Molecular Recognition Under Interfacial Conditions: Calix[4]pyrrole-Based Cross-linkable Micelles for Ion Pair Extraction

Pillar[5]arene-Based Ion-Pair Recognition for Encapsulation of a Stilbazolium-Type Dye with Enhanced Photophysical Properties and Nonlinear Optical Activity

Constructing organic composite materials through molecular recognition has emerged as an important theme in materials science. Here we report an ion-pair recognition system involving the use of a propoxylated pillar[5]arene (PrP5) to modulate the solid-state photophysical properties of dye trans-4'-(dimethylamino)-N-methyl-4-stilbazolium hexafluorophosphate (DMASP). Single crystal X-ray diffraction analysis reveals that the dye guest DMASP is encapsulated by PrP5 to form a 2 : 1 host-guest complex 2PrP5⸧DMASP in the crystalline state. The macrocyclic skeleton of PrP5 imposes restrictions on the intramolecular motions of the dye guest, leading to a significant enhancement of its fluorescence emission. Additionally, within the 2PrP5⸧DMASP complex crystal structure, DMASP molecules are found to display two possible opposite orientations in the one-dimensional channels formed by PrP5 molecules. This arrangement is believed to alter the overall solid-state packing structure of DMASP, thereby activating its nonlinear optical activity. This work not only reports a novel ion-pair molecular recognition system based on pillararenes but also provides valuable insights into the modulation of the crystalline state photophysical properties of organic dyes via cocrystal engineering.

Supramolecular chemistry of liquid-liquid extraction

Liquid-Liquid Extraction (LLE) is a venerable and widely used method for the separation of a targeted solute between two immiscible liquids. In recent years, this method has gained popularity in the supramolecular chemistry community due to the development of various types of synthetic receptors that effectively and selectively bind specific guests in an aqueous medium through different supramolecular interactions. This has eventually led to the development of state-of-the-art extraction technologies for the removal and purification of anions, cations, ion pairs, and small molecules from one liquid phase to another liquid phase, which is an industrially viable method. The focus of this perspective is to furnish a vivid picture of the current understanding of supramolecular interaction-based LLE chemistry. This will not only help to improve separation technology in the chemical, mining, nuclear waste treatment, and medicinal chemistry sectors but is also useful to address the purity issue of the extractable species, which is otherwise difficult. Thus, up-to-date knowledge on this subject will eventually provide opportunities to develop large-scale waste remediation processes and metallurgy applications that can address important real-life problems.

Phenylboronic Acid Functionalized Calix[4]pyrrole-Based Solid-State Supramolecular Electrolyte

Solid-state polymer electrolytes (SPEs) suffer from the low ionic conductivity and poor capability of suppressing lithium (Li) dendrites, which limits their utility in the preparation of all solid-state Li-metal batteries (LMBs). It is reported here a flexible solid supramolecular electrolyte that incorporates a new anion capture agent, namely a phenylboronic acid functionalized calix[4]pyrrole (C4P), into a poly(ethylene oxide) (PEO) matrix. The resulting solid-state supramolecular electrolyte demonstrates high ionic conductivity (1.9 × 10-3  S cm-1 at 60 °C) and a high Li+ transference number (t Li + ${t}_{{\mathrm{Li}}^{\mathrm{ + }}}$  = 0.70). Furthermore, the assembled Li|C4P-PEO-LiTFSI|LiFePO4 cell allows for stable cycling over 1200 cycles at 1 C at 60 °C, as well as good rate performance. The favorable performance of the C4P-PEO-LiTFSI SPE leads to suggest it can prove useful in the creation of high energy density solid-state LMBs.

A transformable nanoplatform with multiple therapeutic and immunostimulatory properties for treatment of advanced cancers

Cancer is a complex pathological phenomenon that needs to be treated from different aspects. Herein, we developed a size/charge dually transformable nanoplatform (PDR NP) with multiple therapeutic and immunostimulatory properties to effectively treat advanced cancers. The PDR NPs exhibit three different therapeutic modalities (chemotherapy, phototherapy and immunotherapy) that can be used to effectively treat primary and distant tumors, and reduce recurrent tumors; the immunotherapy is simultaneously activated by three major pathways, including toll-like receptor, stimulator of interferon genes and immunogenic cell death, effectively suppresses the tumor development in combination with an immune checkpoint inhibitor. In addition, PDR NPs show size and charge responsive transformability in the tumor microenvironment, which overcomes various biological barriers and efficiently delivers the payloads into tumor cells. Taking these unique characteristics together, PDR NPs effectively ablate primary tumors, activate strong anti-tumor immunity to suppress distant tumors and reduce tumor recurrence in bladder tumor-bearing mice. Our versatile nanoplatform shows great potential for multimodal treatments against metastatic cancers.

Recent Advancements in Ion-Pair Receptors

Over the past two decades, non-covalent chemistry has introduced various promising artificial receptors and revolutionized the host-guest chemistry. These versatile receptors have particularly been entertained in sensing and recognizing of diverse neutral molecules and/or ionic entities (e. g. anions, cations and ion-pair) of particular interest. Notably, supramolecular chemistry had given birth to a plethora of important molecules, explored in the chemical, biological, environmental, and pharmacological world to resolve the critical issues related to the human health while keeping environmental concerns in mind. Amongst the various types of supramolecular monotopic receptors (anions, cations, and neutral molecules), heteroditopic receptors (ion-pair receptors) consisting of distinct binding sites in one system for both cation and anion, have gained much interest from the scientific community in recent past because of their unique binding abilities. Interestingly, these promising artificial receptors have shown potential applications in sensing, recognition, transport and extraction processes besides their uses in salt/waste purification. Bearing the importance of these systems in mind, we intended to report the recent developments in ion-pair chemistry. Herein, we divided the whole document into three main sections; first one describes the introduction and history of the ion-pairs receptors. The second portion highlights the synthesis and applications of ion-pair receptors in sensing, recognition, molecular machines, photoswitching behaviour, extraction and transport properties, whereas the last part of this manuscript provides concluding remarks as well as future prospects of ion-pair receptors. We hope that this manuscript will be helpful to stimulating researchers around the globe to find out the hidden opportunities in this and related areas.

Aryl- and Superaryl-Extended Calix[4]pyrroles: From Syntheses to Potential Applications

The incorporation of aryl substituents at the meso-positions of calix[4]pyrrole (C4P) scaffolds produces aryl-extended (AE) and super-aryl-extended (SAE) calix[4]pyrroles. The cone conformation of the all-α isomers of "multi-wall" AE-C4Ps and SAE-C4Ps displays deep aromatic clefts or cavities. In particular, "four-wall" receptors feature an aromatic polar cavity closed at one end with four convergent pyrrole rings and fully open at the opposite end. This makes AE- and SAE-C4P scaffolds effective receptors for the molecular recognition of negatively charged ions and neutral guest molecules with donor-acceptor and hydrogen bonding motifs. In addition, adequately functionalized all-α isomers of multi wall AE- and SAE-C4P scaffolds self-assemble into uni-molecular and supra-molecular aggregates displaying capsular and cage-like structures. The self-assembly process requires the presence of template ions or molecules that lock the C4P cone conformation and complementing the inner polar functions and volumes of their cavities. We envisioned performing an in-depth revision of AE- and SAE-C4P scaffolds owing to their importance in different domains such as supramolecular chemistry, biology, material sciences and pharmaceutical chemistry. Herewith, besides the synthetic details on the elaboration of their structures, we also draw attention to their diverse applications. The organization of this review is mainly based on the number of "walls" present in the AE-C4P derivatives and their structural modifications. The sections are further divided based on the C4P functions and applications. The authors are convinced that this review will be of interest to researchers working in the general area of supramolecular chemistry as well as those involved in the study of the binding properties and applications of C4P derivatives.

Calix[4]pyrrole-Based Azo-Bridged Porous Organic Polymer for Bromine Capture

The toxicity, corrosiveness, and volatility of elemental bromine presents challenges for its safe storage and transportation. Purification from other halogens is also difficult. Here, we report an easy-to-prepare calix[4]pyrrole-based azo-bridged porous organic polymer (C4P-POP) that supports efficient bromine capture. C4P-POP was found to capture bromine as a vapor and from a cyclohexane source phase with maximum uptake capacities of 3.6 and 3.4 g·g^-1, respectively. Flow-through adsorption experiments revealed that C4P-POP removes 80% of the bromine from a 4.0 mM cyclohexane solution at a flow rate of 45 mL·h^-1. C4P-POP also allowed the selective capture of bromine from a 1:1 mixture of bromine and iodine in cyclohexane.

Fluorescent cyclophanes and their applications

With the serendipitous discovery of crown ethers by Pedersen more than half a century ago and the subsequent introduction of host-guest chemistry and supramolecular chemistry by Cram and Lehn, respectively, followed by the design and synthesis of wholly synthetic cyclophanes-in particular, fluorescent cyclophanes, having rich structural characteristics and functions-have been the focus of considerable research activity during the past few decades. Cyclophanes with remarkable emissive properties have been investigated continuously over the years and employed in numerous applications across the field of science and technology. In this Review, we feature the recent developments in the chemistry of fluorescent cyclophanes, along with their design and synthesis. Their host-guest chemistry and applications related to their structure and properties are highlighted.

Recognition competes with hydration in anion-triggered monolayer formation of cyanostar supra-amphiphiles at aqueous interfaces

The triggered self-assembly of surfactants into organized layers at aqueous interfaces is important for creating adaptive nanosystems and understanding selective ion extraction. While these transformations require molecular recognition, the underlying driving forces are modified by the local environment in ways that are not well understood. Herein, we investigate the role of ion binding and ion hydration using cyanosurf, which is composed of the cyanostar macrocycle, and its binding to anions that are either size-matched or mis-matched and either weakly or highly hydrated. We utilize the supra-amphiphile concept where anion binding converts cyanosurf into a charged and amphiphilic complex triggering its self-organization into monolayers at the air-water interface. Initially, cyanosurf forms aggregates at the surface of a pure water solution. When the weakly hydrated and size-matched hexafluorophosphate (PF6 -) and perchlorate (ClO4 -) anions are added, the macrocycles form distinct monolayer architectures. Surface-pressure isotherms reveal significant reorganization of the surface-active molecules upon anion binding while infrared reflection absorption spectroscopy show the ion-bound complexes are well ordered at the interface. Vibrational sum frequency generation spectroscopy shows the water molecules in the interfacial region are highly ordered in response to the charged monolayer of cyanosurf complexes. Consistent with the importance of recognition, we find the smaller mis-matched chloride does not trigger the transformation. However, the size-matched phosphate (H2PO4 -) also does not trigger monolayer formation indicating hydration inhibits its interfacial binding. These studies reveal how anion-selective recognition and hydration both control the binding and thus the switching of a responsive molecular interface.

A versatile enrichment of functionalized calixarene as a facile sensor for amino acids

Amino acids have become the most important part of the human biological system due to their roles in the living processes. Role of amino acids stretches beyond their traditional role as a building block for proteins, deficiency of the same could lead to decreased immunity, digestive problems, depression, fertility issues, lower mental alertness, slowed growth in children, and many other health issues. The acute detection of amino acids is necessary to determine the human health domain. Here in this review, we summarize and study the calixarenes as a complex detailed being of an immeasurable value and its utilization for the amino acids' detection. The key factors responsible such as noncovalent forces, LOD and supramolecular chemistry of calixarenes with amino acids are described well. This study presents the most recent efforts made for the development of potential and highly efficient calixarene based sensors for the detection of amino acids.

Conformationally tunable calix[4]pyrrole-based nanofilms for efficient molecular separation

Preparation of nanofilms which are able to reject water-soluble low molecular weight organic compounds in nanofiltration remains to be a challenge. Herein, we report a new kind of self-standing, defect-free, robust, centimeter-sized and thickness controllable calix[4]pyrrole (C[4]P)-based nanofilms with excellent molecular sieving performance in nanofiltration. The nanofilms were prepared via confined dynamic condensation of the tetra-benzoyl-hydrazine derivative of calix[4]pyrrole (CPTBH) with 1,3,5-benzenetricarboxaldehyde (BTC) at the air/dimethyl sulfoxide (DMSO) interface. Nanofiltration tests under 2 bar pressure with porous polyethylene terephthalate (PET) as the support and a CsF treated CPTBH-BTC nanofilm (∼100 nm) as the selective layer depicted a water permeance of 15 L m^-2h^-1 bar^-1 and a methanol permeance of 45 L m^-2h^-1 bar^-1. High rejection rates (>95%) were found in aqueous solution for most of the tested dyes and pharmaceuticals. Remarkably, the composite membrane also demonstrated good separation performance in aqueous phase to some amino acids and organic dyes with molecular weights around 200 g/mol. High-performance nanofiltration in methanol was also realized. In this case, the molecular weight cutoff value is ∼ 800 g/mol. These findings showed that introduction of macrocyclic hosts is an effective way to develop nanofilms with high solvent permeance but low molecular weight cutoff value.

Nonporous Adaptive Calix[4]pyrrole Crystals for Polar Compound Separations

The use of molecular crystalline materials for the separation and purification of chemical raw materials, particularly polar compounds with similar physical and chemical properties, represents an ongoing challenge. This is particularly true for volatile feedstocks that form binary azeotropes. Here we report a new cavity-extended version of calix[4]pyrrole (C4P) that readily forms nonporous adaptive crystals (NACs). These C4P-based NACs allow pyridine to be separated from toluene/pyridine mixtures with nearly 100% purity, as well as the removal of 1,4-dioxane from 1,4-dioxane/water mixtures with high adsorption capacity. Removal of the polar guest (pyridine or 1,4-dioxane) from the guest-loaded NACs by heating under vacuum produces the guest-free crystalline form. In the case of both guests, the C4P material could be reused as demonstrated through 10 uptake and release cycles without apparent performance loss.

Halogen Bonding Heteroditopic Materials for Cooperative Sodium Iodide Binding and Extraction

A series of novel heteroditopic halogen bonding (XB) receptor functionalised silica based materials, containing mono- and bis-iodotriazole benzo-15-crown-5 groups are investigated for the cooperative binding and extraction of sodium halide ion-pair species from aqueous solution. Characterisation of the XB materials by CHN elemental analysis, 13 C CP/MAS NMR and ATR-FTIR spectroscopies confirms and quantifies the successful incorporation of the ion-pair receptor frameworks to the silica material. ICP-MS solid-liquid extraction studies demonstrate the bidentate XB functionalised material is capable of NaI extraction from water. Importantly, cooperative XB-mediated sodium halide ion-pair binding is determined to be crucial to the material's extraction capabilities, impressively demonstrating a two-fold enhancement in sodium iodide extraction efficiency relative to a heteroditopic hydrogen bonding receptor functionalised silica material analogue.

Difunctional covalent organic framework hybrid material for synergistic adsorption and selective removal of fluoroquinolone antibiotics

Due to the low efficiency of traditional sewage treatment methods, the effective removal of zwitterionic fluoroquinolone (FQs) antibiotics is of vital significant for environment protection. In this work, a SO₃H-anchored covalent organic framework (TpPa-SO₃H) was deliberately designed by linking phenolic trialdehyde with triamine through Schiff reaction, then low-content Tb³⁺ ions were loaded onto covalent organic framework according to wet-chemistry immersion dispersion method which benefitting for efficient FQs antibiotics uptaking. Tb@TpPa-SO₃H functionalized with regularly distributed sulfonic acid groups and terbium ions which could provide difunctional binding sites. Tb³⁺ sites could capture carboxylic acid group of FQs molecules according to the complexes coordination effect and sulfonic acid sites play a significant role in the adsorption of FQs molecules through electrostatic interaction with amine group. Tb@TpPa-SO₃H with dual complementary function sites exhibited ultra-fast adsorption kinetics (< 2 min, average over 99% removing rate) and high adsorption capacities of 989, 956, and 998 mg g^-1 for Norfloxacin (NOR), ciprofloxacin (CIP), enrofloxacin (ENR), respectively. Furthermore, Tb@TpPa-SO₃H showed excellent selectivity for the adsorption of FQs in tanglesome system. This work not only explored synergistic adsorption in ion-functionalized 2D covalent organic framework with dual binding sites, but also delineated a promising strategy for the elimination of organic pollutants in environmental remediation.

Switching Ion Binding Selectivity of Thiacalix[4]arene Monocrowns at Liquid-Liquid and 2D-Confined Interfaces

Understanding the interaction of ions with organic receptors in confined space is of fundamental importance and could advance nanoelectronics and sensor design. In this work, metal ion complexation of conformationally varied thiacalix[4]monocrowns bearing lower-rim hydroxy (type I), dodecyloxy (type II), or methoxy (type III) fragments was evaluated. At the liquid–liquid interface, alkylated thiacalixcrowns-5(6) selectively extract alkali metal ions according to the induced-fit concept, whereas crown-4 receptors were ineffective due to distortion of the crown-ether cavity, as predicted by quantum-chemical calculations. In type-I ligands, alkali-metal ion extraction by the solvent-accessible crown-ether cavity was prevented, which resulted in competitive Ag⁺ extraction by sulfide bridges. Surprisingly, amphiphilic type-I/II conjugates moderately extracted other metal ions, which was attributed to calixarene aggregation in salt aqueous phase and supported by dynamic light scattering measurements. Cation–monolayer interactions at the air–water interface were monitored by surface pressure/potential measurements and UV/visible reflection–absorption spectroscopy. Topology-varied selectivity was evidenced, towards Sr²⁺ (crown-4), K⁺ (crown-5), and Ag⁺ (crown-6) in type-I receptors and Na⁺ (crown-4), Ca²⁺ (crown-5), and Cs⁺ (crown-6) in type-II receptors. Nuclear magnetic resonance and electronic absorption spectroscopy revealed exocyclic coordination in type-I ligands and cation–π interactions in type-II ligands.

Solvent-Controlled Self-Assembled Oligopyrrolic Receptor

We report a fully organic pyridine-tetrapyrrolic U-shaped acyclic receptor 10, which prefers a supramolecular pseudo-macrocyclic dimeric structure (10)₂ in a less polar, non-coordinating solvent (e.g., CHCl₃). Conversely, when it is crystalized from a polar, coordinating solvent (e.g., N,N-dimethylformamide, DMF), it exhibited an infinite supramolecular one-dimensional (1D) “zig-zag” polymeric chain, as inferred from the single-crystal X-ray structures. This supramolecular system acts as a potential receptor for strong acids, e.g., p-toluenesulfonic acid (PTSA), methane sulfonic acid (MSA), H₂SO₄, HNO₃, and HCl, with a prominent colorimetric response from pale yellow to deep red. The receptor can easily be recovered from the organic solution of the host–guest complex by simple aqueous washing. It was observed that relatively stronger acids with pK_a < −1.92 in water were able to interact with the receptor, as inferred from ¹H NMR titration in tetrahydrofuran-d₈ (THF-d₈) and ultraviolet–visible (UV–vis) spectroscopic titrations in anhydrous THF at 298 K. Therefore, this new dynamic supramolecular receptor system may have potentiality in materials science research.

Robust and Large-Area Calix[4]pyrrole-Based Nanofilms Enabled by Air/DMSO Interfacial Self-Assembly-Confined Synthesis

The modular construction of defect-free nanofilms with a large area remains a challenge. Herein, we present a scalable strategy for the preparation of calix[4]pyrrole (C[4]P)-based nanofilms through acryl hydrazone reaction conducted in a tetrahydrazide calix[4]pyrrole (CPTH)-based self-assembled layer at the air/DMSO interface. With this strategy, robust, regenerable, and defect-free nanofilms with an exceptionally large area (∼750 cm²) were constructed. The thickness and permeability of the film systems can be fine-tuned by varying the precursor concentration or by changing another building block. A typical nanofilm (C[4]P-TFB, ∼67 nm) depicted high water flux (39.9 L m^-2 h^-1 under 1 M Na₂SO₄), narrow molecular weight cut-off value (∼200 Da), and promising antifouling properties in the forward osmosis (FO) process. In addition, the nanofilms are stable over a wide pH range and tolerable to different organic solvents. Interestingly, the introduction of C[4]P endowed the nanofilms with both outstanding mechanical properties and unique group-selective separation capability, laying the foundation for wastewater treatment and pharmaceutical concentration.

Cross-linked small-molecule capsules with excitation wavelength-dependent photoluminescence and high loading capacity: design, synthesis and application in imaging-guided drug delivery

The cross-linked small-molecule micelles (cSMs) have found applications in many fields but their low loading capacity and non-fluorescence property hindered their further development. Herein, water-soluble organic nanoparticles were applied as templates to "stretch" the hydrophobic core of cSMs and photo-cross-linking was employed to supply photoluminescence. The resulting cross-linked small-molecule capsules (cSCs) not only reserve the superior properties of cSMs of accurate monomer, easy functionalization and robust stability, but also achieve high drug loading capacity and excitation wavelength-dependent fluorescence, where the drug loading contents (DLCs) for various hydrophobic drugs were more than 30-fold higher than that of cSMs, and the maximum quantum yield could be as high as 12.0%. Featuring these superiorities, the cSCs hold promising potential in many fields and an example of doxorubicin-loaded cSCs (DOX@cSCs) for multichannel imaging-guided drug delivery is shown in this work.

Application of Doehlert experimental design for the removal of radium from aqueous solution by cross-linked phenoxycalix[4]pyrrole-polymer using Ba(II) as a model

Ra-226 is a naturally occurring radionuclide that is derived from uranium-238 series, and it is present at low concentrations in rocks, soil, and groundwater. Many efforts have been exerted for the decontamination of radium from aqueous media in order to meet the increasing water demand of the population. To this aim, a new polymer based on cross-linked phenoxycalix[4]pyrrole was designed and employed in solid/liquid extractions in order to remove radium from aqueous solutions. Preliminary experiments have highlighted the capability of this polymer to extract 22% of Ra-226 from aqueous acidic solution. The optimization of the extraction experimental factors in the direction to attend the maximum removal of Ra-226 from water was carried out employing Ba²⁺ due to its similar chemical behavior as radium, in order to minimize the consumption of Ra-226 solutions and the risk of radioactive contamination. Doehlert experimental plan was then applied to determine the optimal conditions (pH, time, temperature) for the removal of Ba²⁺ from aqueous solutions.

Soft Materials Constructed Using Calix[4]pyrrole- and "Texas-Sized" Box-Based Anion Receptors

Soft materials have received considerable attention from supramolecular chemists and material scientists alike. This interest reflects the advantages provided by their soft, flexible nature and the convenience of the molecular self-assembly that underlies their preparation. Common soft supramolecular materials include polymeric gels, supramolecular polymers, nanoaggregates, and membranes. Polymeric gels are solidlike networks of cross-linked polymer chains. Supramolecular polymers contain repeat units connected through reversible non-covalent bonds. Nanoaggregates are formed as a result of hydrophobic interactions involving amphiphilic building blocks. Because of the presence of non-covalent interactions, supramolecular soft materials typically display stimuli-responsive or adaptive features. Various macrocyclic hosts, such as cyclodextrins, crown ethers, calixarenes, cucurbiturils, and pillararenes, and many classic non-covalent interactions have been harnessed to construct supramolecular soft materials. Only recently has anion binding been used as the underlying recognition motif. Anions are ubiquitous in the natural world. Their importance has inspired efforts to achieve good anion binding and to exploit anion recognition in a number of fields, including extraction, transport, sensing, and catalysis. Most of this effort has involved the use of stand-alone anion receptors. On the other hand, soft materials with anion recognition features could lead to new macromolecular systems of interest in the context of many application areas. In this Account, we summarize the latest efforts from our laboratory to prepare supramolecular soft materials, including polymeric gels, supramolecular polymers, and nanoaggregates, with bona fide anion recognition features. Two anion receptor systems, namely, calix[4]pyrroles (C4Ps) and a tetraimidazolium macrocycle known as the "Texas-sized" molecular box (TxSB), have been used for this purpose. To date, TxSB-based hydrogels have been utilized to capture anions from water and for coded information applications; C4P-based organic polymeric gels have been used to extract dianions from aqueous source phases and for the on-site detection of chloride anions. Polymers containing C4P and TxSB anion recognition subunits typically display responsive features and can be modified through application of appropriately chosen external stimuli. For instance, nanoaggregates may be formed as a result of the hydrophobic interactions of C4P- and TxSB-based amphiphiles. The resulting aggregates were found to mimic the structural evolution of organelles and could be used as effective anion and ion pair extractants. This Account summarizes progress to date while underscoring potential opportunities associated with combining anion recognition and soft materials chemistry. The hope is to stimulate further advances in broad areas, including polymer science, supramolecular chemistry, biology, materials research, and information storage.

Assembly behaviors of calixarene-based amphiphile and supra-amphiphile and the applications in drug delivery and protein recognition

Calixarene is the third generation of supra-molecular compounds after crown ether and cyclodextrin. Amphiphilic calixarene can be obtained by modulation with both hydrophilic group and hydrophobic alkyl chain. Compared with conventional surfactant, amphiphilic calixarene has much lower critical micelle concentration and is much easier to self-assemble into different morphological aggregates. Calixarene-basedsupra-amphiphile can be designed via noncovalent bonds due to the capability of calixarene to recognize surfactant; the binding of a surfactant with calixarene can decrease the critical micelle concentration of surfactant by several times. The calixarene-surfactant complex can self-aggregate to form spherical micelles, vesicles, and spherical nanoparticles, and the aggregation behavior can be controlled by the structures and the molar ratio of surfactant to calixarene and environmental factors. Calixarene-based amphiphile and supra-amphiphile show low cytotoxicity. They can load drugs and assemble into nanocapsules with drugs. The structure of the calixarene-drug complex can respond to external stimuli, rendering the sustained release of the drug and suggesting its potential application as a drug delivery system. Recently, calixarene has also been found to selectively bind proteins, suggesting its prospect in disease diagnosis and intervention treatment in clinics. This review elaborates on the research progress in the self-assembly behaviors of calixarene-based amphiphile and supra-amphiphile and the applications of the calixarenes in drug delivery and protein recognition. The prospectives for the studies are also provided in this review.

Macrocycles as Ion Pair Receptors

Cation and anion recognition have both played central roles in the development of supramolecular chemistry. Much of the associated research has focused on the development of receptors for individual cations or anions, as well as their applications in different areas. Rarely is complexation of the counterions considered. In contrast, ion pair recognition chemistry, emerging from cation and anion coordination chemistry, is a specific research field where co-complexation of both anions and cations, so-called ion pairs, is the center of focus. Systems used for the purpose, known as ion pair receptors, are typically di- or polytopic hosts that contain recognition sites for both cations and anions and which permit the concurrent binding of multiple ions. The field of ion pair recognition has blossomed during the past decades. Several smaller reviews on the topic were published roughly 5 years ago. They provided a summary of synthetic progress and detailed the various limiting ion recognition modes displayed by both acyclic and macrocyclic ion pair receptors known at the time. The present review is designed to provide a comprehensive and up-to-date overview of the chemistry of macrocycle-based ion pair receptors. We specifically focus on the relationship between structure and ion pair recognition, as well as applications of ion pair receptors in sensor development, cation and anion extraction, ion transport, and logic gate construction.

Solid–liquid extraction of iodide and bromide from aqueous media by a new water-insoluble phenoxycalix[4]pyrrole-epichlorohydrin polymer

A phenoxycalix[4]pyrrole-epichlorohydrin based extractant was easily synthesized for the first time and used for iodide and bromide extraction from aqueous media.

A click mediated route to a novel fluorescent pyridino-extended calix[4]pyrrole sensor: synthesis and binding studies

This new cali[4]pyrrole entity displays molecular fluorescence recognition capabilities towards iron and mercury which are major environmental contaminants.

Trojan Horse nanotheranostics with dual transformability and multifunctionality for highly effective cancer treatment

Nanotheranostics with integrated diagnostic and therapeutic functions show exciting potentials towards precision nanomedicine. However, targeted delivery of nanotheranostics is hindered by several biological barriers. Here, we report the development of a dual size/charge- transformable, Trojan-Horse nanoparticle (pPhD NP) for delivery of ultra-small, full active pharmaceutical ingredients (API) nanotheranostics with integrated dual-modal imaging and trimodal therapeutic functions. pPhD NPs exhibit ideal size and charge for drug transportation. In tumour microenvironment, pPhD NPs responsively transform to full API nanotheranostics with ultra-small size and higher surface charge, which dramatically facilitate the tumour penetration and cell internalisation. pPhD NPs enable visualisation of biodistribution by near-infrared fluorescence imaging, tumour accumulation and therapeutic effect by magnetic resonance imaging. Moreover, the synergistic photothermal-, photodynamic- and chemo-therapies achieve a 100% complete cure rate on both subcutaneous and orthotopic oral cancer models. This nanoplatform with powerful delivery efficiency and versatile theranostic functions shows enormous potentials to improve cancer treatment.

Size and charge can significantly affect delivery of therapeutic agents to tumours. Here, the authors report on nanoparticles optimised for delivery to the tumour which release smaller particles and change charge in the tumour microenvironment to optimise tumour penetration and cellular uptake.

FRET-based Solid-state Luminescent Glyphosate Sensor Using Calixarene-grafted Ruthenium(II)bipyridine Doped Silica Nanoparticles

Calixarene-functionalized luminescent nanoparticles were successfully fabricated for the FRET-based selective and sensitive detection of the organophosphorus pesticide glyphosate (GP). p-Tert-butylcalix[4]arene was grafted on the surface of [Ru(bpy)₃ ]²⁺ incorporated SiNps to produce self-assembled nanosensors (RSC). FRET was switched on in the presence of GP by means of energy transfer due to binding with p-tert-butylcalix[4]arene grafted on the surface of the RSC. The FRET efficiency of the GP-RSC system was increased gradually with the addition of GP. The FRET efficiency was evaluated as 87.69 % and a high binding affinity was established by the binding constant value, 1.16×10⁷  M^-1 , using a Langmuir binding isotherm plot. The estimated limit of detection (LOD) was 7.91×10^-7  M, which was lower than the Environmental Protection Agency (EPA) recommendation. The probe also effectively responds to real sample analysis. The sensitivity and selectivity was realized due to the efficient FRET towards the fluorescence properties of the [Ru(bpy)₃ ]²⁺ complex.

Direct Detection of the Ion Pair to Free Ions Transformation upon Complexation with an Ion Receptor in Non-Polar Solvents by using Conductometry

In this study, we performed conductometry in various organic solvents to directly detect the transformation from tetrabutylammonium chloride (TBACl) ion‐pair salt to the free ions through complexation with meso‐octamethylcalix[4]pyrrole (CP), which is a well‐known receptor for chloride anions. In the presence of CP, the conductivity of TBACl increases in various non‐polar solvents, indicating that complexation with CP enhances the ionic dissociation of TBACl in such non‐polar solvents. In other words, CP recognizes chloride as an ion‐paired salt as well as a free anion in non‐polar solvents. Additionally, the TBA(CP–Cl) complex exhibited a considerably lower ion‐pairing constant (K_ip) than TBACl in non‐polar solvents, resulting in enhanced conductivity. Based on these findings, we can conclude that complexation of an anion with a hydrophobic anion receptor will be useful for creating functional and stimuli‐responsive soft materials in organic solvents using coulombic forces.

Selective Anion Extraction and Recovery Using a FeII4 L4 Cage

Selective anion extraction is useful for the recovery and purification of valuable chemicals, and in the removal of pollutants from the environment. Here we report that Fe^II₄L₄ cage 1 is able to extract an equimolar amount of ReO₄⁻, a high‐value anion and a nonradioactive surrogate of TcO₄⁻, from water into nitromethane. Importantly, the extraction was efficiently performed even in the presence of 10 other common anions in water, highlighting the high selectivity of 1 for ReO₄⁻. The extracted guest could be released into water as the cage disassembled in ethyl acetate, and then 1 could be recycled by switching the solvent to acetonitrile. The versatile solubility of the cage also enabled complete extraction of ReO₄⁻ (as the tetrabutylammonium salt) from an organic phase into water by using the sulfate salt of 1 as the extractant.

One-pot synthesis of 2-naphthols from nitrones and MBH adducts via decarboxylative N–O bond cleavage

The unprecedented one-pot synthesis of 2-naphthols through an acid-mediated decarboxylative N–O bond cleavage of bridged benzoxazepine intermediates is described.

Anion-dependent thermo-responsive supramolecular superstructures of Cu(ii) macrocycles

A heteroditopic ligand predominantly self-assembled into a dinuclear Cu(ii) macrocycle with various Cu²⁺ salts. However, each macrocycle is further hierarchically assembled to distinct supramolecular superstructures, where the shape of the morphology is found to be highly dependent on the counter-anions and temperature.