Exploiting Intermolecular Interactions between Alkyl-Functionalized Redox-Active Molecule Pairs to Enhance Interfacial Electron Transfer

Stereochemical Control of Redox CoII/CoIII-Cages with Switchable Cotton Effects Based on Labile-Static States

The structural dynamics of artificial assemblies, in aspects such as molecular recognition and structural transformation, provide us with a blueprint to achieve bioinspired applications. Here, we describe the assembly of redox-switchable chiral metal-organic cages Λ8/Δ8-[Pd6(CoIIL3)8]28+ and Λ8/Δ8-[Pd6(CoIIIL3)8]36+. These isomeric cages demonstrate an on-off chirality logic gate controlled by their chemical and stereostructural dynamics tunable through redox transitions between the labile CoII-state and static CoIII-state with a distinct Cotton effect. The transition between different states is enabled by a reversible redox process and chiral recognition originating in the tris-chelate Co-centers. All cages in two states are thoroughly characterized by NMR, ESI-MS, CV, CD, and X-ray crystallographic analysis, which clarify their redox-switching behaviors upon chemical reduction/oxidation. The stereochemical lability of the CoII-center endows the Λ8/Δ8-CoII-cages with efficient chiral-induction by enantiomeric guests, leading to enantiomeric isomerization to switch between Λ8/Δ8-CoII-cages, which can be stabilized by oxidation to their chemically inert forms of Λ8/Δ8-CoIII-cages. Kinetic studies reveal that the isomerization rate of the Δ8-CoIII-cage is at least an order of magnitude slower than that of the Δ8-CoII-cage even at an elevated temperature, while its activation energy is 16 kcal mol-1 higher than that of the CoII-cage.

Solvent-Dependent Functional Aggregates of Unsymmetrical Squaraine Dyes on TiO2 Surface for Dye-Sensitized Solar Cells

Alkyl group wrapped donor-acceptor-donor (D-A-D) based unsymmetrical squaraine dyes SQ1, SQ5, and SQS4 were used to evaluate the effect of sensitizing solvents on dye-sensitized solar cell (DSSC) efficiency. A drastic change in DSSC efficiency was observed when the photo-anodes were sensitized in acetonitrile (bad solvent when considering dye solubility) and chloroform (good solvent) with an Iodolyte (I^-/I₃^-) electrolyte. The DSSC device sensitized with squaraine dyes in acetonitrile showed better photovoltaic performance with enhanced photocurrent generation and photovoltage compared to the device sensitized in chloroform. In a good sensitizing solvent, dyes with long hydrophobic alkyl chains are deleterious forming aggregates on the TiO₂ surface, which results in an incident photon-to-current conversion efficiency (IPCE) response mostly from monomeric and dimeric structures. Meanwhile, a bad sensitizing solvent facilitates the formation of well-packed self-assembled structures on the TiO₂ surface, which are responsible for a broad IPCE response and high device efficiencies. The photoanode sensitized in the bad sensitizing solvent showed enhanced V_OC values of 642, 675, and 699 mV; J_SC values of 6.38, 11.1, and 11.69 mA/cm²; and DSSC device efficiencies of 3.0, 5.63, and 6.13% for the SQ1, SQ5, and SQS4 dyes in the absence of a coadsorbent (chenodeoxycholic acid (CDCA)), respectively, which were further enhanced by CDCA addition. Meanwhile, the photoanode sensitized in the good sensitizing solvent showed relatively low photovoltaic V_OC values of 640, 652, and 650 mV; J_SC values of 5.78, 6.79, and 6.24 mA/cm²; and device efficiencies of 2.73, 3.35, and 3.20% for SQ1, SQ5, and SQS4 in the absence of CDCA, respectively, which were further varied with equivalents of CDCA. The best DSSC device efficiencies of 6.13 and 3.20% were obtained for SQS4 without CDCA, where the dye was sensitized in acetonitrile (bad) and chloroform (good) sensitizing solvents, respectively.

Advances in preparation, mechanism and applications of graphene quantum dots/semiconductor composite photocatalysts: A review

Due to the low efficiency of single-component nano materials, there are more and more studies on high-efficiency composites. As zero dimensional (0D) non-metallic semiconductor material, the emergence of graphene quantum dots (GQDs) overcomes the shortcomings of traditional photocatalysts (rapid rate of electron-hole recombination and narrow range of optical response). Their uniqueness is that they can combine the advantages of quantum dots (rich functional groups at edge) and sp² carbon materials (large specific surface area). The inherent inert carbon stabilizes chemical and physical properties, and brings new breakthroughs to the development of benchmark photocatalysts. The photocatalytic efficiency of GQDs composite with semiconductor materials (SCs) can be improved by the following three points: (1) accelerating charge transfer, (2) extending light absorption range, (3) increasing active sites. The methods of preparation (bottom-up and top-down), types of heterojunctions, mechanisms of photocatalysis, and applications of GQDs/SCs (wastewater treatment, energy storage, gas sensing, UV detection, antibiosis and biomedicine) are comprehensively discussed. And it is hoped that this review can provide some guidance for the future research on of GQDs/SCs on photocatalysis.

Heterogenization of Molecular Water Oxidation Catalysts in Electrodes for (Photo)Electrochemical Water Oxidation

Water oxidation is still one of the most important challenges to develop efficient artificial photosynthetic devices. In recent decades, the development and study of molecular complexes for water oxidation have allowed insight into the principles governing catalytic activity and the mechanism as well as establish ligand design guidelines to improve performance. However, their durability and long-term stability compromise the performance of molecular-based artificial photosynthetic devices. In this context, heterogenization of molecular water oxidation catalysts on electrode surfaces has emerged as a promising approach for efficient long-lasting water oxidation for artificial photosynthetic devices. This review covers the state of the art of strategies for the heterogenization of molecular water oxidation catalysts onto electrodes for (photo)electrochemical water oxidation. An overview and description of the main binding strategies are provided explaining the advantages of each strategy and their scope. Moreover, selected examples are discussed together with the the differences in activity and stability between the homogeneous and the heterogenized system when reported. Finally, the common design principles for efficient (photo)electrocatalytic performance summarized.

Enhanced Interfacial Electron Transfer Kinetics Between Co2+/3+ Complexes and Organic Dyes with Free Space Near Their Backbone

Fast electron transfer (ET) between surface-bound dye molecules and electron donor molecules dissolved in electrolytes with simultaneous reduction in recombination rates are crucial to improve the photon-to-electron conversion efficiency of...

Substrate-Dependent Electron-Transfer Rate of Mixed-Ligand Electrolytes: Tuning Electron-Transfer Rate without Changing Driving Force

To meet various requirements for electron transfer (ET) at the substrate/electrolyte interface, mixed redox couples assigned to different functions have been applied. While in all studies the mixed redox species had different redox potentials, such redox systems inherently lose energy by ET between the species. We report interfacial ET kinetics employing mixed-ligand electrolytes based on Co^2+/3+ complexes with mixtures of dimethyl- and dinonyl-substituted bipyridyl (bpy) ligands with the same redox potential. The ET rates of the mixed electrolytes decrease with the increasing ratio of the dinonyl-bpy ligand, with substrates adsorbed by molecules without alkyl chains due to a blocking effect. However, when the molecules on substrates have four alkyl chains, the ET rate between the molecules and the electrolytes with increasing ratio of the dinonyl-bpy ligand is enhanced. The substrate-dependent behavior is explained by selective intermolecular interactions. The results open design flexibility for mixed-redox electrolyte systems to control ET at multi-substrate interfaces and provide a novel means to tune ET rates simultaneously for various ET processes in a system without losing energy by the ET.

The impact of insufficient time resolution on dye regeneration lifetime determined using transient absorption spectroscopy

Dye regeneration lifetimes of a combination of dyes and redox mediators were determined by two transient absorption (TA) spectrometers with 0.5 ns (sub-ns) and 6 ns (ns) time resolutions to elucidate the impact of insufficient time resolution on the measurements of dye regeneration kinetics in dye-sensitised semiconductor electrodes. Due to the disordered nature of the dye-sensitised electrodes, the dye regeneration lifetime is often characterised by half-decay time (τ1/2) of the initial signal magnitude. Alternatively, τ1/2,S is calculated from stretched-exponential lifetime (τww) and the distribution of lifetimes characterised by the stretch parameter (β). Stretched-exponential functions were numerically modelled, showing that to keep the error in τ1/2 ≤ 10%, τww needs to be at least 20 times longer than the time resolution in case of non-dispersive transients (β = 0.9) but at least 870 times longer when dispersive (β = 0.5). To test the predictions, TA decays of a combination of organic and porhyrin dyes and three cobalt-complex mediators are analysed, spanning a range of τww and β. These examples show that a 262% error in τ1/2 is possible if the time resolution of the TA setup is only 13 times faster than τww and smaller β results in larger error when τww is similar. Determining τ1/2,S by stretched-exponential fitting generally reduces the error compared to that determined directly from the graph. However, if the stretched-exponential function does not correctly describe the early signal transient, even a larger error by stretched-exponetial fitting is introduced. The key requirement for accurate measurement is to have a fast-enough TA setup to resolve the initial plateau of the TA signal. To demonstrate the impact of the measured errors, the measured regeneration lifetimes are plotted versus the driving force of the reaction and modelled using Marcus theory. Erroneous regeneration rates lead to an underestimated electronic coupling term by 2.2 times in case of a series of porphyrin dyes matched with Co complex electrolytes, a significant impact when the interpretation of factors affecting electron transfer at dye-sensitised semiconductor/electrolyte interface is discussed.

Synthesis of EDTA-bridged CdS/g-C3N4 heterostructure photocatalyst with enhanced performance for photoredox reactions

Photocatalytic reactions represent a kind of green and sustainable chemical processes for organic transformations, but the efficiency is limited by the severe recombination and/or inadequate redox potentials of photoinduced charge carriers in photocatalysts. To address these issues, herein, the CdS-EDTA/g-C₃N₄ heterostructures were designed according to Z-scheme photocatalytic mechanism and synthesized by the hydrothermal growth of CdS on g-C₃N₄ nanoflakes with assistance of EDTA chelating agent. EDTA played multiple roles in the formation of CdS-EDTA/g-C₃N₄ heterostructure photocatalysts, such as controlling the morphology of CdS nanostructures, linking CdS and g-C₃N₄ together, and boosting the charge transfer between two semiconductors. The optimized CdS-EDTA/g-C₃N₄(10%) photocatalyst exhibited much higher activities toward the selective reduction of nitrophenol and the selective oxidation of benzyl alcohol, than those of CdS/g-C₃N₄ heterostructures without EDTA. The enhanced photocatalysis of CdS-EDTA/g-C₃N₄ can be ascribed to the efficient separation and suitable photoredox potentials of photoexcited charge carriers in the EDTA-bridged Z-scheme system. This work provides the inspiration for exploring inexpensive organic electron mediators for constructing all-solid-state Z-scheme photocatalysts and demonstrates the enhanced performance of Z-scheme photocatalysts for photoredox reactions of organic transformations.