Why Do Simple Molecules with "Isolated" Phenyl Rings Emit Visible Light?

Polymerization-induced emission and selective detection to Fe3+/ Fe2+ of triazine-containing polyureas

In this study, four polyureas with triazine moiety (PUAs) were successfully synthesized through the polymerization of triazine-containing diamine and diisocyanate. The intramolecular aggregation of triazine rings and urea groups along the macromolecular backbone gives PUAs a significant polymerization-induced emission (PIE). Among the four PUAs, PUA-LP shows a significant fluorescent emission at 450 nm, compared to non/weak fluorescent 2,4-diamino-6-phenyl-1,3,5-triazine and L-Lysine diisocyanate ethyl ester monomers. Additionally, the external factors such as solution concentration, excitation wavelength, and precipitants also play a crucial role in the fluorescence of PUAs. As expected, PUA-LP can selectively recognize and detect Fe3+/Fe2+ ions even in the presence of 12 other metal ions and 10 anions. The limit of detection of PUA-LP to Fe3+/Fe2+ is as low as 1.02 μM (0.06 mg/L) and 0.86 μM (0.05 mg/L), respectively, and far below 0.3 mg/L of the allowable national standard for drinking water by WHO. Furthermore, the quenching mechanism of Fe3+/Fe2+ to PUA-LP is attributed to static quenching caused by the coordination of Fe3+/Fe2+ ions with a coordination ratio of 2:1. Based on PIE, the fluorescent PUA-LP was made into an observable and portable testing paper for detecting Fe3+/Fe2+ ions. Finally, we measured the recovery rate of the actual tap water samples and compared the performance of PIE-active PUA-LP with the other reported fluorescent probes to Fe3+/Fe2+ ions.

Synthesis of a novel twisted π-conjugated macrocycle via double Friedel-Crafts reaction and its physical properties

We synthesized a cyclic molecule from diarylalkynes and Meldrum's acid derivatives as the methylenation reagent via double Friedel-Crafts reaction. Single-crystal X-ray structure analysis confirmed the twisted structure of the molecule. We also investigated their physical properties and homoconjugation by UV-Vis, photoluminescence, DFT and TD-DFT calculations.

Eosin Y-catalyzed reductive homocoupling of para-quinone methides under visible-light

In this manuscript, we demonstrate a visible-light driven dimerization of para-quinone methides using eosin Y catalyst via a reductive homocoupling process. This mild and operationally simple methodology was found to be compatible with a variety of differently substituted para-quinone methides and a broad range of tetra-arylethane derivatives were obtained in moderate to good yields (47%-87%).

Aptamer and Thiol Co-Regulated Color-Shifting Fluorophores via Dynamic Through-Bond/Space Conjugation for Constructing Ratiometric RNA Sensor

Fluorophores with color-shifting characteristics have attracted enormous research interest in the quantitative application of RNA sensors. It reports here a simple synthesis, luminescent properties, and co-transcription ability of de-conjugated triphenylmethane leucomalachite green (LMG). This novel clusteroluminescence fluorophore is rapidly synthesized from malachite green (MG) in reductive transcription system containing dithiothreitol, emitting fluorescence in the UV region through space conjugation. The co-transcribed MG RNA aptamer (MGA) bound to the ligand, resulting in red fluorescence from the through-bond conjugation. Given the equilibrated color-shifting fluorophores, they are rationally employed in a 3WJ-based rolling circle transcription switch, with the target-aptamer acting as an activator to achieve steric allosterism. This one-pot system allows the target to compete continuously for allosteric sites, and the activated transcription switches continue to amplify MGA forward, achieving accurate Aflatoxin 1 quantification at the picomolar level in 1 h. Due to the programmability of this RNA sensor, the design method of target-competitive aptamers is standardized, making it universally applicable.

Near-Infrared Emission Beyond 900 nm from Stable Radicals in Nonconjugated Poly(diphenylmethane)

Organic radicals with narrow energy gaps are highly sought-after for the production of near-infrared (NIR) fluorophores. However, the current repertoire of developed organic radicals is notably limited, facing challenges related to stability and low fluorescence efficiency. This study addresses these limitations by achieving stable radicals in nonconjugated poly(diphenylmethane) (PDPM). Notably, PDPM exhibits a well-balanced structural flexibility and rigidity, resulting in a robust intra-/inter-chain through-space conjugation (TSC). The stable radicals within PDPM, coupled with strong TSC, yield a remarkable full-spectrum emission spanning from blue to NIR beyond 900 nm. This extensive tunability is achieved through careful adjustments of concentration and excitation wavelength. The findings highlight the efficacy of polymerization in stabilizing radicals and introduce a novel approach for developing nonconjugated NIR emitters based on triphenylmethane subunits.

Unravelling the Role of Structural Factors in the Luminescence Properties of Persulfurated Benzenes

Room temperature phosphorescence rarely occurs from pure organic molecules, especially in the solid-state. A strategy for the design of highly emissive organic phosphors is still hard to predict, thus impeding the development of new functional materials with the desired optical properties. Herein, we analyze a family of alkyl and aryl-substituted persulfurated benzenes, the latter representing a class of organic solid-state triplet emitters able to show very high emission quantum yield at room temperature. In this work, we correlate structural parameters with the photophysical properties observed in different experimental conditions (diluted solution, crystalline and amorphous phase at RT and low temperature). Our results, corroborated by a detailed computational analysis, indicate a close relationship between the luminescence properties and i) the nature of the substituents on the persulfurated core, ii) the adopted conformations in the solid state, both in crystalline and amorphous phases. These factors contribute to characterize the lowest-energy lying excited-state, its deactivation pathways, the phosphorescence lifetime and quantum yield. These findings provide a useful roadmap for the development of highly performing purely organic solid-state emitters based on the persulfurated benzene platform.

Cluster-Triggered Self-Luminescence, Rapid Self-Healing, and Adaptive Reprogramming Liquid Crystal Elastomers Enabled by Dynamic Imine Bond

The integration of advanced functions and diverse practical applications calls for multifunctional liquid crystal elastomers (LCEs); however, the structure-intrinsic luminescence and excellent mechanical properties of LCEs have not yet been explored. In this study, clusteroluminescence (CL)-based LCEs (CL-LCEs) are successfully fabricated without depending on large conjugated structures, thereby avoiding redundant organic synthesis and aggregation-caused quenching. The experimental and theoretical results reveal that secondary amine (-NH-) and imine (-C = N-) groups play vital roles in determining the presence of fluorescence in CL-LCEs. Based on the above observation, the strategy universalization and a molecular library for constructing CL-LCEs are further demonstrated. Meanwhile, the dynamic bond of imine bonds endows the CL-LCE system with rapid self-healing under mild conditions (70 °C in 10 min), excellent stretchability, and adaptive programmable characteristics. Furthermore, the self-luminescent performance enables visual detection of the self-healing process. Finally, CL-based information storage and anticounterfeiting are successfully realized and their applications in fiber actuators and fluorescent textiles are demonstrated. The distinctive luminescence and dynamic chemistry presented in this work has significant implications in elucidating the mechanism of CL and providing new strategies for the rational design of novel multifunctional LCE materials.

Chirality-Regulated Clusteroluminescence in Polypeptides

The low emission efficiency of clusteroluminogens restricts their practical applications in the fields of sensors and biological imaging. In this work, the clusteroluminescence of ordered/disordered polypeptides was observed, and the photoluminescence (PL) intensity of polypeptides can be modulated by the chirality of amino acid residues. Polyglutamates with different chiral compositions were synthesized, and the racemic polypeptides exhibited a significantly higher PL intensity than the enantiopure ones. This emission originates from the n-π* transition between C═O groups of polypeptides and is enhanced by clusterization of polypeptides. CD and Fourier transform infrared spectra demonstrated that the enantiopure and racemic polypeptides form α-helix and random coil structures, respectively. The disordered polypeptides can form more chain entanglements and interchain interactions because of their high flexibility, leading to more clusterizations and stronger PL intensity. The rigidity of ordered helical structures restrains the chain entanglements, and the formation of intrachain hydrogen bonds between amide groups of the backbone impairs the interchain interaction between polypeptides, resulting in lower PL intensity. The PL intensity of the polypeptides can also be manipulated by the addition of urea or trifluoroacetic acid. Our study not only elucidates the chirality/order-based structure-property relationship of clusteroluminescence in peptide-based polymers but also offers implications for the rational design of fluorescent peptides/proteins.

How the Length of Through-Space Conjugation Influences the Clusteroluminescence of Oligo(Phenylene Methylene)s

The length and mode of conjugation directly affect the molecular electronic structure, which has been extensively studied in through-bond conjugation (TBC) systems. Corresponding research greatly promotes the development of TBC-based luminophores. However, how the length and mode of through-space conjugation (TSC), one kind of weak interaction, influence the photophysical properties of non-conjugated luminophores remains a relatively unexplored field. Here, we unveil a non-linear relationship between TSC length and emission characteristics in non-conjugated systems, in contrast to the reported proportional correlation in TBC systems. More specifically, oligo(phenylene methylene)s (OPM[4]-OPM[7]) exhibit stronger TSC and prominent blue clusteroluminescence (CL) (≈440 nm) compared to shorter counterparts (OPM[2] and OPM[3]). OPM[6] demonstrates the highest solid-state quantum yield (40 %), emphasizing the importance of balancing flexibility and rigidity. Further theoretical calculations confirmed that CL of these oligo(phenylene methylene)s was determined by stable TSC derived from the inner rigid Diphenylmethane (DPM) segments within the oligomers instead of the outer ones. This discovery challenges previous assumptions and adds a new dimension to the understanding of TSC-based luminophores in non-conjugated systems.

Switchable Decarboxylation by Energy- or Electron-Transfer Photocatalysis

Kolbe dimerization and Hofer-Moest reactions are well-investigated carboxylic acid transformations, wherein new carbon-carbon and carbon-heteroatom bonds are constructed via electrochemical decarboxylation. These transformations can be switched by choosing an electrode that allows control of the reactive intermediate, such as carbon radical or carbocation. However, the requirement of a high current density diminishes the functional group compatibility with these electrochemical reactions. Here, we demonstrate the photocatalytic decarboxylative transformation of activated carboxylic acids in a switchable and functional group-compatible manner. We discovered that switching between Kolbe-type or Hofer-Moest-type reactions can be accomplished with suitable photocatalysts by controlling the reaction pathways: energy transfer (EnT) and single-electron transfer (SET). The EnT pathway promoted by an organo-photocatalyst yielded 1,2-diarylethane from arylacetic acids, whereas the ruthenium photoredox catalyst allows the construction of an ester scaffold with two arylmethyl moieties via the SET pathway. The resulting radical intermediates were coupled to olefins to realize multicomponent reactions. Consequently, four different products were selectively obtained from a simple carboxylic acid. This discovery offers new opportunities for selectively synthesizing multiple products via switchable reactions using identical substrates with minimal cost and effort.

Enabling nonconjugated polyesters emit full-spectrum fluorescence from blue to near-infrared

Near-infrared luminophores have many advantages in advanced applications, especially for structures without π-conjugation aromatic rings. However, the fabrication of red clusteroluminogens from nonconjugated polymers is still a big challenge, let alone the near-infrared clusteroluminogens. Here, we develop nonconjugated luminophores with full-spectrum from blue to near-infrared light (470 ~ 780 nm), based on color phenomenon of nonconjugated polyesters synthesized from the amine-initiated copolymerization of epoxides and cyclic anhydrides. We reveal that amines act as initiators attached to polymer chain ends. The formation of various amine-ester complexes in polyesters induces red to near-infrared light, conceptually, amine-ester complexed clusteroluminescence via intra/inter-chain charge transfer. Significantly, emission colors can be easily tuned by the contents and types of amines, microstructures of polyesters, and their concentration. This work provides a low-cost, scalable platform and strategy for the production of high-efficiency, multicolor luminescent materials.

A Self-Assemble Supramolecular Film with Humidity Visualization Enabled by Clusteroluminescence

Clusteroluminescence (CL) has recently gained significant attention due to its unique through-space interactions associated with a high dependence on the aggregation of subgroups. These distinct features could easily transform the stimuli into visual fluorescence and monitor the fluctuation of the environment but have not received sufficient attention before. In this work, supramolecular films are designed based on the neutralization reaction of anhydride groups and the self-assembly of dynamic covalent disulfide bonds in NaOH aqueous solution. The self-assembly of hydrophilic carboxylate chromophores and hydrophobic disulfide-containing five-membered rings could be observed by the variation of the aggregation state of carboxylate in CL. Furthermore, the dynamic cross-linking films obtained with water-sensitive carboxylate chromophores could alter the aggregation distance stimulated by surrounding water vapor, causing the emission wavelength to change from 534 to 508 nm by varying the relative humidity. This work not only provides an approach to monitor the self-assembly of clusteroluminogens but also offers new strategies for designing stimuli-responsive materials that utilize the intrinsic features of CL.

Luminescent polypeptides

Polypeptides, as biomacromolecules, hold immense potential in various biological applications such as tissue engineering, immunomodulating agents, and target binding. Among these applications, the attention towards luminescent polypeptides has grown significantly, due to their ability to visualize biological processes effectively. In this perspective, we have compiled information on three distinct types of luminescent polypeptides: natural fluorescent proteins, luminophores-bioconjugated polypeptides, and synthesized polypeptides with clusteroluminescence. Last, we shed light on the significance and prospects of clusteroluminescent polypeptides, which are expected to emerge as crucial new-generation bioluminophores, offering high emission efficiency and tunable emission wavelengths.

Aromatic Hydrocarbon Based and Space Interactions Induced Color-tunable Single-component Organic Phosphorescence

Construction of new system and exploration of new approach are of great importance for the improvement of their photophysical properties to meet the growing various uses of phosphorescent materials. Triphenylmethane (TPM), composed only of carbon and hydrogen, exhibits excellent color tunable phosphorescence in air, with ultralong lifetime (836 ms), and wide color-tunable range (from cyan to green, then to yellow and finally to orange, 525 nm-616 nm). Through careful comparison with the single crystal diffraction structure of tetraphenylmethane (TTPM) and theoretical calculation analysis, we believe that various clusters formed through space interactions are crucial for color-tunable phosphorescence.

Hyperbranched Polyborosiloxanes: Non-traditional Luminescent Polymers with Red Delayed Fluorescence

Non-traditional fluorescent polymers have attracted significant attention for their excellent biocompatibility and diverse applications. However, designing and preparing non-traditional fluorescent polymers that simultaneously possess long emission wavelengths and long fluorescence lifetime remains challenging. In this study, a series of novel hyperbranched polyborosiloxanes (P1-P4) were synthesized. As the electron density increases on the monomer diol, the optimal emission wavelengths of the P1-P4 polymers gradually red-shift to 510, 570, 575, and 640 nm, respectively. In particular, P4 not only exhibits red emission but also demonstrates delayed fluorescence with a lifetime of 9.73 μs and the lowest critical cluster concentration (1.76 mg/mL). The experimental results and theoretical calculations revealed that the synergistic effect of dual heteroatom-induced electron delocalization and through-space O⋅⋅⋅O and O⋅⋅⋅N interaction was the key factor contributing to the red-light emission with delayed fluorescence. Additionally, these polymers showed excellent potential in dual-information encryption. This study provides a universal design strategy for the development of unconventional fluorescent polymers with both delayed fluorescence and long-wavelength emission.

In situ observation of a stepwise [2 + 2] photocycloaddition process using fluorescence spectroscopy

Using highly sensitive and selective in situ techniques to investigate the dynamics of intermediates formation is key to better understand reaction mechanisms. However, investigating the early stages of solid-state reactions/transformations is still challenging. Here we introduce in situ fluorescence spectroscopy to observe the evolution of intermediates during a two-step [2 + 2] photocycloaddition process in a coordination polymer platform. The structural changes and kinetics of each step under ultraviolet light irradiation versus time are accompanied by the gradual increase-decrease of intensity and blue-shift of the fluorescence spectra from the crystals. Monitoring the fluorescence behavior using a laser scanning confocal microscope can directly visualize the inhomogeneity of the photocycloaddition reaction in a single crystal. Theoretical calculations allow us to rationalize the fluorescence behavior of these compounds. We provide a convenient strategy for visualizing the solid-state photocycloaddition dynamics using fluorescence spectroscopy and open an avenue for kinetic studies of a variety of fast reactions.

Pyrazine as a More Efficient Luminophore than Benzene for Producing Red-Shifted and Enhanced Photoluminescence

The development of organic photoluminescent (PL) materials with red-shifted and enhanced emissions is beneficial to promoting their applications. Luminescent materials based on aromatic heterocycles (e.g., pyrazine) usually have red-shifted and enhanced photoluminescence compared with phenyl-based luminescent materials. In this work, the photoluminescence behaviors of pyrazine and its derivatives (o-dichloro-, o-dicyano-, and dichlorodicyano-substituted) are compared with those of benzene and its derivatives. All compounds exhibit fluorescence emissions ranging from blue to yellow, and the fluorescence emissions of pyrazinyl compounds are more red-shifted than those of phenyl compounds. Except for the o-dicyano-substituted compound, pyrazinyl compounds exhibit stronger fluorescence emissions than corresponding phenyl compounds in both pure substances and ethanol solutions. In addition, both 5,6-dichloro-2,3-dicyanopyrazine (P4) and 4,5-dichloro-1,2-dicyanobenzene (B4) exhibit room temperature phosphorescence, and the maximum delayed emission wavelength is red-shifted from 575 nm of B4 to 637 nm of P4. The energy gaps between the highest occupied molecular orbital and the lowest unoccupied molecular orbital of the monomers of pyrazinyl compounds are reduced by 0.07-1.37 eV compared with the monomers of phenyl compounds, which is the fundamental reason for the red-shifted emissions of the pyrazinyl compounds. Moreover, compared to B4, the smaller molecular spacing in the P4 crystal structure facilitates interlayer electron transfer and hence the formation of more extended through-space conjugation, resulting in the red-shifted emission of P4. This work proves that pyrazine is a more efficient luminophore than benzene for constructing PL compounds with longer emission wavelengths and higher quantum yields, which are important in guiding the design and preparation of organic PL materials.

Excited-State Odd-Even Effect in Through-Space Interactions

The odd-even effect is a fantastic phenomenon in nature, which has been applied in diverse fields such as organic self-assembled monolayers and liquid crystals. Currently, the origin of each odd-even effect remains elusive, and all of the reported odd-even effects are related to the ground-state properties. Here, we discover an excited-state odd-even effect in the through-space interaction (TSI) of nonconjugated tetraphenylalkanes (TPAs). The TPAs with an even number of alkyl carbon atoms (C2-TPA, C4-TPA, and C6-TPA) show strong TSI, long-wavelength emission, and high QY. However, the odd ones (C1-TPA, C3-TPA, C5-TPA, and C7-TPA) are almost nonexistent with negligible QY. Systematically experimental and theoretical results reveal that the excited-state odd-even effect is synthetically determined by three factors: alkyl geometry, molecular movability, and intermolecular packing. Moreover, these flexible luminescent TPAs possess tremendous advantages in fluorescent information encryptions. This work extends the odd-even effect to photophysics, demonstrating its substantial importance and universality in nature.

Photoactivation of Solid-State Fluorescence through Controllable Intermolecular [2+2] Photodimerization

Intermolecular [2+2] photodimerization provides a distinctive approach to construct photoresponsive fluorescent materials in a manner of switching on solid-state fluorescence. Herein, we report efficient photoactivation of bright solid-state fluorescence based on controllable intermolecular [2+2] photodimerization reaction of benzo[b]thiophene 1,1-dioxide (BTO) derivatives, which provides a simple and effective way to construct smart photoresponsive solid-state fluorescent materials. Rational choice of substituents in BTO molecular skeleton enables them to efficiently undergo photodimerization through regulating molecular stacking in crystal, and also leads to photoactivation of solid-state fluorescence due to the generation of brightly fluorescent photodimers. This intermolecular photodimerization reaction also offers an effective method to synthesize photostable AIEgens with purely through-space conjugation.

Aggregation-Induced Emission (AIE), Life and Health

Light has profoundly impacted modern medicine and healthcare, with numerous luminescent agents and imaging techniques currently being used to assess health and treat diseases. As an emerging concept in luminescence, aggregation-induced emission (AIE) has shown great potential in biological applications due to its advantages in terms of brightness, biocompatibility, photostability, and positive correlation with concentration. This review provides a comprehensive summary of AIE luminogens applied in imaging of biological structure and dynamic physiological processes, disease diagnosis and treatment, and detection and monitoring of specific analytes, followed by representative works. Discussions on critical issues and perspectives on future directions are also included. This review aims to stimulate the interest of researchers from different fields, including chemistry, biology, materials science, medicine, etc., thus promoting the development of AIE in the fields of life and health.

Tetraphenyl-1,4-dioxin and Tetraphenyl-pyrane-4-one: Old Molecules, New Insights

Aggregation-induced emission (AIE) is a phenomenon where certain molecules or materials become highly luminescent when they aggregate or come together in a condensed state, such as a solid or a solution. Moreover, new molecules which show AIE properties are designed and synthesized for various applications like imaging, sensing, and optoelectronics. 2,3,5,6-Tetraphenylpyrazine (TPP) is one of the well-established examples of AIE. Herein, 2,3,5,6-tetraphenyl-1,4-dioxin (TPD) and 2,3,4,5-tetraphenyl-4H-pyran-4-one (TPPO), which are old molecules with TPP similarity, were studied, and new insights in terms of structure and aggregation-caused quenching (ACQ)/AIE properties were gained by means of theoretical calculations. Those calculations performed on TPD and TPPO aimed to provide a better understanding of their molecular structures and how they affect their luminescence properties. This information could be used to design new materials with improved AIE properties or to modify existing materials to overcome ACQ.

A selectivity-enhanced fluorescence imprinted sensor based on yellow-emission peptide nanodots for sensitive and visual smart detection of λ-cyhalothrin

The development of precise and efficient detection technologies to recognize λ-cyhalothrin (LC) in agricultural products has attracted attention worldwide due to its widespread use and notable toxic effects on humans. Herein, a novel fluorescence biomimetic nanosensor was elaborately designed based on Zn(II)-doped cyclo-ditryptophan (c-WW)-type peptide nanodots and incorporating molecularly imprinted polymer (c-WW/Zn-PNs@MIP) for LC assays. C-WW/Zn-PNs obtained by self-assembly with aromatic cyclic dipeptides as basic building blocks and coordination with Zn(II) have low-toxicity, photostability, and bright yellow fluorescence emission, as a sensitive signal transducer. High-affinity imprinting sites further endow c-WW/Zn-PNs@MIP with superior selectivity and reusability. Based on prominent merits, c-WW/Zn-PNs@MIP demonstrated a good linear range (1-360 μg/L) with a low limit of detection (LOD) (0.93 μg/L), fast kinetics in target capture (10 min), and strong practicability in the capture of LC from real samples (spiked recovery of 81.0-107.7%). Additionally, to attain onsite profiling of LC, a visual platform was developed by integrating c-WW/Zn-PNs@MIP with a smartphone-assisted optical device. This smart evaluation system can capture concentration-dependent fluorescent images and accurately digitize them, enabling quantitative analysis of LC. This study developed a fluorescent c-WW/Zn-PNs@MIP-based smart evaluation system as a novel platform for LC monitoring applications, which not only has enormous economic value but also great environmental health significance.

Effects of Through-Bond and Through-Space Conjugations on the Photoluminescence of Small Aromatic and Aliphatic Aldimines

Through-bond conjugation (TBC) and/or through-space conjugation (TSC) determine the photophysical properties of organic luminescent compounds. No systematic studies have been carried out to understand the transition from aromatic TBC to non-aromatic TSC on the photoluminescence of organic luminescent compounds. In this work, a series of small aromatic and aliphatic aldimines were synthesized. For the aromatic imines, surprisingly, N,1-diphenylmethanimine with the highest TBC is non-emissive, while N-benzyl-1-phenylmethanimine and N-cyclohexyl-1-phenylmethanimine emit bright fluorescence in aggregate states. The aliphatic imines are all emissive, and their maximum emission wavelength decreases while the quantum yield increases with a decrease in steric hindrance. The imines show concentration-dependent and excitation-dependent emissions. Theoretical calculations show that the TBC extents in the aromatic imines are not strong enough to induce photoluminescence in a single molecule state, while the intermolecular TSC becomes dominant for the fluorescence emissions of both aromatic and aliphatic imines in aggregate states, and the configurations and spatial conformations of the molecules in aggregate states play a key role in the formation of effective TSC. This study provides an understanding of how chemical and spatial structures affect the formation of TBC and TSC and their functions on the photoluminescence of organic luminescent materials.

AIEgen-Enabled Multicolor Visualization for the Formation of Supramolecular Polymer Networks

Extensive reports on the use of supramolecular polymer networks (SPNs) in self-healing materials, controlled release system and degradable products have led more researchers to tap their potential owing to the unique properties. Yet, the attendant efforts in the visualization through conventional luminescence methods during the formation of SPNs have been met with limited success. Herein, we designed a special type of SPNs prepared by PPMU polymer chains containing pyrene benzohydrazonate (PBHZ) molecules as AIEgens for the multicolor visualization with naked eyes. The complete detection of the formation process of the networks relied on the PBHZ molecules with aggregation-induced ratiometric emission (AIRE) effect, which enabled the fluorescence of the polymer networks transits from blue to cyan, and then to green with the increasing crosslinking degree derived from the hydrogen bonds between 2-ureido-4-pyrimidone (UPy) units of the polymer chains. Additionally, we certificated the stimuli-responsiveness of the obtained SPNs, and the fluorescence change, as well as observing the morphology transition. The AIEgen-enabled multicolor visualization of the formation of SPNs may provide better understanding of the details of the crosslinking interactions in the microstructural evolution, giving more inspiration for the multifunctional products based on SPNs.

Cluster-Dominated Electrochemiluminescence of Tertiary Amines in Polyethyleneimine Nanoparticles: Mechanism Insights and Sensing Application

Designing and screening highly efficient and cost-effective luminophores have always been a challenge to develop sensitive electrochemiluminescence (ECL) biosensors. Herein, polyethyleneimine nanoparticles (PEI NPs), a kind of nonconjugated polymer (NCP) NPs with tertiary amine clusters, were developed as an ECL luminophore. Specifically, PEI NPs were synthesized by a one-step hydrothermal method using PEI and formaldehyde. The properties of PEI NPs were investigated in detail using photochemical and electrochemical techniques. The results showed cluster-dominated luminescence of tertiary amines in PEI NPs via "through-space conjugation". This non-negligible ECL performance (at 631 nm) was also verified by the initiated reduction-oxidation process. With persulfate as a coreactant, PEI NPs acted as both the luminophore and coreaction accelerator to enhance the ECL intensity remarkably, which was eightfold higher than that of isolated PEI. Moreover, choosing dopamine as the model target, a highly sensitive "signal off" ternary ECL sensor was constructed utilizing PEI NPs as the luminophore. Dopamine could be oxidized to benzoquinone at the sensing interface, quenching the signal via ECL energy transfer. Free from any signal amplification, the proposed sensor achieved a low detection limit (4.3 nM) for target monitoring with good selectivity and stability. This strategy not only provides a unique perspective for designing novel efficient and facile ECL luminophores of tertiary amines but also broadens the biological application of NCP NPs.

Aliphatic Polyesters with White-Light Clusteroluminescence

Single-molecule white-light emission (SMWLE) has many advantages in practical applications; however, the fabrication of SMWLE from nonconjugated luminescent polymers, namely, clusteroluminogens (CLgens), is still a big challenge. Herein, the first example of linear nonconjugated polyesters with SMWLE is reported. Twenty-four kinds of nonconjugated aliphatic polyesters with tunable clusteroluminescence (CL) colors and efficiency were synthesized by the copolymerization of six epoxides and four anhydrides. Experimental and calculation results prove that, at the primary structure level, the balance of structural flexibility and rigidity via adjusting the side-chain length significantly enhances the efficiency of CL without wavelength change. However, altering the chemical structures of the monomer from succinic anhydride to trans-maleic anhydride (MA), cis-MA, and citraconic anhydride (CA), secondary structures of these polyesters change from helix to straight and folding sheet accompanied by gradually red-shifted CL from 460 to 570 nm due to the increase in through-space n-π* interactions, as demonstrated by the computational and experimental results. Then, pure SMWLE with CIE coordination (0.30, 0.32) based on overlapped short-wavelength and long-wavelength CL is achieved in CA-based polyesters. This work not only provides further insights into the emission mechanism of CL but also provides a new strategy to manipulate the properties of CL by regulating the hierarchical structures of CLgens.

Tunable Photoluminescence Properties of Cotton Fiber With Gradually Changing Crystallinity

The alkali mercerizing process of semicrystalline cotton fiber (CF) is widely used in the printing and dyeing industry. The crystallinity change in the mercerizing process has been studied and certain laws have been obtained, but there is still a certain distance between the theoretical research results and the practical applications. CF is almost composed of cellulose, combined with the photoluminescence (PL) phenomenon of cellulose; herein, the varying crystallinity is correlated with its PL behavior after being treated with different concentrations of NaOH. In line with the characteristics of nonconventional luminogens, CF enjoys excitation-dependent emission and persistent room temperature phosphorescence (p-RTP) behavior. The emission spectra of all samples under the same excitation wavelength indicate that the change of CF crystallinity has a significant impact on its fluorescence and p-RTP emission. As the concentration of NaOH increases, the varying trend of quantum efficiency (QY) is consistent with the changed crystallinity of CF. Interestingly, the lifetime of p-RTP is exactly the opposite of the crystallinity change law. Clustering-triggered emission (CTE), crystallization-Induced Phosphorescence (CIP) mechanism, and the swelling due to hydrated sodium ions can reasonably explain these interesting photophysical processes, which also can be supported by theoretical calculations. The above studies have basically clarified the inherent law between the crystalline change of CF and the PL emission behavior during the alkali treatment process, which can be used as a theoretical reference for real-time monitoring of CF crystallinity changes using the spectral method in the actual cotton mercerizing process.

Secondary through-space interactions facilitated single-molecule white-light emission from clusteroluminogens

Clusteroluminogens refer to some non-conjugated molecules that show visible light and unique electronic properties with through-space interactions due to the formation of aggregates. Although mature and systematic theories of molecular photophysics have been developed to study conventional conjugated chromophores, it is still challenging to endow clusteroluminogens with designed photophysical properties by manipulating through-space interactions. Herein, three clusteroluminogens with non-conjugated donor-acceptor structures and different halide substituents are designed and synthesized. These compounds show multiple emissions and even single-molecule white-light emission in the crystalline state. The intensity ratio of these emissions is easily manipulated by changing the halide atom and excitation wavelength. Experimental and theoretical results successfully disclose the electronic nature of these multiple emissions: through-space conjugation for short-wavelength fluorescence, through-space charge transfer based on secondary through-space interactions for long-wavelength fluorescence, and room-temperature phosphorescence. The introduction of secondary through-space interactions to clusteroluminogens not only enriches their varieties of photophysical properties but also inspires the establishment of novel aggregate photophysics for clusteroluminescence.

Although mature and systematic theories of molecular photophysics have been developed, it is still challenging to endow clusteroluminogens (CLgens) with designed photophysical properties by manipulating through-space interactions. Here, the authors design three CLgens that show multiple emissions and white-light emission in the crystalline state, and emphasize the important role of secondary through-space interactions between the acceptor and non-conjugated donor units.

The effect of hydration and dehydration on the conformation, assembling behavior and photoluminescence of PBLG

Hydration and dehydration play crucial roles in hydrophobic effects (HEs) and are yet to be understood. Poly(γ-benzyl-L-glutamate) (PBLG) homopolymers in THF/water with various water contents were investigated. We discovered that PBLG was hydrated at low water contents and adopted a helical conformation. The chain became dehydrated with increasing water content, which converted the PBLG₁₀₀ helix to a PPII-helix. The variation in the conformation resulted in an alteration of the self-assembled morphologies from fibers to particles. For PBLG₁₂ with a shorter chain, the chain underwent an α-to-β transition in the conformation due to dehydration as the water content increased, and correspondingly the morphologies varied from tapes to helical ribbons, and eventually to toroids at a higher water content. We also observed that this α-to-β transition is accompanied by an increase in intensity of the fluorescence, which is attributed to the through-space-conjugation of tightly packed phenyl groups within the β-sheet. The discovered effect of hydration and dehydration on the PBLG chain conformation, self-assembling behavior and optical function is essential for the innovation of polypeptide materials and understanding of water-mediated biological systems.

Insight into the Clustering-Triggered Emission and Aggregation-Induced Emission Exhibited by an Adamantane-Based Molecular System

Chemical clustering of a nonemissive and non-AIEgen of Cb-Ph endowed a molecular system (Ad-4CP) with unique dual emissions in the solution state, a typical clustering-triggered emission (CTE), and high emission efficiency in the aggregated state, an aggregation-induced emission (AIE). The CTE was ascribed to intramolecular charge transfer (CT); however, the AIE was ascribed to both intra- and intermolecular CTs. The two-level CTs make the Ad-4CP exhibit remarkable excitation-dependent emissions. We believe that the present work not only delivers a peculiar molecular system with both CTE and AIE properties but also provides an example on how molecular engineering promotes the rational design of CTE and AIE systems via clusterization of suitable structural units.

Research Progress of Intramolecular π-Stacked Small Molecules for Device Applications

Organic semiconductors can be designed and constructed in π-stacked structures instead of the conventional π-conjugated structures. Through-space interaction (TSI) occurs in π-stacked optoelectronic materials. Thus, unlike electronic coupling along the conjugated chain, the functional groups can stack closely to facilitate spatial electron communication. Using π-stacked motifs, chemists and materials scientists can find new ways for constructing materials with aggregation-induced emission (AIE), thermally activated delayed fluorescence (TADF), circularly polarized luminescence (CPL), and room-temperature phosphorescence (RTP), as well as enhanced molecular conductance. Organic optoelectronic devices based on π-stacked molecules have exhibited very promising performance, with some of them exceeding π-conjugated analogues. Recently, reports on various organic π-stacked structures have grown rapidly, prompting this review. Representative molecular scaffolds and newly developed π-stacked systems could stimulate more attention on through-space charge transfer the well-known through-bond charge transfer. Finally, the opportunities and challenges for utilizing and improving particular materials are discussed. The previous achievements and upcoming prospects may provide new insights into the theory, materials, and devices in the field of organic semiconductors.

Through-Space Interaction of Tetraphenylethylene: What, Where, and How

Electronic conjugation through covalent bonds is generally considered as the basis for the electronic transition of organic luminescent materials. Tetraphenylethylene (TPE), an efficient fluorophore with aggregation-induced emission character, fluoresces blue emission in the aggregate state, and such photoluminescence is always ascribed to the through-bond conjugation (TBC) among the four phenyl rings and the central C═C bond. However, in this work, systematic spectroscopic studies and DFT theoretical simulation reveal that the intramolecular through-space interaction (TSI) between two vicinal phenyl rings generates the bright blue emission in TPE but not the TBC effect. Furthermore, the evaluation of excited-state decay dynamics suggests the significance of photoinduced isomerization in the nonradiative decay of TPE in the solution state. More importantly, different from the traditional qualitative description for TSI, the quantitative elucidation of the TSI is realized through the atoms-in-molecules analysis; meanwhile, a theoretical solid-state model for TPE and other multirotor systems for studying the electronic configuration is preliminarily established. The mechanistic model of TSI delineated in this work provides a new strategy to design luminescent materials beyond the traditional theory of TBC and expands the quantum understanding of molecular behavior to the aggregate level.

Quantum confined peptide assemblies in a visual photoluminescent hydrogel platform and smartphone-assisted sample-to-answer analyzer for detecting trace pyrethroids

Quantum confinement (QC) effect-related materials have been extensively studied as photoluminescent probes for agricultural, food, and environmental analyses, with the advantage of simple-to-synthesize, reusable, nontoxic, and environmentally friendly. Herein, we propose a strategy to dimerize aromatic cyclo-dipeptides, namely cyclo-ditryptophan (cyclo-WW), cyclo-diphenylalanine (cyclo-FF), and cyclo-dihistidine (cyclo-HH), into quantum dots as basic building blocks for the self-assembly of QC supramolecular structures with excellent photoluminescent properties in aqueous solutions. In particular, through coordination with Zn(II), the bandgap can be tuned to change the photo-absorption and luminescence properties of the cyclo-dipeptide-based QC assemblies. The fluorescence quantum yield of cyclo-WW+Zn(II) was 16.9%. Such a good luminous effect makes it applicable to the detection of LC. A good linear relationship between fluorescence response of cyclo-WW+Zn(II) and LC concentration was observed in the range of 5-350 μg/L, with a low limit of detection of 2.9 μg/L and good spiked recovery of 90.72%-104.3%. A visual platform using the cyclo-WW+Zn(II)-based photoluminescent hydrogel and smartphone-assisted sample-to-answer analyzer were developed, which showed good responsiveness to LC. The developed fluorescence method, validated using traditional HPLC, is a biocompatible alternative for the rapid detection of trace pollutants with the advantages of portability and simple operation.

Carbodiimide-Driven Dimerization and Self-Assembly of Artificial, Ribose-Based Amphiphiles

The aqueous self‐assembly of amphiphiles into aggregates such as micelles and vesicles has been widely investigated over the past decades with applications ranging from materials science to drug delivery. The combination of characteristic properties of nucleic acids and amphiphiles is of substantial interest to mimic biological self‐organization and compartmentalization. Herein, we present ribose‐ and ribonucleotide‐based amphiphiles and investigate their self‐assembly as well as their fundamental reactivity. We found that various types of aggregates are formed, ranging in size from nanometers to micrometers and all amphiphiles exhibit aggregation‐induced emission (AIE) in solution as well as in the solid state. We also observed that the addition of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide (EDC) leads to rapid and selective dimerization of the amphiphiles into pyrophosphates, which decreases the critical aggregation concentration (CAC) by a factor of 25 when compared to the monomers. Since the propensity for amphiphile dimerization is correlated with their tendency to self‐assemble, our results may be relevant for the formation of rudimentary compartments under prebiotic conditions.

ortho-Terphenylene Viologens with Through-Space Conjugation for Enhanced Photocatalytic Oxidative Coupling and Hydrogen Evolution

A series of novel ortho-terphenylene viologen derivatives (o-TPV²⁺) with through-space conjugation (TSC) via the combination of ortho-terphenylene skeletons with viologen structure is reported. Their optoelectronic properties can be adjusted by N-arylation or N-alkylation reactions. Compared with other viologen derivatives, o-TPV²⁺ not only exhibits strong photoluminescence but also retards the charge recombination process and stabilizes the diradical state without forming a quinoid structure due to the special TSC effect. Based on their special redox characteristics, o-TPV²⁺ was applied to the photocatalytic oxidative coupling of benzylamine with 96% yield. In addition, pTA-o-TPV²⁺ (tethered with p-toluic acid)-modified g-C₃N₄ was used for visible-light-driven hydrogen production for the first time, exceeding 15 times the rate over unmodified g-C₃N₄.

Fluorescent supramolecular polymers of barbiturate dyes with thiophene-cored twisted π-systems

Because supramolecular polymerization of emissive π-conjugated molecules depends strongly on π-π stacking interaction, the formation of well-defined one-dimensional nanostructures often results in a decrease or only a small increase of emission efficiency. This is also true for our barbiturate-based supramolecular polymers wherein hydrogen-bonded rosettes of barbiturates stack quasi-one-dimensionally through π-π stacking interaction. Herein we report supramolecular polymerization-induced emission of two regioisomeric 2,3-diphenylthiophene derivatives functionalized with barbituric acid and tri(dodecyloxy)benzyl wedge units. In CHCl3, both compounds are molecularly dissolved and accordingly poorly emissive due to a torsion-induced non-radiative decay. In methylcyclohexane-rich conditions, these barbiturates self-assemble to form crystalline nanofibers and exhibit strongly enhanced emission through supramolecular polymerization driven by hydrogen-bonding. Our structural analysis suggests that the barbiturates form a tape-like hydrogen-bonding motif, which is rationalized by considering that the twisted geometries of 2,3-diphenylthiophene cores prevend the competing rosettes from stacking into columnar supramolecular polymers. We also found that a small difference in the molecular polarity originating from the substitutional position of the thiophene core influences interchain association of the supramolecular polymers, affording different luminescent soft materials, gel and nanosheet.

Pathways to fluorescence via restriction of intramolecular motion in substituted tetraphenylethylenes

The design of materials with enhanced luminescence properties is a fast-developing field due to the potential applicability of these materials as light-emitting diodes or for bioimaging. A transparent way to enhance the emission properties of interesting molecular candidates is blocking competing and unproductive non-radiative relaxation pathways by the restriction of intramolecular motions. Rationalized functionalization is an important possibility to achieve such restrictions. Using time-dependent density functional theory (TD-DFT) based on the ωB97XD functional and the semiempirical tight-binding method including long-range corrections (TD-LC-DFTB), this work investigates the effect of functionalization of the paradigmatic tetraphenylethylene (TPE) on achieving restricted access to conical intersections (RACI). Photodynamical surface hopping simulations have been performed on a larger set of compounds including TPE and ten functionalized TPE compounds. Functionalization has been achieved by means of electron-withdrawing groups, bulky groups which block the relaxation channels via steric hindrance and groups capable of forming strong hydrogen bonds, which restrict the motion via the formation of hydrogen bond channels. Most of the investigated functionalized TPE candidates show ultrafast deactivation to the ground state due to their still existing structural flexibility, but two examples, one containing -CN and -CF₃ groups and a second characterized by a network of hydrogen bonds, have been identified as interesting candidates for creating efficient luminescence properties in solution.

Room-temperature Barbier single-atom polymerization induced emission as a versatile approach for the utilization of monofunctional carboxylic acid resources

Barbier polymerization is realized at room-temperature with single-atom polymerization and polymerization-induced emission characteristics, which exhibits capability on sensitive explosive detection and artificial light-harvesting system fabrication.

An unexpected non-conjugated AIEgen with a discrete dimer for pure intermolecular through-space charge transfer emission

Manipulation of the charge transfer in donor-acceptor-type molecules is essential for the design of controllable aggregate luminescent materials. Apart from the traditional through-bond charge transfer (TBCT) systems which suffer from complicated structural design, poor tunability and low quantum efficiency, through-space charge transfer (TSCT) has been proved as an alternative yet facile strategy in tuning photophysical processes. In this work, by simply changing nucleophilic reaction bases, a traditional conjugated acrylonitrile AP1 and an unexpected non-conjugated AP2 with a carboxamide-functionalized oxirane linker could be obtained. The long-range π-π stacking in conjugated AP1 results in mixed intramolecular TBCT plus intermolecular TSCT emission. However, facilitated by the steric hindrance effect of the big oxirane connector and the unique discrete dimer packing, non-conjugated AP2 exhibits pure and efficient intermolecular TSCT emission in both aggregate and crystalline states. The flexibility of the non-conjugated character further leads to better reversible stimuli-responsiveness to mechanical force for AP2 than for the rigid AP1.

Unusual Alternating Crystallization-Induced Emission Enhancement Behavior in Nonconjugated ω-Phenylalkyl Tropylium Salts

The alternating physical properties, especially melting points, of α,ω-disubstituted n-alkanes and their parent n-alkanes had been known since Baeyer's report in 1877. There is, however, no general and comprehensive explanation for such a phenomenon. Herein, we report the synthesis and examination of a series of novel ω-phenyl n-alkyl tropylium tetrafluoroborates, which also display alternation in their physicochemical characters. Despite being organic salts, the compounds with odd numbers of carbons in the alkyl bridge exist as room temperature ionic liquids. In stark contrast to this, the analogues with even numbers of carbons in the linker are crystalline solids. These solid nonconjugated molecules exhibit curious photoluminescent properties, which can be attributed to their ability to form through-space charge-transfer complexes to cause crystallization-induced emission enhancement. Most notably, the compound with the highest photoluminescent quantum yield in this series showed an unusual arrangement of carbocationic dimer in the solid state. A combination of XRD analysis and ab initio calculations revealed interesting insights into these systems.

Altering Chain Flexibility of Aliphatic Polyesters for Yellow-Green Clusteroluminescence in 38 % Quantum Yield

Preparation of non-conjugated polymers with long-wavelength emission and high quantum yield (QY) is still a huge challenge. Herein, we report the first example of linear non-conjugated polyester exhibiting yellow-green clusteroluminescence (CL) and a high QY of 38 %. We discovered that the polyester P3 with balanced flexibility and rigidity showed the longest CL wavelength and highest QY. Systematically photophysical characterization unravel the key role of ester cluster in the CL and the cluster formation via the aggregate of ester units was visualized. Moreover, P3 was demonstrated to be a highly selective, quick-responsive (ca. 1.2 min) and sensitive detector (detection limit is 0.78 μM) for irons owing to the fast disassociation of clusters by irons. This work not only gains further mechanistic insight into CL but also provides a new strategy to design high-efficiency and long-wavelength CL, meanwhile, enlightens the glorious application prospect of luminescent polyester.

Through-Space Interactions in Clusteroluminescence

Conventional π-conjugated luminophores suffer from problems such as emission quenching, biotoxicity, environmental pollution, etc. The emerging nonconjugated and nonaromatic clusteroluminogens (CLgens) are expected to overcome these stubborn drawbacks, so research of CLgens shows great significance not only for practical application but also for the construction of fundamental photophysical theories. This perspective summarizes the unusual features of CLgens in comparison to traditional chromophores, such as nonconjugated molecular structures, unmatched absorption and excitation, excitation-dependent luminescence, multiple emission peaks, and room-temperature phosphorescence. Different from the theory of through-bond conjugation in π-conjugated luminophores, through-space interactions, including through-space n···n interaction and through-space n···π interaction, are regarded as the emitting sources of nonconjugated CLgens. In addition, the formation of network clusters is proposed as an efficient strategy to improve the performance of CLgens, and their potential applications of anticounterfeiting, photoelectronic devices, and bioimaging are prospected.

Nonconventional luminophores: characteristics, advancements and perspectives

Nonconventional luminophores devoid of remarkable conjugates have attracted considerable attention due to their unique luminescence behaviors, updated luminescence mechanism of organics and promising applications in optoelectronic, biological and medical fields. Unlike classic luminogens consisting of molecular segments with greatly extended electron delocalization, these unorthodox luminophores generally possess nonconjugated structures based on subgroups such as ether (-O-), hydroxyl (-OH), halogens, carbonyl (CO), carboxyl (-COOH), cyano (CN), thioether (-S-), sulfoxide (SO), sulfone (OSO), phosphate, and aliphatic amine, as well as their grouped functionalities like amide, imide, anhydride and ureido. They can exhibit intriguing intrinsic luminescence, generally featuring concentration-enhanced emission, aggregation-induced emission, excitation-dependent luminescence and prevailing phosphorescence. Herein, we review the recent progress in exploring these nonconventional luminophores and discuss the current challenges and future perspectives. Notably, different mechanisms are reviewed and the clustering-triggered emission (CTE) mechanism is highlighted, which emphasizes the clustering of the above mentioned electron rich moieties and consequent electron delocalization along with conformation rigidification. The CTE mechanism seems widely applicable for diversified natural, synthetic and supramolecular systems.