Antifreezing Gold Colloids

Development of Macromolecular Cryoprotectants for Cryopreservation of Cells

Cryopreservation is a common way for long-term storage of therapeutical proteins, erythrocytes, and mammalian cells. For cryoprotection of these biosamples to keep their structural integrity and biological activities, it is essential to incorporate highly efficient cryoprotectants. Currently, permeable small molecular cryoprotectants such as glycerol and dimethyl sulfoxide dominate in cryostorage applications, but they are harmful to cells and human health. As acting in the extracellular space, membrane-impermeable macromolecular cryoprotectants, which exert remarkable membrane stabilization against cryo-injury and are easily removed post-thaw, are promising candidates with biocompatibility and feasibility. Water-soluble hydroxyl-containing polymers such as poly(vinyl alcohol) and polyol-based polymers are potent ice recrystallization inhibitors, while polyampholytes, polyzwitterions, and bio-inspired (glyco)polypeptides can significantly increase post-thaw recovery with reduced membrane damages. In this review, the synthetic macromolecular cryoprotectants are systematically summarized based on their synthesis routes, practical utilities, and cryoprotective mechanisms. It provides a valuable insight in development of highly efficient macromolecular cryoprotectants with valid ice recrystallization inhibition activity for highly efficient and safe cryopreservation of cells.

Low-Molecular-Weight PEGs for Cryopreservation of Stem Cell Spheroids

Stem cell spheroids (SCSs) are a valuable tool in stem cell research and regenerative medicine. SCSs provide a platform for stem cell behavior in a more biologically relevant context with enhanced cell-cell communications. In this study, we investigated the recovery of SCSs after cryopreservation at -196 °C for 7 days. Prior to cryopreservation, the SCSs were preincubated for 0 h (no preincubation), 2 h, 4 h, and 6 h at 37 °C in the presence of low-molecular-weight poly(ethylene glycol) (PEG) with molecular weights of 200, 400, and 600 Da. The recovery rate of SCSs was markedly affected by both the PEG molecular weight and the preincubation time. Specifically, when SCSs were preincubated with a PEG200 solution for 2 to 6 h, it significantly enhanced the recovery rate of the SCSs. Internalization of PEG200 through simple diffusion into the SCSs may be the cryoprotective mechanism. The PEG200 diffuses into the SCSs, which not only suppresses osmotic pressure development inside the cell but also inhibits ice formation. The recovered SCSs demonstrated both fusibility and capabilities for proliferation and differentiation comparable to SCSs recovered after dimethyl sulfoxide 10% cryopreservation. This study indicates that PEG200 serves as an effective cryoprotectant for SCSs. A simple preincubation procedure in the presence of the polymer greatly improves the recovery rate of SCSs from cryopreservation.

Hydrogel Nanoparticles Enable Nucleation Barrier Regulation and Ion Anchoring as an Alternative Pathway for Monosodium Urate Monohydrate Crystallization Control

Gout flare-up, commonly resulting from monosodium urate monohydrate (MSUM) crystallization, has led to painful inflammatory arthritis among hundreds of millions of people. Herein, a kind of hydrogel nanoparticles (HNPs) with specific properties was developed, aimed at providing a promising pathway for MSUM crystallization control. The experimental and molecular dynamics simulation results synchronously indicate that the fabricated HNPs achieve efficient inhibition of MSUM crystallization governed by the mechanism of "host-guest interaction" even under very low-dose administration. HNPs as the host dispersed in the hyperuricemic model effectively lift the relative heterogeneous nucleation barrier of the MSUM crystal and hinder solute aggregation with strong electronegativity and hydrophobicity. The initial appearance of MSUM crystals was then delayed from 94 to 334 h. HNPs as the guest on the surface of the formed crystal can decelerate the growth rate by anchoring ions and occupying the active sites on the surface, and the terminal yield of the MSUM crystal declined to less than 1% of the control group. The good biocompatibility of HNPs (cell viability > 94%) renders it possible for future clinical applications. This study can guide the rational design of inhibitory nanomaterials and the development of their application in the control of relevant pathological crystallization.

Observing growth and interfacial dynamics of nanocrystalline ice in thin amorphous ice films

Ice crystals at low temperatures exhibit structural polymorphs including hexagonal ice, cubic ice, or a hetero-crystalline mixture of the two phases. Despite the significant implications of structure-dependent roles of ice, mechanisms behind the growths of each polymorph have been difficult to access quantitatively. Using in-situ cryo-electron microscopy and computational ice-dynamics simulations, we directly observe crystalline ice growth in an amorphous ice film of nanoscale thickness, which exhibits three-dimensional ice nucleation and subsequent two-dimensional ice growth. We reveal that nanoscale ice crystals exhibit polymorph-dependent growth kinetics, while hetero-crystalline ice exhibits anisotropic growth, with accelerated growth occurring at the prismatic planes. Fast-growing facets are associated with low-density interfaces that possess higher surface energy, driving tetrahedral ordering of interfacial H2O molecules and accelerating ice growth. These findings, based on nanoscale observations, improve our understanding on early stages of ice formation and mechanistic roles of the ice interface.

Advances in single ice crystal shaping materials: From nature to synthesis and applications in cryopreservation

Antifreeze (glyco) proteins [AF(G)Ps], which are widely present in various extreme microorganisms, can control the formation and growth of ice crystals. Given the significance of cryogenic technology in biomedicine, climate science, electronic energy, and other fields of research, scientists are quite interested in the development and synthesis high-efficiency bionic antifreeze protein materials, particularly to reproduce their dynamic ice shaping (DIS) characteristics. Single ice crystal shaping materials, a promising class of ice-controlling materials, can alter the morphology and growth rate of ice crystals at low temperatures. This review aims to highlight the development of single ice crystal shaping materials and provide a brief comparison between a series of natural and bionic synthetic materials with DIS ability, which include AF(G)Ps, polymers, salts, and nanomaterials. Additionally, we summarize their applications in cryopreservation. Finally, this paper presents the current challenges and prospects encountered in developing high-efficiency and practical single ice crystal shaping materials. STATEMENT OF SIGNIFICANCE: The formation and growth of ice crystals hold a significant importance to an incredibly broad range of fields. Therefore, the design and fabrication of the single ice crystal shaping materials have gained the increasing popularity due to its key role in dynamic ice shaping (DIS) characteristics. Especially, single ice crystal shaping materials are considered one of the most promising candidates as ice inhibitors, presenting tremendous prospects for enhancing cryopreservation. In this work, we focus on the molecular characteristics, structure-function relationships, and DIS mechanisms of typical natural and biomimetic synthetic materials. This review may provide inspiration for the design and preparation of single ice crystal shaping materials and give guidance for the development of effective cryopreservation agent.

Quantified instant conjugation of peptides on a nanogold surface for tunable ice recrystallization inhibition

The adverse effects of recrystallization limit the application of cryopreservation in many fields. Peptide-based materials play an essential role in the antifreezing area because of their excellent biocompatibility and abundant ice-binding sites. Peptide-gold nanoparticle conjugates can effectively reduce time and material costs through metal-thiol interactions, but controlled modification remains an outstanding issue, which makes it difficult to elucidate the antifreezing effects of antifreeze peptides at different densities and lengths. In this study, we developed an instant peptide capping on gold nanoparticles with butanol-assisted dehydration and provided a controllable quantitative coupling within a certain range. This chemical dehydration makes it possible to fabricate peptide-gold nanoparticle conjugates in large batches at minute levels. Based on this, the influence of the peptide density and sequence length on the antifreezing behaviors of the conjugates was investigated. The results evidenced that the antifreezing property of the flexible peptide conjugated on a rigid core is related to both the density and length of the peptide. In a certain range, the density is proportional to the antifreeze, while the length is negatively correlated with it. We proposed a rapidly controllable method for synthesizing peptide-gold nanoparticle conjugates, which may provide a universal approach for the development of subsequent recrystallization-inhibiting materials.

Self-Assembled Nanostructures of Homo-Oligopeptide as a Potent Ice Growth Inhibitor

This study reports the formation of self-assembled nanostructures with homo-oligopeptides consisting of amino acids (i.e., alanine, threonine, valine, and tyrosine), the resulting morphologies (i.e., spherical shape, layered structure, and wire structure) in aqueous solution, and their potential as ice growth inhibitors. Among the homo-oligopeptides investigated, an alanine homo-oligopeptide (n = 5) with a spherical nanostructure showed the highest ice recrystallization inhibition (IRI) activity without showing a burst ice growth property and with low ice nucleation activity. The presence of nanoscale self-assembled structures in the solution showed superior IRI activity compared to an amino acid monomer because of the higher binding affinity of structures on the growing ice crystal plane. Simulation results revealed that the presence of nanostructures induced a significant inhibition of ice growth and increased lifetime of hydrogen bonding compared with unassembled homo-oligopeptide. These results envision extraordinary performance for self-assembled nanostructures as a desirable and potent ice growth inhibitor.

The Application of Nanoparticle-Based Imaging and Phototherapy for Female Reproductive Organs Diseases

Various female reproductive disorders affect millions of women worldwide and bring many troubles to women's daily life. Let alone, gynecological cancer (such as ovarian cancer and cervical cancer) is a severe threat to most women's lives. Endometriosis, pelvic inflammatory disease, and other chronic diseases-induced pain have significantly harmed women's physical and mental health. Despite recent advances in the female reproductive field, the existing challenges are still enormous such as personalization of disease, difficulty in diagnosing early cancers, antibiotic resistance in infectious diseases, etc. To confront such challenges, nanoparticle-based imaging tools and phototherapies that offer minimally invasive detection and treatment of reproductive tract-associated pathologies are indispensable and innovative. Of late, several clinical trials have also been conducted using nanoparticles for the early detection of female reproductive tract infections and cancers, targeted drug delivery, and cellular therapeutics. However, these nanoparticle trials are still nascent due to the body's delicate and complex female reproductive system. The present review comprehensively focuses on emerging nanoparticle-based imaging and phototherapies applications, which hold enormous promise for improved early diagnosis and effective treatments of various female reproductive organ diseases.

Emerging plasmonic nanoparticles and their assemblies for cancer radiotherapy

Plasmonic nanoparticles and their assemblies have been widely used in biosensing, optical imaging, and biomedicine over the past few decades. Especially in the field of radiotherapy, the physicochemical properties of high-Z plasmonic nanomaterials endow them with the ability to sensitize radiotherapy. Compared with single particles, the assembled structure with tunable properties leads to versatile applications in drug delivery and cancer treatment. In this review, we focus on plasmonic nanoparticles and their assemblies for cancer radiotherapy. First, the sensitization mechanism of plasmonic radiosensitizers is briefly introduced. Subsequently, the recent progress in cancer radiotherapy is systematically discussed according to the structure and shape classification. Finally, the current challenges and future perspectives in this field are also discussed in detail.

Ultralow-Loss Substrate for Nanophotonic Dark-Field Microscopy

For the colloidal nanophotonic structures, a transmission electron microscope (TEM) grid has been widely used as a substrate of dark-field microscopy because a nanometer-scale feature can be effectively determined by TEM imaging following dark-field microscopic studies. However, an optically lossy carbon layer has been implemented in conventional TEM grids. A broadband scattering from the edges of the TEM grid further restricted an accessible signal-to-noise ratio. Herein, we demonstrate that the freely suspended, ultrathin, and wide-scale transparent nanomembrane can address such challenges. We developed a 1 mm by 600 μm scale and 20 nm thick poly(vinyl formal) nanomembrane, whose area is around 180 times wider than a conventional TEM grid, so that the possible broadband scattering at the edges of the grid was effectively excluded. Also, such nanomembranes can be formed without the assistance of carbon support; allowing us to achieve the highest signal-to-background ratio of scattering among other substrates.

Ice recrystallization inhibition mechanism of zwitterionic poly(carboxybetaine methacrylate)

Understanding the ice recrystallization inhibition (IRI) mechanism is of fundamental importance for the rational design of novel antifreeze protein mimetics and reducing IR-related damage. In this communication, using quantitive experimental methods and molecular dynamics simulations we demonstrate that zwitterionic poly(carboxybetaine methacrylate) (PCBMA) can serve as a novel IRI-active substance. This work unravels the atomic-level details of the IRI mechanism of zwitterionic antifreeze protein mimetics and provides insight into the development of next-generation antifreeze protein mimetics.

Non-Invasive, Reliable, and Fast Quantification of DNA Loading on Gold Nanoparticles by a One-Step Optical Measurement

An exquisite, versatile, and reproducible quantification of DNA loading on gold nanoparticles (Au NPs) has long been pursued because this loading influences the analytical, therapeutic, and self-assembly behaviors of DNA-Au NPs. Nevertheless, the existing methods used thus far rely solely on the invasive detachment and subsequent spectroscopic quantification of DNA, which are error-prone and highly dependent on trained personnel. Here, we present a non-invasive optical framework that can determine the number of DNA strands on Au NPs by versatile one-step measurement of the visible absorption spectra of DNA-Au NP solutions without any invasive modifications or downstream processes. Using effective medium theory in conjunction with electromagnetic numerical calculation, the change in DNA loading density, resulting from varying the ion concentration, Au NP size, DNA strand length, and surrounding temperature, can be tracked in situ merely by the one-step measurement of visible absorption spectra, which is otherwise impossible to achieve. Moreover, the simplicity and robustness of this method promote reproducible DNA loading quantification regardless of experimental adeptness, which is in stark contrast with existing invasive and multistep methods. Overall, the optical framework outlined in this work can contribute to democratizing research on DNA-Au NPs and facilitating their rapid adoption in transformative applications.

A Dynamic Membrane-Active Glycopeptide for Enhanced Protection of Human Red Blood Cells against Freeze-Stress

Intracellular delivery of freezing-tolerant trehalose is crucial for cryopreservation of red blood cells (RBCs) and previous strategies based on membrane-disruptive activity usually generate severe hemolysis. Herein, a dynamic membrane-active glycopeptide is developed by grafting with 25% maltotriose and 50% p-benzyl alcohol for the first time to effectively facilitate entry of membrane-impermeable trehalose in human RBCs with low hemolysis. Results of the mechanism acting on cell membranes suggest that reversible adsorption of such benzyl alcohol-grafted glycopeptide on cell surfaces upon weak perturbation with phospholipids and dynamic transition toward membrane stabilization are essential for keeping cellular biofunctions. Furthermore, the functionalized glycopeptide is indicative of typical α-helical/β-sheet structure-driven regulations of ice crystals during freeze-thaw, thereby strongly promoting efficient cryopreservation. Such all-in-one glycopeptide enables achieving both high cell recovery post-thaw >85% and exceptional cryosurvival >95% in direct freezing protocols. The rationally designed benzyl alcohol-modified glycopeptide permits the development of a competent platform with high generality for protection of blood cells against freeze-stress.

Polysaccharide-Derived Ice Recrystallization Inhibitors with a Modular Design: The Case of Dextran-Based Graft Polymers

Ice recrystallization inhibitors inspired from antifreeze proteins (AFPs) are receiving increasing interest for cryobiology and other extreme environment applications. Here, we present a modular strategy to develop polysaccharide-derived biomimetics, and detailed studies were performed in the case of dextran. Poly(vinyl alcohol) (PVA) which has been termed as one of the most potent biomimetics of AFPs was grafted onto dextran via thiol-ene click chemistry (Dex-g-PVA). This demonstrated that Dex-g-PVA is effective in IRI and its activity increases with the degree of polymerization (DP) (sizes of ice crystals were 18.846 ± 1.759 and 9.700 ± 1.920 μm with DPs of 30 and 80, respectively) and fraction of PVA. By means of the dynamic ice shaping (DIS) assay, Dex-g-PVA is found to engage on the ice crystal surfaces, thus the ice affinity accounts for their IRI activity. In addition, Dex- g-PVA displayed enhanced IRI activity compared to that of equivalent PVA alone. We speculate that the hydrophilic nature of dextran would derive PVA in a stretch conformation that favors ice binding. The modular design can not only offer polysaccharides IRI activity but also favor the ice-binding behavior of PVA.

Janus regulation of ice growth by hyperbranched polyglycerols generating dynamic hydrogen bonding

In this study, a new phenomenon describing the Janus effect on ice growth by hyperbranched polyglycerols, which can align the surrounding water molecules, has been identified. Even with an identical polyglycerol, we not only induced to inhibit ice growth and recrystallization, but also to promote the growth rate of ice that is more than twice that of pure water. By investigating the polymer architecture and population, we found that the stark difference in the generation of quasi-structured H₂O molecules at the ice/water interface played a crucial role in the outcome of these opposite effects. Inhibition activity was induced when polymers at nearly fixed loci formed steady hydrogen bonding with the ice surface. However, the formation-and-dissociation dynamics of the interfacial hydrogen bonds, originating from and maintained by migrating polymers, resulted in an enhanced quasi-liquid layer that facilitated ice growth. Such ice growth activity is a unique property unseen in natural antifreeze proteins or their mimetic materials.

Peptide-DNA origami as a cryoprotectant for cell preservation

Cryopreservation of cells is essential for the conservation and cold chain of bioproducts and cell-based medicines. Here, we demonstrate that self-assembled DNA origami nanostructures have a substantial ability to protect cells undergoing freeze-thaw cycles; thereby, they can be used as cryoprotectant agents, because their nanoscale morphology and ice-philicity are tailored. In particular, a single-layered DNA origami nanopatch functionalized with antifreezing threonine peptides enabled the viability of HSC-3 cells to reach 56% after 1 month of cryopreservation, surpassing dimethyl sulfoxide, which produced 38% viability. It also exhibited minimal dependence on the cryopreservation period and freezing conditions. We attribute this outcome to the fact that the peptide-functionalized DNA nanopatches exert multisite actions for the retardation of ice growth in both intra- and extracellular regions and the protection of cell membranes during cryopreservation. This discovery is expected to deepen our fundamental understanding of cell survival under freezing environment and affect current cryopreservation technologies.

Antifreezing Hydroxyl Monolayer of Small Molecules on a Nanogold Surface

The rational design of ice recrystallization inhibition (IRI) materials is challenging due to the poor understanding of the IRI mechanism at the molecular level. Here we report several new findings about IRI. (1) A dense hydroxyl monolayer of small molecules, e.g. 6-aza-2-thiothymine (ATT), adsorbed on a nanogold surface was demonstrated, for the first time, to have IRI activity. Five structural analogues adsorbed on groups nanogold with outward hydroxyl or methyl were created to evidence the origin of IRI activity. (2) Their IRI mechanism is closely related to the density of hydroxyls on a nanogold surface. However, the hydrophobic interaction in our model is not essential for macroscopic IRI activity. (3) A molecular dynamics simulation elucidates the hydroxyl density dependent IRI trajectories underlying the experimental observations, and the radial distribution function reveals that the methyl even slightly hinders the formation of hydrogen bonding due to a hydrophobic interaction. This work sheds more light on the IRI mechanism that should help in the customization of novel IRI materials.

Gold Nanoprobes Exploring the Ice Structure in the Aqueous Dispersion of Poly(Ethylene Glycol)-Gold Hybrid Nanoparticles

Ice structures and their formation process are fundamentally important to cryobiology, geoscience, and physical chemistry. In this work, we synthesized gold nanoprobes by grafting water-soluble polyethylene glycol (PEG) onto spherical gold nanoparticles and analyzed the structure of ice formation in the vicinity of the resulting hybrid PEG-Au nanoparticles (AuPEGNPs). Temperature-dependent in situ small-angle X-ray scattering (SAXS) indicated that AuPEGNPs, like PEG, caused the formation of bulk spherulite ice. Unlike for PEG, we observed the formation of lamellar ice with a periodicty of 4.6 nm, which is thermodynamically less stable than the bulk form. The lamellar ice formed after AuPEGNP agglomeration during cooling at -19 °C, and it remained during subsequent heating from -20 to -11 °C and melted at around -10 °C, far below the melting temperature of bulk ice. We explain different effects of AuPEGNP and free PEG on ice formation by the topological differences. The highly concentrated PEG chains on the agglomerated Au cores lead to the formation of PEG-hydrates that assemble into lamellar ice with a periodicity of 4.6 nm.

Antifreeze proteins and their biomimetics for cell cryopreservation: Mechanism, function and application-A review

Cell-based therapy is a promising technology for intractable diseases and health care applications, in which cryopreservation has become an essential procedure to realize the production of therapeutic cells. Ice recrystallization is the major factor that affects the post-thaw viability of cells. As a typical series of biomacromolecules with ice recrystallization inhibition (IRI) activity, antifreeze proteins (AFPs) have been employed in cell cryopreservation. Meanwhile, synthesized materials with IRI activity have emerged in the name of biomimetics of AFPs to expand their availability and practicality. However, fabrication of AFPs mimetics is in a chaotic period. There remains little commonality among different AFPs mimetics, then it is difficult to set guidelines on their design. With no doubt, a comprehensive understanding on the antifreezing mechanism of AFPs in molecular level will enable us to rebuild the function of AFPs, and provide convenience to clarify the relationship between structure and function of these early stage biomimetics. In this review, we would discuss those previously reported biomimetics to summarize their structure characteristics concerning the IRI activity and attempt to develop a roadmap for guiding the design of novel AFPs mimetics.

Beetle and mussel-inspired chimeric protein for fabricating anti-icing coating

Ice accretion on surfaces can cause serious damages and economic losses in industries and civilian facilities. Antifreeze proteins (AFPs) as evolutionary adaptation products of organisms to cold climates, provide solutions for alleviating icing problems. In this work, a chimeric protein Mfp-AFP was rationally designed combining mussel-inspired adhesive domain with Tenebrio molitor-derived antifreeze protein domain. Expectedly, the multifunctional Mfp-AFP can lower the freezing point of water and inhibit ice recrystallization. The chimeric protein could also readily modify diverse solid surfaces due to the adhesive domain containing Dopa, and resist frosting and delay ice formation due to the beetle-derived antifreeze fragment. Moreover, Mfp-AFP coatings display excellent biocompatibility proved by cytocompatibility and hemolysis assays. Here, the designed multifunctional protein coatings provide an alternative strategy for fabricating anti-icing surfaces.

Poly(l-Ala-co-l-Lys) Exhibits Excellent Ice Recrystallization Inhibition Activity

The control of ice recrystallization is very important in cryo-technological fields such as the food industry, biopharmaceuticals, and cell storage. Ice recrystallization inhibition (IRI) compounds are therefore designed to limit the growth of ice crystals, decrease the crystal size, and control the crystal shape. To improve the IRI activity of cryo-systems, various synthetic polymers such as biomimetic polypeptides from polar fish, facially amphiphilic polymers, polyampholytes, poly(vinyl alcohol) derivatives, and block copolymers with hydrophilic-hydrophobic balance have been developed. Except for graphene oxide, poly(vinyl alcohol) has thus far exhibited the best performance among these polymers. Herein, poly(l-alanine-co-l-lysine) (PAK) was shown to exhibit a similar IRI activity to that of poly(vinyl alcohol). Moreover, in contrast to the needle-shaped ice crystals generated by the aqueous PVA solution, the PAK solution was shown to generate cubic-to-spherical shaped ice crystals. Furthermore, neither poly(l-alanine-co-l-aspartic acid) (PAD) nor poly(ethylene glycol) (PEG) with a similar molecular weight provided any significant IRI activity. Examination by FTIR and circular dichroism spectroscopies indicated that the PAK forms α-helices, whereas the PAD forms random coils in water. Further, a dynamic ice shaping study suggested that PAK strongly interacts with ice crystals, whereas PAD and PEG only weakly interact. These results suggest that PAK is an important compound with superior IRI activity and that this activity is dependent upon the functional groups and secondary structure of the polypeptides.

Size and Shape Control of Ice Crystals by Amphiphilic Block Copolymers and Their Implication in the Cryoprotection of Mesenchymal Stem Cells

Precise control over the size and shape of ice crystals is a key factor to consider in designing antifreezing and cryoprotecting molecules for cryopreservation of cells. Here, we report that a poly(ethylene glycol)-poly(l-alanine) (PEG-PA) block copolymer exhibits excellent cryoprotecting properties for stem cells and antifreezing properties for water. As the molecular weight of PA increased from 500, 760, and 1750 Da (P1, P2, and P3) at the same PEG molecular weight of 5000 Da, the β-sheet content decreased and α-helix content increased. Comparing P2 (PEG-PA; 5000-760) and P4 (PEG-PA: 1000-750), β-sheets increased as the PEG block length decreased. The critical micelle concentration of the PEG-PA block copolymers was in a range of 0.5-3.0 mg/mL and was proportional to the hydrophobicity of the PEG-PA block copolymers. The P1, P2, and P3 self-assembled into spherical micelles, whereas P4 formed micelles with cylindrical morphology. The difference in the block copolymer structure affected ice recrystallization inhibition (IRI) activity and cryopreservation of cells. IRI activity was assayed via mean largest grain size (MLGS), and interactions between polymers and ice crystal surfaces were studied by dynamic ice-shaping studies. The MLGS decreased to 58 → 53 → 45 → 35 → 23% of that of PBS, as the polymer (PEG-PA 5000-500) concentration increased from 0.0 (PBS; control) → 1.0 → 5.0 → 10 → 30 → 50 mg/mL. The MLGS of PEG 5k solutions (negative control) decreased to 74 → 71 → 64 → 44 → 37% of that of PBS in the same concentration range. P3 and P4 with a longer hydrophobic PA block developed elongated ice crystals at above 30 mg/mL. The dynamic ice-shaping study exhibited that ice crystals became needle-shaped, as the hydrophobicity of the polymer increased as in P2-P4. The cell recovery in the P1 system after cryopreservation at -196 °C for 7 days was 87% of that of the dimethyl sulfoxide (DMSO) 10% system (positive control). The cell recovery was 48% for the P2 system and drastically decreased to less than 30% of that of the DMSO 10% system in the P3, P4, PEG 5k, PEG 1k, PVA 80H, and PVA 100H systems. Current studies suggest that IRI activity, round ice crystal shaping, and membrane stabilization activity of P1 cooperatively provide excellent cell recovery among the candidate systems. Recovered stem cells exhibited excellent proliferation and multilineage differentiation into osteocytes, chondrocytes, and adipocytes. To conclude, the PEG-PA (5000-500) block copolymer is suggested to be a promising antifreezing cryoprotectant for stem cells.

Advanced Nanomaterials-Assisted Cell Cryopreservation: A Mini Review

Cell cryopreservation is of vital significance both for transporting and storing cells before experimental/clinical use. Cryoprotectants (CPAs) are necessary additives in the preserving medium in cryopreservation, preventing cells from freeze-thaw injuries. Traditional organic solvents have been widely used in cell cryopreservation for decades. Given the obvious damage to cells due to their undesirable cytotoxicity and the burdensome post-thaw washing cycles before use, traditional CPAs are more and more likely to be replaced by modern ones with lower toxicity, less processing, and higher efficiency. As materials science thrives, nanomaterials are emerging to serve as potent vehicles for delivering nontoxic CPAs or inherent CPAs comparable to or even superior to conventional ones. This review will introduce some advanced nanomaterials (e.g., organic/inorganic nanoCPAs, nanodelivery systems) utilized for cell cryopreservation, providing broader insights into this developing field.

Topology Reliable LCST-Type Behavior of ABA Triblock Polymer and Influence on Water Condensation and Crystallization

As a kind of smart material, thermoresponsive hydrogels are widely investigated and applied in many fields. Due to the limitation of the freezing temperature of the water, it is a challenge to further broaden their sol-gel transition temperature (T_gel ) range, especially below 0 °C. Herein, the lower critical solution temperature type of amphiphilic ABA triblock copolymers, synthesized via two-step reversible addition-fragmentation chain transfer (RAFT) polymerization is demonstrated. The hydrophilic A-block and the hydrophobic B-block are composed of poly(N,N-dimethylacrylamide) (PDMAA) and poly(diacetone acrylamide) (PDAAM), respectively. The degree of polymerization (DP) of both A-block and B-block shows a significant influence on the T_gel of triblock copolymer dispersion. By changing the length of these two blocks or physically blending these copolymers dispersions, the T_gel can be well adjusted in a temperature range from 45 to -10 °C. Moreover, When the T_gel is higher than 4 °C, the triblock copolymer coatings show a good anti-fogging property. And when the T_gel is around or lower than the freezing temperature of the water, aqueous dispersions of the triblock copolymer have an ice recrystallization inhibition activity, resulting in the decrease of average maximum grain size (MLGS) of ice crystal.

Antifreeze proteins and homogeneous nucleation: On the physical determinants impeding ice crystal growth

Antifreeze proteins (AFPs) are biopolymers capable of interfering with ice growth. Their antifreeze action is commonly understood considering that the AFPs, by pinning the ice surface, force the crystal-liquid interface to bend forming an ice meniscus, causing an increase in the surface free energy and resulting in a decrease in the freezing point ΔT^max. Here, we present an extensive computational study for a model protein adsorbed on a TIP4P/Ice crystal, computing ΔT^max as a function of the average distance d between AFPs, with simulations spanning over 1 µs. First, we show that the lower the d, the larger the ΔT^max. Then, we find that the water-ice-protein contact angle along the line ΔT^max(d) is always larger than 0°, and we provide a theoretical interpretation. We compute the curvature radius of the stable solid-liquid interface at a given supercooling ΔT ≤ ΔT^max, connecting it with the critical ice nucleus at ΔT. Finally, we discuss the antifreeze capability of AFPs in terms of the protein-water and protein-ice interactions. Our findings establish a unified description of the AFPs in the contest of homogeneous ice nucleation, elucidating key aspects of the antifreeze mechanisms and paving the way for the design of novel ice-controlling materials.

Multifunctional Gold Nanoparticles: A Novel Nanomaterial for Various Medical Applications and Biological Activities

Nanotechnology has become a trending area in science and has made great advances with the development of functional, engineered nanoparticles. Various metal nanoparticles have been widely exploited for a wide range of medical applications. Among them, gold nanoparticles (AuNPs) are widely reported to guide an impressive resurgence and are highly remarkable. AuNPs, with their multiple, unique functional properties, and easy of synthesis, have attracted extensive attention. Their intrinsic features (optics, electronics, and physicochemical characteristics) can be altered by changing the characterization of the nanoparticles, such as shape, size and aspect ratio. They can be applied to a wide range of medical applications, including drug and gene delivery, photothermal therapy (PTT), photodynamic therapy (PDT) and radiation therapy (RT), diagnosis, X-ray imaging, computed tomography (CT) and other biological activities. However, to the best of our knowledge, there is no comprehensive review that summarized the applications of AuNPs in the medical field. Therefore, in this article we systematically review the methods of synthesis, the modification and characterization techniques of AuNPs, medical applications, and some biological activities of AuNPs, to provide a reference for future studies.

Soft Plasmonic Assemblies Exhibiting Unnaturally High Refractive Index

The increases in refractive indices (n) of materials are crucial for transformative optical technologies. With the progress of monolithic lithography, large advances have been achieved with several semiconductors, including silicon, germanium, and gallium arsenide, which generally provide higher n of ∼4.0 compared to those of other elements. Nevertheless, above this upper limit of naturally available n, the range of light-matter interactions could be unprecedentedly expanded, which in turn enriches the possible applications. Here, we present a soft self-assembly of polyhedral Au colloids as a promising method to achieve unnaturally high n values. The interfacial assembly of Au nanocubes provides n of 6.4 at the resonant wavelength (near-infrared) and 4.5 in the off-resonant regimes (mid-infrared), which have not been previously reached. The soft self-assembly of polyhedral Au colloids can be a versatile and highly effective route for the fabrication of optical metamaterials with unnaturally high n values.

Modelling of short synthetic antifreeze peptides: Insights into ice-pinning mechanism

Organisms living in icy environments produce antifreeze proteins to control ice growth and recrystallization. It has been proposed that these molecules pin the surface of ice crystals, thus inducing the formation of a curved surface that arrests crystal growth. Such proteins are very appealing for many potential applications in food industry, material science and cryoconservation of organs and tissues. Unfortunately, their structural complexity has seriously hampered their practical use, while efficient and accessible synthetic analogues are highly desirable. In this paper, we used molecular dynamics based techniques to model the interaction of three short antifreeze synthetic peptides with an ice surface. The employed protocols succeeded in reproducing the ice pinning action of antifreeze peptides and the consequent ice growth arrest, as well as in distinguishing between antifreeze and control peptides, for which no such effect was observed. Principal components analysis of peptides trajectories in different simulation settings permitted to highlight the main structural features associated to antifreeze activity. Modeling results are highly correlated with experimentally measured properties, and insights on ice-peptide interactions and on conformational patterns favoring antifreeze activity will prompt the design of new and improved antifreeze peptides.

DNA Base Pair Stacking Crystallization of Gold Colloids

We describe a DNA base pair (bp) stacking driven 3D crystallization of 70-80 nm gold nanospheres (Au NSs) into a large-area, face-centered-cubic (FCC) lattice. Although great advances have been achieved over the past decade, DNA nanoparticle (NP) crystallization has relied solely on the base complementary binding. This limits the accessible crystal size particularly for the larger and heavier Au NPs (>50 nm). In this work, we argue that the use of DNA bp-stacking (so-called blunt-end stacking) instead of complementary binding can widen the scope of controlled interparticle interactions used to assemble larger Au colloids into a larger-area crystal. Through the optimization of the melting transition, relatively large Au NSs (e.g., 75 nm) with nearly ideal roundness can be crystallized into FCC crystals with the area of up to approximately 1400 μm². A strong metallodielectric stopband is experimentally observed in the visible range, confirming the high quality of our self-assembled Au colloidal crystals.

Affinity-Enhanced CTC-Capturing Hydrogel Microparticles Fabricated by Degassed Mold Lithography

Technologies for the detection and isolation of circulating tumor cells (CTCs) are essential in liquid biopsy, a minimally invasive technique for early diagnosis and medical intervention in cancer patients. A promising method for CTC capture, using an affinity-based approach, is the use of functionalized hydrogel microparticles (MP), which have the advantages of water-like reactivity, biologically compatible materials, and synergy with various analysis platforms. In this paper, we demonstrate the feasibility of CTC capture by hydrogel particles synthesized using a novel method called degassed mold lithography (DML). This technique increases the porosity and functionality of the MPs for effective conjugation with antibodies. Qualitative fluorescence analysis demonstrates that DML produces superior uniformity, integrity, and functionality of the MPs, as compared to conventional stop flow lithography (SFL). Analysis of the fluorescence intensity from porosity-controlled MPs by each reaction step of antibody conjugation elucidates that more antibodies are loaded when the particles are more porous. The feasibility of selective cell capture is demonstrated using breast cancer cell lines. In conclusion, using DML for the synthesis of porous MPs offers a powerful method for improving the cell affinity of the antibody-conjugated MPs.