Enhanced Menshutkin SN2 Reactivity in Mesoporous Silica: The Influence of Surface Catalysis and Confinement

Surface functionalized perovskite nanocrystals: a design strategy for organelle-specific fluorescence lifetime multiplexing

Fluorescent molecules or materials with high photoluminescence quantum yields and stability towards photobleaching are ideally suited for multiplex imaging. Despite complying with such properties, perovskite nanocrystals (Pv-NCs) are rarely used for bioimaging owing to their toxicity and limited stability in aqueous media and towards human physiology. We aim to address these deficiencies by designing core-shell structures with Pv-NCs as the core and surface-engineered silica as the shell (SiO2@Pv-NCs) since silica is recognized as a biologically benign carrier material and is known to be excreted through urine. The post-grafting methodology is adopted for developing [SiO2@Pv-NCs]tpm and [SiO2@Pv-NCs]tsy (tpm: triphenylphosphonium ion, tsy: tosylsulfonamide) for specific imaging of mitochondria and endoplasmic reticulum (ER) of the live HeLa cell, respectively. A subtle difference in their average fluorescence decay times ([SiO2@Pv-NCs]tpm: tpm τ av = 3.1 ns and [SiO2@Pv-NCs]tsy: tsy τ av = 2.1 ns) is used for demonstrating a rare example of perovskite nanocrystals in fluorescence lifetime multiplex imaging.

Harnessing the High Interfacial Electric Fields on Water Microdroplets to Accelerate Menshutkin Reactions

Even though it is still an emerging field, the application of a high external electric field (EEF) as a green and efficient catalyst in synthetic chemistry has recently received significant attention for the ability to deliver remarkable control of reaction selectivity and acceleration of reaction rates. Here, we extend the application of the EEF to Menshutkin reactions by taking advantage of the spontaneous high electric field at the air-water interfaces of sprayed water microdroplets. Experimentally, a series of Menshutkin reactions were accelerated by 7 orders of magnitude. Theoretically, both density functional theory calculations and ab initio molecular dynamics simulations predict that the reaction barrier decreases significantly in the presence of oriented external electric fields, thereby supporting the notion that the electric fields in the water droplets are responsible for the catalysis. In addition, the ordered solvent and reactant molecules oriented by the electric field alleviate the steric effect of solvents and increase the successful collision rates, thus facilitating faster nucleophilic attack. The success of Menshutkin reactions in this study showcases the great potential of microdroplet chemistry for green synthesis.

CH/CH2 Group Clusters Doping Methane Hydrate Cages

Methane hydrate is a crystalline compound with methane molecules as guest species trapped in host water cages. In this study, we detected methane hydrate with water cages doped by (C_aromatic-H)₅ clusters, (C_aromatic-H)₆ clusters, and (3C_aliphatic-H₂ + 2H₂O) clusters using current spectroscopic techniques and differential scanning calorimetry (DSC). Methane molecules are trapped in the doped cages with type sI forming in nanoscale silica gel pores. The relative quantity ratio of host carbon to guest carbon in the doped hydrate sample reaches approximately 3.58. Methane hydrate doped by CH/CH₂ group clusters greatly improves the ability of the hydrate unit cell to store methane and increases the stability of methane hydrate. Fast proton diffusion in the doped methane hydrate was confirmed. The results of this study will provide efficient and energy saving technical support for disruptive changes in hydrate storage and transportation of methane gas technology with a doped and dense solid phase.

Graphene-induced planarization of cyclooctatetraene derivatives

Stable equilibrium compounds containing a planar antiaromatic cyclooctatetraene (COT) ring are promising candidates for organic electronic devices such as organic semiconductor transistors. The planarization of COT by incorporation into rigid planar π-systems, as well as by oxidation or reduction has attracted considerable attention in recent years. Using dispersion-corrected density functional theory calculations, we explore an alternative approach of planarizing COT derivatives by adsorption onto graphene. We show that strong π-π stacking interactions between graphene and COT derivatives induce a planar structure with an antiaromatic central COT ring. In addition to being reversible, this strategy provides a novel approach for planarizing COT without the need for incorporation into a rigid structure, atomic substitution, oxidation, or reduction.

Mesoporous Silica-Coated Upconversion Nanoparticles Assisted Photodynamic Therapy Using 5-Aminolevulinic Acid: Mechanistic and In Vivo Studies

Exclusively red-emitting upconversion nanoparticles (UCNPs) with the composition NaErF₄:0.5%Tm as a core and NaYF₄ as a shell were synthesized for performing photodynamic therapy (PDT). A possible mechanism was proposed for core-shell UCNPs formation. For loading a maximum amount of 5-aminolevulinic acid (5-ALA), mesoporous silica coating was performed on UCNPs. Studies under dark conditions confirmed the biocompatibility of 5-ALA-loaded UCNPs formulation (UCNPs-5-ALA) with MCF-7 cells. Meanwhile, studies under light-exposed conditions exhibited effective cytotoxicity against MCF-7 cells. Studies employing D₂O-based cell cultured media and addition of DABCO in cell culture established that the cell death was due to oxidation of cellular components by reactive oxygen species (ROS) triggering the apoptosis. The formation of ROS was confirmed by DCF(H)DA-based ROS analysis via fluorescence microscopy to demonstrate the ROS production, which mediates the programmed cell death. Additionally, we have validated the apoptosis in MCF-7 cells with flow cytometry analyses. This was further confirmed by an electrophoretic mobility shift assay on nuclear extract and measurement of mitochondrial membrane potential. In the case of animal model studies, the formulation UCNPs-5-ALA without irradiation (980 nm) did not possess any in vivo cytotoxicity on tumor-induced SCID mice and there was a minimum migration of UCNPs-5-ALA to the vital organs but maximum retention at the tumor site only. Meanwhile, only the mice treated with UCNPs-5-ALA and irradiated on the tumor region with 980 nm laser (500 mW) for 20 min possessed a tumor with a size reduced to about 75% as compared with the corresponding control groups. To the best of our knowledge, this type of study was conducted for the first time employing exclusively red-emitting phosphors for effective PDT.

Ultrafast Dynamics and Liquid Structure in Mesoporous Silica: Propagation of Surface Effects in a Polar Aprotic Solvent

Enhancement of processes ranging from gas sorption to ion conduction in a liquid can be substantial upon nanoconfinement. Here, the dynamics of a polar aprotic solvent, 1-methylimidazole (MeIm), in mesoporous silica (2.8, 5.4, and 8.3 nm pore diameters) were examined using femtosecond infrared vibrational spectroscopy and molecular dynamics simulations of a dilute probe, the selenocyanate (SeCN^-) anion. The long vibrational lifetime and sensitivity of the CN stretch enabled a comprehensive investigation of the relatively slow time scales and subnanometer distance dependences of the confined dynamics. Because MeIm does not readily donate hydrogen bonds, its interactions in the hydrophilic silanol pores differ more from the bulk than those of water confined in the same mesopores, resulting in greater structural order and more dramatic slowing of dynamics. The extent of surface effects was quantified by modified two-state models used to fit three spatially averaged experimental observables: vibrational lifetime, orientational relaxation, and spectral diffusion. The length scales and the models (smoothed step, exponential decay, and simple step) describing the transitions between the distinctive shell behavior at the surface and the bulk-like behavior at the pore interior were compared to those of water. The highly nonuniform distributions of the SeCN^- probe and antiparallel layering of MeIm revealed by the simulations guided the interpretation of the results and development of the analytical models. The results illustrate the importance of electrostatic effects and H-bonding interactions in the behavior of confined liquids.

Transport and retention of porous silicon-coated zero-valent iron in saturated porous media

Porous silicon-coated zero-valent iron (Fe⁰@p-SiO₂) is a promising material for in-situ contaminated groundwater remediation. However, investigations of factors that affect the transport of Fe⁰@p-SiO₂ remain incomplete. In the present study, Fe⁰@p-SiO₂ composites were prepared by a SiO₂-coated technology, and a series of column experiments were conducted to examine the effects of media size, ionic strength, and injection velocity and concentration on retention and transport in saturated porous media. Results showed that the obtained Fe⁰@p-SiO₂ is a core-shell composite with zero-valent iron as the core and porous silicon as the shell. Media size, injection velocity, Fe⁰ concentration, and ionic strength had a significant impact on the transport of Fe⁰@p-SiO₂. Fe⁰@p-SiO₂ effluent concentrations decreased with a smaller media size. Increasing initial particle concentration and ionic strength led to a decrease in particle transport. High particle retention was observed near the middle of the column, especially with high injection concentration. That was also observable in the condition of lower injection velocity or finer media. The results indicated that two transport behaviors during particles transport, which were "agglomeration-straining" and "detachment-re-migration". Moreover, the dominated mechanisms for Fe⁰@p-SiO₂ transport and retention in saturated porous media are hydrodynamic dispersion and interception. Given the results, in practical engineering applications, proper injection velocity and concentration should be selected depending on the pollution status of groundwater and the geochemical environment to ensure an effective in-situ reaction zone.

Mechanisms and Intermediates in the True Liquid Crystal Templating Synthesis of Mesoporous Silica Materials

Mesoporous silica materials (MSMs) produced by true liquid crystal templating (TLCT) are often considered as direct inverted replicas of the initial lyotropic liquid crystal (LLC) phase. However, the predictive design of tailor-made MSMs requires the full knowledge of the TLCT process, which is still incomplete. Here, we tackle this issue by monitoring the structural evolution during the templating process by small-angle X-ray scattering, showing that after the addition of the silica source the reaction mixture is first isotropic and then an intermediary liquid crystal phase appears, which is the key to the success of the templating process, namely the formation of ordered MSMs. We analyze the structure and the formation dynamics of this intermediary phase and present a simple theoretical model, which allows us to connect the structural parameters of the initial LLC and the MSM. These results provide an enhanced understanding of the TLCT process and are an important step toward the predictable synthesis of new MSMs in the future.

Highly efficient removal and detoxification of phenolic compounds using persulfate activated by MnOx@OMC: Synergistic mechanism and kinetic analysis

Persulfate-based advanced oxidation technology exhibits great potential for hazardous organic pollutant removal from wastewater. Acceleration of pollutant degradation needs to be elucidated, particularly for heterogeneous catalytic systems. In this study, manganese oxide ordered mesoporous carbon composites (MnO_x@OMC) were prepared by nano-casting method and used for persulfate activation to degrade phenol. Kinetics analysis indicate that the rate of phenol degradation using MnO_x@OMC composites was improved by 34.9 folds relative to that using a mixture of MnO_x and OMC. The phenol toxicity towards Caenorhabditis elegans could be totally reduced within 8 min. The different roles of MnO_x and OMC in persulfate activation were confirmed to validate their synergistic effect. MnO_x provided major active sites for persulfate activation in accordance with the surface Mn³⁺/Mn⁴⁺ cycle to induce SO₄^•- radicals. The OMC matrix provided the adsorption sites to enrich phenol molecules on the catalytic surface and promote the interfacial electron transfer process for persulfate activation. Moreover, a novel kinetic model with two distinct kinetic stages was established to verify the effects of phenol and persulfate on phenol removal.

Graphene oxide aerogel assembled by dimethylaminopropylamine /N-isopropylethylenediamine for the removal of copper ions

Graphene Oxide Monolith composites (GOMs) were prepared using dimethylaminopropylamine (DMPDA) and N-isopropylethylenediamine (IPEDA) with one-step method in water medium, respectively. Fourier transform-infrared (FTIR), X-Ray Diffraction (XRD) tests proved the formation of new structure and credible interactions between crosslinkers and GO. Scanning electron microscopy (SEM) showed distinct change of morphology after complexing. Bath adsorption tests suggested that the fast adsorption of copper ions (II) was strongly affected by pH, ionic strength, temperature, and concentration, etc.. Isothermal Langmuir and Freundlich kinetic model showed the different degree of fitting conformity according to different conditions. SEM and XRD further provided a supporter of adsorption of copper ions onto GOMs, and Density functional theory (DFT) was used to analyze the crosslinking details of DMPDA and GO and the adsorption mechanism of copper ions. The theoretical calculation results clarified an efficacious and quantitative understanding for the crosslinking and adsorption mechanism.

Template-Free Synthesis of Mesoporous β-MnO2 Nanoparticles: Structure, Formation Mechanism, and Catalytic Properties

Mesoporous β-MnO₂ nanoparticles were synthesized by a template-free low-temperature crystallization of Mn⁴⁺ precursors (low-crystallinity layer-type Mn⁴⁺ oxide, c-distorted H⁺-birnessite) produced by the reaction of MnO₄^- and Mn²⁺. The Mn starting materials, pH of the reaction solution, and calcination temperatures significantly affect the crystal structure, surface area, porous structure, and morphology of the manganese oxides formed. The pH conditions during the precipitation of Mn⁴⁺ precursors are important for controlling the morphology and porous structure of β-MnO₂. Nonrigid aggregates of platelike particles with slitlike pores (β-MnO₂-1 and -2) were obtained from the combinations of NaMnO₄/MnSO₄ and NaMnO₄/Mn(NO₃)₂, respectively. On the other hand, spherelike particles with ink-bottle shaped pores (β-MnO₂-3) were formed in NaMnO₄/Mn(OAc)₂ with pH adjustment (pH 0.8). The specific surface areas for β-MnO₂-1, -2, and -3 were much higher than those for nonporous β-MnO₂ nanorods synthesized using a typical hydrothermal method (β-MnO₂-HT). On the other hand, c-distorted H⁺-birnessite precursors with a high interlayer metal cation (Na⁺ and K⁺) content led to the formation of α-MnO₂ with a 2 × 2 tunnel structure. These mesoporous β-MnO₂ materials acted as effective heterogeneous catalysts for the aerobic oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) as a bioplastic monomer and for the transformation of aromatic alcohols to the corresponding aldehydes, where the catalytic activities of β-MnO₂-1, -2, and -3 were approximately 1 order of magnitude higher than that of β-MnO₂-HT. β-MnO₂-3 exhibited higher catalytic activity (especially for larger molecules) than the other β-MnO₂ materials, and this is likely attributed to the nanometer-sized spaces.