Cycloreversion Reaction of a Diarylethene Derivative at Higher Excited States Attained by Two-Color, Two-Photon Femtosecond Pulsed Excitation

Relaxation dynamics of higher excited states of perylene-substituted perylene bisimide derivatives

Stepwise two-photon absorption processes have received considerable attention, especially in photocatalysis, due to their relatively lower power threshold, characteristic spatial selectivity, amplification of chemical reactions, and so on. Meanwhile, studies on the relaxation dynamics of higher excited states in condensed systems have been limited for several molecular systems due to the short-lived nature of these states. In this study, we synthesized perylene-substituted perylene bisimide (PBI) and its derivate as model compounds and investigated their excited-state dynamics, including higher excited states, using pump-repump-probe spectroscopy. We revealed that these molecules form charge-transfer (CT) states instantaneously after the excitation, regardless of whether it is the perylene moiety or the PBI moiety that is excited. The lifetime of the CT state was shorter when the distance between the donor (perylene) and the acceptor (PBI) was shorter. Moreover, we also revealed that a higher-lying CT state generated by the stepwise excitation of the CT state using a 740-nm pulse induced Stark effect to the neighboring perylene moiety. The Stark effect not only gives more detailed information about the CT state, but also presents the possibility of new photofunctions, such as instantaneous modulation of the electronic state to achieve optimal electronic properties. These insights contribute to understanding advanced photochemical reactions and would be important for exploring photocatalytic reactions involving higher excited states.

Near-infrared two-photon absorption and excited state dynamics of a fluorescent diarylethene derivative

Near-infrared two-photon absorption and excited state dynamics of a fluorescent diarylethene (fDAE) derivative were investigated by time-resolved absorption and fluorescence spectroscopies. Prescreening with quantum chemical calculation predicted that a derivative with methylthienyl groups (mt-fDAE) in the closed-ring isomer has a two-photon absorption cross-section larger than 1000 GM, which was experimentally verified by Z-scan measurements and excitation power dependence in transient absorption. Comparison of transient absorption spectra under one-photon and simultaneous two-photon excitation conditions revealed that the closed-ring isomer of mt-fDAE populated into higher excited states deactivates following three pathways on a timescale of ca. 200 fs: (i) the cycloreversion reaction more efficient than that by the one-photon process, (ii) internal conversion into the S1 state, and (iii) relaxation into a lower state (S1' state) different from the S1 state. Time-resolved fluorescence measurements demonstrated that this S1' state is relaxed to the S1 state with the large emission probability. These findings obtained in the present work contribute to extension of the ON-OFF switching capability of fDAE to the biological window and application to super-resolution fluorescence imaging in a two-photon manner.

New insights into the photocyclization reaction of a popular diarylethene switch: a nonadiabatic molecular dynamics study

Diarylethene (DAE) molecular switches have continued to attract the attention of researchers for over 20 years. Their remarkable photophysical properties endow them with countless applications in photonics and molecular technologies. However, despite extensive experimental and theoretical research, the mechanism of DAE photoswitching is not yet fully rationalized. In this work, we investigate the ring closure dynamics of a popular DAE switch, 1,2-bis(3-methyl-5-phenyl-2 thienyl)perfluorocyclopentene (PT), using nonadiabatic molecular dynamics (NAMD) simulations. Employing the fewest switches surface hopping protocol, along with the semi-empirical multireference ODM2/MRCI-SD method, we investigate possible reaction pathways for this photoprocess, as well as their timescales and resulting photoproducts. Furthermore, using a dynamic configuration-space sampling procedure, we elucidate the role of triplet states in the photocyclization of PT, supporting available experimental data for the closely related DMPT molecule, which indicate an ultrafast intersystem crossing (ISC) transition competing with the singlet-driven photoswitching reaction. Our findings not only corroborate experimental studies on DAE switches, but also provide new mechanistic insights into the potential use in the rational design of DAE switches tailored for specific technological applications.

Two-Dimensional Electronic Spectroscopy Resolves Relative Excited-State Displacements

Knowledge of relative displacements between potential energy surfaces (PES) is critical in spectroscopy and photochemistry. Information on displacements is encoded in vibrational coherences. Here we apply ultrafast two-dimensional electronic spectroscopy in a pump-probe half-broadband (HB2DES) geometry to probe the ground- and excited-state potential landscapes of cresyl violet. 2D coherence maps reveal that while the coherence amplitude of the dominant 585 cm-1 Raman-active mode is mainly localized in the ground-state bleach and stimulated emission regions, a 338 cm-1 mode is enhanced in excited-state absorption. Modeling these data with a three-level displaced harmonic oscillator model using the hierarchical equation of motion-phase matching approach (HEOM-PMA) shows that the S1 ← S0 PES displacement is greater along the 585 cm-1 coordinate than the 338 cm-1 coordinate, while Sn ← S1 displacements are similar along both coordinates. HB2DES is thus a powerful tool for exploiting nuclear wavepackets to extract quantitative multidimensional, vibrational coordinate information across multiple PESs.

Photo-actuators via epitaxial growth of microcrystal arrays in polymer membranes

Photomechanical crystals composed of three-dimensionally ordered and densely packed photochromes hold promise for high-performance photochemical actuators. However, bulk crystals with high structural ordering are severely limited in their flexibility, resulting in poor processibility and a tendency to fragment upon light exposure, while previous nano- or microcrystalline composites have lacked global alignment. Here we demonstrate a photon-fuelled macroscopic actuator consisting of diarylethene microcrystals in a polyethylene terephthalate host matrix. These microcrystals survive large deformations and show a high degree of three-dimensional ordering dictated by the anisotropic polyethylene terephthalate, which critically also has a similar stiffness. Overall, these ordered and compliant composites exhibit rapid response times, sustain a performance of over at least hundreds of cycles and generate work densities exceeding those of single crystals. Our composites represent the state-of-the-art for photochemical actuators and enable properties unattainable by single crystals, such as controllable, reversible and abrupt jumping (photosalient behaviour).

Dynamics of the energy transfer involved in a diarylethene-perylenebisimide dyad: comparison between the molecule and the nanoparticle level

Photochromic materials are widely used to achieve fluorescence photoswitching. Understanding the energy transfer processes occurring in these systems would be an advantage for their use and better optimization of their properties. In this scope, we studied a diarylethene-perylenebisimide (DAE-PBI) dyad that presents a bright red emission and a large ON-OFF contrast, both in solution and in an aqueous suspension of nanoparticles (NPs). Using ultrafast transient absorption spectroscopy, the excited state dynamics was characterized for this dyad in THF solution and compared to its behavior in NPs state. An efficient energy transfer process between the PBI fluorophore and the DAE photochromic unit in its closed form was demonstrated, occurring in a few hundreds of femtoseconds.

Bridged-Imidazole Dimer Exhibiting Three-State Negative Photochromism with a Single Photochromic Unit

Photochromic molecules that can exhibit multiple states of photochromism in a single photochromic unit are considered more attractive than traditional bistable photochromic molecules because they can offer more versatility and control in photoresponsive systems. We have synthesized a negative photochromic 1-(1-naphthyl)pyrenyl-bridged imidazole dimer (NPy-ImD) that has three different isomers: a colorless isomer, 6MR, a blue-colored isomer, 5MR-B, and a red-colored isomer, 5MR-R. NPy-ImD can interconvert between these isomers via a short-lived transient biradical, BR, upon photoirradiation. 5MR-R is the most stable isomer, and the energy levels of 6MR, 5MR-B, and BR are relatively close to each other. The colored isomers 5MR-R and 5MR-B are photochemically isomerized to 6MR via the short-lived BR upon irradiation with blue light and red light, respectively. The absorption bands of 5MR-R and 5MR-B are well separated by more than 150 nm, with a small overlap, which means they can be selectively excited with different light sources, visible light for 5MR-R and NIR light for 5MR-B. The colorless isomer 6MR is formed from the short-lived BR through a kinetically controlled reaction. 6MR and 5MR-B can then be converted to the more stable isomer 5MR-R through a thermodynamically controlled reaction, which is facilitated by the thermally accessible intermediate, BR. Notably, 5MR-R photoisomerizes to 6MR when irradiated with CW-UV light, whereas it photoisomerizes to 5MR-B by a two-photon process when irradiated with nanosecond UV laser pulses.

Excited-state resonance Raman spectroscopy probes the sequential two-photon excitation mechanism of a photochromic molecular switch

Some diarylethene molecular switches have a low quantum yield for cycloreversion when excited by a single photon, but react more efficiently following sequential two-photon excitation. The increase in reaction efficiency depends on both the relative time delay and the wavelength of the second photon. This paper examines the wavelength-dependent mechanism for sequential excitation using excited-state resonance Raman spectroscopy to probe the ultrafast (sub-30 fs) dynamics on the upper electronic state following secondary excitation. The approach uses femtosecond stimulated Raman scattering (FSRS) to measure the time-gated, excited-state resonance Raman spectrum in resonance with two different excited-state absorption bands. The relative intensities of the Raman bands reveal the initial dynamics in the higher-lying states, S_n, by providing information on the relative gradients of the potential energy surfaces that are accessed via secondary excitation. The excited-state resonance Raman spectra reveal specific modes that become enhanced depending on the Raman excitation wavelength, 750 or 400 nm. Many of the modes that become enhanced in the 750 nm FSRS spectrum are assigned as vibrational motions localized on the central cyclohexadiene ring. Many of the modes that become enhanced in the 400 nm FSRS spectrum are assigned as motions along the conjugated backbone and peripheral phenyl rings. These observations are consistent with earlier measurements that showed higher efficiency following secondary excitation into the lower excited-state absorption band and illustrate a powerful new way to probe the ultrafast dynamics of higher-lying excited states immediately following sequential two-photon excitation.

Ultrafast Dynamics of a Molecular Switch from Resonance Raman Spectroscopy: Comparing Visible and UV Excitation

Resonance Raman spectroscopy probes the ultrafast dynamics of a diarylethene (DAE) molecular switch following excitation into the first two optical absorption bands. Mode-specific resonance enhancements for Raman excitation at visible (750-560 nm) and near-UV (420-390 nm) wavelengths compared with the calculated and experimental off-resonance Raman spectrum at 785 nm reveal different Franck-Condon active vibrations for the two electronically excited states. The resonance enhancements at visible wavelengths are consistent with initial motion on the first excited-state that promotes the cycloreversion reaction, whereas the enhancements for excitation at near-UV wavelengths highlight motions involving conjugated backbone and phenyl ring stretching modes that are orthogonal to the reaction coordinate. The results support a mechanism involving rapid internal conversion from the higher-lying state followed by cycloreversion on the first excited state. These observations provide new information about the reactivity of DAE derivatives following excitation in the visible and near-UV.

Future-Oriented Advanced Diarylethene Photoswitches: From Molecular Design to Spontaneous Assembly Systems

Diarylethene (DAE) photoswitch is a new and promising family of photochromic molecules and has shown superior performance as a smart trigger in stimulus-responsive materials. During the past few decades, the DAE family has achieved a leap from simple molecules to functional molecules and developed toward validity as a universal switching building block. In recent years, the introduction of DAE into an assembly system has been an attractive strategy that enables the photochromic behavior of the building blocks to be manifested at the level of the entire system, beyond the DAE unit itself. This assembly-based strategy will bring many unexpected results that promote the design and manufacture of a new generation of advanced materials. Here, recent advances in the design and fabrication of diarylethene as a trigger in materials science, chemistry, and biomedicine are reviewed.

Recent advances in low-power-threshold nonlinear photochromic materials

Incoherent nonlinear photophysical and photochemical processes based on stepwise two-photon absorption (2PA) processes have been recently used in materials science owing to their unique photoresponses beyond one-photon processes and lower power thresholds to induce the processes than those of coherent nonlinear optical processes. Among them, nonlinear photochromic materials have received considerable attention because they exhibit unconventional photoresponses compared with other incoherent nonlinear processes such as low-power-threshold nonlinear photoresponses with unimolecular systems, gated photochemical reactions and oxygen-insensitive nonlinear photoresponses. Nonlinear photochromic materials are important not only for colorimetric materials, but also for emergent materials that can enrich the next-generation society such as dynamic holographic materials, which are promising for three-dimensional displays. In this tutorial review, we introduce low-power-threshold nonlinear photochromic materials using stepwise 2PA processes. First, we explain the fundamental concepts of photochemistry as well as photochromic reactions. We attempt to provide an intuitive understanding of incoherent nonlinear optical processes using these fundamental concepts. Then, we introduce several recent examples and potential applications of nonlinear photochromic materials. This tutorial review is important for understanding the scientific progress related to these fields and provides a simple unified picture of the incoherent nonlinear optical properties of different types of photofunctional materials.

Femtosecond Dynamics of Stepwise Two-Photon Ionization in Solutions as Revealed by Pump-Repump-Probe Detection with Burst Mode of Photoexcitation

Pump-repump-probe spectroscopy with a burst mode of photoexcitation was applied to the direct observation of photoionization dynamics of perylene in the solution phase. The irradiation of the pump pulse train...

Multiphoton Control of 6π Photocyclization via State-Dependent Reactant-Product Correlations

Multiphoton excitation promises opportunities for opening new photochemical reaction pathways and controlling photoproduct distributions. We demonstrate photonic control of the 6π photocyclization of ortho-terphenyl to make 4a,4b-dihydrotriphenylene (DHT). Using pump-repump-probe spectroscopy we show that 1 + 1' excitation to a high-lying reactant electronic state generates a metastable species characterized by a red absorption feature that accompanies a repump-induced depletion in the one-photon trans-dihydro product (trans-DHT); signatures of the new photoproduct are clearer for a structural analogue of the reactant that is sterically inhibited against one-photon cyclization. Quantum-chemical computations support assignment of this species to cis-DHT, which is accessible photochemically along a disrotatory coordinate from high-lying electronic states reached by 1 + 1' excitation. We use time-resolved spectroscopy to track photochemical dynamics producing cis-DHT. In total, we demonstrate that selective multiphoton excitation opens a new photoreaction channel in these photocyclizing reactants by taking advantage of state-dependent correlations between reactant and product electronic states.

Photo-cycloreversion mechanism in diarylethenes revisited: A multireference quantum-chemical study at the ODM2/MRCI level

Photoswitchable diarylethenes (DAEs), over years of intense fundamental and applied research, have been established among the most commonly chosen molecular photoswitches, often employed as controlling units in molecular devices and smart materials. At the same time, providing reliable explanation for their photophysical behavior, especially the mechanism of the photo-cycloreversion transformation, turned out to be a highly challenging task. Herein, we investigate this mechanism in detail by means of multireference semi-empirical quantum chemistry calculations, allowing, for the first time, for a balanced treatment of the static and dynamic correlation effects, both playing a crucial role in DAE photochemistry. In the course of our study, we find the second singlet excited state of double electronic-excitation character to be the key to understanding the nature of the photo-cycloreversion transformation in DAE molecular photoswitches.

Direct observation of o-benzyne formation in photochemical hexadehydro-Diels-Alder (hν-HDDA) reactions

Reactive ortho-benzyne derivatives are believed to be the initial products of liquid-phase [4 + 2]-cycloadditions between a 1,3-diyne and an alkyne via what is known as a hexadehydro-Diels–Alder (HDDA) reaction. The UV/VIS spectroscopic observation of o-benzyne derivatives and their photochemical dynamics in solution, however, have not been reported previously. Herein, we report direct UV/VIS spectroscopic evidence for the existence of an o-benzyne in solution, and establish the dynamics of its formation in a photoinduced reaction. For this purpose, we investigated a bis-diyne compound using femtosecond transient absorption spectroscopy in the ultraviolet/visible region. In the first step, we observe excited-state isomerization on a sub-10 ps time scale. For identification of the o-benzyne species formed within 50–70 ps, and the corresponding photochemical hexadehydro-Diels–Alder (hν-HDDA) reactions, we employed two intermolecular trapping strategies. In the first case, the o-benzyne was trapped by a second bis-diyne, i.e., self-trapping. The self-trapping products were then identified in the transient absorption experiments by comparing their spectral features to those of the isolated products. In the second case, we used perylene for trapping and reconstructed the spectrum of the trapping product by removing the contribution of irrelevant species from the experimentally observed spectra. Taken together, the UV/VIS spectroscopic data provide a consistent picture for o-benzyne derivatives in solution as the products of photo-initiated HDDA reactions, and we deduce the time scales for their formation.

We report the transient ultraviolet/visible absorption spectrum of an o-benzyne species in solution for the first time.

Geometrical Evolution and Formation of the Photoproduct in the Cycloreversion Reaction of a Diarylethene Derivative Probed by Vibrational Spectroscopy

The geometrical evolution of the reactant and formation of the photoproduct in the cycloreversion reaction of a diarylethene derivative were probed using time-resolved absorption spectroscopies in the visible to near-infrared and mid-infrared regions. The time-domain vibrational data in the visible region show that the initially formed Franck-Condon state is geometrically relaxed into the minimum in the excited state potential energy surface, concomitantly with the low-frequency coherent vibrations. Theoretical calculations indicate that the nuclear displacement in this coherent vibration is nearly parallel to that in the geometrical relaxation. Time-resolved mid-infrared spectroscopy directly detected the formation of the open-ring isomer with the same time constant as the decrease of the closed-ring isomer in the excited state minimum. This observation reveals that no detectable intermediate, in which the population is accumulated, is present between the excited closed-ring isomer and the open-ring isomer in the ground state.

Restriction of the conrotatory motion in photo-induced 6π electrocyclic reaction: formation of the excited state of the closed-ring isomer in the cyclization

The electrocyclic reaction dynamics of a photochromic dithiazolylarylene derivative, 2,3-dithiazolylbenzothiophene (DTA) was investigated by using time-resolved transient absorption and fluorescence spectroscopies. The closed-ring isomer of DTA undergoes cycloreversion through the conical intersection mediating the potential energy surfaces of the excited and ground states, which is in agreement with the Woodward–Hoffmann rules for the electrocyclic reactions of 6π electron systems. On the other hand, a large portion of the open-ring isomer undergoes cyclization along the distinct reaction scheme, in which the cyclization takes place in the excited state manifold leading to the formation of the excited state of the closed-ring isomer. The suppression of the geometrical motion of DTA due to the intramolecular interaction could open a new efficient reaction pathway resulting in the formation of the electronically excited state of the product.

Restriction of the molecular geometry opens up a novel pathway in the cyclization reaction of a photochromic dithiazolylarylene derivative.

Photochromic Conjugated Microporous Polymer Manifesting Bio-Inspired pcFRET and Logic Gate Functioning

Design and synthesis of solid-state photochromic materials remain a challenge because of high structural constrain. However, this can be mitigated in attaining structural flexibility by introducing permanent porosity into the system. Here, we report for the first time the design and synthesis of a photochromic conjugated microporous polymer (pcCMP) by assembling photochromic dithienylethene aldehyde and benzene-1,3,5-tricarbohydrazide. The yellow photo-isomer pcCMP-O gets converted to a deep-green photo-isomer pcCMP-C by UV-light irradiation, which can be reverted to pcCMP-O by visible light or thermal treatment. Owing to the thermo-irreversible nature, the pcCMP is found to be suitable for designing an INH functioning logic gate. pcCMP-C shows highly enhanced conductivity (92 times) because of enhanced conjugation compared to pcCMP-O. Furthermore, we demonstrate the bio-inspired photo-switchable pcFRET process by encapsulation of a red-emissive green fluorescent protein (gfp) chromophore analogue into the pcCMP. This material shows high processibility and has been exploited further for secret writing.

A dominant factor of the cycloreversion reactivity of diarylethene derivatives as revealed by femtosecond time-resolved absorption spectroscopy

Dynamics of the cycloreversion reaction of a photochromic diarylethene derivative with a small ring-opening reaction yield (∼1%) was investigated by using femtosecond transient absorption spectroscopy. The reaction rate constant and activation barrier on the reaction coordinate were quantitatively analyzed on the basis of the temperature and excitation wavelength dependencies of the reaction yield and excited state dynamics. From the comparison of the present results with those in a more reactive derivative, we concluded that a key factor regulating the overall reaction yield is the branching ratio at the conical intersection where the excited state population is split into the product and the initial reactant. The excitation wavelength dependence of the dynamics indicated that the geometrical relaxation and vibrational cooling proceed in a few picosecond time scale behind the cycloreversion process, and the vibrational excess energy assists the molecule to climb up the energy barrier.

Photochromic Diarylethenes Designed for Surface Deposition: From Self-Assembled Monolayers to Single Molecules

The efficient switching that can occur between two stable isomers of diarylethenes makes them particularly promising targets for opto- and molecular electronics. To examine these classes of molecules for electronics applications, they have been subjected to a series of scanning tunneling microscopy (STM) experiments, which are the focus of this Review. A brief introduction to the chemical design of diarylethenes in terms of their switching capabilities along with the basics of STM are presented. Next, initial STM studies on these compounds under ambient conditions are discussed. An overview of how molecular design affects the isomerization and self-assembly of diarylethenes at the solid-liquid interface as investigated by STM is then presented, as well as single-molecule studies under ultrahigh vacuum. The last section presents further prospects for molecular design in the field.

Core structure dependence of cycloreversion dynamics in diarylethene analogs

Increased core rigidity in diarylethene-type photoswitches results in shallower excited-state potential energy surfaces and faster funneling towards the conical intersections from which cycloreversion and nonreactive deactivation occur.

Multiphoton-gated cycloreversion reaction of a fluorescent diarylethene derivative as revealed by transient absorption spectroscopy

The one- and two-photon cycloreversion reactions of a fluorescent diarylethene derivative with oxidized benzothiophene moieties were investigated by means of ultrafast laser spectroscopy. Femtosecond transient absorption spectroscopy under the one-photon excitation condition revealed that the excited closed-ring isomer is simply deactivated into the initial ground state with a time constant of 2.6 ns without remarkable cycloreversion, the results of which are consistent with the very low cycloreversion reaction yield (<10-5) under steady-state light irradiation. On the other hand, an efficient cycloreversion reaction was observed under irradiation with a picosecond laser pulse at 532 nm. The excitation intensity dependence of the cycloreversion reaction indicates that a highly excited state attained by the stepwise two-photon absorption is responsible for the marked increase of the cycloreversion reaction, and the quantum yield at the highly excited state was estimated to be 0.018 from quantitative analysis, indicating that the reaction is enhanced by a factor of >1800.

Photoionization and trans-to-cis isomerization of β-cyclodextrin-encapsulated azobenzene induced by two-color two-laser-pulse excitation

Azobenzene (1) and the complex resulting from the incorporation of 1 with cyclodextrin (1/CD) are attractive for light-driven applications such as micromachining and chemical biology tools. The highly sensitive photoresponse of 1 is crucial for light-driven applications containing both 1 and 1/CD to reach their full potential. In this study, we investigated the photoionization and trans-to-cis isomerization of 1/CD induced by one- and two-color two-laser pulse excitation. Photoionization of 1/CD, which was induced by stepwise two-photon absorption, was observed using laser pulse excitation at 266nm. Additionally, simultaneous irradiation with 266 and 532nm laser pulses increased the trans-to-cis isomerization yield (Υ_t→c) by 27%. It was concluded that the increase in Υ_t→c was caused by the occurrence of trans-to-cis isomerization in the higher-energy singlet state (S_n), which was reached by S₁→S_n transition induced by laser pulse excitation at 532nm. The results of this study are potentially applicable in light-driven applications such as micromachining and chemical biology tools.