Size Stability and H2/CO Selectivity for Au Nanoparticles during Electrocatalytic CO2 Reduction

Computational screening of defective BC3-supported single-atom catalysts for electrochemical CO2 reduction

The electrochemical CO2 reduction reaction (eCO2RR) driven by renewable electricity offers a green and sustainable technology for synthesizing chemicals and managing global carbon balance. However, developing electrocatalysts with high activity and selectivity for producing C1 products (CO, HCOOH, CH3OH, and CH4) remains a daunting task. In this study, we conducted comprehensive first-principles calculations to investigate the eCO2RR mechanism using B-defective BC3-supported transition metal single-atom catalysts (TM@BC3 SACs). Initially, we evaluated the thermodynamic and electrochemical stability of the designed 26 TM@BC3 SACs by calculating the binding energy and dissolution potential of the anchored TM atoms. Subsequently, the selectivity of the eCO2RR and hydrogen evolution reaction (HER) on stable SACs was determined by comparing the free energy change (ΔG) for the first protonation of CO2 with the ΔG of *H formation. The stability and selectivity screening processes enabled us to narrow down the pool of SACs to the 14 promising ones. Finally, volcano plots for the eCO2RR towards different C1 products were established by using the adsorption energy descriptors of key intermediates, and three SACs were predicted to exhibit high activity and selectivity. The limiting potentials (UL) for HCOOH production on Pd@BC3 and Ag@BC3 are -0.11 V and -0.14 V. CH4 is a preferred product on Re@BC3 with UL of -0.22 V. Elaborate electronic structure calculations elucidate that the activity and selectivity originate from the sufficient activation of the C-O bond and the strong orbital hybridization between crucial intermediates and metal atoms. The proposed catalyst screening criteria, constructed volcano plots and predicted SACs may provide a theoretical foundation for the development of computationally guided catalyst designs for electrochemical CO2 conversion to C1 products.

Toward Durable CO2 Electroreduction with Cu-Based Catalysts via Understanding Their Deactivation Modes

The technology of CO2 electrochemical reduction (CO2ER) provides a means to convert CO2, a waste greenhouse gas, into value-added chemicals. Copper is the most studied element that is capable of catalyzing CO2ER to obtain multicarbon products, such as ethylene, ethanol, acetate, etc., at an appreciable rate. Under the operating condition of CO2ER, the catalytic performance of Cu decays because of several factors that alters the surface properties of Cu. In this review, these factors that cause the degradation of Cu-based CO2ER catalysts are categorized into generalized deactivation modes, that are applicable to all electrocatalytic systems. The fundamental principles of each deactivation mode and the associated effects of each on Cu-based catalysts are discussed in detail. Structure- and composition-activity relationship developed from recent in situ/operando characterization studies are presented as evidence of related deactivation modes in operation. With the aim to address these deactivation modes, catalyst design and reaction environment engineering rationales are suggested. Finally, perspectives and remarks built upon the recent advances in CO2ER are provided in attempts to improve the durability of CO2ER catalysts.

Constructing Gold Single-Atom Catalysts on Hierarchical Nitrogen-Doped Carbon Nanocages for Carbon Dioxide Electroreduction to Syngas

Precious-metal single-atom catalysts (SACs), featured by high metal utilization and unique coordination structure for catalysis, demonstrate distinctive performances in the fields of heterogeneous and electrochemical catalysis. Herein, gold SACs are constructed on hierarchical nitrogen-doped carbon nanocages (hNCNC) via a simple impregnation-drying process and first exploited for electrocatalytic carbon dioxide reduction reaction (CO2RR) to produce syngas. The as-constructed Au SAC exhibits the high mass activity of 3319 A g-1 Au at -1.0 V (vs reversible hydrogen electrode, RHE), much superior to the Au nanoparticles supported on hNCNC. The ratio of H2/CO can be conveniently regulated in the range of 0.4-2.2 by changing the applied potential. Theoretical study indicates such a potential-dependent H2/CO ratio is attributed to the different responses of HER and CO2RR on Au single-atom sites coordinating with one N atom at the edges of micropores across the nanocage shells. The catalytic mechanism of the Au active sites is associated with the smooth switch between twofold and fourfold coordination during CO2RR, which much decreases the free energy changes of the rate-determining steps and promotes the reaction activity.

Regulation Strategy of Nanostructured Engineering on Indium-Based Materials for Electrocatalytic Conversion of CO2

Electrochemical carbon dioxide reduction (CO2 RR), as an emerging technology, can combine with sustainable energies to convert CO2 into high value-added products, providing an effective pathway to realize carbon neutrality. However, the high activation energy of CO2 , low mass transfer, and competitive hydrogen evolution reaction (HER) leads to the unsatisfied catalytic activity. Recently, Indium (In)-based materials have attracted significant attention in CO2 RR and a series of regulation strategies of nanostructured engineering are exploited to rationally design various advanced In-based electrocatalysts, which forces the necessary of a comprehensive and fundamental summary, but there is still a scarcity. Herein, this review provides a systematic discussion of the nanostructure engineering of In-based materials for the efficient electrocatalytic conversion of CO2 to fuels. These efficient regulation strategies including morphology, size, composition, defects, surface modification, interfacial structure, alloying, and single-atom structure, are summarized for exploring the internal relationship between the CO2 RR performance and the physicochemical properties of In-based catalysts. The correlation of electronic structure and adsorption behavior of reaction intermediates are highlighted to gain in-depth understanding of catalytic reaction kinetics for CO2 RR. Moreover, the challenges and opportunities of In-based materials are proposed, which is expected to inspire the development of other effective catalysts for CO2 RR.

Multimethod Approach to the Low-Overpotential Region of Micro- to Macro-Scale Working Electrodes of Sub-10 nm Gold Nanoparticles in the CO2 Reduction Reaction

The electrochemical carbon dioxide reduction reaction (CO2RR) over carbon-supported gold nanoparticles (AuNP) was investigated using a broad variety of (electro)analytical methods, including linear sweep voltammetry with a rotating disk electrode (LSV-RDE), sample-generation tip-collection mode of scanning electrochemical microscopy (SG/TC-SECM), as well as full cell tests with highly sensitive online gas chromatography (GC). In contrast to most other studies, this work focuses on the low-overpotential region (0 to -0.4 V vs RHE) where initial product formation is already detected and addresses micro- to macro-sized electrodes. The sub-10 nm AuNPs supported on three different carbon supports (CNTs and carbon blacks) were pretreated in H2/Ar to remove the stabilizer used during AuNP synthesis. LSV-RDE points toward different CO2RR mechanisms at the samples, additionally confirmed by the SG/TC-SECM and full cell tests with online GC. Besides H2 and CO, the AuNP supported on carbon nanotubes showed significant evolution of H2CO in contrast to the other two samples, which was additionally confirmed by accumulating the product during chronoamperometric RDE experiments followed by mass spectroscopic analysis. Surface analysis indicated a complete removal of residual thiolate stabilizer molecules exclusively at the AuNPs supported on carbon nanotubes, which may result in a change in the adsorption geometry or reaction mechanism at this sample. The results demonstrate the effectiveness of the combination of these multiple methods to investigate the CO2RR in the low-overpotential region.

Why surface hydrophobicity promotes CO2 electroreduction: a case study of hydrophobic polymer N-heterocyclic carbenes

We report the use of polymer N-heterocyclic carbenes (NHCs) to control the microenvironment surrounding metal nanocatalysts, thereby enhancing their catalytic performance in CO2 electroreduction. Three polymer NHC ligands were designed with different hydrophobicity: hydrophilic poly(ethylene oxide) (PEO-NHC), hydrophobic polystyrene (PS-NHC), and amphiphilic block copolymer (BCP) (PEO-b-PS-NHC). All three polymer NHCs exhibited enhanced reactivity of gold nanoparticles (AuNPs) during CO2 electroreduction by suppressing proton reduction. Notably, the incorporation of hydrophobic PS segments in both PS-NHC and PEO-b-PS-NHC led to a twofold increase in the partial current density for CO formation, as compared to the hydrophilic PEO-NHC. While polymer ligands did not hinder ion diffusion, their hydrophobicity altered the localized hydrogen bonding structures of water. This was confirmed experimentally and theoretically through attenuated total reflectance surface-enhanced infrared absorption spectroscopy and molecular dynamics simulation, demonstrating improved CO2 diffusion and subsequent reduction in the presence of hydrophobic polymers. Furthermore, NHCs exhibited reasonable stability under reductive conditions, preserving the structural integrity of AuNPs, unlike thiol-ended polymers. The combination of NHC binding motifs with hydrophobic polymers provides valuable insights into controlling the microenvironment of metal nanocatalysts, offering a bioinspired strategy for the design of artificial metalloenzymes.

Enhanced the Efficiency of Electrocatalytic CO2 -to-CO Conversion by Cd Species Anchored into Metal-Organic Framework

Metal-organic frameworks (MOFs) as a promising platform for electrocatalytic CO2 conversion are still restricted by the low efficiency or unsatisfied selectivity for desired products. Herein, zirconium-based porphyrinic MOF hollow nanotubes with Cd sites (Cd-PCN-222HTs) are reported for electrocatalytic CO2 -to-CO conversion. The dispersed Cd species are anchored in PCN-222HTs and coordinated by N atoms of porphyrin structures. It is discovered that Cd-PCN-222HTs have glorious electrocatalytic activity for selective CO production in ionic liquid-water (H2 O)-acetonitrile (MeCN) electrolyte. The CO Faradaic efficiency (FECO ) of >80% could be maintained in a wide potential range from -2.0 to -2.4 V versus Ag/Ag+ , and the maximum current density could reach 68.0 mA cm-2 at -2.4 V versus Ag/Ag+ with a satisfied turnover frequency of 26 220 h-1 . The enhanced efficiency of electrocatalytic CO2 conversion of Cd-PCN-222HTs is closely related to its hollow structure, anchored Cd species, and good synergistic effect with electrolyte. The density functional theory calculations indicate that the dispersed Cd sites anchored in PCN-222HTs not only favor the formation of *COOH intermediate but also hinder the hydrogen evolution reaction, resulting in high activity of electrocatalytic CO2 -to-CO conversion.

Monitoring Photoinduced Interparticle Chemical Communication In Situ

Monitoring interparticle chemical communication plays a critical role in the nanomaterial synthesis as this communication controls the final structure and stability of global nanoparticles (NPs). Yet most ensemble analytical techniques, which could only reveal average macroscopic information, are unable to elucidate NP-to-NP interactions. Herein, we employ stochastic collision electrochemistry to track the morphology transformation of Ag NPs in photochemical process at the single NP level. By further statistical analysis of time-resolved current transients, we quantitatively determine the dynamic chemical potential difference and interparticle communication between populations of large and small Ag NPs. The high sensitivity of stochastic collision electrochemistry enables the in situ investigation of chemical communication-dependent transformation kinetics of NPs in photochemical process, shedding light on designing nanomaterials.

Ethanol Electrooxidation at 1-2 nm AuPd Nanoparticles

We report a systematic study of the electrocatalytic properties and stability of a series of 1-2 nm Au, Pd, and AuPd alloy nanoparticles (NPs) for the ethanol oxidation reaction (EOR). Following EOR electrocatalysis, NP sizes and compositions were characterized using aberration-corrected scanning transmission electron microscopy (ac-STEM) and energy dispersive spectroscopy (EDS). Two main findings emerge from this study. First, alloyed AuPd NPs exhibit enhanced electrocatalytic EOR activity compared to either monometallic Au or Pd NPs. Specifically, NPs having a 3:1 ratio of Au:Pd exhibit an ~8-fold increase in peak current density compared to Pd NPs, with an onset potential shifted ~200 mV more to the negative compared to Au NPs. Second, the size and composition of AuPd alloy NPs do not (within experimental error) change following 1.0 or 2.0 h chronoamperometry experiments, while monometallic Au NPs increase in size from 2 to 5 nm under the same conditions. Notably, this report demonstrates the importance of post-catalytic ac-STEM/EDS characterization for fully evaluating NP activity and stability, especially for 1-2 nm NPs that may change in size or structure during electrocatalysis.

Alloying strategies for tuning product selectivity during electrochemical CO2 reduction over Cu

Excessive reliance on fossil fuels has led to the release and accumulation of large quantities of CO₂ into the atmosphere which has raised serious concerns related to environmental pollution and global warming. One way to mitigate this problem is to electrochemically recycle CO₂ to value-added chemicals or fuels using electricity from renewable energy sources. Cu is the only metallic electrocatalyst that has been shown to produce a wide range of industrially important chemicals at appreciable rates. However, low product selectivity is a fundamental issue limiting commercial applications of electrochemical CO₂ reduction over Cu catalysts. Combining copper with other metals that actively contribute to the electrochemical CO₂ reduction reaction process can selectively facilitate generation of desirable products. Alloying Cu can alter surface binding strength through electronic and geometric effects, enhancing the availability of surface confined carbon species, and stabilising key reduction intermediates. As a result, significant research has been undertaken to design and fabricate copper-based alloy catalysts with structures that can enhance the selectivity of targeted products. In this article, progress with use of alloying strategies for development of Cu-alloy catalysts are reviewed. Challenges in achieving high selectivity and possible future directions for development of new copper-based alloy catalysts are considered.

Single atoms and small clusters of atoms may accompany Au and Pd dendrimer-encapsulated nanoparticles

We report the presence of small clusters of atoms (<1 nm) (SCs) and single atoms (SAs) in solutions containing 1-2 nm dendrimer-encapsulated nanoparticles (DENs). Au and Pd DENs were imaged using aberration-corrected scanning transmission electron microscopy (ac-STEM), and energy dispersive spectroscopy (EDS) was used to identify and quantify the SAs/SCs. Two main findings have emerged from this work. First, the presence or absence of SAs/SCs depends on both the terminal functional group of the dendrimer (-NH₂ or -OH) and the elemental composition of the DENs (Au or Pd). Second, dialysis can be used to remove the majority of SAs/SCs in cases where a high density of SAs/SCs are present. The foregoing conclusions provide insights into the mechanisms for Au and Pd DEN synthesis and stability. Ultimately, these results demonstrate the need for careful characterization of systems containing nanoparticles to ensure that SAs/SCs, which may be below the detection limit of most analytical methods, are taken into consideration (especially for catalysis experiments).

The Factors Dictating Properties of Atomically Precise Metal Nanocluster Electrocatalysts

Metal nanoparticles occupy an important position in electrocatalysis. Unfortunately, by using conventional synthetic methodology, it is a great challenge to realize the monodisperse composition/structure of metal nanoparticles at the atomic level, and to establish correlations between the catalytic properties and the structure of individual catalyst particles. For the study of well-defined nanocatalysts, great advances have been made for the successful synthesis of nanoparticles with atomic precision, notably ligand-passivated metal nanoclusters. Such well-defined metal nanoclusters have become a type of model catalyst and have shown great potential in catalysis research. In this review, the authors summarize the advances in the utilization of atomically precise metal nanoclusters for electrocatalysis. In particular, the factors (e.g., size, metal doping/alloying, ligand engineering, support materials as well as charge state of clusters) affecting selectivity and activity of catalysts are highlighted. The authors aim to provide insightful guidelines for the rational design of electrocatalysts with high performance and perspectives on potential challenges and opportunities in this emerging field.

Electrochemical Surface Area Quantification, CO2 Reduction Performance, and Stability Studies of Unsupported Three-Dimensional Au Aerogels versus Carbon-Supported Au Nanoparticles

The efficient scale-up of CO₂-reduction technologies is a pivotal step to facilitate intermittent energy storage and for closing the carbon cycle. However, there is a need to minimize the occurrence of undesirable side reactions like H₂ evolution and achieve selective production of value-added CO₂-reduction products (CO and HCOO^-) at as-high-as-possible current densities. Employing novel electrocatalysts such as unsupported metal aerogels, which possess a highly porous three-dimensional nanostructure, offers a plausible approach to realize this. In this study, we first quantify the electrochemical surface area of an Au aerogel (≈5 nm in web thickness) using the surface oxide-reduction and copper underpotential deposition methods. Subsequently, the aerogel is tested for its CO₂-reduction performance in an in-house developed, two-compartment electrochemical cell. For comparison purposes, similar measurements are also performed on polycrystalline Au and a commercial catalyst consisting of Au nanoparticles supported on carbon black (Au/C). The Au aerogel exhibits a faradaic efficiency of ≈97% for CO production at ≈-0.48 V_RHE, with a suppression of H₂ production compared to Au/C that we ascribe to its larger Au-particle size. Finally, identical-location transmission electron microscopy of both nanomaterials before and after CO₂-reduction reveals that, unlike Au/C, the aerogel network retains its nanoarchitecture at the potential of peak CO production.

Electroreduction of CO2 with Tunable Selectivity on Au-Pd Bimetallic Catalyst: A First Principle Study

The electroreduction of CO₂ exhibits great promise in mitigating CO₂ from the atmosphere. However, it is quite challenging to produce C₁ products selectively on metal surfaces due to inefficient binding of CO with a metal surface. Here, using density functional theory, we studied an experimentally viable system of gold alloyed with a high CO-binding metal palladium. It is observed that the selectivity toward formic acid and methane can be tuned on Au-Pd bimetallic catalysts. Pd-rich alloy surfaces such as Pd deposited on the (211) surface of Au (Pd@Au) are found to be highly selective toward formic acid with an ultralow limiting potential of -0.23 V vs SHE. Interestingly, as the surface of the alloy become Au-rich, the selectivity toward methane increases. Among all the Au-Pd bimetallic systems, the Au-rich (211) surface of Au₃Pd alloy has a very low limiting potential of -0.9 V vs SHE for CO₂ electroreduction to methane. The selectivity toward methane on this surface is enhanced due to its optimum CO* binding and the ease of CO* protonation to CHO*. The higher feasibility of CO* protonation is a result of the stabilization of adsorbed CHO*. This stabilization is attributed to the interaction of both C and O of the CHO* molecule with the surface Au and Pd. It is found that the selectivity of a catalyst depends upon the stability of various intermediates, which can be regulated by modifying the composition of Au and Pd in the alloy. The results presented here demonstrate broad opportunities to tune the selectivity of the catalyst with varying alloy compositions, which will help to develop novel catalysts for CO₂ electroreduction.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

In Situ/Operando Insights into the Stability and Degradation Mechanisms of Heterogeneous Electrocatalysts

The further commercialization of renewable energy conversion and storage technologies requires heterogeneous electrocatalysts that meet the exacting durability target. Studies of the stability and degradation mechanisms of electrocatalysts are expected to provide important breakthroughs in stability issues. Accessible in situ/operando techniques performed under realistic reaction conditions are therefore urgently needed to reveal the nature of active center structures and establish links between the structural motifs in a catalyst and its stability properties. This review highlights recent research advances regarding in situ/operando techniques and improves the understanding of the stabilities of advanced heterogeneous electrocatalysts used in a diverse range of electrochemical reactions; it also proposes some degradation mechanisms. The review concludes by offering suggestions for future research.

Recent Progress on Polyvinyl Alcohol-Based Materials for Energy Conversion

Electrocatalytic energy conversion shows a promising “bridge” to mitigate energy shortage issues and minimizes the ecological implications by synergy with the sustainable energy sources, which calls for low-cost, highly active,...

Advances and Challenges for the Electrochemical Reduction of CO2 to CO: From Fundamentals to Industrialization

The electrochemical carbon dioxide reduction reaction (CO₂ RR) provides an attractive approach to convert renewable electricity into fuels and feedstocks in the form of chemical bonds. Among the different CO₂ RR pathways, the conversion of CO₂ into CO is considered one of the most promising candidate reactions because of its high technological and economic feasibility. Integrating catalyst and electrolyte design with an understanding of the catalytic mechanism will yield scientific insights and promote this technology towards industrial implementation. Herein, we give an overview of recent advances and challenges for the selective conversion of CO₂ into CO. Multidimensional catalyst and electrolyte engineering for the CO₂ RR are also summarized. Furthermore, recent studies on the large-scale production of CO are highlighted to facilitate industrialization of the electrochemical reduction of CO₂ . To conclude, the remaining technological challenges and future directions for the industrial application of the CO₂ RR to generate CO are highlighted.

Effect of Metal Nanoparticle Aggregate Structure on the Thermodynamics of Oxidative Dissolution

Here, we compare the electrochemical oxidation potential of 15 nm diameter citrate-stabilized Au NPs aggregated by acid (low pH) to those aggregated by tetrakis(hydroxymethyl) phosphonium chloride (THPC). For acid-induced aggregation, the solution changes to a blue-violet color, the localized surface plasmon resonance (LSPR) band of Au NPs at 520 nm decreases along with an increase in absorbance at higher wavelengths (600-800 nm), and the peak oxidation potential (E_p) in anodic stripping voltammetry (ASV) obtained in bromide has a positive shift by as large as 200 mV. For THPC-induced aggregation (Au/THPC mole ratio = 62.5), the solution changes to a blue color as the LSPR band at 520 nm decreases and a new distinct peak at 700 nm appears, but the E_p does not exhibit a positive shift. Scanning transmission electron microscopy (STEM) images reveal that acid-induced aggregates are three-dimensional with strongly fused Au NP-Au NP contacts, while THPC-induced aggregates are linear or two-dimensional with ∼1 nm separation between Au NPs. The surface area-to-volume ratio (SA/V) decreases for acid-aggregated Au NPs due to strong Au NP-Au NP contacts, which leads to lower surface free energy and a higher E_p. The SA/V does not change for THPC-aggregated Au NPs since space remains between them and their SA is fully accessible. These findings show that metal NP oxidative stability, as determined by ASV, is highly sensitive to the details of the aggregate structure.

Enhancing the CO2-to-CO Conversion from 2D Silver Nanoprisms via Superstructure Assembly

The electrochemical reduction of CO₂ in a highly selective and efficient manner is a crucial step toward its reuse for the production of chemicals and fuels. Nanostructured Ag catalysts have been found to be effective candidates for the conversion of CO₂-to-CO. However, the ambiguous determination of the intrinsic CO₂ activity and the maximization of the density of exposed active sites have greatly limited the use of Ag toward the realization of practical electrocatalytic devices. Here, we report a superstructure design strategy prepared by the self-assembly of two-dimensional Ag nanoprisms for maximizing the exposure of active edge ribs. The vertically stacked Ag nanoprisms allow the exposure of >95% of the edge sites, resulting in an enhanced selectivity and activity toward the production of CO from CO₂ with an overpotential of 152 mV. The Ag superstructures also demonstrate a selectivity of over 90% for 100 h together with a current retention of ≈94% at -600 mV versus the reversible hydrogen electrode and a partial energy efficiency for CO production of 70.5%. Our electrochemical measurements on individual Ag nanoprisms with various edge-to-basal plane ratios and the Ag superstructures led to the identification of the edge ribs as the active sites thanks to the ≈400 mV decrease in the onset potential compared to that of the Ag (111) basal planes and a turnover frequency of 9.2 × 10^-3 ± 1.9 × 10^-3 s^-1 at 0 V overpotential.

Electrochemical reduction of CO2 towards multi-carbon products via a two-step process

The two-step electroreduction of CO₂ to multi-carbon products with a high selectivity and production rate of industrial relevance provides an alternative route for converting CO₂ to fuels and chemicals.

Effect of surface ligands on gold nanocatalysts for CO2 reduction

Nanoparticle catalysts display optimal mass activity due to their high surface to volume ratio and tunable size and structure. However, control of nanoparticle size requires the presence of surface ligands, which significantly influence catalytic performance. In this work, we investigate the effect of dodecanethiol on the activity, selectivity, and stability of Au nanoparticles for electrochemical carbon dioxide reduction (CO2R). Results show that dodecanethiol on Au nanoparticles significantly enhances selectivity and stability with minimal loss in activity by acting as a CO2-permeable membrane, which blocks the deposition of metal ions that are otherwise responsible for rapid deactivation. Although dodecanethiol occupies 90% or more of the electrochemical active surface area, it has a negligible effect on the partial current density to CO, indicating that it specifically does not block the active sites responsible for CO2R. Further, by preventing trace ion deposition, dodecanethiol stabilizes CO production on Au nanoparticles under conditions where CO2R selectivity on polycrystalline Au rapidly decays to zero. Comparison with other surface ligands and nanoparticles shows that this effect is specific to both the chemical identity and the surface structure of the dodecanethiol monolayer. To demonstrate the potential of this catalyst, CO2R was performed in electrolyte prepared from ambient river water, and dodecanethiol-capped Au nanoparticles produce more than 100 times higher CO yield compared to clean polycrystalline Au at identical potential and similar current.

Controllable syngas production on gold nanowires/nickel foam electrode in non-aqueous system

A hierarchical electrode is prepared with Au nanowires grown on nickel foam. With large specific active surface area, it is used for producing syngas (H₂/CO) with controllable ratio, through electrochemical process in DMF. The synthetic innovation lies in the use of 3-cyanopropyltriethoxysilane, to achieve the adsorption of appropriate amount of Au seeds for the one-dimensional growth of ultrathin Au nanowires (d ≈ 5 nm). With the nanowires forest on the three-dimensional porous nickel foam substrate, syngas is produced by electro-catalysis with high overall Faradic efficiency and tunable H₂/CO ratios. This synthetic strategy opens a facile way to synthesize the hierarchical nanostructured materials, and broaden the choice of the catalysts for electrochemical applications.

A Self-Assembled CO2 Reduction Electrocatalyst: Posy-Bouquet-Shaped Gold-Polyaniline Core-Shell Nanocomposite

Here it was demonstrated that the decoration of gold (Au) with polyaniline is an effective approach in increasing its electrocatalytic reduction of CO₂ to CO. The core-shell-structured gold-polyaniline (Au-PANI) nanocomposite delivered a CO₂ -to-CO conversion efficiency of 85 % with a high current density of 11.6 mA cm^-2 . The polyaniline shell facilitated CO₂ adsorption, and the subsequent formation of reaction intermediates on the gold core contributed to the high efficiency observed.

Reorganization of Interfacial Water by an Amphiphilic Cationic Surfactant Promotes CO2 Reduction

The presence of cetyltrimethylammonium bromide (CTAB) near the surface of a Cu electrode promotes the electrochemical reduction of CO₂ to fuels. CTAB increases the CO₂ reduction rate by as much as 10× and decreased the HER rate by 4×, leading to ∼75% selectivity toward the reduction of CO₂. Surface enhanced infrared absorption spectroscopy (SEIRAS) was used to probe the effects of CTAB adsorption on the structure of interfacial water and CO₂ reduction intermediates. HER suppression was found to arise from the displacement of interfacial water molecules from CTAB adsorption within the double layer. The enhanced CO₂ reduction rate can be correlated to an increased population of atop-bound CO and the emergence of a low frequency atop-CO band. These results unravel the role of additives in improving CO₂-to-fuels electrocatalysis and establishing this as a powerful methodology for directing product selectivity.

From low to high-index facets of noble metal nanocrystals: a way forward to enhance the performance of electrochemical CO2 reduction

To date, noble metal nanoparticles, mainly the gold (Au) and silver (Ag) nanoparticles, are the most active and selective heterogeneous catalysts that have revealed a tendency to form CO and directly synthesize syngas as a result of the electrochemical CO2 reduction reaction (CO2RR). The CO2RR activity and selectivity are influenced by a wide range of factors, such as morphology, surface structure, shape, composition, type of electrolyte used, and pH. Most of these issues have been reviewed and evaluated critically. Herein, the CO2RR activity and selectivity to CO formation on the low and high-index facets of Au, Ag, and Pt NCs were evaluated with a greater motive to provide new insights into the field. The author refers to different experimental approaches and the corresponding theoretical methods that have been employed to study the product formation activity and selectivity on low and high-index facet noble metal NCs for the CO2RR. In conclusion, some perspectives have been provided on the future research of the low and high-index facets of noble metal NCs for CO2 reduction.

Synthesis of lead-free Cs3Sb2Br9 perovskite alternative nanocrystals with enhanced photocatalytic CO2 reduction activity

A synthetic method for uniform and pure Cs3Sb2Br9 NCs has been developed. Cs3Sb2Br9 NCs exhibit a 10-fold increase in activity for the photocatalytic CO2 reduction reaction compared to CsPbBr3 NCs, achieving 510 μmol CO g-1 cat. after 4 h. Density functional theory shows that Cs3Sb2Br9 surfaces sufficiently expose Sb to allow reactivity, as opposed to the unreactive CsPbBr3 surface.

The role of adsorbed oleylamine on gold catalysts during synthesis for highly selective electrocatalytic reduction of CO2 to CO

Adsorbed oleylamine on Au NP surfaces during preparation can efficiently enhance electrocatalysis of CO₂ to CO and inhibit the hydrogen evolution reaction.

Transition metal-based catalysts for the electrochemical CO2 reduction: from atoms and molecules to nanostructured materials

An overview of the main strategies for the rational design of transition metal-based catalysts for the electrochemical conversion of CO₂, ranging from molecular systems to single-atom and nanostructured catalysts.

Effect of Size, Coverage, and Dispersity on the Potential-Controlled Ostwald Ripening of Metal Nanoparticles

Here, we describe the size-dependent, electrochemically controlled Ostwald ripening of 1.6, 4, and 15 nm-diameter Au nanoparticles (NPs) attached to (3-aminopropyl)triethoxysilane (APTES)-modified glass/indium-tin-oxide electrodes. Holding the Au NP-coated electrodes at a constant negative potential of the dissolution potential in a bromide-containing electrolyte led to electrochemical Ostwald ripening of the different-sized Au NPs. The relative increase in the diameter of the NPs (D_final/D_initial) during electrochemical Ostwald ripening increases with decreasing NP size, increasing applied potential, increasing NP population size dispersity, and increasing NP coverage on the electrodes. Monitoring the average size of the Au NPs as a function of time at a controlled potential allows the measurement of the Ostwald ripening rate. Anodic stripping voltammetry and electrochemical determination of the surface area-to-volume ratio provide fast and convenient size analysis for many different samples and conditions, with consistent sizes from scanning electron microscopy images for some samples. It is important to better understand electrochemical Ostwald ripening, especially under potential control, since it is a major process that occurs during the synthesis of metal NPs and leads to detrimental size instability during electrochemical applications.

Nano-folded Gold Catalysts for Electroreduction of Carbon Dioxide

The local structure and geometry of catalytic interfaces can influence the selectivity of chemical reactions. Selectivity is often critical for the practical realization of reactions such as the electroreduction of carbon dioxide (CO₂). Previously developed strategies to manipulate the structure and geometry of catalysts for electroreduction of CO₂ involve complex processes or fail to efficiently alter the selectivity. Here, using a prestrained polymer, we uniaxially and biaxially compress a 60 nm gold film to form a nano-folded electrocatalyst for CO₂ reduction. We observe two kinds of folds and can tune the ratio of loose to tight folds by varying the extent of prestrain in the polymer. We characterize the nano-folded catalysts using X-ray diffraction, scanning, and transmission electron microscopy. We observe grain reorientation and coarsening in the nano-folded gold catalysts. We measure an enhancement of Faradaic efficiency for carbon monoxide formation with the biaxially compressed nano-folded catalyst by a factor of about nine as compared to the flat catalyst (up to 87.4%). We rationalize this observation by noting that an increase of the local pH in the tight folds of the catalyst outweighs the effects of alterations in grain characteristics. Together, our studies demonstrate that nano-folded geometries can significantly alter grain characteristics, mass transport, and catalytic performance.