Olefin Metathesis in Confined Geometries: A Biomimetic Approach toward Selective Macrocyclization

Continuous Synthesis of a Macrocyclic Sulfite of Polyethylene Glycol by Cascaded Continuous Stirred Tank Reactors (CSTRs)

Many macrocyclic compounds are attractive drug-like molecules or intermediates due to their special properties. However, the bulk synthesis of such compounds are hindered by the necessity of using diluted solutions, in order to prevent intermolecular reactions that yields oligomer impurities, thereby resulting in a low production efficiency. Such challenge can be adequately addressed by using continuous reactors, allowing improved efficiency with smaller space footprints. In this work, we proposed a novel continuous process for the synthesis of a macrocyclic sulfite of tetraethylene glycol (PEG4-MCSi), which is a precursor to a very useful building block, PEG4-macrocyclic sulfate (PEG4-MCS). The basic reaction parameters, including stoichiometry and temperature, were first confirmed with small batch reactions, and the effectiveness of coiled reactors and continuous stirred tank reactors (CSTRs) were compared. Cascaded CSTRs were proven to be suitable, and the reaction parameters were subject to further optimization to give a robust continuous process. The process was then tested with 4 parallel runs for up to 64 h. Finally, the merits and demerits of batch and continuous reactions were also compared, demonstrating the suitability of latter in the bulk production of macrocyclic PEG-MCSi compounds.

Disentanglement of Surface and Confinement Effects for Diene Metathesis in Mesoporous Confinement

We study the effects of a planar interface and confinement on a generic catalytically activated ring-closing polymerization reaction near an unstructured catalyst. For this, we employ a coarse-grained polymer model using grand-canonical molecular dynamics simulations with a Monte Carlo reaction scheme. Inspired by recent experiments in the group of M. Buchmeiser that demonstrated an increase in ring-closing selectivity under confinement, we show that both the interface effects, i.e., placing the catalyst near a planar wall, and the confinement effects, i.e., locating the catalyst within a pore, lead to an increase of selectivity. We furthermore demonstrate that curvature effects for cylindrical mesopores (2 nm < d < 12.3 nm) influence the distribution of the chain ends, leading to a further increase in selectivity. This leads us to speculate that specially corrugated surfaces might also help to enhance catalytically activated polymerization processes.

Mizoroki-Heck Macrocyclization Reactions at 1 M Concentration Catalyzed by Sub-nanometric Palladium Clusters

The synthesis of cyclized organic compounds with more than ten atoms (macrocycles) is traditionally based on reversible reactions under highly diluted conditions, typically <0.05 M, in order to circumvent the formation of intermolecular products. These reaction conditions severely hamper industrial productivity and the use of solid catalysts. Herein, it is shown that the intramolecular Mizoroki-Heck reaction of ω-iodide cinnamates proceeds at 1 M concentration when catalyzed by few-atom Pd clusters, either in solution or supported on a solid, to give different macrocycles in good yields. This paradigmatic increase in reaction concentration not only opens the door for macrocycle production with high throughputs but also enables the use of solid catalysts for a macrocyclization reaction in flow.

Effect of liquid confinement on regioselectivity in the hydrosilylation of alkynes with cationic Rh(I) N-heterocyclic carbene catalysts

Polymeric mesoporous monoliths were prepared via ring-opening metathesis polymerization (ROMP) from norbornene (NBE), 1,4,4a,5,8,8a-hexahydro-1,4,5,8-exo,endo-dimethanonaphthalene (DMN-H6), tris(norborn-2-enylmethylenoxy)methylsilane and the 1st-generation Grubbs catalyst [RuCl2(PCy3)2(CHC6H5)] in the presence of 2-propanol and toluene and surface grafted with 1-(2-((norborn-5-ene-2-carbonyl)oxy)ethyl)-3-ethyl-1H-imidazol-3-ium tetrafluoroborate. Subsequently, a supported ionic-liquid-phase (SILP) system was created by immobilizing the ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4] with the cationic catalyst [Rh((1-pyrid-1-yl)-3-mesitylimidazol-2-ylidene)(COD)+BF4-] (Rh-1; COD = 1,4-cyclooctadiene) dissolved therein. The regio- and stereoselectivity of Rh-1 dissolved in the IL and supported on the mesoporous monolith, referred to as Rh@SILPROMP, in the hydrosilylation of 1-alkynes with HSiMe2Ph was studied and compared to that of the homogeneous catalyst Rh-1 under biphasic conditions using methyl tert-butyl ether (MTBE) as a second organic phase. Different amounts of IL were used, which allowed for the creation of SILPs with different layer thicknesses. Rh@SILPROMP provided by far better β-(Z) selectivity for both aromatic and aliphatic 1-alkynes in comparison to Rh-1 used under biphasic conditions. The highest β-(Z) selectivity was obtained with the thinnest IL layer. No leaching of the IL or rhodium from the SILP system into the organic phase was observed, resulting in virtually metal-free hydrosilylation products. The data obtained with Rh@SILPROMP were also compared with those from previous studies with Rh-1 in the same IL supported on polyurethane-derived mesoporous monolithic supports (Rh@SILPPUR) and on mesoporous SBA-15 (Rh@SILPSBA-15). For the first time, the use of a liquid confinement created by both a SILP and the support itself to tune the transition state of an organometallic catalyst by non-covalent interactions and thus stereo- and regioselectivity is outlined.

How Solid Surfaces Control Stability and Interactions of Supported Cationic CuI(dppf) Complexes─A Solid-State NMR Study

Organometallic complexes are frequently deposited on solid surfaces, but little is known about how the resulting complex-solid interactions alter their properties. Here, a series of complexes of the type Cu(dppf)(L_x)⁺ (dppf = 1,1'-bis(diphenylphosphino)ferrocene, L_x = mono- and bidentate ligands) were synthesized, physisorbed, ion-exchanged, or covalently immobilized on solid surfaces and investigated by ³¹P MAS NMR spectroscopy. Complexes adsorbed on silica interacted weakly and were stable, while adsorption on acidic γ-Al₂O₃ resulted in slow complex decomposition. Ion exchange into mesoporous Na-[Al]SBA-15 resulted in magnetic inequivalence of ³¹P nuclei verified by ³¹P-³¹P RFDR and ¹H-³¹P FSLG HETCOR. DFT calculations verified that a MeCN ligand dissociates upon ion exchange. Covalent immobilization via organic linkers as well as ion exchange with bidentate ligands both lead to rigidly bound complexes that cause broad ³¹P CSA tensors. We thus demonstrate how the interactions between complexes and functional surfaces determine and alter the stability of complexes. The applied Cu(dppf)(L_x)⁺ complex family members are identified as suitable solid-state NMR probes for investigating the influence of support surfaces on deposited inorganic complexes.

Disclosing the leaching behaviour of Pd@CMK3 catalysts in formic acid decomposition by electron tomography

Supported nanocatalysts exhibit different performances in batch and fixed bed reactors for a wide range of liquid phase catalytic reactions due to differences in metal leaching. To investigate this leaching process and its influence on the catalytic performance, a quantitative 3D characterization of the particle size and the particle distribution is important to follow the structural evolution of the active metal catalysts supported on porous materials during the reaction. In this work, electron tomography has been applied to uncover leaching and redeposition of a Pd@CMK3 catalyst during formic acid decomposition in batch and fixed bed reactors. The 3D distribution of Pd NPs on the mesoporous carbon CMK3 has been determined by a quantitative tomographic analysis and the determined structural changes are correlated with the observed differences in activity and stability of formic acid decomposition using batch and fixed bed reactors.

Recent developments in visible light induced polymerization towards its application to nanopores

Visible light induced polymerizations are a strongly emerging field in recent years. Besides the often mild reaction conditions, visible light offers advantages of spatial and temporal control over chain growth, which makes visible light ideal for functionalization of surfaces and more specifically of nanoscale pores. Current challenges in nanopore functionalization include, in particular, local and highly controlled polymer functionalizations. Using spatially limited light sources such as lasers or near field modes for light-induced polymer functionalization is envisioned to allow local functionalization of nanopores and thereby improve nanoporous material performance. These light sources are usually providing visible light while classical photopolymerizations are mostly based on UV-irradiation. In this review, we highlight developments in visible light induced polymerizations and especially in visible light induced controlled polymerizations as well as their potential for nanopore functionalization. Existing examples of visible light induced polymerizations in nanopores are emphasized.

Mechanistic Insights into Molecular Crystalline Organometallic Heterogeneous Catalysis through Parahydrogen-Based Nuclear Magnetic Resonance Studies

The heterogeneous solid-gas reactions of crystals of [Rh(L₂)(propene)][BAr^F₄] (1, L₂ = ^tBu₂PCH₂CH₂P^tBu₂) with H₂ and propene, 1-butene, propyne, or 1-butyne are explored by gas-phase nuclear magnetic resonance (NMR) spectroscopy under batch conditions at 25 °C. The temporal evolution of the resulting parahydrogen-induced polarization (PHIP) effects measures catalytic flux and thus interrogates the efficiency of catalytic pairwise para-H₂ transfer, speciation changes in the crystalline catalyst at the molecular level, and allows for high-quality single-scan ¹H, ¹³C NMR gas-phase spectra for the products to be obtained, as well as 2D-measurements. Complex 1 reacts with H₂ to form dimeric [Rh(L₂)(H)(μ-H)]₂[BAr^F₄]₂ (4), as probed using EXAFS; meanwhile, a single-crystal of 1 equilibrates NMR silent para-H₂ with its NMR active ortho isomer, contemporaneously converting into 4, and 1 and 4 each convert para-H₂ into ortho-H₂ at different rates. Hydrogenation of propene using 1 and para-H₂ results in very high initial polarization levels in propane (>85%). Strong PHIP was also detected in the hydrogenation products of 1-butene, propyne, and 1-butyne. With propyne, a competing cyclotrimerization deactivation process occurs to afford [Rh(^tBu₂PCH₂CH₂P^tBu₂)(1,3,4-Me₃C₆H₃)][BAr^F₄], while with 1-butyne, rapid isomerization of 1-butyne occurs to give a butadiene complex, which then reacts with H₂ more slowly to form catalytically active 4. Surprisingly, the high PHIP hydrogenation efficiencies allow hyperpolarization effects to be seen when H₂ is taken directly from a regular cylinder at 25 °C. Finally, changing the chelating phosphine to Cy₂PCH₂CH₂PCy₂ results in initial high polarization efficiencies for propene hydrogenation, but rapid quenching of the catalyst competes to form the zwitterion [Rh(Cy₂PCH₂CH₂PCy₂){η⁶-(CF₃)₂(C₆H₃)}BAr^F₃].

Design strategies, surface functionalization, and environmental remediation potentialities of polymer-functionalized nanocomposites

Inorganic nanoparticles (NPs) have a tunable shape, size, surface morphology, and unique physical properties like catalytic, magnetic, electronic, and optical capabilities. Unlike inorganic nanomaterials, organic polymers exhibit excellent stability, biocompatibility, and processability with a tailored response to external stimuli, including pH, heat, light, and degradation properties. Nano-sized assemblies derived from inorganic and polymeric NPs are combined in a functionalized composite form to import high strength and synergistically promising features not reflected in their part as a single constituent. These new properties of polymer/inorganic functionalized materials have led to emerging applications in a variety of fields, such as environmental remediation, drug delivery, and imaging. This review spotlights recent advances in the design and construction of polymer/inorganic functionalized materials with improved attributes compared to single inorganic and polymeric materials for environmental sustainability. Following an introduction, a comprehensive review of the design and potential applications of polymer/inorganic materials for removing organic pollutants and heavy metals from wastewater is presented. We have offered valuable suggestions for piloting, and scaling-up polymer functionalized nanomaterials using simple concepts. This review is wrapped up with a discussion of perspectives on future research in the field.

An atomistic view on the uptake of aromatic compounds by cyclodextrin immobilized on mesoporous silica

The effect of immobilized $$\upbeta$$ β -cyclodextrin (bCD) molecules inside a mesoporous silica support on the uptake of benzene and p-nitrophenol from aqueous solution was investigated using all-atom molecular dynamics (MD) simulations. The calculated adsorption isotherms are discussed with respect to the free energies of binding for a 1:1 complex of bCD and the aromatic guest molecule. The adsorption capacity of the bCD-containing material significantly exceeds the amount corresponding to a 1:1 binding scenario, in agreement with experimental observations. Beside the formation of 1:2 and, to a lesser extent, 1:3 host:guest complexes, also host–host interactions on the surface as well as more unspecific host–guest interactions govern the adsorption process. The demonstrated feasibility of classical all-atom MD simulations to calculate liquid phase adsorption isotherms paves the way to a molecular interpretation of experimental data that are too complex to be described by empirical models.

Tying Covalent Organic Frameworks through Alkene Metathesis and Supported Platinum as Efficient Catalysts for Hydrosilylation

Recently there has been a great interest in covalent organic frameworks due to their fascinating properties. Current approaches to improve their hydrolytic stability mainly rely on the transformation of the dynamic bonds into strong and irreversible bonds, but these approaches also reduce the versatility of the frameworks. Herein, we would like to demonstrate a solution to this dilemma by forming hierarchical bonds through olefin metathesis to produce highly stable COFs. Our approach allows unprecedented opportunities for post-modification of the inner space through the dynamic imine bonds while maintaining the integrity of the framework. Specifically, we demonstrate an amorphous-to-crystalline transformation. In addition, the porosity can be enhanced by up to 70% after full removal of the amine subunits. Overall, our work provides a new direction for the generation of highly stable while still versatile COFs. Meanwhile, platinum(II) complexes can be supported on BHU-2 (Pt@BHU-2) or BHU-2-Oxidate(Pt@BHU-2-Oxidate) as efficient catalysts for hydrosilylation.

Polycondensation in confined nanopores toward the selective formation of narrowly dispersed linear polyesters

While the synthesis of linear polymers with both ends conserved is severely impeded due to the inevitable macrocyclization in step-growth polymerization, this work provides a new idea to mainly formation of linear polymer chains.

Olefin Metathesis in Confinement: Towards Covalent Organic Framework Scaffolds for Increased Macrocyclization Selectivity

Covalent organic frameworks (COFs) offer vast structural and chemical diversity enabling a wide and growing range of applications. While COFs are well‐established as heterogeneous catalysts, so far, their high and ordered porosity has scarcely been utilized to its full potential when it comes to spatially confined reactions in COF pores to alter the outcome of reactions. Here, we present a highly porous and crystalline, large‐pore COF as catalytic support in α,ω‐diene ring‐closing metathesis reactions, leading to increased macrocyclization selectivity. COF pore‐wall modification by immobilization of a Grubbs‐Hoveyda‐type catalyst via a mild silylation reaction provides a molecularly precise heterogeneous olefin metathesis catalyst. An increased macro(mono)cyclization (MMC) selectivity over oligomerization (O) for the heterogeneous COF‐catalyst (MMC:O=1.35) of up to 51 % compared to the homogeneous catalyst (MMC:O=0.90) was observed along with a substrate‐size dependency in selectivity, pointing to diffusion limitations induced by the pore confinement.

Quantitative Distinction between Noble Metals Located in Mesopores from Those on the External Surface

We compare three methods for quantitatively distinguishing the location of noble metal (NM) particles in mesopores from those found on the external support surface. MCM‐41 and SBA‐15 with NM located in mesopores or on the external surface were prepared and characterized by TEM. ³¹P MAS NMR spectroscopy was used to quantify arylphosphines in complexes with NM. Phosphine/NM ratios drop from 2.0 to 0.2 when increasing the probe diameter from 1.08 to 1.54 nm. The reaction between NM and triphenylphosphine (TPP) within 3.0 nm MCM‐41 pores takes due to confinement effects multiple weeks. In contrast, external NM react with TPP instantly. A promising method is filling the pores by using the pore volume impregnation technique with tetraethylorthosilicate (TEOS). TPP loading revealed that 66 % of NMs are located on the external surface of MCM‐41. The pore filling method can be used in association with any probe molecule, also for the quantification of acid sites.

Influence of the Template Removal Method on the Mechanical Stability of SBA-15

Removing the template from the pores after the polycondensation of the silica precursor is a necessary step in the synthesis of mesoporous silica materials. In our previous work, we developed a method for the efficient and spatially controlled functionalization of SBA-15. First, the silanol groups on the particle surface and in the pore entrances were passivated. After extraction of the template, a pretreatment step in N2 converted the silanol groups to the single and geminal state. Afterwards, an azide functionality was introduced exclusively into the mesopores. This ensured that the catalyst could afterwards be immobilized unambiguously in the mesopores. The mechanical stability of a material functionalized in such a spatially controlled manner is studied and compared to other template removal methods. Even though several studies investigated the influence of the calcination temperature, the presence or the absence of oxygen during the template removal, the specific conditions used during the herein reported selective functionalization procedure have not been covered yet.

Rh(I)/(III)-N-Heterocyclic Carbene Complexes: Effect of Steric Confinement Upon Immobilization on Regio- and Stereoselectivity in the Hydrosilylation of Alkynes

Rh(I) NHC and Rh(III) Cp* NHC complexes (Cp*=pentamethylcyclopentadienyl, NHC=N-heterocyclic carbene=pyrid-2-ylimidazol-2-ylidene (Py-Im), thiophen-2-ylimidazol-2-ylidene) are presented. Selected catalysts were selectively immobilized inside the mesopores of SBA-15 with average pore diameters of 5.0 and 6.2 nm. Together with their homogenous progenitors, the immobilized catalysts were used in the hydrosilylation of terminal alkynes. For aromatic alkynes, both the neutral and cationic Rh(I) complexes showed excellent reactivity with exclusive formation of the β(E)-isomer. For aliphatic alkynes, however, selectivity of the Rh(I) complexes was low. By contrast, the neutral and cationic Rh(III) Cp* NHC complexes proved to be highly regio- and stereoselective catalysts, allowing for the formation of the thermodynamically less stable β-(Z)-vinylsilane isomers at room temperature. Notably, the SBA-15 immobilized Rh(I) catalysts, in which the pore walls provide an additional confinement, showed excellent β-(Z)-selectivity in the hydrosilylation of aliphatic alkynes, too. Also, in the case of 4-aminophenylacetylene, selective formation of the β(Z)-isomer was observed with a neutral SBA-15 supported Rh(III) Cp* NHC complex but not with its homogenous counterpart. These are the first examples of high β(Z)-selectivity in the hydrosilylation of alkynes by confinement generated upon immobilization inside mesoporous silica.

Mechanisms and Intermediates in the True Liquid Crystal Templating Synthesis of Mesoporous Silica Materials

Mesoporous silica materials (MSMs) produced by true liquid crystal templating (TLCT) are often considered as direct inverted replicas of the initial lyotropic liquid crystal (LLC) phase. However, the predictive design of tailor-made MSMs requires the full knowledge of the TLCT process, which is still incomplete. Here, we tackle this issue by monitoring the structural evolution during the templating process by small-angle X-ray scattering, showing that after the addition of the silica source the reaction mixture is first isotropic and then an intermediary liquid crystal phase appears, which is the key to the success of the templating process, namely the formation of ordered MSMs. We analyze the structure and the formation dynamics of this intermediary phase and present a simple theoretical model, which allows us to connect the structural parameters of the initial LLC and the MSM. These results provide an enhanced understanding of the TLCT process and are an important step toward the predictable synthesis of new MSMs in the future.

Morphology-transport relationships for SBA-15 and KIT-6 ordered mesoporous silicas

Quantitative morphology-transport relationships are derived for ordered mesoporous silicas through direct numerical simulation of hindered diffusion in realistic geometrical models of the pore space obtained from physical reconstruction by electron tomography. We monitor accessible porosity and effective diffusion coefficients resulting from steric and hydrodynamic interactions between passive tracers and the pore space confinement as a function of λ = d_tracer/d_meso (ratio of tracer diameter to mean mesopore diameter) in SBA-15 (d_meso = 9.1 nm) and KIT-6 (d_meso = 10.5 nm) silica samples. For λ = 0, the pointlike tracers reproduce the true diffusive tortuosities. For 0 ≤λ < 0.5, the derived hindrance factor quantifies the extent to which diffusion of finite-size tracers through the materials is hindered compared with free diffusion in the bulk liquid. The hindrance factor connects the transport properties of the ordered silicas to their mesopore space morphologies and enables quantitative comparison with random mesoporous silicas. Key feature of the ordered silicas is a narrow, symmetric mesopore size distribution (∼10% relative standard deviation), which engenders a sharper decline of the accessible-porosity window with increasing λ than observed for random silicas with their wide, asymmetric mesopore size distributions. As support structures, ordered mesoporous silicas should offer benefits for applications where spatial confinement effects and molecular size-selectivity are of prime importance. On the other hand, random mesoporous silicas enable higher diffusivities for λ > 0.3, because the larger pores carry most of the diffusive flux and keep pathways open when smaller pores have closed off.

Seven confluence principles: a case study of standardized statistical analysis for 26 methods that assign net atomic charges in molecules

This article studies two kinds of information extracted from statistical correlations between methods for assigning net atomic charges (NACs) in molecules. First, relative charge transfer magnitudes are quantified by performing instant least squares fitting (ILSF) on the NACs reported by Cho et al. (ChemPhysChem, 2020, 21, 688–696) across 26 methods applied to ∼2000 molecules. The Hirshfeld and Voronoi deformation density (VDD) methods had the smallest charge transfer magnitudes, while the quantum theory of atoms in molecules (QTAIM) method had the largest charge transfer magnitude. Methods optimized to reproduce the molecular dipole moment (e.g., ACP, ADCH, CM5) have smaller charge transfer magnitudes than methods optimized to reproduce the molecular electrostatic potential (e.g., CHELPG, HLY, MK, RESP). Several methods had charge transfer magnitudes even larger than the electrostatic potential fitting group. Second, confluence between different charge assignment methods is quantified to identify which charge assignment method produces the best NAC values for predicting via linear correlations the results of 20 charge assignment methods having a complete basis set limit across the dataset of ∼2000 molecules. The DDEC6 NACs were the best such predictor of the entire dataset. Seven confluence principles are introduced explaining why confluent quantitative descriptors offer predictive advantages for modeling a broad range of physical properties and target applications. These confluence principles can be applied in various fields of scientific inquiry. A theory is derived showing confluence is better revealed by standardized statistical analysis (e.g., principal components analysis of the correlation matrix and standardized reversible linear regression) than by unstandardized statistical analysis. These confluence principles were used together with other key principles and the scientific method to make assigning atom-in-material properties non-arbitrary. The N@C₆₀ system provides an unambiguous and non-arbitrary falsifiable test of atomic population analysis methods. The HLY, ISA, MK, and RESP methods failed for this material.

Standardized statistical analysis of many methods to assign net atomic charges revealed relative charge transfer magnitudes and confluent correlations.