Point of Anchor: Impacts on Interfacial Charge Transfer of Metal Oxide Nanoparticles

Alkyne-Functionalized Platinum Chalcogenide (S, Se) Nanoparticles

Metal chalcogenide nanoparticles play a vital role in a wide range of applications and are typically stabilized by organic derivatives containing thiol, amine, or carboxyl moieties, where the nonconjugated particle-ligand interfaces limit the electronic interactions between the inorganic cores and organic ligands. Herein, a wet-chemistry method is developed for the facile preparation of stable platinum chalcogenide (S, Se) nanoparticles capped with acetylene derivatives (e.g., 4-ethylphenylacetylene, EPA). The formation of Pt-C≡ conjugated bonds at the nanoparticle interfaces, which is confirmed by optical and X-ray spectroscopic measurements, leads to markedly enhanced electronic interactions between the d electrons of the nanoparticle cores and π electrons of the acetylene moiety, in stark contrast to the mercapto-capped counterparts with only nonconjugated Pt-S- interfacial bonds, as manifested in spectroscopic measurements and density functional theory calculations. This study underscores the significance of conjugated anchoring linkages in the stabilization and functionalization of metal chalcogenides, a unique strategy for diverse applications.

Chiral zinc oxide functionalized quartz crystal microbalance sensor for enantioselective recognition of amino acids

Chiral transition metal oxides with tunable structures and multiple physicochemical features have been increasingly applied for chiral sensing and detection. In this work, chiral zinc oxide (ZnO) was first applied as selector to construct quartz crystal microbalance (QCM) sensor for enantioselective recognition of amino acids. The chiral ZnO was prepared by a methionine-induced self-assembly strategy and its high topological chirality was confirmed by several techniques such as circular dichroism spectrum. The chiral discrimination factors were calculated by frequency shifts in response to aspartic acid, phenylalanine, lysine and arginine on L-ZnO surface, achieving 1.89 ± 0.04, 1.76 ± 0.11, 1.66 ± 0.07 and 1.54 ± 0.09, respectively. Notably, L-enantiomers preferred stronger absorptions on L-ZnO surface as compared to D-forms. It was further found that this sensor was appropriate for quantitative analysis and enantiomer excess analysis and adsorption kinetics study. Furthermore, molecular docking revealed the recognition mechanism, where chiral distinction was caused by the different steric interactions between enantiomers and chiral ZnO. This method enjoyed merits of high enantioselectivity, simple preparation and low cost, offering newly chiral sensing method for other molecules.

Stable Cuprous Hydroxide Nanostructures by Organic Ligand Functionalization

Copper compounds have been extensively investigated for diverse applications. However, studies of cuprous hydroxide (CuOH) have been scarce due to structural metastability. Herein, a facile, wet-chemistry procedure is reported for the preparation of stable CuOH nanostructures via deliberate functionalization with select organic ligands, such as acetylene and mercapto derivatives. The resulting nanostructures are found to exhibit a nanoribbon morphology consisting of small nanocrystals embedded within a largely amorphous nanosheet-like scaffold. The acetylene derivatives are found to anchor onto the CuOH forming CuC linkages, whereas CuS interfacial bonds are formed with the mercapto ligands. Effective electronic coupling occurs at the ligand-core interface in the former, in contrast to mostly non-conjugated interfacial bonds in the latter, as manifested in spectroscopic measurements and confirmed in theoretical studies based on first principles calculations. Notably, the acetylene-capped CuOH nanostructures exhibit markedly enhanced photodynamic activity in the inhibition of bacteria growth, as compared to the mercapto-capped counterparts due to a reduced material bandgap and effective photocatalytic generation of reactive oxygen species. Results from this study demonstrate that deliberate structural engineering with select organic ligands is an effective strategy in the stabilization and functionalization of CuOH nanostructures, a critical first step in exploring their diverse applications.

Anisotropic growth of ZnO nanoparticles driven by the structure of amine surfactants: the role of surface dynamics in nanocrystal growth

Herein, we elucidate the key role of amine surfactants in the controlled anisotropic growth of ZnO nanoparticles that is achieved under mild conditions by organometallic hydrolysis. The structuring influence of alkyl substituents on the nitrogen atom of amines is jointly analyzed theoretically by DFT modeling, and experimentally by multinuclear NMR (¹H, ¹³C and ¹⁷O) spectroscopy. We demonstrate that in initial steps leading to the growth of colloidal ZnO particles, the nature of molecular species that are involved in the solution strongly depends on the structure of the amine surfactant. By using tertiary, secondary or primary amines, no or weak adducts between the amine and zinc, or stable adducts, or adduct oligomers were identified, respectively. Afterwards, following the course of the reaction, the dynamic behavior of the amines on the grown ZnO nanocrystal surfaces is also strongly correlated with their structure. We identified that in the presence of tertiary, secondary or primary amines, no significant [Zn⋯N] adsorption, or surface adsorption with notable surface mobility, or a very strong adsorption is achieved, respectively. The last case, primary amines, significantly involves the structuring of a hydrogen bonding network. Therefore, such surface dynamic behavior has a predominant role in driving the nanocrystal growth, and orienting the ZnO material final morphology. By forming hydrogen bonds at the nanoparticle surface during the growth process, primary amines specifically lead to the formation of nanorods. Conversely, isotropic nanoparticles and aggregates are obtained when secondary and tertiary amines are used, respectively. These findings shed light on the role of weak surface interactions, herein H-bonding, that rule the growth of nano-objects and are as such crucial to identify, study, and control for achieving progress in nanoscience.

Photooxidation of Isoprene by Titanium Oxide Cluster Anions with Dimensions up to a Nanosize

Titania (TiO₂) nanoparticles are active photocatalysts, and isoprene (C₅H₈) is a biogenic volatile organic compound that contributes crucially to global particulate matter generation. Herein, the direct photooxidation of isoprene by titanium oxide cluster anions with dimensions up to a nanosize by both ultraviolet (UV) and visible (Vis) light excitations has been successfully identified through mass spectrometric experiments combined with quantum chemistry calculations. The potential role of "dry" titania in atmospheric isoprene oxidation has been revealed, and a clear picture of the photooxidation mechanism on titanium oxide nanoparticles has been provided explicitly at the molecular level. The adsorption of isoprene on the atomic oxygen radicals (O^•-) of titanium oxide clusters leads to the formation of the crucial interfacial state (IS) within the band gap of titanium oxides. This IS is demonstrated to be the significant factor in delivering the electron from the π orbital of C₅H₈ to the Ti_3d orbital in the photooxidation process (C₅H₈ + Ti⁴⁺-O^•- → C₅H₈O + Ti³⁺) and creating photoactivity in the Vis region. It is revealed that after the photogeneration of the O^•- radicals by UV excitation on the TiO₂ particle surface, the subsequent reactions can be induced by Vis excitation through the IS. This multicolor strategy in both the UV and Vis regions can enhance the efficiency of solar energy harvesting and improve the product yield of the photocatalysis on TiO₂ nanoparticles. New insights have been provided into both the atmospheric chemistry of isoprene and the photochemistry of TiO₂ nanoparticles.

Heterojunction interface of zinc oxide and zinc sulfide promoting reactive molecules activation and carrier separation toward efficient photocatalysis

Heterojunction photocatalysts, which can alleviate the low carrier separation efficiency and insufficient light absorption capacity of a single catalyst, have received widespread attention. However, the specific interfacial structure of the heterojunction and its effect on the photocatalytic reaction is still unclear. Herein, a battery of zinc oxide/zinc sulfide (ZnO@ZnS) heterojunction microspheres with different degrees of sulfuration were successfully constructed via a facile hydrothermal method. The as-prepared photocatalysts shown decent aerobic nitric oxide (NO) oxidation performance under visible light irradiation, and the results of various characterization techniques illustrated that the superior photoactivity could be ascribed to the spatial separation of photoinduced electron-hole pairs due to the synergy of the internal electric field and the band offset. More importantly, density functional theory (DFT) calculations revealed that the heterojunction interface can significantly promote the generation of reactive oxygen species (ROS) and NO⁺ reaction intermediates and thus accelerate the photocatalytic reaction. Finally, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) technology was used to time-dependently monitor the NO oxidation process, revealing the photocatalytic mechanism. This work investigated the role of the heterojunction interface in the gas-phase catalytic reaction, broadening the practical application of the ZnO@ZnS heterojunction.

Antibacterial Activity of Nitrogen-Doped Carbon Dots Enhanced by Atomic Dispersion of Copper

Antibiotic resistance is an imminent threat to human health, requiring the development of effective alternate antibacterial agents. One such alternative includes nanoparticle (photo)catalysts that are good at producing reactive oxygen species (ROS). Herein, we report the design and preparation of nitrogen-doped carbon dots functionalized with atomically dispersed copper centers by Cu-N coordination (Cu/NCD) that exhibit apparent antibacterial activity toward Gram-negative Escherichia coli (E. coli) under photoirradiation. The growth of E. coli cells is found to be markedly inhibited by Cu/NCD under 365 nm photoirradiation, whereas no apparent inhibition is observed in the dark or with the copper-free carbon dots alone. This is ascribed to the prolonged photoluminescence lifetime of Cu/NCD that facilitates the separation of photogenerated electron-hole pairs and ROS formation. The addition of tert-butyl alcohol is found to completely diminish the antimicrobial activity, suggesting that hydroxyl radicals are responsible for microbial death. Consistent results are obtained from fluorescence microscopic studies using CellROX green as the probe. Similar bactericidal behaviors are observed with Gram-positive Staphylococcus epidermidis (S. epidermidis). The copper content within the carbon material is optimized at a low loading of 1.09 wt %, reducing the possibility of toxic copper-ion leaching. Results from this study highlight the significance of carbon-based nanocomposites with isolated metal species as potent antimicrobial reagents.

Chemically Bonded N-PDI-P/WO3 Organic-Inorganic Heterojunction with Improved Photoelectrochemical Performance

The chemical bonding of bandgap adjustable organic semiconductors with inorganic semiconducting materials is effective in constructing a high-performance heterogeneous photoanode. In this study, a new asymmetric perylene diimide derivative molecule (N-PDI-P) was synthesized by connecting tert-butoxycarbonyl on an N-site at one end of a PDI molecule through methylene and connecting naphthalene directly onto the other end. This molecule was bonded onto the WO3 film surface, thereby forming the photoanode of organic-inorganic heterojunction. Under light illumination, the photocurrent density of chemically bonded N-PDI-P/WO3 heterojunction was twofold higher than that of physically adhered heterojunction for photoelectrochemical water oxidation at 0.6 V (vs. Ag/AgCl). Energy band structure and charge transfer dynamic analyses revealed that photogenerated electron carriers on the highest occupied molecular orbital (HOMO) of an N-PDI-P molecule can be transferred to the conduction band of WO3. The charge transfer and separation rates were accelerated considerably after the chemical bond formed at the N-PDI-P/WO3 interface. The proposed method provides a new way for the design and construction of organic-inorganic composite heterojunction.

Photosensitive Hybrid Nanostructured Materials: The Big Challenges for Sunlight Capture

Solar radiation is becoming increasingly appreciated because of its influence on living matter and the feasibility of its application for a variety of purposes. It is an available and everlasting natural source of energy, rapidly gaining ground as a supplement and alternative to the nonrenewable energy feedstock. Actually, an increasing interest is involved in the development of efficient materials as the core of photocatalytic and photothermal processes, allowing solar energy harvesting and conversion for many technological applications, including hydrogen production, CO2 reduction, pollutants degradation, as well as organic syntheses. Particularly, photosensitive nanostructured hybrid materials synthesized coupling inorganic semiconductors with organic compounds, and polymers or carbon-based materials are attracting ever-growing research attention since their peculiar properties overcome several limitations of photocatalytic semiconductors through different approaches, including dye or charge transfer complex sensitization and heterostructures formation. The aim of this review was to describe the most promising recent advances in the field of hybrid nanostructured materials for sunlight capture and solar energy exploitation by photocatalytic processes. Beside diverse materials based on metal oxide semiconductors, emerging photoactive systems, such as metal-organic frameworks (MOFs) and hybrid perovskites, were discussed. Finally, future research opportunities and challenges associated with the design and development of highly efficient and cost-effective photosensitive nanomaterials for technological claims were outlined.