Neamin as an immunogen for the development of a generic ELISA detecting gentamicin, kanamycin, and neomycin in milk

Gold/DNA-Cu2+ Complex Nanozyme-Based Aptamer Lateral Flow Assay for Highly Sensitive Detection of Kanamycin

Aptamer-based lateral flow analysis (Apt-LFAs) has promising applications in many fields. Nanozymes have demonstrated high potential in improving the performance of Apt-LFAs and have been increasingly utilized in recent studies. In this study, we developed a nanozyme-based Apt-LFA for the rapid and sensitive detection of kanamycin by using a novel dual-functionalized AuNPs@polyA-DNA/GpG-Cu2+ nanozyme as a nanoprobe. In the nanoprobe design, the polyA-cDNA strand can discriminate a kanamycin aptamer from the kanamycin/aptamer complex, and the GpG-Cu2+ complex can amplify the detection signal by catalyzing the chromogenic reaction. The nanozyme Apt-LFA can quantify kanamycin in the range of 1-250 ng/mL with an LOD of 0.08 ng/mL, which demonstrated a 4-fold sensitivity improvement and had a wider linear range than the conventional AuNP-based LFA. The Apt-LFA was successfully applied to the detection of kanamycin in honey with good recoveries. Our dual-functionalized AuNP nanoprobe is easily prepared and can be highly compatible with the conventional AuNP-DNA-based LFA platform; thus, it can be extended to the application of Apt-LFAs for other small molecules.

A comprehensive review of aptamer screening and application for lateral flow strip: Current status and future perspectives

The detection of biomarkers is of great significance for medical diagnosis, food safety, environmental monitoring, and agriculture. However, bio-detection technology at present often necessitates complex instruments, expensive reagents, specialized expertise, and prolonged procedures, making it challenging to fulfill the demand for rapid, sensitive, user-friendly, and economical testing. In contrast, lateral flow strip (LFS) technology offers simple, fast, and visually accessible detection modality, allowing real-time analysis of clinical specimens, thus finding widespread utility across various domains. Within the realm of LFS, the application of aptamers as molecular recognition probes presents distinct advantages over antibodies, including cost-effectiveness, smaller size, ease of synthesis, and chemical stability. In recent years, aptamer-based LFS has found extensive application in qualitative, semi-quantitative, and quantitative detection across food safety, environmental surveillance, clinical diagnostics, and other domains. This review provided a concise overview of different aptamer screening methodologies, selection strategies, underlying principles, and procedural, elucidating their respective advantages, limitations, and applications. Additionally, we summarized recent strategies and mechanisms for aptamer-based LFS, such as the sandwich and competitive methods. Furthermore, we classified LFSs constructed based on aptamers, considering the rapid advancements in this area, and discussed their applications in biological and chemical detection. Finally, we delved into the current challenges and future directions in the development of aptamer and aptamer-based LFS. Although this review was not thoroughly, it would serve as a valuable reference for understanding the research progress of aptamer-based LFS and aid in the development of new types of aptasensors.

A reusable fiber-embedded microfluidic chip for rapid and sensitive on-site detection of kanamycin residues in water environments

The overuse and abuse of antibiotics have led to increased pollution in water environments. Thus, it is crucial to develop a rapid, high-frequency, and cost-effective method for on-site detection of antibiotics. In this regard, a reusable fiber-embedded microfluidic chip was constructed by combining a microfluidic chip with a functionalized fiber bioprobe that served as both a biorecognition element and an optical transducer. The fiber-embedded microfluidic chip enabled the quantitative detection of kanamycin (KANA) by integrating a portable all-fiber evanescent wave fluorescence detection device. Under optimized conditions, quantitative KANA detection was achieved with a detection limit of 0.03 μg L-1 and a linear detection range of 0.21-10.3 μg L-1. The accurate detection of KANA in various water samples can be completed within 25 min without pretreatment. The functionalized fiber-embedded microfluidic chip could be reused more than 200 times without significant performance loss. To demonstrate its suitability for practical applications, the fiber-embedded microfluidic chip was used to investigate KANA residues in surface waters obtained from the Qinghe River in Beijing, China. The results were compared with those of a traditional enzyme-linked immunosorbent assay, which showed a high correlation. Compared to conventional optical microfluidic chips, the proposed fiber-embedded microfluidic chip has several advantages, including its ease of use, miniaturization, cost-effectiveness, reusability, and high flexibility. It is an ideal alternative for rapid, sensitive on-site detection of antibiotics and other trace substances in environmental, food, and medical fields.

An inner filter effect-based fluorescent aptasensor for sensitive detection of kanamycin in complex samples using gold nanoparticles and graphene oxide quantum dots

In this work, a label-free fluorescent aptasensor based on the inner filter effect (IFE) between gold nanoparticles (AuNPs) and graphene oxide quantum dots (GOQDs) was developed for the detection of kanamycin in complex samples. AuNPs are capable of functioning as the fluorescence absorber of GOQDs because of the complementary overlap between their absorption spectra and the emission spectra of GOQDs. AuNPs can effectively quench the fluorescence of GOQDs via the IFE and modulate it with their aggregation state. In the presence of kanamycin, the aptamer is released from the surface of AuNPs, leading to their salt-induced aggregation and the fluorescence recovery of GOQDs. Under the optimum conditions, the fluorescence intensity of GOQDs was linearly proportional to the concentration of kanamycin over the range from 5 to 600 nM, with a detection limit of 3.6 nM. Moreover, the fluorescent aptasensor was successfully applied for kanamycin detection in complex samples (milk, honey and serum), which might hold great promise for kanamycin detection in food safety control and clinical research.

Accelerated CRISPR/Cas12a-based small molecule detection using bivalent aptamer

CRISPR/Cas holds great promise for biosensing applications, however, restricted to nucleic acid targets. Here, we broaden the sensing target of CRISPR/Cas to small molecules via integrating a bivalent aptamer as a recognition component. Using adenosine 5'-triphosphate (ATP) as a model molecule, we found that a bivalent aptamer we selected could shorten the binding time between the aptamer and ATP from 30 min to 3 min, thus dramatically accelerating the detection of ATP. The accelerated bivalent aptamer binding to ATP was mainly ascribed to the extended conformation of the aptamer, which was stabilized through linking with a 5 T bases connector on specific loops of the monovalent aptamer. To facilitate on-site detection, we integrated lateral flow assay (LFA) with the CRISPR/Cas sensing strategy (termed BA-CASLFA) to serve as a visual readout of the presence of ATP. In addition, in the CASLFA platform, due to the unique characteristics of LFA, the thermal step of Cas12a inactivation can be omitted. The BA-CASLFA could output a colorimetric "TURN ON" signal for ATP within 26 min, which could be easily discriminated by the naked eye and sensitively quantified by the portable reader. Furthermore, we showed the versatility of BA-CASLFA for detecting kanamycin using a kanamycin bivalent aptamer obtained through the same design as the ATP bivalent aptamer. Therefore, this strategy is amenable to serve as a general sensing strategy for small molecular targets. The above work opened a new way in developing CRISPR-based on-site sensors for clinic diagnosis, food safety, and environmental analysis.

Non-thiolated nucleic acid functionalized gold nanoparticle-based aptamer lateral flow assay for rapid detection of kanamycin

A novel Apt-LFA has been established for kanamycin based on non-thiolated nucleic acid-modified colloidal gold nanoprobe (AuNPs@polyA-DNA). The improvement in nucleic acid hybridization speed and efficiency was verified by modifying AuNPs with polyA-DNA strands instead of thiolated oligonucleotides (SH-DNA) strands. Moreover, the AuNPs@polyA-DNA was explored to apply in an Apt-LFA. The experimental factors including the concentration of the aptamer, the concentration of SA-DNA_T conjugate, the incubation time, and temperature were carefully investigated. In addition, the kanamycin aptamer was modified by extending several bases at its end to modulate the hybridization complementary strand, which was found to significantly improve the performance of Apt-LFA. Under optimal experimental conditions, the Apt-LFA can detect kanamycin in honey with a LOD of 250 ng mL^-1 by the naked eyes. A linear range of 50-1250 ng mL^-1 was obtained with a LOD of 15 ng mL^-1 in honey by a portable reader. The Apt-LFA was successfully applied to the detection of kanamycin in honey with recoveries of 95.1-105.2%.

A self-oriented beacon liquid crystal assay for kanamycin detection with AuNPs signal enhancement

The authors report a self-oriented beacon liquid crystal (LC) biosensor for kanamycin (Kana) detection with gold nanoparticle (AuNPs) signal enhancement. In this study, an assay was proposed for Kana detection using the aptamer as a self-oriented beacon. Without an additional orientation agent, the Kana aptamer was used as a self-oriented beacon both as an orientation agent for the LCs and as a signal recognition probe for biological molecules. Gold nanoparticles are blended with desired concentrations of the target molecules, which can greatly improve the performance of the biosensor. In the presence of Kana, AuNPs-Kana-aptamer conjugates will form on the sensing interface of the biosensor, which can remarkably destroy the orientated arrangement of the LCs, resulting in changes in the corresponding polarized images of the LCs. The limit of Kana detection is as low as 0.1 pmol L^-1. It is important to note that the self-oriented beacons are immobilized on the assembled film of the glass slides for the specific recognition of Kana, simultaneously allowing the homeotropic orientation of the LCs. This study also provides a mechanism for the self-orientation beacon and liquid crystal biosensing.

Chemiluminescence microarray immunoassay for multiple aminoglycoside antibiotics based on carbon nanotube-assisted signal amplification

The simultaneous determination of multiple analytes has been an urgent demand in screening of antibiotic residues in food products of animal origin due to its higher analysis efficiency. Five aminoglycoside antibiotics (AGAs) have been monitored in milk, including gentamicin (GEN), kanamycin (KAN), neomycin (NEO), and streptomycin/dihydrostreptomycin (STR/diSTR). A chemiluminescence microarray immunoassay (CLMIA) based on nitrocellulose membrane had been developed for the detection of multiple AGAs, which the LODs for STR, KAN, NEO, and GEN were 4.74 ng/mL, 4.97 ng/mL, 2.99 ng/mL, and 4.42 ng/mL respectively. To improve the sensitivity of immunoassay, single-well carbon tubes (SWCNTs) were utilized as solid support for loading horseradish peroxidase-labelled goat anti-mouse antibody to obtain the multi-enzyme particles. After the optimization of usage of multi-enzyme particles and antibodies, the enhanced CLMIA was established and evaluated. The LODs were 1.25 ng/mL for STR, 0.64 ng/mL for KAN, 0.38 ng/mL for GEN, and 0.39 ng/mL for NEO, which was improved by threefold, sevenfold, 11-fold, and sevenfold compared with the conventional CLMIA developed. These methods presented higher specificity and repeatability. Finally, the enhanced CLMIA based on CNT-assisted multi-enzyme particles was utilized to analyze twenty-five milk samples from local market and dairy farm, which all the results were below the LOD. The enhanced CLMIA showed the great application potential for the detection of multiple targets simultaneously and provided efficient tool for the screening of pollutants in food.

Photoelectrochemical Aptasensors Constructed with Photosensitive PbS Quantum Dots/TiO2 Nanoparticles for Detection of Kanamycin

Kanamycin (Kana) is widely used as a veterinary medicine and its abuse causes a serious threat to human health, raising the urgent demand for detection of residual Kana in animal-derived food with high specificity and sensitivity. Here, we developed a photoelectrochemical (PEC) biosensor for rapid quantification of Kana, with lead sulfide quantum dots/titanium dioxide nanoparticles (PbS QDs/TiO₂ NPs) as a photosensitive composite, a Kana-specific DNA aptamer as a functional sensor, and ruthenium(III) hexaammine (Ru(NH₃)₆³⁺) as a signal booster. To prepare the PEC aptasensor, TiO₂ NPs, PbS QDs, and polyethyleneimine (PEI) were respectively used to modify the indium tin oxide electrode, and then the amine-terminated aptamer probe was connected to the PEI via glutaraldehyde. Finally, Ru(NH₃)₆³⁺ was attached on the surface of the aptamer to increase the photocurrent intensity. When Kana binds competitively with Ru(NH₃)₆³⁺ to the aptamer immobilized on the surface of the aptasensor, Ru(NH₃)₆³⁺ will be released from the aptamer, resulting in a decrease of the photocurrent signal. This PEC aptasensor exhibits a good linear relationship between the photocurrent shift and the logarithm of Kana concentration within the range of 1.0-300.0 nmol L^-1, and the detection limit is 0.161 nmol L^-1. Importantly, the PEC aptasensor presented good detection selectivity owing to specific interaction with Kana and was successfully implemented to quantify Kana in honey and milk, suggesting that the PEC aptasensor has the potential of rapid detection of residual Kana in animal-derived foods.

Aptamer-based ellipsometric sensor for ultrasensitive determination of aminoglycoside group antibiotics from dairy products

BACKGROUND

Residual antibiotics taken along with food consumed through the food chain are the main cause of the super-bacteria and may damage organs such as liver and kidney. Therefore, monitoring residual antibiotic levels of products in the food chain is both important and a requirement. Maximum residual limits for kanamycin and neomycin are 150 ng mL^-1 and 500 ng mL^-1 respectively, which are challenging for most sensor platforms. In this paper, a novel method is presented for the determination of antibiotics residues in animal-derived foods.

RESULTS

Aptamer-based kanamycin and neomycin biosensors based on the spectroscopic ellipsometer and the surface plasmon resonance-enhanced total internal reflection ellipsometer methods as transducing element were developed. Detection limits of both sensor platforms were in the 0.1-1 nmol L^-1 ranges, and the detection range was between the detection limit and 1000 nmol L^-1 .

CONCLUSION

Both ellipsometry-based aptasensors can be used as an alternative to the existing enzyme-linked immunosorbent assay-based method in terms of assay time (10 min), detection limit (0.22 ng mL^-1 for neomycin and 0.048 ng mL^-1 for kanamycin), and detection range. © 2020 Society of Chemical Industry.

A label-free and carbon dots based fluorescent aptasensor for the detection of kanamycin in milk

A novel label-free aptasensor for kanamycin detection was constructed using gold nanoparticles (AuNPs) as absorber to quench the fluorescence of carbon dots (CDs) via the inner filter effect (IFE). The strategy was mainly relied on the fact that the absorption spectra of AuNPs overlapped with the fluorescence excitation spectra of fluorophores as well as the specific binding capacity of Ky2 aptamer to kanamycin. Upon adding kanamycin antibiotic, the free aptamer sequences are firstly exhausted to form some complexes, which leads to AuNPs aggregation in high salt concentration. Consequently, the absorber's absorption spectrum changes and no longer overlaps with the fluorescence emission spectrum of the CDs, which results in obvious fluorescence recovery of the aptasensor. Herein, the effects of some vital parameters like the type and number of nanoparticles on the fluorescent aptasensor have been investigated. Under optimal conditions, the proposed aptasensor can detect kanamycin in a linear range of 0.04-0.24 μM, with a limit of detection (LOD) as low as 18 nM. Moreover, the further studies also validate the applicability of the proposed aptasensor in milk samples, revealing that it may have enormous potential utility for practical kanamycin detection in food products in the future.

Antibiotic residues in milk: Past, present, and future

Now-a-days, various types of antibiotics are being used worldwide in veterinary sector indiscriminately for promotion of growth and treatment of the livestock. Significant portions of antibiotics are released through milk of dairy animals unaltered and exert serious harmful effects on human health. This review evaluates and compare researches on antibiotic residues in milk in published literatures from Pubmed, CrossRef, CAB direct, DOAJ, JournalTOCs, AGRICOLA, ScientificGate, Electronic Journals Library, CAB abstracts, Global Health Databases, Global Impact Factor, Google Scholar, Park Directory of Open Access Journals, BanglaJOL and ISC E-Journals. Antibiotics residue in milk was first detected in 60s and then with an increasing trend with highest after 2,000 (188). The highest no. of works, 49 (21.87%) were accomplished in China, followed by Spain, 30 (13.39%); Germany, 11 (4.91%); and USA, 10 (4.46%). Continent-wise highest researches are published from Europe, 105 (46.88%), followed by Asia, 77 (34.38%); South America, 18 (8.04%); North America, 16 (7.14%); and Africa, 8 (3.57%). For detection, Bovine milk sample is mostly used, 193 (86.16%), followed by ovine, 19 (8.48%); and caprine, 14 (6.25%). Acetonitrile was used in maximum cases (77) for processing the samples. Chromatographic technique was the highest, 115 (51.34%) for detection. Residue of β-lactam group have been detected mostly 133 (36.54%), followed by tetracyclines, 51 (14.01%); fluoroquinolones, 49 (13.46%); sulfonamides, 46 (12.64%); and aminoglycosides, 38 (10.44%). This review observe that antibiotics residues are more common in milk samples that are being manifested in increasing researches on antibiotic detection and measures should adopt to cease this residue.

Smartphone-based kanamycin sensing with ratiometric FRET

Smartphone-based fluorescence detection is a promising avenue for biosensing that can aid on-site analysis. However, quantitative detection with fluorescence in the field has been limited due to challenges with robust excitation and calibration requirements. Here, we show that ratiometric analysis with Förster resonance energy transfer (FRET) between dye pairs on DNA aptamers can enable rapid and sensitive kanamycin detection. Since our detection scheme relies on ligand binding-induced changes in the aptamer tertiary structure, it is limited only by the kinetics of ligand binding to the aptamer. Our FRET-based kanamycin binding aptamer (KBA) sensor displays two linear ranges of 0.05-5 nM (detection limit of 0.18 nM) and 50-900 nM of kanamycin. The aptamer displays high specificity even in the presence of the 'natural' background from milk. By immobilizing the aptamer in the flow cell, our KBA sensor design is also suitable for repeated kanamycin detection. Finally, we show that the ratiometric FRET-based analysis can be implemented on a cheap custom-built smartphone setup. This smartphone-based FRET aptamer scheme detects kanamycin in a linear range of 50-500 nM with a limit of detection (LOD) of 28 nM.

Development of Structure-Switching Aptamers for Kanamycin Detection Based on Fluorescence Resonance Energy Transfer

The structure-switching aptamers are designed for the simple and rapid detection of kanamycin based on the signal transduction principle of fluorescence resonance energy transfer (FRET). The structure switch is composed of kanamycin-binding aptamers and the complementary strands, respectively labeled with fluorophore and quencher, denoted as FDNA and QDNA. In the absence of kanamycin, FDNA and QDNA form the double helix structure through the complementary pairing of bases. The fluorophore and the quencher are brought into close proximity, which results in the fluorescence quenching because of the FRET mechanism. In the presence of kanamycin, the FDNA specifically bind to the target due to the high affinity of aptamers, and the QDNA are dissociated. The specific recognition between aptamers and kanamycin will obstruct the formation of structure switch and reduce the efficiency of FRET between FDNA and QDNA, thus leading to the fluorescence enhancement. Therefore, based on the structure-switching aptamers, a simple fluorescent assay for rapid detection of kanamycin was developed. Under optimal conditions, there was a good linear relationship between kanamycin concentration and the fluorescence signal recovery. The linear range of this method in milk samples was 100-600 nM with the detection limit of 13.52 nM (3σ), which is well below the maximum residue limit (MRL) of kanamycin in milk. This method shows excellent selectivity for kanamycin over the other common antibiotics. The structure-switching aptamers have been successfully applied to the detection of kanamycin spiked in milk samples with the satisfying recoveries between 101.3 and 109.1%, which is well-consistent with the results from LC-MS/MS. Due to the outstanding advantages of facile operation, rapid detection, high sensitivity, excellent specificity, and low cost, the application and extension of this strategy for rapid determination of antibiotics in food samples may greatly improve the efficiency in food safety and quality supervision.

Impedimetric aptasensor for kanamycin by using carbon nanotubes modified with MoSe2 nanoflowers and gold nanoparticles as signal amplifiers

An aptamer based impedimetric method is described for the determination of kanamycin. A hydrothermal route was applied to synthesize molybdenum selenide nanoflowers (MoSe₂) which are promising materials for use in sensing interfaces due to their high specific surface and excellent electrical conductivity. Carbon nanotubes were then decorated with the MoSe₂ nanoflowers and gold nanoparticles (AuNP/CNT/MoSe₂) and placed on a glassy carbon electrode to serve as a signal amplifier. An amino-terminal kanamycin-specific aptamer was covalently linked to carboxy groups of acid-oxidized CNTs on the electrode to act as the signalling probe. The various steps during the construction of the modified electrode were monitored by scanning electron microscopy, wavelength-dispersive and energy-dispersive X-ray spectroscopy, electrochemical impedance spectroscopy, and cyclic voltammetry. The change in electrochemical signal was quantified by electrochemical impedance spectroscopy, typically at a working voltage of 0.22 V vs. Ag/AgCl. The calibration plot is linear in the 1 pM-0.1 nM and 100 nM-10 μM kanamycin concentration range and has a 0.28 pM detection limit. The assay is outstandingly selective, sensitive, stable and reproducible. Graphical abstract ᅟ.

Click chemistry inspired copper sulphide nanoparticle-based fluorescence assay of kanamycin using DNA aptamer

A highly selective and sensitive fluorescence assay for kanamycin has been developed that depends on complementation of two splits of DNA aptamer. One DNA split was labeled with CuS nanoparticle and the other was decorated with biotin, which enabled coupling with streptavidin magnesphere paramagnetic particles (PMPs). Complementation of the two-aptamer splits happened only in the presence of kanamycin and the subsequent sandwich was separated via a magnet. The released Cu(II) was reduced to Cu(I) by sodium ascorbate and finally catalyzed the click reaction between fluorogenic 3-azido-7-hydroxycoumarin and propargyl alcohol to afford the corresponding fluorescent 1,4-disubstituted-1,2,3-triazole. The fluorescence signal produced (λ_ex. = 365 nm, λ_em. = 470 nm) was dependent on kanamycin concentration. Fluorescence signal amplification was found to be in good linear relationship with the logarithm of kanamycin concentration in the range of 0.04-20 nM. Furthermore, the proposed assay showed a good reproducibility, high selectivity and low detection limits for kanamycin determination. In addition, the capability of the proposed method to detect kanamycin in biological samples with satisfactory results was demonstrated.

A dual-signal amplification strategy for kanamycin based on ordered mesoporous carbon-chitosan/gold nanoparticles-streptavidin and ferrocene labelled DNA

An ultrasensitive electrochemical aptasensor for kanamycin (KAN) detection was constructed with a dual-signal amplification strategy. The aptasensor achieved greatly amplified sensitivity due to the excellent electrical conductivity of the ordered mesoporous carbon-chitosan (OMC-CS)/gold nanoparticles-streptavidin (AuNPs-SA) and DNA2 labelled with ferrocene (Fc-DNA2). The AuNPs-SA was used to immobilize the DNA strand (biotin labelled) with the biotin-streptavidin system. The DNA2 strand containing the KAN aptamer was labelled with ferrocene to increase the current signal on the electrode surface when bound to KAN. Some factors that affect the performance of the aptasensor were optimized, and the proposed aptasensor provided a wide linear range from 1 × 10^-10 M to 4 × 10^-6 M, with a detection limit as low as 35.69 pM for KAN under the optimized conditions. This aptasensor had satisfactory electrochemical performance with good stability, sensitivity and reproducibility. Additionally, it also displayed a good specificity for KAN without interference from competitive analogues. Furthermore, the constructed aptasensor was successfully used to detect KAN in a real milk sample. The proposed method for KAN detection has great potential for the detection of other antibiotics.

Evanescent wave aptasensor for continuous and online aminoglycoside antibiotics detection based on target binding facilitated fluorescence quenching

The biosensors capable for on-site continuous and online monitoring of pollutants in environment are highly desired due to their practical importance and convenience. The group specific detection of pollutants is especially attractive due to the diversity of environmental pollutants. Here we devise an evanescent wave aptasensor based on target binding facilitated fluorescence quenching (FQ-EWA) for the online continuous and group-specific detection of aminoglycoside antibiotics (AMGAs). In FQ-EWA, a fluorophore labeled DNA aptamer selected against kanamycin was used for both the target recognition in solution and signal transduction on optical fiber of EWA. The aptamers form multiple-strand complex (M-Apt) in the absence of AMGAs. The binding between AMGA and the aptamer disrupts M-Apt and leads to the formation of AMGA -aptamer complex (AMGA-Apt). The photo-induced electron transfer between the fluorophore and AMGA partially quenches the fluorescence of AMGA-Apt. The structure-selective absorption of AMGA-Apt over M-Apt on the graphene oxide further quenches the fluorescence of AMGA-Apt. Meanwhile, the unbound aptamers in solution assemble with the unlabeled aptamers immobilized on the fiber to form M-Apt. The amount of M-Apt on the fiber is inversely proportional to the concentration of AMGAs, enabling the signal-off detection of AMGAs from 200nM to 200μM with a detection limit of 26nM. The whole detection process is carried out in an online mode without any offline operation, providing a great benefit for system automation and miniaturization. FQ-EWA also shows great surface regeneration capability and enables the continuous detection more than 60 times.

Detection of kanamycin and gentamicin residues in animal-derived food using IgY antibody based ic-ELISA and FPIA

Our aim in this study is to show that IgY antibody based immunoassays could be used to detect antibiotic residues in animal-derived food. Briefly, full antigens of gentamicin (Gent) and kanamycin (Kana) were used to immunize the laying chickens to prepare IgY antibodies. Then, these antibodies were evaluated by FPIA and ic-ELISA to detect Gent/Kana in animal-derived samples. The IC₅₀ of FPIA and ic-ELISA based anti-Gent IgY were 7.70±0.6μg/mL and 0.32±0.06μg/mL, respectively. The IC₅₀ of FPIA and ic-ELISA based anti-Kana IgY were 7.97±0.9μg/mL and 0.15±0.01μg/mL. The limits of detection (LOD, IC₁₀) for FPIA based anti-Gent/Kana IgY were 0.17 and 0.007μg/mL, respectively. The LOD for ic-ELISA were both 0.001μg/mL. These results indicated that the ic-ELISA might more suitable for antibiotic residues detection than FPIA.

Design of an aptamer – based fluorescence displacement biosensor for selective and sensitive detection of kanamycin in aqueous samples

A label-free detection method for kanamycin A using an aptamer-based displacement biosensor has been developed.

Engineering Biological Approaches for Detection of Toxic Compounds: A New Microbial Biosensor Based on the Pseudomonas putida TtgR Repressor

Environmental contamination by toxic organic compounds and antimicrobials is one of the causes for the recent surge of multidrug-resistant pathogenic bacteria. Monitoring contamination is therefore the first step in containment of antimicrobial resistance and requires the development of simple, sensitive, and quantitative tools that detect a broad spectrum of toxic compounds. In this study, we have engineered a new microbial biosensor based on the ttgR-regulated promoter that controls expression of the TtgABC extrusion efflux pump of Pseudomonas putida, coupled to a gfp reporter. The system was introduced in P. putida DOT-T1E, a strain characterized by its ability to survive in the presence of high concentrations of diverse toxic organic compounds. This whole-cell biosensor is capable to detect a wide range of structurally diverse antibiotics, as well as compounds such as toluene or flavonoids.

Signal-on electrochemical detection of antibiotics at zeptomole level based on target-aptamer binding triggered multiple recycling amplification

In the work, a signal-on electrochemical DNA sensor based on multiple amplification for ultrasensitive detection of antibiotics has been reported. In the presence of target, the ingeniously designed hairpin probe (HP1) is opened and the polymerase-assisted target recycling amplification is triggered, resulting in autonomous generation of secondary target. It is worth noting that the produced secondary target could not only hybridize with other HP1, but also displace the Helper from the electrode. Consequently, methylene blue labeled HP2 forms a "close" probe structure, and the increase of signal is monitored. The increasing current provides an ultrasensitive electrochemical detection for antibiotics down to 1.3 fM. To our best knowledge, such work is the first report about multiple recycling amplification combing with signal-on sensing strategy, which has been utilized for quantitative determination of antibiotics. It would be further used as a general strategy associated with more analytical techniques toward the detection of a wide spectrum of analytes. Thus, it holds great potential for the development of ultrasensitive biosensing platform for the applications in bioanalysis, disease diagnostics, and clinical biomedicine.

Signal-on electrochemical detection of antibiotics based on exonuclease III-assisted autocatalytic DNA biosensing platform

In this work, a novel electrochemical DNA sensor based on exonuclease III (Exo III)-assisted autocatalytic DNA biosensing platform for ultrasensitive detection of antibiotics has been reported.

Highly specific determination of gentamicin by induced collapse of Au–lipid capsules

Residues of gentamicin in food pose a threat to human health.

Aptasensors modified by antimony tin oxide nanoparticle-chitosan based on interdigitated array microelectrodes for tetracycline detection

Aptasensors modified by antimony tin oxide nanoparticle-chitosan (nano ATO-CS) based on interdigitated array microelectrodes (IDAMs) were developed for the detection of tetracycline.

An aptamer-based signal-on bio-assay for sensitive and selective detection of Kanamycin A by using gold nanoparticles

In this study, a simple and sensitive aptamer-based fluorescence method for the detection of Kanamycin A by using gold nanoparticles (AuNPs) has been developed. In this assay, AuNPs were utilized as DNA nanocarrier as well as efficient fluorescence quencher. In the absence of Kanamycin A, dye-labeled aptamer could be adsorbed onto the surface of AuNPs and the fluorescence signal was quenched. In the presence of Kanamycin A, the specific binding between dye-labeled aptamer and its target induced the formation of rigid structure, which led to dye-labeled aptamer releasing from the surface of AuNPs and the fluorescence intensity was recovered consequently. Under optimum conditions, calibration modeling showed that the analytical linear range covered from 0.8nM to 350nM and the detection limit of 0.3nM was realized successfully. This proposed bio-assay also showed high selectivity over other antibiotics. Meanwhile, this strategy was further used to determine the concentrations of Kanamycin A in milk sample with satisfying results.

Label-free detection of kanamycin based on a G-quadruplex DNA aptamer-based fluorescent intercalator displacement assay

This work was the first to report that the kanamycin-binding DNA aptamer (5'-TGG GGG TTG AGG CTA AGC CGA-3') can form stable parallel G-quadruplex DNA (G4-DNA) structures by themselves and that this phenomenon can be verified by nondenaturing polyacrylamide gel electrophoresis and circular dichroism spectroscopy. Based on these findings, we developed a novel label-free strategy for kanamycin detection based on the G4-DNA aptamer-based fluorescent intercalator displacement assay with thiazole orange (TO) as the fluorescence probe. In the proposed strategy, TO became strongly fluorescent upon binding to kanamycin-binding G4-DNA. However, the addition of kanamycin caused the displacement of TO from the G4-DNA-TO conjugate, thereby resulting in decreased fluorescent signal, which was inversely related to the kanamycin concentration. The detection limit of the proposed assay decreased to 59 nM with a linear working range of 0.1 μM to 20 μM for kanamycin. The cross-reactivity against six other antibiotics was negligible compared with the response to kanamycin. A satisfactory recovery of kanamycin in milk samples ranged from 80.1% to 98.0%, confirming the potential of this bioassay in the measurement of kanamycin in various applications. Our results also served as a good reference for developing similar fluorescent G4-DNA-based bioassays in the future.

An ultrasensitive homogeneous aptasensor for kanamycin based on upconversion fluorescence resonance energy transfer

We developed an ultrasensitive fluorescence resonance energy transfer (FRET) aptasensor for kanamycin detection, using upconversion nanoparticles (UCNPs) as the energy donor and graphene as the energy acceptor. Oleic acid modified upconversion nanoparticles were synthesized through a hydrothermal process followed by a ligand exchange with hexanedioic acid. The kanamycin aptamer (5'-NH2-AGATGGGGGTTGAGGCTAAGCCGA-3') was tagged to UCNPs through an EDC-NHS protocol. The π-π stacking interaction between the aptamer and graphene brought UCNPs and graphene in close proximity and hence initiated the FRET process resulting in quenching of UCNPs fluorescence. The addition of kanamycin to the UCNPs-aptamer-graphene complex caused the fluorescence recovery because of the blocking of the energy transfer, which was induced by the conformation change of aptamer into a hairpin structure. A linear calibration was obtained between the fluorescence intensity and the logarithm of kanamycin concentration in the range from 0.01 nM to 3 nM in aqueous buffer solution, with a detection limit of 9 pM. The aptasensor was also applicable in diluted human serum sample with a linear range from 0.03 nM to 3 nM and a detection limit of 18 pM. The aptasensor showed good specificity towards kanamycin without being disturbed by other antibiotics. The ultrahigh sensitivity and pronounced robustness in complicated sample matrix suggested promising prospect of the aptasensor in practical applications.

Aptasensor based on the synergistic contributions of chitosan-gold nanoparticles, graphene-gold nanoparticles and multi-walled carbon nanotubes-cobalt phthalocyanine nanocomposites for kanamycin detection

An electrochemical aptasensor was developed for the detection of kanamycin based on the synergistic contributions of chitosan-gold nanoparticles (CS-AuNPs), graphene-gold nanoparticles (GR-AuNPs) and multi-walled carbon nanotubes-cobalt phthalocyanine (MWCNTs-CoPc) nanocomposites. The aptasensor was prepared by sequentially dripping CS-AuNPs, GR-AuNPs and MWCNTs-CoPc nanocomposites onto a gold electrode (GE) surface. During the above process, these nanomaterials showed a remarkable synergistic effect towards the aptasensor. CS-AuNPs, GR-AuNPs and MWCNTs-CoPc as the nanocomposites mediator improved electron relay during the entire electron transfer process and the aptasensor response speed. The electrochemical properties of the modified processes were characterized by cyclic voltammetry (CV). The morphologies of the nanocomposites were characterized by scanning electron microscopy (SEM). The experimental conditions such as the concentration of the aptamer, the time, temperature and the pH were optimized. Based on the synergistic contributions of CS-AuNPs, GR-AuNPs and MWCNTs-CoPc nanocomposites, the proposed aptasensor displayed high sensitivity, high specificity, a low detection limit (5.8 × 10(-9) M) (S/N = 3) and excellent stability. It was successfully applied to the detection of kanamycin in real milk spiked samples.