Discovery of Multicomponent Heterogeneous Catalysts via Admixture Screening: PdBiTe Catalysts for Aerobic Oxidative Esterification of Primary Alcohols

Photocatalyzed Oxidative Tandem Reaction Mediated by Bipyridinium for Multifunctional Derivatization of Alcohols

The multifunctional derivatization of alcohols has been achieved by the bipyridinium-based conjugated small molecule photocatalysts with redox center and Lewis acid site. Besides exhibiting high activity in the selective generation of aldehydes/ketones, acids from alcohols through solvent modulation, this system renders the first selective synthesis of esters via an attractive cross-coupling pattern, whose reaction route is significantly different from the traditional condensation of alcohols and acids or esterification from hemiacetals. Following the oxidization of alcohol to aldehyde via bipyridinium-mediated electron and energy transfer, the Lewis acid site of bipyridinium then activates the aldehyde and methanol to obtain the acetal, which further reacts with methanol to generate ester. This method not only demonstrates a clear advantage of bipyridinium in diverse catalytic activities, but also paves the way for designing efficient multifunctional small molecule photocatalysts. This metal- and additive-free photocatalytic esterification reaction marks a significant advancement towards a more environmentally friendly, cost-effective and green sustainable approach, attributed to the utilization of renewable substrate alcohol and the abundant, low-cost air as the oxidant. The mildness of this esterification reaction condition provides a more suitable alternative for large-scale industrial production of esters.

Multiphasic Continuous-Flow Reactors for Handling Gaseous Reagents in Organic Synthesis: Enhancing Efficiency and Safety in Chemical Processes

The use of reactive gaseous reagents for the production of active pharmaceutical ingredients (APIs) remains a scientific challenge due to safety and efficiency limitations. The implementation of continuous-flow reactors has resulted in rapid development of gas-handling technology because of several advantages such as increased interfacial area, improved mass- and heat transfer, and seamless scale-up. This technology enables shorter and more atom-economic synthesis routes for the production of pharmaceutical compounds. Herein, we provide an overview of literature from 2016 onwards in the development of gas-handling continuous-flow technology as well as the use of gases in functionalization of APIs.

Plasmon-Induced Radical-Radical Heterocoupling Boosts Photodriven Oxidative Esterification of Benzyl Alcohol over Nitrogen-Doped Carbon-Encapsulated Cobalt Nanoparticles

Selective oxidation of alcohols under mild conditions remains a long-standing challenge in the bulk and fine chemical industry, which usually requires environmentally unfriendly oxidants and bases that are difficult to separate. Here, a plasmonic catalyst of nitrogen-doped carbon-encapsulated metallic Co nanoparticles (Co@NC) with an excellent catalytic activity towards selective oxidation of alcohols is demonstrated. With light as only energy input, the plasmonic Co@NC catalyst effectively operates via combining action of the localized surface-plasmon resonance (LSPR) and the photothermal effects to achieve a factor of 7.8 times improvement compared with the activity of thermocatalysis. A high turnover frequency (TOF) of 15.6 h-1 is obtained under base-free conditions, which surpasses all the reported catalytic performances of thermocatalytic analogues in the literature. Detailed characterization reveals that the d states of metallic Co gain the absorbed light energy, so the excitation of interband d-to-s transitions generates energetic electrons. LSPR-mediated charge injection to the Co@NC surface activates molecular oxygen and alcohol molecules adsorbed on its surface to generate the corresponding radical species (e.g., ⋅O2 - , CH3 O⋅ and R-⋅CH-OH). The formation of multi-type radical species creates a direct and forward pathway of oxidative esterification of benzyl alcohol to speed up the production of esters.

Cobalt nanoparticles-catalyzed aerobic oxygenation and esterification of alkynes via C≡C bonds cleavage

An unprecedented efficient protocol is developed for the oxidative cleavage of C≡C bonds in alkynes to produce structure-diverse esters using heterogeneous cobalt nanoparticles as catalyst with molecular oxygen as the oxidant. A diverse set of mono- and multisubstituted aromatic and aliphatic alkynes can be effectively cleaved and converted into the corresponding esters. Characterization analysis and control experiments indicate high surface area and pore volume, as well as nanostructured nitrogen-doped graphene-layer coated cobalt nanoparticles are possibly responsible for excellent catalytic activity. Mechanistic studies reveal that ketones derived from alkynes under oxidative conditions are formed as intermediates, which subsequently are converted to esters through a tandem sequential process. The catalyst can be recycled up to five times without significant loss of activity.

On the effect of metal loading on the reducibility and redox chemistry of ceria supported Pd catalysts

The effect of Pd loading on the redox characteristics of a ceria support was examined using in situ Pd K-edge XAS, Ce L₃-edge XAS and in situ X-ray diffraction techniques. Analysis of the data obtained from these techniques indicates that the onset temperature for the partial reduction of Ce(IV) to Ce(III), by exposure to H₂, varies inversely with the loading of Pd. Whilst the onset and completion temperatures of the reduction of Ce(IV) to Ce(III) are different, both samples yield the same maximal fraction of Ce(III) formation independent of Pd loading. Furthermore, the partial reduction of Ce is found to be concurrent with the reduction of PdO and demonstrated that the presence of metallic Pd is necessary for the reduction of the CeO₂ support. Upon passivation by room temperature oxidation, a full oxidation of the reduced ceria support was observed. However, only a mild surface oxidation of Pd was identified. The mild passivation of the Pd is found to lead to a highly reactive sample upon a second reduction by H₂. The onset of the reduction of Pd and Ce has been demonstrated to be independent of the Pd loading after a mild passivation with both samples exhibiting near room temperature reduction in the presence of H₂.

Acetylation of alcohols and amines under visible light irradiation: diacetyl as an acylation reagent and photosensitizer

An unprecedented strategy for the acetylation of alcohols and amines using diacetyl as both an acylation reagent and a photosensitizer was well developed.

Continuous flow technology-a tool for safer oxidation chemistry

The advantages and benefits of continuous flow technology for oxidation chemistry have been illustrated in tube reactors, micro-channel reactors, tube-in-tube reactors and micro-packed bed reactors in the presence of various oxidants.

Co-N-Si/AC Catalyst for Aerobic Oxidation of Benzyl Alcohols to Esters under Mild Conditions

A stable, earth-abundant, reusable cobalt-based heterogeneous catalyst is developed for the oxidative esterification of alcohols under ambient conditions, featuring broad substrate scope, providing good to excellent product yields. This protocol enables easy recyclability of the catalyst, measured up to five times without significant loss of efficiency. The active sites of Co-N-Si/AC are proposed to be Co-N species.

Recent Progress on Photocatalytic Synthesis of Ester Derivatives and Reaction Mechanisms

Esters and their derivatives are distributed widely in natural products, pharmaceuticals, fine chemicals and other fields. Esters are important building blocks in pharmaceuticals such as clopidogrel, methylphenidate, fenofibrate, travoprost, prasugrel, oseltamivir, eszopiclone and fluticasone. Therefore, esterification reaction becomes more and more popular in the photochemical field. In this review, we highlight three types of reactions to synthesize esters using photochemical strategies. The reaction mechanisms involve mainly single electron transfer, energy transfer or other radical procedures.

The dehydrogenative oxidation of aryl methanols using an oxygen bridged [Cu–O–Se] bimetallic catalyst

Herein, we report a new protocol for the dehydrogenative oxidation of aryl methanols using the cheap and commercially available catalyst CuSeO₃·2H₂O.

High-throughput experimentation meets artificial intelligence: a new pathway to catalyst discovery

High throughput experimentation in heterogeneous catalysis provides an efficient solution to the generation of large datasets under reproducible conditions. Knowledge extraction from these datasets has mostly been performed using statistical methods, targeting the optimization of catalyst formulations. The combination of advanced machine learning methodologies with high-throughput experimentation has enormous potential to accelerate the predictive discovery of novel catalyst formulations that do not exist with current statistical design of experiments. This perspective describes selective examples ranging from statistical design of experiments for catalyst synthesis to genetic algorithms applied to catalyst optimization, and finally random forest machine learning using experimental data for the discovery of novel catalysts. Lastly, this perspective also provides an outlook on advanced machine learning methodologies as applied to experimental data for materials discovery.

Additive-Mediated Selective Oxidation of Alcohols to Esters via Synergistic Effect Using Single Cation Cobalt Catalyst Stabilized with Inorganic Ligand

The direct catalytic oxidation of alcohols to esters is very appealing, but the economical-friendly catalysis systems are not yet well established. Herein, we show that a pure inorganic ligand-supported single-atomic cobalt compound, (NH₄)₃[CoMo₆O₁₈(OH)₆] (simplified as CoMo₆), could be used as a heterogeneous catalyst and effectively promote this type of reaction in the presence of 30% H₂O₂ using KCl as an additive. The oxidative cross-esterification of various alcohols (aromatic and aliphatic) could be achieved under mild conditions in nearly all cases, affording the corresponding esters in high yields, including several drug molecules and natural products. Detailed studies have revealed that chloride ion is able to bind to the CoMo₆ to form a supramolecular dimer 2(CoMo₆∙Cl), which can effectively catalyze the reaction via a synergistic effect from chloride ion and CoMo₆. Mechanism studies and control reactions demonstrate that the esterification proceeds via the key oxidative immediate of aldehydes.

Insight into the Effective Aerobic Oxidative Cross-Esterification of Alcohols over Au/Porous Boron Nitride Catalyst

Boron nitride (BN) has attracted great attention with an unexpected ability in aerobic catalysis. Still, its related probe reactions are relatively rare, and the effect of the BN-supported metal catalyst on O₂ activation is still ambiguous, and opinions are varied. In this work, the porous BN (pBN)-supported Au catalyst with a porous structure and exposed edges exhibits high activity in the oxidative cross-esterification reactions between the aromatic and C₁-C₃ aliphatic alcohols at ambient temperature. The turnover frequency value for methyl benzoate is 118 h^-1 at 30 °C, and the calculated apparent activation energy (Ea, 58 kJ/mol) is comparable to that of AuPd/TiO₂, Ru/Al₂O₃, and PdBiTe catalysts. Combined with temperature-programmed  desorption (TPD) results, the loading of Au enhances the desorption of O₂ and the interaction with alcohols; thus, a synergistic effect between the O-rich pBN and Au is considered. The free-radical scavenger can dramatically suppress the conversion (∼6%), suggesting that the reaction proceeds via the O₂* radicals. According to the vibration of ν_O-O, δ_OO-H, and ν_B-O-O-B detected by attenuated total reflectance-infrared spectroscopy (ATR-IR), we are prone to consider the oxygen activation route by the edge B atoms. Then, a possible L-H reaction mechanism was proposed: benzyl alcohol and O₂ adsorb on the Au/pBN initially, then O₂ is converted to O₂*, and the α-H elimination proceeds; as the semi-acetal formed, another α-H elimination proceeds and methyl benzoate is finally formed.

Renewable chitosan-derived cobalt@N-doped porous carbon for efficient aerobic esterification of alcohols under air

The direct oxidation of alcohols to esters through a green and cost-effective strategy is a fascinating chemical synthesis route. In this study, an environmentally friendly N-doped porous carbon encapsulated Co-based nano-catalyst was prepared via a simple carbonization procedure, utilizing renewable chitosan, accessible dicyandiamide and low-cost Co(OAc)2 as co-precursors. The obtained Co@NC-2-T catalysts were successfully used in selective oxidation of aromatic alcohols with methanol to esters under atmospheric reaction conditions. The Co@NC-2-900 catalyst (added with 2 g dicyandiamide and pyrolyzed at 900 °C) shows optimal activity and applicability and can also be reused at least six times in the oxidative esterification of aromatic alcohols with excellent stability. The presence of superoxide anion radicals in the current catalytic system was detected by the EPR method, and a possible mechanism of alcohol oxidation to ester was proposed on this basis. Thus, this study provides a facile, eco-friendly, and highly efficient catalytic system for oxidative esterification of alcohols.

Cyclopentadienyl Ruthenium(II) Complex-Mediated Oxidation of Benzylic and Allylic Alcohols to Corresponding Aldehydes

This work reports an efficient method for the oxidation reaction of aliphatic, aromatic allylic, and benzylic alcohols into aldehydes catalyzed by the cyclopentadienyl ruthenium(II) complex (RuCpCl(PPh3)2) with bubbled O2. Through further optimizing controlled studies, the tendency order of oxidation reactivity was determined as follows: benzylic alcohols > aromatic allylic alcohols >> aliphatic alcohols. In addition, this method has several advantages, including a small amount of catalyst (0.5 mol%) and selective application of high discrimination activity of aliphatic, aromatic allylic, and benzylic alcohols.

Nickel exchanged supported 12-tungstophosphoric acid: synthesis, characterization and base free one-pot oxidative esterification of aldehyde and alcohol

The present work describes for the first time, the synthesis and characterization of a bi-functional catalyst consisting of nickel and supported 12-tungstophosphoric acid as well as its application in one pot oxidative esterification of benzaldehyde and benzyl alcohol to benzoate ester. The said reactions were operated without any base at a low temperature and atmospheric pressure. The influence of reaction parameters such as nickel concentration, molar ratio of substrate to H₂O₂ as well as methanol, catalyst amount, reaction temperature and reaction time were investigated to optimize the conditions for maximum conversion with good selectivity towards the desired product. The superiority of the present work lies in obtaining higher conversion as well as higher selectivity of the desired product with a high TON for both the systems under sustainable reaction conditions. Moreover, the catalyst could be recovered and reused for up to three cycles without any significant loss in its selectivity. The obtained conversion as well as selectivity were discussed with a number of control experiments and based on the obtained results, mechanisms for both the reactions were proposed. Furthermore, the difference in activity towards oxidative esterification of benzaldehyde and benzyl alcohol was also correlated with the proposed mechanism.

The Use of Molecular Oxygen for Liquid Phase Aerobic Oxidations in Continuous Flow

Molecular oxygen (O₂) is the ultimate “green” oxidant for organic synthesis. There has been recent intensive research within the synthetic community to develop new selective liquid phase aerobic oxidation methodologies as a response to the necessity to reduce the environmental impact of chemical synthesis and manufacture. Green and sustainable chemical processes rely not only on effective chemistry but also on the implementation of reactor technologies that enhance reaction performance and overall safety. Continuous flow reactors have facilitated safer and more efficient utilization of O₂, whilst enabling protocols to be scalable. In this article, we discuss recent advancements in the utilization of continuous processing for aerobic oxidations. The translation of aerobic oxidation from batch protocols to continuous flow processes, including process intensification (high T/p), is examined. The use of “synthetic air”, typically consisting of less than 10% O₂ in N₂, is compared to pure O₂ (100% O₂) as an oxidant source in terms of process efficiency and safety. Examples of homogeneous catalysis and heterogeneous (packed bed) catalysis are provided. The application of flow photoreactors for the in situ formation of singlet oxygen (¹O₂) for use in organic reactions, as well as the implementation of membrane technologies, green solvents and recent reactor solutions for handling O₂ are covered.

Transformation of alcohols to esters promoted by hydrogen bonds using oxygen as the oxidant under metal-free conditions

One-pot oxidative transformation of alcohols into esters is very attractive, but metal-based catalysts are used in the reported routes. We discovered that the basic ionic liquid 1-ethyl-3-methylimidazolium acetate ([EMIM] OAc) could effectively catalyze this kind of reaction using O₂ as an oxidant without any other catalysts or additives. The oxidative self-esterification of benzylic alcohols or aliphatic alcohols and cross-esterification between benzyl alcohols and aliphatic alcohols could all be achieved with high yields. Detailed study revealed that the cation with acidic proton and basic acetate anion could simultaneously form multiple hydrogen bonds with the hydroxyl groups of the alcohols, which catalyzed the reaction very effectively. As far as we know, this is the first work to carry out this kind of reaction under metal-free conditions.

Development of N-Doped Carbon-Supported Cobalt/Copper Bimetallic Nanoparticle Catalysts for Aerobic Oxidative Esterifications Based on Polymer Incarceration Methods

Heterogeneous nitrogen-doped carbon-incarcerated cobalt/copper bimetallic nanoparticle (NP) catalysts, prepared from nitrogen-containing polymers, were developed, and an efficient catalytic process for aerobic oxidative esterification was achieved in the presence of a low loading (1 mol %) of catalyst that could be reused and easily reactivated. This protocol enabled diverse conditions for the bimetallic NP formation step to be screened, and significant rate acceleration by inclusion of a copper dopant was discovered. The catalytic activity of the bimetallic Co/Cu catalysts is much higher than that for cobalt catalysts reported to date and is even comparable with noble-metal NP catalysts.

Polysilane-Immobilized Rh-Pt Bimetallic Nanoparticles as Powerful Arene Hydrogenation Catalysts: Synthesis, Reactions under Batch and Flow Conditions and Reaction Mechanism

Hydrogenation of arenes is an important reaction not only for hydrogen storage and transport but also for the synthesis of functional molecules such as pharmaceuticals and biologically active compounds. Here, we describe the development of heterogeneous Rh-Pt bimetallic nanoparticle catalysts for the hydrogenation of arenes with inexpensive polysilane as support. The catalysts could be used in both batch and continuous-flow systems with high performance under mild conditions and showed wide substrate generality. In the continuous-flow system, the product could be obtained by simply passing the substrate and 1 atm H₂ through a column packed with the catalyst. Remarkably, much higher catalytic performance was observed in the flow system than in the batch system, and extremely strong durability under continuous-flow conditions was demonstrated (>50 days continuous run; turnover number >3.4 × 10⁵). Furthermore, details of the reaction mechanisms and the origin of different kinetics in batch and flow were studied, and the obtained knowledge was applied to develop completely selective arene hydrogenation of compounds containing two aromatic rings toward the synthesis of an active pharmaceutical ingredient.

Metal-Free Aerobic Oxidation of Nitro-Substituted Alkylarenes to Carboxylic Acids or Benzyl Alcohols Promoted by NaOH

Efficient and selective aerobic oxidation of nitro-substituted alkylarenes to functional compounds is a fundamental process that remains a challenge. Here, we report a metal-free, efficient, and practical approach for the direct and selective aerobic oxidation of nitro-substituted alkylarenes to carboxylic acids or benzyl alcohols. This sustainable system uses O₂ as clean oxidant in a cheap and green NaOH/EtOH mixture. The position and type of substituent critically affect the products. In addition, this sustainable protocol enabled gram-scale preparation of carboxylic acid and benzyl alcohol derivatives with high chemoselectivities. Finally, the reactions can be conducted in a pressure reactor, which can conserve oxygen and prevent solvent loss. The approach was conducive to environmental protection and potential industrial application.

Platinum-Based Heterogeneous Catalysts for Nitrile Synthesis via Aerobic Oxidative Coupling of Alcohols and Ammonia

Transition-metal-catalyzed aerobic oxidative coupling of alcohols and ammonia represents an attractive atom-economical synthetic route to prepare nitriles. Heterogeneous platinum catalysts have been widely used for aerobic alcohol oxidation to aldehydes and carboxylic acids but have not been applied to nitrile synthesis. In this work, we show that carbon-supported Pt catalysts are effective for this transformation. Unpromoted Pt is competent with benzylic substrates bearing either electron-donating or electron-withdrawing substituents. Use of both K₂CO₃ and Bi additives accelerates the rate of alcohol oxidation and affords high yields with challenging heterocyclic alcohols.

A thiocyanopalladation/carbocyclization transformation identified through enzymatic screening: stereocontrolled tandem C-SCN and C-C bond formation

Herein we describe a formal thiocyanopalladation/carbocyclization transformation and its parametrization and optimization using a new elevated temperature plate-based version of our visual colorimetric enzymatic screening method for reaction discovery. The carbocyclization step leads to C-SCN bond formation in tandem with C-C bond construction and is highly stereoselective, showing nearly absolute 1,2-anti-stereoinduction (5 examples) for substrates bearing allylic substitution, and nearly absolute 1,3-syn-stereoinduction (16 examples) for substrates bearing propargylic substitution. Based upon these high levels of stereoinduction, the dependence of the 1,2-stereoinduction upon cyclization substrate geometry, and the generally high preference for the transoid vinyl thiocyanate alkene geometry, a mechanistic model is proposed, involving (i) Pd(ii)-enyne coordination, (ii) thiocyanopalladation, (iii) migratory insertion and (iv) β-elimination. Examples of transition metal-mediated C-SCN bond formation that proceed smoothly on unactivated substrates and allow for preservation of the SCN moiety are lacking. Yet, the thiocyanate functionality is of great value for biophysical chemistry (vibrational Stark effect) and medicinal chemistry (S,N-heterocycle construction). The title transformation accommodates C-, O-, N- and S-bridged substrates (6 examples), thereby providing the corresponding carbocyclic or heterocyclic scaffolds. The reaction is also shown to be compatible with a significant range of substituents, varying in steric and electronic demand, including a wide range of substituted aromatics, fused bicyclic and heterocyclic systems, and even biaryl systems. Combination of this new transformation with asymmetric allylation and Grubbs ring-closing metathesis provides for a streamlined enantio- and diastereoselective entry into the oxabicyclo[3.2.1]octyl core of the natural products massarilactone and annuionone A, as also evidenced by low temperature X-ray crystal structure determination. Utilizing this bicyclic scaffold, we demonstrate the versatility of the thiocyanate moiety for structural diversification post-cyclization. Thus, the bridging vinyl thiocyanate moiety is smoothly elaborated into a range of derivative functionalities utilizing transformations that cleave the S-CN bond, add the elements of RS-CN across a π-system and exploit the SCN moiety as a cycloaddition partner (7 diverse examples). Among the new functionalities thereby generated are thiotetrazole and sulfonyl tetrazole heterocycles that serve as carboxylate and phosphate surrogates, respectively, highlighting the potential of this approach for future applications in medicinal chemistry or chemical biology.