C-H Functionalization of Amines via Alkene-Derived Nucleophiles through Cooperative Action of Chiral and Achiral Lewis Acid Catalysts: Applications in Enantioselective Synthesis

Lewis Acid-Driven Inverse Hydride Shuttle Catalysis

Inverse hydride shuttle catalysis provides a multicomponent platform for the highly efficient synthesis of alkaloid frameworks with exquisite diastereoselectivity. However, a number of limitations hinder this method, primarily the strict requirement for highly electron-deficient acceptors. Herein, we present a general Lewis acid-driven approach to address this constraint, and have developed two broad strategies enabling the modular synthesis of complex azabicycles that were entirely unattainable using the previous method. The enhanced synthetic flexibility facilitates a streamlined asymmetric cyclization, leading to a concise total synthesis of the alkaloid (-)-tashiromine.

Asymmetric magnesium catalysis for important chiral scaffold synthesis

Magnesium catalysts are widely used in catalytic asymmetric reactions, and a series of catalytic strategies have been developed in recent years. Herein, in this review, we have tried to summarize asymmetric magnesium catalysis for the synthesis of important chiral scaffolds. Several important optically active motifs that are present in classic chiral ligands or natural products synthesized by Mg(II) catalytic methods are briefly discussed. Moreover, the representative mechanisms for different magnesium catalytic strategies, including in situ generated magnesium catalysts, are also shown in relation to synthetic routes for obtaining these important chiral scaffolds.

Redox-neutral α-functionalization of pyrrolidines: facile access to α-aryl-substituted pyrrolidines

α-Aryl-substituted pyrrolidine moiety is found in many natural alkaloids. Starting from pyrrolidine, we were able to synthesize α-aryl-substituted pyrrolidines in one step using quinone monoacetal as the oxidizing agent and DABCO as the base. We also discovered the reaction condition needed to efficiently remove the N-aryl moiety from the α-arylated product. When the above reaction was carried out without the addition of an aryl nucleophile, the reaction of pyrrolidine and quinone monoacetal in 2,2,2-trifluoroethanol afforded octahydro-dipyrroloquinoline in high yield, which has the same skeleton as that of natural product incargranine B.

A Radical Approach for Asymmetric α-C-H Addition of N-Sulfonyl Benzylamines to Aldehydes

Efficient synthesis of enantioenriched amines is of great importance due to their significant synthetic and biological applications. Photoredox-mediated asymmetric α-amino C(sp3)-H functionalization offers an atom-economical and sustainable approach to access chiral amines. However, the development of analogous reactions is in its early stages, generally affording chiral amines with a single stereocenter. Herein, we present a novel synergistic triple-catalysis approach for the asymmetric α-C-H addition of readily available N-sulfonyl amines to aldehydes under mild conditions. This method allows for the efficient synthesis of a diverse array of valuable β-amino alcohols bearing vicinal stereocenters. Unlike previous reports, our protocol employs a radical approach using earth-abundant Cr catalysis. Quinuclidine plays a dual role by facilitating highly selective hydrogen-atom transfer to generate α-amino radicals and promoting the dissociation of the Cr-O bond, which is crucial for the overall catalytic cycle as evidenced by control, NMR, and DFT experiments. Preliminary mechanistic studies, including radical trapping, nonlinear effect, Stern-Volmer plot, kinetic isotope effect, and Hammett plot, offer valuable insights into the reaction pathway.

Electrochemical Vicinal C-H Difunctionalization of Saturated Azaheterocycles

A method to functionalize two vicinal C-H bonds of saturated azaheterocycles is described. The procedure involves subjecting the substrate to a mixture of hydrochloric acid, acetic acid, and acetic anhydride in an undivided electrochemical cell at a constant current, resulting in stereoselective conversion to the corresponding α-acetoxy-β-chloro derivative. The α-position can be readily substituted with a range of other groups, including alkyl, aryl, allyl, alkynyl, alkoxy, or azido functionalities. Furthermore, we demonstrate that the β-chloro position can be engaged in Suzuki cross-coupling. This protocol thus enables the rapid diversification of simple five-, six-, and seven-membered saturated azaheterocycles at two adjacent positions.

β-C-H Allylation of Trialkylamines with Allenes Promoted by Synergistic Borane/Palladium Catalysis

Functionalization of the C(sp3 )-H bonds of trialkylamines is challenging, especially for reactions at positions other than the α position. Herein, we report a method for β-C(sp3 )-H allylation of trialkylamines. In these reactions, which involve synergistic borane/palladium catalysis, an enamine intermediate is first generated from the amine via α,β-dehydrogenation promoted by B(C6 F5 )3 and a base, and then the enamine undergoes palladium-catalyzed reaction with an allene to give the allylation product. Because the hydride and the proton resulting from the initial dehydrogenation are ultimately shuttled to the product by B(C6 F5 )3 and the palladium catalyst, respectively, these reactions show excellent atom economy. The establishment of this method paves the way for future studies of C-H functionalization of trialkylamines by means of synergistic borane/transition-metal catalysis.

Stereoselective Synthesis of α-Disubstituted β-Homoprolines

An efficient enantioselective synthesis of chiral α-disubstituted β-homoprolines was developed, starting with the stereodivergent allylation of chiral N-tert-butanesulfinyl imines derived from 4-bromobutanal with indium or zinc and using well-established and reliable synthetic transformations. This methodology allows the easy introduction of different substituents at the α-position of the pyrrolidine scaffold and is characterized by the possibility of switching the absolute configuration of the newly formed stereocenter either by changing the configuration of the tert-butanesufinamide chiral auxiliary or by using a different stereodivergent allylation protocol with the same auxiliary.

Tertiary Amine-Mediated Reductions of Phosphine Oxides to Phosphines

The reduction of phosphine oxides without the use of highly reactive reductants represents a safer and more sustainable solution for recycling of organophosphorus compounds. Herein, we disclose an N,N,N',N'-tetramethylethylenediamine (TMEDA)-mediated reduction via an unusual intermolecular hydride transfer. Mechanistic studies suggest that TMEDA serves as a hydride donor, while the P(V) halophosphonium salt acts as the hydride acceptor. This methodology provides a scalable and efficient protocol to reduce phosphine oxides under mild conditions.

B(C6F5)3-catalyzed β-C(sp3)-H alkylation of tertiary amines with 2-aryl-3H-indol-3-ones

The β-C-H functionalization of amines is one of the most powerful tools for the synthesis of saturated nitrogen-containing heterocycles in organic synthesis. However, the β-C-H functionalization of amines via redox-neutral addition with cyclic-ketimines is still unprecedented. Herein, the β-C-H functionalization of tertiary amines is described, providing the corresponding 1,3-diamines containing the indolin-3-one moiety in high yields via the B(C₆F₅)₃-catalyzed borrowing hydrogen strategy. According to the experimental results, a possible catalytic cycle has been proposed to rationalize the process of this reaction. Notably, the β-C-H alkylation of amines is external oxidant- and transition-metal-free, which makes a significant contribution to promoting economical chemical synthesis.

Synergistic effect of hydrogen bonds and π-π interactions of B(C6F5)3·H2O/amides complex: Application in photoredox catalysis

B(C₆F₅)₃·H₂O has been long recognized as a common Brønsted acid. The lack of X-ray crystal structure of B(C₆F₅)₃·H₂O with other substrates has greatly limited the development of a new catalytic mode. In this work, a complex of B(C₆F₅)₃·H₂O and amide 2-phenyl-3,4-dihydroisoquinolin-1(2H)-one with hydrogen bonds and π-π interactions is characterized by X-ray diffraction. Such noncovalent interactions in solution also exist, as verified by NMR, UV-Vis absorption, and fluorescence emission measurements. Moreover, the mixture of amide 2-phenyl-3,4-dihydroisoquinolin-1(2H)-one and B(C₆F₅)₃·H₂O, instead of other tested Brønsted acids, shows a tailing absorption band in the visible light region (400-450 nm). Based on the photoactive properties of the complex, a photoredox catalysis is developed to construct α-aminoamides under mild conditions.

Recent Advances in Asymmetric Catalysis Associated with B(C6F5)3

The prevalence and significance of asymmetric catalysis in the modern medicinal industry has been witnessed in recent years, which have already been used to manufacture the (S)-Naproxen and the (S)-Propranolol. With matched specificities such as the Lewis acidity and steric bulk, B(C₆F₅)₃ has gained accelerating attention on its application in asymmetric catalysis of Diels-Alder cycloaddition reactions, carbonyl-ene cyclization, and other various reactions, which have been demonstrated by the elegant examples from the most recent literature. Some significant progress in the reaction of indirect activation of substrates through in situ generation of numerous supramolecular catalysts from B(C₆F₅)₃ based on Lewis-acid-assisted Lewis acid (LLA) or Lewis acid assisted Brønsted acid (LBA) strategies or the reaction promoted by cooperative actions of chiral co-catalysts and B(C₆F₅)₃ which played a direct role on the activation of substrates have been demonstrated in this review.

Hydride-Abstraction-Initiated Catalytic Stereoselective Intermolecular Bond-Forming Processes

The stereoselective intermolecular bond-forming reactions through the direct manipulation of ubiquitous yet inert C(sp³)-H bonds represent an important and long-standing goal in chemistry. In particular, developing such a stereoselective bimolecular transformation involving carbocation intermediates generated via site-selective hydride abstraction or formal hydride abstraction by organic oxidants would avoid the preinstallation of directing groups and is therefore attractive. Hydride-abstraction-initiated bimolecular transformations have received considerable attention, but existing examples lack stereoselective studies. Prevalent stereoselective studies typically suffer from the narrow substrate scope of specific and highly reactive N-aryl amines and diarylmethanes together with limited synthetic utility. This Account describes our recent advances in the development and synthetic application of hydride-abstraction-initiated stereoselective intermolecular C-C and C-H bond-forming processes with significantly expanded scopes involving structurally diverse N-acyl amines and ethers together with nitriles, esters, and perfluoroalkyl moieties.We first explored hydride-abstraction-initiated stereoselective intermolecular C-C bond-forming processes. Utilizing triarylmethyl cations or oxoammonium ions as hydride abstractors, we accomplished the diastereoselective oxidative C-H functionalization of structurally diverse N-acyl amines and ethers with a range of organoboranes and C-H components, efficiently installing a series of alkyl, alkenyl, aryl, and alkynyl species into the α-position of heteroatoms with good levels of diastereocontrol. Subsequently, we developed an "acetal pool" strategy as the toolbox to regulate the stability of cationic intermediates and the compatibility of organic oxidants with a delicate asymmetric catalysis system. Utilizing this strategy, we achieved the catalytic enantioselective oxidative C-H alkenylation, arylation, alkynylation, and alkylation of diverse N-acyl heterocycles with a range of boronates and C-H components. Simultaneously, we extended this strategy to the asymmetric oxidative C-H alkylation of ethers. Notably, the method allows solvents that are used daily, such as tetrahydrofuran, tetrahydropyran, and diethyl ether, to be facilely transformed to high-value-added optically pure bioactive molecules. We further expanded the scope of this challenging area from the C(sp³)-H bond adjacent to electron-donating heteroatoms to valuable electron-withdrawing functional groups including nitriles, esters, and perfluoroalkyl moieties for the stereoselective construction of single and vicinal quaternary carbon stereocenters, respectively.We studied hydride-abstraction-initiated catalytic asymmetric intermolecular C-H bond-forming processes, known as redox deracemization. Utilizing the acetal pool strategy, we reported the first redox deracemization of cyclic benzylic ethers. Later, we disclosed an aerobic one-pot deracemization of diverse α-amino acid derivatives with excellent functional group compatibility. We further achieved the deracemization of the tertiary stereogenic center adjacent to electron-withdrawing groups including perfluoroalkyl, cyano, and ester moieties, which are otherwise difficult to construct.

B(C6F5)3-Catalyzed α,β-Difunctionalization and C-N Bond Cleavage of Saturated Amines with Benzo[c]isoxazoles: Access to Quinoline Derivatives

Herein, we disclose a strategy to realize α,β-difunctionalization and C-N bond cleavage of saturated amines with benzo[c]isoxazoles via a B(C₆F₅)₃-catalyzed consecutive hydrogen-borrowing and [4 + 2] cycloaddition followed by a C-N bond cleavage process. In general, the reactions proceed efficiently in the absence of any oxidant and metal catalyst to afford a broad range of quinoline derivatives starting from easily accessible substrates in an atom-economical manner.

Remote and Proximal Hydroaminoalkylation of Alkenes Enabled by Photoredox/Nickel Dual Catalysis

A mild and site-selective hydroaminoalkylation of activated and unactivated alkenes via dual photoredox/Ni catalysis is developed. This dual catalytic strategy enables exclusive access to α-selective products, which is complementary to previously reported photocatalytic hydroaminoalkylation of activated alkenes that provides the β-selective products. The chain-walking of a Ni-H intermediate toward a carbonyl allows for the hydroaminoalkylation of unactivated alkenes at remote sp³ C-H sites. This method tolerates a broad substrate scope of both amines and alkenes as well as providing a streamlined synthesis of value-added β-amino acid derivatives from readily available starting materials.

Reactions of Diethylazo-Dicarboxylate with Frustrated Lewis Pairs

Reactions of PAr₃ /B(C₆ F₅ )₃ (Ar=o-Tol, Mes, Ph) FLPs with diethyl azodicarboxylate (DEAD) afford the corresponding FLP addition products 1-3 in which P-N and B-O linkages are formed. In contrast, the reaction of BPh₃ , PPh₃ and DEAD gave product 4 where P-N and N-B linkages were confirmed. In all cases, other binding modes were computed to be both higher in energy and readily distinguishable by ³¹ P and ¹¹ B NMR parameters. These data illustrate the influence of steric demands and electronic structures on the nature of the products of FLP reactions with DEAD.

Visible-Light-Induced Dual C(sp3)-H Bond Functionalization of Tertiary Amine via Hydrogen Transfer to Carbene and Subsequent Cycloaddition

Herein, we describe the dual C(sp³)-H bond functionalization of a tertiary amine through hydride-transfer-induced dehydrogenation, followed by cycloaddition, using an easily preparable diazoester as a new type hydride-acceptor precursor under mild, redox-neutral conditions. With carbene as a hydrogen acceptor, this method was demonstrated by the preparation of a broad range of functionalized isoxazoldines in moderate to good yields.

Synthetic applications of hydride abstraction reactions by organic oxidants

Carbon-hydrogen bond functionalizations provide an attractive method for streamlining organic synthesis, and many strategies have been developed for conducting these transformations. Hydride-abstracting reactions have emerged as extremely effective methods for oxidative bond-forming processes due to their mild reaction conditions and high chemoselectivity. This review will predominantly focus on the mechanism, reaction development, natural product synthesis applications, approaches to catalysis, and use in enantioselective processes for hydride abstractions by quinone, oxoammonium ion, and carbocation oxidants. These are the most commonly employed hydride-abstracting agents, but recent efforts illustrate the potential for weaker ketone and triaryl borane oxidants, which will be covered at the end of the review.

Hydrogenation of cage-opened C60 derivatives mediated by frustrated Lewis pairs

Multiply-carbonylated fullerene derivatives were found to work as one component in frustrated Lewis pairs which caused an Si-H bond activation in the presence of B(C₆F₅)₃, leading to the carbonyl hydrogenation in up to 99% yield. The Lewis acid-mediated reductive arylation also took place to furnish a corresponding ketal derivative.

Borane-catalyzed cascade Friedel–Crafts alkylation/[1,5]-hydride transfer/Mannich cyclization to afford tetrahydroquinolines

We report a redox-neutral annulation reaction of tertiary amines with electron-deficient alkynes under metal-free and oxidant-free conditions.

Boron-Based Lewis Acid Catalysis: Challenges and Perspectives

In the last two decades, boron-based catalysis has been gaining increasing traction in the field of organic synthesis. The use of halogenated triarylboranes as main group Lewis acid catalysts is an attractive strategy. It has been applied in a growing number of transformations over the years, where they may perform comparably or even better than the gold standard catalysts. This review discusses methods of borane synthesis and cutting-edge boron-based Lewis acid catalysis, focusing especially on tris(pentafluorophenyl)-borane [B(C6F5)3], and other halogenated triarylboranes, highlighting how boron Lewis acids employed as catalysts can unlock a plethora of unprecedented chemical transformations or improve the efficiency of existing reactions.

EATA Reaction Catalyzed by Copper Halides of Mixed Oxidation States and Its Application to Total Synthesis of Scorodonin

Naturally occurring conjugated allenynes are of general interest to the scientific community for their potent and various biological activities. The 1,5-H transfer of alka-1,4-diyn-3-yl amines would be one of the most straightforward yet challenging approach to this class of compounds since it may, in principle, form two regioisomeric products involving two different C-C triple bonds. Herein, a catalytic recipe of copper halides with mixed oxidation states, i.e., CuCl/CuBr 2 , has been identified to address the issues of the side reaction of conjugate addition and the selectivity of 1,5-H transfer of the key intermediate, alka-1,4-diyn-3-yl amines, in EATA (Enantioselective Allenation of Terminal Alkynes) reaction involving the conjugated 2-alkynals. This protocol could accommodate a wide range of functional groups providing a series of allenynes with a very high enantioselectivity (up to >99% ee). In addition, the enantioenriched allenynes can be readily transformed into various building blocks and applied to the highly enantioselective total synthesis of linear allenic natural product scorodonin for the first time. Mechanistic studies and DFT calculations elucidated the high regioselectivity for observed 1,5-H transfer within the intermediate of 1,4-diyn-3-yl amines. The calculated energy difference between two of the most stable transition states of 3.4 kcal/mol accounts for a selectivity of over 99:1, which is in perfect agreement with the experimental results.

C-H functionalisation tolerant to polar groups could transform fragment-based drug discovery (FBDD)

We have analysed 131 fragment-to-lead (F2L) examples targeting a wide variety of protein families published by academic and industrial laboratories between 2015-2019. Our assessment of X-ray structural data identifies the most common polar functional groups involved in fragment-protein binding are: N-H (hydrogen bond donors on aromatic and aliphatic N-H, amides and anilines; totalling 35%), aromatic nitrogen atoms (hydrogen bond acceptors; totalling 23%), and carbonyl oxygen group atoms (hydrogen bond acceptors on amides, ureas and ketones; totalling 22%). Furthermore, the elaboration of each fragment into its corresponding lead is analysed to identify the nominal synthetic growth vectors. In ∼80% of cases, growth originates from an aromatic or aliphatic carbon on the fragment and more than 50% of the total bonds formed are carbon-carbon bonds. This analysis reveals that growth from carbocentric vectors is key and therefore robust C-H functionalisation methods that tolerate the innate polar functionality on fragments could transform fragment-based drug discovery (FBDD). As a further resource to the community, we have provided the full data of our analysis as well as an online overlay page of the X-ray structures of the fragment hit and leads: https://astx.com/interactive/F2L-2021/.

Copper(i)-catalyzed asymmetric intramolecular C-arylation with ureas as the additives: highly enantioselective formation of spirooxindoles

A cooperative catalytic strategy is developed for a copper-catalyzed asymmetric intramolecular C-arylation reaction with ureas as the co-catalysts. By forming hydrogen bonds with 1,3-dicarbonyl structures, ureas can activate the substrates, stabilize the carbanion intermediates and the products, and fix the syn-configurations of 1,3-dicarbonyl structures. They help enhance the reactivity, prevent side reactions and improve the enantioselectivities.

α,α'-C-H Bond Difunctionalization of Unprotected Alicyclic Amines

A simple one-pot procedure enables the sequential, regioselective, and diastereoselective introduction of the same or two different substituents to the α- and α'-positions of unprotected azacycles. Aryl, alkyl, and alkenyl substituents are introduced via their corresponding organolithium compounds. The scope of this transformation includes pyrrolidines, piperidines, azepanes, and piperazines.

C-H Bond Functionalization of Amines: A Graphical Overview of Diverse Methods

This Graphical Review provides a concise overview of the manifold and mechanistically diverse methods that enable the functionalization of sp3 C-H bonds in amines and their derivatives.

Bifunctional Borane Catalysis of a Hydride Transfer/Enantioselective [2+2] Cycloaddition Cascade

Herein, we present a mild and efficient method for synthesizing enantioenriched tetrahydroquinoline-fused cyclobutenes through a cascade reaction between 1,2-dihydroquinolines and alkynones with catalysis by chiral spiro-bicyclic bisboranes. The bisboranes served two functions: first they catalyzed a hydride transfer to convert the 1,2-dihydroquinoline substrate to a 1,4-dihydroquinoline, and then they activated the alkynone substrate for an enantioselective [2+2] cycloaddition reaction with the 1,4-dihydroquinoline generated in situ.

Diastereoselective Synthesis of Dihydro-quinolin-4-ones by a Borane-Catalyzed Redox-Neutral endo-1,7-Hydride Shift

The borane-catalyzed synthesis of dihydroquinoline-4-ones is developed. The amino-substituted chalcones undergo a 1,7-hydride shift upon Lewis acid activation to form a zwitterionic iminium enolate, which collapses to the dihydroquinoline-4-one scaffold. The reaction proceeds in high yields (75-99%) with an excellent diastereoselectivity of up to >99:1 (cis:trans). The reaction mechanism is investigated by kinetic, isotope labeling, and computational experiments.

Consecutive β,β'-Selective C(sp3 )-H Silylation of Tertiary Amines with Dihydrosilanes Catalyzed by B(C6 F5 )3

Tris(pentafluorophenyl)borane has been found to catalyze the two‐fold C(sp³)−H silylation of various trialkylamine derivatives with dihydrosilanes, furnishing the corresponding 4‐silapiperidines in decent yields. The multi‐step reaction cascade involves amine‐to‐enamine dehydrogenation at two alkyl residues and two electrophilic silylation reactions of those enamines, one inter‐ and one intramolecular.

Tris(pentafluorophenyl)borane catalyzed C-C and C-heteroatom bond formation

A series of boron based Lewis acids have been reported to date, but among them, tris(pentafluorophenyl)borane (BCF) has gained the most significant attention in the synthetic chemistry community. The viability of BCF as a potential Lewis acid catalyst has been vastly explored in organic and materials chemistry due to its thermal stability and commercial availability. Most explorations of BCF chemistry in organic synthesis has occurred in the last two decades and many new catalytic reactivities are currently under investigation. This review mainly focuses on recent reports from 2018 onwards and provides a concise knowledge to the readers about the role of BCF in metal-free catalysis. The review has mainly been categorized by different types of organic transformation mediated through BCF catalysis for the C-C and C-heteroatom bond formation.

Rhodium(iii) catalyzed olefination and deuteration of tetrahydrocarbazole

The rhodium-catalyzed olefination and deuteration of tetrahydrocarbazoles in water with the aid of an N,N-dimethylcarbamoyl-protected group is presented. This olefination method features a broad substrate scope, good functional-group tolerance, and high efficiency in water. Practical applications of the protocol are illustrated by the synthesis of various evodiamine derivatives. As such, this environmentally friendly approach to directly modify natural products will attract much attention in academic and industrial research.

Electron-deficient boron-based catalysts for C-H bond functionalisation

In contrast to transition metal-catalysed C-H functionalisation, highly efficient construction of C-C and C-X (X = N, O, S, B, Si, etc.) bonds through metal-free catalytic C-H functionalisation remains one of the most challenging tasks for synthetic chemists. In recent years, electron-deficient boron-based catalyst systems have exhibited great potential for C-H bond transformations. Such emerging systems may greatly enrich the chemistry of C-H functionalisation and main-group element catalysis, and will also provide enormous opportunities in synthetic chemistry, materials chemistry, and chemical biology. This article aims to give a timely comprehensive overview to recognise the current status of electron-deficient boron-based catalysis in C-H functionalisation and stimulate the development of more efficient catalytic systems.

Enantioselective Synthesis of N-Alkylamines through β-Amino C-H Functionalization Promoted by Cooperative Actions of B(C6F5)3 and a Chiral Lewis Acid Co-Catalyst

We disclose a catalytic method for β-C(sp³)-H functionalization of N-alkylamines for the synthesis of enantiomerically enriched β-substituted amines, entities prevalent in pharmaceutical compounds and used to generate different families of chiral catalysts. We demonstrate that a catalyst system comprising of seemingly competitive Lewis acids, B(C₆F₅)₃, and a chiral Mg- or Sc-based complex, promotes the highly enantioselective union of N-alkylamines and α,β-unsaturated compounds. An array of δ-amino carbonyl compounds was synthesized under redox-neutral conditions by enantioselective reaction of a N-alkylamine-derived enamine and an electrophile activated by the chiral Lewis acid co-catalyst. The utility of the approach is highlighted by late-stage β-C-H functionalization of bioactive amines. Investigations in regard to the mechanistic nuances of the catalytic processes are described.

Diversification of Unprotected Alicyclic Amines by C-H Bond Functionalization: Decarboxylative Alkylation of Transient Imines

Despite extensive efforts by many practitioners in the field, methods for the direct α-C-H bond functionalization of unprotected alicyclic amines remain rare. A new advance in this area utilizes N-lithiated alicyclic amines. These readily accessible intermediates are converted to transient imines through the action of a simple ketone oxidant, followed by alkylation with a β-ketoacid under mild conditions to provide valuable β-amino ketones with unprecedented ease. Regioselective α'-alkylation is achieved for substrates with existing α-substituents. The method is further applicable to the convenient one-pot synthesis of polycyclic dihydroquinolones through the incorporation of a SN Ar step.

Recent advances in the functionalization of saturated cyclic amines

Functionalized cyclic amines are the essential structural moieties of numerous biologically active compounds. This review summarized the most recent advances in the C–H, C–N and C–C bond functionalization of saturated cyclic amines.

Recent advances in hydride transfer-involved C(sp3)–H activation reactions

This review summarizes the recent progresses (2016–2020) in the hydride transfer-enabled C(sp³)–H activation according to the reaction types, categorized into the intramolecular/intermolecular C(sp³)–H functionalization, and hydride reduction.

Electron deficient borane-mediated hydride abstraction in amines: stoichiometric and catalytic processes

Borane mediated hydride abstraction of amines efficiently generates useful iminium salts. This review explores this fascinating reactivity and discusses how the iminium intermediates are utilised in a variety of stoichiometric and catalytic processes.