The Chemistry of CO2 Capture in an Amine-Functionalized Metal–Organic Framework under Dry and Humid Conditions

Translocation and Confinement of Tetraamines in Adaptable Microporous Cavities

Metal-Organic Frameworks can be grafted with amines by coordination to metal vacancies to create amine-appended solid adsorbents, which are being considered as an alternative to using aqueous amine solutions for CO2 capture. In this study, we propose an alternative mechanism that does not rely on the use of neutral metal vacancies as binding sites but is enabled by the structural adaptability of heterobimetallic Ti2Ca2 clusters. The combination of hard (Ti4+) and soft (Ca2+) metal centers in the inorganic nodes of the framework enables MUV-10 to adapt its pore windows to the presence of triethylenetetramine molecules. This dynamic cluster response facilitates the translocation and binding of tetraamine inside the microporous cavities to enable the formation of bis-coordinate adducts that are stable in water. The extension of this grafting concept from MUV-10 to larger cavities not restrictive to CO2 diffusion will complement other strategies available for the design of molecular sorbents for decarbonization applications.

A mechanochemical process to capture and separate carbon dioxide from natural gas using boron nitride nanosheets

Addressing climate change is a critical and pressing matter that requires immediate attention to mitigate its severe repercussions. In order to enhance the capture and separation of carbon dioxide from natural gas and nitrogen gas, it is imperative to develop new capture materials and more efficient storage processes. In this study, we introduce an innovative environmentally friendly storage and separation technique. Through a controlled mechanochemical process, a substantial amount of carbon dioxide (103.6 wt%) was successfully captured within boron nitride. This process also excels at effectively isolating carbon dioxide from a gas mixture containing natural gas (CH4) or nitrogen due to its superior adsorption selectivity for CO2 over the other two gases. The stored carbon dioxide can be released upon heating, and this procedure can be repeated several times (minimum four times), indicating a game changing process in CO2 gas capture and separation technology with the advantages of green, low cost and efficiency.

Construction of Benzoxazine-linked One-Dimensional Covalent Organic Frameworks Using the Mannich Reaction

Covalent polymerization of organic molecules into crystalline one-dimensional (1D) polymers is effective for achieving desired thermal, optical, and electrical properties, yet it remains a persistent synthetic challenge for their inherent tendency to adopt amorphous or semicrystalline phases. Here we report a strategy to synthesize crystalline 1D covalent organic frameworks (COFs) composing quasi-conjugated chains with benzoxazine linkages via the one-pot Mannich reaction. Through [4+2] and [2+2] type Mannich condensation reactions, we fabricated stoichiometric and sub-stoichiometric 1D covalent polymeric chains, respectively, using doubly and singly linked benzoxazine rings. The validity of their crystal structures has been directly visualized through state-of-the-art cryogenic low-dose electron microscopy techniques. Post-synthetic functionalizations of them with a chiral MacMillan catalyst produce crystalline organic photocatalysts that demonstrated excellent catalytic and recyclable performance in light-driven asymmetric alkylation of aldehydes, affording up to 94 % enantiomeric excess.

Facile Synthesis of Self-Supported Solid Amine Sorbents for Direct Air Capture

Conventional usage of tetraethylenepentamine (TEPA) via being supported on porous solid materials for carbon capture is susceptible to oxidative degradation during regeneration cycles. This study reports a novel method to synthesize a TEPA based solid polymer for efficient CO2 removal via direct air capture (DAC). The polymer was obtained through epoxy-amine crosslinking reaction, leading to the transformation of liquid TEPA to a self-supported solid polymer. The synthesis was conducted under ambient conditions via a one-pot process with no waste products, which is aligned with green synthesis. The performance of the solid amine was evaluated in DAC under realistic conditions and compared with TEPA supported on SiO2 and zeolite 13X prepared through the conventional method. The solid TEPA amine exhibited a high CO2 uptake of 6.2 wt.% comparable to the conventional counterparts. More importantly, the solid TEPA amine demonstrated high resistance to oxidation during the accelerated ageing process at 80 °C in air for 24 h, whereas the two supported TEPA samples experienced severe degradation, with zeolite 13X supported TEPA incurring a reduction of 86.5 % in CO2 capturing capacity after the ageing. This work sheds light on the novel usage of TEPA as an efficient solid amine for practical DAC operation.

Halogen-Decorated Metal-Organic Frameworks for Efficient and Selective CO2 Capture, Separation, and Chemical Fixation with Epoxides under Mild Conditions

In the present work, three novel halogen-appended cadmium(II) metal-organic frameworks [Cd2(L1)2(4,4'-Bipy)2]n·4n(DMF) (1), [Cd2(L2)2(4,4'-Bipy)2]n·3n(DMF) (2), and [Cd(L3)(4,4'-Bipy)]n·2n(DMF) (3) [where L1 = 5-{(4-bromobenzyl)amino}isophthalate; L2 = 5-{(4-chlorobenzyl)amino}isophthalate; L3 = 5-{(4-fluorobenzyl)amino}isophthalate; 4,4'-Bipy = 4,4'-bipyridine; and DMF = N,N'-dimethylformamide] have been synthesized under solvothermal conditions and characterized by various analytical techniques. The single-crystal X-ray diffraction analysis demonstrated that all the MOFs feature a similar type of three-dimensional structure having a binuclear [Cd2(COO)4(N)4] secondary building block unit. Moreover, MOFs 1 and 2 contain one-dimensional channels along the b-axis, whereas MOF 3 possesses a 1D channel along the a-axis. In these MOFs, the pores are decorated with multifunctional groups, i.e., halogen and amine. The gas adsorption analysis of these MOFs demonstrate that they display high uptake of CO2 (up to 5.34 mmol/g) over N2 and CH4. The isosteric heat of adsorption (Qst) value for CO2 at zero loadings is in the range of 18-26 kJ mol-1. In order to understand the mechanism behind the better adsorption of CO2 by our MOFs, we have also performed configurational bias Monte Carlo simulation studies, which confirm that the interaction between our MOFs and CO2 is stronger compared to those with N2 and CH4. Various noncovalent interactions, e.g., halogen (X)···O, Cd···O, and O···O, between CO2 and the halogen atom, the Cd(II) metal center, and the carboxylate group from the MOFs are observed, respectively, which may be a reason for the higher carbon dioxide adsorption. Ideal adsorbed solution theory (IAST) calculations of MOF 1 demonstrate that the obtained selectivity values for CO2/CH4 (50:50) and CO2/N2 (15:85) are ca. 28 and 193 at 273 K, respectively. However, upon increasing the temperature to 298 K, the selectivity value (S = 34) decreases significantly for the CO2/N2 mixture. We have also calculated the breakthrough analysis curves for all the MOFs using mixtures of CO2/CH4 (50:50) and CO2/N2 (50:50 and 15:85) at different entering gas velocities and observed larger retention times for CO2 in comparison with other gases, which also signifies the stronger interaction between our MOFs and CO2. Moreover, due to the presence of Lewis acidic metal centers, these MOFs act as heterogeneous catalysts for the CO2 fixation reactions with different epoxides in the presence of tetrabutyl ammonium bromide (TBAB), for conversion into industrially valuable cyclic carbonates. These MOFs exhibit a high conversion (96-99%) of epichlorohydrin (ECH) to the corresponding cyclic carbonate 4-(chloromethyl)-1,3-dioxolan-2-one after 12 h of reaction time at 1 bar of CO2 pressure, at 65 °C. The MOFs can be reused up to four cycles without compromising their structural integrity as well as without losing their activity significantly.

Unravelling the structure of CO2 in silica adsorbents: an NMR and computational perspective

This comprehensive review describes recent advancements in the use of solid-state NMR-assisted methods and computational modeling strategies to unravel gas adsorption mechanisms and CO2 speciation in porous CO2-adsorbent silica materials at the atomic scale. This work provides new perspectives for the innovative modifications of these materials rendering them more amenable to the use of advanced NMR methods.

Two-Dimensional Nanoporous Cross-linked Polymer Networks as Emerging Candidates for Gas Adsorption

This paper illustrates the gas adsorption properties of newly synthesized nanoporous cross-linked polymer networks (CPNs). All synthesized CPNs possess N-rich functional groups and are used for the utilization of carbon dioxide and methane. Good gas adsorption and selectivities are obtained for all of the samples. Among the materials, HEREON2 outperforms better selectivity for methane separation from nitrogen rather than zeolites, activated carbons, molecular sieves, covalent organic frameworks, and metal-organic frameworks (MOFs). The accessibility of the N-rich functionalities makes these materials potential candidates for the separation of hydrocarbons via increased polarizabilities. High-pressure adsorption experiments showed that the synthesized two-dimensional nanoporous materials also have a high affinity toward carbon dioxide. HEREON2 powders showed an increased experimental CO2/N2 selectivity of ∼25,000 at 50 bar due to the presence of nitrogen groups in the structure. Fourier-transform infrared spectroscopy (FTIR), solid-state NMR, X-ray diffraction, thermogravimetric analysis, energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) were applied for the characterization of the synthesized nanoporous CPNs. The results show a potential new pathway for future CPN membrane development.

Adsorption and Diffusion Properties of Functionalized MOFs for CO2 Capture: A Combination of Molecular Dynamics Simulation and Density Functional Theory Calculation

The capture of carbon dioxide (CO2) from fuel gases is a significant method to solve the global warming problem. Metal-organic frameworks (MOFs) are considered to be promising porous materials and have shown great potential for CO2 adsorption and separation applications. However, the adsorption and diffusion mechanisms of CO2 in functionalized MOFs from the perspective of binding energies are still not clear. Actually, the adsorption and diffusion mechanisms can be revealed more intuitively by the binding energies of CO2 with the functionalized MOFs. In this work, a combination of molecular dynamics simulation and density functional theory calculation was performed to study CO2 adsorption and diffusion mechanisms in five different functionalized isoreticular MOFs (IRMOF-1 through -5), considering the influence of functionalized linkers on the adsorption capacity of functionalized MOFs. The results show that the CO2 uptake is determined by two elements: the binding energy and porosity of MOFs. The porosity of the MOFs plays a dominant role in IRMOF-5, resulting in the lowest level of CO2 uptake. The potential of mean force (PMF) of CO2 is strongest at the CO2/functionalized MOFs interface, which is consistent with the maximum CO2 density distribution at the interface. IRMOF-3 with the functionalized linker -NH2 shows the highest CO2 uptake due to the higher porosity and binding energy. Although IRMOF-5 with the functionalized linker -OC5H11 exhibits the lowest diffusivity of CO2 and the highest binding energy, it shows the lowest CO2 uptake. Accordingly, among the five simulated functionalized MOFs, IRMOF-3 is an excellent CO2 adsorbent and IRMOF-5 can be used to separate CO2 from other gases, which will be helpful for the designing of CO2 capture devices. This work will contribute to the design and screening of materials for CO2 adsorption and separation in practical applications.

Enhancement of CO2 adsorption and separation in basic ionic liquid/ZIF-8 with core-shell structure

A novel strategy was proposed to improve the performance of gas separation in nano-materials, by fabricating a core-shell structure out of the basic ionic liquid ([Emim]2[IDA]) and zeolitic imidazolate framework (ZIF-8). The [Emim]2[IDA]/ZIF-8 exhibits a remarkable CO2 adsorption capacity of 14 cm3 g-1 at 298 K and 20 kPa, the ideal selectivity of CO2/N2 is as high as 104 and CO2/CH4 is 348 at 298 K and 100 kPa, which are much higher than the CO2 adsorption capacity (4.3 cm3 g-1) and the selectivity (SCO2/N2 = 7.4, SCO2/CH4 = 2.7) of ZIF-8. This work could pave the way for designing advanced nanostructures tailored for gas separation.

Metal-Organic Frameworks for Water Harvesting and Concurrent Carbon Capture: A Review for Hygroscopic Materials

As water scarcity becomes a pending global issue, hygroscopic materials prove a significant solution. Thus, there is a good cause following the structure-performance relationship to review the recent development of hygroscopic materials and provide inspirational insight into creative materials. Herein, traditional hygroscopic materials, crystalline frameworks, polymers, and composite materials are reviewed. The similarity in working conditions of water harvesting and carbon capture makes simultaneously addressing water shortages and reduction of greenhouse effects possible. Concurrent water harvesting and carbon capture is likely to become a future challenge. Therefore, an emphasis is laid on metal-organic frameworks (MOFs) for their excellent performance in water and CO2 adsorption, and representative role of micro- and mesoporous materials. Herein, the water adsorption mechanisms of MOFs are summarized, followed by a review of MOF's water stability, with a highlight on the emerging machine learning (ML) technique to predict MOF water stability and water uptake. Recent advances in the mechanistic elaboration of moisture's effects on CO2 adsorption are reviewed. This review summarizes recent advances in water-harvesting porous materials with special attention on MOFs and expects to direct researchers' attention into the topic of concurrent water harvesting and carbon capture as a future challenge.

Perfluoroalkyl-Decorated Noble-Metal-Free MOFs for the Highly Efficient One-Pot Four-Component Coupling between Aldehydes, Amines, Alkynes, and Flue Gas CO2

The non-noble-metal catalysed-multicomponent reactions between flue gas CO2 and cheap industrial raw stocks into high value-added fine chemicals is a promising manner for the ideal CO2 utilization route. To achieve this, the key fundamental challenge is the rational development of highly efficient and facile reaction pathway while establishing compatible catalytic system. Herein, through the stepwise solvent-assisted linker installation, post-synthetic fluorination and metalation, we report the construction of a series of perfluoroalkyl-decorated noble-metal-free metal-organic frameworks (MOFs) PCN-(BPY-CuI)-(TPDC-Fx ) [BPY=2,2'-bipyridine-5,5'-dicarboxylate, TPDC-NH2 =2'-amino-[1,1':4',1''-terphenyl]-4,4''-dicarboxylic acid] that can catalyze the one-pot four-component reaction between alkyne, aldehyde, amine and flue gas CO2 for the preparation of 2-oxazolidinones. Such assembly endows the MOFs with superhydrophobic microenvironment, superior water resistance and highly stable catalytic site, leading to 21 times higher turnover numbers than that of homogeneous counterparts. Mechanism investigation implied that the substrates can be efficiently enriched by the MOF wall and then the adsorbed amine species act as an extrinsic binding site towards dilute CO2 through their strong preferential formation to carbamate acid. Moreover, density functional theory calculations suggest the tetrahedral geometry of Cu in MOF offers special resistance towards amine poisoning, thus maintaining its high efficiency during the catalytic process.

Water-Enhanced Direct Air Capture of Carbon Dioxide in Metal-Organic Frameworks

We have developed two series of amine-functionalized zirconium (Zr) metal-organic framework-808 (MOF-808), which were produced by postsynthetic modifications to have either amino acids coordinated to Zr ions (MOF-808-AAs) or polyamines covalently bound to the chloro-functionalized structure (MOF-808-PAs). These MOF variants were comprehensively characterized by liquid-state 1H nuclear magnetic resonance (NMR) measurements and potentiometric acid-base titration to determine the amounts of amines, energy-dispersive X-ray spectroscopy to assess the extent of covalent substitution by polyamines, powder X-ray diffraction analysis to verify the maintenance of the MOF crystallinity and structure after postsynthetic modifications, nitrogen sorption isotherm measurements to confirm retention of the porosity, and water sorption isotherm measurements to find the water uptake in the pores of each member of the series. Evaluation and testing of these compounds in direct air capture (DAC) of CO2 showed improved CO2 capture performance for the functionalized forms, especially under humid conditions: In dry conditions, the l-lysine- and tris(3-aminopropyl)amine-functionalized variants, termed as MOF-808-Lys and MOF-808-TAPA, exhibited the highest CO2 uptakes at 400 ppm, measuring 0.612 and 0.498 mmol g-1, and further capacity enhancement was achieved by introducing 50% relative humidity, resulting in remarkable uptakes of 1.205 and 0.872 mmol g-1 corresponding to 97 and 75% increase compared to the dry uptakes, respectively. The mechanism underlying the enhanced uptake efficiency was revealed by 13C solid-state NMR and temperature-programmed desorption measurements, indicating the formation of bicarbonate species, and therefore a stoichiometry of 1:1 CO2 to each amine site.

Water-stable metal-organic frameworks (MOFs): rational construction and carbon dioxide capture

Metal-organic frameworks (MOFs) are considered to be a promising porous material due to their excellent porosity and chemical tailorability. However, due to the relatively weak strength of coordination bonds, the stability (e.g., water stability) of MOFs is usually poor, which severely inhibits their practical applications. To prepare water-stable MOFs, several important strategies such as increasing the bonding strength of building units and introducing hydrophobic units have been proposed, and many MOFs with excellent water stability have been prepared. Carbon dioxide not only causes a range of climate and health problems but also is a by-product of some important chemicals (e.g., natural gas). Due to their excellent adsorption performances, MOFs are considered as a promising adsorbent that can capture carbon dioxide efficiently and energetically, and many water-stable MOFs have been used to capture carbon dioxide in various scenarios, including flue gas decarbonization, direct air capture, and purified crude natural gas. In this review, we first introduce the design and synthesis of water-stable MOFs and then describe their applications in carbon dioxide capture, and finally provide some personal comments on the challenges facing these areas.

Rational Design and Reticulation of Infinite qbe Rod Secondary Building Units into Metal-Organic Frameworks through a Global Desymmetrization Approach for Inverse C3 H8 /C3 H6 Separation

The development of reticular chemistry has enabled the construction of a large array of metal-organic frameworks (MOFs) with diverse net topologies and functions. However, dominating this class of materials are those built from discrete/finite secondary building units (SBUs), yet the designed synthesis of frameworks involving infinite rod-shaped SBUs remain underdeveloped. Here, by virtue of a global linker desymmetrization approach, we successfully targeted a novel Cu-MOF (Cu-ASY) incorporating infinite Cu-carboxylate rod SBUs with its structure determined by micro electron diffraction (MicroED) crystallography. Interestingly, the rod SBU can be simplified as a unique cylindric sphere packing qbe tubule made of [43 .62 ] tiles, which further connect the tritopic linkers to give a newly discovered 3,5-connected gfc net. Cu-ASY is a permanent ultramicroporous material featuring 1D channels with highly inert surfaces and shows a preferential adsorption of propane (C3 H8 ) over propene (C3 H6 ). The efficiency of C3 H8 selective Cu-ASY is validated by multicycle breakthrough experiments, giving C3 H6 productivity of 2.2 L/kg. Density functional theory (DFT) calculations reveal that C3 H8 molecules form multiple C-H⋅⋅⋅π and atypical C-H⋅⋅⋅ H-C van der Waals interactions with the inner nonpolar surfaces. This work therefore highlights the linker desymmetrization as an encouraging and intriguing strategy for achieving unique MOF structures and properties.

Design of Amine-Containing Nanoporous Materials for Postcombustion CO2 Capture from Engineering Perspectives

ConspectusCarbon dioxide (CO2) capture and storage (CCS) is a means to enable the continued use of fossil fuels in the short term. In particular, postcombustion CO2 capture has attracted considerable attention because it can be retrofitted into existing power plants and industrial plants. Among various CO2 capture technologies, the absorption of CO2 using aqueous amines has been industrially employed for decades. However, such amine scrubbing technologies have inherent limitations of environmental and health concerns due to volatile amine loss, corrosion, and high energy demands for regeneration. To overcome these limitations, CO2 adsorption using solid adsorbents has emerged as a promising alternative due to its noncorrosiveness and low energy demand. Various amine-containing adsorbents have been synthesized and investigated for postcombustion CO2 capture. These materials are prepared by physically impregnating low-vapor-pressure amine polymers or by chemically grafting amines onto nanoporous materials. A wide variety of amine guests and nanoporous hosts (e.g., SiO2, Al2O3, zeolites, MOFs, and polymers) have been combined to develop advanced CO2 adsorbents.The design of CO2 adsorbents is a multifaceted puzzle that must ultimately consider integration with large-scale CO2 capture processes. Various engineering aspects need to be carefully considered. Unfortunately, a significant proportion of previous studies has primarily focused on the use of novel materials for improving the CO2 adsorption capacity. In this Account, we describe key challenges and solutions to develop energy-efficient and stable amine-containing adsorbents for postcombustion CO2 capture via temperature swing adsorption (TSA). We found that a high CO2 working capacity, often overemphasized in the literature, does not necessarily guarantee a low energy demand for CO2 capture. Suppressing coadsorption of H2O during the CO2 adsorption in humid flue gas is also a significant factor. Amine-containing adsorbents can be degraded through various pathways, including hydrothermal degradation of nanoporous hosts and chemical degradation of amine guests via urea formation and oxidation. To inhibit such degradation pathways, it is extremely important to properly design the nanoporous structures of the hosts and the molecular structures of the amine guests. By combining macroporous silica hosts, poly(ethylenimine) (PEI) functionalized with various alkyl epoxides, and phosphate-based oxidative stabilizers, we could synthesize adsorbents exhibiting low energy demands for CO2 capture and unprecedentedly high thermochemical stability under TSA conditions. The macroporous silica host synthesized by assembling fumed silica particles via spray-drying exhibited high hydrothermal stability and enabled uniform distribution of bulky amine polymers within its pores. The functionalization of PEI with alkyl epoxides converted its primary amines into hindered secondary amines, leading to a significant reduction in energy demand for TSA cycles and a remarkable improvement in long-term stabilities. The oxidative stability of amines could be drastically improved by adding phosphate metal-binding reagents, which can poison ppm-level metal impurities that catalyze amine oxidation. The present discussions will provide important insights into designing practical adsorbents for CO2 capture from engineering perspectives.

Optimizing Sieving Effect for CO2 Capture from Humid Air Using an Adaptive Ultramicroporous Framework

Excessive CO2 in the air can not only lead to serious climate problems but also cause serious damage to humans in confined spaces. Here, a novel metal-organic framework (FJI-H38) with adaptive ultramicropores and multiple active sites is prepared. It can sieve CO2 from air with the very high adsorption capacity/selectivity but the lowest adsorption enthalpy among the reported physical adsorbents. Such excellent adsorption performances can be retained even at high humidity. Mechanistic studies show that the polar ultramicropore is very suitable for molecular sieving of CO2 from N2 , and the distinguishable adsorption sites for H2 O and CO2 enable them to be co-adsorbed. Notably, the adsorbed-CO2 -driven pore shrinkage can further promote CO2 capture while the adsorbed-H2 O-induced phase transitions in turn inhibit H2 O adsorption. Moreover, FJI-H38 has excellent stability and recyclability and can be synthesized on a large scale, making it a practical trace CO2 adsorbent. This will provide a new strategy for developing practical adsorbents for CO2 capture from the air.

Analysis and Refinement of Host-Guest Interactions in Metal-Organic Frameworks

ConspectusMetal-organic frameworks (MOFs) are a class of hybrid porous materials characterized by their periodic assembly using metal ions and organic ligands through coordination bonds. Their high crystallinity, extensive surface area, and adjustable pore sizes make them promising candidates for a wide array of applications. These include gas adsorption and separation, substrate binding, and catalysis, of relevance to tackling pressing global issues such as climate change, energy challenges, and pollution. In comparison to traditional porous materials such as zeolites and activated carbons, the design flexibility of organic ligands in MOFs, coupled with their orderly arrangement with associated metal centers, allows for the precise engineering of uniform pore environments. This unique feature enables a rich variety of interactions between the MOF host and adsorbed gas molecules, which are fundamental to understanding the observed uptake capacity and selectivity for target gas molecules and thus the overall performance of the material.In this Account, a data set for three-dimensional MOFs has been constructed based upon the structural analysis of host-guest interactions using the largest experimental database, the Cambridge Structural Database (CSD). A full screening was performed on structures with guest molecules of H2, C2H2, CO2, and SO2, and the relationship between the primary binding site, the isosteric heats of adsorption (Qst), and the adsorption uptake was extracted and established. We review the methodologies to refine host-guest interactions based primarily on our studies on the host-guest chemistry of MOFs. The methods include ligand functionalization, variation of metal centers, formation of defects, addition of single atom sites, and control of pore size and structure. In situ structural and dynamic investigations using diffraction and spectroscopic techniques are powerful tools to visualize the details of host-guest interactions upon the above modifications, affording key insights into functional performance at a molecular level. Finally, we give an outlook of future research priorities in the study of host-guest chemistry in MOF materials. We hope this Account will encourage the rational development and improvement of future MOF-based sorbents for applications in challenging gas adsorption, separations, and catalysis.

Suitability of a diamine functionalized metal-organic framework for direct air capture

The increase in the atmospheric carbon dioxide level is a significant threat to our planet, and therefore the selective removal of CO2 from the air is a global concern. Metal-organic frameworks (MOFs) are a class of porous materials that have shown exciting potential as adsorbents for CO2 capture due to their high surface area and tunable properties. Among several implemented technologies, direct air capture (DAC) using MOFs is a promising strategy for achieving climate targets as it has the potential to actively reduce the atmospheric CO2 concentration to a safer levels. In this study, we investigate the stability and regeneration conditions of N,N'-dimethylethylenediamine (mmen) appended Mg2(dobpdc), a MOF with exceptional CO2 adsorption capacity from atmospheric air. We employed a series of systematic experiments including thermogravimetric analysis (TGA) coupled with Fourier transformed infrared (FTIR) and gas chromatography mass spectrometer (GCMS) (known as TGA-FTIR-GCMS), regeneration cycles at different conditions, control and accelerated aging experiments. We also quantified CO2 and H2O adsorption under humid CO2 using a combination of data from TGA-GCMS and coulometric Karl-Fischer titration techniques. The quantification of CO2 and H2O adsorption under humid conditions provides vital information for the design of real-world DAC systems. Our results demonstrate the stability and regeneration conditions of mmen appended Mg2(dobpdc). It is stable up to 50% relative humidity when the adsorption temperature varies from 25-40 °C and the best regeneration condition can be achieved at 120 °C under dynamic vacuum and at 150 °C under N2.

Enhancing photosynthetic CO2 fixation by assembling metal-organic frameworks on Chlorella pyrenoidosa

The CO2 concentration at ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) is crucial to improve photosynthetic efficiency for biomass yield. However, how to concentrate and transport atmospheric CO2 towards the Rubisco carboxylation is a big challenge. Herein, we report the self-assembly of metal-organic frameworks (MOFs) on the surface of the green alga Chlorella pyrenoidosa that can greatly enhance the photosynthetic carbon fixation. The chemical CO2 concentrating approach improves the apparent photo conversion efficiency to about 1.9 folds, which is up to 9.8% in ambient air from an intrinsic 5.1%. We find that the efficient carbon fixation lies in the conversion of the captured CO2 to the transportable HCO3- species at bio-organic interface. This work demonstrates a chemical approach of concentrating atmospheric CO2 for enhancing biomass yield of photosynthesis.

An amine decorated MOF for direct capture of CO2 from ambient air

A Zn(II)-based metal-organic framework (MOF) was synthesized by the self-assembly of the dicarboxylate ligand terephthalic acid (TPA), 2-aminoterephthalic acid (NH2-TPA) and N-donor auxiliary ligand 1,4-bis(4-pyridinylmethyl)piperazine (bpmp) using Zn(NO3)2·6H2O under hydrothermal conditions. {[Zn(TPA)0.5(NH2TPA)0.5(bpmp)]·DMF·7H2O}n (framework 1) has an sra topology with a BET surface area of 756 m2 g-1. The microporous nature of the framework is apparent from the significant CO2 adsorption capacities observed at various temperatures: 57 cc g-1 at 283 K, 46 cc g-1 at 293 K, 37 cc g-1 at 303 K, and 30 cc g-1 at 313 K. The considerable CO2 adsorption may be caused by the existence of free carboxylate and amine substituents that interact with the gas molecules and micropores. At room temperature, the activated MOF readily converts CO2 into cyclic carbonates when a suspension of the MOF is bubbled with ambient air and different epoxides under solvent-free conditions. The amine groups located within the pores of the MOF interact with CO2 molecules, enhancing their sorption and conversion to cyclic carbonates. However, due to interpenetration within framework 1, only smaller size epoxides can be accommodated and converted to cyclic carbonates in good yields. Additionally, the effectiveness of the catalyst is further confirmed by the positive outcomes obtained from the hot filtration control test. Grand canonical Monte Carlo (GCMC) molecular simulations were utilized to gain a better understanding of molecular interactions. GCMC results are in line with the experiments. The substantial adsorption of CO2 can be ascribed to the strong intermolecular interactions that occur between the amine groups within the framework and the CO2 molecules.

Structural Compromise Between Conflicted Spatial-Arrangements of Two Linkers in Metal-Organic Frameworks

The structural control of metal-organic frameworks (MOFs) is essential for the development of superlative MOFs because the structural features of MOFs and their components play a critical role in determining their properties, and ultimately, their applications. The best components to endow the desired properties for MOFs are available via the appropriate choice from many existing chemicals or synthesizing new ones. However, to date, considerably less information exists regarding fine-tuning the MOF structures. Herein, a strategy for tuning MOF structures by merging two MOF structures into a single MOF, is demonstrated. Depending on the incorporated amounts and relative contributions of the two coexisting organic linkers, benzene-1,4-dicarboxylate (BDC^2- ) and naphthalene-1,4-dicarboxylate (NDC^2- ), which have conflicting spatial-arrangement preferences within an MOF structure, MOFs are rationally designed to have a Kagomé or rhombic lattice. In particular, MOFs with rhombic lattices are constructed to have specific lattice angles by compromising the optimal structural arrangements between the two mixed linkers. The relative contributions of the two linkers during MOF construction determine the final MOF structures, and the competitive influence between BDC^2- and NDC^2- is effectively regulated to produce specific MOF structures with controlled lattices.

Unveiling Unexpected Modulator-CO2 Dynamics within a Zirconium Metal-Organic Framework

Carbon capture, storage, and utilization (CCSU) represents an opportunity to mitigate carbon emissions that drive global anthropogenic climate change. Promising materials for CCSU through gas adsorption have been developed by leveraging the porosity, stability, and tunability of extended crystalline coordination polymers called metal-organic frameworks (MOFs). While the development of these frameworks has yielded highly effective CO₂ sorbents, an in-depth understanding of the properties of MOF pores that lead to the most efficient uptake during sorption would benefit the rational design of more efficient CCSU materials. Though previous investigations of gas-pore interactions often assumed that the internal pore environment was static, discovery of more dynamic behavior represents an opportunity for precise sorbent engineering. Herein, we report a multifaceted in situ analysis following the adsorption of CO₂ in MOF-808 variants with different capping agents (formate, acetate, and trifluoroacetate: FA, AA, and TFA, respectively). In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis paired with multivariate analysis tools and in situ powder X-ray diffraction revealed unexpected CO₂ interactions at the node associated with dynamic behavior of node-capping modulators in the pores of MOF-808, which had previously been assumed to be static. MOF-808-TFA displays two binding modes, resulting in higher binding affinity for CO₂. Computational analyses further support these dynamic observations. The beneficial role of these structural dynamics could play an essential role in building a deeper understanding of CO₂ binding in MOFs.

Effect of Functional Groups on Low-Concentration Carbon Dioxide Capture in -Type Metal-Organic Frameworks

The selective capture of low-concentration CO₂ from air or confined spaces remains a great challenge. In this study, various functional groups were introduced into UiO-66 to generate functionalized derivatives (UiO-66-R, R = NO₂, NH₂, OH, and CH₃), aiming at significantly enhancing CO₂ adsorption and separation efficiency. More significantly, UiO-66-NO₂ and UiO-66-NH₂ with high polarity exhibit exceptional CO₂ affinity and optimal separation characteristics in mixed CO₂/O₂/N₂ (1:21:78). In addition, the impressive stability of UiO-66-NO₂ and UiO-66-NH₂ endows them with excellent recycling stability. The effective adsorption and separation performances demonstrated by these two functional materials suggest their potential as promising physical adsorbents for capturing low-concentration CO₂.

Implementation of a Core-Shell Design Approach for Constructing MOFs for CO2 Capture

Adsorption-based capture of CO₂ from flue gas and from air requires materials that have a high affinity for CO₂ and can resist water molecules that competitively bind to adsorption sites. Here, we present a core-shell metal-organic framework (MOF) design strategy where the core MOF is designed to selectively adsorb CO₂, and the shell MOF is designed to block H₂O diffusion into the core. To implement and test this strategy, we used the zirconium (Zr)-based UiO MOF platform because of its relative structural rigidity and chemical stability. Previously reported computational screening results were used to select optimal core and shell MOF compositions from a basis set of possible building blocks, and the target core-shell MOFs were prepared. Their compositions and structures were characterized using scanning electron microscopy, transmission electron microscopy, and powder X-ray diffraction. Multigas (CO₂, N₂, and H₂O) sorption data were collected both for the core-shell MOFs and for the core and shell MOFs individually. These data were compared to determine whether the core-shell MOF architecture improved the CO₂ capture performance under humid conditions. The combination of experimental and computational results demonstrated that adding a shell layer with high CO₂/H₂O diffusion selectivity can significantly reduce the effect of water on CO₂ uptake.

CO2 Aggregation on Monoethanolamine: Observations from Rotational Spectroscopy

The initial stages of the gas-phase nucleation between CO₂ and monoethanolamine were investigated via broadband rotational spectroscopy with the aid of extensive theoretical structure sampling. Sub-nanometer-scale aggregation patterns of monoethanolamine-(CO₂ )_n , n=1-4, were identified. An interesting competition between the monoethanolamine intramolecular hydrogen bond and the intermolecular interactions between monoethanolamine and CO₂ upon cluster growth was discovered, revealing an intriguing CO₂ binding priority to the hydroxyl group over the amine group. These findings are in sharp contrast to the general results for aqueous solutions. In the quinary complex, a cap-like CO₂ tetramer was observed cooperatively surrounding the monoethanolamine. As the cluster approaches the critical size of new particle formation, the contribution of CO₂ self-assembly to the overall stability increases.

Probing the Kinetic Origin of Varying Oxidative Stability of Ethyl- vs. Propyl-spaced Amines for Direct Air Capture

Amine-based adsorbents are promising for direct air capture of CO₂ , yet oxidative degradation remains a key unmitigated risk hindering wide-scale deployment. Borrowing wisdom from the basic auto-oxidation scheme, insights are gained into the underlying degradation mechanisms of polyamines by quantum chemical, advanced sampling simulations, adsorbent synthesis, and accelerated degradation experiments. The reaction kinetics of polyamines are contrasted with that of typical aliphatic polymers and they elucidate for the first time the critical role of aminoalkyl hydroperoxide decomposition in the oxidative degradation of amino-oligomers. The experimentally observed variation in oxidative stability of polyamines with different backbone structures is explained by the relationship between the local chemical structure and the free energy barrier of aminoalkyl hydroperoxide decomposition, suggesting that its energetics can be used as a descriptor to screen and design new polyamines with improved stability. The developed computational capability sheds light on radical-induced degradation chemistry of other organic functional materials.

Metal-Organic Frameworks for Greenhouse Gas Applications

Using petrol to supply energy for a car or burning coal to heat a building generates plenty of greenhouse gas (GHG) emissions, including carbon dioxide (CO₂ ), water vapor (H₂ O), methane (CH₄ ), nitrous oxide (N₂ O), ozone (O₃ ), fluorinated gases. These up-and-coming metal-organic frameworks (MOFs) are structurally endowed with rigid inorganic nodes and versatile organic linkers, which have been extensively used in the GHG-related applications to improve the lives and protect the environment. Porous MOF materials and their derivatives have been demonstrated to be competitive and promising candidates for GHG separation, storage and conversions as they shows facile preparation, large porosity, adjustable nanostructure, abundant topology, and tunable physicochemical property. Enormous progress has been made in GHG storage and separation intrinsically stemmed from the different interaction between guest molecule and host framework from MOF itself in the recent five years. Meanwhile, the use of porous MOF materials to transform GHG and the influence of external conditions on the adsorption performance of MOFs for GHG are also enclosed. In this review, it is also highlighted that the existing challenges and future directions are discussed and envisioned in the rational design, facile synthesis and comprehensive utilization of MOFs and their derivatives for practical applications.

Low-concentration CO2 capture using metal-organic frameworks - current status and future perspectives

The ever-increasing atmospheric CO₂ level is considered to be the major cause of climate change. Although the move away from fossil fuel-based energy generation to sustainable energy sources would significantly reduce the release of CO₂ into the atmosphere, it will most probably take time to be fully implemented on a global scale. On the other hand, capturing CO₂ from emission sources or directly from the atmosphere are robust approaches that can reduce the atmospheric CO₂ concentration in a relatively short time. Here, we provide a perspective on the recent development of metal-organic framework (MOF)-based solid sorbents that have been investigated for application in CO₂ capture from low-concentration (<10 000 ppm) CO₂ sources. We summarized the different sorbent engineering approaches adopted by researchers, both from the sorbent development and processing viewpoints. We also discuss the immediate challenges of using MOF-based CO₂ sorbents for low-concentration CO₂ capture. MOF-based materials, with tuneable pore properties and tailorable surface chemistry, and ease of handling, certainly deserve continued development into low-cost, efficient CO₂ sorbents for low-concentration CO₂ capture.

Effect of Spatial Heterogeneity on the Unusual Uptake Behavior of Multivariate-Metal-Organic Frameworks

The uniqueness of multivariate metal-organic frameworks (MTV-MOFs) has been widely explored to discover their unknown opportunities. While mesoscopic apportionments have been studied, macroscopic heterogeneity and its spatial effects remain unexplored in MTV-MOFs. In this study, we investigated the effect of macroscopic heterogeneity on MTV-MOFs on their uptake behaviors by comparing three types of MTV-MOFs having the functional groups in inner, outer, or entire parts of crystals. Their adsorption behavior for carbon dioxide (CO₂) and water (H₂O) brought out that functional groups located in the outer part of the crystals dominantly influence the sorption behavior of MTV-MOFs. These results are also visualized by observing iodine adsorption in the three types of MTV-MOFs using scanning transmission electron microscopy-electron energy loss spectroscopy. We believe that this finding provides new ways to decipher and design MTV-MOFs for their unusual properties.

Nuclear magnetic resonance studies of carbon dioxide capture

Carbon dioxide capture is an important greenhouse gas mitigation technology that can help limit climate change. The design of improved capture materials requires a detailed understanding of the mechanisms by which carbon dioxide is bound. Nuclear magnetic resonance (NMR) spectroscopy methods have emerged as a powerful probe of CO2 sorption and diffusion in carbon capture materials. In this article, we first review the practical considerations for carrying out NMR measurements on capture materials dosed with CO2 and we then present three case studies that review our recent work on NMR studies of CO2 binding in metal-organic framework materials. We show that simple 13C NMR experiments are often inadequate to determine CO2 binding modes, but that more advanced experiments such as multidimensional NMR experiments and 17O NMR experiments can lead to more conclusive structural assignments. We further discuss how pulsed field gradient (PFG) NMR can be used to explore diffusion of adsorbed CO2 through the porous framework. Finally, we provide an outlook on the challenges and opportunities for the further development of NMR methodologies that can improve our understanding of carbon capture.

Revealing carbon capture chemistry with 17-oxygen NMR spectroscopy

Carbon dioxide capture is essential to achieve net-zero emissions. A hurdle to the design of improved capture materials is the lack of adequate tools to characterise how CO₂ adsorbs. Solid-state nuclear magnetic resonance (NMR) spectroscopy is a promising probe of CO₂ capture, but it remains challenging to distinguish different adsorption products. Here we perform a comprehensive computational investigation of 22 amine-functionalised metal-organic frameworks and discover that ¹⁷O NMR is a powerful probe of CO₂ capture chemistry that provides excellent differentiation of ammonium carbamate and carbamic acid species. The computational findings are supported by ¹⁷O NMR experiments on a series of CO₂-loaded frameworks that clearly identify ammonium carbamate chain formation and provide evidence for a mixed carbamic acid - ammonium carbamate adsorption mode. We further find that carbamic acid formation is more prevalent in this materials class than previously believed. Finally, we show that our methods are readily applicable to other adsorbents, and find support for ammonium carbamate formation in amine-grafted silicas. Our work paves the way for investigations of carbon capture chemistry that can enable materials design.

High-Selective CO2 Capture in Amine-Decorated Al-MOFs

Amine-functionalized metal-organic framework (MOF) material is a promising CO₂ captor in the post-combustion capture process owing to its large CO₂ working capacity as well as high CO₂ selectivity and easy regeneration. In this study, an ethylenediamine (ED)-decorated Al-based MOFs (named ED@MOF-520) with a high specific area and permanent porosity are prepared and evaluated to study the adsorption and separation of CO₂ from N₂. The results show that ED@MOF-520 adsorbent displays a superior CO₂ capture performance with a CO₂/N₂ separation factor of 50 at 273 K, 185% times increase in the CO₂/N₂ separation efficiency in comparison with blank MOF-520. Furthermore, ED@MOF-520 exhibits a moderate-strength interaction with 29 kJ mol^-1 adsorption heat for CO₂ uptake, which not only meets the requirement of CO₂ adsorption but also has good cycle stability. This work provides a promising adsorbent with a high CO₂/N₂ separation factor to deal with carbon peak and carbon neutrality.

Review on CO2 Capture Using Amine-Functionalized Materials

CO₂ capture from industry sectors or directly from the atmosphere is drawing much attention on a global scale because of the drastic changes in the climate and ecosystem which pose a potential threat to human health and life on Earth. In the past decades, CO₂ capture technology relied on classical liquid amine scrubbing. Due to its high energy consumption and corrosive property, CO₂ capture using solid materials has recently come under the spotlight. A variety of porous solid materials were reported such as zeolites and metal-organic frameworks. However, amine-functionalized porous materials outperform all others in terms of CO₂ adsorption capacity and regeneration efficiency. This review provides a brief overview of CO₂ capture by various amines and mechanistic aspects for newcomers entering into this field. This review also covers a state-of-the-art regeneration method, visible/UV light-triggered CO₂ desorption at room temperature. In the last section, the current issues and future perspectives are summarized.

Carbon dioxide and hydrogen adsorption study on surface-modified HKUST-1 with diamine/triamine

The present article intended to study the influence of post-synthetic modification with ethylenediamine (en, diamine) and diethylenetriamine (deta, triamine) within the coordinatively unsaturated sites (CUSs) of HKUST-1 on carbon dioxide and hydrogen storage. The as-sythesized adsorbent was solvent-exchanged and subsequently post-synthetically modified with di-/triamines as sources of amine-based sorption sites due to the increased CO₂ storage capacity. It is known that carbon dioxide molecules have a high affinity for amine groups, and moreover, the volume of amine molecules itself reduces the free pore volume in HKUST-1, which is the driving force for increasing the hydrogen storage capacity. Different concentrations of amines were used for modification of HKUST-1, through which materials with different molar ratios of HKUST-1 to amine: 1:0.05; 1:0.1; 1:0.25; 1:0.5; 1:0.75; 1:1; 1:1.5 were synthesized. Adsorption measurements of carbon dioxide at 0 °C up to 1 bar have shown that the compounds can adsorb large amounts of carbon dioxide. In general, deta-modified samples showed higher adsorbed amounts of CO₂ compared to en-modified materials, which can be explained by the higher number of amine groups within the deta molecule. With an increasing molar ratio of amines, there was a decrease in wt.% CO₂. The maximum storage capacity of CO₂ was 22.3 wt.% for HKUST-1: en/1:0.1 and 33.1 wt.% for HKUST-1: deta/1:0.05 at 0 °C and 1 bar. Hydrogen adsorption measurements showed the same trend as carbon dioxide, with the maximum H₂ adsorbed amounts being 1.82 wt.% for HKUST-1: en/1:0.1 and 2.28 wt.% for HKUST-1: deta/1:0.05 at − 196 °C and 1 bar.

The influence of ambient cure chemistry and stoichiometry on epoxy coating surfaces

The surface properties of epoxy resin coatings influence their function as substrates for subsequent coats. Variation in ambient cure conditions (temperature and relative humidity, RH), stoichiometry (ratio of epoxy: amine) and delay time between epoxy component mixing and film casting ("induction time") significantly altered the surface properties of ambient cured epoxy resin coatings (Dow Epoxy Novolac D.E.N. 431, resorcinol diglycidyl ether and 4,4-diaminodicyclohexylmethane). Gravimetric analysis showed that increasing induction time significantly reduced surface layer formation (carbamation) of cured epoxy resin coatings at 80% RH but had no measurable effect at 40% RH and below. RMS surface roughness increased with increasing RH and decreased with increasing induction time and ambient cure temperature, at two stoichiometric extremes. However, the net change in surface area arising from these conditions was not sufficient to significantly alter the equilibrium contact angles or wetting regime. We conclude that the observed significant variation in surface wettability was more likely to depend on variation in surface chemistry than roughness; stoichiometry was the variable which most significantly influenced surface wettability, average void volume and fractional free volume, while cure temperature significantly influenced the extent of cure at both stoichiometries. Off-stoichiometry formulation and elevated ambient cure temperature significantly increased system average void volume while fractional free volume decreased, which may be significant for the barrier properties of the final coating.

Prospects for Simultaneously Capturing Carbon Dioxide and Harvesting Water from Air

Mitigation of anthropogenic climate change is expected to require large-scale deployment of carbon dioxide removal strategies. Prominent among these strategies is direct air capture with sequestration (DACS), which encompasses the removal and long-term storage of atmospheric CO₂  by purely engineered means. Because it does not require arable land or copious amounts of freshwater, DACS is already attractive in the context of sustainable development, but opportunities to improve its sustainability still exist. Leveraging differences in the chemistry of CO₂  and water adsorption within porous solids, here, the prospect of simultaneously removing water alongside CO₂  in direct air capture operations is investigated. In many cases, the co-adsorbed water can be desorbed separately from chemisorbed CO₂  molecules, enabling efficient harvesting of water from air. Depending upon the material employed and process conditions, the desorbed water can be of sufficiently high purity for industrial, agricultural, or potable use and can thus improve regional water security. Additionally, the recovered water can offset a portion of the costs associated with DACS. In this Perspective, molecular- and process-level insights are combined to identify routes toward realizing this nascent yet enticing concept.

Carbazole-Equipped Metal-Organic Framework for Stability, Photocatalysis, and Fluorescence Detection

The useful yet underutilized backfolded design is invoked here for functionalizing porous solids with the versatile carbazole function. Specifically, we attach carbazole groups as backfolded side arms onto the backbone of a linear dicarboxyl linker molecule. The bulky carbazole side arms point away from the carboxyl links and do not disrupt the Zr-carboxyl framework formation; namely, the resultant MOF solid ZrL1 features the same net as that of the unfunctionalized dicarboxyl linker, also known as the PCN-111 net or UiO-66 net. The ZrL1 structure features only half linker occupancy (about 6 out of the 12 linkers around the Zr₆O₈ cluster being missing) and partially collapses upon activation (acetone exchange and evacuation). Notably, the stability improves after heating in diphenyl oxide at 260 °C (POP-260 treatment; to form ZrL1-260), as indicated by the higher crystallinity and surface area of the activated ZrL1-260 sample. The ZrL1-260 samples achieve 72% yield in photocatalyzing reductive dehalogenation of phenacyl bromide; ZrL1 can detect nitro-aromatic compounds via fluorescence quenching, with selectivity and sensitivity toward 4-nitroaniline, featuring a limit of detection of 96 ppb.

Recent advances in CO2 capture and reduction

Given the continuous and excessive CO₂ emission into the atmosphere from anthropomorphic activities, there is now a growing demand for negative carbon emission technologies, which requires efficient capture and conversion of CO₂ to value-added chemicals. This review highlights recent advances in CO₂ capture and conversion chemistry and processes. It first summarizes various adsorbent materials that have been developed for CO₂ capture, including hydroxide-, amine-, and metal organic framework-based adsorbents. It then reviews recent efforts devoted to two types of CO₂ conversion reaction: thermochemical CO₂ hydrogenation and electrochemical CO₂ reduction. While thermal hydrogenation reactions are often accomplished in the presence of H₂, electrochemical reactions are realized by direct use of electricity that can be renewably generated from solar and wind power. The key to the success of these reactions is to develop efficient catalysts and to rationally engineer the catalyst-electrolyte interfaces. The review further covers recent studies in integrating CO₂ capture and conversion processes so that energy efficiency for the overall CO₂ capture and conversion can be optimized. Lastly, the review briefs some new approaches and future directions of coupling direct air capture and CO₂ conversion technologies as solutions to negative carbon emission and energy sustainability.

Recent advances in direct air capture by adsorption

Significant progress has been made in direct air capture (DAC) in recent years. Evidence suggests that the large-scale deployment of DAC by adsorption would be technically feasible for gigatons of CO₂ capture annually. However, great efforts in adsorption-based DAC technologies are still required. This review provides an exhaustive description of materials development, adsorbent shaping, in situ characterization, adsorption mechanism simulation, process design, system integration, and techno-economic analysis of adsorption-based DAC over the past five years; and in terms of adsorbent development, affordable DAC adsorbents such as amine-containing porous materials with large CO₂ adsorption capacities, fast kinetics, high selectivity, and long-term stability under ultra-low CO₂ concentration and humid conditions. It is also critically important to develop efficient DAC adsorptive processes. Research and development in structured adsorbents that operate at low-temperature with excellent CO₂ adsorption capacities and kinetics, novel gas-solid contactors with low heat and mass transfer resistances, and energy-efficient regeneration methods using heat, vacuum, and steam purge is needed to commercialize adsorption-based DAC. The synergy between DAC and carbon capture technologies for point sources can help in mitigating climate change effects in the long-term. Further investigations into DAC applications in the aviation, agriculture, energy, and chemical industries are required as well. This work benefits researchers concerned about global energy and environmental issues, and delivers perspective views for further deployment of negative-emission technologies.

Covalent Organic Frameworks for Carbon Dioxide Capture from Air

We report the first covalent incorporation of reactive aliphatic amine species into covalent organic frameworks (COFs). This was achieved through the crystallization of an imine-linked COF, termed COF-609-Im, followed by conversion of its imine linkage to base-stable tetrahydroquinoline linkage through aza-Diels-Alder cycloaddition, and finally, the covalent incorporation of tris(3-aminopropyl)amine into the framework. The obtained COF-609 exhibits a 1360-fold increase in CO₂ uptake capacity compared to the pristine framework and a further 29% enhancement in the presence of humidity. We confirmed the chemistry of framework conversion and corroborated the enhanced CO₂ uptake phenomenon with and without humidity through isotope-labeled Fourier transform infrared spectroscopy and solid-state nuclear magnetic resonance spectroscopy. With this study, we established a new synthetic strategy to access a class of chemisorbents characterized by high affinity to CO₂ in dilute sources, such as the air.

Post-synthetic ligand cyclization in metal-organic frameworks through functional group connection with regioisomerism

A covalent connection between two orthogonal functional groups (-NH₂ and -OH) in metal-organic frameworks (MOFs) has been developed. This post-synthetic ligand cyclization (PSLC) was successfully demonstrated to synthesize a benzoxazole-functionalized MOF from a Zr-based UiO-66-2,3-(NH₂)(OH) under microwave irradiation. In contrast, the regioisomeric UiO-66-2,5-(NH₂)(OH) only produces a non-cyclized formamide-functionalized MOF.