Catalytic Enantioselective Synthesis of Cyclobutenes from Alkynes and Alkenyl Derivatives

Unveiling the Use of 1,1-Bis(triflyl)ethylene as CF3SO2CH═CH2 Source with the Assistance of (n-Bu)4NF: Synthesis of 3-[(Trifluoromethyl)sulfonyl]cyclobut-1-enes

Allylic sulfone-embedded cyclobutenes have been prepared in one pot from alkynes. The carbocycle and the alkenyl sulfone moieties were installed through consecutive bis(triflyl)cyclobutenylation of a triple bond and tetra-n-butylammonium fluoride (TBAF)-assisted hydrodesulfonylation of an allylic bis(sulfone). It is noteworthy that 1,1-bis(triflyl)ethylene acts as a CF3SO2CH═CH2 source for the first time.

Synthesis of benzooxepane-fused cyclobutene derivatives via Pd-catalyzed cascade reactions of haloarenes and diynylic ethers

A tandem palladium-catalyzed Sonogashira coupling, propargyl-allenyl isomerization, and [2+2] cycloaddition sequence between electron-deficient haloarenes and 1,8-diynylic ethers is developed. The reaction shows good functional tolerance and proceeds under mild conditions to provide a new profile of benzooxepane-fused cyclobutene derivatives in moderate to high yields with high selectivity. The reaction mechanism is validated both by experimental studies and DFT calculations.

Pathway-divergent coupling of 1,3-enynes with acrylates through cascade cobalt catalysis

Catalytic cascade transformations of simple starting materials into highly functionalized molecules bearing a stereochemically defined multisubstituted alkene, which are important in medicinal chemistry, natural product synthesis, and material science, are in high demand for organic synthesis. The development of multiple reaction pathways accurately controlled by catalysts derived from different ligands is a critical goal in the field of catalysis. Here we report a cobalt-catalyzed strategy for the direct coupling of inexpensive 1,3-enynes with two molecules of acrylates to construct a high diversity of functionalized 1,3-dienes containing a trisubstituted or tetrasubstituted olefin. Such cascade reactions can proceed through three different pathways initiated by oxidative cyclization to achieve multiple bond formation in high chemo-, regio- and stereoselectivity precisely controlled by ligands, providing a platform for the development of tandem carbon-carbon bond-forming reactions.

Cobalt-Catalyzed Enantioselective Hydroboration of α-Substituted Acrylates

Even though metal-catalyzed enantioselective hydroborations of alkenes have attracted enormous attention, few preparatively useful reactions of α-alkyl acrylic acid derivatives are known, and most use rhodium catalysts. No examples of asymmetric hydroboration of the corresponding α-arylacrylic acid esters are known. In our continuing efforts to search for new applications of earth-abundant cobalt catalysts for broadly applicable organic transformations, we have identified 2-(2-diarylphosphinophenyl)oxazoline ligands and mild reaction conditions for efficient and highly regio- and enantioselective hydroboration of α-alkyl- and α-aryl- acrylates, giving β-borylated propionates. Since the C-B bonds in these compounds can be readily replaced by C-O, C-N, and C-C bonds, these intermediates could serve as valuable chiral synthons, some from feedstock carbon sources, for the synthesis of propionate-bearing motifs including polyketides and related molecules. Two-step syntheses of "Roche" ester from methyl methacrylate (79%; er 99:1), arguably the most widely used chiral fragment in polyketide synthesis, and tropic acid esters (∼80% yield; er ∼93:7), which are potential intermediates for several medicinally important classes of compounds, illustrate the power of the new methods. Mechanistic studies confirm the requirement of a cationic Co(I) species [(L)Co]+as the viable catalyst in these reactions and rule out the possibility of a [L]Co-H-initiated route, which has been well-established in related hydroborations of other classes of alkenes. A mechanism involving an oxidative migration of a boryl group to the β-carbon of an η4-coordinated acrylate-cobalt complex is proposed as a plausible route.

Borylated cyclobutanes via thermal [2 + 2]-cycloaddition

A one-step approach to borylated cyclobutanes from amides of carboxylic acids and vinyl boronates is elaborated. The reaction proceeds via the thermal [2 + 2]-cycloaddition of in situ-generated keteniminium salts.

Divergent Synthesis of 1,2,3,4-Tetrasubstituted Cyclobutenes from a Common Scaffold: Enantioselective Desymmetrization by Dual-Catalyzed Photoredox Cross-Coupling

Four-membered carbocycles are important structural motifs found in several natural products and drugs. Amongst those, cyclobutenes are attractive intermediates because the residual olefin can be manipulated selectively into various saturated and unsaturated analogs. Few methods exist to access chiral tri- and tetra-C-substituted cyclobutenes and they are generally limited in terms of diversification. Herein, a divergent synthetic strategy was developed where a single optically enriched scaffold is diversified into a variety of derivatives with different substitution patterns. To this end, the enantioselective desymmetrization of prochiral 1,2-dibromocyclobutene imides was enabled by a dual Ir/Ni-catalyzed photoredox C(sp2 )-C(sp3 ) cross-coupling with an alkyltrifluoroborate salt to install a convertible carbon fragment in good yields and >90 % enantiomeric excess. Exceptional mono-coupling selectivity is observed and the resulting chiral bromocyclobutene serves as a common scaffold that can be transformed in a divergent manner into several valuable 1,2,3,4-tetra-C-substituted cyclobutane products while maintaining optical purity.

Enantioselective Synthesis of Chiral Cyclobutenes Enabled by Brønsted Acid-Catalyzed Isomerization of BCBs

Chiral cyclobutene units are commonly found in natural products and biologically active molecules. Transition-metal-catalysis has been extensively used in asymmetric synthesis of such structures, while organocatalytic approaches remain elusive. In this study, bicyclo[1.1.0]butanes are involved in enantioselective transformation for the first time to offer a highly efficient route toward cyclobutenes with good regio- and enantiocontrol. The utilization of N-triflyl phosphoramide as a chiral Brønsted acid promoter enables this isomerization process to proceed under mild conditions with low catalyst loading as well as good functional group compatibility. The resulting chiral cyclobutenes could serve as platform molecules for downstream manipulations with excellent reservation of stereochemical integrity, demonstrating the synthetic practicality of the developed method. Control experiments have also been performed to verify the formation of a key carbocation intermediate at the benzylic position.

Photochemical [2+2] Cycloaddition of Alkynyl Boronates

A photochemical [2+2] cycloaddition of alkynyl boronates and maleimides is reported. The developed protocol provided 35-70 % yield of maleimide-derived cyclobutenyl boronates and demonstrated wide compatibility with various functional groups. The synthetic utility of the prepared building blocks was demonstrated for a range of transformations, including Suzuki cross-coupling, catalytic or metal-hydride reduction, oxidation, and cycloaddition reactions. With aryl-substituted alkynyl boronates, the products of double [2+2] cycloaddition were obtained predominantly. Using the developed protocol, a cyclobutene-derived analogue of Thalidomide was prepared in one step. Mechanistic studies supported the participation of the triplet-excited state maleimides and ground state alkynyl boronates in the key step of the process.

Catalytic Asymmetric Synthesis of Zinc Metallacycles

Transition-metal-catalyzed reductive coupling reactions of alkynes and imines are attractive methods for the synthesis of chiral allylic amines. Mechanistically, these reactions involve oxidative cyclization of the alkyne and the imine to generate a metallacyclic intermediate, which then reacts with H2 or a H2 surrogate to form the product. As an alternative to this hydrogenolysis pathway, here we show that transmetalation to zinc can occur, forming a zinc metallacycle product. This organozinc product serves as a versatile nucleophile for carbon-carbon and carbon-heteroatom coupling reactions. Mechanistic studies based on isotopic labeling experiments and DFT calculations suggest that the key transmetalation step occurs between a Co(II) species and ZnCl2.

Strain-Inducing Positional Alkene Isomerization

Small, strained ring systems are important pharmacophores in medicinal chemistry and versatile intermediates in organic synthesis. However, the kinetic and thermodynamic instability of many strained organic molecules renders them challenging to prepare. Here, we report a strain-inducing positional alkene isomerization reaction that provides mild and selective access to cyclobutene building blocks from readily obtained cyclobutylidene precursors. This endergonic isomerization relies on the sequential and synergistic action of a decatungstate polyanion photocatalyst and cobaloxime co-catalyst to store potential energy in the form of ring strain. The versatility of the cyclobutene products is demonstrated through diverse subsequent strain-releasing transformations. Mechanistic studies reveal a steric basis for strain-selective product formation.

Ethene-1,1-disulfonyl Difluoride (EDSF) for SuFEx Click Chemistry: Synthesis of SuFExable 1,1-Bissulfonylfluoride Substituted Cyclobutene Hubs

We present the synthesis of 1,1-bis(fluorosulfonyl)-2-(pyridin-1-ium-1-yl)ethan-1-ide, a bench-stable precursor to ethene-1,1-disulfonyl difluoride (EDSF). The novel SuFEx reagent, EDSF, is demonstrated in the preparation of 26 unique 1,1-bissulfonylfluoride substituted cyclobutenes via a cycloaddition reaction. The regioselective click cycloaddition reaction is rapid, straightforward, and highly efficient, enabling the generation of highly functionalized 4-membered ring (4MR) carbocycles. These carbocycles are valuable structural motifs found in numerous bioactive natural products and pharmaceutically relevant small molecules. Additionally, we showcase diversification of the novel cyclobutene cores through selective Cs2 CO3 -activated SuFEx click chemistry between a single S-F group and an aryl alcohol, yielding the corresponding sulfonate ester products with high efficiency. Finally, density functional theory calculations offer mechanistic insights about the reaction pathway.

Cobalt-Catalyzed Diastereo- and Enantioselective Carbon-Carbon Bond Forming Reactions of Cyclobutenes

Catalytic enantioselective functionalization of cyclobutenes constitutes a general and modular strategy for construction of enantioenriched complex cyclobutanes bearing multiple stereogenic centers, as chiral four-membered rings are common motifs in biologically active molecules and versatile intermediates in organic synthesis. However, enantioselective synthesis of cyclobutanes through such a strategy remained significantly limited. Herein, we report a series of unprecedented cobalt-catalyzed carbon-carbon bond forming reactions of cyclobutenes that are initiated through enantioselective carbometalation. The protocols feature diastereo- and enantioselective introduction of allyl, alkynyl, and functionalized alkyl groups. Mechanistic studies indicated an unusual 1,3-cobalt migration and subsequent β-carbon elimination cascade process occurred in the allyl addition. These new discoveries established a new elementary process for cobalt catalysis and an extension of diversity of nucleophiles for enantioselective transformations of cyclobutenes.

Chemodivergent, Regio- and Enantioselective Cycloaddition Reactions between 1,3-Dienes and Alkynes

Alkynes and 1,3-dienes are among the most readily available precursors for organic synthesis. We report two distinctly different, catalyst-dependent, modes of regio- and enantioselective cycloaddition reactions between these classes of compounds providing rapid access to highly functionalized 1,4-cyclohexadienes or cyclobutenes from the same precursors. Complexes of an earth abundant metal, cobalt, with several commercially available chiral bisphosphine ligands with narrow bite angles catalyze [4+2]-cycloadditions between a 1,3-diene and an alkyne giving a cyclohexa-1,4-diene in excellent chemo-, regio- and enantioselectivities. In sharp contrast, complex of a finely tuned phosphino-oxazoline ligand promotes unique [2+2]-cycloaddition between the alkyne and the terminal double bond of the diene giving a highly functionalized cyclobutene in excellent regio- and enantioselectivities.

Precise Synthesis of Chiral Z-Allylamides by Cobalt-Catalyzed Asymmetric Sequential Hydrogenations

Asymmetric sequential hydrogenations of conjugated enynes have been developed using a Ph-BPE-Co^I catalyst for the precise synthesis of chiral Z-allylamides in high activity (up to 1000 substrate/catalyst (S/C)) and with excellent enantioselectivity (up to >99 % enantiomeric excess (ee)). Mechanism experiments and theoretical calculations support a cationic Co^I /Co^III redox catalytic cycle. The catalytic activity difference between cobalt complexes of Ph-BPE and QuinoxP* was explained by the process decomposition of rate-determining step in the second hydrogenation.

Synthesis of 3-borylated cyclobutanols from epihalohydrins or epoxy alcohol derivatives

There is an increasing interest in cyclobutanes within the medicinal chemistry community. Therefore, methods to prepare cyclobutanes that contain synthetic handles for further elaboration are of interest. Herein, we report a new approach for the synthesis of 3-borylated cyclobutanols via a formal [3 + 1]-cycloaddition using readily accessible 1,1-diborylalkanes and epihalohydrins or epoxy alcohol derivatives. 1-Substituted epibromohydrin starting materials provide access to borylated cyclobutanols containing substituents at three of the four positions on the cyclobutane core, and enantioenriched epibromohydrins lead to enantioenriched cyclobutanols with high levels of enantiospecificity (>98%). Finally, derivatization studies demonstrate the synthetic utility of both the OH and Bpin handles.

Selective Reductive Coupling of Vinyl Azaarenes and Alkynes via Photoredox Cobalt Dual Catalysis

A visible light-induced Co-catalyzed highly regio- and stereoselective reductive coupling of vinyl azaarenes and alkynes has been developed. Notably, Hünig's base together with simple ethanol has been successfully applied as the hydrogen sources instead of commonly used Hantzsch esters in this catalytic photoredox reaction. This approach has considerable advantages for the straightforward synthesis of stereodefined multiple substituted alkenes bearing an azaarene motif, such as excellent regioselectivity (>20 : 1 for >30 examples) and stereoselectivity (>20 : 1 E/Z), broad substrate scope and good functional group compatibility under mild reaction conditions, which has been utilized in the concise synthesis of natural product monomorine I. A reasonable catalytic reaction pathway involving protolysis of the cobaltacyclopentene intermediate has been proposed based on the mechanistic studies.

Boronic Ester Enabled [2 + 2]-Cycloadditions by Temporary Coordination: Synthesis of Artochamin J and Piperarborenine B

A strategy for the photosensitized cycloaddition of alkenylboronates and allylic alcohols by a temporary coordination is presented. The process allows for the synthesis of a diverse range of cyclobutylboronates. Key to development of these reactions is the temporary coordination of the allylic alcohol to the Bpin unit. This not only allows for the reaction to proceed in an intramolecular manner but also allows for high levels of stereo and regiocontrol. A key aspect of these studies is the utility of the cycloadducts in the synthesis of complex natural products artochamin J and piperarborenine B.

Cobalt-Catalyzed Divergent Cycloadditions of Alkynes with Conjugated Dienes Yielding 3-Vinylcyclobutenes, Bicyclo[3.1.0]hexenes, and Cyclohexa-1,4-dienes

A traditional cobalt catalyst system still contains undiscovered reactivity. Depending on the tertiary phosphines and substrates used, the catalytic system using CoBr₂/tertiary phosphine/Zn/ZnI₂ catalyzes divergent cycloadditions of internal alkynes with conjugated dienes, yielding 3-alkenylcyclobut-1-enes, bicyclo[3.1.0]hexenes, and cyclohexa-1,4-dienes. A [CoBr₂(PPh₃)₂]/Zn/ZnI₂-catalyzed reaction of 3-hexyne (1a) with 1-(4-methoxyphenyl)butadiene (2a) at room temperature in CH₂Cl₂ exclusively produces a [2 + 2] cycloaddition product (E)-2-(2,3-diethylcyclobut-2-ene-1-yl)vinyl-4-methoxybenzene (3aa). When [CoBr₂(dppp)]/Zn/ZnI₂ is used as a catalyst, a bicyclic compound 6-(4-methoxyphenyl)-2,3-diethylbicyclo[3.1.0]hex-2-ene (4aa) is dominantly formed in a 77% yield. The CoBr₂/dppe/Zn/ZnI₂ system can undergo a [2 + 4] cycloaddition to yield 3-(4-anisyl)-1,2-diethylcyclohexa-1,4-diene (5aa) as the dominant product in 38% yield. The bite angles of the ligands used contribute significantly to this catalytic diversity.

Copper-catalyzed radical cascade reaction of simple cyclobutanes: synthesis of highly functionalized cyclobutene derivatives

Cyclobutenes as versatile and highly valuable synthons have been widely applied in synthesis. Although various methods for their synthesis have been well established, new strategies for the construction of the cyclobutene skeleton from simple substrates are still highly desirable. Starting from simple cyclobutanes, the construction of the cyclobutene skeleton especially introducing multiple functional groups simultaneously had never been achieved. Here, we developed a novel radical cascade strategy for the synthesis of highly functionalized cyclobutenes directly from cyclobutanes involving rare cleavage of four or five C–H bonds and formation of two C–N/C–S or three C–Br bonds. With copper as catalyst and N-fluorobenzenesulfonimide (NFSI) as oxidant, a wide range of diaminated, disulfonylated and tribrominated cyclobutene derivatives were efficiently synthesized.

A novel radical cascade strategy for the synthesis of highly functionalized cyclobutenes directly from cyclobutanes involving rare four or five C–H bonds cleavage and two C–N/C–S or three C–Br bonds formation has been successfully developed.

Activator-free single-component Co(I)-catalysts for regio- and enantioselective heterodimerization and hydroacylation reactions of 1,3-dienes. New reduction procedures for synthesis of [L]Co(I)-complexes and comparison to in situ generated catalysts

Although cobalt(I) bis-phosphine complexes have been implicated in many selective C-C bond-forming reactions, until recently relatively few of these compounds have been fully characterized or have been shown to be intermediates in catalytic reactions. In this paper we present a new practical method for the synthesis and isolation of several cobalt(I)-bis-phosphine complexes and their use in Co(I)-catalyzed reactions. We find that easily prepared (in situ generated or isolated) bis-phosphine and (2,6-N-aryliminoethyl)pyridine (PDI) cobalt(II) halide complexes are readily reduced by 1,4-bis-trimethylsilyl-1,4-dihydropyrazine or commercially available lithium nitride (Li₃N), leaving behind only innocuous volatile byproducts. Depending on the structures of the bis-phosphines, the cobalt(I) complex crystallizes as a phosphine-bridged species [(P∼P)(X)Co^I[μ-(P∼P)]Co^I(X)(P∼P)] or a halide-bridged species [(P∼P)Co^I[μ-(X)]₂Co^I(P∼P)]. Because the side-products are innocuous, these methods can be used for the in situ generation of catalytically competent Co(I) complexes for a variety of low-valent cobalt-catalyzed reactions of even sensitive substrates. These complexes are also useful for the synthesis of rare cationic [(P∼P)Co^I-η⁴-diene]⁺ X^- or [(P∼P)Co^I-η⁶-arene]⁺ X^- complexes, which are shown to be excellent single-component catalysts for the following regioselective reactions of dienes: heterodimerizations with ethylene or methyl acrylate, hydroacylation and hydroboration. The reactivity of the single-component catalysts with the in situ generated species are also documented.

Photosensitized [2+2]-Cycloadditions of Alkenylboronates and Alkenes

A new strategy for the synthesis of highly versatile cyclobutylboronates via the photosensitized [2+2]-cycloaddition of alkenylboronates and alkenes is presented. The process is mechanistically different from other processes in that energy transfer occurs with the alkenylboronate as opposed to the other alkene. This strategy allows for the synthesis of an array of diverse cyclobutylboronates. The conversion of these adducts to other compounds as well as their utility in the synthesis of melicodenine C is demonstrated.

Mechanism and Origins of Enantioselectivity of Cobalt-Catalyzed Intermolecular Hydroarylation/Cyclization of 1,6-Enynes with N-Pyridylindoles

Density functional theory calculations were performed to investigate the cobalt-catalyzed intermolecular hydroarylation/cyclization of 1,6-enynes with N-pyridylindoles. The computations reveal that the reaction begins with the oxidative cyclization of 1,6-enyne to afford the five-membered cobaltacycle, from which the metal-assisted σ-bond metathesis/C-C reductive elimination led to the final hydroarylation/cyclization product. The initial oxidative cyclization constitutes the rate-determining step of the overall reaction. The steric repulsion and π···π interaction were found to play a crucial role in dictating the experimentally observed enantioselectivity.

Three-Component Coupling of Arenes, Ethylene, and Alkynes Catalyzed by a Cationic Bis(phosphine) Cobalt Complex: Intercepting Metallacyclopentenes for C-H Functionalization

A cobalt-catalyzed intermolecular three-component coupling of arenes, ethylene, and alkynes was developed using the well-defined air-stable cationic bis(phosphine) cobalt(I) complex, [(dcype)Co(η⁶-C₇H₈)][BAr^F₄] (dcype = 1,2-bis(dicyclohexylphosphino)ethane; BAr^F₄ = B[(3,5-(CF₃)₂)C₆H₃]₄), as the precatalyst. All three components were required for turnover and formation of ortho-homoallylated arene products. A range of directing groups including amide, ketone, and 2-pyridyl substituents on the arene promoted the reaction. The cobalt-catalyzed method exhibited broad functional group tolerance allowing for the late-stage functionalization of two drug molecules, fenofibrate and haloperidol. A series of control reactions, deuterium labeling studies, resting state analysis, as well as synthesis of substrate- and product-bound η⁶-arene complexes supported a pathway involving C(sp²)–H activation from a cobalt(III) metallacycle.

Catalytic asymmetric hydrometallation of cyclobutenes with salicylaldehydes

Chiral, substituted cyclobutanes are common motifs in bioactive compounds and intermediates in organic synthesis but few asymmetric routes for their synthesis are known.

A New Paradigm in Enantioselective Cobalt Catalysis: Cationic Cobalt(I) Catalysts for Heterodimerization, Cycloaddition, and Hydrofunctionalization Reactions of Olefins

One of the major challenges facing organic synthesis in the 21st century is the utilization of abundantly available feedstock chemicals for fine chemical synthesis. Regio- and enantioselective union of easily accessible 1,3-dienes and other feedstocks like ethylene, alkyl acrylates, and aldehydes can provide valuable building blocks adorned with latent functionalities for further synthetic elaboration. Through an approach that relies on mechanistic insights and systematic examination of ligand and counterion effects, we developed an efficient cobalt-based catalytic system [(P∼P)CoX2/Me3Al] (P∼P = bisphosphine) to effect the first enantioselective heterodimerization of several types of 1,3-dienes with ethylene. In addition to simple cyclic and acyclic dienes, siloxy-1,3-dienes participate in this reaction, giving highly functionalized, nearly enantiopure silyl enolates, which can be used for subsequent C-C and C-X bond-forming reactions. As our understanding of the mechanism of this reaction improved, our attention was drawn to more challenging partners like alkyl acrylates (one of the largest volume feedstocks) as the olefin partners instead of ethylene. Prompted by the intrinsic limitations of using aluminum alkyls as the activators for this reaction, we explored the fundamental chemistry of the lesser known (P∼P)Co(I)X species and discovered that in the presence of halide sequestering agents, such as sodium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (NaBARF) or (C6F5)3B, certain chiral bisphosphine complexes are superb catalysts for regio- and enantioselective heterodimerization of 1,3-dienes and alkyl acrylates. We have since found that these cationic Co(I) catalysts, most conveniently prepared in situ by reduction of the corresponding cobalt(II) halide complexes by zinc in the presence of NaBARF, promote enantioselective [2 + 2]-cycloaddition between alkynes and an astonishing variety of alkenyl derivatives to give highly functionalized cyclobutenes. In reactions between 1,3-enynes and ethylene, the [2 + 2]-cycloaddition between the alkyne and ethylene is followed by a 1,4-addition of ethylene in a tandem fashion to give nearly enantiopure cyclobutanes with an all-carbon quaternary center, giving a set of molecules that maps well into many medicinally relevant compounds. In another application, we find that the cationic Co(I)-catalysts promote highly selective hydroacylation and 1,2-hydroboration of prochiral 1,3-dienes. Further, we find that a cationic Co(I)-catalyst promotes cycloisomerization followed by hydroalkenylation of 1,6-enynes to produce highly functionalized carbo- and heterocyclic compounds. Surprisingly the regioselectivity of the alkene addition depends on whether it is a simple alkene or an acrylate, and the acrylate addition produces an uncommon Z-adduct. This Account will provide a summary of the enabling basic discoveries and the attendant developments that led to the unique cationic Co(I)-complexes as catalysts for disparate C-C and C-B bond-forming reactions. It is our hope that this Account will stimulate further work with these highly versatile catalysts which are derived from an earth-abundant metal.

Palladium-Catalyzed Carbene Coupling Reactions of Cyclobutanone N-Sulfonylhydrazones

Described herein are the palladium-catalyzed cross-coupling reactions of cyclobutanone-derived N-sulfonylhydrazones with aryl or benzyl halides, suggesting that the metal carbene process and β-hydride elimination can smoothly occur in strained ring systems. Structurally diversified products including cyclobutenes, methylenecyclobutanes, and conjugated dienes are selectively afforded in good to excellent yields. Preliminary success in asymmetric carbene coupling reactions in strained ring systems has been achieved, providing a promising route for the synthesis of enantioenriched four-membered-ring molecules.

A Modular Access to 1,2- and 1,3-Disubstituted Cyclobutylboronic Esters by Consecutive Radical Additions

A modular approach to substituted cyclobutylboronic esters is described. It proceeds by successive intermolecular radical additions of xanthates to pinacolato 1-cyclobutenylboronate and to pinacolato bicyclo[1.1.0]but-1-ylboronate. Success hinges on tuning the stability of the α-boryl radical by exploiting the stabilizing influence of the trivalent boronic ester and the slightly destabilizing cyclobutane, which increases the σ-character of the radical. Reductive removal of the xanthate group finally provides a range of 1,2- and 1,3-disubstituted cyclobutylboronic esters. The contrast with cyclopropylboronic esters is striking, since the strong destabilization by the highly strained cyclopropane ring allows the first radical addition to take place but not the second. Furthermore, the first adducts are geminal xanthyl boronic esters that can be converted into cyclobutanones. This chemistry furnishes cyclobutylboronic esters that would be quite difficult to obtain otherwise and thus complements existing methods.

Asymmetric [3 + 1]-Cycloaddition Reaction via Diazo Discrimination

The enantioselective [3 + 1]-cycloaddition of two structurally different diazo compounds has been achieved using chiral bisoxazoline copper(I) complexes as a catalyst, providing a novel route for the synthesis of cyclobutenes containing a quaternary stereocenter. Typically, this reaction represents the first example of asymmetric cross-electrophile coupling of two diazo substrates via carbene discrimination.

Regio- and Stereoselective Synthesis of Multi-Alkylated Allylic Boronates through Three-Component Coupling Reactions between Allenes, Alkyl Halides, and a Diboron Reagent

Multisubstituted allylic boronates are attractive and valuable precursors for the rapid and stereoselective construction of densely substituted carbon skeletons. Herein, we report the first synthetic approach for differentially 2,3,3-trialkyl-substituted allylic boronates that contain a stereodefined tetrasubstituted alkene structure. Copper(I)-catalyzed regio- and stereoselective three-component coupling reactions between gem-dialkylallenes, alkyl halides, and a diboron reagent afforded sterically congested allylic boronates. The allylboration of aldehydes diastereoselectively furnished the corresponding homoallylic alcohols that bear a quaternary carbon. A computational study revealed that the selectivity-determining mechanism was correlated to the coordination of a boryl copper(I) species to the allene substrate as well as the borylcupration step.

α- and β-Functionalized Ketones from 1,3-Dienes and Aldehydes: Control of Regio- and Enantioselectivity in Hydroacylation of 1,3-Dienes

Ketones are among the most widely used intermediates in organic synthesis, and their synthesis from inexpensive feedstocks could be quite impactful. Regio- and enantioselective hydroacylation reactions of dienes provide facile entry into useful ketone-bearing chiral motifs with an additional latent functionality (alkene) suitable for further elaboration. Three classes of dienes, 2- or 4-monosubstituted and 2,4-disubstituted 1,3-dienes, undergo cobalt(I)-catalyzed regio- and enantioselective hydroacylation, giving products with high enantiomeric ratios (er). These reactions are highly dependent on the ligands, and we have identified the most useful ligands and reaction conditions for each class of dienes. 2-Substituted and 2,4-disubstituted dienes predominantly undergo 1,2-addition, whereas 4-substituted terminal dienes give highly enantioselective 4,1- or 4,3-hydroacylation depending on the aldehyde, aliphatic aldehydes giving 4,1-addition and aromatic aldehydes giving 4,3-addition. Included among the substrates are feedstock dienes, isoprene (US$1.4/kg) and myrcene (US$129/kg), and several common aldehydes. We propose an oxidative dimerization mechanism that involves a Co(I)/Co(III) redox cycle that appears to be initiated by a cationic Co(I) intermediate. Studies of reactions using isolated neutral and cationic Co(I) complexes confirm the critical role of the cationic intermediates in these reactions. Enantioselective 1,2-hydroacylation of 2-trimethylsiloxy-1,3-diene reveals a hitherto undisclosed route to chiral siloxy-protected aldols. Finally, facile syntheses of the anti-inflammatory drug (S)-Flobufen (2 steps, 92% yield, >99:1 er) and the food additive (S)-Dihydrotagetone (1 step, 83% yield; 96:4 er) from isoprene illustrate the power of this method for the preparation of commercially relevant compounds.

Enantioselective Cyclobutenylation of Olefins Using N-Sulfonyl-1,2,3-Triazoles as Vicinal Dicarbene Equivalents

Cyclobutenes are highly useful synthetic intermediates as well as important motifs in bioactive small molecules. Herein, we report a regio-, chemo-, and enantioselective synthesis of cyclobutenes from olefins using N-sulfonyl-1,2,3-triazoles as vicinal dicarbene equivalents or alkyne [2 + 2] cycloaddition surrogates. Terminal and cis-olefins can be transformed into enantioenriched cyclopropanes via rhodium catalysis. Then, in one pot, treatment of these intermediates with tosyl hydrazide and base effects diazo formation followed by rhodium-catalyzed ring expansion to yield enantioenriched cyclobutenes. These cyclobutenes can be transformed into highly substituted, enantioenriched cyclobutanes, including structures relevant to natural product scaffolds.

Cationic Co(I) Catalysts for Regiodivergent Hydroalkenylation of 1,6-Enynes. An Uncommon cis-β-C-H Activation Leads to Z-Selective Coupling of Acrylates

Two intermolecular hydroalkenylation reactions of 1,6-enynes are presented which yield substituted 5-membered carbo- and -heterocycles. This reactivity is enabled by a cationic bis-diphenylphosphinopropane (DPPP)Co^I species which forms a cobaltacyclopentene intermediate by oxidative cyclization of the enyne. This key species interacts with alkenes in distinct fashion, depending on the identity of the coupling partner to give regiodivergent products. Simple alkenes undergo insertion reactions to furnish 1,3-dienes whereby one of the alkenes is tetrasubstituted. When acrylates are employed as coupling partners, the site of intermolecular C-C formation shifts from the alkyne to the alkene motif of the enyne, yielding Z-substituted-acrylate derivatives. Computational studies provide support for our experimental observations and show that the turnover-limiting steps in both reactions are the interactions of the alkenes with the cobaltacyclopentene intermediate via either a 1,2-insertion in the case of ethylene, or an unexpected β-C-H activation in the case of most acrylates. Thus, the H syn to the ester is activated through the coordination of the acrylate carbonyl to the cobaltacycle intermediate, which explains the uncommon Z-selectivity and regiodivergence. Variable time normalization analysis (VTNA) of the kinetic data reveals a dependance upon the concentration of cobalt, acrylate, and activator. A KIE of 2.1 was observed with methyl methacrylate in separate flask experiments, indicating that C-H cleavage is the turnover-limiting step in the catalytic cycle. Lastly, a Hammett study of aryl-substituted enynes yields a ρ value of -0.4, indicating that more electron-rich substituents accelerate the rate of the reaction.

Challenges in the Highly Selective [3 + 1]-Cycloaddition of an Enoldiazoacetamide to Form a Donor-Acceptor Cis-Cyclobutenecarboxamide

A substituted donor-acceptor cyclobutenecarboxamide is synthesized with modest enantiocontrol through a chiral copper(I) complex catalyzed [3 + 1]-cycloaddition reaction of α-acyl diphenylsulfur ylides with 3-siloxy-2-diazo-3-butenamides. With a methyl substituent on the 4-position of the 3-butenamide, the cis-vicinal-3,4-disubstituted cyclobutenecarboxamide is formed with >20:1 diastereocontrol. Donor-acceptor 3-methyl-2-siloxycyclopropenecarboxamide is rapidly formed from the reactant enoldiazoamide and undergoes catalytic ring opening to give only the Z-γ-substituted metallo-enolcarbene. Elimination from 3-siloxy-2-diazo-3-pentenamide to form the conjugated 3-siloxy-2,4-pentadienamide is competitive but minimized at low temperature.

Highly Regio- and Enantioselective Reductive Coupling of Alkynes and Aldehydes via Photoredox Cobalt Dual Catalysis

A Co-catalyzed highly regio- and enantioselective reductive coupling of alkynes and aldehydes has been developed under visible light photoredox dual catalysis. A variety of enantioenriched allylic alcohols have been obtained by using unsymmetrical internal alkynes and commercially available catalyst, chiral ligand, and reagents. It is noteworthy that this approach has considerable advantages, such as excellent regio- (>95:5 for >40 examples), stereo- (up to >95:5 E/Z), and enantioselectivity (92-99% ee, >35 examples) control, mild reaction conditions, broad substrate scope, and good functional group compatibility, making it a great improvement to enantioselective alkyne-aldehyde reductive coupling reactions.

Construction of Complex Cyclobutane Building Blocks by Photosensitized [2 + 2] Cycloaddition of Vinyl Boronate Esters

Cyclobutyl moieties in drug molecules are rare, and in general, they are minimally substituted and stereochemically simple. Methods to assemble structurally complex cyclobutane building blocks suitable for rapid diversification are thus highly desirable. We report herein a photosensitized [2 + 2] cycloaddition with vinyl boronate esters affording straightforward access to complex, densely functionalized cyclobutane scaffolds. Mechanistic studies suggest an activation mode involving energy transfer to the styrenyl alkene rather than the vinyl boronate ester.

Co-Catalyzed Asymmetric Intramolecular [3+2] Cycloaddition of Yne-Alkylidenecyclopropanes and its Reaction Mechanism

Developing new transition metal-catalyzed asymmetric cycloadditions for the synthesis of five-membered carbocycles (FMCs) is a research frontier in reaction development due to the ubiquitous presence of chiral FMCs in various functional molecules. Reported here is our discovery of a highly enantioselective intramolecular [3+2] cycloaddition of yne-alkylidenecyclopropanes (yne-ACPs) to bicyclo[3.3.0]octadiene and bicyclo[4.3.0]nonadiene molecules using a cheap Co catalyst and commercially available chiral ligand (S)-Xyl-BINAP. This reaction avoids the use of precious Pd and Rh catalysts, which are usually the choices for [3+2] reactions with ACPs. The enantiomeric excess in the present reaction can be up to 92 %. Cationic cobalt(I) species was suggested by experiments as the catalytic species. DFT calculations showed that this [3+2] reaction starts with oxidative cyclometallation of alkyne and ACP, followed by ring opening of the cyclopropyl (CP) group and reductive elimination to form the cycloadduct. This mechanism is different from previous [3+2] reactions of ACPs, which usually start from CP cleavage, not from oxidative cyclization.

Substrate-Controlled Regioselective Bromination of 1,2-Disubstituted Cyclobutenes: An Application in the Synthesis of 2,3-Disubstituted Cyclobutenones

Easily available disubstituted cyclobutenes were regioselectively halogenated at the allylic position by means of a reaction with bromine. The regioselectivity of bromination is controlled by the presence of a carbocation-stabilizing group. The prepared disubstituted 3-bromocyclobutenes were converted into the corresponding disubstituted cyclobutenones. On the basis of the performed experiments, the mechanism behind the bromination reaction was also proposed.

Uncommon Four-Membered Building Blocks - Cyclobutenes, Azetines and Thietes

Strained ring systems have gained considerable importance over the last few years for their implication in natural product syntheses or in drug discovery programs. We present herein a recollection of our work on the construction and functionalization of unsaturated four-membered carbo- and heterocycles in the context of the literature, as well as their applications in further reactions.

Highly Enantioselective Cobalt-Catalyzed (3+2) Cycloadditions of Alkynylidenecyclopropanes

Low-valent cobalt complexes equipped with chiral ligands can efficiently promote highly enantioselective (3+2) cycloadditions of alkyne-tethered alkylidenecyclopropanes. The annulation allows to assemble bicyclic systems containing five-membered rings in good yields and with excellent enantiomeric ratios. We also present a mechanistic discussion based on experimental and computational data, which support the involvement of Co^I /Co^III catalytic cycles.

Iron-Catalyzed Vinylsilane Dimerization and Cross-Cycloadditions with 1,3-Dienes: Probing the Origins of Chemo- and Regioselectivity

The selective, intermolecular, homodimerization and cross-cycloaddition of vinylsilanes with unbiased 1,3-dienes, catalyzed by a pyridine-2,6-diimine (PDI) iron complex is described. In the absence of a diene coupling partner, vinylsilane hydroalkenylation products were obtained chemoselectively with unusual head-to-head regioselectivity (up to >98% purity, 98:2 E/Z). In the presence of a 4- or 2-substituted diene coupling partner, under otherwise identical reaction conditions, formation of value-added [2+2]- and [4+2]-cycloadducts, respectively, was observed. The chemoselectivity profile was distinct from that observed for analogous α-olefin dimerization and cross-reactions with 1,3-dienes. Mechanistic studies conducted with well-defined, single-component precatalysts (MePDI)Fe(L2) (where MePDI = 2,6-(2,6-Me2-C6H3N═CMe)2C5H3N; L2 = butadiene or 2(N2)) provided insights into the kinetic and thermodynamic factors contributing to the substrate-controlled regioselectivity for both the homodimerization and cross cycloadditions. Diamagnetic iron diene and paramagnetic iron olefin complexes were identified as catalyst resting states, were characterized by in situ NMR and Mössbauer spectroscopic studies, and were corroborated with DFT calculations. Stoichiometric reactions and computational models provided evidence for a common mechanistic regime where competing steric and orbital-symmetry requirements dictate the regioselectivity of oxidative cyclization. Although distinct chemoselectivity profiles were observed in cross-cycloadditions with the vinylsilane congeners of α-olefins, these products arose from metallacycles with the same connectivity. The silyl substituents ultimately governed the relative rates of β-H elimination and C-C reductive elimination to dictate final product formation.

Iron-catalysed synthesis and chemical recycling of telechelic 1,3-enchained oligocyclobutanes

Closed-loop recycling offers the opportunity to mitigate plastic waste through reversible polymer construction and deconstruction. Although examples of chemical recycling of polymers are known, few have been applied to materials derived from abundant commodity olefinic monomers, which are the building blocks of ubiquitous plastic resins. Here we describe a [2+2] cycloaddition/oligomerization of 1,3-butadiene to yield a previously unrealized telechelic microstructure of (1,n'-divinyl)oligocyclobutane. This material is thermally stable, has stereoregular segments arising from chain-end control, and exhibits high crystallinity even at low molecular weight. Exposure of the oligocyclobutane to vacuum in the presence of the pyridine(diimine) iron precatalyst used to synthesize it resulted in deoligomerization to generate pristine butadiene, demonstrating a rare example of closed-loop chemical recycling of an oligomeric material derived from a commodity hydrocarbon feedstock.