborane (HBpin) as the functionalizing reagent generates catalysts that are significantly more active and selective than 4,4'-di-tert-butyl-2,2'-bipyridine (dtbpy) for both electron-deficient and electron-rich substrates. Investigation of the ligand framework resulted in the observation of formal N-borylation of the hydrazone by HBpin, as evidenced by NMR spectroscopy and X-ray crystallography. Subsequent stoichiometric reactions of this adduct with an iridium precatalyst revealed the formation of an unusual IrI hydrazido. Isolation and use of this hydrazido reproduce the selectivity of in situ generated catalysts, suggesting that it leads to formation of the active species.

Iridium-Catalyzed Ortho-Selective C-H Borylation of Aryl Ketones with Transient Imine Ligands

Ortho-selective C-H borylation of aromatic ketones has not been extensively explored. Herein, we report the iridium-catalyzed ortho-selective C-H borylation of aromatic ketones using in situ-formed imine as the ligand. Good compatibility is observed for various substituted acetophenones and other aromatic ketones, and corresponding products are obtained with medium to excellent yields.

Copper-catalyzed remote double functionalization of allenynes

Addition reactions of molecules with conjugated or non-conjugated multiple unsaturated C-C bonds are very attractive yet challenging due to the versatile issues of chemo-, regio-, and stereo-selectivities. Especially for the readily available conjugated allenyne compounds, the reactivities have not been explored. The first example of copper-catalyzed 2,5-hydrofunctionalization and 2,5-difunctionalization of allenynes, which provides a facile access to versatile conjugated vinylic allenes with a C-B or C-Si bond, has been developed. This mild protocol has a broad substrate scope tolerating many synthetically useful functional groups. Due to the highly functionalized nature of the products, they have been demonstrated as platform molecules for the efficient syntheses of monocyclic products including poly-substituted benzenes, bicyclic compounds, and highly functionalized allene molecules.

Design and Application of New Pyridine-Derived Chiral Ligands in Asymmetric Catalysis

ConspectusThe innovation of chiral ligands has been crucial for the asymmetric synthesis of functional molecules, as demonstrated by several types of widely applied "privileged" ligands. In this context, chiral pyridine-derived ligands, by far some of the oldest and most widely utilized ligands in catalysis, have attracted considerable research interest in the past half-century. However, the development of broadly applicable chiral pyridine units (CPUs) has been plagued by several intertwining challenges, thus delaying advancements in many asymmetric reactions.This Account aims to summarize the recent progress in new CPU-containing ligands, focusing on a rationally designed, modular, and tunable CPU developed in our laboratory. A significant problem thwarting conventional designs is the paradox between broad reactivity and stereoselectivity; that is, while enhanced stereoselectivity may be achieved by introducing chiral elements close to the N atom, the concomitant increase in local steric hindrance often limits catalytic activity and scope. Our newly developed CPU features a rigid [6-5-3] fused-ring framework and a tunable spirocyclic ketal side wall. The well-defined three-dimensional structure minimizes local (inner layer) steric hindrance and tunes the peripheral environment (outer layer) by remote substituents, thus securing reactivity and stereoselectivity. Different chelating ligands were readily assembled using this chiral structural module, with applications in mechanistically diverse transition-metal-catalyzed reactions. Thus, a series of chiral 2,2'-bipyridine ligands were successfully employed in the development of a general, efficient, and highly enantioselective nickel-catalyzed intermolecular reductive addition, Ullmann coupling of ortho-chlorinated aryl aldehydes, and carboxylation of benzylic (pseudo)halides with CO2. Notably, these chiral 2,2'-bipyridine ligands exhibited superior catalytic activity in the reactions compared to common N-based ligands. In addition, highly enantioselective iridium-catalyzed C-H borylation was developed using a CPU-containing N,B-bidentate ligand. Furthermore, mechanistically challenging, additive-free, and broad-scope transfer hydrogenative direct asymmetric reductive amination was achieved using a half-sandwich iridium catalyst supported by a chiral N,C-bidentate ligand. The new ligands demonstrated excellent performance in securing high catalytic activity and stereoselectivity, which, when combined with experimental and computational mechanistic investigations, supported the "double-layer control" design concept.Considering the broad applications of pyridine-derived ligands, the research progress described herein should inspire the creation of novel chiral catalysts and drive the development of many catalytic asymmetric reactions.

Catalyst-Free Regioselective Diborylation of Aryllithium with Tetra(o-tolyl)diborane(4)

A catalyst-free 1,2-diborylation of aryllithium with tetra(o-tolyl)diborane(4) has been achieved, giving a series of 1,2-diborylaryl lithium species in excellent yields under mild reaction conditions, which leads to 1,2-di(tolyl)borylarenes in 60-91 % yields upon treatment with the hydride-abstracting reagent. In these transformations, one sp2 C-H of arene is activated and both boryl units are utilized to build two new (sp2 )C-B bonds. This represents a new strategy for selective arene diborylation. Density functional theory (DFT) calculations suggest that an aromatic nucleophilic substitution is a key step in the formation of the products.

Regiochemical Switching in Ir-Catalyzed C-H Borylation by Altering Ligand Loadings of N,B-Type Diboron Species

Traditional reaction conditions in Ir-catalyzed C-H borylation consist of a 2:1 ligand to Ir metal ratio, affording C(sp2)-H borylation at the least sterically hindered position. We found that lowering the ligand to metal ratio of a N,B-type diboron (BB) preligand in respect to the IrI precatalyst to 0.5:1 affords the chelate controlled ortho product. Switching from steric-directed to chelate-directed products is shown for various substituted arenes and (hetero)arenes containing Lewis-basic functionalities. This work offers the first example of obtaining complementary regioisomers as the major product by altering the ligand loading in CHB.

Metal-Free Directed Site-Selective Csp3 -H Borylation of Saturated Cyclic Amines

The borylation of Csp3 -H bonds is a challenging transformation that is typically restricted to transition metal catalysis. Herein, we report the site-selective metal-free Csp3 -H borylation of saturated cyclic amines. It is possible to selectively borylate piperidine derivatives at the α or β positions according to the reaction conditions. The mechanism was supported by NMR spectroscopy, calorimetry experiments and density functional theory (DFT) computations. It suggests that the piperidine is dehydrogenated by complexation with BBr3 to produce an enamine intermediate, which is in turn borylated at either the α or β position according to the reaction conditions.

Iridium-Catalyzed ortho-Selective Borylation of Aromatic Amides Enabled by 5-Trifluoromethylated Bipyridine Ligands

Iridium-catalyzed borylations of aromatic C-H bonds are highly attractive transformations because of the diversification possibilities offered by the resulting boronates. These transformations are best carried out using bidentate bipyridine or phenanthroline ligands, and tend to be governed by steric factors, therefore resulting in the competitive functionalization of meta and/or para positions. We have now discovered that a subtle change in the bipyridine ligand, namely, the introduction of a CF₃ substituent at position 5, enables a complete change of regioselectivity in the borylation of aromatic amides, allowing the synthesis of a wide variety of ortho-borylated derivatives. Importantly, thorough computational studies suggest that the exquisite regio- and chemoselectivity stems from unusual outer-sphere interactions between the amide group of the substrate and the CF₃ -substituted aryl ring of the bipyridine ligand.

Allyl phenyl selenides as H2O2 acceptors to develop ROS-responsive theranostic prodrugs

Reactive oxygen species (ROS)-responsive prodrugs have received significant attention due to their capacity to target tumors to relieve the side effects caused by chemotherapy. Herein, a series of novel H₂O₂-activated theranostic prodrugs (CPTSe1-CPTSe7) were developed containing allyl phenyl selenide moieties as H₂O₂ acceptors. Compared with conventional boronate ester-based prodrug CPT-B, CPTSe1 was more stable in human plasma and showed a more complete release of camptothecin (CPT) in H₂O₂ inducing experiment. The selectively activated fluorescence signals of CPTSe1 in tumor cells make it useful for real-time monitoring of CPT release and H₂O₂ detection. Furthermore, excellent selectivity of CPTSe1 was achieved for tumor cells over normal cells. Our results provide a new platform for the development of H₂O₂-responsive theranostic prodrugs.

Iridium and rhodium complexes bearing a silyl-bipyridine pincer ligand: synthesis, structures and catalytic activity for C-H borylation of arenes

Unsaturated 16-electron iridium and rhodium complexes bearing a silyl-bipyridine-based SiNN-pincer ligand (Bpy^SiNN) were synthesised and characterised by X-ray crystallography and NMR spectroscopy. The iridium-Bpy^SiNN complex facilitated the catalytic C(sp²)-H borylation of arenes to give arylboronate esters in high yields (≥93%) under mild conditions (∼40 °C).

Asymmetric C(sp3)-H borylation: an update

Chiral organoboronates have emerged as a key intermediate in the development of pharmaceuticals and materials science. Therefore, several attempts have been made to design various synthetic methods to easily furnish these compounds during the past few decades. Inter alia, asymmetric catalysis has been increasing rapidly as a viable, practical and beneficial strategy for their preparation. In this respect, recent years have witnessed significant progress in aliphatic C-H borylation as the generated carbon-boron bonds are largely utilized to produce other carbon-carbon, carbon-nitrogen and carbon-oxygen bonds. This review presents a detailed overview and analysis of transition metal-catalyzed asymmetric C(sp³)-H borylation strategies. Overall, it assembles all the recent developments in this particular synthetic avenue up to March 2022.

Metal-catalysed C-H bond activation and borylation

Transition metal-catalysed direct borylation of hydrocarbons via C-H bond activation has received a remarkable level of attention as a popular reaction in the synthesis of organoboron compounds owing to their synthetic versatility. While controlling the site-selectivity was one of the most challenging issues in these C-H borylation reactions, enormous efforts of several research groups proved instrumental in dealing with selectivity issues that presently reached an impressive level for both proximal and distal C-H bond borylation reactions. For example, in the case of ortho C-H bond borylation reactions, innovative methodologies have been developed either by the modification of the directing groups attached with the substrates or by creating new catalytic systems via the design of new ligand frameworks. Whereas meta and para selective C-H borylations remained a formidable challenge, numerous innovative concepts have been developed within a very short period of time by the development of new catalytic systems with the employment of various noncovalent interactions. Moreover, significant advancements have occurred for aliphatic C(sp³)-H borylations as well as enantioselective borylations. In this review article, we aim to discuss and summarize the different approaches and findings related to the development of directed proximal ortho, distal meta/para, aliphatic (racemic and enantioselective) borylation reactions since 2014. Additionally, considering the C-H borylation reaction as one of the most important mainstream reactions, various applications of this C-H borylation reaction toward the synthesis of natural products, therapeutics, and applications in materials chemistry will be summarized in the last part of this review article.

Yttrium-Catalyzed ortho-Selective C-H Borylation of Pyridines with Pinacolborane

This work reports a site-selective C-H borylation of pyridines at the ortho-position with pinacolborane enabled by an yttrocene catalyst. The reaction provides a new family of 2-pyridyl boronates with a broad substrate scope and high atom efficiency. The resultant boronates were able to undergo a variety of transformations, e.g., oxidation, Suzuki-Miyaura coupling, Chan-Lam amination and etherification. Catalytic intermediates, including ortho-C-H metalated and borylated complexes, were isolated from stoichiometric experiments and confirmed by single-crystal X-ray diffraction.

Triazene as the Directing Group Achieving Highly Ortho-Selective Diborylation and Sequential Functionalization

This study describes a regioselective ortho,ortho'-diborylation of aromatic triazenes catalyzed by [Ir(OMe)(cod)]₂ in near-quantitative yields without an additional ligand. Aromatic triazenes act as both substrates and ligands. The X-ray structures of 2a and 2p indicate that the monoborylation products could promote the occurrence of diborylation. The synthesized triazene-substituted diboronate esters could undergo a variety of transformations including directing group removal. One-pot sequential modification provides a short entry to densely functionalized arenes.

Design and Synthesis of Tunable Chiral 2,2'-Bipyridine Ligands: Application to the Enantioselective Nickel-Catalyzed Reductive Arylation of Aldehydes

A new class of chiral 2,2'-bipyridine ligands, SBpy, featuring minimized short-range steric hindrance and structural tunability was rationally designed and developed, and the effectiveness was demonstrated in the first highly enantioselective Ni-catalyzed addition of aryl halides to aldehydes. In comparison with known approaches using preformed aryl metallic reagents, this reaction is more step-economical and functional group tolerant. The reaction mechanism and a model of stereocontrol were proposed based on experimental and computational results.

Catalysis with Diboron(4)/Pyridine: Application to the Broad-Scope [3 + 2] Cycloaddition of Cyclopropanes and Alkenes

In contrast to the extensive but non-recyclable use of tetraalkoxydiboron(4) compounds as stoichiometric reagents in diverse reactions, this article reports an atom-economical reaction using a commercial diboron(4) as the catalyst. The key to success was designing a catalytic cycle for radical [3 + 2] cycloaddition involving a pyridine cocatalyst to generate from the diboron(4) catalyst and reversibly mediate the transfer of boronyl radicals. In comparison with known [3 + 2] cycloaddition with transition metal-based catalysts, the current reaction features not only metal-free conditions, inexpensive and stable catalysts, and simple operation but also remarkably broadened substrate scope. In particular, previously unusable cyclopropyl ketones without an activating group and/or alkenes with 1,2-disubstitution and 1,1,2-trisubstitution patterns were successfully used for the first time. Consequently, challenging cyclopentane compounds with various levels of substitution (65 examples, 57 new products, up to six substituents at all five ring atoms) were readily prepared in generally high to excellent yield and diastereoselectivity. The reaction was also successfully applied in concise formal synthesis of an anti-obesity drug and building natural product-like complex bridged or spirocyclic compounds. Mechanistic experiments and computational investigation support the proposed radical relay catalysis featuring a pyridine-assisted boronyl radical catalyst. Overall, this work demonstrates the first approach to use tetraalkoxydiboron(4) compounds as catalysts and may lead to the development of new, green, and efficient transition metal-like boron-catalyzed organic reactions.

A stable silylborane with diminished boron Lewis acidity

A new dimethyl(phenyl)silylborane having a naphthalene-1,8-diaminato (dan) substituent on the boron center, PhMe₂Si-B(dan), was synthesized. Owing to the diminished boron Lewis acidity, it is highly stable toward air. Synthetic application of the silylborane to catalytic silylboration and silylation of alkynes is also described.

Catalyst Engineering through Heterobidentate (N–X-Type) Ligand Design for Iridium-Catalyzed Borylation

Iridium-catalyzed C–H activation and borylation reactions operate under mild conditions that enable easy and atom-economical installation of the versatile boronate ester group in (het)arenes and alkanes. The standard catalytic system for iridium-catalyzed borylation uses [Ir(cod)(OMe)]2 as a precatalyst, a bipyridine type ligand, and B2pin2 or HBpin as the borylating agent. Initially, a bipyridine-ligated trisboryl–iridium complex is generated that enables the borylation reaction and the regioselectivity is mainly governed by the sterics of substituents present on the ring. As a result, monosubstituted and 1,2-disubstituted arenes give mixtures of isomers. Significant efforts by several research groups have overcome the selectivity issue for directed proximal C–H borylation by introducing a directing group and newly developed ligands. This short review aims to summarize recent elegant discoveries in directed C(sp2)–H and C(sp3)–H borylation by using heterobidentate ligand (P/N–Si, N–B, and N–C) coordinated iridium catalysts.

1 Introduction

2 Iridium-Catalyzed Directed C–H Borylation of C(sp2)–H Bonds

3 Iridium-Catalyzed Directed C–H Borylation of C(sp3)–H Bonds

4 Conclusions

Enantioselective synthesis of cyclic α-aminoboronates via copper-catalyzed dearomative borylation of 4-quinolinols

A highly enantioselective and regioselective dearomative borylation of 4-quinolinols was developed using a Cu(I)/(R,R)-Ph-BPE catalyst for efficient synthesis of unprecedented heterocyclic α-amino boronates, a new class of compounds potentially relevant to drug discovery, in generally excellent yields and enantioselectivities. The products were also useful intermediates for highly functionalized tetrahydroquinolines and cyclic α-aminoboronate derivatives.

Amide directed iridium C(sp3)-H borylation catalysis with high N-methyl selectivity

A bidentate monoanionic ligand system was developed to enable iridium catalyzed C(sp³)-H activation borylation of N-methyl amides. Borylated amides were obtained in moderate to good isolated yields, and exclusive mono-borylation allowed the amide to be the limiting reagent. Selectivity for C(sp³)-H activation was demonstrated in the presence of sterically available C(sp³)-H bonds. Competitive kinetic isotope studies revealed a large primary isotope effect, implicating C-H activation as the rate limiting step.

Development of Chiral Ligands for the Transition-Metal-Catalyzed Enantioselective Silylation and Borylation of C-H Bonds

Enantioselective reactions that install functional groups at the positions of unactivated C-H bonds can be envisioned to produce intermediates for the synthesis of the active ingredients in pharmaceuticals and agrochemicals directly from simple feedstocks. Among these C-H bond functionalization reactions, those that form carbon-silicon (C-Si) and carbon-boron (C-B) bonds have been pursued because the products of these reactions can be converted to those containing a wide range of functional groups and because compounds containing silicon and boron possess unique properties that can be valuable for medicinal and materials chemistry. Although the silylation and borylation of C-H bonds have undergone extensive development during the past two decades, enantioselective versions of these reactions were not known until a few years ago. In this Minireview, we present the rapid development of enantioselective silylation and borylation of C-H bonds, with an emphasis on the design and development of the types of chiral ligands needed to achieve these reactions and an intention to inspire an expansion of these types of transformations.

Rhodium Indenyl NHC and Fluorenyl-Tethered NHC Half-Sandwich Complexes: Synthesis, Structures and Applications in the Catalytic C-H Borylation of Arenes and Alkanes

Indenyl (Ind) rhodium N-heterocyclic carbene (NHC) complexes [Rh(η5 -Ind)(NHC)(L)] were synthesised for 1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazol-2-ylidene (SIPr) with L=C2 H4 (1), CO (2 a) and cyclooctene (COE; 3), for 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene (SIMes) with L=CO (2 b) and COE (4), and 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes) with L=CO (2 c) and COE (5). Reaction of SIPr with [Rh(Cp*)(C2 H4 )2 ] did not give the desired SIPr complex, thus demonstrating the "indenyl effect" in the synthesis of 1. Oxidative addition of HSi(OEt)3 to 3 proceeded under mild conditions to give the Rh silyl hydride complex [Rh(Ind){Si(OEt)3 }(H)(SIPr)] (6) with loss of COE. Tethered-fluorenyl NHC rhodium complexes [Rh{(η5 -C13 H8 )C2 H4 N(C)C2 Hx NR}(L)] (x=4, R=Dipp, L=C2 H4 : 11; L=COE: 12; L=CO: 13; R=Mes, L=COE: 14; L=CO: 15; x=2, R=Me, L=COE: 16; L=CO: 17) were synthesised in low yields (5-31 %) in comparison to good yields for the monodentate complexes (49-79 %). Compounds 3 and 1, which contain labile alkene ligands, were successful catalysts for the catalytic borylation of benzene with B2 pin2 (Bpin=pinacolboronate, 97 and 93 % PhBpin respectively with 5 mol % catalyst, 24 h, 80 °C), with SIPr giving a more active catalyst than SIMes or IMes. Fluorenyl-tethered NHC complexes were much less active as borylation catalysts, and the carbonyl complexes were inactive. The borylation of toluene, biphenyl, anisole and diphenyl ether proceeded to give meta substitutions as the major product, with smaller amounts of para substitution and almost no ortho product. The borylation of octane and decane with B2 pin2 at 120 and 140 °C, respectively, was monitored by 11 B NMR spectroscopy, which showed high conversions into octyl and decylBpin over 4-7 days, thus demonstrating catalysed sp3 C-H borylation with new piano stool rhodium indenyl complexes. Irradiation of the monodentate complexes with 400 or 420 nm light confirmed the ready dissociation of C2 H4 and COE ligands, whereas CO complexes were inert. Evidence for C-H bond activation in the alkyl groups of the NHC ligands was obtained.

Ir-catalyzed proximal and distal C-H borylation of arenes

Over the past two decades, the C-H bond activation and functionalization reaction has been known as a prevailing method for the construction of carbon-carbon and carbon-heteroatom bonds using various transition metal catalysts. In this context, the iridium-catalyzed C-H bond activation and borylation reaction is one of the most valued methods. However, the major challenge in these borylation reactions is how to control the proximal (ortho) and distal (meta and para) selectivity. Interestingly, while so many approaches are now available for the proximal ortho selective borylation of arenes, borylation at the distal meta and or para position of arenes remains still challenging. Only a few approaches have been reported so far in the literature employing iridium catalysis. In this feature article, we have demonstrated some of the recent discoveries from our laboratories for the proximal (ortho) and distal (meta and para) selective borylation reactions. Moreover, some of the recent catalyst engineering discoveries for the selective proximal ortho borylation reactions for a diverse class of substrates have also been discussed. The discussion part of several other pioneering reports is limited due to the lack of scope of this feature article.

A Ni0 σ-Borane Complex Bearing a Rigid Bidentate Borane/Phosphine Ligand: Boryl Complex Formation by Oxidative Dehydrochloroborylation and Catalytic Activity for Ethylene Polymerization

While of interest, synthetically feasible access to boryl ligands and complexes remains limited, meaning such complexes remain underexploited in catalysis. For bidentate boryl ligands, oxidative addition of boranes to low-valent Ir^I or Pt⁰ are the only examples yet reported. As part of our interest in developing improved group 10 ethylene polymerization catalysts, we present here an optimized synthesis of a novel, rigid borane/phosphine ligand and its Ni⁰ σ-borane complex. From the latter, an unprecedented oxidative dehydrochloroborylation, to give a Ni^II boryl complex, was achieved. Furthermore, this new B/P ligand allowed the nickel-catalyzed polymerization of ethylene, which suggests that Ni⁰ σ-hydroborane complexes act as masked Ni^II boryl hydride reagents.

Theoretical Design of a Catalyst with Both High Activity and Selectivity in C-H Borylation

Improving both the activity and selectivity of the C-H borylation reaction is currently a hot research topic but also a challenge. In this regard, we suggest a multistrategy combining directing group, coordination unsaturated metal center, and cationic character. Based on Reek's catalyst, we designed a new unsaturated cationic catalyst (1) featuring a directing group for C-H borylation. The calculated free energy barrier of C-H activation is only 7.2 kcal/mol, indicating that the cationic catalyst has higher activity than the original neutral catalyst in this process. Moreover, the comparison suggests that the ortho-C-H borylation pathway is more favorable than the meta and para pathways. The catalyst deconstructions are further performed and prove that the ortho-selectivity is attributed to hydrogen-bonding interactions between the directing group and the substrate, although the ortho site is sterically and electronically unfavorable.

α-Aminoboronates: recent advances in their preparation and synthetic applications

α-Aminoboronic acids and their derivatives are useful as bioactive agents. Thus far, three compounds containing an α-aminoboronate motif have been approved by the Food and Drug Administration (FDA) as protease inhibitors, and more are currently undergoing clinical trials. In addition, α-aminoboronic acids and their derivatives have found applications in organic synthesis, e.g. as α-aminomethylation reagents for the synthesis of chiral nitrogen-containing molecules, as nucleophiles for preparing valuable vicinal amino alcohols, and as bis-nucleophiles in the construction of valuable small molecule scaffolds. This review summarizes new methodology for the preparation of α-aminoboronates, including highlights of asymmetric synthetic methods and mechanistic explanations of reactivity. Applications of α-aminoboronates as versatile synthetic building blocks are also discussed.

Remarkably Efficient Iridium Catalysts for Directed C(sp2)-H and C(sp3)-H Borylation of Diverse Classes of Substrates

Here we describe the discovery of a new class of C-H borylation catalysts and their use for regioselective C-H borylation of aromatic, heteroaromatic, and aliphatic systems. The new catalysts have Ir-C(thienyl) or Ir-C(furyl) anionic ligands instead of the diamine-type neutral chelating ligands used in the standard C-H borylation conditions. It is reported that the employment of these newly discovered catalysts show excellent reactivity and ortho-selectivity for diverse classes of aromatic substrates with high isolated yields. Moreover, the catalysts proved to be efficient for a wide number of aliphatic substrates for selective C(sp³)-H bond borylations. Heterocyclic molecules are selectively borylated using the inherently elevated reactivity of the C-H bonds. A number of late-stage C-H functionalization have been described using the same catalysts. Furthermore, we show that one of the catalysts could be used even in open air for the C(sp²)-H and C(sp³)-H borylations enabling the method more general. Preliminary mechanistic studies suggest that the active catalytic intermediate is the Ir(bis)boryl complex, and the attached ligand acts as bidentate ligand. Collectively, this study underlines the discovery of new class of C-H borylation catalysts that should find wide application in the context of C-H functionalization chemistry.