Event-specific plasmid standards and real-time PCR methods for transgenic Bt11, Bt176, and GA21 maize and transgenic GT73 canola

Quantitative real-time PCR analysis of four genetically modified soybean events using plasmid and genomic DNA calibrators

A calibration curve is required for reliable and accurate quantitative real-time PCR analysis of genetically modified (GM) organisms, necessitating the use of reference materials as calibrators. In this study, two types of DNA calibrators-plasmid DNA (pDNA) and genomic DNA (gDNA)-were used to quantify four GM soybean events (SYHT0H2, MON87751, DAS-44406-6, and DAS-81419-2). The PCR efficiency and linearity for the calibrators adhered to the CODEX guidelines. The conversion factor (Cf) was calculated as the ratio of copies of GM events to those of endogenous genes using the pDNA calibration curve. To assess the accuracy and repeatability of these assays, quantification at GM levels of 3% and 1% was performed. Based on our results, we believe that the pDNA calibrator assessed in this study can be used as a reference material for GMO quantitative analysis and can replace gDNA, especially considering the ease of management and advantages of mass production.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-023-01392-0.

A review on the identification of transgenic oilseeds and oils

Transgenic technology can increase the quantity and quality of vegetable oils worldwide. However, people are skeptical about the safety of transgenic oil-bearing crops and the oils they produce. In order to protect consumers' rights and avoid transgenic oils being adulterated or labeled as nontransgenic oils, the transgenic detection technology of oilseeds and oils needs careful consideration. This paper first summarized the current research status of transgenic technologies implemented at oil-bearing crops. Then, an inspection process was proposed to detect a large number of samples to be the subject rapidly, and various inspection strategies for transgenic oilseeds and oils were summarized according to the process sequence. The detection indicators included oil content, fatty acid, triglyceride, tocopherol, and nucleic acid. The detection technologies involved chromatography, spectroscopy, nuclear magnetic resonance, and polymerase chain reaction. It is hoped that this article can provide crucial technical reference and support for staff engaging in the supervision of transgenic food and for researchers developing fast and efficient monitoring methods in the future.

Distribution and genetic characterization of bird rape mustard (Brassica rapa) populations and analysis of glyphosate resistance introgression

BACKGROUND

The introgression of a transgene conferring glyphosate resistance from Brassica napus (rapeseed, canola) to Brassica rapa weeds (bird rape) was documented at a single location in 2007. In 2015, several cases of glyphosate resistant mustard were reported by growers in areas where rapeseed was seldom grown.

RESULTS

Survey result indicated glyphosate resistant bird rape mustard is present in areas where glyphosate tolerant corn and soybean are often grown in rotation. Genetic analyses reveal that hybridization followed by introgression and progressive loss of chromosome is the likely mechanism for the horizontal gene transfer (HGT) of glyphosate resistance.

CONCLUSION

Introgression of the glyphosate-resistance conferring transgene in the populations studied appears to have occurred several times, consistent with the ease for B. rapa to form hybrids with B. napus. The introduction of a transgene into a crop should therefore take into account the weediness of the species that share a common genome and their ability to form hybrids. We provide here such an example between B. napus and B. rapa, and potentially between B. napus and Raphanistrum raphanistrum. © 2022 Her Majesty the Queen in Right of Canada. Pest Management Science © 2022 Society of Chemical Industry. Reproduced with the permission of the Minister of Agriculture and Agri-Food Canada.

Transcriptomic and proteomic responses to brown plant hopper (Nilaparvata lugens) in cultivated and Bt-transgenic rice (Oryza sativa) and wild rice (O. rufipogon)

Strategies are still employed to reduce insect damage in crop production, including conventional breeding with wild germplasm resources and transgenic technology with foreign genes' insertion. Cultivated and Bt-transgenic rice (Oryza sativa) and two ecotypes of wild rice (O. rufipogon) were treated by a 72 h feeding of brown plant hopper (Nilaparvata lugens). Under the feeding of N. lugens, compared with the cultivated rice (568 and 4), more differentially expressed genes (DEGs) and differentially accumulated proteins (DAPs) were identified in transgenic rice (2098 and 11) and two wild ecotypes (1990, 39 and 1932, 25, respectively). The iTRAQ analysis showed 79 DAPs and confirmed the results of RNA-seq, which showed the least GO terms and KEGG pathways responding to herbivory in the cultivated rice. DAPs significantly enriched two GO terms that are related with Bph14 and Bph33 genes in rice. Most of DEGs and DAPs were related to plant biological processes of plant-pathogen interaction and plant hormone signal transduction, and hormone signaling and transcription factors regulate the immune response of rice to BPH. Our results demonstrated the similarity in the wild rice and Bt-transgenic rice for their transcriptomic and proteomic response to herbivory, while cultivated rice lacked enough pathways in response to herbivory. STATEMENT OF SIGNIFICANCE OF THE STUDY: The iTRAQ analysis and RNA-seq were employed 39 to identify differentially expressed genes (DEGs) and differentially accumulated proteins (DAPs) in seedlings of cultivated, Bt-transgenic and two wild rice ecotypes under feeding of brown plant hopper. Wild rice showed DEGs and DAPs related to biochemical pathways of plant pathogen interactions and plant hormone signal transductions, while cultivated rice lacked enough pathways in response to herbivory. Crop domestication weakened the response of plants to herbivory, while the insertion of Bt gene might promote the response of plants to herbivory. Growing environment plays an important role in regulating gene networks of plant response to herbivory. Our results highlighted the importance of conservation of crop wild species. SIGNIFICANCE: Insect damage is one of main factors in reducing agricultural production, and technologies and methods were employed to control insect pests in agricultural systems. Transgenic technology is developed to produce insect-resistant crops, but receive concerns on biosafety risks. Alternatively, crop wild species are important genetic resource in crop breeding to produce trait-specific varieties. Here, we investigated the molecular mechanisms of plant response to herbivory in wild, Bt-transgenic and cultivated rice, and found crop domestication weakened the response of plants to herbivory. The insertion of foreign Bt gene may promote the expression of other genes. In addition, our results showed growing environment plays an important role in regulating gene networks of plant response to herbivory. These results highlight the importance of wild species conservation, with the strategy of in situ conservation.

Effects of encapsulated essential oils and organic acids on laying performance, egg quality, intestinal morphology, barrier function, and microflora count of hens during the early laying period

The objective of this study was to investigate the effect of encapsulated essential oils and organic acids (EOA) on the growth performance, egg quality, intestinal morphology and functions, and microbial count of laying hens from week 21 to 30. A total of five hundred and four 21-wk-old layers were randomly allotted into 4 groups consisting of 7 replicates with 18 birds per replicate. The birds were fed a basic diet (CON) or diets with EOA at 150 mg/kg, 300 mg/kg, and 450 mg/kg in the other 3 groups, respectively. Compared to the CON group, the addition of 150 mg/kg EOA significantly increased laying rate (P < 0.05) of hens from week 21 to 25. A linear increasing (linear, P < 0.01) in ileal villus height of laying hens fed EOA from 150 to 300 mg/kg was observed at week 30. At week 25, the supplementation of 300 mg/kg EOA significantly increased (P < 0.05) mRNA relative expression of aminopeptidase, sodium-glucose cotransporter 1, and Na+-independent neutral amino acid transporter in duodenum and glucose transporter 2 in jejunum of laying hens compared to the CON groups. Meanwhile, the relative expression of glucose transporter 2 mRNA in the jejunum was upregulated with increasing concentration of EOA in diets (linear, P < 0.05). Hens in EOA 300 group had higher mRNA relative expression of mucin-2 in ileum (P < 0.05) than hens in CON group. Additionally, the secretory immunoglobulin in ileum A were linear decreased (linear, P < 0.01) with the increasing supplement of EOA. Dietary supplementation with EOA tended to increase (P = 0.083) the counts of Bifidobacterium in cecal digesta at week 25 and 30. In conclusion, dietary with EOA may maintain intestinal tract morphology and promote digestive and absorptive capacities and barrier function, especially at 300 mg/kg. This study provided evidence of using EOA as a potential feed additive for laying hens.

Panorama general de los organismos genéticamente modificados en Colombia y en el mundo: Capacidad nacional de detección

Los organismos genéticamente modificados (OGM) y en particular los cultivos genéticamente modificados (GM), son el resultado de la modificación de la información genética de una especie a partir del uso de la biotecnología moderna para proporcionar nuevas características que su contraparte no modificada no posee, tales como resistencia a insectos, tolerancia a herbicidas, contenido de nutrientes entre otros. La mayor parte de estos cultivos se concentran en cuatro productos: soya (Glycine max), maíz (Zea Mays), canola (Brassica napus) y algodón (Gossypium hirsutum); y los principales productores son Estados Unidos, Brasil, Argentina, India y Canadá. Por su parte, Colombia ocupa el puesto 18 con cultivos de maíz, algodón y claveles azules. La introducción de estas especies en cualquier mercado está limitada por la legislación propia del país destino, así como por los estudios que permiten establecer su efecto sobre el medio ambiente, la salud humana y animal; en este sentido, la precisión y confianza de las técnicas analíticas empleadas en la evaluación del contenido de OGM son un elemento importante para la toma de decisiones basadas en evidencias objetivas, especialmente frente al debate en torno a su uso. Este documento presenta una revisión de las tecnologías de análisis más importantes disponibles a nivel mundial, frente a las capacidades nacionales para su detección.

One Novel Multiple-Target Plasmid Reference Molecule Targeting Eight Genetically Modified Canola Events for Genetically Modified Canola Detection

Multiple-target plasmid DNA reference materials have been generated and utilized as good substitutes of matrix-based reference materials in the analysis of genetically modified organisms (GMOs). Herein, we report the construction of one multiple-target plasmid reference molecule, pCAN, which harbors eight GM canola event-specific sequences (RF1, RF2, MS1, MS8, Topas 19/2, Oxy235, RT73, and T45) and a partial sequence of the canola endogenous reference gene PEP. The applicability of this plasmid reference material in qualitative and quantitative PCR assays of the eight GM canola events was evaluated, including the analysis of specificity, limit of detection (LOD), limit of quantification (LOQ), and performance of pCAN in the analysis of various canola samples, etc. The LODs are 15 copies for RF2, MS1, and RT73 assays using pCAN as the calibrator and 10 genome copies for the other events. The LOQ in each event-specific real-time PCR assay is 20 copies. In quantitative real-time PCR analysis, the PCR efficiencies of all event-specific and PEP assays are between 91% and 97%, and the squared regression coefficients (R²) are all higher than 0.99. The quantification bias values varied from 0.47% to 20.68% with relative standard deviation (RSD) from 1.06% to 24.61% in the quantification of simulated samples. Furthermore, 10 practical canola samples sampled from imported shipments in the port of Shanghai, China, were analyzed employing pCAN as the calibrator, and the results were comparable with those assays using commercial certified materials as the calibrator. Concluding from these results, we believe that this newly developed pCAN plasmid is one good candidate for being a plasmid DNA reference material in the detection and quantification of the eight GM canola events in routine analysis.

Strategies to Evaluate the Safety of Bioengineered Foods

A number of genetically modified (GM) crops bioengineered to express agronomic traits including herbicide resistance and insect tolerance have been commercialized. Safety studies conducted for the whole grains and food and feed fractions obtained from GM crops (i.e., bioengineered foods) bear similarities to and distinctive differences from those applied to substances intentionally added to foods (e.g., food ingredients). Similarities are apparent in common animal models, route of exposure, duration, and response variables typically assessed in toxicology studies. However, because of differences in the nutritional and physical properties of food ingredients and bioengineered foods and in the fundamental goals of the overall safety assessment strategies for these different classes of substances, there are recognizable differences in the individual components of the safety assessment process. The fundamental strategic difference is that the process for food ingredients is structured toward quantitative risk assessment whereas that for bioengineered foods is structured for the purpose of qualitative risk assessment. The strategy for safety assessment of bioengineered foods focuses on evaluating the safety of the transgenic proteins used to impart the desired trait or traits and to demonstrate compositional similarity between the grains of GM and non-GM comparator crops using analytical chemistry and, in some cases, feeding studies. Despite these differences, the similarities in the design of safety studies conducted with bioengineered foods should be recognized by toxicologists. The current paper reviews the basic principles of safety assessment for bioengineered foods and compares them with the testing strategies applied to typical food ingredients. From this comparison it can be seen that the strategies used to assess the safety of bioengineered foods are at least as robust as that used to assess the safety of typical food ingredients.

Development and application of a general plasmid reference material for GMO screening

The use of analytical controls is essential when performing GMO detection through screening tests. Additionally, the presence of taxon-specific sequences is analyzed mostly for quality control during GMO detection. In this study, 11 commonly used genetic elements involving three promoters (P-35S, P-FMV35S and P-NOS), four marker genes (Bar, NPTII, HPT and Pmi), and four terminators (T-NOS, T-35S, T-g7 and T-e9), together with the reference gene fragments from six major crops of maize, soybean, rapeseed, rice, cotton and wheat, were co-integrated into the same single plasmid to construct a general reference plasmid pBI121-Screening. The suitability test of pBI121-Screening plasmid as reference material indicated that the non-target sequence on the pBI121-Screening plasmid did not affect the PCR amplification efficiencies of screening methods and taxon-specific methods. The sensitivity of screening and taxon-specific assays ranged from 5 to 10 copies of pBI121-Screening plasmid, meeting the sensitivity requirement of GMO detection. The construction of pBI121-Screening solves the lack of a general positive control for screening tests, thereby reducing the workload and cost of preparing a plurality of the positive control.

Structure of Exogenous Gene Integration and Event-Specific Detection in the Glyphosate-Tolerant Transgenic Cotton Line BG2-7

In this study, the flanking sequence of an inserted fragment conferring glyphosate tolerance on transgenic cotton line BG2-7 was analyzed by thermal asymmetric interlaced polymerase chain reaction (TAIL-PCR) and standard PCR. The results showed apparent insertion of the exogenous gene into chromosome D10 of the Gossypium hirsutum L. genome, as the left and right borders of the inserted fragment are nucleotides 61,962,952 and 61,962,921 of chromosome D10, respectively. In addition, a 31-bp cotton microsatellite sequence was noted between the genome sequence and the 5' end of the exogenous gene. In total, 84 and 298 bp were deleted from the left and right borders of the exogenous gene, respectively, with 30 bp deleted from the cotton chromosome at the insertion site. According to the flanking sequence obtained, several pairs of event-specific detection primers were designed to amplify sequence between the 5' end of the exogenous gene and the cotton genome junction region as well as between the 3' end and the cotton genome junction region. Based on screening tests, the 5'-end primers GTCATAACGTGACTCCCTTAATTCTCC/CCTATTACACGGCTATGC and 3'-end primers TCCTTTCGCTTTCTTCCCTT/ACACTTACATGGCGTCTTCT were used to detect the respective BG2-7 event-specific primers. The limit of detection of the former primers reached 44 copies, and that of the latter primers reached 88 copies. The results of this study provide useful data for assessment of BG2-7 safety and for accelerating its industrialization.

Current and new approaches in GMO detection: challenges and solutions

In many countries, genetically modified organisms (GMO) legislations have been established in order to guarantee the traceability of food/feed products on the market and to protect the consumer freedom of choice. Therefore, several GMO detection strategies, mainly based on DNA, have been developed to implement these legislations. Due to its numerous advantages, the quantitative PCR (qPCR) is the method of choice for the enforcement laboratories in GMO routine analysis. However, given the increasing number and diversity of GMO developed and put on the market around the world, some technical hurdles could be encountered with the qPCR technology, mainly owing to its inherent properties. To address these challenges, alternative GMO detection methods have been developed, allowing faster detections of single GM target (e.g., loop-mediated isothermal amplification), simultaneous detections of multiple GM targets (e.g., PCR capillary gel electrophoresis, microarray, and Luminex), more accurate quantification of GM targets (e.g., digital PCR), or characterization of partially known (e.g., DNA walking and Next Generation Sequencing (NGS)) or unknown (e.g., NGS) GMO. The benefits and drawbacks of these methods are discussed in this review.

Developing a matrix reference material for screening of transgenic rice

Certified reference materials (CRMs) that are compatible with detection methods are needed to detect genetically modified organisms (GMOs). Screening is the first detection step in determining the possible presence of GMO ingredients in food or feed; however, screening has been hindered by the lack of GMO CRMs. In this study, transgenic rice materials were developed via the transformation of a construct harboring 11 commonly used screening elements. Digital PCR was utilized to identify a homozygous single-copy line termed SDrice. The qualitative detections of 11 elements in 21 transgenic materials demonstrated that the genomic DNA of the SDrice was suitable for use as a positive control in the screening of GMO ingredients. The suitability of SDrice as reference material was further checked by testing the sensitivity of 11 known conventional PCR assays, ranging from 10 to 50 copies of the SDrice genome. The standard curves that were created using SDrice DNA series as calibrators all exhibited good linearities in the relationships of the Ct values with the template copy numbers in these 11 real-time PCR assays. The LODs of the real-time PCR assays were estimated to be two to five copies of the SDrice genome. Comparisons of the SDrice with other GM rice revealed that significant differences existed in both the intercepts of the standard curves and the ΔCt values of the exogenous and reference genes for the P-35S, T-nos, HPT, T-35S, and Bar assays; the SDrice was not fit for quantification of other GM rice events. This study provided a matrix reference material (RM) that was suitable for screening GM rice, determination of sensitivity and a LOD of PCR assays, and overcame some of the drawbacks of plasmid DNA as reference material.

An innovative and integrated approach based on DNA walking to identify unauthorised GMOs

In the coming years, the frequency of unauthorised genetically modified organisms (GMOs) being present in the European food and feed chain will increase significantly. Therefore, we have developed a strategy to identify unauthorised GMOs containing a pCAMBIA family vector, frequently present in transgenic plants. This integrated approach is performed in two successive steps on Bt rice grains. First, the potential presence of unauthorised GMOs is assessed by the qPCR SYBR®Green technology targeting the terminator 35S pCAMBIA element. Second, its presence is confirmed via the characterisation of the junction between the transgenic cassette and the rice genome. To this end, a DNA walking strategy is applied using a first reverse primer followed by two semi-nested PCR rounds using primers that are each time nested to the previous reverse primer. This approach allows to rapidly identify the transgene flanking region and can easily be implemented by the enforcement laboratories.

Sensitivity of a real-time PCR method for the detection of transgenes in a mixture of transgenic and non-transgenic seeds of papaya (Carica papaya L.)

BACKGROUND

Genetically engineered (GE) ringspot virus-resistant papaya cultivars 'Rainbow' and 'SunUp' have been grown in Hawai'i for over 10 years. In Hawai'i, the introduction of GE papayas into regions where non-GE cultivars are grown and where feral non-GE papayas exist have been accompanied with concerns associated with transgene flow. Of particular concern is the possibility of transgenic seeds being found in non-GE papaya fruits via cross-pollination. Development of high-throughput methods to reliably detect the adventitious presence of such transgenic material would benefit both the scientific and regulatory communities.

RESULTS

We assessed the accuracy of using conventional qualitative polymerase chain reaction (PCR) as well as real-time PCR-based assays to quantify the presence of transgenic DNA from bulk samples of non-GE papaya seeds. In this study, an optimized method of extracting high quality DNA from dry seeds of papaya was standardized. A reliable, sensitive real-time PCR method for detecting and quantifying viral coat protein (cp) transgenes in bulk seed samples utilizing the endogenous papain gene is presented. Quantification range was from 0.01 to 100 ng/μl of GE-papaya DNA template with a detection limit as low as 0.01% (10 pg). To test this system, we simulated transgene flow using known quantities of GE and non-GE DNA and determined that 0.038% (38 pg) GE papaya DNA could be detected using real-time PCR. We also validated this system by extracting DNA from known ratios of GE seeds to non-GE seeds of papaya followed by real-time PCR detection and observed a reliable detection limit of 0.4%.

CONCLUSIONS

This method for the quick and sensitive detection of transgenes in bulked papaya seed lots using conventional as well as real-time PCR-based methods will benefit numerous stakeholders. In particular, this method could be utilized to screen selected fruits from maternal non-GE papaya trees in Hawai'i for the presence of transgenic seed at typical regulatory threshold levels. Incorporation of subtle differences in primers and probes for variations in cp worldwide should allow this method to be utilized elsewhere when and if deregulation of transgenic papaya occurs.

A new dual plasmid calibrator for the quantification of the construct specific GM canola Oxy-235 with duplex real-time PCR

To overcome the difficulties of obtaining the Certified Reference Material (CRM) and according to the key documents of the European Union Reference Laboratory (EU-RL), a new standard reference molecule containing the construct specific of the canola event Oxy-235 (3'-junction Nitrilase/Tnos) and the canola endogenous reference gene (acety-CoA-carboxylase) was constructed and used for duplex real-time quantitative analysis. The limits of detection (LOD) were less than 5 Haploid Genome Copy (HGC) and the limits of quantification (LOQ) were about 10 HGC. Furthermore, mixed GM and non-GM canola samples were analysed with duplex QRT-PCR to evaluate the performance criteria as required for validation procedures in the EU-RL, namely, the precision and the accuracy. The accuracy expressed as bias ranged from 2% to 10% and the precision (repeatability and reproducibility) expressed as the RSDr and RSDR was from 2.2 to 5.12 and 2.15 to 5.46 respectively. All these indicated that the developed construct specific method and the reference molecule are suitable for the identification and the quantification of the canola event Oxy-235.

Development of plasmid DNA reference material for the quantification of genetically modified common bean embrapa 5.1

The genetically modified (GM) common bean Embrapa 5.1 was recently approved for commercialization. The reliable detection and quantification of GM organisms is strongly dependent on validated methods as well as calibration systems. This work presents the development of a calibrant plasmid for Embrapa 5.1 common bean detection. The reaction parameters were determined and compared for both the plasmid DNA (pDNA) and the genomic DNA (gDNA). PCR efficiencies for pDNA were 81% for the construction-specific assays and 76% for the taxon-specific assay, whereas for gDNA efficiencies were 94 and 93%, respectively. The limits of detection (LOD) in both qPCR assays were 10(2) and 10(3) copies of gDNA and pDNA per PCR reaction, respectively. This is sufficient to detect 0.067 and 0.67% of GM common bean in 100 ng of DNA, respectively, which is in agreement with detecting the 1% GM content required by the Brazilian legislation.

Relative quantification in seed GMO analysis: state of art and bottlenecks

Reliable quantitative methods are needed to comply with current EU regulations on the mandatory labeling of genetically modified organisms (GMOs) and GMO-derived food and feed products with a minimum GMO content of 0.9 %. The implementation of EU Commission Recommendation 2004/787/EC on technical guidance for sampling and detection which meant as a helpful tool for the practical implementation of EC Regulation 1830/2003, which states that "the results of quantitative analysis should be expressed as the number of target DNA sequences per target taxon specific sequences calculated in terms of haploid genomes". This has led to an intense debate on the type of calibrator best suitable for GMO quantification. The main question addressed in this review is whether reference materials and calibrators should be matrix based or whether pure DNA analytes should be used for relative quantification in GMO analysis. The state of the art, including the advantages and drawbacks, of using DNA plasmid (compared to genomic DNA reference materials) as calibrators, is widely described. In addition, the influence of the genetic structure of seeds on real-time PCR quantitative results obtained for seed lots is discussed. The specific composition of a seed kernel, the mode of inheritance, and the ploidy level ensure that there is discordance between a GMO % expressed as a haploid genome equivalent and a GMO % based on numbers of seeds. This means that a threshold fixed as a percentage of seeds cannot be used as such for RT-PCR. All critical points that affect the expression of the GMO content in seeds are discussed in this paper.

Detection and identification of genetically modified EE-1 brinjal (Solanum melongena) by single, multiplex and SYBR® real-time PCR

BACKGROUND

Brinjal is an important vegetable crop. Major crop loss of brinjal is due to insect attack. Insect-resistant EE-1 brinjal has been developed and is awaiting approval for commercial release. Consumer health concerns and implementation of international labelling legislation demand reliable analytical detection methods for genetically modified (GM) varieties.

RESULTS

End-point and real-time polymerase chain reaction (PCR) methods were used to detect EE-1 brinjal. In end-point PCR, primer pairs specific to 35S CaMV promoter, NOS terminator and nptII gene common to other GM crops were used. Based on the revealed 3' transgene integration sequence, primers specific for the event EE-1 brinjal were designed. These primers were used for end-point single, multiplex and SYBR-based real-time PCR. End-point single PCR showed that the designed primers were highly specific to event EE-1 with a sensitivity of 20 pg of genomic DNA, corresponding to 20 copies of haploid EE-1 brinjal genomic DNA. The limits of detection and quantification for SYBR-based real-time PCR assay were 10 and 100 copies respectively.

CONCLUSION

The prior development of detection methods for this important vegetable crop will facilitate compliance with any forthcoming labelling regulations.

Construction of a reference plasmid containing ten targets for the detection of genetically modified crops

Standard reference molecules play a significant role for the detection of genetically modified (GM) crops and products. The newest reference molecules should catch up with the rapid development of GM crops in the world. In this work, a reference plasmid containing ten targets from GM soybean, maize and cotton was constructed on the basis of the pTLE8 harboring eight targets only from GM soybean and cotton. Three target segments of the Bt176 event-specific 3'-junction (Bt176G3'), MON810 event-specific 3'-junction (MON810G3') and the endogenous maize Hmg genes, were fused into the 890 bp fragment by overlap extension PCR. The CP4 EPSPS gene in the plasmid pTLE8 previously constructed in our laboratory was replaced with above fusion fragment, thus generating a new plasmid pTLH10 containing ten target genes from GM soybean, maize and cotton. The PCR efficiencies with pTLH10 as a calibrator ranged from 93.3% to 99.9% for the standard curves of the Bt176G3', MON810G3' and Hmg genes. The standard deviation (SD) values of repeatability were from 0.04 to 0.8 for three different days and from 0.12 to 1.14 for one day, respectively. These results indicated that the reference plasmid constructed in this work is also suitable for the identification of GM maize, and would be an important tool to establish a feasible identification management for various GM crops components.

Genome walking in eukaryotes

Genome walking is a molecular procedure for the direct identification of nucleotide sequences from purified genomes. The only requirement is the availability of a known nucleotide sequence from which to start. Several genome walking methods have been developed in the last 20 years, with continuous improvements added to the first basic strategies, including the recent coupling with next generation sequencing technologies. This review focuses on the use of genome walking strategies in several aspects of the study of eukaryotic genomes. In a first part, the analysis of the numerous strategies available is reported. The technical aspects involved in genome walking are particularly intriguing, also because they represent the synthesis of the talent, the fantasy and the intelligence of several scientists. Applications in which genome walking can be employed are systematically examined in the second part of the review, showing the large potentiality of this technique, including not only the simple identification of nucleotide sequences but also the analysis of large collections of mutants obtained from the insertion of DNA of viral origin, transposons and transfer DNA (T-DNA) constructs. The enormous amount of data obtained indicates that genome walking, with its large range of applicability, multiplicity of strategies and recent developments, will continue to have much to offer for the rapid identification of unknown sequences in several fields of genomic research.

Real-time polymerase chain reaction method for detecting contamination of beef by material from genetically engineered cattle

Prion protein knockout (PRNP(-/-)) cattle have been developed and may be used to produce bovine material such as serum, collagen, and gelatin. However, genetically engineered animals (GE animals) must not be imported or made commercially available in Japan, because they are not authorized for food use in Japan. We used real-time polymerase chain reaction (real-time PCR) to develop method of detection for neomycin- and the puromycin-resistance genes in beef samples. Plasmids containing the neomycin-resistance gene and the puromycin-resistance gene were used as standard reference molecules. The results clearly showed that the method we developed is capable of quantitatively detecting the neomycin- and the puromycin-resistance genes in the plasmids in the presence of genomic DNA extracted from a beef sample. We also applied the method to testing of beef samples imported from the United States (U.S.). This method will make it possible to monitor beef for contamination by material from GE cattle to assure food safety.

Characterization of the exogenous insert and development of event-specific PCR detection methods for genetically modified Huanong No. 1 papaya

Genetically modified (GM) papaya (Carica papaya L.), Huanong No. 1, was approved for commercialization in Guangdong province, China in 2006, and the development of the Huanong No. 1 papaya detection method is necessary for implementing genetically modified organism (GMO) labeling regulations. In this study, we reported the characterization of the exogenous integration of GM Huanong No. 1 papaya by means of conventional polymerase chain reaction (PCR) and thermal asymmetric interlaced (TAIL)-PCR strategies. The results suggested that one intact copy of the initial construction was integrated in the papaya genome and which probably resulted in one deletion (38 bp in size) of the host genomic DNA. Also, one unintended insertion of a 92 bp truncated NptII fragment was observed at the 5' end of the exogenous insert. Furthermore, we revealed its 5' and 3' flanking sequences between the insert DNA and the papaya genomic DNA, and developed the event-specific qualitative and quantitative PCR assays for GM Huanong No. 1 papaya based on the 5' integration flanking sequence. The relative limit of detection (LOD) of the qualitative PCR assay was about 0.01% in 100 ng of total papaya genomic DNA, corresponding to about 25 copies of papaya haploid genome. In the quantitative PCR, the limits of detection and quantification (LOD and LOQ) were as low as 12.5 and 25 copies of papaya haploid genome, respectively. In practical sample quantification, the quantified biases between the test and true values of three samples ranged from 0.44% to 4.41%. Collectively, we proposed that all of these results are useful for the identification and quantification of Huanong No. 1 papaya and its derivates.

Testing for genetically modified organisms (GMOs): Past, present and future perspectives

This paper presents an overview of GMO testing methodologies and how these have evolved and may evolve in the next decade. Challenges and limitations for the application of the test methods as well as to the interpretation of results produced with the methods are highlighted and discussed, bearing in mind the various interests and competences of the involved stakeholders. To better understand the suitability and limitations of detection methodologies the evolution of transformation processes for creation of GMOs is briefly reviewed.

Simultaneous detection of eight genetically modified maize lines using a combination of event- and construct-specific multiplex-PCR technique

To fulfill labeling and traceability requirement of genetically modified (GM) maize for trade and regulation, it is essential to develop an event-specific detection method for monitoring the presence of transgenes. In pursuit of this purpose, we systematically optimized and established a combined event- and construct-specific multiplex polymerase chain reaction (mPCR) technique for simultaneous detection of 8 GM maize lines. Altogether 9 sets of primers were designed, including six that were event-specific for Event176, Bt11, TC1507, NK603, MON863, and Mon810; two that were construct-specific for T25 and GA21, and one for an endogenous zein gene. The transgene in each GM maize line and the endogenous zein gene could be clearly detected and distinguished according to the different sizes of PCR amplicons. The limit of detection (LOD) was approximately 0.25% (v/v), although the detection can be as sensitive as 0.1% as demonstrated by the International Seed Testing Association (ISTA) proficiency test. This study further improves the current PCR-based detection method for GM maize. The method can be used in an easy, sensitive, and cost and time effective way for the identification and quality screening of a specific GM maize line.