Hybrid Au–Ag Nanostructures for Enhanced Plasmon-Driven Catalytic Selective Hydrogenation through Visible Light Irradiation and Surface-Enhanced Raman Scattering

Morphology and optical properties of Au-Ag hybrid nanoparticles regulation and its ultra-sensitive SERS immunoassay detection in carbohydrate antigen 19-9

The development of an ultra-sensitive detection method for carbohydrate antigen 19-9 (CA19-9) is very important for the early diagnosis of pancreatic cancer. In this work, we developed a new strategy to achieve a variety of Au-Ag hybrid nanoparticles from janus to core-satellite which is controlled by the volume of AgNO3 and the concentration of benzimidazolecarboxylic acid (MBIA). With the volume of AgNO3 increased, Au-Ag hybrid nanoparticles changed from janus to core-satellite and the characteristic absorption peak showed two opposite trends. The size and number of Ag islands were determined by the concentration of MBIA. Au-Ag core-satellites nanoparticles with a large number of small-sized Ag have the highest SERS intensity. Then we used them as SERS nanotags and Au-Polystyrene nanospheres modified by captured anti-CA19-9 antibody as solid substrates to realize the ultra-sensitive detection of CA19-9 with a low limit of detection of 1.25 × 10-6 IU/mL and a wide linear range of 1.00 × 10-5 -1.00 × 104 IU/mL. This work not only demonstrates that MBIA and AgNO3 were the key factors in the growth of Au-Ag hybrid nanoparticles from 2D to 3D structure but also supplies an ultra-sensitive detection method for CA19-9 which has a potential practicability in the clinical early diagnoses of pancreatic cancer.

Multi-Shell Nanourchin-Integrated Dual Mode Lateral Flow Immunoassay for Sensitive and Rapid Detection of Clinical Cardiac Myosin-Binding Protein C

Cardiac myosin-binding protein C (cMyBP-C) is a novel cardiac marker of acute myocardial infarction (AMI) and acute cardiac injuries (ACI). Construction of point-of-care testing techniques capable of sensing cMyBP-C with high sensitivity and precision is urgently needed. Herein, we synthesized an Au@NGQDs@Au/Ag multi-shell nanoUrchins (MSNUs), and then applied it in a colorimetric/SERS dual-mode immunoassay for detection of cMyBP-C. The MSNUs displayed superior stability, colorimetric brightness, and SERS enhancement ability with an enhanced factor of 5.4 × 109, which were beneficial to improve the detection capability of test strips. The developed MSNU-based test strips can achieve an ultrasensitive immunochromatographic assay of cMyBP-C in both colorimetric and SERS modes with the limits of detection as low as 19.3 and 0.77 pg/mL, respectively. Strikingly, this strip was successfully applied to analyze actual plasma samples with significantly better sensitivity, negative predictive value, and accuracy than commercially available gold test strips. Notably, this method possessed a wide range of application scenarios via combining with a color recognizer application named Color Grab on the smartphone, which can meet various needs of different users. Overall, our MSNU-based test strip as a mobile health monitoring tool shows excellent sensitivity, reproducibility, and rapid detection of the cMyBP-C, which holds great potential for the early clinic diagnosis of AMI and ACI.

Synthesis of Au@Ag core-shell nanocubes with finely tuned shell thicknesses for surface-enhanced Raman spectroscopic detection

In this work, we describe a facile method for generating monodisperse Au@Ag core-shell nanocubes with well-controlled size and fine-tuned Ag shell thicknesses. In this synthesis method, Au nanocubes were prepared via the seed-mediated growth method. Then, Au@Ag nanocubes with the core-shell structure were prepared separately by reducing AgNO3 with AA using as-prepared Au nanocubes as seeds. The thickness of Ag shells could be finely tuned from 3.6 nm to 10.0 nm by varying the concentration of the AgNO3 precursor. By investigating the localized surface plasmon resonance (LSPR) properties of Au@Ag nanocubes in relation to the thickness of the Ag shell, we found that the intensity of the characteristic peak of Ag gradually increases and that of Au gradually decreases as the thickness of the Ag shell increases. Additionally, surface-enhanced Raman scattering (SERS) properties of Au@Ag core-shell nanocubes were evaluated using rhodamine 6G (R6G) as the probe molecule. Interestingly, Au@Ag nanocubes exhibit efficient SERS intensities compared to the Au nanocubes, and Ag shell with a thickness of about 8.4 nm exhibits the optimal SERS activity. In addition, our results also demonstrated that Au@Ag nanocubes with an Ag shell thickness of 8.4 nm exhibited high SERS sensitivity and are capable of probing the analyte down to 10-12 M. The results obtained here suggest that Au@Ag core-shell nanocubes might serve as a nanoprobe for SERS-based analytical and biosensing applications.

Construction of Ultrathin BiVO4-Au-Cu2O Nanosheets with Multiple Charge Transfer Paths for Effective Visible-Light-Driven Photocatalytic Degradation of Tetracycline

In this study, unique BiVO4-Au-Cu2O nanosheets (NSs) are well designed and multiple charge transfer paths are consequently constructed. The X-ray photoelectron spectroscopy measurement during a light off-on-off cycle and redox capability tests of the photo-generated charge carriers confirmed the formation of Z-scheme heterojunction, which can facilitate the charge carrier separation and transfer and maintain the original strong redox potentials of the respective component in the heterojunction. The ultrathin 2D structure of the BiVO4 NSs provided sufficient surface area for the photocatalytic reaction. The local surface plasmon resonance (LSPR) effect of the electron mediator, Au NPs, enhanced the light absorption and promoted the excitation of hot electrons. The multiple charge transfer paths effectively promoted the separation and transfer of the charge carrier. The synergism of the abovementioned properties endowed the BiVO4-Au-Cu2O NSs with satisfactory photocatalytic activity in the degradation of tetracycline (Tc) with a removal rate of ≈80% within 30 min under visible light irradiation. The degradation products during the photocatalysis are confirmed by using ultra-high performance liquid chromatography-mass spectrometry and the plausible degradation pathways of Tc are consequently proposed. This work paves a strategy for developing highly efficient visible-light-driven photocatalysts with multiple charge transfer paths for removing organic contaminants in water.

Improved Surface-Enhanced Raman Scattering Performance of 2D Ti3C2Tx MXene Embedded in PVDF Film Enabled by Photoinduction and Electric Field Modulation

In this study, we introduce a synergistic approach to enhance the surface-enhanced Raman scattering (SERS) signal in two-dimensional (2D) MXene through photo-irradiation and electric field modulation. Our methodology involves the integration of 2D Ti3C2Tx MXene with piezoelectric polyvinylidene fluoride (PVDF) polymer, resulting in the creation of a free-standing, flexible composite film. On this composite film, a thin layer of Au was deposited. Our flexible substrate was able to sense methylene blue (MB), crystal violet (CV), 4-aminothiophenol (ATP), and melamine. The SERS substrate exhibits low detection limit of 10-8 M MB with a 6.7 × 106 enhancement factor (EF). The SERS substrate enables picomolar (pM) detection sensitivity for CV molecules with an EF of 9.2 × 109. Furthermore, the introduction of photo-irradiation leads to an additional ∼3.5-fold enhancement in the SERS signal, which is attributed to the altered work function and defects. The application of mechanical force to the piezoelectric PVDF/Ti3C2Tx film results in a ∼4.5-fold boost in SERS signal due to mechanical force-induced electrical energy. The fabrication strategy employed here for producing a flexible piezoelectric PVDF/Ti3C2Tx film holds significant promise for expanding the potential application of 2D MXene in rapid, on-site sensing scenarios.

Effects of Nanowire Doping on Plasmon-Enhanced N2 Dissociation

Doping a transition metal element into plasmonic systems can tune the optical properties of the system, which will potentially facilitate the plasmon-enhanced catalytic process. In this study, we applied the linear-response time-dependent density functional theory (LR-TDDFT) method with real-time electron dynamics and mean-field Ehrenfest dynamics methods to computationally investigate the effects of doping silver nanowires on plasmon-enhanced N2 dissociation. We calculated the absorption spectra for different doped systems, applied an external electric field to the system, and performed mean-field Ehrenfest dynamics to examine how plasmonic excitation will affect the N2 activation or dissociation. In addition, we also studied how the transition metal dopant affects the system's electronic structure and potential energy surface.

Photo-enhanced dehydrogenation of formic acid on Pd-based hybrid plasmonic nanostructures

Coupling visible light with Pd-based hybrid plasmonic nanostructures has effectively enhanced formic acid (FA) dehydrogenation at room temperature. Unlike conventional heating to achieve higher product yield, the plasmonic effect supplies a unique surface environment through the local electromagnetic field and hot charge carriers, avoiding unfavorable energy consumption and attenuated selectivity. In this minireview, we summarized the latest advances in plasmon-enhanced FA dehydrogenation, including geometry/size-dependent dehydrogenation activities, and further catalytic enhancement by coupling local surface plasmon resonance (LSPR) with Fermi level engineering or alloying effect. Furthermore, some representative cases were taken to interpret the mechanisms of hot charge carriers and the local electromagnetic field on molecular adsorption/activation. Finally, a summary of current limitations and future directions was outlined from the perspectives of mechanism and materials design for the field of plasmon-enhanced FA decomposition.

Fabrication of heterogeneous bimetallic nanochains through photochemical welding for promoting the electrocatalytic hydrogen evolution reaction

Heterogeneous bimetallic nanochains (NCs) have gained significant attention in the field of catalysis due to their abundant active sites, multi-component synergistic catalytic, and exotic electronic structures. Here, we present a novel approach to synthesize one-dimensional heterogeneous bimetallic nanochains using a local surface plasmon resonance (LSPR) based strategy of liquid-phase photochemical welding method containing self-assembly and subsequent welding processes. Initially, we introduce additives that facilitate the self-assembly and alignment of Au nanoparticles (NPs) into orderly lines. Subsequently, the LSPR effect of the Au NPs is stimulated by light, enabling the second metal precursor to overcome the energy barrier and undergo photodeposition in the gap between the arranged Au NPs, thereby connecting the nano-metal particles. This strategy can be extended to the photochemical welding of Au NPs-Ag and Au NRs. Using electrocatalytic hydrogen evolution reaction (HER) as a proof-of-concept application, the obtained one-dimensional structure of Au5Pt1 NCs exhibit promoted HER performances, where the mass activity of the Au5Pt1 nanochains is found to be 4.8 times higher than that of Au5Pt1 NPs and 10.4 times higher than that of commercial 20 wt% Pt/C catalysts. The promoted HER performance is benefited from the electron conduction ability and abundant active sites.

Infrared Light-Induced Anomalous Defect-Mediated Plasmonic Hot Electron Transfer for Enhanced Photocatalytic Hydrogen Evolution

Efficient utilization of infrared (IR) light, which occupies almost half of the solar energy, is an important but challenging task in solar-to-fuel transformation. Herein, we report the discovery of CuS@ZnS core@shell nanocrystals (CSNCs) with strong localized surface plasmon resonance (LSPR) characteristics in the IR light region showing enhanced photocatalytic activity in hydrogen evolution reaction (HER). A unique "plasmon-induced defect-mediated carrier transfer" (PIDCT) at the heterointerfaces of the CSNCs divulged by time-resolved transient spectroscopy enables producing a high quantum yield of 29.2%. The CuS@ZnS CSNCs exhibit high activity and stability in H₂ evolution under near-IR light irradiation. The HER rate of CuS@ZnS CSNCs at 26.9 μmol h^-1 g^-1 is significantly higher than those of CuS NCs (0.4 μmol h^-1 g^-1) and CuS/ZnS core/satellite heterostructured NCs (15.6 μmol h^-1 g^-1). The PIDCT may provide a viable strategy for the tuning of LSPR-generated carrier kinetics through controlling the defect engineering to improve photocatalytic performance.

Particle Attachment Growth of Au@Ag Core-Shell Nanocuboids

In the templated synthesis of colloidal core-shell nanoparticles, the monomer attachment growth mechanism has been widely accepted to describe the growth process of shells. In this work, by using advanced transmission electron microscope techniques, we directly observe two alternative particle attachment growth pathways that dominate the growth of Au@Ag core-shell nanocuboids. One pathway involves the in situ reduction of AgCl nanoparticles attached to Au nanorods and the subsequent epitaxial growth of the Ag shell. The other pathway involves the adherence of Ag-AgCl Janus nanoparticles to Au nanorods with random orientations, followed by nanoparticle redispersion and the resulting formation of epitaxial Ag shells on the Au nanorods. The particle-mediated growth of Ag shells is accompanied by the redispersion of surface atoms, tending to form a uniform structure. The validation of the particle attachment growth processes at the atomic scale provides a new mechanistic understanding of core-shell nanostructure synthesis.

Surfactant-Tunable Nanoparticle Assembly via a Template-Directed Strategy

Nanoparticle (NP) self-assembly from suspension evaporation has been a topic of interest in recent times to fabricate a solid-state structure with diverse functions. We present a simple and facile evaporation-induced strategy for the formation of NP arrays on a flat substrate utilizing a template-directed sandwich system. The lithographic features assist the assembly of the typical nanoparticles (NPs), including SiO₂, QDs@PS FMs, and QDs, on the top into circle, stripe, triangle, or square geometries with a fixed width of 2 μm. Additionally, an anionic surfactant, sodium dodecyl sulfonate (SDS), is incorporated into a negatively charged, hydrophilic SiO₂ dispersion to govern the aggregation and self-assembly of NPs, fine tuning the morphologies of the residual structures on the substrate. SDS is attributed to modify the nature of SiO₂ NPs to be hydrophobic, increase the hydrophobic attraction, dominating particle-particle and particle-interface interactions, and strengthen the particle-particle repulsive electrostatic force that results in the reduction of SiO₂ NPs trapped in the separated colloidal suspension drop. Thus, using the SDS surfactant with the concentration ranging from 0 to 1 wt %, the obtained well-ordered SiO₂ NP pattern packing on the substrate varies from six layers to one layer.

Active Site Engineering on Plasmonic Nanostructures for Efficient Photocatalysis

Plasmonic nanostructures have shown immense potential in photocatalysis because of their distinct photochemical properties associated with tunable photoresponses and strong light-matter interactions. The introduction of highly active sites is essential to fully exploit the potential of plasmonic nanostructures in photocatalysis, considering the inferior intrinsic activities of typical plasmonic metals. This review focuses on active site-engineered plasmonic nanostructures with enhanced photocatalytic performance, wherein the active sites are classified into four types (i.e., metallic sites, defect sites, ligand-grafted sites, and interface sites). The synergy between active sites and plasmonic nanostructures in photocatalysis is discussed in detail after briefly introducing the material synthesis and characterization methods. Active sites can promote the coupling of solar energy harvested by plasmonic metal to catalytic reactions in the form of local electromagnetic fields, hot carriers, and photothermal heating. Moreover, efficient energy coupling potentially regulates the reaction pathway by facilitating the excited state formation of reactants, changing the status of active sites, and creating additional active sites using photoexcited plasmonic metals. Afterward, the application of active site-engineered plasmonic nanostructures in emerging photocatalytic reactions is summarized. Finally, a summary and perspective of the existing challenges and future opportunities are presented. This review aims to deliver some insights into plasmonic photocatalysis from the perspective of active sites, expediting the discovery of high-performance plasmonic photocatalysts.

High Photocatalytic Hydrogen Production of Ag@TiO2 with Different Sizes by Simple Chemical Synthesis

The photocatalytic enhancement of sliver-based metals compounded with semiconductor materials has been demonstrated. However, there are relatively few studies on the effect of particle size in the system on photocatalytic performance. In this paper, silver nanoparticles of two different sizes, 25 and 50 nm, were prepared by a wet chemical method and subsequently sintered to obtain a photocatalyst with a core-shell structure. The photocatalyst Ag@TiO₂-50/150 prepared in this study has a hydrogen evolution rate as high as 4538.90 μmol·g^-1·h^-1. It is interesting to find that when the ratio of silver core size to composite size is 1:3, the hydrogen yield is almost not affected by the silver core diameter, and the hydrogen production rate is basically the same. In addition, the rate of hydrogen precipitation in air for 9 months was still more than 9 times those of previous studies. This provides a new idea for the study of the oxidation resistance and stability of photocatalysts.

Z-Scheme CuOx/Ag/TiO2 Heterojunction as Promising Photoinduced Anticorrosion and Antifouling Integrated Coating in Seawater

In the marine environment, steel materials usually encounter serious problems with chemical or electrochemical corrosion and fouling by proteins, bacteria, and other marine organisms. In this work, a green bifunctional Z-scheme CuO_x/Ag/P25 heterostructure coating material was designed to achieve the coordination of corrosion prevention and antifouling by matching the redox potential of the reactive oxygen species and the corrosion potential of 304SS. When CuO_x/Ag/P25 heterostructure was coupled with the protected metal, the open circuit potential under illumination negatively shifted about 240 mV (vs. Ag/AgCl) and the photoinduced current density reached 16.6 μA cm^-2. At the same time, more reactive oxygen species were produced by the Z-shape structure, and then the photocatalytic sterilization effect was stronger. Combined with the chemical sterilization of Ag and the oxide of Cu, the bacterial survival rate of CuO_x/Ag/P25 was low (0.006%) compared with the blank sample. This design provides a strategy for developing green dual-functional coating materials with photoelectrochemical anticorrosion and antifouling properties.

Plasmonic/magnetic nanoarchitectures: From controllable design to biosensing and bioelectronic interfaces

Controllable design of the nanocrystal-assembled plasmonic/magnetic nanoarchitectures (P/MNAs) inspires abundant methodologies to enhance light-matter interactions and control magnetic-induced effects by means of fine-tuning the morphology and ordered packing of noble metallic or magnetic building blocks. The burgeoning development of multifunctional nanoarchitectures has opened up broad range of interdisciplinary applications including biosensing, in vitro diagnostic devices, point-of-care (POC) platforms, and soft bioelectronics. By taking advantage of their customizability and efficient conjugation with capping biomolecules, various nanoarchitectures have been integrated into high-performance biosensors with remarkable sensitivity and versatility, enabling key features that combined multiplexed detection, ease-of-use and miniaturization. In this review, we provide an overview of the representative developments of nanoarchitectures that being built by plasmonic and magnetic nanoparticles over recent decades. The design principles and key mechanisms for signal amplification and quantitative sensitivity have been explored. We highlight the structure-function programmability and prospects of addressing the main limitations for conventional biosensing strategies in terms of accurate selectivity, sensitivity, throughput, and optoelectronic integration. State-of-the-art strategies to achieve affordable and field-deployable POC devices for early multiplexed detection of infectious diseases such as COVID-19 has been covered in this review. Finally, we discuss the urgent yet challenging issues in nanoarchitectures design and related biosensing application, such as large-scale fabrication and integration with portable devices, and provide perspectives and suggestions on developing smart biosensors that connecting the materials science and biomedical engineering for personal health monitoring.

Multibranched Au-Ag-Pt Nanoparticle as a Nanozyme for the Colorimetric Assay of Hydrogen Peroxide and Glucose

Many studies have recently produced artificial enzymes with metal nanoparticles (NPs) to overcome the limitations of natural enzymes, such as low stability, high cost, and storage problems. In particular, gold NPs exhibit peroxidase-like activity and are strongly influenced by external parameters, such as pH, temperature, size, shape, and functional layer, which change the enzyme activity. Here, chitosan-capped multibranched Au-Ag-Pt NPs (CCNPs) that mimic peroxidase were synthesized using various peroxidase-mimicking strategies. The results demonstrated that enzyme activity sequentially increased because of the multibranched Au-Ag NPs coated with Pt and chitosan. The enzyme activity of the particle was evaluated through the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB), which causes a color change into blue. This change was observable with the naked eye and could be used practically. The color change depended on the concentration of hydrogen peroxide (H₂O₂), and it was shown that the CCNPs could be applied to measure H₂O₂ with a limit of detection (LOD) of 0.054 mM. Furthermore, with glucose oxidase, the CCNPs can be used for glucose detection with an LOD of 0.289 mM. Also, the potential of the CCNP application in human serum was shown through the serum test. Thus, this study suggested the utilization of the multibranched Au-Ag-Pt NPs that mimic the peroxidase activity of natural enzymes and the possibility of application in various biological analyses.

SERS spectral evolution of azo-reactions mediated by plasmonic Au@Ag core-shell nanorods

The mechanism and application of localized surface plasmon resonance induced photocatalytic reactions remain an issue of interest. In this work, we used Au@Ag core-shell nanorods as a platform for plasmon-driven photocatalysis, which was in situ investigated by surface-enhanced Raman scattering (SERS) spectroscopy. The para-aminothiophenol (PATP) and para-nitrothiophenol (PNTP) adsorbed on the nanorods were irradiated with different excitation wavelengths (633 nm, 785 nm) and transformed into 4,4'-dimercaptoazobenzene (DMAB) as evidenced by the emerging Raman peaks at 1142 cm^-1, 1390 cm^-1, 1440 cm^-1, and 1477 cm^-1, corresponding to hot carrier dominated oxidation of PATP and reduction of PNTP. Preliminary azo-reaction kinetics and in situ SERS measurements were conducted by comparing the relative intensity ratio of SERS peaks at 1440 cm^-1 (DMAB stretching of N[double bond, length as m-dash]N) and 1080 cm^-1 (C-S stretching of PATP and PNTP). These results indicate that the catalytic efficiency was dominated by the excitation wavelength as well as the resonance condition between the plasmon band of the nanorods and the excitation line. As a proof of concept, the Au@Ag core-shell nanorods were used to catalyze 4-nitrophenol molecules, and 4-hydroxyazobenzene molecules as the product were confirmed by in situ SERS spectra as well theoretical predictions, showing potential in plasmon driven catalysis and degradation of organic molecules.

Plasmonic Metal/Semiconductor Heterostructure for Visible Light-Enhanced H2 Production

A plasmonic Ag/Bi₂WO₆ heterostructure, having Ag NPs deposited on Bi₂WO₆, is obtained by a hydrothermal and photodeposition method. The synthesized Ag/Bi₂WO₆ composite exhibits strong visible light absorption with a localized surface plasmon resonance (LSPR) and shows an enhanced photoabsorption property. It is demonstrated that such a Ag/Bi₂WO₆ heterostructure shows excellent plasmon-enhanced photocatalytic activity in the dehydrogenation of ammonia borane (NH₃BH₃) solution under visible light irradiation, which is due to the results from the synergetic effect between Ag NPs and emerging W⁵⁺ ions. More importantly, the performance of a Ag/Bi₂WO₆ hybrid is almost eight times higher than that of sole Bi₂WO₆ nanosheets. The introduction of LSPR of Ag in Bi₂WO₆ improves the electrical conductivity of the composite and lowers the recombination rate of charge carriers. This study opens up the opportunity of rationally fabricating plasmonic metal/semiconductor heterostructures for highly efficient photocatalysis.

Single-molecule nano-optoelectronics: insights from physics

Single-molecule optoelectronic devices promise a potential solution for miniaturization and functionalization of silicon-based microelectronic circuits in the future. For decades of its fast development, this field has made significant progress in the synthesis of optoelectronic materials, the fabrication of single-molecule devices and the realization of optoelectronic functions. On the other hand, single-molecule optoelectronic devices offer a reliable platform to investigate the intrinsic physical phenomena and regulation rules of matters at the single-molecule level. To further realize and regulate the optoelectronic functions toward practical applications, it is necessary to clarify the intrinsic physical mechanisms of single-molecule optoelectronic nanodevices. Here, we provide a timely review to survey the physical phenomena and laws involved in single-molecule optoelectronic materials and devices, including charge effects, spin effects, exciton effects, vibronic effects, structural and orbital effects. In particular, we will systematically summarize the basics of molecular optoelectronic materials, and the physical effects and manipulations of single-molecule optoelectronic nanodevices. In addition, fundamentals of single-molecule electronics, which are basic of single-molecule optoelectronics, can also be found in this review. At last, we tend to focus the discussion on the opportunities and challenges arising in the field of single-molecule optoelectronics, and propose further potential breakthroughs.

High-Throughput Fabrication of Triangular Nanogap Arrays for Surface-Enhanced Raman Spectroscopy

Squeezing light into nanometer-sized metallic nanogaps can generate extremely high near-field intensities, resulting in dramatically enhanced absorption, emission, and Raman scattering of target molecules embedded within the gaps. However, the scarcity of low-cost, high-throughput, and reproducible nanogap fabrication methods offering precise control over the gap size is a continuing obstacle to practical applications. Using a combination of molecular self-assembly, colloidal nanosphere lithography, and physical peeling, we report here a high-throughput method for fabricating large-area arrays of triangular nanogaps that allow the gap width to be tuned from ∼10 to ∼3 nm. The nanogap arrays function as high-performance substrates for surface-enhanced Raman spectroscopy (SERS), with measured enhancement factors as high as 10⁸ relative to a thin gold film. Using the nanogap arrays, methylene blue dye molecules can be detected at concentrations as low as 1 pM, while adenine biomolecules can be detected down to 100 pM. We further show that it is possible to achieve sensitive SERS detection on binary-metal nanogap arrays containing gold and platinum, potentially extending SERS detection to the investigation of reactive species at platinum-based catalytic and electrochemical surfaces.

1D Colloidal chains: recent progress from formation to emergent properties and applications

Integrating nanoscale building blocks of low dimensionality (0D; i.e., spheres) into higher dimensional structures endows them and their corresponding materials with emergent properties non-existent or only weakly existent in the individual building blocks. Constructing 1D chains, 2D arrays and 3D superlattices using nanoparticles and colloids therefore continues to be one of the grand goals in colloid and nanomaterial science. Amongst these higher order structures, 1D colloidal chains are of particular interest, as they possess unique anisotropic properties. In recent years, the most relevant advances in 1D colloidal chain research have been made in novel synthetic methodologies and applications. In this review, we first address a comprehensive description of the research progress concerning various synthetic strategies developed to construct 1D colloidal chains. Following this, we highlight the amplified and emergent properties of the resulting materials, originating from the assembly of the individual building blocks and their collective behavior, and discuss relevant applications in advanced materials. In the discussion of synthetic strategies, properties, and applications, particular attention will be paid to overarching concepts, fresh trends, and potential areas of future research. We believe that this comprehensive review will be a driver to guide the interdisciplinary field of 1D colloidal chains, where nanomaterial synthesis, self-assembly, physical property studies, and material applications meet, to a higher level, and open up new research opportunities at the interface of classical disciplines.

Self-Assembly of Au–Ag Alloy Hollow Nanochains for Enhanced Plasmon-Driven Surface-Enhanced Raman Scattering

In this paper, Au–Ag alloy hollow nanochains (HNCs) were successfully prepared by a template-free self-assembly method achieved by partial substitution of ligands. The obtained Au–Ag alloy HNCs exhibit stronger enhancement as surface-enhanced Raman scattering (SERS) substrates than Au–Ag alloy hollow nanoparticles (HNPs) and Au nanochains substrates with an intensity ratio of about 1.3:1:1. Finite difference time domain (FDTD) simulations show that the SERS enhancement of Au–Ag alloy HNCs substrates is produced by a synergistic effect between the plasmon hybridization effect associated with the unique alloy hollow structure and the strong “hot spot” in the interstitial regions of the nanochains.

Plasmonic Superstructure Arrays Fabricated by Laser Near-Field Reduction for Wide-Range SERS Analysis of Fluorescent Materials

Surface-enhanced Raman scattering (SERS) enables trace-detection for biosensing and environmental monitoring. Optimized enhancement of SERS can be achieved when the energy of the localized surface plasmon resonance (LSPR) is close to the energy of the Raman excitation wavelength. The LSPR can be tuned using a plasmonic superstructure array with controlled periods. In this paper, we develop a new technique based on laser near-field reduction to fabricate a superstructure array, which provides distinct features in the formation of periodic structures with hollow nanoclusters and flexible control of the LSPR in fewer steps than current techniques. Fabrication involves irradiation of a continuous wave laser or femtosecond laser onto a monolayer of self-assembled silica microspheres to grow silver nanoparticles along the silica microsphere surfaces by laser near-field reduction. The LSPR of superstructure array can be flexibly tuned to match the Raman excitation wavelengths from the visible to the infrared regions using different diameters of silica microspheres. The unique nanostructure formed can contribute to an increase in the sensitivity of SERS sensing. The fabricated superstructure array thus offers superior characteristics for the quantitative analysis of fluorescent perfluorooctanoic acid with a wide detection range from 11 ppb to 400 ppm.

Plasmonic Superlattice Membranes Based on Bimetallic Nano-Sea Urchins as High-Performance Label-Free Surface-Enhanced Raman Spectroscopy Platforms

On the basis of an abundance of elemental plasmonic nanocrystals identifiable by their unique morphology and intrinsic optoelectronic properties, it is necessary to rationally tailor the structural parameters to optimize the functionalities of nanoassemblies for application as plasmonic circuits/devices. Among them, the plasmonic superlattice membrane has emerged as a novel optically active metamaterial, which is constructed by nanocrystals at a two-dimensional (2D) plane with a highly ordered structure and strong plasmonic coupling interactions. Here, we report on the fabrication of a novel plasmonic superlattice membrane using bimetallic core-shell nano-sea urchins (Nano-SEUs) as meta-atoms. Under the guidance of soft-ligand balancing in conjugation with drying-mediated self-assembly at the air/water interface, well-defined giant 2D superlattices with total lateral dimensions of up to 5 mm wide and 80 nm thick have been synthesized, corresponding to an aspect ratio of 62 500. Programmable morphology control over the Nano-SEUs has been achieved in high yield by rationally tuning the spiky branches as well as the thickness of the silver shell, allowing systematic variation of the plasmonic properties of the membrane. Such superlattice membranes exhibited a strong and reproducible surface-enhanced Raman spectroscopy (SERS) signal that originates from interparticle coupling and electric (E)-field enhancement, enabling an enhancement factor of up to 10⁶. We also demonstrated that the fabricated membrane allows the label-free SERS detection of dopamine from 0.1 nM to 1 μM. Thus, this giant Nano-SEU assembled superlattice membrane can be used as a SERS substrate for on-spot biomarker detection, which paves a robust and inexpensive avenue for highly sensitive and reliable biomedical sensing and diagnostics.

g-PAN/g-C3N4 encapsulated Cu nanoparticles with photocatalytic properties and high stability prepared by two-step sintering method

Copper-based photocatalyst has attracted much attention because of its great prospects in photochemical conversion. However, the preparation of highly stable copper-based photocatalysts is a challenge. In this study, copper nanoparticles...

Enhancement of Ti3C2 MXene on Au@Ag/TiO2 for the visible-light-driven photoreduction of nitroaromatics

Au@Ag/TiO2/Ti3C2 exhibits outstanding photoreduction activity at 0 °C because of the combination of efficient hot carrier generation and separation ability in one system.

Ultrathin g-PAN/PANI encapsulated Cu nanoparticles decorated on SrTiO3 with high stability and as an efficient photocatalytic H2 evolution and degradation of 4-nitrophenol under visible-light irradiation

Copper-based photocatalyst has attracted much attention because of its great prospects in photochemical conversion. However, there are still challenges facing the preparation of copper-based photocatalysts that have high catalytic efficiency...

High spin Fe3+-related bonding strength and electron transfer for sensitive and stable SERS detection

The SERS performance of trimetallic MIL-101(FeNiTi) and the spin state of Fe3+ is positively correlated. The SERS enhancement mechanism is explored regarding the bonding strength and charge transfer between molecules and MIL-101.

In situ mass analysis of surface reactions using surface-enhanced Raman spectroscopy covering a wide range of frequencies

Both the structural change and mass change of adsorbates in heterogeneous surface reactions were simultaneously measured in situ using frequency-extended SERS spectroscopy.

Scalable Fabrication of Metallic Nanogaps at the Sub-10 nm Level

Metallic nanogaps with metal-metal separations of less than 10 nm have many applications in nanoscale photonics and electronics. However, their fabrication remains a considerable challenge, especially for applications that require patterning of nanoscale features over macroscopic length-scales. Here, some of the most promising techniques for nanogap fabrication are evaluated, covering established technologies such as photolithography, electron-beam lithography (EBL), and focused ion beam (FIB) milling, plus a number of newer methods that use novel electrochemical and mechanical means to effect the patterning. The physical principles behind each method are reviewed and their strengths and limitations for nanogap patterning in terms of resolution, fidelity, speed, ease of implementation, versatility, and scalability to large substrate sizes are discussed.

MoS2-based multiple surface plasmonic coupling for enhanced surface-enhanced Raman scattering and photoelectrocatalytic performance utilizing the size effect

MoS₂-based heterostructures have received increasing attention for not only surface-enhanced Raman scattering (SERS) but also for enhanced photoelectrocatalytic (PEC) performance. This study presents a hydrothermal method for preparing vertical MoS₂ nanosheets composed of in situ grown AuNPs with small size and chemically reduced AgNPs with large size to achieve the synergistic enhancement of SERS and PEC properties owing to the size effect of the plasmonic structure. Compared with pristine MoS₂ nanosheets and unitary AuNPs or AgNPs composited with MoS₂ nanosheets, the ternary heterostructure exhibited the strongest electromagnetic field and surface plasmon coupling, which was confirmed by finite-difference time-domain (FDTD) simulation and absorption spectra. In addition, the experimental results confirmed the outstanding SERS enhancement with an EF of 1.1×10⁹, and the most efficient hydrogen evolution reaction (HER) activity with a sensitive photocurrent response, attributing to the multiple surface plasmonic coupling effects of the Au-Ag bimetal and efficient charge-transfer process between MoS₂ and the bimetal. That is, it provides a robust method for developing multi-size bimetal-semiconductor complex nanocomposites for high-performance SERS sensors and PEC applications.

Plasmonic Coupling Architectures for Enhanced Photocatalysis

Plasmonic photocatalysis is a promising approach for solar energy transformation. Comparing with isolated metal nanoparticles, the plasmonic coupling architectures can provide further strengthened local electromagnetic field and boosted light-harvesting capability through optimal control over the composition, spacing, and orientation of individual nanocomponents. As such, when integrated with semiconductor photocatalysts, the coupled metal nanostructures can dramatically promote exciton generation and separation through plasmonic-coupling-driven charge/energy transfer toward superior photocatalytic efficiencies. Herein, the principles of the plasmonic coupling effect are presented and recent progress on the construction of plasmonic coupling architectures and their integration with semiconductors for enhanced photocatalytic reactions is summarized. In addition, the remaining challenges as to the rational design and utilization of plasmon coupling structures are elaborated, and some prospects to inspire new opportunities on the future development of plasmonic coupling structures for efficient and sustainable light-driven reactions are raised.

Localized surface plasmon resonance induced assembly of bimetal nanochains

Bimetal nanochains (NCs) are attracting increasing attention in the fields of catalysis and electrocatalysis due to the synergistic effects in electronic and optical properties, but the fabrication of bimetal NCs remains challenging. Here, we report a general strategy named "nucleation in the irradiation then growth in the dark" for the preparation of Au/M (second metal) NCs. In the irradiation stage, the localized surface plasmon resonance (LSPR) effect of Au NPs is excited to overcome the nucleation energy barrier for the deposition of second metals (Pt, Ag and Pd). In the followed dark process, the preferential growth of second metals on the existed nucleus leads to the formation of nanochain rather than the core/shell nanostructure. In the model reaction of electrocatalytic hydrogen evolution, the optimized Au/Pt NCs showed much better performance compared with the commercial Pt/C.

Site-Selective Photosynthesis of Ag-AgCl@Au Nanomushrooms for NIR-II Light-Driven O2- and O2•--Evolving Synergistic Photothermal Therapy against Deep Hypoxic Tumors

Light-driven endogenous water oxidation has been considered as an attractive and desirable way to obtain O2 and reactive oxygen species (ROS) in the hypoxic tumor microenvironment. However, the use of a second near-infrared (NIR-II) light to achieve endogenous H2O oxidation to alleviate tumor hypoxia and realize deep hypoxic tumor phototherapy is still a challenge. Herein, novel plasmonic Ag-AgCl@Au core-shell nanomushrooms (NMs) were synthesized by the selective photodeposition of plasmonic Au at the bulge sites of the Ag-AgCl nanocubes (NCs) under visible light irradiation. Upon NIR-II light irradiation, the resulting Ag-AgCl@Au NMs could oxidize endogenous H2O to produce O2 to alleviate tumor hypoxia. Almost synchronously, O2 could react with electrons on the conduction band of the AgCl core to generate superoxide radicals (O2•-)for photodynamic therapy. Moreover, Ag-AgCl@Au NMs with an excellent photothermal performance could further promote the phototherapy effect. In vitro and in vivo experimental results show that the resulting Ag-AgCl@Au NMs could significantly improve tumor hypoxia and enhance phototherapy against a hypoxic tumor. The present study provides a new strategy to design H2O-activatable, O2- and ROS-evolving NIR II light-response nanoagents for the highly efficient and synergistic treatment of deep O2-deprived tumor tissue.

Plasmonic Hot Hole Extraction from CuS Nanodisks Enables Significant Acceleration of Oxygen Evolution Reactions

Localized surface plasmon resonance (LSPR) is well known for its unique ability to tune the reactivity of plasmonic materials via photoexcitation; however, it is still an open question as to whether plasmonic holes can be directly extracted to drive valuable chemical reactions. Herein we give an affirmative answer by reporting an illumination-enhanced oxygen evolution reaction (OER) using CuS nanodisks (NDs) alone as the electrocatalyst. Impressively, under 1221 nm laser or xenon lamp illumination, an unprecedented reduction of OER overpotential was observed on the CuS ND-coated electrodes. Transient absorption combined with Mott-Schottky measurements disclosed that near-infrared (NIR) irradiation generated abundant hot holes from LSPR damping in the CuS NDs accounting for the remarkable OER performance enhancement. This is the first report on the direct utilization of plasmonic hot holes in CuS nanomaterials for boosting OER performance, opening up a new route to designing NIR-active photocatalysts/electrocatalysts by exploiting the unique LSPR properties.

Dual Active Center-Assembled Cu31S16-Co9-xNixS8 Heterodimers: Coherent Interface Engineering Induces Multihole Accumulation for Light-Enhanced Electrocatalytic Oxygen Evolution

The design of low-cost yet highly efficient electrocatalysts plays a critical role in energy storage and conversion reactions. The oxygen evolution reaction (OER) is considered a bottleneck of electrochemical water splitting for hydrogen fuel generation. It is still challenging to extract a high density of charge carriers in noble-metal-free alternative catalysts to facilitate sluggish kinetics. Herein, we report the rational design and coherent interface engineering for combining light-harvesting Cu₃₁S₁₆ with electroactive Co_9-xNi_xS₈ (x = 0-9) to form novel Cu₃₁S₁₆-Co_9-xNi_xS₈ heterodimers. By delicately controlling the kinetic growth in a seed-mediated growth method, the bifunctional centers, even with two distinct crystal phases, were integrated into a synergistic architecture, which achieved full-spectrum solar energy capture and light conversion to drive and activate the electrochemical reaction. Benefiting from the well-defined structure, high-quality interface, oriented attachment, and optimal Co/Ni bimetal ratio, Cu₃₁S₁₆-Co_7.2Ni_1.8S₈ produces a dramatically reduced overpotential (242 mV at 10 mA cm^-2) with a shift of 83 mV under visible-light excitation, achieving a 4.5-fold higher turnover frequency than that of its unirradiated Co_7.2Ni_1.8S₈ counterpart. This enhanced performance also far exceeds commercial RuO₂ (358 mV at 10 mA cm^-2) and most nonprecious-metal nanocatalysts. Further mechanistic studies reveal that coherent interface engineering leads to a strong photo/electricity coupling effect and efficient spatial charge separation, which induces sufficient hot holes that eventually accumulate at the electroactive sites to accelerate the multihole-involved OER. This work would open up new opportunities for the fabrication of non-noble metal electrocatalysts and management of charge carriers.

Elucidating the Role of Dissolved Organic Matter and Sunlight in Mediating the Formation of Ag-Au Bimetallic Alloy Nanoparticles in the Aquatic Environment

Elucidating the interactions between metal ions and dissolved organic matter and deciphering mechanisms for their mineralization in the aquatic environment are central to understanding the speciation, transport, and toxicity of nanoparticles (NPs). Herein, we examine the interactions between Ag⁺ and Au³⁺ ions in mixed solutions (χ_Ag = 0.2, 0.5, and 0.8) in the presence of humic acids (HAs) under simulated sunlight; these conditions result in the formation of bimetallic Ag-Au NPs. A key distinction is that the obtained alloy NPs are compositionally and morphologically rather different from NPs obtained from thermally activated dark processes. Photoillumination triggers a distinctive plasmon-mediated process for HA-assisted reductive mineralization of ions to bimetallic alloy NPs which is not observed in its dark thermal reduction counterpart. The initial nucleation of bimetallic NPs is dominated by differences in the cohesive energies of Ag and Au crystal lattices, whereas the growth mechanisms are governed by the strongly preferred incorporation of Ag ions, which stems from their greater photoreactivity. The bimetallic NPs crystallize in shapes governed by the countervailing influence of minimizing free energy through the adoption of Wulff constructions and the energetic penalties associated with twin faults. As such, assessments of the stability and the potential toxic effects of bimetallic NPs arising from their possible existence in aquatic environments will depend sensitively on the origins of their formation.