Synergizing Inter and Intraband Transitions in Defective Tungsten Oxide for Efficient Photocatalytic Alcohol Dehydration to Alkenes

Spatial Identification of Mott-Schottky Effect at Electrocatalytic Pd/Metal Oxide Interfaces for the Oxygen Reduction Reaction

To elucidate the microstructure and charge transfer behavior at the interface of Pd/metal oxide semiconductor (MOS) catalysts and systematically explore the crucial role of the Mott-Schottky effect in the oxygen reduction reaction (ORR) electrocatalysis process, this study established a testing system for spatially identifying Mott-Schottky effects and electronic properties at Pd/MOS interfaces, leveraging highly sensitive Kelvin probe force microscopy (KPFM). This system enabled visualization and quantification of the surface potential difference and Mott-Schottky barrier height (ΦSBH) at the Pd/MOS heterojunction interfaces. Furthermore, a series of Pd/MOS Mott-Schottky catalysts were constructed based on differences in work functions between Pd and n-type MOS. The abundant oxygen vacancies in these catalysts facilitated the adsorption and activation of oxygen molecules. Notably, the intensity of the built-in electric field in the Pd/MOS Mott-Schottky catalysts was calculated through surface potential and zeta potential analysis, systematically correlating the Mott-Schottky effect at the heterojunction interface of Pd/MOS with ORR activity and kinetics. By comprehensively exploring the correlation between the Mott-Schottky effect and ORR performance in Pd/MOS catalysts using the KPFM testing system, this study provides necessary tools and approaches for a deep understanding of heterogeneous interface charge transfer mechanisms, as well as for optimizing catalyst design and enhancing ORR performance.

Ultrafine Pt Nanoparticles on Defective Tungsten Oxide for Photocatalytic Ethylene Synthesis

The selective conversion of ethane (C2H6) to ethylene (C2H4) under mild conditions is highly wanted, yet very challenging. Herein, it is demonstrated that a Pt/WO3-x catalyst, constructed by supporting ultrafine Pt nanoparticles on the surface of oxygen-deficient tungsten oxide (WO3-x) nanoplates, is efficient and reusable for photocatalytic C2H6 dehydrogenation to produce C2H4 with high selectivity. Specifically, under pure light irradiation, the optimized Pt/WO3-x photocatalyst exhibits C2H4 and H2 yield rates of 291.8 and 373.4 µmol g-1 h-1, respectively, coupled with a small formation of CO (85.2 µmol g-1 h-1) and CH4 (19.0 µmol g-1 h-1), corresponding to a high C2H4 selectivity of 84.9%. Experimental and theoretical studies reveal that the vacancy-rich WO3-x catalyst enables broad optical harvesting to generate charge carriers by light for working the redox reactions. Meanwhile, the Pt cocatalyst reinforces adsorption of C2H6, desorption of key reaction species, and separation and migration of light-induced charges to promote the dehydrogenation reaction with high productivity and selectivity. In situ diffuse reflectance infrared Fourier transform spectroscopy and density functional theory calculation expose the key intermediates formed on the Pt/WO3-x catalyst during the reaction, which permits the construction of the possible C2H6 dehydrogenation mechanism.

Electron Tandem Transport Channel in a Cu3P/Sv-ZnIn2S4 p-n Heterojunction for Photothermal-Photocatalytic Benzyl Alcohol Oxidation and H2 Production

The development of photocatalytic systems with an electron tandem transport channel represents a promising avenue for improving the utilization of photogenerated electrons and holes despite encountering significant challenges. In this study, ZnIn2S4 (Sv-ZIS) with sulfur vacancies was fabricated using a solvothermal technique to create defect energy levels. Subsequently, Cu3P nanoparticles were coupled onto the surface of Sv-ZIS, forming a Cu3P/Sv-ZIS p-n heterojunction with an electron tandem transport channel. Experimental findings demonstrated that this tandem transport channel enhanced the carrier lifetime and separation efficiency. In addition, mechanistic investigations unveiled the formation of a robust built-in electric field (BEF) at the interface between Cu3P and Sv-ZIS, providing a driving force for electron migration. The combined consequences of the transport channel, the strong BEF, and photothermal effect led to a surface carrier separation efficiency of 65.85%. Consequently, Cu3P/Sv-ZIS achieved simultaneous H2 yield and benzaldehyde production rates of 18,101.4 and 15,012.6 μmol·g-1·h-1, which were 2.31 and 2.62 times higher than those of ZnIn2S4, respectively. This work exemplifies the design of the p-n heterojunction for the efficient utilization of photogenerated electrons and holes.

Cascaded *CO-*COH Intermediates on a Nonmetallic Plasmonic Photocatalyst for CO2-to-C2H6 with 90.6 % Selectivity

Oxygen vacancies (OV) in nonmetallic plasmonic photocatalysts can decrease the energy barrier for CO2 reduction, boosting C1 intermediate production for potential C2 formation. However, their susceptibility to oxidation weakens C1 intermediate adsorption. Herein we proposed a "photoelectron injection" strategy to safeguard OV in W18O49 by creating a W18O49/ZIS (W/Z) plasmonic photocatalyst. Moreover, photoelectrons contribute to the local multi-electron environment of W18O49, enhancing the intrinsic excitation of its hot electrons with extended lifetimes, as confirmed by in situ XPS and femtosecond transient absorption analysis. Density functional theory calculations revealed that W/Z with OV enhances CO2 adsorption, activating *CO production, while reducing the energy barrier for *COH production (0.054 eV) and subsequent *CO-*COH coupling (0.574 eV). Successive hydrogenation revealed that the free energy for *CH2CH2 hydrogenation (0.108 eV) was lower than that for *CH2CH2 desorption for C2H4 production (0.277 eV), favouring C2H6 production. Consequently, W/Z achieves an efficient C2H6 activity of 653.6 μmol g-1 h-1 under visible light, with an exceptionally high selectivity of 90.6 %. This work offers a new strategy for the rational design of plasmonic photocatalysts with high selectivity for C2+ products.

Constructing High-Active Surface of Plasmonic Tungsten Oxide for Photocatalytic Alcohol Dehydration

Plasmonic semiconductors with broad spectral response hold significant promise for sustainable solar energy utilization. However, the surface inertness limits the photocatalytic activity. Herein, a novel approach is proposed to improve the body crystallinity and increase the surface oxygen vacancies of plasmonic tungsten oxide by the combination of hydrochloric acid (HCl) regulation and light irradiation, which can promote the adsorption of tert-butyl alcohol (TBA) on plasmonic tungsten oxide and overcome the hindrance of the surface depletion layer in photocatalytic alcohol dehydration. Additionally, this process can concentrate electrons for strong plasmonic electron oscillation on the near surface, facilitating rapid electron transfer within the adsorbed TBA molecules for C-O bond cleavage. As a result, the activation barrier for TBA dehydration is significantly reduced by 93% to 6.0 kJ mol-1, much lower than that of thermocatalysis (91 kJ mol-1). Therefore, an optimal isobutylene generation rate of 1.8 mol g-1 h-1 (selectivity of 99.9%) is achieved. A small flow reaction system is further constructed, which shows an isobutylene generation rate of 12 mmol h-1 under natural sunlight irradiation. This work highlights the potential of plasmonic semiconductors for efficient photocatalytic alcohol dehydration, thereby promoting the sustainable utilization of solar energy.

Synchronizing Efficient Purification of VOCs in Durable Solar Water Evaporation over a Highly Stable Cu/W18O49@Graphene Material

Solar-driven clean water production is challenged by VOCs (volatile organic compounds), which pose health risks in distilled water. Herein, we developed a Cu/W18O49@Graphene photothermal-photocatalytic material addressing VOCs contamination. Plasmonic coupling between Cu and W18O49 enhances light absorption, and 1-2 layers of graphene encapsulation protects oxygen vacancies within W18O49 while facilitating hot electron extraction, effectively mitigating their ultrafast relaxation. Density functional theory calculations revealed enhanced VOCs adsorption on graphene. These synergies address oxygen vacancy decay in W18O49 and provide more active sites for gas-liquid-solid triphase photocatalytic reactions. Integrated with a three-dimensional floating evaporator substrate, the optimized Cu/W18O49@Graphene material achieved an effective water evaporation rate of 1.41 kg m-2 h-1 (efficiency of 88.6%), exceptional stability (>120 h), and remarkable 99% phenol removal under 1 sun irradiation (1 kW m-2). This work provides a promising solution to mitigate VOCs contamination in solar-driven water evaporation.

π-Conjugated In-Plane Heterostructure Enables Long-Lived Shallow Trapping in Graphitic Carbon Nitride for Increased Photocatalytic Hydrogen Generation

The relatively short-lived excited states, such as the nascent electron-hole pairs (excitons) and the shallow trapping states, in semiconductor-based photocatalysts produce an exceptionally high charge carrier recombination rate, dominating a low solar-to-fuel performance. Here, a π-conjugated in-plane heterostructure between graphitic carbon nitride (g-CN) and carbon rings (C_rings ) (labeling g-CN/C_rings ) is effectively synthesized from the thermolysis of melamine-citric acid aggregates via a microwave-assisted heating process. The g-CN/C_rings in-plane heterostructure shows remarkably suppressed excited-state decay and increased charge carrier population in photocatalysis. Kinetics analysis from the femtosecond time-resolved transient absorption spectroscopy illustrates that the g-CN/C_rings π-conjugated heterostructure produces slower exciton annihilation (τ₁  = 7.9 ps) and longer shallow electron trapping (τ₂  = 407.1 ps) than pristine g-CN (τ₁  = 3.6 ps, τ₂  = 264.1 ps) owing to C_rings incorporation, both of which enable more photoinduced electrons to participate in the photocatalytic reactions, thereby realizing photoactivity enhancement. As a result, the photocatalytic activity exhibits an eightfold enhancement in visible-light-driven H₂ generation. This work provides a viable route of constructing π-conjugated in-plane heterostructures to suppress the excited-state decay and improve the photocatalytic performance.

Full-spectrum nonmetallic plasmonic carriers for efficient isopropanol dehydration

Plasmonic hot carriers have the advantage of focusing, amplifying, and manipulating optical signals via electron oscillations which offers a feasible pathway to influence catalytic reactions. However, the contribution of nonmetallic hot carriers and thermal effects on the overall reactions are still unclear, and developing methods to enhance the efficiency of the catalysis is critical. Herein, we proposed a new strategy for flexibly modulating the hot electrons using a nonmetallic plasmonic heterostructure (named W₁₈O₄₉-nanowires/reduced-graphene-oxides) for isopropanol dehydration where the reaction rate was 180-fold greater than the corresponding thermocatalytic pathway. The key detail to this strategy lies in the synergetic utilization of ultraviolet light and visible-near-infrared light to enhance the hot electron generation and promote electron transfer for C-O bond cleavage during isopropanol dehydration reaction. This, in turn, results in a reduced reaction activation barrier down to 0.37 eV (compared to 1.0 eV of thermocatalysis) and a significantly improved conversion efficiency of 100% propylene from isopropanol. This work provides an additional strategy to modulate hot carrier of plasmonic semiconductors and helps guide the design of better catalytic materials and chemistries.