Redox-Based Photostabilizing Agents in Fluorescence Imaging: The Hidden Role of Intersystem Crossing in Geminate Radical Ion Pairs

Molecular Insights into the Quenching Mechanism of the Triplet Excited State of Rose Bengal through Oxidative and Reductive Organic Compounds

In oxygenated aquatic environments, the predominant scavenging of the triplet excited state of chromophoric dissolved organic matter (3CDOM*) involves dissolved ground-state oxygen, diverting attention away from the scavenging mechanisms of 3CDOM* mediated through specific organic compounds. Previous studies demonstrated that model 3CDOM* exhibited quantum yields (i.e., 1-56%) in the formation of radical ions, resulting from the competition between physical and chemical quenching through a common exciplex intermediate. Physical quenching was rationalized through the reverse intersystem crossing of the exciplex, followed by back electron transfer, yielding ground-state reactants. Despite this, direct experimental evidence for exciplex involvement has been elusive, owing to detection challenges. Herein, employing density functional theory (DFT) and time-dependent DFT specifically for excited state surrogate CDOM and organic scavengers, we unveil, for the first time, the underlying mechanisms responsible for the quenching of Rose Bengal through oxidative and reductive scavengers. Our computational findings provide evidence for the involvement of exciplexes during the quenching process of the excited triplet state of Rose Bengal, highlighting the impact of electronic coupling between Rose Bengal and quenchers on the quantum yield for radical ion formation.

Automated Synthesis of DNA Nanostructures

DNA nanotechnology has revolutionized the ability to position matter at the nanoscale, but the preparation of DNA-based architectures remains laborious. To facilitate the formation of custom structures, a fully automated method is reported to produce sequence- and size-defined DNA nanotubes. By programming the sequential addition of desired building blocks, rigid DX-tile-based DNA nanotubes and flexible wireframe DNA structures are attained, where the total number of possible constructs increases as a power function of the number of different units available. Using single-molecule fluorescence imaging, the kinetics and yield of each synthetic step can be quantitatively determined, revealing differences in self-assembly dynamics as the nanotube is built up from the solid support and providing new insights into DNA self-assembly. The exploitation of automation for both assembly and analysis (through an ad-hoc developed K-means clustering algorithm) facilitates a workflow wherein the synthesis parameters may be iteratively improved upon, demonstrating how a single-molecule "assembly-analysis-optimization" sequence can be used to generate complex, noncovalent materials in good yield. The presented synthetic strategy is generalizable, making use of equipment already available in most standard laboratories and represents the first fully automated supramolecular assembly on a solid support.

Lumos maxima - How robust fluorophores resist photobleaching?

Fluorescent dyes synergize with advanced microscopy for researchers to investigate the location and dynamic processes of biomacromolecules with high spatial and temporal resolution. However, the instability of fluorescent dyes, including photobleaching and photoconversion, represent fundamental limits for super-resolution and time-lapse imaging. In this review, we discuss the latest advances in improving the photostability of fluorescent dyes. We summarize the primary photobleaching processes of cyanine and rhodamine dyes and highlight a range of strategies developed in recent years to strengthen these fluorophores. Additionally, we discuss the influence of protein microenvironments and labeling methods on the photostability of fluorophores. We aim to inspire next-generation robust and bright fluorophores that ultimately enable the routine practice of time-lapse super-resolution imaging of live cells.

A FRET-Based Assay and Computational Tools to Quantify Enzymatic Rates and Explore the Mechanisms of RNA Deadenylases in Heterogeneous Environments

We developed a medium-throughput assay that can measure the time-dependent distribution of RNA products generated as a deadenylase degrades a polyadenosine (poly(A)) RNA tract, thereby providing insight into the mechanism of deadenylation. Importantly, this assay can be performed in both homogeneous and heterogeneous environments without relying on gel electrophoresis of RNA products or coupled enzymatic reactions that indirectly report on the RNA distribution through the detection of freed adenosine monophosphate. In parallel, we have established an open-source, Python-based command-line software package, deadenylationkinetics, that can be used to numerically simulate and/or fit the datasets afforded by our assay with different deadenylation mechanisms to determine the most likely case and estimate the associated rate constants. In this chapter, we detail the implementation of our method and the quantification of poly(A) RNA binding and degradation kinetics in application to a truncated version of CNOT7 from the CCR4-NOT deadenylation complex, which serves as a model deadenylase with enhanced activity.

Xanthene, cyanine, oxazine and BODIPY: the four pillars of the fluorophore empire for super-resolution bioimaging

In the realm of biological research, the invention of super-resolution microscopy (SRM) has enabled the visualization of ultrafine sub-cellular structures and their functions in live cells at the nano-scale level, beyond the diffraction limit, which has opened up a new window for advanced biomedical studies to unravel the complex unknown details of physiological disorders at the sub-cellular level with unprecedented resolution and clarity. However, most of the SRM techniques are highly reliant on the personalized special photophysical features of the fluorophores. In recent times, there has been an unprecedented surge in the development of robust new fluorophore systems with personalized features for various super-resolution imaging techniques. To date, xanthene, cyanine, oxazine and BODIPY cores have been authoritatively utilized as the basic fluorophore units in most of the small-molecule-based organic fluorescent probe designing strategies for SRM owing to their excellent photophysical characteristics and easy synthetic acquiescence. Since the future of next-generation SRM studies will be decided by the availability of advanced fluorescent probes and these four fluorescent building blocks will play an important role in progressive new fluorophore design, there is an urgent need to review the recent advancements in designing fluorophores for different SRM methods based on these fluorescent dye cores. This review article not only includes a comprehensive discussion about the recent developments in designing fluorescent probes for various SRM techniques based on these four important fluorophore building blocks with special emphasis on their effective integration into live cell super-resolution bio-imaging applications but also critically evaluates the background of each of the fluorescent dye cores to highlight their merits and demerits towards developing newer fluorescent probes for SRM.

Superior Photoprotection of Cyanine Dyes with Thio-imidazole Amino Acids

Preventing fluorophore photobleaching and unwanted blinking is crucial for single-molecule fluorescence (SMF) studies. Reductants achieve photoprotection via quenching excited triplet states, yet either require counteragents or, for popular alkyl-thiols, are limited to cyanine dye Cy3 protection. Here, we provide mechanistic and imaging results showing that the naturally occurring amino acid ergothioneine and its analogue dramatically enhance photostability for Cy3, Cy5, and their conformationally restrained congeners, providing a biocompatible universal solution for demanding fluorescence imaging.

Leveraging Baird aromaticity for advancement of bioimaging applications

In this perspective, we highlight the recent progress in utilizing Baird aromatic species to improve fluorophore performance in microscopy and imaging applications. We specifically focus on the origins of the use of Baird aromaticity in fluorescence applications, the development of “self‐healing” fluorophores leveraging cyclooctatetraene’ Baird aromaticity, and where developments need to occur to optimize this technology.

Characterization of Fluorescent Proteins with Intramolecular Photostabilization*

Genetically encodable fluorescent proteins have revolutionized biological imaging in vivo and in vitro. Despite their importance, their photophysical properties, i. e., brightness, count-rate and photostability, are relatively poor compared to synthetic organic fluorophores or quantum dots. Intramolecular photostabilizers were recently rediscovered as an effective approach to improve photophysical properties of organic fluorophores. Here, direct conjugation of triplet-state quenchers or redox-active substances creates high local concentrations of photostabilizer around the fluorophore. In this paper, we screen for effects of covalently linked photostabilizers on fluorescent proteins. We produced a double cysteine mutant (A206C/L221C) of α-GFP for attachment of photostabilizer-maleimides on the β-barrel near the chromophore. Whereas labelling with photostabilizers such as trolox, a nitrophenyl group, and cyclooctatetraene, which are often used for organic fluorophores, had no effect on α-GFP-photostability, a substantial increase of photostability was found upon conjugation to azobenzene. Although the mechanism of the photostabilizing effects remains to be elucidated, we speculate that the higher triplet-energy of azobenzene might be crucial for triplet-quenching of fluorophores in the blue spectral range. Our study paves the way for the development of fluorescent proteins with photostabilizers in the protein barrel by methods such as unnatural amino acid incorporation.

Metal Modulation: An Easy-to-Implement Tactic for Tuning Lanthanide Phototheranostics

Phototheranostics constitute an emerging cancer treatment wherein the core diagnostic and therapeutic functions are integrated into a single photosensitizer (PS). Achieving the full potential of this modality requires being able to tune the photosensitizing properties of the PS in question. Structural modification of the organic framework represents a time-honored strategy for tuning the photophysical features of a given PS system. Here we report an easy-to-implement metal selection approach that allows for fine-tuning of excited-state energy dissipation and phototheranostics functions as exemplified by a set of lanthanide (Ln = Gd, Yb, Er) carbazole-containing porphyrinoid complexes. Femto- and nanosecond time-resolved spectroscopic studies, in conjunction with density functional theory calculations, revealed that the energy dissipation pathways for this set of PSs are highly dependent on the energy gap between the lowest triplet excited state of the ligand and the excited states of the coordinated Ln ions. The Yb complex displayed a balance of deactivation mechanisms that made it attractive as a potential combined photoacoustic imaging and photothermal/photodynamic therapy agent. It was encapsulated into mesoporous silica nanoparticles (MSN) to provide a biocompatible construct, YbL@MSN, which displays a high photothermal conversion efficiency (η = 45%) and a decent singlet oxygen quantum yield (Φ_Δ = 31%). Mouse model studies revealed that YbL@MSN allows for both photoacoustic imaging and synergistic photothermal- and photodynamic-therapy-based tumor reduction in vivo. Our results lead us to suggest that metal selection represents a promising approach to fine-tuning the excited state properties and functional features of phototheranostics.

Substituent screening effect on single-molecule photostability: comparison of three differently substituted porphycenes

Photobleaching of single molecules has been studied using confocal fluorescence microscopy for porphycene, a porphyrin isomer, and its two derivatives. Fourfold substitution of porphycene with bulkytert-butyl groups leads to the enhancement of photostability, even though the spectral, photophysical, and redox parameters remain similar. We attribute this effect to the increase of the efficiency of physical quenching of the chromophore triplet state by oxygen, compared with the yield of chemical reaction that leads to photobleaching. Analysis of the observed photon fluxes from single emitters embedded in a polymer film shows that the experiment based on fluorescence is biased towards detection of molecules which have oxygen-the triplet quencher-in their vicinity. The distribution of the measured photodegradation quantum yields is very heterogeneous, suggesting that physical and chemical quenching rates exhibit different distance and orientation dependences.

Harnessing Hypoxia-Dependent Cyanine Photocages for In Vivo Precision Drug Release

Photocaging holds promise for the precise manipulation of biological events in space and time. However, current near-infrared (NIR) photocages are oxygen-dependent for their photolysis and lack of timely feedback regulation, which has proven to be the major bottleneck for targeted therapy. Herein, we present a hypoxia-dependent photo-activation mechanism of dialkylamine-substituted cyanine (Cy-NH) accompanied by emissive fragments generation, which was validated with retrosynthesis and spectral analysis. For the first time, we have realized the orthogonal manipulation of this hypoxia-dependent photocaging and dual-modal optical signals in living cells and tumor-bearing mice, making a breakthrough in the direct spatiotemporal control and in vivo feedback regulation. This unique photoactivation mechanism overcomes the limitation of hypoxia, which allows site-specific remote control for targeted therapy, and expands the photo-trigger toolbox for on-demand drug release, especially in a physiological context with dual-mode optical imaging under hypoxia.

Facile Synthesis, Enhanced Photostability, and Long-term Cellular Imaging of Bright Red Luminescent Organosilica Nanoparticles

We herein demonstrate a facile approach for the preparation of red luminescent organosilica nanoparticles (OSi NPs) via the addition reaction of indocyanine green (ICG) and (3-aminopropyl)trimethoxysilane (APTMS). Photoluminescent quantum yield (PLQY) of the resulting OSi NPs was tunable by simply changing the molar ratio of ICG and APTMS used in the reactions. Under the optimized molar ratio of ICG and APTMS, that is, 1:4, PLQY of the red luminescent OSi NPs was as high as 32%. The resulting OSi NPs presented greatly enhanced photostability, attributing to the promoted decay rate of the excited state and thus suppressed the generation of the reactive oxygen species in the OSi NPs. The integrated superiorities of high PLQY, enhanced photostability, low toxicity, and excellent biocompatibility endow the red luminescent OSi NPs extremely promising for long-term cellular imaging.

Unifying Mechanism for Thiol-Induced Photoswitching and Photostability of Cyanine Dyes

Cyanines (Cy3, Cy5, Cy3B) are the most utilized dyes for single-molecule fluorescence and localization-based super-resolution imaging. These modalities exploit cyanines' versatile photochemical behavior with thiols. A mechanism reconciling seemingly divergent results and enabling control over cyanine photoreactivity is however missing. Utilizing single-molecule fluorescence on Cy5 and Cy5B, transient-absorption spectroscopy, and DFT modeling on a range of cyanine dyes, herein we show that photoinduced electron transfer (PeT) from a thiolate to Cy in their triplet excited state and then triplet-to-singlet intersystem crossing in the nascent geminate radical pair are crucial steps. Next, a bifurcation occurs, yielding either back electron transfer and regeneration of ground state Cy, required for photostabilization, or Cy-thiol adduct formation, necessary for super-resolution microscopy. Cy regeneration via photoinduced thiol elimination is favored by adduct absorption spectra broadening. Elimination is also shown to occur through an acid-catalyzed reaction. Overall, our work provides a roadmap for designing fluorophores, photoswitching agents, and triplet excited state quenchers for single-molecule and super-resolution imaging.

Conformationally restrained pentamethine cyanines and use in reductive single molecule localization microscopy

Pentamethine cyanines are a class of far-red fluorophores that find extensive use in single-molecule localization microscopy (SMLM), as well as a broad range of other techniques. A drawback of this scaffold is its relatively low quantum yields, which is due to excited state deactivation via trans-to-cis chromophore isomerization. Here we describe a synthetic strategy to improve the photon output of these molecules. In the key synthetic transformation, a protected dialdehyde precursor undergoes a cascade reaction that forms a tetracyclic ring system. The resulting conformationally restrained analogs exhibit improved fluorescence quantum yield and extended fluorescence lifetimes. These properties, together with their ability to efficiently recover from hydride reduction, enable a uniquely simple form of single-molecule localization microscopy (SMLM).

Self-Healing Dyes-Keeping the Promise?

Self-healing dyes have emerged as a new promising class of fluorescent labels. They consist of two units, a fluorescent dye and a photostabilizer. The latter heals whenever the fluorescent dye is in danger of taking a reaction pathway toward photobleaching. We describe the underlying concepts and summarize the developmental history and state-of-the-art, including latest applications in high-resolution microscopy, live-cell, and single-molecule imaging. We further discuss remaining limitations, which are (i) lower photostabilization of most self-healing dyes when compared to solution additives, (ii) limited mechanistic understanding on the influence of the biochemical environment and molecular oxygen on self-healing, and (iii) the lack of cheap and facile bioconjugation strategies. Finally, we provide ideas on how to further advance self-healing dyes, show new data on redox blinking caused by double-stranded DNA, and highlight forthcoming work on intramolecular photostabilization of fluorescent proteins.

Photobleaching of organic fluorophores: quantitative characterization, mechanisms, protection

Photochemical stability is one of the most important parameters that determine the usefulness of organic dyes in different applications. This Review addresses key factors that determine the dye photostability. It is shown that photodegradation can follow different oxygen-dependent and oxygen-independent mechanisms and may involve both ¹S₁-³T₁ and higher-energy ¹S_n-³T_n excited states. Their involvement and contribution depends on dye structure, medium conditions, irradiation power. Fluorescein, rhodamine, BODIPY and cyanine dyes, as well as conjugated polymers are discussed as selected examples illustrating photobleaching mechanisms. The strategies for modulating and improving the photostability are overviewed. They include the improvement of fluorophore design, particularly by attaching protective and anti-fading groups, creating proper medium conditions in liquid, solid and nanoscale environments. The special conditions for biological labeling, sensing and imaging are outlined.

On the impact of competing intra- and intermolecular triplet-state quenching on photobleaching and photoswitching kinetics of organic fluorophores

While buffer cocktails remain the most commonly used method for photostabilization and photoswitching of fluorescent markers, intramolecular triplet-state quenchers emerge as an alternative strategy to impart fluorophores with 'self-healing' or even functional properties such as photoswitching. In this contribution, we evaluated combinations of both approaches and show that inter- and intramolecular triplet-state quenching processes compete with each other. We find that although the rate of triplet-state quenching is additive, the photostability is limited by the faster pathway. Often intramolecular processes dominate the photophysical situation for combinations of covalently-linked and solution-based photostabilizers and photoswitching agents. Furthermore we show that intramolecular photostabilizers can protect fluorophores from reversible off-switching events caused by solution-additives, which was previously misinterpreted as photobleaching. Our studies also provide practical guidance for usage of photostabilizer-dye conjugates for STORM-type super-resolution microscopy permitting the exploitation of their improved photophysics for increased spatio-temporal resolution. Finally, we provide evidence that the biochemical environment, e.g., proximity of aromatic amino-acids such as tryptophan, reduces the photostabilization efficiency of commonly used buffer cocktails. Not only have our results important implications for a deeper mechanistic understanding of self-healing dyes, but they will provide a general framework to select label positions for optimal and reproducible photostability or photoswitching kinetics in different biochemical environments.

Redefining the photo-stability of common fluorophores with triplet state quenchers: mechanistic insights and recent updates

Light microscopy can offer certain advantages over electron microscopy in terms of acquiring detailed insights into the biological/intra-cellular milieu. In recent years, with the development of new fluorescence imaging technologies, it has become extremely important to assess the role of designing appropriate fluorophores in acquiring desired biological information without encountering any untoward hitches. Over the years, external fluorophores have been prevalently used in fluorescence microscopy and single-molecule fluorescence microscopy-based studies. Photostable fluorogenic probes with high extinction coefficients and quantum yields, exhibiting minimum autofluorescence and photobleaching properties, are preferred in single-molecule microscopy as they can tolerate long-term laser exposure. Therefore, the development of triplet state quenchers and/or any other suitable new strategy to ensure the photo-stability of the fluorophores during long-term live cell imaging exercises is highly anticipated. In this feature article, various strategies for stabilizing fluorophores, including the mechanisms of TSQ-induced stabilization, have been thoroughly reviewed considering contemporary literature reports and applications.

Harnessing Cyanine Reactivity for Optical Imaging and Drug Delivery

Optical approaches that visualize and manipulate biological processes have transformed modern biomedical research. An enduring challenge is to translate these powerful methods into increasingly complex physiological settings. Longer wavelengths, typically in the near-infrared (NIR) range (∼650-900 nm), can enable advances in both fundamental and clinical settings; however, suitable probe molecules are needed. The pentamethine and heptamethine cyanines, led by prototypes Cy5 and Cy7, are among the most useful compounds for fluorescence-based applications, finding broad use in a range of contexts. The defining chemical feature of these molecules, and the key chromophoric element, is an odd-numbered polymethine that links two nitrogen atoms. Not only a light-harvesting functional group, the cyanine chromophore is subject to thermal and photochemical reactions that dramatically alter many properties of these molecules. This Account describes our recent studies to define and use intrinsic cyanine chromophore reactivity. The hypothesis driving this research is that novel chemistries that manipulate the cyanine chromophore can be used to address challenging problems in the areas of imaging and drug delivery. We first review reaction discovery efforts that seek to address two limitations of long-wavelength fluorophores: undesired thiol reactivity and modest fluorescence quantum yield. Heptamethine cyanines with an O-alkyl substituent at the central C4' carbon were prepared through a novel N- to O-transposition reaction. Unlike commonly used C4'-phenol variants, this new class of fluorophores is resistant to thiol modification and exhibits improved in vivo imaging properties when used as antibody tags. We have also developed a chemical strategy to enhance the quantum yield of far-red pentamethine cyanines. Using a synthetic strategy involving a cross metathesis/tetracyclization sequence, this approach conformationally restrains the pentamethine cyanine scaffold. The resulting molecules exhibit enhanced quantum yield (Φ_F = 0.69 vs Φ_F = 0.15). Furthermore, conformational restraint improves interconversion between reduced hydrocyanine and intact cyanine forms, which enables super resolution microscopy. This Account then highlights efforts to use cyanine photochemical reactivity for NIR photocaging. Our approach involves the deliberate use of cyanine photooxidation, a reaction previously only associated with photodegradation. The uncaging reaction sequence is initiated by photooxidative chromophore cleavage (using wavelengths of up to 780 nm), which prompts a C-N bond hydrolysis/cyclization sequence resulting in phenol liberation. This approach has been applied to generate the first NIR-activated antibody-drug conjugates. Tumor uptake can be monitored in vivo using NIR fluorescence, prior to uncaging with an external irradiation source. This NIR uncaging strategy can slow tumor progression and increase survival in a MDA-MB-468- luc mouse model. Broadly, the vantage point of cyanine reactivity is providing novel probe molecules with auspicious features for use in complex imaging and drug delivery settings.

Switchable Fluorophores for Single-Molecule Localization Microscopy

The past decade has witnessed an explosion in the use of super-resolution fluorescence microscopy methods in biology and other fields. Single-molecule localization microscopy (SMLM) is one of the most widespread of these methods and owes its success in large part to the ability to control the on-off state of fluorophores through various chemical, photochemical, or binding-unbinding mechanisms. We provide here a comprehensive overview of switchable fluorophores in SMLM including a detailed review of all major classes of SMLM fluorophores, and we also address strategies for labeling specimens, considerations for multichannel and live-cell imaging, potential pitfalls, and areas for future development.

Photocatalysis and self-catalyzed photobleaching with covalently-linked chromophore-quencher conjugates built around BOPHY

Two Chromophore-Quencher Conjugates (CQCs) have been synthesized by covalent attachment of the anti-oxidant dibutylated-hydroxytoluene (BHT) to a pyrrole-BF₂ chromophore (BOPHY) in an effort to protect the latter against photofading.