Efficient Photocatalytic CO2 Reduction by a Ni(II) Complex Having Pyridine Pendants through Capturing a Mg2+ Ion as a Lewis-Acid Cocatalyst

Efficient Visible-Light-Driven Carbon Dioxide Reduction using a Bioinspired Nickel Molecular Catalyst

Inspired by natural enzymes, this study presents a nickel-based molecular catalyst, [Ni‖(N2S2)]Cl2 (NiN2S2, N2S2=2,11-dithia[3,3](2,6)pyridinophane), for the photochemical catalytic reduction of CO2 under visible light. The catalyst was synthesized and characterized using various techniques, including liquid chromatography-high resolution mass spectrometry (LC-HRMS), UV-Visible spectroscopy, and X-ray crystallography. The crystallographic analysis revealed a slightly distorted octahedral coordination geometry with a mononuclear Ni2+ cation, two nitrogen atoms and two sulfur atoms. Photocatalytic CO2 reduction experiments were performed in homogeneous conditions using the catalyst in combination with [Ru(bpy)3]Cl2 (bpy=2,2'-bipyridine) as a photosensitizer and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH) as a sacrificial electron donor. The catalyst achieved a high selectivity of 89 % towards CO and a remarkable turnover number (TON) of 7991 during 8 h of visible light irradiation under CO2 in the presence of phenol as a co-substrate. The turnover frequency (TOF) in the initial 6 h was 1079 h-1, with an apparent quantum yield (AQY) of 1.08 %. Controlled experiments confirmed the dependency on the catalyst, light, and sacrificial electron donor for the CO2 reduction process. These findings demonstrate this bioinspired nickel molecular catalyst could be effective for fast and efficient photochemical catalytic reduction of CO2 to CO.

Earth-abundant Zn-dipyrrin chromophores for efficient CO2 photoreduction

The development of strong sensitizing and Earth-abundant antenna molecules is highly desirable for CO2 reduction through artificial photosynthesis. Herein, a library of Zn-dipyrrin complexes (Z-1-Z-6) are rationally designed via precisely controlling their molecular configuration to optimize strong sensitizing Earth-abundant photosensitizers. Upon visible-light excitation, their special geometry enables intramolecular charge transfer to induce a charge-transfer state, which was first demonstrated to accept electrons from electron donors. The resulting long-lived reduced photosensitizer was confirmed to trigger consecutive intermolecular electron transfers for boosting CO2-to-CO conversion. Remarkably, the Earth-abundant catalytic system with Z-6 and Fe-catalyst exhibits outstanding performance with a turnover number of >20 000 and 29.7% quantum yield, representing excellent catalytic performance among the molecular catalytic systems and highly superior to that of noble-metal photosensitizer Ir(ppy)2(bpy)+ under similar conditions. Experimental and theoretical investigations comprehensively unveil the structure-activity relationship, opening up a new horizon for the development of Earth-abundant strong sensitizing chromophores for boosting artificial photosynthesis.

Appropriation of group II metals: synthesis and characterisation of the first alkaline earth metal supported transition metal carbonite complexes

Nickel carbonite complexes supported by alkaline earth metals have been accessed via salt-metathesis of the corresponding alkali metal precursors. The new complexes undergo Schlenk-like exchange reactions in solution which have been investigated by NMR spectroscopy. Also their reactivity towards epoxides and carbon monoxide was studied.

Bio-inspired bimetallic models for electrochemical CO2 reduction

Inspired by the carbon monoxide dehydrogenase (CODH) active site where two metal ions synergistically catalyze the interconversion between CO2 and CO, we have developed a family of rhenium dipyridine derivatives (1-3), in which potassium 1-aza-18-crown-6-ether (KN18C6) moiety functions as a Lewis acid to assist the CO2 reduction reaction (CO2RR). We found that such design leads to dramatically strong deposition on the electrode under CO2 in the presence of potassium cation, and a clear trend for the deposition rate was observed following the flexibility of linkage between the framework and the KN18C6 moiety; the more flexible, the faster. The origin of deposition was further characterized by a series of control experiments and infrared spectroelectrochemistry (IR-SEC). Unfortunately, the deposition suppresses the subsequent C-O bond cleavage reaction.

Unveiling the role of proton concentration in dinuclear metal complexes for boosting photocatalytic CO2 reduction

The reaction kinetics of photocatalytic CO2 reduction is highly dependent on the transfer rate of electrons and protons to the CO2 molecules adsorbed on catalytic centers. Studies on uncovering the proton effect in catalysts on photocatalytic activity of CO2 reduction are significant but rarely reported. In this paper, we, from the molecular level, revealed that the photocatalytic activity of CO2 reduction is closely related to the proton availability in catalysts. Specifically, four dinuclear Co(II) complexes based on Robson-type ligands with different number of carboxylic groups (-nCOOH; n = 0, 2, 4, 6) were designed and synthesized. All these complexes show photocatalytic activity for CO2 reduction to CO in a water-containing system upon visible-light illumination. Interestingly, the CO yields increase positively with the increase of the carboxylic-group number in dinuclear Co(II) complexes. The one containing -6COOH shows the best photocatalytic activity for CO2 reduction to CO, with the TON value reaching as high as 10,294. The value is 1.8, 3.4, and 7.8 times higher than those containing -4COOH, -2COOH, and -0COOH, respectively. The high TON value also makes the dinuclear Co(II) complex with -6COOH outstanding among reported homogeneous molecular catalysts for photocatalytic CO2 reduction. Control experiments and density functional theory calculation indicated that more carboxylic groups in the catalyst endow the catalyst with more proton relays, thus accelerating the proton transfer and boosting the photocatalytic CO2 reduction. This study, at a molecular level, elucidates that more carboxylic groups in catalysts are beneficial for boosting the reaction kinetics of photocatalytic CO2 reduction.

A reduced polyoxometalate-encapsulated organo cobalt modified phosphate framework for improving photocatalytic reduction of CO2

A reduced polyoxometalate-based organo-metallophosphate (MOPO) framework formulated as [Co4(PO4)(C7H8N4)6](PWVI10WV2O40) (Co-PO4-PW12) with an ultra-high CO production rate of 13 676 μmol g-1 h-1 has been presented through photocatalytic CO2 reduction investigations.

Ligand-Bound CO2 as a Nonclassical Route toward Efficient Photocatalytic CO2 Reduction with a Ni N-Confused Porphyrin

Implementing the synergistic effects between the metal and the ligand has successfully streamlined the energetics for CO2 activation and gained high catalytic activities, establishing the important breakthroughs in photocatalytic CO2 reduction. Herein, we describe a Ni(II) N-confused porphyrin complex (NiNCP) featuring an acidic N-H group. It is readily deprotonated and exists in an anion form during catalysis. Owing to this functional site, NiNCP gave rise to an outstanding turnover number (TON) as high as 217,000 with a 98% selectivity for CO2 reduction to CO, while the parent Ni(II) porphyrin (NiTPP) was found to be nearly inactive. Our mechanistic analysis revealed a nonclassical reaction pattern where CO2 was effectively activated via the attack of the Lewis-basic ligand. The resulting ligand-bound CO2 adduct could be further reduced to produce CO. This new metal-ligand synergistic effect is anticipated to inspire the design of highly active catalysts for small molecule activations.

Mononuclear Iron Pyridinethiolate Complex Promoted CO2 Photoreduction via Rapid Intramolecular Electron Transfer

Designing earth-abundant metal complexes as efficient molecular photocatalysts for visible light-driven CO2 reduction is a key challenge in artificial photosynthesis. Here, we demonstrated the first example of a mononuclear iron pyridine-thiolate complex that functions both as a photosensitizer and catalyst for CO2 reduction. This single-component bifunctional molecular photocatalyst efficiently reduced CO2 to formate and CO with a total turnover number (TON) of 46 and turnover frequency (TOF) of 11.5 h-1 in 4 h under visible light irradiation. Notably, the quantum yield was determined to be 8.4 % for the generation of formate and CO at 400 nm. Quenching experiments indicate that high photocatalytic activity is mainly attributed to the rapid intramolecular quenching protocol. The mechanism investigation by DFT calculation and electrochemical studies revealed that the protonation of Febpy(pyS)2 is indispensable step for photocatalytic CO2 reduction.

Catalytic CO2 Reduction with Heptacoordinated Polypyridine Complexes: Switching the Selectivity via Metal Replacement

The discovery of molecular catalysts for the CO2 reduction reaction (CO2 RR) in the presence of water, which are both effective and selective towards the generation of carbon-based products, is a critical task. Herein we report the catalytic activity towards the CO2 RR in acetonitrile/water mixtures by a cobalt complex and its iron analog both featuring the same redox-active ligand and an unusual seven-coordination environment. Bulk electrolysis experiments show that the cobalt complex mainly yields formate (52 % selectivity at an applied potential of -2.0 V vs Fc+ /Fc and 1 % H2 O) or H2 (up to 86 % selectivity at higher applied bias and water content), while the iron complex always delivers CO as the major product (selectivity >74 %). The different catalytic behavior is further confirmed under photochemical conditions with the [Ru(bpy)3 ]2+ sensitizer (bpy=2,2'-bipyridine) and N,N-diisopropylethylamine as electron donor, where the cobalt complex leads to preferential H2 formation (up to 89 % selectivity), while the iron analog quantitatively generates CO (up to 88 % selectivity). This is ascribed to a preference towards a metal-hydride vs. a metal-carboxyl pathway for the cobalt and the iron complex, respectively, and highlights how metal replacement may effectively impact on the reactivity of transition metal complexes towards solar fuel formation.

Connecting Biological and Synthetic Approaches for Electrocatalytic CO2 Reduction

Electrocatalytic CO2 reduction has developed into a broad field, spanning fundamental studies of enzymatic 'model' catalysts to synthetic molecular catalysts and heterogeneous gas diffusion electrodes producing commercially relevant quantities of product. This diversification has resulted in apparent differences and a disconnect between seemingly related approaches when using different types of catalysts. Enzymes possess discrete and well understood active sites that can perform reactions with high selectivity and activities at their thermodynamic limit. Synthetic small molecule catalysts can be designed with desired active site composition but do not yet display enzyme-like performance. These properties of the biological and small molecule catalysts contrast with heterogeneous materials, which can contain multiple, often poorly understood active sites with distinct reactivity and therefore introducing significant complexity in understanding their activities. As these systems are being better understood and the continuously improving performance of their heterogeneous active sites closes the gap with enzymatic activity, this performance difference between heterogeneous and enzymatic systems begins to close. This convergence removes the barriers between using different types of catalysts and future challenges can be addressed without multiple efforts as a unified picture for the biological-synthetic catalyst spectrum emerges.

A Blueprint for Secondary Coordination Sphere Editing: Approaches Toward Lewis-Acid Assisted Carbon Dioxide Co-Activation

Carbon dioxide (CO2 ) is a potent greenhouse gas of environmental concern. Seeking to offer a solution to the "CO2 -problem", the chemistry community has turned a focus toward transition metal complexes which can activate, reduce, and convert CO2 into carbon-based products. The design of such systems involves judicious selection of both metal and accompanying donor ligand; in part, these efforts are motivated by biological metalloenzymes that undertake similar transformations. As a design element, metal-ligand cooperativity, which leverages intramolecular interactions between a transition metal and an adjacent secondary ligand site, has been acknowledged as a vitally important component by the CO2 activation community. These systems offer a "push-pull" style of activation where electron density is chaperoned onto CO2 with an accompanying electrophile, such as a Lewis-acid, playing the role of acceptor. This pairing allows for the stabilization of reactive Cx Hy Oz -containing intermediates and can bias CO2 product selectivity. In the laboratory, chemists can test hypotheses and ideas, enabling rationalization of why a given pairing of transition metal/Lewis-acid leads to selective CO2 reduction outcomes. This Concept identifies literature examples and highlights key design properties, allowing interested contributors to design, create, and implement novel systems for productive transformations of a small molecule (CO2 ) with huge potential impact.

Overall reaction mechanism of photocatalytic CO2 reduction on a Re(i)-complex catalyst unit of a Ru(ii)-Re(i) supramolecular photocatalyst

Rhenium(i) complexes fac-[ReI(diimine)(CO)3(L)]n+ are mostly used and evaluated as photocatalysts and catalysts in both photochemical and electrochemical systems for CO2 reduction. However, the selective reduction mechanism of CO2 to CO is unclear, although numerous mechanistic studies have been reported. A Ru(ii)-Re(i) supramolecular photocatalyst with fac-[ReI(diimine)(CO)3{OC(O)OCH2CH2NR2}] (R = C2H4OH) as a catalyst unit (RuC2Re) exhibits very high efficiency, selectivity, and durability of CO formation in photocatalytic CO2 reduction reactions. In this work, the reaction mechanism of photocatalytic CO2 reduction using RuC2Re is fully clarified. Time-resolved IR (TR-IR) measurements using rapid-scan FT-IR spectroscopy with laser flash photolysis verify the formation of RuC2Re(COOH) with a carboxylic acid unit, i.e., fac-[ReI(diimine)(CO)3(COOH)], in the photocatalytic reaction solution. Additionally, this important intermediate is detected in an actual photocatalytic reaction using steady state irradiation. Kinetics analysis of the TR-IR spectra and DFT calculations demonstrated the reaction mechanism of the conversion of the one-electron reduced species of RuC2Re with a fac-[ReI(diimine˙-)(CO)3{OC(O)OCH2CH2NR2}]- unit, which was produced via the photochemical reduction of RuC2Re by 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH), to RuC2Re(COOH). The kinetics of the recovery processes of the starting complex RuC2Re from RuC2Re(COOH) accompanying the release of CO and OH- was also clarified. As a side reaction of RuC2Re(COOH), a long-lived carboxylate-ester complex with a fac-[ReI(diimine)(CO)3(COOC2H4NR2)] unit, which was produced by the nucleophilic attack of TEOA to one of the carbonyl ligands of RuC2Re(CO) with a fac-[ReI(diimine)(CO)4]+ unit, was formed during the photocatalytic reaction. This complex works not only as a precursor in another minor CO formation process but also as an external photosensitiser that photochemically reduces the other complexes i.e., RuC2Re, RuC2Re(COOH), and the intermediate that is reductively converted to RuC2Re(COOH).

Molecular Co-Catalyst Confined within a Metallacage for Enhanced Photocatalytic CO2 Reduction

The construction of structurally well-defined supramolecular hosts to accommodate catalytically active species within a cavity is a promising way to address catalyst deactivation. The resulting supramolecular catalysts can significantly improve the utilization of catalytic sites, thereby achieving a highly efficient chemical conversion. In this study, the Co-metalated phthalocyanine (Pc-Co) was successfully confined within a tetragonal prismatic metallacage, leading to the formation of a distinctive type of supramolecular photocatalyst (Pc-Co@Cage). The host-guest architecture of Pc-Co@Cage was unambiguously elucidated by single-crystal X-ray diffraction (SCXRD), NMR, and ESI-TOF-MS, revealing that the single cobalt active site can be thoroughly isolated within the space-restricted microenvironment. In addition, we found that Pc-Co@Cage can serve as a homogeneous supramolecular photocatalyst that displays high CO2 to CO conversion in aqueous media under visible light irradiation. This supramolecular photocatalyst exhibits an obvious improvement in activity (TONCO = 4175) and selectivity (SelCO = 92%) relative to the nonconfined Pc-Co catalyst (TONCO = 500, SelCO = 54%). The present strategy provided a rare example for the construction of a highly active, selective, and stable photocatalyst for CO2 reduction through a cavity-confined molecular catalyst within a discrete metallacage.

Mechanistic insights of electrocatalytic CO2 reduction by Mn complexes: synergistic effects of the ligands

The electrocatalytic mechanisms of CO2 reduction catalyzed by pyridine-oxazoline (pyrox)-based Mn catalysts were investigated by DFT calculations. In-depth comparative analyses of pyrox-based and bipyridine-based Mn complexes were carried out. C-OH cleavage is the rate-determining step for both the protonation-first path and the reduction-first path. The free energy of CO2 activation (ΔG1) and the electrons donated by CO ligands in this step are effective descriptors in regulating the C-OH cleavage barrier. The reduction of carboxylate complex 6 (E6) is the potential-determining step for the reduction-first path. Meanwhile, for the protonation-first path, the initial generation (E2) or the regeneration (E8) of active catalyst might be potential-determining. Hirshfeld charge and orbital contribution analysis indicate that E6 is definitely based on the heterocyclic ligand and E2 is related to both the heterocyclic ligand and three CO ligands. Therefore, replacement of the CO ligand by a stronger electron donating ligand can effectively boost the catalytic activity of CO2 reduction without increasing the overpotential in the reduction-first path. This hypothesis is supported by the mechanism calculations of the Mn complex in which the axial CO ligand is replaced by a pyridine or PMe3.

Influence of a neighbouring Cu centre on electro- and photocatalytic CO2 reduction by Fe-Mabiq

Electrocatalytic and photocatalytic CO2 reduction by a heterobimetallic Cu/Fe-Mabiq complex were examined and compared to the monometallic [Fe(Mabiq)]+. The neighbouring Cu-Xantphos unit leads to marked changes in the electrocatalytic mechanism and enhanced photocatalytic performance.

Mechanism of photocatalytic CO2 reduction to HCO2H by a robust multifunctional iridium complex

The tetradentate PNNP-type IrIII complex Mes-IrPCY2 ([Cl-IrIII-H]+) is reported to be an efficient catalyst for the reduction of CO2 to formate with excellent selectivity under visible light irradiation. Density functional calculations have been carried out to elucidate the mechanism and the origin of selectivity in the present work. Calculations suggest that the double-reduced complex 1-H (1[IrI-H]0) demonstrates higher activity than the single-reduced complex 2-H (2[IrIII(L˙-)-H]+), possibly owing to the higher hydride donor ability of the former compared to the latter; thus 1-H functions as the active species in the overall CO2 reduction reaction. In the HCOO- formation pathway, the hydride of 1-H performs a nucleophilic attack on CO2via an outer-sphere fashion to generate species 1-OCHO (1[IrI-OCHO]0), which then releases HCOO- to produce an IrI intermediate. A subsequent protonation and chloride coordination of the Ir center leads to the regeneration of catalyst 1[Cl-IrIII-H]+. For the CO production, a nucleophilic attack on CO2 takes place by the Ir atom of 1-Hvia an inner-sphere manner to afford complex O2C-3-H (1[O2C-IrIII-H]0), followed by a two-proton-one-electron reduction to furnish the OC-2-H complex (2[OC-IrIII(L˙-)-H]+) after liberating a H2O. Ultimately, CO is released to form 2-H. The stronger nucleophilicity as well as smaller steric hindrance of the hydride than the Ir atom of the active species 1-H (1[IrI-H]0) is found to account for the favoring of formate formation over CO formation. Meanwhile, the CO2 reduction reaction is calculated to be preferred over the hydrogen evolution reaction, and this is consistent with the experimental product distributions.

Redox-Active Ligand Assisted Multielectron Catalysis: A Case of Electrocatalyzed CO2-to-CO Conversion

The selective reduction of carbon dioxide remains a significant challenge due to the complex multielectron/proton transfer process, which results in a high kinetic barrier and the production of diverse products. Inspired by the electrostatic and H-bonding interactions observed in the second sphere of the [NiFe]-CODH enzyme, researchers have extensively explored these interactions to regulate proton transfer, stabilize intermediates, and ultimately improve the performance of catalytic CO2 reduction. In this work, a series of cobalt(II) tetraphenylporphyrins with varying numbers of redox-active nitro groups were synthesized and evaluated as CO2 reduction electrocatalysts. Analyses of the redox properties of these complexes revealed a consistent relationship between the number of nitro groups and the corresponding accepted electron number of the ligand at -1.59 V vs. Fc+/0. Among the catalysts tested, TNPPCo with four nitro groups exhibited the most efficient catalytic activity with a turnover frequency of 4.9 × 104 s-1 and a catalytic onset potential 820 mV more positive than that of the parent TPPCo. Furthermore, the turnover frequencies of the catalysts increased with a higher number of nitro groups. These results demonstrate the promising design strategy of incorporating multielectron redox-active ligands into CO2 reduction catalysts to enhance catalytic performance.

Visible-Light-Driven CO2 Reduction with Homobimetallic Complexes. Cooperativity between Metals and Activation of Different Pathways

Visible-light-driven reduction of CO2 to both CO and formate (HCOO-) was achieved in acetonitrile solutions using a homobimetallic Cu bisquaterpyridine complex. In the presence of a weak acid (water) as coreactant, the reaction rate was enhanced, and a total of ca. 766 TON (turnover number) was reached for the CO2 reduction, with 60% selectivity for formate and 28% selectivity for CO, using Ru(phen)32+ as a sensitizer and amines as sacrificial electron donors. Mechanistic studies revealed that with the help of cooperativity between two Cu centers, a bridging hydride is generated in the presence of a proton source (water) and further reacts with CO2 to give HCOO-. A second product, CO, was also produced in a parallel competitive pathway upon direct coordination of CO2 to the reduced complex. Mechanistic studies further allowed comparison of the observed reactivity to the monometallic Cu quaterpyridine complex, which only produced CO, and to the related homobimetallic Co bisquaterpyridine complex, that has been previously shown to generate formate following a mechanism not involving the formation of an intermediate hydride species.

Relative Local Electron Density Tuning in Metal-Covalent Organic Frameworks for Boosting CO2 Photoreduction

The high local electron density and efficient charge carrier separation are two important factors to affect photocatalytic activity, especially for the CO2 photoreduction reaction. However, the systematic studies on the structure-functional relationship regarding the above two factors based on precisely structure model are rarely reported. Herein, as a proof-of-concept, we developed a new strategy on the evaluation of local electron density by controlling the relative electron-deficient (ED) and electron-rich (ER) intensity of monomer at a molecular level based on three rational-designed vinylene-linked sp2 carbon-covalent organic frameworks (COFs). As expected, the as-prepared vinylene-linked sp2 carbon-conjugated metal-covalent organic framework (MCOFs) (VL-MCOF-1) with molecular junction exhibited excellent activities for CO2 -to-HCOOH conversion (283.41 μmol g-1  h-1 ) and high selectivity of 97.1 %, much higher than the VL-MCOF-2 and g-C34 N6 -COF, which is due to the synergistic effect of the multi-electronic metal clusters (Cu3 (PyCA)3 ) (PyCA=pyrazolate-4-carboxaldehyde) as strong ER roles and cyanopyridine units as ED roles and active sites, as well as the boosted photo-induced charge separation efficiency of vinyl connection and increased light utilization ability. These results not only provide a strategy for regulating the electron-density distribution of photocatalysts at the molecular level but also offers profound insights for metal clusters-based COFs to effective CO2 conversion.

Self-Photosensitizing Dinuclear Ruthenium Catalyst for CO2 Reduction to CO

The promise of artificial photosynthesis to solve environmental and energy issues such as global warming and the depletion of fossil fuels has inspired intensive research into photocatalytic systems for CO2 reduction to produce value-added chemicals such as CO and CH3OH. Among the photocatalytic systems for CO2 reduction, self-photosensitizing catalysts, bearing the functions of both photosensitization and catalysis, have attracted considerable attention recently, as such catalysts do not depend on the efficiency of electron transfer from the photosensitizer to the catalyst. Here, we have synthesized and characterized a dinuclear RuII complex bearing two molecules of a tripodal hexadentate ligand as chelating and linking ligands by X-ray crystallography to establish the structure explicitly and have used various spectroscopic and electrochemical methods to elucidate the photoredox characteristics. The dinuclear complex has been revealed to act as a self-photosensitizing catalyst, which acts not only as a photosensitizer but also as a catalyst for CO2 reduction. The dinuclear RuII complex is highly durable and performs efficient and selective CO2 reduction to produce CO with a turnover number of 2400 for 26 h. The quantum yield of the CO formation is also very high─19.7%─and the catalysis is efficient, even at a low concentration (∼1.5%) of CO2.

A Molecular Z-Scheme Artificial Photosynthetic System Under the Bias-Free Condition for CO2 Reduction Coupled with Two-electron Water Oxidation: Photocatalytic Production of CO/HCOOH and H2 O2

Bio-inspired molecular-engineered systems have been extensively investigated for the half-reactions of H2 O oxidation or CO2 reduction with sacrificial electron donors/acceptors. However, there has yet to be reported a device for dye-sensitized molecular photoanodes coupled with molecular photocathodes in an aqueous solution without the use of sacrificial reagents. Herein, we will report the integration of SnIV - or AlIII -tetrapyridylporphyrin (SnTPyP or AlTPyP) decorated tin oxide particles (SnTPyP/SnO2 or AlTPyP/SnO2 ) photoanode with the dye-sensitized molecular photocathode on nickel oxide particles containing [Ru(diimine)3 ]2+ as the light-harvesting unit and [Ru(diimine)(CO)2 Cl2 ] as the catalyst unit covalently connected and fixed within poly-pyrrole layer (RuCAT-RuC2 -PolyPyr-PRu/NiO). The simultaneous irradiation of the two photoelectrodes with visible light resulted in H2 O2 on the anode and CO, HCOOH, and H2 on the cathode with high Faradaic efficiencies in purely aqueous conditions without any applied bias is the first example of artificial photosynthesis with only two-electron redox reactions.

Lewis Acids and Electron-Withdrawing Ligands Accelerate CO Coordination to Dinuclear CuI Compounds

A series of dinuclear molecular copper complexes were prepared and used to model the binding and Lewis acid stabilization of CO in heterogeneous copper CO₂ reduction electrocatalysts. Experimental studies (including measurement of rate and equilibrium constants) and electronic structure calculations suggest that the key kinetic barrier for CO binding may be a σ-interaction between Cu^I and the incoming CO ligand. The rate of CO coordination can be increased upon the addition of Lewis acids or electron-withdrawing substituents on the ligand backbone. Conversely, K_eq for CO coordination can be increased by adding electron density to the metal centers of the compound, consistent with stronger π-backbonding. Finally, the electrochemically measured kinetic results were mapped onto an electrochemical zone diagram to illustrate how these system changes enabled access to each zone.

Photocatalytic CO2 reduction with aminoanthraquinone organic dyes

The direct utilization of solar energy to convert CO₂ into renewable chemicals remains a challenge. One essential difficulty is the development of efficient and inexpensive light-absorbers. Here we show a series of aminoanthraquinone organic dyes to promote the efficiency for visible light-driven CO₂ reduction to CO when coupled with an Fe porphyrin catalyst. Importantly, high turnover numbers can be obtained for both the photosensitizer and the catalyst, which has not been achieved in current light-driven systems. Structure-function study performed with substituents having distinct electronic effects reveals that the built-in donor-acceptor property of the photosensitizer significantly promotes the photocatalytic activity. We anticipate this study gives insight into the continued development of advanced photocatalysts for solar energy conversion.

Highly Efficient Visible-Light-Driven CO2-to-CO Conversion by Coordinatively Unsaturated Co-Salen Complexes in a Water-Containing System

The development of cost-effective catalysts for CO₂ reduction is highly desired but remains a significant challenge. The unsaturated coordination metal center in a catalyst is favorable for the process of catalytic CO₂ reduction. In this paper, two asymmetric salen ligands were used to synthesize two coordinatively unsaturated Co-salen complexes. The two Co-salen complexes exhibit an unsaturated coordination pattern and display high activity and CO selectivity for visible-light-driven CO₂ reduction in a water-containing system. The photocatalytic performance of 2 is higher than that of 1 because the reduction potential of the catalytic Co^II center and the energy barrier of the catalytic transition states of 2 are lower than those of 1, with turnover numbers (TON_CO), turnover frequencies (TOF), and CO selectivity values of 8640, 0.24 s^-1, and 97% for 2, respectively. The photocatalytic reduction of CO₂ to CO for 2 is well supported by control experiments and density functional theory (DFT) calculations.

Advancements and Challenges in Reductive Conversion of Carbon Dioxide via Thermo-/Photocatalysis

Carbon dioxide (CO₂) is the major greenhouse gas and also an abundant and renewable carbon resource. Therefore, its chemical conversion and utilization are of great attraction for sustainable development. Especially, reductive conversion of CO₂ with energy input has become a current hotspot due to its ability to access fuels and various important chemicals. Nowadays, the controllable CO₂ hydrogenation to formic acid and alcohols using sustainable H₂ resources has been regarded as an appealing solution to hydrogen storage and CO₂ accumulation. In addition, photocatalytic CO₂ reduction to CO also provides a potential way to utilize this greenhouse gas efficiently. Besides direct CO₂ hydrogenation, CO₂ reductive functionalization integrates CO₂ reduction with subsequent C-X (X = N, S, C, O) bond formation and indirect transformation strategies, enlarging the diverse products derived from CO₂ and promoting CO₂ reductive conversion into a new stage. In this Perspective, the progress and challenges of CO₂ reductive conversion, including hydrogenation, reductive functionalization, photocatalytic reduction, and photocatalytic reductive functionalization are summarized and discussed along with the key issues and future trends/directions in this field. We hope this Perspective can evoke intense interest and inspire much innovation in the promise of CO₂ valorization.

Dual electronic effects achieving a high-performance Ni(II) pincer catalyst for CO2 photoreduction in a noble-metal-free system

A carbazolide-bis(NHC) Ni^II catalyst (1; NHC, N-heterocyclic carbene) for selective CO₂ photoreduction was designed herein by a one-stone-two-birds strategy. The extended π-conjugation and the strong σ/π electron-donation characteristics (two birds) of the carbazolide fragment (one stone) lead to significantly enhanced activity for photoreduction of CO₂ to CO. The turnover number (TON) and turnover frequency (TOF) of 1 were ninefold and eightfold higher than those of the reported pyridinol-bis(NHC) Ni^II complex at the same catalyst concentration using an identical Ir photosensitizer, respectively, with a selectivity of ∼100%. More importantly, an organic dye was applied to displace the Ir photosensitizer to develop a noble-metal-free photocatalytic system, which maintained excellent performance and obtained an outstanding quantum yield of 11.2%. Detailed investigations combining experimental and computational studies revealed the catalytic mechanism, which highlights the potential of the one-stone-two-birds effect.

Highly Robust Rhenium(I) Bipyridyl Complexes Containing Dipyrromethene-BF2 Chromophores for Visible Light-Driven CO2 Reduction

New rhenium bipyridyl complexes with dipyrromethene-BF₂ chromophores (A-ReBDP-CZ, A-ReBDP₂ , ReBDP-CZ, and ReBDP₂ ) were developed for highly efficient photocatalytic carbon dioxide (CO₂ ) reduction to carbon monoxide (CO). These catalysts consisted of two moderate electron-deficient groups (dipyrromethene-BF₂ , BDP) as the visible-light-harvesting antenna as well as both electron donor (N-phenylcarbazole, CZ) and acceptor (BDP) on Re bipyridyl framework. Among ReBDP-CZ and ReBDP₂ complexes, the ReBDP₂ incorporating two electron-deficient BDP chromophores had a longer-lived photoexcited state (182.4 μs) and a twofold enhanced molar absorption coefficient (ϵ=157000 m^-1  cm^-1 ) compared with ReBDP-CZ. Thus, ReBDP₂ achieved the superior photocatalytic reactivity and stability with a CO turnover number (TON_CO ) value as high as 1323 and quantum yield (Φ_CO ) up to 55 %, which was the most excellent photocatalysis efficiency among the single-active-site Re catalysts without additional photosensitizer. Furthermore, the acetylene-bridged linker was detrimental to the photoactivity and durability of the catalyst. In brief, two BDP-based Re bipyridyl systems with outstanding catalytic performance and significant visible-light-harvesting capabilities in the solar spectrum offer a promising strategy for solar-to-fuel conversion schemes.

Co-facial π-π Interaction Expedites Sensitizer-to-Catalyst Electron Transfer for High-Performance CO2 Photoreduction

The sunlight-driven reduction of CO₂ into carbonaceous fuels can lower the atmospheric CO₂ concentration and provide renewable energy simultaneously, attracting scientists to design photocatalytic systems for facilitating this process. Significant progress has been made in designing high-performance photosensitizers and catalysts in this regard, and further improvement can be realized by installing additional interactions between the abovementioned two components, however, the design strategies and mechanistic investigations on such interactions remain challenging. Here, we present the construction of molecular models for intermolecular π-π interactions between the photosensitizer and the catalyst, via the introduction of pyrene groups into both molecular components. The presence, types, and strengths of diverse π-π interactions, as well as their roles in the photocatalytic mechanism, have been examined by ¹H NMR titration, fluorescence quenching measurements, transient absorption spectroscopy, and quantum chemical simulations. We have also explored the rare dual emission behavior of the pyrene-appended iridium photosensitizer, of which the excited state can deliver the photo-excited electron to the pyrene-decorated cobalt catalyst at a fast rate of 2.60 × 10⁶ s^-1 via co-facial π-π interaction, enabling a remarkable apparent quantum efficiency of 14.3 ± 0.8% at 425 nm and a high selectivity of 98% for the photocatalytic CO₂-to-CO conversion. This research demonstrates non-covalent interaction construction as an effective strategy to achieve rapid CO₂ photoreduction besides a conventional photosensitizer/catalyst design.

Exploiting consecutive photoinduced electron transfer (ConPET) in CO2 photoreduction

The consecutive photoinduced electron transfer (ConPET) process of 1,2,3,5-Tetrakis(carbazol-9-yl)-4,6-dicyanobenzene (4CzIPN) in CO₂ photoreduction to achieve powerful reducing species has been disclosed by activating a bis(terpyridine)ruthenium(II) complex bearing a high overpotential for selective light-driven reduction of CO₂ to CO in homogeneous solution.

Utilization of Low-Concentration CO2 with Molecular Catalysts Assisted by CO2-Capturing Ability of Catalysts, Additives, or Reaction Media

Increasing concentration of atmospheric CO₂ is a worldwide concern and continues to trigger various environmental problems. Photo- or electrocatalytic CO₂ reduction (CO₂-Red) using solar energy, i.e., artificial photosynthesis, is a prospective technique owing to its sustainability and the usefulness of the reaction products. Concentrations of CO₂ in exhaust gases from industries are several % to 20%, and that in the atmosphere is about 400 ppm. Although condensation processes of CO₂ require high energy consumption and cost, pure CO₂ has been used in most of the reported studies for photo- and electrocatalytic CO₂-Red because the reaction between CO₂ and the catalyst could be one of the rate-limiting steps. To address these issues and provide a repository of potential techniques for other researchers, this perspective summarizes the catalytic systems reported for the reduction of low-concentration CO₂, which utilize a combination of catalytic CO₂-Red and CO₂-capturing reactions (or CO₂ adsorption). First, we describe CO₂ insertions into M-X bonds of the catalysts, which increase the rate constants and/or equilibrium constants for CO₂ binding on the catalysts, and modifications of the second coordination sphere to stabilize the CO₂-bound catalysts. Furthermore, we discuss the reaction media used for catalytic CO₂-Red that have the unique effect of increasing CO₂ concentrations around the catalysts. These reaction media include typical CO₂-capturing additives, ionic liquids, and metal-organic frameworks.

Combination of Organic Dye and Iron for CO2 Reduction with Pentanuclear Fe2Na3 Purpurin Photocatalysts

Molecular photocatalysts designed with earth-abundant elements are rare and challenging in artificial photosynthesis study. Herein, we report a multimetallic Fe2Na3 purpurin (1) complex for the reduction of CO2 in DMF under visible-light irradiation. The photocatalytic system achieves 91% selectivity and 2625 ± 334 turnovers of CO in 120 h, which is among the highest reported for a noble-metal-free catalyst without an additional photosensitizer. UV-vis and electrochemical studies suggest that the mechanism involves subsequent reductions and protonations of 1 to generate [FeII2Na3((H)2PP)6]5- and [FeIII2Na3((H)2PP)6]3- as the active photocatalysts in CO2 reduction.

Ordered heterogeneity of molecular photosensitizer toward enhanced photocatalysis

The photosensitizer is one of the important components in the photocatalytic system. Molecular photosensitizers have well-defined structures, which is beneficial in revealing the catalysis mechanism and helpful for further structural design and performance optimization. However, separation and recycling of the molecular photosensitizers is a great problem. Loading them into/on two/three-dimensional supports through covalent bonds, electrostatic interactions, and supramolecular interactions is a method that enhances their separation and recycling capability. Nonetheless, the structures of the resulting composites are unclear. Thus, the development of highly crystalline heterogeneity methods for molecular photosensitizers, albeit greatly challenging, is meaningful and desirable in photocatalysis, through which heterogeneous photosensitizers with well-defined structures, definite catalysis mechanisms, and good catalytic performance would be expected.

Ordered heterogeneity is significant for molecular photosensitizers to enhance their practical applications. However, the ordered heterogeneity of molecular photosensitizers is still a great challenge. In this article, we describe a supramolecular assembly method for the heterogeneity of molecular photosensitizers, with which a mononuclear Zn(II) molecular photosensitizer in solution was orderly assembled in long range via π–π stacking interactions, affording a cheap, solid photocatalyst (π-1) with a porous structure. With Co(II), Fe(III), or Ni(II) as a cocatalyst, π-1 shows noticeably better photocatalytic activity for CO₂ reduction than in a homogeneous system. The definite crystal structure and precise position of the catalytic center in π-1 were determined by single-crystal X-ray diffraction combined with X-ray diffraction adsorption spectra, based on which the enhanced activity of π-1 for photocatalytic CO₂ reduction was revealed by theoretical calculation. Thus, the reduced energy gap after ordered heterogeneity accelerates the electron transfer, greatly boosting the photocatalytic CO₂ reduction activity. This work demonstrates a method for developing crystalline, heterogeneous photocatalysts with definite structures and enhanced, catalytic performance.

Mechanism and selectivity of photocatalyzed CO2 reduction by a function-integrated Ru catalyst

The phosphine-substituted Ru(II) polypyridyl complex, [Ru^II-(tpy)(pqn)(MeCN)]²⁺ (RuP), was disclosed to be an efficient photocatalyst for the reduction of CO₂ to CO with excellent selectivity. In this work, density functional calculations were performed to elucidate the reaction mechanism and understand the origin of selectivity. The calculations showed that RuP was first excited to the singlet excited state, followed by intersystem crossing to produce a triplet species (3RuIII(L˙-)-S), which was then reduced by the sacrificial electron donor BIH to generate a Ru^II(L˙^-) intermediate. The ligand of Ru^II(L˙^-) was further reduced to produce a Ru^II(L^2-) intermediate. The redox non-innocent nature of the tpy and pqn ligands endows the Ru center with an oxidation state of +2 after two one-electron reductions. Ru^II(L^2-) nucleophilically attacks CO₂, in which two electrons are delivered from the ligands to CO₂, affording a Ru^II-COOH species after protonation. This is followed by the protonation of the hydroxyl moiety of Ru^II-COOH, coupled with the C-O bond cleavage, resulting in the formation of Ru^II-CO. Ultimately, CO is dissociated after two one-electron reductions. Protonation of Ru^II(L^2-) to generate a Ru^II-hydride, a critical intermediate for the production of formate and H₂, turns out to be kinetically less favorable, even though it is thermodynamically more favorable. This fact is due to the presence of a Ru²⁺ ion in the reduced catalyst, which disfavors its protonation.

Recent Advances in the Catalytic Applications of Lanthanide-Oxo Clusters

Lanthanide-oxo/hydroxo clusters (LOCs) in this mini-review refer to polynuclear complexes featuring a polyhedral metal-oxo/hydroxo cluster core of lanthanide ions exclusively or with coexisting 3d metal ions. We summarize herein the recent works using this unique family of cluster complexes for catalysis; this aspect of research stands in stark contrast to their extensively studied synthetic and structural chemistry as well as the much-researched magnetic properties. Following a brief introduction of the synthetic strategies for these clusters, pertinent results from available literature reports are surveyed and discussed according to the types of catalyzed reactions. Particular attention was paid to the selection of a cluster catalyst for a specific type of reactions as well as the corresponding reaction mechanism. To the end, the advantages and challenges in utilizing LOCs as multifunctional catalysts are summarized, and possible future research directions are proposed.

Mechanistic Insights Into Iron(II) Bis(pyridyl)amine-Bipyridine Skeleton for Selective CO2 Photoreduction

A bis(pyridyl)amine-bipyridine-iron(II) framework (Fe(BPAbipy)) of complexes 1-3 is reported to shed light on the multistep nature of CO₂ reduction. Herein, photocatalytic conversion of CO₂ to CO even at low CO₂ concentration (1 %), together with detailed mechanistic study and DFT calculations, reveal that 1 first undergoes two sequential one-electron transfer affording an intermediate with electron density on both Fe and ligand for CO₂ binding over proton. The following 2 H⁺ -assisted Fe-CO formation is rate-determining for selective CO₂ -to-CO reduction. A pendant, proton-shuttling α-OH group (2) initiates PCET for predominant H₂ evolution, while an α-OMe group (3) cancels the selectivity control for either CO or H₂ . The near-unity selectivity of 1 and 2 enables self-sorting syngas production at flexible CO/H₂ ratios. The unprecedented results from one kind of molecular catalyst skeleton encourage insight into the beauty of advanced multi-electron and multi-proton transfer processes for robust CO₂ RR by photocatalysis.

Well-defined Co9S8 cages enable the separation of photoexcited charges to promote visible-light CO2 reduction

Exploring affordable cocatalysts with high performance for boosting charge separation and CO₂ activation is an effective strategy to reinforce CO₂ photoreduction efficiency. Herein, well-defined Co₉S₈ cages are exploited as a nonprecious promoter for visible-light CO₂ reduction. The Co₉S₈ cages are prepared via a multistep strategy with ZIF-67 particles as the precursor and fully characterized by physicochemical techniques. The hollow Co₉S₈ cocatalyst with a high surface area and profuse catalytically active centers is discovered to accelerate separation and transfer of light-induced charges, and strengthen concentration and activation of CO₂ molecules. In a hybrid photosensitized system, these Co₉S₈ cages efficiently promote the deoxygenative reduction of CO₂ to generate CO, with a high yield rate of 35 μmol h^-1 (i.e., 35 mmol h^-1 g^-1). Besides, this cocatalyst is also of high stability for the CO₂ photoreduction reaction. Density functional theory (DFT) calculations reveal that the Ru(bpy)₃²⁺ photosensitizer is strongly absorbed on the Co₉S₈ (311) surface through forming four Co-C bonds, which can serve as the "bridges" to ensure quick electron transfer from the excited photosensitiser to the active Co₉S₈ cocatalyst, thus promoting the separation of photoexcited charges for ehannced CO₂ reduction performance.

Sensitized Photocatalytic CO2 Reduction With Earth Abundant 3d Metal Complexes Possessing Dipicolyl-Triazacyclononane Derivatives

Complexes based on nitrogen and sulfur containing ligands involving 3d metal centers are known for the electrocatalytic reduction of CO_2. However, photocatalytical activation has rarely been investigated. We herein present results on the light-driven CO₂ reduction using either Ir(dFppy)₃ [Ir, dFppy = 2-(4,6-difluorophenyl)pyridine] or [Cu(xant)(bcp)]⁺, (Cu, xant = xantphos, bcp = bathocuproine) as photosensitizer in combination with TEA (triethylamine) as sacrificial electron donor. The 3d metal catalysts have either dptacn (dipicolyl-triazacyclononane, L^N3) or dpdatcn (dipicolyl-diazathiocyclononane, L^N2S) as ligand framework and Fe³⁺, Co³⁺ or Ni²⁺ as central metal ion. It turned out that the choice of ligand, metal center and solvent composition influences the selectivity for product formation, which means that the gaseous reduction products can be solely CO or H₂ or a mixture of both. The ratio between these two products can be controlled by the right choice of reaction conditions. With using Cu as photosensitizer, we could introduce an intermolecular system that is based solely on 3d metal compounds being able to reduce CO₂.

Rapid electron transfer via dynamic coordinative interaction boosts quantum efficiency for photocatalytic CO2 reduction

The fulfillment of a high quantum efficiency for photocatalytic CO₂ reduction presents a key challenge, which can be overcome by developing strategies for dynamic attachment between photosensitizer and catalyst. In this context, we exploit the use of coordinate bond to connect a pyridine-appended iridium photosensitizer and molecular catalysts for CO₂ reduction, which is systematically demonstrated by ¹H nuclear magnetic resonance titration, theoretical calculations, and spectroscopic measurements. The mechanistic investigations reveal that the coordinative interaction between the photosensitizer and an unmodified cobalt phthalocyanine significantly accelerates the electron transfer and thus realizes a remarkable quantum efficiency of 10.2% ± 0.5% at 450 nm for photocatalytic CO₂-to-CO conversion with a turn-over number of 391 ± 7 and nearly complete selectivity, over 4 times higher than a comparative system with no additional interaction (2.4%±0.2%). Moreover, the decoration of electron-donating amino groups on cobalt phthalocyanine can optimize the quantum efficiency up to 27.9% ± 0.8% at 425 nm, which is more attributable to the enhanced coordinative interaction rather than the intrinsic activity. The control experiments demonstrate that the dynamic feature of coordinative interaction is important to prevent the coordination occupancy of labile sites, also enabling the wide applicability on diverse non-noble-metal catalysts.

Positioning photosensitizer and catalyst complexes in photocatalytic systems is a promising method to direct desired electron transfers. Here, authors employ a dynamic coordinative interaction between molecular components to improve CO₂ photoreduction to CO with a high quantum efficiency of 27.9%.