Spiro-Functionalized Diphenylethenes: Suppression of a Reversible Photocyclization Contributes to the Aggregation-Induced Emission Effect

Preparation of cellulose-based fluorescent aggregations with various morphologies and their microstructure-correlated fluorescence behavior

We provided an efficient method for preparing fluorescent materials with high specificity. Firstly, the cellulose-based aggregations with adjustable morphologies and sizes were obtained by cross-linking copolymerization and self-assembly. Then, after encapsulating the fluorescein isothiocyanate (FITC) into the hydrophobic microregions of the cellulose-based aggregations by ultrasound/dialysis method, a series of cellulose-based fluorescent aggregations with different morphologies was obtained. The flower-like, tentacle-like, microsphere, hollow sphere, coral-like and solid sphere fluorescent aggregations could be obtained by changing the mass ratio of cellulose to gelatin, the degree of alkylation and the length of the alkyl chain. Scanning electron microscope (SEM), Dynamic light scattering (DLS), UV-vis and Zeta potential confirmed the formation of the cellulose-based aggregations with different morphologies and sizes, which provided basis for the successful encapsulation of FITC. The flower-like fluorescent aggregation showed the maximum fluorescence intensity. This was due to the rigid structure of cellulose, electrostatic repulsion, hydrogen bonding, and the larger surface area in flower-like aggregation, which was conducive to inhibiting π-π stacking and hydrogen bonding interaction of FITC, thus promoting the electron radiative transition. Also, cellulose-based fluorescent aggregation could be processed into fluorescent fiber, coating and printing pattern, and had potential applications in information storage, scene warning, and special fiber.

Tetraphenylethene-Based Covalent Organic Polymers with Aggregation-Induced Electrochemiluminescence for Highly Sensitive Bacterial Biosensors

Tetraphenylethene (TPE), which usually serves as aggregation-induced emission and aggregation-induced electrochemiluminescence fluorophores, has been widely applied in fabricating fluorescent nanomaterials and biosensors. However, it is still a tremendous challenge to prepare well-controlled TPE aggregates with strong fluorescence (FL) and electrochemiluminescence (ECL). In this study, we constructed a bacterial ECL biosensing platform with high sensitivity based on TPE-based covalent organic polymer (COP) nanoparticles synthesized by a simple Menschutkin reaction strategy to employ bromide group-carrying molecules and 1,1,2,2-tetrakis(4-(pyridine-4-yl)phenyl)ethene as the cross-linking agent and the emissive moiety, respectively. The ECL Escherichia coli biosensor had high sensitivity, a low limit of detection (0.19 CFU mL-1), a wide linear range (1 × 102-5 × 106 CFU mL-1), and good selectivity. The excellent properties of the bacterial biosensor could be attributed to the uniform spherical COP nanoparticles with enhanced FL and ECL signals, the maximal ECL efficiency of which was 8.4-fold higher than that of the typical tris(bipyridine) ruthenium(II) emitter. The FL and ECL intensities of the TPE-based COP nanoparticles could be adjusted by varying bromide group-carrying molecules and thus regulating their energy gap between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) orbitals. The TPE-based COP nanoparticles with strong FL and ECL intensities pave a promising avenue to construct highly sensitive bacterial ECL biosensors for the large-scale screening of disease-causing bacteria.

Mesoscale Acid-Base Complexes Display Size-Associated Photophysical Property and Photochemical Activity

The properties of single molecules and molecular aggregates can differ dramatically, leading to a long-standing interest in mesoscale aggregation processes. Herein, a series of acid-base molecular complexes is developed by using a tetraphenylethylene-backboned fluorophore, and investigated the photophysical properties and photochemical activities at different aggregation length scales. This fluorophore, with two basic diethylamine groups and two acidic tetrazole groups, exhibits sparse solubility due to multivalent interactions that cause infinite aggregation. The addition of a third acid leads to the formation of fluorophore/acid complexes with good dispersibility and colloidal stability. This assembly process can be controlled by the use of different acids and their stoichiometry, resulting in aggregates ranging in size from a few to hundreds of nanometers. A crystalline structure is obtained to illustrate the complex properties of the acid-base network. Unlike the single molecule, these complexes show a trend of size-related properties for photoluminescence efficiency and photochemical activity. As the amount of acid added increases, the size of the complexes decreases, the aggregation effect of the complexes on fluorescence emission increases, and the rates of the oxidative photocyclization and photodecomposition slow down. This work may help to understand size-controlled molecular materials at the mesoscale for functional design.

Controlling aggregation-induced emission by supramolecular interactions and colloidal stability in ionic emitters for light-emitting electrochemical cells

Chromophores face applicability limitations due to their natural tendency to aggregate, with a subsequent deactivation of their emission features. Hence, there has been a fast development of aggregation induced emission (AIE) emitters, in which non-radiative motional deactivation is inhibited. However, a fine control of their colloidal properties governing the emitting performance is fundamental for their application in thin film optoelectronics. In addition, ion-based lighting devices, such as light emitting electrochemical cells (LECs), requires the design of ionic AIE emitters, whose structure allows (i) an easy ion polarizability to assist charge injection and (ii) a reversible electrochemical behavior. To date, these fundamental questions have not been addressed. Herein, the hydrophilic/hydrophobic balance of a family of cationic tetraphenyl ethene (TPE) derivatives is finely tuned by chemical design. The hydrophilic yet repulsive effect of pyridinium-based cationic moieties is balanced with hydrophobic variables (long alkyl chains or counterion chemistry), leading to (i) a control between monomeric/aggregate state ruling photoluminescence, (ii) redox behavior, and (iii) enhanced ion conductivity in thin films. This resulted in a LEC enhancement with the first ionic AIE emitters, reaching values of 0.19 lm W-1 at ca. 50 cd m-2. Overall, this design rule will be key to advance ionic active species for optoelectronics.

Dynamic Motions of Ligands around the Metal Centers Afford a Fidget Spinner-Type AIE Luminogen

A new type of aggregation-induced emission (AIE) luminogen containing a dimeric metal fragment and two or three phthalazine ligands is described, which shows dynamic motions of ligands around the metal centers in solution. Based on the variable-temperature and EXSY NMR spectroscopy data, X-ray crystallography structures, and computational results, three different pathways (i.e., reversible exchange with haptotropic shifts, circulation of ligands around the dimeric metal fragment, and walking on the spot of ligands on the metal centers) were considered for this dynamic behavior. Restriction of these dynamic processes in the aggregate forms of the compounds (in H2O/CH3CN solvent mixtures) contributes to their AIE. DFT calculations and NMR analysis showed that bright excited states for these molecules are not localized on isolated molecules, and the emission of them stemmed from π-dimers or π-oligomers. The morphologies and the mode of associations in the solvent mixtures were determined by using transmission electron microscopy (TEM) and concentration-dependent NMR spectroscopy. The computational results showed the presence of a conical intersection (CI) between the S0 and S1 excited state, which provides an accessible pathway for nonradiative decay in these systems.

Bright photoactivatable probes based on triphenylethylene for Cu2+ detection in tap water and tea samples

Photoactivatable probes can switch fluorescence on from a weak or nonemission state to improve the sensitivity of the sensing system. In this work, we successfully constructed three highly emissive photoactivatable probes, 2-DP, 1-2-DP and 2-2-DP, for Cu2+ detection. Under UV irradiation, the photoluminescence quantum yields of 2-DP, 1-2-DP and 2-2-DP display approximately 52.4-, 11.5- and 49.2-fold enhancement, respectively. Cu2+ selectively quenches the bright photoactivated fluorescence, resulting in an approximately 38-fold fluorescence reduction. The highly selective fluorescence response to Cu2+ yields an excellent low detection limit of 5.8 nM. Moreover, the photoactivatable probes were successfully applied for Cu2+ determination in tap water and tea samples with recovery ranges of 95%-105% and 97%-106%, respectively. This work provides a more sensitive and efficient methodology for Cu2+ detection in heavy metal pollution and food safety.

Direct synthesis of spirobifluorenes by formal dehydrative coupling of biaryls and fluorenones

A Tf2O-mediated, direct dehydrative coupling of (hetero)biaryls and fluorenones proceeds to form the corresponding spirobifluorenes in good to high yields. The reaction system allows the relatively simple nonhalogenated and nonmetalated starting substrates to be directly adopted in the spirocyclisation reaction. In addition, the double cyclisation reaction is easily performed, giving the highly spiro-conjugated aromatic compounds of potent interest in materials chemistry. The preliminary optoelectronic properties of some newly synthesised compounds are also demonstrated.

Theoretical Study of the Photocyclization Reaction-Induced Dual Aggregation-Induced Emission Phenomenon

Photochromic molecules with aggregation-induced emission (AIE) effects are of great value and prospective in various practical applications. To explore its inherent mechanism, the open isomer ap-BBTE and the closed isomer c-BBTE were chosen to perform the theoretical calculation using the quantum mechanics/molecular mechanics model combined with thermal vibration correlation function formalism. The calculations show that the photocyclization (PC) reaction from ap-BBTE to c-BBTE facilitates an improvement in the AIE effect. It is found that the fluorescence quantum yield (ΦF) enhancement of ap-BBTE is attributed to the restriction of the low-frequency rotational motion of the benzothiophene moiety and the high-frequency stretching vibrations of the C-C bond between the benzothiophene and benzylbis(thiadiazole) vinyl groups after aggregation. For c-BBTE, the increase in ΦF upon aggregation is mainly due to the suppression of the high-frequency stretching vibration of the C-C bond between the benzothiophene and the benzobis(thiadiazole) vinyl groups. In addition, the AIE effect was also enhanced from ap-BBTE to c-BBTE, which is consistent with the experimental phenomenon. The corresponding emission spectrum red-shifted from ap-BBTE to c-BBTE in both dilute solution and the crystalline state due to the improved intramolecular conjugation of c-BBTE. Moreover, the PC reaction from ap-BBTE to c-BBTE easily occurs in an excited state with a low energy barrier transition state by forming a C-C bond between benzothiophene groups effectively in dilute solution. Our calculations provide theoretical guidance for the further rational design of efficient AIE luminogens.

Aggregation-Induced Near-Infrared Emission and Electrochemiluminescence of an Iridium(III) Complex for Ampicillin Sodium Sensing

A new iridium(III) complex was synthesized and characterized. Its photophysical properties and aggregation-induced emission and electrochemiluminescence in the near-infrared range were studied. The large conjugated cyclometallic ligand 1,2-phenylbenzoquinoline (pbq) was selected to form the Ir-C bond with the metal iridium(III) center and provide near-infrared emission of the complex. The auxiliary ligand 4,4'-diamino-2,2'-bipyridine (dabpy) can form hydrogen bonds, which was beneficial for the generation of aggregation-induced emission. The complex was aggregated into small spherical nanoparticles in 80% water and fascinating nanorings in 90% water. The sensing of ampicillin sodium (AMP) antibiotic by the iridium(III) complex were also investigated by photoluminescent and electrochemiluminescent methods. The complex showed a good selectivity toward AMP antibiotic compared to sodium phenylacetate and other eight antibiotics. The detection limits for AMP antibiotic was 0.76 μg/mL. This work provided a new strategy for the design of iridium(III) complex-based aggregation-induced emission and electrochemiluminescence probes for the sensing application.

The Role of Intermolecular Interaction on Aggregation-Induced Emission Phenomenon and OLED Performance

In this work, the role of intermolecular interaction on the aggregation-induced emission (AIE) phenomenon and organic light-emitting diodes' (OLEDs) performance was investigated. During the research, a group of compounds consisting of the (-CH=C(CN)(COOR)) moiety with identical energy parameters was designed using the DFT approach and successfully synthesized. The optical, electrochemical, and aggregation-induced emission properties were studied. The aggregation-induced emission of compounds has been studied in the mixture of MeCN (as a good solvent) and water (as a poor solvent) with different water fractions ranging from 0% to 99%. Moreover, the time dependence on the AIE feature was also evaluated. Thanks to their molecular structures, almost identical behavior of these substances in dilute solutions was observed. For molecules that exhibit the strong AIE phenomenon, emission efficiency increases rapidly during aggregation. What is also very interesting is it has been shown that by introducing an appropriate substituent, one can control the degree of intermolecular interactions and "control" the length of the emitted wave. Finally, OLEDs were fabricated by the spin-coating/evaporation hybrid method. Devices showed green-blueish electroluminescence (CIE coordinates: 0.107, 0.165) with maximum luminance reaching 25 cd m^-2 and EQE reaching 2%.

Preparation of 2,3-Dibromo-1H-indenes and Tetrabromodihydro-s-indacenes as Synthetic Building Blocks

The acid-induced intramolecular cyclization of 1,1-disubstituted 3-aryl-2,3-dibromoallylalcohols affords 2,3-dibromo-1H-indene derivatives. This method is also applicable to the preparation of tetrabromodihydro-s-indacenes. The thus obtained multi-brominated compounds can serve as versatile synthetic building blocks to obtain a variety of indene and indacene derivatives, as demonstrated by the synthesis of dialkylmethylene-bridged oligo(phenylenevinylene)s, which feature attractive photophysical properties.

Dicarboxylate Modulating Molecular-Ionic Platinum Compounds with Variable Stacking and Photoluminescence

Under solvothermal conditions, 10 molecular-ionic platinum compounds [Pt(NIA)₂]·(L)·nH₂O (L = dicarboxylate) were synthesized. In the reaction, acetonitrile undergoes trimerization in situ to generate N-(1-iminoethyl)acetamidine (NIA), which coordinates to Pt^II ions in forming the N-(1-iminoethyl)acetamidine platinum cation, while the organic carboxylates act as anions. Structural analysis shows that carboxylate ligands regulate the mode of packing of [Pt(NIA)₂] in those compounds. Photoluminescence studies show that the photoluminescence behaviors of those compounds also depended on the carboxylate ligands. 1-4, 6, and 7 show blue light emission with fluorescence emission wavelengths of 437-440 nm despite the different carboxylate ligands used. 5 and 8 show green emissions with maximum intensity peak positions of 522 nm. Compared with that of 5 and 8, the emission of 9 and 10 has the same red shifts with peak positions of 567 and 528 nm. The variable-temperature photoluminescence studies reveal that 8 and 10 show two different thermal quenching (TQ) zones in the range of 80-420 K, while the emission intensity of 9 shows negative thermal quenching at low temperatures of 80-220 K and TQ in the range of 220-420 K.

Suppression of reversible photocyclization reaction induced fluorescence enhancement: a theoretical study

The fluorescence intensity of SIP-2 and DPI under different environments are mainly related to the competition between the PC reaction and aggregation induced restriction of phenyl ring rotational motions.

Dynamic Covalent Chemistry Constrained Diphenylethenes: Control over Reactivity and Luminescence in both Solution and Solid State

Diarylethenes (DAEs) are an important class of building blocks in chemistry and materials science, and hence, their modulation and functionalization are of critical significance. Here we demonstrate a general strategy...

Palladium Catalyzed Regioselective Cyclization of Arylcarboxylic Acids via Radical Intermediates with Diaryliodonium Salts

Palladium-catalyzed C₂-arylation/intramolecular acylation with arylcarboxylic acids was developed by using diaryliodonium salts. The protocol has the advantage of good step-economy by two chemical bonds formation in one pot.

Stimuli-Responsive AIEgens

The unique advantages and the exciting application prospects of AIEgens have triggered booming developments in this area in recent years. Among them, stimuli-responsive AIEgens have received particular attention and impressive progress, and they have been demonstrated to show tremendous potential in many fields from physical chemistry to materials science and to biology and medicine. Here, the recent achievements of stimuli-responsive AIEgens in terms of seven most representative types of stimuli including force, light, polarity, temperature, electricity, ion, and pH, are summarized. Based on typical examples, it is illustrated how each type of systems realize the desired stimuli-responsive performance for various applications. The key work principles behind them are ultimately deciphered and figured out to offer new insights and guidelines for the design and engineering of the next-generation stimuli-responsive luminescent materials for more broad applications.

An Iridium Complex as an AIE-active Photosensitizer for Image-guided Photodynamic Therapy

Image-guided photodynamic therapy (PDT) has received growing attention due to its non-invasiveness and precise controllability. However, the PDT efficiency of most photosensitizers are decreased in living system due to the aggregation-caused singlet oxygen (¹ O₂ ) generation decreasing. Herein, we present an Iridium (III) pyridylpyrrole complex (Ir-1) featuring of aggregation-induced emission (AIE) and ¹ O₂ generation characteristics for image-guided PDT of cancer. Ir-1 aqueous solution exhibits bright red phosphorescence peaked at 630 nm, large Stokes shift of 227 nm, and good ¹ O₂ generation ability. The ¹ O₂ generating rate of Ir-1 in EtOH/water mixture solution is 2.3 times higher than that of Rose Bengal. In vitro experimental results revealed that Ir-1 has better biocompatibility and higher phototoxicity compared with clinically used photosensitizers (Rose Bengal and Ce6), suggesting that Ir-1 can serve as a photosensitizer for image-guided PDT of cancer.

A Feasible Strategy of Fabricating Type I Photosensitizer for Photodynamic Therapy in Cancer Cells and Pathogens

The utilization of photochemical reaction channel based on radical process is rarely reported, which might be a very efficient and feasible strategy for improving generation of Type I reactive oxygen species (ROS). In this work, a double ionic-type aggregation-induced emission luminogen (AIEgen) of TIdBO was developed as a photosensitizer, of which the potential photocyclization characteristic involving an electron-transfer process had a positive effect on Type I ROS generation in aggregates under continuous light irradiation. Its noticeable photodynamic therapy (PDT) performance and self-monitoring of PDT process by the relationship between cellular morphology change and fluorescence intensity enhancement were achieved. In addition, it showed a good killing ability to microbes and specific interactions with microbes but not cells by regulating the incubation time. These intriguing results reveal a feasible design principle for the implementation of efficient PS preparation in clinical treatment under hypoxic conditions.

A chemo- and regioselective Pd(0)-catalyzed three-component spiroannulation

A chemo- and regioselective Pd(0)-catalyzed spiroannulation has been successfully developed. The key feature of this method is the use of readily available 1,2-dihaloarenes, alkynes and 2-naphthols for the rapid assembly of spirocarbocyclic molecules. Mechanistic studies revealed that this domino reaction proceeded through a cascade of oxidative addition to Pd(0), alkyne migratory insertion, and 2-naphthol-facilitated dearomatizing [4+1] spiroannulation.

Self-assembling a natural small molecular inhibitor that shows aggregation-induced emission and potentiates antitumor efficacy

Targeted therapy using small molecular inhibitors has been developed to rewire key signaling pathways in tumor cells, but these inhibitors have had mixed success in the clinic due to their poor pharmaceutical properties and suboptimal intratumoral concentrations. Here, we developed a "self-assembling natural molecular inhibitor" strategy to test the efficacy and feasibility of the water-insoluble agent dasatinib (DAS), a tyrosine kinase inhibitor, for cancer therapy. By exploiting a facile reprecipitation protocol, the DAS inhibitor self-assembled into soluble supramolecular nanoparticles (termed sDNPs) in aqueous solution, without an exogenous excipient. This strategy is applicable for generating systemically injectable and colloid-stable therapeutic nanoparticles of hydrophobic small-molecule inhibitors. Concurrently, during this process, we observed aggregation-induced emission (AIE) of fluorescence for this self-assembled DAS, which makes sDNPs suitable for bioimaging and tracing of cellular trafficking. Notably, in an orthotopic model of breast cancer, administration of sDNPs induced a durable inhibition of primary tumors and reduced the metastatic tumor burden, significantly surpassing the effects of the free DAS inhibitor after oral delivery. In addition, low toxicity was observed for this platform, with effective avoidance of immunotoxicity. To the best of our knowledge, our studies provide the first successful demonstration of self-assembling natural molecular inhibitors with AIE and highlight the feasibility of this approach for the preparation of therapeutic nanoparticles for highly lethal human cancers and many other diseases.

Unusual light-driven amplification through unexpected regioselective photogeneration of five-membered azaheterocyclic AIEgen

Developing versatile synthetic methodologies with merits of simplicity, efficiency, and environment friendliness for five-membered heterocycles is of incredible importance to pharmaceutical and material science, as well as a huge challenge to synthetic chemistry. Herein, an unexpected regioselective photoreaction to construct a fused five-membered azaheterocycle with an aggregation-induced emission (AIE) characteristic is developed under mild conditions. The formation of the five-membered ring is both thermodynamically and kinetically favored, as justified by theoretical calculation and experimental evidence. Markedly, a light-driven amplification strategy is proposed and applied in selective mitochondria-targeted cancer cell recognition and fluorescent photopattern fabrication with improved resolution. The work not only delivers the first report on efficiently generating a fused five-membered azaheterocyclic AIE luminogen under mild conditions via photoreaction, but also offers deep insight into the essence of the photosynthesis of fused five-membered azaheterocyclic compounds.

Combined tetraphenylethylene fluorogens with positive charge for imaging capsule-covered pathogens

Capsule-covered pathogens can cause serious infectious diseases, and are highly pathogenic to humans. Herein, we developed four positively charged tetraphenylethylene derivatives (PC-TPEgens) that in certain combinations were applied to identify capsule-bearing pathogens using fluorescence imaging. The dual-charged probes were used to visualize the entire process of phagocytosis of pathogens into macrophages.

Catalytic Asymmetric trans-Selective Hydrosilylation of Bisalkynes to Access AIE and CPL-Active Silicon-Stereogenic Benzosiloles

Chirality widely exists in a diverse array of biologically active molecules and life forms, and the catalytic constructions of chiral molecules have triggered a heightened interest in the fields of chemistry and materials and pharmaceutical sciences. However, the synthesis of silicon-stereogenic organosilicon compounds is generally recognized as a much more difficult task than that of carbon-stereogenic centers because of no abundant organosilicon-based chiral sources in nature. Herein, we reported a highly enantioselective rhodium-catalyzed trans-selective hydrosilylation of silicon-tethered bisalkynes to access chiral benzosiloles bearing a silicon-stereogenic center. This protocol featured with chiral Ar-BINMOL-Phos bearing hydrogen-bond donors as a privileged P-ligand for catalytic asymmetric hydrosilylation that is operationally simple and has 100% atom-economy with good functional group tolerability as well as high enantioselectivity (up to >99:1 er). Benefiting from the trans-selective hydrosilylation with the aid of Rh/Ar-BINMOL-Phos-based asymmetric catalysis, the Si-stereogenic benzosiloles exhibited pronounced aggregation-induced emission (AIE) and circularly polarized luminescence (CPL) activity.

Metal ions-triggered photo-induced fluorescence change in rhodamine B-based photo-responsive complexes

Photo-responsive materials with tunable properties by multiple stimuli have been widely used as molecular machines, molecular logic gates, optical data storages, etc. In this work, we report a rhodamine B-based photo-responsive system, whose properties could be facilely modulated by metal ions (Zn(II), Ni(II) and Hg(II)). These metal ions endow the complexes (L-Zn, L-Ni and L-Hg) with similar photochromic property but distinctly different photo-induced fluorescence change. Upon UV light irradiation, the spirolactam ring in rhodamine B moiety turned from a close form to an open form, along with enlarged conjugated structure with intense absorbance. Interestingly, fluorescence "turn off", "no change" and "turn on" responses were induced by Zn(II), Ni(II) and Hg(II) respectively upon UV light irradiation. Taking advantage of the prominently different characteristics caused by metal ions, different logic gates were designed by simply varying the inputs of metal ions and UV light. This work provided a new strategy for developing multifunctional photo-responsive materials, which were further beneficial for constructing photo-controlled logic gates with tunable performance.

An AIEgen-based 2D ultrathin metal-organic layer as an electrochemiluminescence platform for ultrasensitive biosensing of carcinoembryonic antigen

In this work, a novel two-dimensional (2D) ultrathin metal-organic layer (MOL) based on the aggregation-induced emission (AIE) ligand H4ETTC (H4ETTC = 4',4''',4''''',4'''''''-(ethene-1,1,2,2-tetrayl)tetrakis(([1,1'-biphenyl]-4-carboxylic acid))) was developed and used to construct a novel electrochemiluminescence (ECL) aptasensor for ultrasensitive detection of carcinoembryonic antigen (CEA). The newly synthesized AIE luminogen (AIEgen)-based MOL (Hf-ETTC-MOL) yielded a higher ECL intensity and efficiency than did H4ETTC monomers, H4ETTC aggregates and 3D bulk Hf-ETTC-MOF. This improvement occurred not only because the ETTC ligands were coordinatively immobilized in a rigid MOL matrix, which restricted the intramolecular free rotation and vibration of these ligands and then reduced the non-radiative transition, but also because the porous ultrathin 2D MOL greatly shortened the transport distances of ions, electrons, coreactant (triethylamine, TEA) and coreactant intermediates (TEA˙ and TEA˙+), which made more ETTC luminophores able to be excited and yielded a high ECL efficiency. On the basis of using the Hf-ETTC-MOL as a novel ECL emitter and rolling circle amplification (RCA) as a signal amplification strategy, the constructed ECL aptasensor exhibited a linear range from 1 fg mL-1 to 1 ng mL-1 with a detection limit of 0.63 fg mL-1. This work has opened up new prospects for developing novel ECL materials and is expected to lead to increased interest in using AIEgen-based MOLs for ECL sensing.

Tetraphenylenthene-Based Conjugated Microporous Polymer for Aggregation-Induced Electrochemiluminescence

We demonstrate the aggregation-induced electrochemiluminescence (AIECL) generated by 1,1,2,2-tetrakis(4-bromophenyl)ethane (TBPE)-based conjugated microporous polymers (TBPE-CMPs) and its biosensing application. We synthesized three TBPE-CMPs (i.e., TBPE-CMP-1, -2, -3) using three different molecules including tris(4-ethynylphenyl)amine (TEPA), 4,4'-diethynylbiphenyl (DEP), and 2,4,6-tris(4-ethynylphenyl)-1,3,5-triazine (TEPT). The TBPE-CMPs can act as electrochemiluminescence (ECL) emitters to generate AIECL. Among them, TBPE-CMP-1 exhibits the highest ECL efficiency (1.72%) due to the improved electron-hole recombination efficiency and efficient suppression of nonradiative transition. Moreover, the ECL properties of TBPE-CMPs can be tuned by the introduction of different conjugated molecules that can decrease the energy gap to facilitate the injection of an electron into the conjugated polymer backbone. Importantly, TBPE-CMP-1 can be used to construct an ECL sensor for the detection of dopamine, whose electro-oxidation products (e.g., leucodopaminechrome (LDC), dopaminechrome (DC), 5,6-dihydroxyindole (DHI), and 5,6-indolequinone (IDQ)) may function as energy acceptors to quench the ECL emission of TBPE-CMP-1. This ECL sensor exhibits high sensitivity and good anti-interference capability against ascorbic acid and uric acid.

Color-tunable single-fluorophore supramolecular system with assembly-encoded emission

Regulating the fluorescent properties of organic small molecules in a controlled and dynamic manner has been a fundamental research goal. Although several strategies have been exploited, realizing multi-color molecular emission from a single fluorophore remains challenging. Herein, we demonstrate an emissive system by combining pyrene fluorophore and acylhydrazone units, which can generate multi-color switchable fluorescent emissions at different assembled states. Two kinds of supramolecular tools, amphiphilic self-assembly and γ-cyclodextrin mediated host-guest recognition, are used to manipulate the intermolecular aromatic stacking distances, resulting in the tunable fluorescent emission ranging from blue to yellow, including a pure white-light emission. Moreover, an external chemical signal, amylase, is introduced to control the assembly states of the system on a time scale, generating a distinct dynamic emission system. The dynamic properties of this multi-color fluorescent system can be also enabled in a hydrogel network, exhibiting a promising potential for intelligent fluorescent materials.

Regulating fluorescent properties of small molecules in a controlled manner has been a fundamental research goal but realizing multi-color emission from a single fluorophore remains challenging. Here the authros demonstrate that combined pyrene fluorophore and acylhydrazone units show multi-color switchable fluorescent at different assembled states.