Determination of beta-lactams in milk using a surface plasmon resonance-based biosensor

Advances in Gold Nanoparticles-Based Colorimetric Aptasensors for the Detection of Antibiotics: An Overview of the Past Decade

Misuse of antibiotics has recently been considered a global issue because of its harmful effects on human health. Since conventional methods have numerous limitations, it is necessary to develop fast, simple, sensitive, and reproducible methods for the detection of antibiotics. Among numerous recently developed methods, aptasensors are fascinating because of their good specificity, sensitivity and selectivity. These kinds of biosensors combining aptamer with colorimetric applications of gold nanoparticles to recognize small molecules are becoming more popular owing to their advantageous features, for example, low cost, ease of use, on-site analysis ability using naked eye and no prerequisite for modern equipment. In this review, we have highlighted the recent advances and working principle of gold nanoparticles based colorimetric aptasensors as promising methods for antibiotics detection in different food and environmental samples (2011–2020). Furthermore, possible advantages and disadvantages have also been summarized for these methods. Finally, the recent challenges, outlook, and promising future perspectives for developing novel aptasensors are also considered.

On Column Binding a Real-Time Biosensor for β-lactam Antibiotics Quantification

This work aimed to develop accurate, quick, and practical tools for the detection of residues of penicillin G antibiotic in biological and non-biological samples. The assays were developed based on the binding mechanism of β-lactam to penicillin-binding proteins; samples of different concentrations of penicillin G were incubated with in vitro expressed 6X-Histidine-tagged soluble penicillin-binding protein (PBP2x*) of Streptococcus pneumoniae (S. pneumoniae), whereby penicillin G in samples specifically binds to PBP2x*. The fluorescent-labeled β-lactam analogue Bocillin FL was used as a competent substrate, and two different routes estimated the amounts of the penicillin G. The first route was established based on the differences in the concentration of non-bounded Bocillin FL molecules within the reactions while using a real-time polymerase chain reaction (PCR)-based method for fluorescence detection. The second route depended on the amount of the relative intensity of Bocillin FL bounded to Soluble PBP-2x*, being run on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-page), visualized by a ChemiDoc-It^®2 Imager, and quantified based on the fluorescence affinity of the competent substrate. While both of the methods gave a broad range of linearity and high sensitivity, the on column based real-time method is fast, non-time consuming, and highly sensitive. The method identified traces of antibiotic in the range 0.01-0.2 nM in addition to higher accuracy in comparison to the SDS-based detection method, while the sensitivity of the SDS-based method ranged between 0.015 and 2 µM). Thus, the on column based real time assay is a fast novel method, which was developed for the first time based on the binding inhibition of a fluorescence competitor material and it can be adapted to screen traces of penicillin G in any biological and environmental samples.

Residues of antibiotics in milk: persistence and quality interference

The objective of this study was (i) to analyze antibiotic residues, two which were beta-lactam antibiotics, one tetracycline, and one quinolone in the milk of lactating animals; (ii) to evaluate the interference of the drug ceftiofur which is considered as discard-zero. The SNAPduo™ ST Plus kit was used to evaluate the presence of beta-lactam antibiotics and tetracyclines in natural milk. Medications based on penicillin, ceftiofur, enrofloxacin, and oxytetracycline were used. As expected, the milk from control animals and animals administered with enrofloxacin did not present antibiotic residue because it is not one of the classes detected by the SNAPduo™ ST Plus kit, and thus it was used to prove the efficiency of the test. Ceftiofur, known as a “discard-zero” antibiotic, tested positive for the SNAPduo™ ST Plus kit and the BetaStar Combo® “S” test. Chemical residues were detected in cow’s milk treated with different groups of antibiotics after the withdrawal time indicated in the package inserts of the medicines used.

Antibiotic residues in milk: Past, present, and future

Now-a-days, various types of antibiotics are being used worldwide in veterinary sector indiscriminately for promotion of growth and treatment of the livestock. Significant portions of antibiotics are released through milk of dairy animals unaltered and exert serious harmful effects on human health. This review evaluates and compare researches on antibiotic residues in milk in published literatures from Pubmed, CrossRef, CAB direct, DOAJ, JournalTOCs, AGRICOLA, ScientificGate, Electronic Journals Library, CAB abstracts, Global Health Databases, Global Impact Factor, Google Scholar, Park Directory of Open Access Journals, BanglaJOL and ISC E-Journals. Antibiotics residue in milk was first detected in 60s and then with an increasing trend with highest after 2,000 (188). The highest no. of works, 49 (21.87%) were accomplished in China, followed by Spain, 30 (13.39%); Germany, 11 (4.91%); and USA, 10 (4.46%). Continent-wise highest researches are published from Europe, 105 (46.88%), followed by Asia, 77 (34.38%); South America, 18 (8.04%); North America, 16 (7.14%); and Africa, 8 (3.57%). For detection, Bovine milk sample is mostly used, 193 (86.16%), followed by ovine, 19 (8.48%); and caprine, 14 (6.25%). Acetonitrile was used in maximum cases (77) for processing the samples. Chromatographic technique was the highest, 115 (51.34%) for detection. Residue of β-lactam group have been detected mostly 133 (36.54%), followed by tetracyclines, 51 (14.01%); fluoroquinolones, 49 (13.46%); sulfonamides, 46 (12.64%); and aminoglycosides, 38 (10.44%). This review observe that antibiotics residues are more common in milk samples that are being manifested in increasing researches on antibiotic detection and measures should adopt to cease this residue.

Electrochemical aptasensor for ampicillin detection based on the protective effect of aptamer-antibiotic conjugate towards DpnII and Exo III digestion

A simple and sensitive electrochemical method was developed for ampicillin detection based on the protective effect of aptamer-antibiotic conjugate towards endonuclease DpnII activity. Without ampicillin, DNA aptamer firstly hybridizes with the capture probe to form double strand DNA (dsDNA) structure. Then, dsDNA is cleaved by DpnII restriction endonuclease to form two dsDNA fragments. In which, one fragment is released from electrode surface and the other fragment is kept on electrode surface. Then, the dsDNA fragment kept on electrode surface is further digested by Exo III, which leads to the release of the dsDNA fragment from electrode surface. Thus, the electrochemical signal increases due to the decrease of the interface electron transfer resistance causing by the release of dsDNA from electrode surface. However, the formation of dsDNA is blocked when forming aptamer-ampicillin conjugate, which makes the obstruction of the digestion of DpnII and Exo III towards capture probe. Thus, a weak electrochemical signal is achieved due to the increase of the interface electron transfer resistance causing by the dsDNA on the electrode surface. Based on the relationship between ampicillin concentration and the decrease of the electrochemical signal, antibiotic is detected with low detection limit of 32 pM under optimal conditions, which is lower than the mandated maximum residue limit of European Union (9.93 nM). The developed method also presents good detection selectivity. Moreover, the applicability is confirmed by detecting antibiotic in milk and water samples with satisfactory results.

Penicillin Detection by Tobacco Mosaic Virus-Assisted Colorimetric Biosensors

The presentation of enzymes on viral scaffolds has beneficial effects such as an increased enzyme loading and a prolonged reusability in comparison to conventional immobilization platforms. Here, we used modified tobacco mosaic virus (TMV) nanorods as enzyme carriers in penicillin G detection for the first time. Penicillinase enzymes were conjugated with streptavidin and coupled to TMV rods by use of a bifunctional biotin-linker. Penicillinase-decorated TMV particles were characterized extensively in halochromic dye-based biosensing. Acidometric analyte detection was performed with bromcresol purple as pH indicator and spectrophotometry. The TMV-assisted sensors exhibited increased enzyme loading and strongly improved reusability, and higher analysis rates compared to layouts without viral adapters. They extended the half-life of the sensors from 4 - 6 days to 5 weeks and thus allowed an at least 8-fold longer use of the sensors. Using a commercial budget-priced penicillinase preparation, a detection limit of 100 µM penicillin was obtained. Initial experiments also indicate that the system may be transferred to label-free detection layouts.

New methodologies in screening of antibiotic residues in animal-derived foods: Biosensors

Antibiotics are leading medicine asset for fighting against microbial infection, but also one of the important causes of death worldwide. Many antibiotics used as therapeutics and growth promotion agents in animals can lead to antibiotic residues in animal-derived food which harm the health of people. Hence, it is vital to screen antibiotic residues in animal derived foods. Typical methods for screening antibiotic residues are based on microbiological growth inhibition and immunological analyses. However these two methods have some disadvantages, such as poor sensitive, lack of specificity and etc. Therefore, it is necessary to develop simple, more efficient and high sensitive screening methods of antibiotic residues. These assays have been introduced for the screening of numerous food samples. Biosensors are emerging methods, applied in screening antibiotic residues in animal-derived foods. Two types of biosensors, whole-cell based biosensors and surface plasmon resonance-based sensors have been extensively used. Their advantages include portability, small sample requirement, high sensitivity and good specificity over the traditional screening methods.

A gold immunochromatographic assay for the rapid and simultaneous detection of fifteen β-lactams

A novel gold immunochromatographic assay (GICA) based on anti-β-lactam receptors was innovatively developed that successfully allowed rapid and simultaneous detection of fifteen β-lactams in milk samples in 5-10 minutes. By replacing the antibodies used in traditional GICA with anti-β-lactam receptors, the difficulty in producing broad specific antibodies against β-lactams was overcome. Conjugates of ampicillin with BSA and goat anti-mouse immunoglobulin (IgG) were immobilized onto the test and control lines on the nitrocellulose membrane, respectively. Since goat anti-mouse IgG does not combine with receptors, negative serum from mice labelled with gold nanoparticles (GNP) was mixed with GNP-labelled receptors. Results were obtained within 20 min using a paper-based sensor. The utility of the assay was confirmed by the analysis of milk samples. The limits of detection (LOD) for amoxicillin, ampicillin, penicillin G, penicillin V, cloxacillin, dicloxacillin, nafcillin, oxacillin, cefaclor, ceftezole, cefotaxime, ceftiofur, cefoperazone, cefathiamidine, and cefepime were 0.25, 0.5, 0.5, 0.5, 1, 5, 5, 10, 25, 10, 100, 10, 5, 5, and 2 ng mL(-1), respectively, which satisfies the maximum residue limits (MRL) set by the European Union (EU). In conclusion, our newly developed GICA-based anti-β-lactam receptor assay provides a rapid and effective method for one-site detection of multiple β-lactams in milk samples.

Design of a sensitive fluorescent polarization immunoassay for rapid screening of milk for cephalexin

In this paper we describe the development of a sensitive, fast, and easily performed fluorescence polarization immunoassay for determination of cephalexin in milk. The experimental work was performed to increase sensitivity and specificity. Therefore, the structures of the tracers were varied by synthesis of both cephalexin (CEX) and cephalotin (CET) conjugates with a variety of fluorescent labels. Two rabbit antisera containing antibodies against cephalexin and cephalotin were tested in homologous and heterologous combinations with the tracers. For every working antibody-tracer combination, the analytical conditions and cross-reactivity for structural analogues-cephalosporins and other antibiotics that could also be present in milk-were determined. It was found that the highest sensitivity was achieved by use of the homologous pair CET-EDF-anti-CET antibody (limit of detection (LOD) 0.4 μg kg(-1) for standard solutions prepared in buffer), but this combination was not appropriate because of high cross-reactivity with CET. For subsequent experiments, therefore, CEX- EDF-anti-CEX antibody were chosen (LOD 0.8 μg kg(-1) for standard solutions prepared in buffer). Part of this manuscript is devoted to the variation of precipitation agents for pretreatment of milk before analysis; milk is an extremely complicated matrix. The optimum protein precipitation agent was methanol. This technique for cephalexin determination was characterized by a limit of detection of 1 μg kg(-1). The method was validated by using naturally contaminated and spiked milk samples. The results obtained corresponded very well with those obtained by HPLC, which was used as confirmation method.

Optical nano antennas: state of the art, scope and challenges as a biosensor along with human exposure to nano-toxicology

The concept of optical antennas in physical optics is still evolving. Like the antennas used in the radio frequency (RF) regime, the aspiration of optical antennas is to localize the free propagating radiation energy, and vice versa. For this purpose, optical antennas utilize the distinctive properties of metal nanostructures, which are strong plasmonic coupling elements at the optical regime. The concept of optical antennas is being advanced technologically and they are projected to be substitute devices for detection in the millimeter, infrared, and visible regimes. At present, their potential benefits in light detection, which include polarization dependency, tunability, and quick response times have been successfully demonstrated. Optical antennas also can be seen as directionally responsive elements for point detectors. This review provides an overview of the historical background of the topic, along with the basic concepts and parameters of optical antennas. One of the major parts of this review covers the use of optical antennas in biosensing, presenting biosensing applications with a broad description using different types of data. We have also mentioned the basic challenges in the path of the universal use of optical biosensors, where we have also discussed some legal matters.

Biosensors, antibiotics and food

Antibiotics are medicine's leading asset for fighting microbial infection, which is one of the leading causes of death worldwide. However, the misuse of antibiotics has led to the rapid spread of antibiotic resistance among bacteria and the development of multiple resistant pathogens. Therefore, antibiotics are rapidly losing their antimicrobial value. The use of antibiotics in food production animals is strictly controlled by the European Union (EU). Veterinary use is regulated to prevent the spread of resistance. EU legislation establishes maximum residue limits for veterinary medicinal products in foodstuffs of animal origin and enforces the establishment and execution of national monitoring plans. Among samples selected for monitoring, suspected noncompliant samples are screened and then subjected to confirmatory analysis to establish the identity and concentration of the contaminant. Screening methods for antibiotic residues are typically based on microbiological growth inhibition, whereas physico-chemical methods are used for confirmatory analysis. This chapter discusses biosensors, especially whole-cell based biosensors, as emerging screening methods for antibiotic residues. Whole-cell biosensors can offer highly sensitive and specific detection of residues. Applications demonstrating quantitative analysis and specific analyte identification further improve their potential as screening methods.

Application of ultrasound-assisted matrix solid-phase dispersion extraction to the HPLC confirmatory determination of cephalosporin residues in milk

Ultrasound-assisted matrix solid-phase dispersion (MSPD) was applied to isolate eight cephalosporins (cefadroxil, cefaclor, cephalexin, cefotaxime, cefazolin, cefuroxime, cefoperazone and ceftiofur) from milk. Multi-residue analysis was subsequently performed by HPLC-diode array detection. Extraction yield by matrix solid-phase dispersion using Nexus sorbent was higher than various investigated SPE protocols. Three analytical columns, two conventional silica based and one monolithic, were compared based on resolution, peak shape and retention time. The optimum method using Chromolith RP-18e (100×4.6 mm) achieved separation in less than 16 min. Method validation was performed according to the European Union Decision 2002/657/EC, determining linearity, selectivity, stability, decision limit, detection capability, accuracy and precision. RSD values observed were lower than 15.3%. Recovery rates of examined antimicrobials from milk ranged from 93.8 to 101.9% for cefadroxil, from 94.7 to 103.6% for cefaclor, from 93.4 to 106.6% for cephalexine, from 104.1 to 115.3% for cefotaxime, from 97.1 to 105.6% for cefazolin, from 97.4 to 108.6% for cefuroxime, from 98.8 to 103.4% for cefoperazone and from 95.5 to 103.6% for ceftiofur. Correlation coefficients ranged from 0.9926 to 0.9999. CC(b) values were in the range from 103.5 to 112.3 μg/kg for analytes with a maximum residue limit of 100 μg/kg and from 54.4 to 56.3 μg/kg for those with a maximum residue limit of 50 μg/kg.

Ultrasensitive detection of testosterone using conjugate linker technology in a nanoparticle-enhanced surface plasmon resonance biosensor

A rationally designed oligoethylene glycol linker conjugate to testosterone was synthesised and covalently immobilized on a surface plasmon resonance (SPR) biosensor surface. The sensing surface was stable for more than 330 binding and regeneration cycles allowing a high degree of re-use. This surface was then used in the development of an ultrasensitive immunobiosensor system for testosterone in buffer utilizing both secondary antibody and gold nanoparticle signal enhancement. The mechanism for the increased sensitivity results from increased binding mass and a gold plasmon coupling effect. The addition of a secondary antibody with an attached gold nanoparticle increased the signal sensitivity of the assay 12.5-fold compared with primary antibody alone. In the enhanced format the assay had limits of detection (LOD) of 3.7 pgml(-1) with standard in running buffer, and 15.4 pgml(-1) in a stripped human saliva matrix. This immunobiosensor system has sufficient sensitivity to measure testosterone across the broad physiologically relevant range in male saliva (29-290 pgml(-1)) in under 13 min allowing monitoring of testosterone in near real-time.

Rapid ultrasensitive measurement of salivary cortisol using nano-linker chemistry coupled with surface plasmon resonance detection

Cortisol detection in saliva is of great interest for the diagnosis of various disease states and the monitoring of stress in humans. Currently, measurements are performed predominantly by radioimmunoassay (RIA) which is expensive, labour intensive, uses hazardous radioisotopes and involves extensive delays in obtaining results. A rationally designed cortisol-linker conjugate allowing high assay sensitivity was employed as a coating antigen in a microfluidic surface plasmon resonance (SPR) biosensor immunoassay for the ultrasensitive and rapid detection of salivary cortisol. Detection of cortisol is by competitive immunoassay using a secondary antibody for signal enhancement. The method requires no chemical extraction or complex sample pre-treatment despite high saliva viscosity. The cortisol assay was optimized for maximum sensitivity in buffer before being adapted for the salivary matrix, where it showed a limit of detection of 49 pg/mL. The results showed good correlation to RIA (r = 0.94). The biosensor assays showed an inter-assay coefficient of variation (CV) of 13.5% and recoveries close to 100%. The covalently immobilized sensor surface provided stable responses for more than 140 binding and regeneration cycles, enabling re-use. Cortisol in saliva was detected across the physiologically relevant range using the SPR immunobiosensor by employing a rationally designed assay format including signal enhancement for maximum sensitivity. The system can handle saliva matrix effects by use of chemical treatment during the assay to reduce non-specific binding to sensor surfaces. This sensor system provides an automated, high sensitivity analytical tool capable of yielding results in approximately 15 min. This biosensor could potentially be used for active stress-monitoring and in the diagnosis of disease.

Cephalosporins determination with a novel microbial biosensor based on permeabilized Pseudomonas aeruginosa whole cells

A new potentiometric microbial biosensor based on Pseudomonas aeruginosa was developed in this study for detecting the cephalosporin group of antibiotics. Preliminary results with the biosensor indicated that P. aeruginosa cells, when treated with lysozyme, showed more efficiency in detecting cephalosporin C in a wide concentration range of 0.1-11 mM with high sensitivity compared to the normal cells. Optimization of the three important biosensor design parameters permeabilized cell contents, quantities of gelatin, and glutaraldehyde resulted in high performance of the biosensor. The optimized values of the above parameters were cell contents 2.5 mg/cm(2), gelatin 8.5 mg/cm(2), and 0.25% glutaraldehyde. The assay conditions, namely phosphate buffer pH, ionic strength, and temperature, were optimized for best performance of the biosensor. The specificity test of the biosensor towards detecting different beta-lactam antibiotics showed good response only for the cephalosporins. The operational and storage stability in detecting cephalosporin C indicated very good potential of the biosensor in detecting cephalosporins with high accuracy.

Detecting penicillin G in milk with impedimetric label-free immunosensor

A label-free impedimetric flow injection immunosensor for the direct detection of penicillin G has been developed. Anti-penicillin G was immobilized on a gold working electrode modified with a self-assembled monolayer of thioctic acid. Real time monitoring of impedance was carried out at the optimum frequency of 160 Hz. Under optimum operating conditions the system provided a wide linear range between 1.0 x 10(-13) and 1.0 x 10(-8) M with a very low detection limit of 3.0 x 10(-15) M, much lower than the MRL of penicillin G in milk (1.2 x 10(-8) M). The immobilized anti-penicillin G on self-assembled thioctic acid monolayer gold electrode was very stable and provided good reproducible signal after regeneration up to 45 times with a relative standard deviation (R.S.D.) lower than 4%. Good recoveries and precisions were obtained when spiked raw milk samples were analyzed.

Survey of the year 2004 commercial optical biosensor literature

The year 2004 represents a milestone for the biosensor research community: in this year, over 1000 articles were published describing experiments performed using commercially available systems. The 1038 papers we found represent an approximately 10% increase over the past year and demonstrate that the implementation of biosensors continues to expand at a healthy pace. We evaluated the data presented in each paper and compiled a 'top 10' list. These 10 articles, which we recommend every biosensor user reads, describe well-performed kinetic, equilibrium and qualitative/screening studies, provide comparisons between binding parameters obtained from different biosensor users, as well as from biosensor- and solution-based interaction analyses, and summarize the cutting-edge applications of the technology. We also re-iterate some of the experimental pitfalls that lead to sub-optimal data and over-interpreted results. We are hopeful that the biosensor community, by applying the hints we outline, will obtain data on a par with that presented in the 10 spotlighted articles. This will ensure that the scientific community at large can be confident in the data we report from optical biosensors.