A Covalent Organic Framework Bearing Single Ni Sites as a Synergistic Photocatalyst for Selective Photoreduction of CO2 to CO

Covalent Organic Frameworks for Photocatalytic Reduction of Carbon Dioxide: A Review

Covalent organic frameworks (COFs) are crystalline networks with extended backbones cross-linked by covalent bonds. Due to the semiconductive properties and variable metal coordinating sites, along with the rapid development in linkage chemistry, the utilization of COFs in photocatalytic CO2RR has attracted many scientists' interests. In this Review, we summarize the latest research progress on variable COFs for photocatalytic CO2 reduction. In the first part, we present the development of COF linkages that have been used in CO2RR, and we discuss four mechanisms including COFs as intrinsic photocatalysts, COFs with photosensitive motifs as photocatalysts, metalated COF photocatalysts, and COFs with semiconductors as heterojunction photocatalysts. Then, we summarize the principles of structural designs including functional building units and stacking mode exchange. Finally, the outlook and challenges have been provided. This Review is intended to give some guidance on the design and synthesis of diverse COFs with different linkages, various structures, and divergent stacking modes for the efficient photoreduction of CO2.

Ultrahigh Single Au Atoms Loaded Porous Aromatic Frameworks for Enhanced Photocatalytic Hydrogen Evolution

Supported single-atom catalysts (SACs) are promising in heterogeneous catalysis because of their atom economy, unusual transformations, and mechanistic clarity. The metal SAs loading, however, limits the catalytic efficiency. Herein, an in situ pre-metallated monomer-based preparation strategy is shown to achieve ultrahigh Au SAs loading in catalyst formations. The polymerization of single-atom loaded monomers yield a new porous aromatic framework (PAF-164) with Au SAs loading up to a record high 45.3 wt.%. SACs of Au-PAFs exhibit excellent photocatalytic activity in hydrogen (H2) evolution, and the H2 evolution rate of Au100%-SAs-PAF-164 can reach 4.82 mmol g-1 h-1 with great recyclability.

Engineering Single-Atom Sites with the Irving-Williams Series for the Simultaneous Co-photocatalytic CO2 Reduction and CH3CHO Oxidation

The bonding effects between 3d transition-metal single sites and supports originate from crystal field stabilization energy (CFSE). The 3d transition-metal atoms of the spontaneous geometrical distortions, that is the Jahn-Teller effect, can alter CFSE, thereby leading to the Irving-Williams series. However, engineering single-atom sites (SASs) using the Irving-Williams series as an ideal guideline has not been reported to date. Herein, alkynyl-linked covalent phenanthroline frameworks (CPFs) with phenanthroline units are developed to anchor the desired 3d single metal ions from d5 to d10 (Mn2+, Fe3+, Co2+, Ni2+, Cu2+, and Zn2+). The Irving-Williams series was employed to accurately predict the bonding effects between 3d transition-metal atoms and phenanthroline units. To verify this, theoretical calculations and experimental results reveal that Cu-SASs/CPFs exhibits higher stability and faster charge-transfer efficiency, far surpassing other metal-SASs/CPFs. As expected, Cu-SASs/CPFs demonstrates a high photoreduction of CO2-to-CO activity (~30.3 μmol ⋅ g-1 ⋅ h-1) and an exceptional photooxidation of CH3CHO-to-CH3COOH activity (~24.7 μmol ⋅ g-1 ⋅ h-1). Interestingly, the generated *O2 - is derived from the process of CO2 reduction, thereby triggering a CH3CHO oxidation reaction. This work provides a novel design concept for designing SASs by the Irving-Williams to regulate the catalytic performances.

Room-Temperature Synthesis of Covalently Bridged MOP@TpPa-CH3 Composite Photocatalysts for Artificial Photosynthesis

The conversion of CO2 into useful chemicals via photocatalysts is a promising strategy for resolving the environmental problems caused by the addition of CO2. Herein, a series of composite photocatalysts MOP@TpPa-CH3 based on MOP-NH2 and TpPa-CH3 through covalent bridging have been prepared via a facile room-temperature evaporation method and employed for photocatalytic CO2 reduction. The photocatalytic performances of MOP@TpPa-CH3 are greater than those of TpPa-CH3 and MOP-NH2, where the CO generation rate of MOP@TpPa-CH3 under 10% CO2 still reaches 119.25 μmol g-1 h-1, which is 2.18 times higher than that under pure CO2 (54.74 μmol g-1 h-1). To investigate the structural factors affecting the photocatalytic activity, MOP@TBPa-CH3 without C═O groups is synthesized, and the photoreduction performance is also evaluated. The controlling experimental results demonstrate that the excellent photoreduction CO2 performance of MOP@TpPa-CH3 in a 10% CO2 atmosphere is due to the presence of C═O groups in TpPa-CH3. This work offers a new design and construction strategy for novel MOP@COF composites.

Ultra-highly efficient enrichment of uranium from seawater via studtite nanodots growth-elution cycle

Consecutive uranium extraction from seawater is a promising approach to secure the long-term supply of uranium and the sustainability of nuclear energy. Here, we report an ultra-highly efficient strategy via studtite nanodots growth with impressive uranyl uptake capacity of ~ 154.50 mg/g from natural seawater in 12 consecutive days (i.e., average for ~ 12.875 mg/g/day). Uranyl can be extracted as studtite under visible light via the reaction between the adsorbed uranyl and the photogenerated H2O2 with imine-based Covalent-Organic Framework photocatalysts. In detail, over Tp-Bpy, Tp-Bpy-2 and Tp-Py with multiple uranyl chelating sites, uranyl is found extracted as studtite nanodots which can be eluted readily, while over Tp-Bd and Tb-Bpy, uranyl is transformed into studtite nanorods that is more inert for elution. Abundant chelating sites of uranyl via structural regulation of COF photocatalysts are proved to facilitate the formation and efficient elution of studtite nanodots.

Inhibiting Photo-Oxidation and Enhancing Visible-Light-Driven Photocatalytic Water Oxidation over Covalent Organic Frameworks Through the Coordination of Cobalt with Bipyridine

Photocatalytic water splitting using covalent organic frameworks (COFs) is a promising approach for harnessing solar energy. However, challenges such as slow kinetic dynamics in the photocatalytic oxygen evolution reaction (OER) and COFs' self-oxidation hinder its progress. In this study, an enamine-based COF coordinated is introduced with cobalt dichloride, CoCl2 (CoCl2-TpBPy). The coordination of cobalt ions with bipyridines in CoCl2-TpBPy enhances charge-carrier separation and migration, leading to effective photocatalytic OER. Under visible light irradiation, CoCl2-TpBPy achieves a notable OER rate of up to 1 mmol·g-1·h-1, surpassing the reported organic semiconductor analogs. Additionally, CoCl2-TpBPy shows minimal nitrogen evolution compared to TpBPy and ethanol-treated TpBPy (E-TpBPy), indicating cobalt plays a pivotal role in improving charge utilization and minimizing photo-oxidation. In situ X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) analyses revealed that Co(IV) species are key to the high OER efficiency. This work highlights Co(IV) species in the efficient OER and inhibiting photo-oxidation of CoCl2-TpBPy.

Covalent Organic Framework with Donor1-Acceptor-Donor2 Motifs Regulating Local Charge of Intercalated Single Cobalt Sites for Photocatalytic CO2 Reduction to Syngas

Covalent organic framework (COF) has attracted increasing interest in photocatalytic CO2 reduction, but it remains a challenge to achieve high conversion efficiency owing to the insufficient active site and fast charge recombination. Rationally optimizing the electronic structures of COF to regulate the local charge of active sites precisely is the key point to improving catalytic performance. Herein, intercalated single Co sites coordinated by imine-N motifs have been designed by using trinuclear copper-based imine-COFs with distinct electronic moieties via a molecular engineering strategy. It is confirmed that the charge delivery property and local charge distribution of these heterometallic frameworks can be profoundly influenced by electronic structures. Among these featured structures with mixed-state copper clusters, Co/Cu3-TPA-COF stands out for an exceptional photocatalytic CO2 reduction activity and tunable syngas (CO/H2) ratio by changing various bipyridines. Experimental and theoretical results indicate that interlayer Co-imine N motifs on the donor1-acceptor-donor2 structures facilitate the formation of a highly separated electron-hole state, which effectively induces the oriented electron transfer from dual electron donors to Co centers, achieving an enhanced CO2 activation and reduction. This work opens up an avenue for the design of high-performance COF-based catalysts for photocatalytic CO2 reduction.

Tailored Cis-Trans Isomeric Metal-Covalent Organic Frameworks for Coordination Configuration-Dependent Electrochemiluminescence

Precise manipulation of the coordination configuration within substances can modulate the band structure and catalytic properties of the target material. Metal-covalent organic frameworks (MCOFs), a crystal material amalgamating the benefits of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), can integrate a predetermined coordination environment into the frameworks for amplifying the catalytic effect. In this study, we delicately synthesize isomeric MCOFs using bis(glycinato)copper as the aminoligand via kinetically and thermodynamically favorable pathways to yield cis-MCOF and trans-MCOF products, respectively, thereby introducing a cis-trans isomeric coordination field into the framework. Moreover, the twisted skeleton derived from the flexibility of amino acid and β-ketoenamine linkages endows trans-MCOF with surprising water dispersibility. Compared to cis-MCOF, the trans isomerism displays a significant enhancement in cathodic electrochemiluminescence via the catalysis of Cu nodes toward K2S2O8. The density of states analysis shows that the d-band center of trans-MCOF is closer to the Fermi level, leading to more stable adsorption binding to promote the catalysis. This study is the first report on constructing predesign coordination configuration MCOFs via an easy-handling method, which gives the guidelines for the design of amino acid-based MCOF materials.

Site-Selective Zn-Metalation in Poly-Triphenyl Amine-based Porous Organic Polymer for Solid-Gas Phase CO2 Photoreduction

Harvesting solar energy to produce value-added chemicals from carbon dioxide (CO2) presents a promising route for addressing the complexities of sustainable energy systems and environmental issues. In this context, the development of metal-coordinated porous organic polymers (POPs) offers a vital avenue for improving the photocatalytic performance of organic motifs. The current study presents a metal-integrated photocatalytic system (namely, Zn@BP-POP) developed via a one-pot Friedel-Crafts (F.C.) acylation strategy, for solid-gas phase photochemical CO2 reduction to CO (CO2RR). The postsynthetic incorporation of metal (Zn) active sites on the host polymeric backbone of BP-POP significantly influences the catalytic activity. Notably, Zn@BP-POP demonstrates good photocatalytic performance in the absence of any cocatalyst and photosensitizer yielding CO while impeding the competitive hydrogen evolution reaction (HER) from water. The experimental findings collectively propose that the observed catalytic activity and selectivity arise from the synergistic interplay between the singular zinc catalytic centers and the light-harvesting capacity of the highly conjugated polymeric backbone. Further, X-ray absorption spectroscopy (XAS) analysis has significantly highlighted the prominent role played by the ZnN2O4 single sites in the polymeric framework for activating the gaseous CO2 molecules. Further, time-dependent density functional theory (DFT) analysis also reveals the thermodynamic feasibility of CO2RR over HER under optimized reaction conditions. This work cumulatively presents an effective strategy to demonstrate the importance of metal-active sites and effectively establish their structure-activity relationship during photocatalysis.

Unprecedented POSS-Linked 3D Covalent Organic Frameworks with 2-Fold Interpenetrated scu or sqc Topology Regulated by Porphyrin Center for Photocatalytic CO2 Reduction

The synthesis and characterization of porphyrin center regulated three-dimensional covalent organic frameworks (COFs) with 2-fold interpenetrated scu or sqc topology have been investigated. These COFs exhibit unique structural features and properties, making them promising candidates for photocatalytic applications in CO2 reduction and artemisinin synthesis. The porphyrin center serves as an anchor for metal ions, allowing precise control over structures and functions of the frameworks. Furthermore, the metal coordination within the framework imparts desirable catalytic properties, enabling their potential use in photocatalytic reactions. Overall, these porphyrin center regulated metal-controlled COFs offer exciting opportunities for the development of advanced materials with tailored functionalities.

Reticular Imine-Linked Coordination Polymers Based on Paddlewheel Diruthenium/Dirhodium Nodes: Synthesis and Metal-Site Dependent Photocatalytic Reduction of CO2

The paddlewheel-type dimetal core ([M2]) is a ubiquitous motif in the nodes in coordination polymers (CPs) and metal-organic frameworks (MOFs). However, their preparation has relied on ligand-substitution-labile metal ions owing to challenges associated with crystallization. Consequently, examples featuring ligand-substitution-inert metal ions, such as Ru or Rh, are scarce. This study presents the synthesis of novel reticular imine-linked CPs incorporating the paddlewheel-type diruthenium(II, II) ([Ru2 II,II]; 1-Ru) or dirhodium(II, II) ([Rh2 II,II]; 1-Rh) subunits. The synthetic approach involved a Schiff base dehydration condensation reaction between p-formylbenzoate-bridged [Ru2 II,II] or [Rh2 II,II] precursors (i. e., CHO-Ru and CHO-Rh, respectively) and 2,5-dimethyl-1,4-phenylenediamine in a 1 : 2 ratio. The catalytic activities of 1-Ru and 1-Rh for the photochemical reduction of CO2 in a heterogeneous system depended on the metal site. The 1-Ru system exhibited exceptional selectivity, generating 3.0×104 μmol g-1 of CO after 24 h of irradiation, whereas the 1-Rh system generated a lower amount of CO (3.2×103 μmol g-1). The catalytic activity of 1-Ru ranked with that of all relevant catalytic systems. This study paves the way for the exploration of [Ru2 II,II]- or [Rh2 II,II]-based polymers with open metal site-dependent functional properties.

Rationally Designed S-Scheme CeO2/g-C3N4 Heterojunction for Promoting Visible Light Driven CO2 Photoreduction into Syngas

Exploring low-cost visible light photocatalysts for CO2 reduction to produce proportionally adjustable syngas is of great significance for meeting the needs of green chemical industry. A S-Scheme CeO2/g-C3N4 (CeO2/CN) heterojunction was constructed by using a simple two-step calcination method. During the photocatalytic CO2 reduction process, the CeO2/CN heterojunction can present a superior photocatalytic performance, and the obtained CO/H2 ratios in syngas can be regulated from 1 : 0.16 to 1 : 3.02. In addition, the CO and H2 production rate of the optimal CeO2/CN composite can reach 1169.56 and 429.12 μmol g-1 h-1, respectively. This superior photocatalytic performance is attributed to the unique S-Scheme photogenerated charge transfer mechanism between CeO2 and CN, which facilitates rapid charge separation and migration, while retaining the excellent redox capacity of both semiconductors. Particularly, the variable valence Ce3+/Ce4+ can act as electron mediator between CeO2 and CN, which can promote electron transfer and improve the catalytic performance. This work is expected to provide a new useful reference for the rational construction of high efficiency S-Scheme heterojunction photocatalyst, and improve the efficiency of photocatalytic reduction of CO2, promoting the photocatalytic reduction of CO2 into useful fuels.

Photosensitizing metal covalent organic framework with fast charge transfer dynamics for efficient CO2 photoreduction

Designing artificial photocatalysts for CO2 reduction is challenging, mainly due to the intrinsic difficulty of making multiple functional units cooperate efficiently. Herein, three-dimensional metal covalent organic frameworks (3D MCOFs) were employed as an innovative platform to integrate a strong Ru(ii) light-harvesting unit, an active Re(i) catalytic center, and an efficient charge separation configuration for photocatalysis. The photosensitive moiety was precisely stabilized into the covalent skeleton by using a rational-designed Ru(ii) complex as one of the building units, while the Re(i) center was linked via a shared bridging ligand with an Ru(ii) center, opening an effective pathway for their electronic interaction. Remarkably, the as-synthesized MCOF exhibited impressive CO2 photoreduction activity with a CO generation rate as high as 1840 μmol g-1 h-1 and 97.7% selectivity. The femtosecond transient absorption spectroscopy combined with theoretical calculations uncovered the fast charge-transfer dynamics occurring between the photoactive and catalytic centers, providing a comprehensive understanding of the photocatalytic mechanism. This work offers in-depth insight into the design of MCOF-based photocatalysts for solar energy utilization.

CO2 Photoreduction over Semiconducting 2D Materials with Supported Single Atoms: Recent Progress and Challenges

In the face of the growing energy crisis and environmental challenges, substantial efforts are now directed toward sustainable clean energy as a replacement for traditional fossil fuels. CO2 photoreduction into value-added chemicals and fuels is widely recognized as a promising approach to mitigate current energy and environmental concerns. Photocatalysts comprising single atoms (SAs) supported on two-dimensional (2D) semiconducting materials (SAs-2DSemi) have emerged as a novel frontier due to the combined merits of SA catalysts and 2D materials. In this study, we review advancements in metal SAs confined on 2DSemi substrates, categorized into four groups: (1) metal oxide-based, (2) g-C3N4-based, (3) emerging, and (4) hybridized 2DSemi, for photocatalytic CO2 conversion over the past few years. With a particular focus on highlighting the distinct advantages of SAs-2DSemi, we delve into the synthesis of state-of-the-art catalysts, their catalytic performances, and mechanistic elucidation facilitated by experimental characterizations and theoretical calculations. Following this, we outline the challenges in this field and offer perspectives on harnessing the potential of SAs-2DSemi as promising photocatalysts. This comprehensive review aims to provide valuable insights for the future development of 2D photocatalytic materials involving SAs for CO2 reduction.

Bipolaronic Motifs Induced Spatially Separated Catalytic Sites for Tunable Syngas Photosynthesis From CO2

Photocatalytic reduction of CO2 into syngas is a promising way to tackle the energy and environmental challenges; however, it remains a challenge to achieve reaction decoupling of CO2 reduction and water splitting. Therefore, efficient production of syngas with a suitable CO/H2 ratio for Fischer-Tropsch synthesis can hardly be achieved. Herein, bipolaronic motifs including Co(II)-pyridine N motifs and Co(II)-imine N motifs are rationally designed into a crystalline imine-linked 1,10-phenanthroline-5,6-dione-based covalent organic framework (bp-Co-COF) with a triazine core. These featured structures with spatially separated active sites exhibit efficient photocatalytic performance toward CO2-to-syngas conversion with a suitable CO/H2 ratio (1:1-1:3). The bipolaronic motifs enable a highly separated electron-hole state, whereby the Co(II)-pyridine N motifs tend to be the active sites for CO2 activation and accelerate the hydrogenation to form *COOH intermediates; whilst, the Co(II)-imine N motifs increase surface hydrophilicity for H2 evolution. The photocatalytic reductions of CO2 and H2O thus decouple and proceed via a concerted way on the bipolaronic motifs of bp-Co-COF. The optimal bp-Co-COF photocatalyst achieves a high syngas evolution rate of 15.8 mmol g-1 h-1 with CO/H2 ratio of 1:2, outperforming previously reported COF-based photocatalysts.

A Solar to Chemical Strategy: Green Hydrogen as a Means, Not an End

Green hydrogen is the key to the chemical industry achieving net zero emissions. The chemical industry is responsible for almost 2% of all CO2 emissions, with half of it coming from the production of simple commodity chemicals, such as NH3, H2O2, methanol, and aniline. Despite electrolysis driven by renewable power sources emerging as the most promising way to supply all the green hydrogen required in the production chain of these chemicals, in this review, it is worth noting that the photocatalytic route may be underestimated and can hold a bright future for this topic. In fact, the production of H2 by photocatalysis still faces important challenges in terms of activity, engineering, and economic feasibility. However, photocatalytic systems can be tailored to directly convert sunlight and water (or other renewable proton sources) directly into chemicals, enabling a solar-to-chemical strategy. Here, a series of recent examples are presented, demonstrating that photocatalysis can be successfully employed to produce the most important commodity chemicals, especially on NH3, H2O2, and chemicals produced by reduction reactions. The replacement of fossil-derived H2 in the synthesis of these chemicals can be disruptive, essentially safeguarding the transition of the chemical industry to a low-carbon economy.

Ligand Defect-Induced Active Sites in Ni-MOF-74 for Efficient Photocatalytic CO2 Reduction to CO

The conversion of CO2 into valuable carbon-based products using clean and renewable solar energy has been a significant challenge in photocatalysis. It is of paramount importance to develop efficient photocatalysts for the catalytic conversion of CO2 using visible light. In this study, the Ni-MOF-74 material is successfully modified to achieve a highly porous structure (Ni-74-Am) through temperature and solvent modulation. Compared to the original Ni-MOF-74, Ni-74-Am contains more unsaturated Ni active sites resulting from defects, thereby enhancing the performance of CO2 photocatalytic conversion. Remarkably, Ni-74-Am exhibits outstanding photocatalytic performance, with a CO generation rate of 1380 µmol g-1 h-1 and 94% CO selectivity under visible light, significantly surpassing the majority of MOF-based photocatalysts reported to date. Furthermore, experimental characterizations reveal that Ni-74-Am has significantly higher efficiency of photogenerated electron-hole separation and faster carrier migration rate for photocatalytic CO2 reduction. This work enriches the design and application of defective MOFs and provides new insights into the design of MOF-based photocatalysts for renewable energy and environmental sustainability. The findings of this study hold significant promise for developing efficient photocatalysts for CO2 reduction under visible-light conditions.

Synthetic Leaves Based on Crystalline Olefin-Linked Covalent Organic Frameworks for Efficient CO2 Photoreduction with Water

We report, for the first time, a new synthetic strategy for the preparation of crystalline two-dimensional olefin-linked covalent organic frameworks (COFs) based on aldol condensation between benzodifurandione and aromatic aldehydes. Olefin-linked COFs can be facilely crystallized through either a pyridine-promoted solvothermal process or a benzoic anhydride-mediated organic flux synthesis. The resultant COF leaf with high in-plane π-conjugation exhibits efficient visible-light-driven photoreduction of carbon dioxide (CO2) with water (H2O) in the absence of any photosensitizer, sacrificial agents, or cocatalysts. The production rate of carbon monoxide (CO) reaches as high as 158.1 μmol g-1 h-1 with near 100% CO selectivity, which is accompanied by the oxidation of H2O to oxygen. Both theoretical and experimental results confirm that the key lies in achieving exceptional photoinduced charge separation and low exciton binding. We anticipate that our findings will facilitate new possibilities for the development of semiconducting COFs with structural diversity and functional variability.

π-Sticked Metal‒Organic Monolayers for Single-Metal-Site Dependent CO2 Photoreduction and Hydrogen Evolution Reaction

Hierarchical self-assembly of 2D metal‒organic layers (MOLs) for the construction of advanced functional materials have witnessed considerable interest, due to the increasing atomic utilizations and well-defined atom‒property relationship. However, the construction of atomically precise MOLs with mono-/few-layered thickness through hierarchical self-assembly process remains a challenge, mostly because the elaborate long-range order is difficult to control via conventional noncovalent interaction. Herein, a quadruple π-sticked metal‒organic layer (πMOL) is reported with checkerboard-like lattice in ≈1.0 nanometre thickness, on which the catalytic selectivity can be manipulated for highly efficient CO2 reduction reaction (CO2RR) and hydrogen evolution reaction (HER) over a single metal site. In saturated CO2 aqueous acetonitrile, Fe-πMOL achieves a highly effective CO2RR with the yield of ≈3.98 mmol g‒1 h‒1 and 91.7% selectivity. In contrast, the isostructural Co-πMOL as well as mixed metallic FeCo-πMOL exhibits a high activity toward HER under similar conditions. DFT calculations reveal that single metal site exhibits the significant difference in CO2 adsorption energy and activation barrier, which triggers highly selective CO2RR for Fe site and HER for Co site, respectively. This work highlights the potential of supramolecular π…π interaction for constructing monolayer MOL materials to uniformly distribute the single metal sites for artificial photosynthesis.

Covalent Organic Frameworks as Single-Site Photocatalysts for Solar-to-Fuel Conversion

Single-site photocatalysts (SSPCs) are well-established as potent platforms for designing innovative materials to accomplish direct solar-to-fuel conversion. Compared to classical inorganic porous materials, such as zeolites and silica, covalent organic frameworks (COFs)─an emerging class of porous polymers that combine high surface areas, structural diversity, and chemical stability─are attractive candidates for SSPCs due to their molecular-level precision and intrinsic light harvesting ability, both amenable to structural engineering. In this Perspective, we summarize the design concepts and state-of-the-art strategies for the construction of COF SSPCs, and we review the development of COF SSPCs and their applications in solar-to-fuel conversion from their inception. Underlying pitfalls concerning photocatalytic characterization are discussed, and perspectives for the future development of this burgeoning field are given.

Europium(III) Functionalized Covalent Organic Framework as Sensitive and Selective Fluorescent Switch for Detection of Uranium

Uranium poses severe health risks due to its radioactivity and chemical toxicity if released into the environment. Therefore, there is an urgent demand to develop sensing materials in situ monitoring of uranium with high sensitivity and stability. In this work, a fluorescent Eu3+-TFPB-Bpy is synthesized by grafting Eu3+ cation onto TFPB-Bpy covalent organic framework (COF) synthesized through Schiff base condensation of monomers 1,3,5-tris(4-formylphenyl)benzene (TFPB) and 5,5'-diamino-2,2'-bipyridine (Bpy). The fluorescence of Eu3+-TFPB-Bpy is enhanced compared with that of TFPB-Bpy, which is originated from the intramolecular rotations of building blocks limited by the bipyridine units of TFPB-Bpy coordinated with Eu3+. More significantly, Eu3+-TFPB-Bpy is a highly efficient probe for sensing UO22+ in aqueous solution with the luminescence intensity efficiently amplified by complexation of UO22+ with Eu3+. The turn-on sensing capability was derived from the resonance energy transfer occurring from UO22+ to the Eu3+-TFPB-Bpy. The developed probe displayed desirable linear range from 5 nM to 5 μM with good selectivity and rapid response time (2 s) for UO22+ in mining wastewater. This strategy provides a vivid illustration for designing luminescence lanthanide COF hybrid materials with applications in environmental monitoring.

Stabilizing electron-rich Ni single-atoms on black phosphorus nanosheets boosts photocatalytic carbon dioxide reduction

The development of unique single-atom catalysts with electron-rich feature is essential to promoting the photocatalytic CO2 reduction, yet remains a big challenge. Here, a conceptionally new single-atom catalyst constructed from atomically dispersed Ni-P3 species on black phosphorus (BP) nanosheets (BP-Ni) is synthesized for realizing highly efficient visible-light-driven CO2 reduction when trapping photogenerated electrons from homogeneous light absorbers in the presence of triethanolamine as the sacrificial agent. Both the experimental and theoretical calculation data reveal that the Ni-P3 species on BP nanosheets own the electron-rich feature that can improve the photogenerated charge separation efficiency and lower the activation barrier of CO2 conversion. This unique feature makes BP-Ni exhibit the much higher activity as cocatalyst in the photocatalytic CO2 reduction than BP nanosheets. The BP-Ni can also be applied as a cocatalyst for enhanced photocatalytic CO2 reduction after combining with CdSe/S colloidal crystal photocatalyst. The present study offers valuable inspirations for the design and construction of effective catalytic sites toward photocatalytic CO2 reduction reactions.

Photocatalytic CO2 reduction by topologically matched polymer-polymer heterojunction nanosheets

Conversion of solar energy into chemical fuel can be achieved through a number of routes but direct conversion, via photocatalysis, is potentially the simplest and cheapest route to the transformation of low-value substances, water and CO2, to useful chemical fuels or feedstocks such as hydrogen, formate, methanol, and syngas. 2D polymers, including carbon nitrides and COFs, have emerged as one of the most promising classes of organic photocatalysts for solar fuels production due to their energetic tunability, charge transport properties and robustness. They are, however, difficult to process and so there have been limited studies into the formation of heterojunction materials incorporating these components. In this work we use our novel templating approach to combine topologically matched imine-based donor polymers with acceptor polymers formed through Knoevenagel condensation. An efficient heterojunction interface was formed by matching the isostructural nodes and linkers that make up the D1 and A1 semiconductors and this was reflected in the increased photocatalytic activity of the heterojunction material T1. Tuning of the templating synthesis route to give heterojunctions with optimised donor : acceptor ratios, as well as the photocatalytic conditions, resulted in CO production rates that were between 1.5 and 10 times higher than those of the individual polymers. A further set of polymers A5 and D5 were developed with more optimised structures for CO2 reduction including increased overpotential for the reduction reaction and the presence of co-catalyst chelating groups. These had increased activity compared to the group 1 family and again showed higher activity for CO production by the templated heterojunction, T5, than either individual component or a physical mixture of the donor and acceptor.

Enhancing Photocatalytic CO2 Conversion through Oxygen-Vacancy-Mediated Topological Phase Transition

Weak adsorption of gas reactants and strong binding of intermediates present a significant challenge for most transition metal oxides, particularly in the realm of CO2 photoreduction. Herein, we demonstrate that the adsorption can be fine-tuned by phase engineering of oxide catalysts. An oxygen vacancy mediated topological phase transition in Ni-Co oxide nanowires, supported on a hierarchical graphene aerogel (GA), is observed from a spinel phase to a rock-salt phase. Such in situ phase transition empowers the Ni-Co oxide catalyst with a strong internal electric field and the attainment of abundant oxygen vacancies. Among a series of catalysts, the in situ transformed spinel/rock-salt heterojunction supported on GA stands out for an exceptional photocatalytic CO2 reduction activity and selectivity, yielding an impressive CO production rate of 12.5 mmol g-1  h-1 and high selectivity of 96.5 %. This remarkable performance is a result of the robust interfacial coupling between two topological phases that optimizes the electronic structures through directional charge transfer across interfaces. The phase transition process induces more Co2+ in octahedral site, which can effectively enhance the Co-O covalency. This synergistic effect balances the surface activation of CO2 molecules and desorption of reaction intermediates, thereby lowering the energetic barrier of the rate-limiting step.

Stacked Covalent Organic Ribbons Perpendicular to Graphene Oxide Sheets; a 1D-p-2D Design for Photocatalytic Tandem Reactions

Development of one dimensional covalent organic frameworks (1D-COFs) with potential in light absorption and catalysis is still challenging, due to their rapid interpenetration to form 2D and 3D porous structures. Here we report a successful synthesis of imine-linked 1D covalent organic ribbons (COR), using two simple linear building blocks 1,4-Benzenediamine (Bda) and [2,2'-Bipyridine]-5,5'-dicarbaldehyde (Bpy). The obtained 1D structure with nanorod morphology could keep its physicochemical characteristic properties when it is perpendicular to the surface of graphene oxide (GO) sheets (1D-p-2D structure). Due to an AB π- π stacking and efficient charge transfer between perpendicular 1D COR and GO sheets, the obtained nanocomposite showed strong visible light absorbance (400-700 nm) with coefficient of 4.400 M-1  cm-1 and decreased recombination rate of photogenerated reactive species by 92 %. The strategy of 1D-p-2D light driven system greatly enhanced the photocatalytic activity in practical applications such as both oxidation and hydrogenation tandem reactions to a rate constant of higher than 0.02 min-1 . This study presents the first case of 1D covalent organic polymers grown perpendicularly on a carbon-based layer for boosting electron mobility through the junction between the two components.

Expanding Olefin-Linked Covalent Organic Frameworks toward Selective Photocatalytic Oxidation of Organic Sulfides

Olefin-linked covalent organic frameworks (COFs) have exhibited great potential in visible-light photocatalysis. In principle, expanding fully conjugated COFs can facilitate light absorption and charge transfer, leading to improved photocatalysis. Herein, three olefin-linked COFs with the same topology are synthesized by combining 2,4,6-trimethyl-1,3,5-triazine (TMT) with 1,3,5-triformylbenzene (TFB), 1,3,5-tris(4-formylphenyl)benzene (TFPB), and 1,3,5-tris(4-formylphenylethynyl)benzene (TFPEB), namely, TMT-TFB-COF, TMT-TFPB-COF, and TMT-TFPEB-COF, respectively. From TMT-TFB-COF to TMT-TFPB-COF, expanding phenyl rings provides only limited expansion for π-conjugation due to the steric effect of structural twisting. However, from TMT-TFPB-COF to TMT-TFPEB-COF, the insertion of acetylenes eliminates the steric effect and provides more delocalized π-electrons. As such, TMT-TFPEB-COF exhibits the best optoelectronic properties among these three olefin-linked COFs. Consequently, the photocatalytic performance of TMT-TFPEB-COF is much better than those of TMT-TFB-COF and TMT-TFPB-COF on the oxidation of organic sulfides into sulfoxides with oxygen. The desirable reusability and substrate compatibility of the TMT-TFPEB-COF photocatalyst are further confirmed. The selective formation of organic sulfoxides over TMT-TFPEB-COF under blue light irradiation proceeds via both electron- and energy-transfer pathways. This work highlights a rational design of expanding the π-conjugation of fully conjugated COFs toward selective visible-light photocatalysis.

Single-Atom Catalysts on Covalent Organic Frameworks for Energy Applications

Single-atom catalysts (SACs) have been investigated and applied to energy conversion devices. However, issues of metal agglomeration, low metal loading, and substrate stability have hindered realization of the SACs' full potential. Recently, covalent organic framework (COF)-based SACs have emerged as promising materials to enable highly efficient catalytic reactions. Here, we summarize the representative COF-based SACs and their wide application in clean energy devices and conversion reactions, such as hydrogen evolution reaction, carbon dioxide reduction reaction, nitrogen reduction reaction, oxygen reduction reaction, and oxygen evolution reaction. Based on their catalysis conditions, these reactions are categorized into photocatalyzed and electrocatalyzed reactions. We also summarize their design strategies, including heteroatom inclusion, donor-acceptor pairs, pore engineering, interface engineering, etc. Although COF-based SACs are promising, more efforts, such as linkage engineering, functional groups, ionization, multifunctional sites for cocatalyzed systems, etc., could improve them to be the ideal SAC materials. At the end, we provide our perspectives on where the field will proceed in the next 5 years.

Exploring a Ni-N4 Active Site-Based Conjugated Microporous Polymer Z-Scheme Heterojunction Through Covalent Bonding for Visible Light-Driven Photocatalytic CO2 Conversion in Pure Water

Designing photocatalysts with efficient charge transport and abundant active sites for photocatalytic CO2 reduction in pure water is considered a potential approach. Herein, a nickel-phthalocyanine containing Ni-N4 active sites-based conjugated microporous polymer (NiPc-CMP), offering highly dispersed metal active sites, satisfactory CO2 adsorption capability, and excellent light harvesting properties, is engineered as a photocatalyst. By virtue of the covalently bonded bridge, an atomic-scale interface between the NiPc-CMP/Bi2 WO6 Z-scheme heterojunction with strong chemical interactions is obtained. The interface creates directional charge transport highways and retains a high redox potential, thereby enhancing the photoexcited charge carrier separation and photocatalytic efficiency. Consequently, the optimal NiPc-CMP/Bi2 WO6 (NCB-3) achieves efficient photocatalytic CO2 reduction performance in pure water under visible-light irradiation without any sacrificial agent or photosensitizer, affording a CO generation rate of 325.9 µmol g-1 with CO selectivity of 93% in 8 h, outperforming those of Bi2 WO6 and NiPc-CMP, individually. Experimental and theoretical calculations reveal the promotion of interfacial photoinduced electron separation and the role of Ni-N4 active sites in photocatalytic reactions. This study presents a high-performance CMP-based Z-scheme heterojunction with an effective interfacial charge-transfer route and rich metal active sites for photocatalytic CO2 conversion.

Single Cobalt Ion-Immobilized Covalent Organic Framework for Lithium-Sulfur Batteries with Enhanced Rate Capabilities

Covalent organic frameworks (COFs) are notable for their remarkable structure, function designability, and tailorability, as well as stability, and the introduction of "open metal sites" ensures the efficient binding of small molecules and activation of substrates for heterogeneous catalysis and energy storage. Herein, we use the postsynthetic metal sites to catalyze polysulfide conversion and to boost the binding affinity to active matter for lithium-sulfur batteries (LSBs). A dual-pore COF, USTB-27, with hxl topology has been successfully assembled from the imine chemical reaction between 2,3,8,9,14,15-hexa(4-formylphenyl)diquinoxalino [2,3-a:2',3'-c]phenazine and [2,2'-bipyridine]-5,5'-diamine. The chelating nitrogen sites of both modules are able to postsynthetically functionalize with single cobalt sites to generate USTB-27-Co. The discharge capacity of the sulfur-loaded S@USTB-27-Co composite in a LSB is 1063, 945, 836, 765, 696, and 644 mA h g-1 at current densities of 0.1, 0.2, 0.5, 1.0, 2.0, and 5.0 C, respectively, much superior to that of non-cobalt-functionalized species S@USTB-27. Following the increased current densities, the rate performance of S@USTB-27-Co is much better than that of S@USTB-27. In particular, the capacity retention at 5.0 C has a magnificent increase from 19% for the latter species to 61% for the former one. Moreover, S@USTB-27-Co exhibits a higher specific capacity of 543 mA h g-1 than that of S@USTB-27 (402 mA h g-1) at a current density of 1.0 C after electrochemical cycling for 500 runs. This work illustrates the "open metal sites" strategy to engineer the active chemical component conversion in COF channels as well as their binding strength for specific applications.

Ultrathin covalent organic framework nanosheets for enhanced photocatalytic water oxidation

Photocatalytic water oxidation is a key half-reaction for various solar-to-fuel conversion systems but requires simultaneous water affinity and hole accumulation at the photocatalytic site. Here, we present the rational design and synthesis of an ionic-type covalent organic framework (COF) named tetraphenylporphyrin cobalt and cobalt bipyridine complex (CoTPP-CoBpy3) COF, combining cobalt porphyrin and cobalt bipyridine building blocks as a photocatalyst for water oxidation. The good dispersibility of porous large-size (>2 micrometers) COF nanosheets (≈1.45 nanometers) facilitates local water collection; the ultrafast triplet-state charge transfer (1.8 picoseconds) and prolonged charge separation (1.2 nanoseconds) further contribute to the efficient accumulation of holes in the CoTPP moiety, leading to a photocatalytic dioxygen production rate of 7323 micromoles per gram per hour. Moreover, we have identified an end-on superoxide radical (O2·) intermediate at the active site of the CoTPP moiety and proposed an electron-intermediate cascade mechanism that elucidates the synergistic coupling of electron relay (S1-T1-T1') and intermediate evolution during the photocatalytic process.

Covalent Organic Frameworks for the Purification of Recombinant Enzymes and Heterogeneous Biocatalysis

Recombinant enzymes have gained prominence due to their diverse functionalities and specificity and are often a greener alternative in biocatalysis. This context makes purifying recombinant enzymes from host cells and other impurities crucial. The primary goal is to isolate the pure enzyme of interest and ensure its stability under ambient conditions. Covalent organic frameworks (COFs), renowned for their well-ordered structure and permeability, offer a promising approach for purifying histidine-tagged (His-tagged) enzymes. Furthermore, immobilizing enzymes within COFs represents a growing field in heterogeneous biocatalysis. In this study, we have developed a flow-based technology utilizing a nickel-infused covalent organic framework (Ni-TpBpy COF) to combine two distinct processes: the purification of His-tagged enzymes and the immobilization of enzymes simultaneously. Our work primarily focuses on the purification of three His-tagged enzymes β-glucosidase, cellobiohydrolase, and endoglucanase as well as two proteins with varying molecular weights, namely, green fluorescent protein (27 kDa) and BG Rho (88 kDa). We employed Ni-TpBpy as a column matrix to showcase the versatility of our system. Additionally, we successfully obtained a Ni-TpBpy COF immobilized with enzymes, which can serve as a heterogeneous catalyst for the hydrolysis of p-nitrophenyl-β-d-glucopyranoside and carboxymethylcellulose. These immobilized enzymes demonstrated catalytic activity comparable to that of their free counterparts, with the added advantages of recyclability and enhanced stability under ambient conditions for an extended period, ranging from 60 to 90 days. This contrasts with the free enzymes, which do not maintain their activity as effectively over time.

Photocatalytic Conversion of Diluted CO2 into Tunable Syngas via Modulating Transition Metal Hydroxides

The conversion of diluted CO2 into tunable syngas via photocatalysis is critical for implementing CO2 reduction practically, although the efficiency remains low. Herein, we report the use of graphene-modified transition metal hydroxides, namely, NiXCo1-X-GR, for the conversion of diluted CO2 into syngas with adjustable CO/H2 ratios, utilizing Ru dyes as photosensitizers. The Ni(OH)2-GR cocatalyst can generate 12526 μmol g-1 h-1 of CO and 844 μmol g-1 h-1 of H2, while the Co(OH)2-GR sample presents a generation rate of 2953 μmol g-1 h-1 for CO and 10027 μmol g-1 h-1 for H2. Notably, by simply altering the addition amounts of nickel and cobalt in the transition metal composite, the CO/H2 ratios in syngas can be easily regulated from 18:1 to 1:4. Experimental characterization of composites and DFT calculations suggest that the differing adsorption affinities of CO2 and H2O over Ni(OH)2-GR and Co(OH)2-GR play a significant role in determining the selectivity of CO and H2 products, ultimately affecting the CO/H2 ratios in syngas. Overall, these findings demonstrate the potential of graphene-modified transition metal hydroxides as efficient photocatalysts for CO2 reduction and syngas production.

Emerging Xene-Based Single-Atom Catalysts: Theory, Synthesis, and Catalytic Applications

In recent years, the emergence of novel 2D monoelemental materials (Xenes), e.g., graphdiyne, borophene, phosphorene, antimonene, bismuthene, and stanene, has exhibited unprecedented potentials for their versatile applications as well as addressing new discoveries in fundamental science. Owing to their unique physicochemical, optical, and electronic properties, emerging Xenes have been regarded as promising candidates in the community of single-atom catalysts (SACs) as single-atom active sites or support matrixes for significant improvement in intrinsic activity and selectivity. In order to comprehensively understand the relationships between the structure and property of Xene-based SACs, this review represents a comprehensive summary from theoretical predictions to experimental investigations. Firstly, theoretical calculations regarding both the anchoring of Xene-based single-atom active sites on versatile support matrixes and doping/substituting heteroatoms at Xene-based support matrixes are briefly summarized. Secondly, controlled synthesis and precise characterization are presented for Xene-based SACs. Finally, current challenges and future opportunities for the development of Xene-based SACs are highlighted.

Contemporary advances in photocatalytic CO2 reduction using single-atom catalysts supported on carbon-based materials

The persistent issue of CO2 emissions and their subsequent impact on the Earth's atmosphere can be effectively addressed through the utilization of efficient photocatalysts. Employing a sustainable carbon cycle via photocatalysis presents a promising technology for simultaneously managing the greenhouse effect and the energy dilemma. However, the efficiency of energy conversion encounters limitations due to inadequate carrier utilization and a deficiency of reactive sites. Single-atom catalysts (SACs) have demonstrated exceptional performance in efficiently addressing the aforementioned challenges. This review article commences with an overview of SAC types, structures, fundamentals, synthesis strategies, and characterizations, providing a logical foundation for the design and properties of SACs based on the correlation between their structure and efficiency. Additionally, we delve into the general mechanism and the role of SACs in photocatalytic CO2 reduction. Furthermore, we furnish a comprehensive survey of the latest advancements in SACs concerning their capacity to enhance efficiency, long-term stability, and selectivity in CO2 reduction. Carbon-structured support materials such as covalent organic frameworks (COFs), graphitic carbon nitride (g-C3N4), metal-organic frameworks (MOFs), covalent triazine frameworks (CTFs), and graphene-based photocatalysts have garnered significant attention due to their substantial surface area, superior conductivity, and chemical stability. These carbon-based materials are frequently chosen as support matrices for anchoring single metal atoms, thereby enhancing catalytic activity and selectivity. The motivation behind this review article lies in evaluating recent developments in photocatalytic CO2 reduction employing SACs supported on carbon substrates. In conclusion, we highlight critical issues associated with SACs, potential prospects in photocatalytic CO2 reduction, and existing challenges. This review article is dedicated to providing a comprehensive and organized compilation of recent research findings on carbon support materials for SACs in photocatalytic CO2 reduction, with a specific focus on materials that are environmentally friendly, readily accessible, cost-effective, and exceptionally efficient. This work offers a critical assessment and serves as a systematic reference for the development of SACs supported on MOFs, COFs, g-C3N4, graphene, and CTFs support materials to enhance photocatalytic CO2 conversion.

Progress and Perspectives on Promising Covalent-Organic Frameworks (COFs) Materials for Energy Storage Capacity

In recent years, a new class of highly crystalline advanced permeable materials covalent-organic frameworks (COFs) have garnered a great deal of attention thanks to their remarkable properties, such as their large surface area, highly ordered pores and channels, and controllable crystalline structures. The lower physical stability and electrical conductivity, however, prevent them from being widely used in applications like photocatalytic activities and innovative energy storage and conversion devices. For this reason, many studies have focused on finding ways to improve upon these interesting materials while also minimizing their drawbacks. This review article begins with a brief introduction to the history and major milestones of COFs development before moving on to a comprehensive exploration of the various synthesis methods and recent successes and signposts of their potential applications in carbon dioxide (CO2 ) sequestration, supercapacitors (SCs), lithium-ion batteries (LIBs), and hydrogen production (H2 -energy). In conclusion, the difficulties and potential of future developing with highly efficient COFs ideas for photocatalytic as well as electrochemical energy storage applications are highlighted.

Design of porphyrin-based frameworks for efficient visible light-promoted reduction of CO2 from dilute gas: Combined experimental and theoretical investigation

The photocatalytic carbon dioxide reduction (CO2R) coupled with hydrogen evolution reaction (HER) constitutes a promising step for a sustainable generation of syngas (CO + H2), an essential feedstock for the preparation of several commodity chemicals. Herein, visible light/sunlight-promoted catalytic reduction of CO2 and protons to syngas using rationally designed porphyrin-based 2D porous organic frameworks, POF(Co/Zn) is demonstrated. Indeed, POF(Co) showed superior catalytic performance over the Zn counterpart with CO and H2 generation rates of 1104 and 3981 μmol g-1h-1, respectively. The excellent catalytic performance of Co-based POF is aided by the favorable transfer of photo-excited electrons from Ru-sensitizer to the CoII catalytic site, which is not feasible in the case of POF(Zn), revealed from the theoretical investigation. More importantly, the POF(Co) catalyzes the reduction of CO2 even from dilute gas (13% CO2), surpassing most reported framework-based photocatalytic systems. Significantly, the catalytic performance of POF(Co) was increased under natural sunlight conditions suggesting sunlight-promoted enhancement in syngas generation. The in-depth theoretical investigation further unveiled the comprehensive mechanistic pathway of the light-promoted concurrent CO and H2 generation. This work showcases the advantages of porphyrin-based frameworks for visible light/sunlight-promoted syngas generation by utilizing greenhouse gas (CO2) and protons under mild eco-friendly conditions.

Covalent organic frameworks bearing Ni active sites for free radical-mediated photoelectrochemical organic transformations

Photoelectrochemical (PEC) organic transformations occurring at anodes are a promising strategy for circumventing the sluggish kinetics of the oxygen evolution reaction. Here, we report a free radical-mediated reaction instead of direct hole transfer occurring at the solid/liquid interface for PEC oxidation of benzyl alcohol (BA) to benzaldehyde (BAD) with high selectivity. A bismuth vanadate (BiVO4) photoanode coated with a 2,2'-bipyridine-based covalent organic framework bearing single Ni sites (Ni-TpBpy) was developed to drive the transformation. Experimental studies reveal that the reaction at the Ni-TpBpy/BiVO4 photoanode followed first-order reaction kinetics, boosting the formation of surface-bound ·OH radicals, which suppressed further BAD oxidation and provided a nearly 100% selectivity and a rate of 80.63 μmol hour-1 for the BA-to-BAD conversion. Because alcohol-to-aldehyde conversions are involved in the valorizations of biomass and plastics, this work is expected to open distinct avenues for producing key intermediates of great value.

Recent Progress of Covalent Organic Frameworks-Based Materials in Photocatalytic Applications: A Review

Covalent organic frameworks (COFs) are one type of porous organic materials linked by covalent bonds. COFs materials exhibit many outstanding characteristics such as high porosity, high chemical and thermal stability, large specific surface area, efficient electron transfer efficiency, and the ability for predesigned structures. These exceptional advantages enable COFs materials to exhibit remarkable performance in photocatalysis. Additionally, the activity of COFs materials as photocatalysts can be significantly upgraded by ion doping and the formation of heterojunctions. This paper summarizes the latest research progress on COF-based materials applied in photocatalytic systems. Initially, typical structures and preparation methods of COFs are analyzed and compared. Moreover, the essential principles of photocatalytic reactions over COFs-based materials and the latest research developments in photocatalytic hydrogen production, CO2 reduction, pollutants elimination, organic transformation, and overall water splitting are indicated. At last, the outlook and challenges of COF-based materials in photocatalysis are discussed. This review is intended to permit instructive guidance for the efficient use of photocatalysis based on COFs in the future.

Highly Enhancing CO2 Photoreduction by Metallization of an Imidazole-linked Robust Covalent Organic Framework

Converting CO2 into value-added chemicals to solve the issues caused by carbon emission is promising but challenging. Herein, by embedding metal ions (Co2+ , Ni2+ , Cu2+ , and Zn2+ ) into an imidazole-linked robust photosensitive covalent organic framework (PyPor-COF), effective photocatalysts for CO2 conversion are rationally designed and constructed. Characterizations display that all of the metallized PyPor-COFs (M-PyPor-COFs) display remarkably high enhancement in their photochemical properties. Photocatalysis reactions reveal that the Co-metallized PyPor-COF (Co-PyPor-COF) achieves a CO production rate as high as up to 9645 µmol g-1 h-1 with a selectivity of 96.7% under light irradiation, which is more than 45 times higher than that of the metal-free PyPor-COF, while Ni-metallized PyPor-COF (Ni-PyPor-COF) can further tandem catalyze the generated CO to CH4 with a production rate of 463.2 µmol g-1 h-1 . Experimental analyses and theory calculations reveal that their remarkable performance enhancement on CO2 photoreduction should be attributed to the incorporated metal sites in the COF skeleton, which promotes the adsorption and activation of CO2 and the desorption of generated CO and even reduces the reaction energy barrier for the formation of different intermediates. This work demonstrates that by metallizing photoactive COFs, effective photocatalysts for CO2 conversion can be achieved.

Photocatalytic CO2 reduction to syngas using metallosalen covalent organic frameworks

Metallosalen-covalent organic frameworks have recently gained attention in photocatalysis. However, their use in CO2 photoreduction is yet to be reported. Moreover, facile preparation of metallosalen-covalent organic frameworks with good crystallinity remains considerably challenging. Herein, we report a series of metallosalen-covalent organic frameworks produced via a one-step synthesis strategy that does not require vacuum evacuation. Metallosalen-covalent organic frameworks possessing controllable coordination environments of mononuclear and binuclear metal sites are obtained and act as photocatalysts for tunable syngas production from CO2. Metallosalen-covalent organic frameworks obtained via one-step synthesis exhibit higher crystallinity and catalytic activities than those obtained from two-step synthesis. The optimal framework material containing cobalt and triazine achieves a syngas production rate of 19.7 mmol g-1 h-1 (11:8 H2/CO), outperforming previously reported porous crystalline materials. This study provides a facile strategy for producing metallosalen-covalent organic frameworks of high quality and can accelerate their exploration in various applications.

Porosity as a Design Element for Developing Catalytic Molecular Materials for Electrochemical and Photochemical Carbon Dioxide Reduction

The catalytic reduction of carbon dioxide (CO2 ) using sustainable energy inputs is a promising strategy for upcycling of atmospheric carbon into value-added chemical products. This goal has inspired the development of catalysts for selective and efficient CO2 conversion using electrochemical and photochemical methods. Among the diverse array of catalyst systems designed for this purpose, 2D and 3D platforms that feature porosity offer the potential to combine carbon capture and conversion. Included are covalent organic frameworks (COFs), metal-organic frameworks (MOFs), porous molecular cages, and other hybrid molecular materials developed to increase active site exposure, stability, and water compatibility while maintaining precise molecular tunability. This mini-review showcases catalysts for the CO2 reduction reaction (CO2 RR) that incorporate well-defined molecular elements integrated into porous materials structures. Selected examples provide insights into how different approaches to this overall design strategy can augment their electrocatalytic and/or photocatalytic CO2 reduction activity.

A Fully Conjugated Covalent Organic Framework with Oxidative and Reductive Sites for Photocatalytic Carbon Dioxide Reduction with Water

Constructing a powerful photocatalytic system that can achieve the carbon dioxide (CO2 ) reduction half-reaction and the water (H2 O) oxidation half-reaction simultaneously is a very challenging but meaningful task. Herein, a porous material with a crystalline topological network, named viCOF-bpy-Re, was rationally synthesized by incorporating rhenium complexes as reductive sites and triazine ring structures as oxidative sites via robust -C=C- bond linkages. The charge-separation ability of viCOF-bpy-Re is promoted by low polarized π-bridges between rhenium complexes and triazine ring units, and the efficient charge-separation enables the photogenerated electron-hole pairs, followed by an intramolecular charge-transfer process, to form photogenerated electrons involved in CO2 reduction and photogenerated holes that participate in H2 O oxidation simultaneously. The viCOF-bpy-Re shows the highest catalytic photocatalytic carbon monoxide (CO) production rate (190.6 μmol g-1  h-1 with about 100 % selectivity) and oxygen (O2 ) evolution (90.2 μmol g-1 h-1 ) among all the porous catalysts in CO2 reduction with H2 O as sacrificial agents. Therefore, a powerful photocatalytic system was successfully achieved, and this catalytic system exhibited excellent stability in the catalysis process for 50 hours. The structure-function relationship was confirmed by femtosecond transient absorption spectroscopy and density functional theory calculations.

Covalent Organic Frameworks for Energy Conversion in Photocatalysis

Intensifying energy crises and severe environmental issues have led to the discovery of renewable energy sources, sustainable energy conversion, and storage technologies. Photocatalysis is a green technology that converts eco-friendly solar energy into high-energy chemicals. Covalent organic frameworks (COFs) are porous materials constructed by covalent bonds that show promising potential for converting solar energy into chemicals owing to their pre-designable structures, high crystallinity, and porosity. Herein, we highlight recent progress in the synthesis of COF-based photocatalysts and their applications in water splitting, CO2 reduction, and H2 O2 production. The challenges and future opportunities for the rational design of COFs for advanced photocatalysts are discussed. This Review is expected to promote further development of COFs toward photocatalysis.

A π-conjugated covalent organic framework enables interlocked nickel/photoredox catalysis for light-harvesting cross-coupling reactions

Covalent organic frameworks (COFs) are an outstanding platform for heterogeneous photocatalysis. Herein, we synthesized a pyrene-based two-dimensional C[double bond, length as m-dash]C linked π-conjugated COF via Knoevenagel condensation and anchored Ni(ii)-centers through bipyridine moieties. Instead of traditional dual metallaphotoredox catalysis, the mono-metal decorated Ni@Bpy-sp2c-COF interlocked the catalysis mediated by light and the transition metal. Under light irradiation, enhanced energy and electron transfer in the COF backbone, as delineated by the photoluminescence, electrochemical, and control experiments, expedited the excitation of Ni centers to efficiently catalyze diverse photocatalytic C-X (X = B, C, N, O, P, S) cross-coupling reactions with efficiencies orders of magnitude higher than the homogeneous controls. The COF catalyst tolerated a diverse range of coupling partners with various steric and electronic properties, delivering the products with up to 99% yields. Some reactions were performed on a gram scale and were applied to diversify pharmaceuticals and complex molecules to demonstrate the synthetic utility.

Postsynthetic Annulation of Three-Dimensional Covalent Organic Frameworks for Boosting CO2 Photoreduction

Three-dimensional covalent organic frameworks (3D COFs), with interconnected pores and exposed functional groups, provide new opportunities for the design of advanced functional materials through postsynthetic modification. Herein, we demonstrate the successful postsynthetic annulation of 3D COFs to construct efficient CO₂ reduction photocatalysts. Two 3D COFs, NJU-318 and NJU-319Fe, were initially constructed by connecting hexaphenyl-triphenylene units with pyrene- or Fe-porphyrin-based linkers. Subsequently, the hexaphenyl-triphenylene moieties within the COFs were postsynthetically transformed into π-conjugated hexabenzo-trinaphthylene (pNJU-318 and pNJU-319Fe) to enhance visible light absorption and CO₂ photoreduction activity. The optimized photocatalyst, pNJU-319Fe, shows a CO yield of 688 μmol g^-1, representing a 2.5-fold increase compared to that of unmodified NJU-319Fe. Notably, the direct synthesis of hexabenzo-trinaphthylene-based COF catalysts was unsuccessful due to the low solubility of conjugated linkers. This study not only provides an effective method to construct photocatalysts but also highlights the unlimited tunability of 3D COFs through structural design and postsynthetic modification.

Recent Progress of Single-Atom Photocatalysts Applied in Energy Conversion and Environmental Protection

Photocatalysis driven by solar energy is a feasible strategy to alleviate energy crises and environmental problems. In recent years, significant progress has been made in developing advanced photocatalysts for efficient solar-to-chemical energy conversion. Single-atom catalysts have the advantages of highly dispersed active sites, maximum atomic utilization, unique coordination environment, and electronic structure, which have become a research hotspot in heterogeneous photocatalysis. This paper introduces the potential supports, preparation, and characterization methods of single-atom photocatalysts in detail. Subsequently, the fascinating effects of single-atom photocatalysts on three critical steps of photocatalysis (the absorption of incident light to produce electron-hole pairs, carrier separation and migration, and interface reactions) are analyzed. At the same time, the applications of single-atom photocatalysts in energy conversion and environmental protection (CO₂ reduction, water splitting, N₂ fixation, organic macromolecule reforming, air pollutant removal, and water pollutant degradation) are systematically summarized. Finally, the opportunities and challenges of single-atom catalysts in heterogeneous photocatalysis are discussed. It is hoped that this work can provide insights into the design, synthesis, and application of single-atom photocatalysts and promote the development of high-performance photocatalytic systems.

Engineering Single Cu Sites into Covalent Organic Framework for Selective Photocatalytic CO2 Reduction

Photocatalytic CO₂ conversion into value-added chemicals is a promising route but remains challenging due to poor product selectivity. Covalent organic frameworks (COFs) as an emerging class of porous materials are considered as promising candidates for photocatalysis. Incorporating metallic sites into COF is a successful strategy to realize high photocatalytic activities. Herein, 2,2'-bipyridine-based COF bearing non-noble single Cu sites is fabricated by chelating coordination of dipyridyl units for photocatalytic CO₂ reduction. The coordinated single Cu sites not only significantly enhance light harvesting and accelerate electron-hole separation but also provide adsorption and activation sites for CO₂ molecules. As a proof of concept, the Cu-Bpy-COF as a representative catalyst exhibits superior photocatalytic activity for reducing CO₂ to CO and CH₄ without photosensitizer, and impressively, the product selectivity of CO and CH₄ can be readily modulated only by changing reaction media. Experimental and theoretical results reveal the crucial role of single Cu sites in promoting photoinduced charge separation and solvent effect in regulating product selectivity, which provides an important sight onto the design of COF photocatalysts for selective CO₂ photoreduction.

Covalent Organic Framework-Semiconductor-Based Heterostructures for Photocatalytic Applications

Photocatalysis is a promising and sustainable technology in the fields of energy conversion/storage and environment purification; however, the utilization of individual component as photocatalyst is generally restricted due to the low catalytic activity deriving from the rapid recombination of photogenerated electrons/holes. Covalent organic framework (COF)-semiconductor-based composite photocatalysts with synergistic effects provide a feasible route to achieve high-performance photocatalytic reactions with more active sites, strong light utilization ability, and high stability. In recent years, significant progress has been made in the rational design and preparation of the COF-semiconductors-based heterostructures for photocatalytic water splitting, carbon dioxide (CO₂ ) reduction, and dye/pollutant degradation. In this Review, the synthetic strategies of COF-semiconductor-based heterostructures are first introduced, which includes the rational design of the morphology, connection modes, and type of heterojunctions. The performance of COF-semiconductor-based heterostructures in different photocatalytic reactions are comprehensively reviewed. The structure-activity relationship and the synergistic effects within the heterostructures are discussed, and the photocatalytic mechanism and the role of COFs during the photocatalytic process are also presented. Finally, an outlook and challenges of realizing COF-semiconductor-based heterostructures with simple synthesis methods, diverse functions, high performance, and well-defined reaction mechanisms are provided.

Organic Covalent Interaction-based Frameworks as Emerging Catalysts for Environment and Energy Applications: Current Scenario and Opportunities

The term "covalent organic framework" (COF) refers to a class of porous organic polymeric materials made from organic building blocks that have been covalently bonded. The preplanned and predetermined bonding of the monomer linkers allow them to demonstrate directional flexibility in two- or three-dimensional spaces. COFs are modern materials, and the discovery of new synthesis and linking techniques has made it possible to prepare them with a variety of favorable features and use them in a range of applications. Additionally, they can be post-synthetically altered or transformed into other materials of particular interest to produce compounds with enhanced chemical and physical properties. Because of its tunability in different chemical and physical states, post-synthetic modifications, high stability, functionality, high porosity and ordered geometry, COFs are regarded as one of the most promising materials for catalysis and environmental applications. This study highlights the basic advancements in establishing the stable COFs structures and various post-synthetic modification approaches. Further, the photocatalytic applications, such as organic transformations, degradation of emerging pollutants and removal of heavy metals, production of hydrogen and Conversion of carbon dioxide (CO₂ ) to useful products have also been presented. Finally, the future research directions and probable outcomes have also been summarized, by focusing their promises for specialists in a variety of research fields.