Molecular breeding of tomato lines for mass production of miraculin in a plant factory

Effects of different light intensity on the growth of tomato seedlings in a plant factory

Light-emitting diodes (LEDs) were the best artificial light source for plant factories. Red light-emitting diodes (LEDs, R) and blue light-emitting diodes (LEDs, B) were used to obtain different light intensities of uniform spectra, and the greenhouse environment was considered as a comparison. The results showed that root dry weight, shoot dry weight and stem diameter were superior in plant growth under 240 μmolm-2s-1, additionally, the Dixon Quality Index (DQI) was also best. Under 240 μmolm-2s-1, the net photosynthesis rate (Pn) was consistent with the greenhouse's treatment, superior to other experimental groups. The results implied that the PPFD was more suitable for the cultivation of tomato seedlings under the condition of 240 μmolm-2s-1, and can replace the greenhouse conditions so as to save energy and reduce emissions.

EMS-induced mutagenesis in Choy sum (Brassica chinensis var. parachinensis) and selection for low light tolerance using abiotic stress indices

BACKGROUND

Choy Sum (Brassica rapa ssp. chinensis var. parachinensis), grown in a controlled environment, is vulnerable to changes in indoor light quality and displays distinct photo-morphogenesis responses. The scarcity of Choy Sum germplasm for indoor cultivation necessitates the development of new cultivars. Hence, this study attempted to develop mutants through chemical mutagenesis and select low-light-tolerant mutants by using abiotic stress tolerance indices.

RESULTS

A mutant population of Choy Sum created using 1.5% ethyl methane sulfonate (EMS) at 4 h was manually pollinated to obtain the M2 generation. 154 mutants with reduced hypocotyl length were initially isolated from 3600 M2 seedlings screened under low light (R: FR = 0.5). Five mutants that showed reduced plant height at mature stages were selected and screened directly for shade tolerance in the M3 generation. Principal component analysis based on phenotypic data distinguished the M3 mutants from the wild type. Abiotic stress tolerance indices such as relative stress index (RSI), stress tolerance index (STI), geometric mean productivity (GMP), yield stability index (YSI), and stress resistance index (SRI) showed significant (P < 0.05), and positive associations with leaf yield under shade. M3-12-2 was selected as a shade-tolerant mutant based on high values of STI, YSI, and SRI with low values for tolerance (TOL) and stress susceptibility index (SSI).

CONCLUSIONS

The results demonstrate that mutation breeding can be used to create dominant mutants in Choy Sum. Furthermore, we show that screening for low light and selection based on abiotic tolerance indices allowed the identification of mutants with high resilience under shade. This method should apply to developing new cultivars in other crop plants that can be suitable for controlled environments with stable yield performance.

Transfer of Anthocyanin Accumulating Delila and Rosea1 Genes from the Transgenic Tomato Micro-Tom Cultivar to Moneymaker Cultivar by Conventional Breeding

Delila and Rosea1 anthocyanin accumulation genes were subjected to bioinformatics analysis. Delila protein has 56-69% similarity with different anthocyanin-rich plants, while Rosea1 protein has 83-87% with anthocyanin-rich plant proteins. This study aimed at transferring Delila and Rosea1 genes from the transgenic Micro-tom tomato cultivar to the Moneymaker tomato cultivar using traditional breeding for enhancing their fruit anthocyanin content. Results of all produced F1 plants of manual hybridization between both cultivars were consistent with the Mendelian inheritance hypothesis. Plants of F2 populations showed a 3:1 Mendelian segregation proportion (75% of plants have anthocyanin pigmentation). Seeds of F2 were individually cultured to get four homozygous lines with anthocyanin accumulation in fruits. The total anthocyanin in the anthocyanin-enriched inbred fruit (3 g/kg DM) represented a relative increase of about 131% of the parent level. The total phenolic compounds in inbred tomato fruits were 54.9 mg/100 g DM referring to a relative increase of about 51% of the respective parent plant. The antioxidant activity of inbred fruit at maturity (m) was 83.5% compared with 91% for TBHQ. The inbred (m) tomato fruit extract reduced the growth of G^- bacteria G⁺ bacteria by 99% and 95%, respectively.

Breeding new varieties for controlled environments

Agricultural production in controlled environments is increasingly feasible, and may play an important role in providing nutrition and choice to growing urban centres. New technologies in lighting, ventilation, robotics and irrigation are just a few of the innovations that enable production of high-value specialty crops outside of a traditional field setting. However, despite all of the advances in the hardware within the plant factory operation, innovation of the most complex machine has been neglected - the plant itself. Indoor agricultural operations typically rely on legacy varieties, plants selected and bred for field conditions. In the field, phenotypic stability is paramount, as production must be consistent in an unpredictable and changing environment. However, the controlled environment affords focus on different breeding priorities as environmental flux, pests, pathogens and post-harvest quality are less formidable barriers to production. On the contrary, breeding for controlled environments shifts the focus to a completely different set of plant traits, such as rapid growth, performance in low light environments and active manipulation of plant stature. Instead of breeding for phenotypic stability, plants may be bred to maximise genetic plasticity, allowing specific traits to be presented as a function of the quality of the ambient light spectrum. In this scenario plant varieties may be grown with optimal size, supporting a focus on consumer traits like flavour or accumulation of health-related compounds. Gene editing may be a central technology in the production of designer plants for controlled environments. This review considers the opportunity for breeding for controlled environments, with a focus on a revision of priorities for controlled-environment breeders.

Vertical farming increases lettuce yield per unit area compared to conventional horizontal hydroponics

Vertical farming systems (VFS) have been proposed as an engineering solution to increase productivity per unit area of cultivated land by extending crop production into the vertical dimension. To test whether this approach presents a viable alternative to horizontal crop production systems, a VFS (where plants were grown in upright cylindrical columns) was compared against a conventional horizontal hydroponic system (HHS) using lettuce (Lactuca sativa L. cv. "Little Gem") as a model crop. Both systems had similar root zone volume and planting density. Half-strength Hoagland's solution was applied to plants grown in perlite in an indoor controlled environment room, with metal halide lamps providing artificial lighting. Light distribution (photosynthetic photon flux density, PPFD) and yield (shoot fresh weight) within each system were assessed. Although PPFD and shoot fresh weight decreased significantly in the VFS from top to base, the VFS produced more crop per unit of growing floor area when compared with the HHS. Our results clearly demonstrate that VFS presents an attractive alternative to horizontal hydroponic growth systems and suggest that further increases in yield could be achieved by incorporating artificial lighting in the VFS.

Molecular Breeding to Create Optimized Crops: From Genetic Manipulation to Potential Applications in Plant Factories

Crop cultivation in controlled environment plant factories offers great potential to stabilize the yield and quality of agricultural products. However, many crops are currently unsuited to these environments, particularly closed cultivation systems, due to space limitations, low light intensity, high implementation costs, and high energy requirements. A major barrier to closed system cultivation is the high running cost, which necessitates the use of high-margin crops for economic viability. High-value crops include those with enhanced nutritional value or containing additional functional components for pharmaceutical production or with the aim of providing health benefits. In addition, it is important to develop cultivars equipped with growth parameters that are suitable for closed cultivation. Small plant size is of particular importance due to the limited cultivation space. Other advantageous traits are short production cycle, the ability to grow under low light, and high nutriculture availability. Cost-effectiveness is improved from the use of cultivars that are specifically optimized for closed system cultivation. This review describes the features of closed cultivation systems and the potential application of molecular breeding to create crops that are optimized for cost-effectiveness and productivity in closed cultivation systems.

Induction of a dwarf phenotype with IBH1 may enable increased production of plant-made pharmaceuticals in plant factory conditions

Year-round production in a contained, environmentally controlled 'plant factory' may provide a cost-effective method to produce pharmaceuticals and other high-value products. However, cost-effective production may require substantial modification of the host plant phenotype; for example, using dwarf plants can enable the growth of more plants in a given volume by allowing more plants per shelf and enabling more shelves to be stacked vertically. We show here that the expression of the chimeric repressor for Arabidopsis AtIBH1 (P35S:AtIBH1SRDX) in transgenic tobacco plants (Nicotiana tabacum) induces a dwarf phenotype, with reduced cell size. We estimate that, in a given volume of cultivation space, we can grow five times more AtIBH1SRDX plants than wild-type plants. Although, the AtIBH1SRDX plants also showed reduced biomass compared with wild-type plants, they produced about four times more biomass per unit of cultivation volume. To test whether the dwarf phenotype affects the production of recombinant proteins, we expressed the genes for anti-hepatitis B virus antibodies (anti-HBs) in tobacco plants and found that the production of anti-HBs per unit fresh weight did not significantly differ between wild-type and AtIBH1SRDX plants. These data indicate that P35S:AtIBH1SRDX plants produced about fourfold more antibody per unit of cultivation volume, compared with wild type. Our results indicate that AtIBH1SRDX provides a useful tool for the modification of plant phenotype for cost-effective production of high-value products by stably transformed plants in plant factory conditions.

Improving Light Distribution by Zoom Lens for Electricity Savings in a Plant Factory with Light-Emitting Diodes

The high energy consumption of a plant factory is the biggest issue in its rapid expansion, especially for lighting electricity, which has been solved to a large extent by light-emitting diodes (LED). However, the remarkable potential for further energy savings remains to be further investigated. In this study, an optical system applied just below the LED was designed. The effects of the system on the growth and photosynthesis of butterhead lettuce (Lactuca sativa var. capitata) were examined, and the performance of the optical improvement in energy savings was evaluated by comparison with the traditional LED illumination mode. The irradiation patterns used were LED with zoom lenses (Z-LED) and conventional non-lenses LED (C-LED). The seedlings in both treatments were exposed to the same light environment over the entire growth period. The improvement saved over half of the light source electricity, while prominently lowering the temperature. Influenced by this, the rate of photosynthesis sharply decreased, causing reductions in plant yield and nitrate content, while having no negative effects on morphological parameters and photosynthetic pigment contents. Nevertheless, the much higher light use efficiency of Z-LEDs makes this system a better approach to illumination in a plant factory with artificial lighting.

Optimization of conditions for the single step IMAC purification of miraculin from Synsepalum dulcificum

In this study, the methods for extraction and purification of miraculin from Synsepalum dulcificum were investigated. For extraction, the effect of different extraction buffers (phosphate buffer saline, Tris-HCl and NaCl) on the extraction efficiency of total protein was evaluated. Immobilized metal ion affinity chromatography (IMAC) with nickel-NTA was used for the purification of the extracted protein, where the influence of binding buffer pH, crude extract pH and imidazole concentration in elution buffer upon the purification performance was explored. The total amount of protein extracted from miracle fruit was found to be 4 times higher using 0.5M NaCl as compared to Tris-HCl and phosphate buffer saline. On the other hand, the use of Tris-HCl as binding buffer gave higher purification performance than sodium phosphate and citrate-phosphate buffers in IMAC system. The optimum purification condition of miraculin using IMAC was achieved with crude extract at pH 7, Tris-HCl binding buffer at pH 7 and the use of 300 mM imidazole as elution buffer, which gave the overall yield of 80.3% and purity of 97.5%. IMAC with nickel-NTA was successfully used as a single step process for the purification of miraculin from crude extract of S. dulcificum.

Essences in metabolic engineering of lignan biosynthesis

Lignans are structurally and functionally diverse phytochemicals biosynthesized in diverse plant species and have received wide attentions as leading compounds of novel drugs for tumor treatment and healthy diets to reduce of the risks of lifestyle-related non-communicable diseases. However, the lineage-specific distribution and the low-amount of production in natural plants, some of which are endangered species, hinder the efficient and stable production of beneficial lignans. Accordingly, the development of new procedures for lignan production is of keen interest. Recent marked advances in the molecular and functional characterization of lignan biosynthetic enzymes and endogenous and exogenous factors for lignan biosynthesis have suggested new methods for the metabolic engineering of lignan biosynthesis cascades leading to the efficient, sustainable, and stable lignan production in plants, including plant cell/organ cultures. Optimization of light conditions, utilization of a wide range of elicitor treatments, and construction of transiently gene-transfected or transgenic lignan-biosynthesizing plants are mainly being attempted. This review will present the basic and latest knowledge regarding metabolic engineering of lignans based on their biosynthetic pathways and biological activities, and the perspectives in lignan production via metabolic engineering.

Single-LED solar simulator for amorphous Si and dye-sensitized solar cells

Smallest sun: single LED solar simulator that shows high quality simulated solar spectrum in accordance with the AM1.5G standard has been developed.

An E8 promoter-HSP terminator cassette promotes the high-level accumulation of recombinant protein predominantly in transgenic tomato fruits: a case study of miraculin

The E8 promoter-HSP terminator expression cassette is a powerful tool for increasing the accumulation of recombinant protein in a ripening tomato fruit. Strong, tissue-specific transgene expression is a desirable feature in transgenic plants to allow the production of variable recombinant proteins. The expression vector is a key tool to control the expression level and site of transgene and recombinant protein expression in transgenic plants. The combination of the E8 promoter, a fruit-ripening specific promoter, and a heat shock protein (HSP) terminator, derived from heat shock protein 18.2 of Arabidopsis thaliana, produces the strong and fruit-specific accumulation of recombinant miraculin in transgenic tomato. Miraculin gene expression was driven by an E8 promoter and HSP terminator cassette (E8-MIR-HSP) in transgenic tomato plants, and the miraculin concentration was the highest in the ripening fruits, representing 30-630 μg miraculin of the gram fresh weight. The highest level of miraculin concentration among the transgenic tomato plant lines containing the E8-MIR-HSP cassette was approximately four times higher than those observed in a previous study using a constitutive 35S promoter and NOS terminator cassette (Hiwasa-Tanase et al. in Plant Cell Rep 30:113-124, 2011). These results demonstrate that the combination of the E8 promoter and HSP terminator cassette is a useful tool to increase markedly the accumulation of recombinant proteins in a ripening fruit-specific manner.

From miracle fruit to transgenic tomato: mass production of the taste-modifying protein miraculin in transgenic plants

The utility of plants as biofactories has progressed in recent years. Some recombinant plant-derived pharmaceutical products have already reached the marketplace. However, with the exception of drugs and vaccines, a strong effort has not yet been made to bring recombinant products to market, as cost-effectiveness is critically important for commercialization. Sweet-tasting proteins and taste-modifying proteins have a great deal of potential in industry as substitutes for sugars and as artificial sweeteners. The taste-modifying protein, miraculin, functions to change the perception of a sour taste to a sweet one. This taste-modifying function can potentially be used not only as a low-calorie sweetener but also as a new seasoning that could be the basis of a new dietary lifestyle. However, miraculin is far from inexpensive, and its potential as a marketable product has not yet been fully developed. For the last several years, biotechnological production of this taste-modifying protein has progressed extensively. In this review, the characteristics of miraculin and recent advances in its production using transgenic plants are summarized, focusing on such topics as the suitability of plant species as expression hosts, the cultivation method for transgenic plants, the method of purifying miraculin and future advances required to achieve industrial use.

Ubiquitin promoter-terminator cassette promotes genetically stable expression of the taste-modifying protein miraculin in transgenic lettuce

Lettuce is a commercially important leafy vegetable that is cultivated worldwide, and it is also a target crop for plant factories. In this study, lettuce was selected as an alternative platform for recombinant miraculin production because of its fast growth, agronomic value, and wide availability. The taste-modifying protein miraculin is a glycoprotein extracted from the red berries of the West African native shrub Richadella dulcifica. Because of its limited natural availability, many attempts have been made to produce this protein in suitable alternative hosts. We produced transgenic lettuce with miraculin gene driven either by the ubiquitin promoter/terminator cassette from lettuce or a 35S promoter/nos terminator cassette. Miraculin gene expression and miraculin accumulation in both cassettes were compared by quantitative real-time PCR analysis, Western blotting, and enzyme-linked immunosorbent assay. The expression level of the miraculin gene and protein in transgenic lettuce was higher and more genetically stable in the ubiquitin promoter/terminator cassette than in the 35S promoter/nos terminator cassette. These results demonstrated that the ubiquitin promoter/terminator cassette is an efficient platform for the genetically stable expression of the miraculin protein in lettuce and hence this platform is of benefit for recombinant miraculin production on a commercial scale.

The HSP terminator of Arabidopsis thaliana induces a high level of miraculin accumulation in transgenic tomatoes

High-level accumulation of the target recombinant protein is a significant issue in heterologous protein expression using transgenic plants. Miraculin, a taste-modifying protein, was accumulated in transgenic tomatoes using an expression cassette in which the miraculin gene was expressed by the cauliflower mosaic virus (CaMV) 35S promoter and the heat shock protein (HSP) terminator (MIR-HSP). The HSP terminator was derived from heat shock protein 18.2 in Arabidopsis thaliana . Using this HSP-containing cassette, the miraculin concentration in T0 transgenic tomato lines was 1.4-13.9% of the total soluble protein (TSP), and that in the T1 transgenic tomato line homozygous for the miraculin gene reached 17.1% of the TSP. The accumulation level of the target protein was comparable to levels observed with chloroplast transformation. The high-level accumulation of miraculin in T0 transgenic tomato lines achieved by the HSP terminator was maintained in the successive T1 generation, demonstrating the genetic stability of this accumulation system.

A trial of production of the plant-derived high-value protein in a plant factory: photosynthetic photon fluxes affect the accumulation of recombinant miraculin in transgenic tomato fruits

One of the ultimate goals of plant science is to test a hypothesis obtained by basic science and to apply it to agriculture and industry. A plant factory is one of the ideal systems for this trial. Environmental factors affect both plant yield and the accumulation of recombinant proteins for industrial applications within transgenic plants. However, there have been few reports studying plant productivity for recombinant protein in closed cultivation systems called plant factories. To investigate the effects of photosynthetic photon flux (PPF) on tomato fruit yield and the accumulation of recombinant miraculin, a taste-modifying glycoprotein, in transgenic tomato fruits, plants were cultivated at various PPFs from 100 to 400 (µmol m(-2) s(-)1) in a plant factory. Miraculin production per unit of energy used was highest at PPF100, although miraculin production per unit area was highest at PPF300. The commercial productivity of recombinant miraculin in transgenic tomato fruits largely depended on light conditions in the plant factory. Our trial will be useful to consider the trade-offs between the profits from production of high-value materials in plants and the costs of electricity.

Double loss-of-function mutation in EARLY FLOWERING 3 and CRYPTOCHROME 2 genes delays flowering under continuous light but accelerates it under long days and short days: an important role for Arabidopsis CRY2 to accelerate flowering time in continuous light

The photoperiodic response is one of the adaptation mechanisms to seasonal changes of lengths of day and night. The circadian clock plays pivotal roles in this process. In Arabidopsis, LHY, CCA1, ELF3, and other clock proteins play major roles in maintaining circadian rhythms. lhy;cca1 double mutants with severe defects in circadian rhythms showed accelerated flowering under short days (SDs), but delayed flowering under continuous light (LL). The protein level of the floral repressor SVP increased in lhy;cca1 mutants under LL, and the late-flowering phenotype of lhy;cca1 mutants was partially suppressed by svp, flc, or elf3. ELF3 interacted with both CCA1 and SVP, and elf3 suppressed the SVP accumulation in lhy;cca1 under LL. These results suggest that the unique mechanism of the inversion of the flowering response of lhy;cca1 under LL may involve both the ELF3-SVP/FLC-dependent and -independent pathways. In this work, elf3-1 seeds were mutagenized with heavy-ion beams and used to identify mutation(s) that delayed flowering under LL but not long days (LDs) or SDs even without ELF3. In this screening, seven candidate lines named suppressor of elf3 1 (self1), sel3, sel5, sel7, sel14, sel15, and sel20 were identified. Genetic analysis indicated that sel20 was a new deletion allele of a mutation in the blue light receptor, CRY2. A late-flowering phenotype and decrease of FT expression in the elf3;sel20 double mutant was obvious under LL but not under SDs or LDs. These results indicated that the late-flowering phenotype in the double mutant elf3;sel20 as well as in lhy;cca1 was affected by the presence of darkness. The results suggest that CRY2 may play more essential roles in the acceleration of flowering under LL than LDs or SDs.

Uniform accumulation of recombinant miraculin protein in transgenic tomato fruit using a fruit-ripening-specific E8 promoter

The E8 promoter, a tomato fruit-ripening-specific promoter, and the CaMV 35S promoter, a constitutive promoter, were used to express the miraculin gene encoding the taste-modifying protein in tomato. The accumulation of miraculin protein and mRNA was compared among transgenic tomatoes expressing the miraculin gene driven by these promoters. Recombinant miraculin protein predominantly accumulated in transgenic tomato lines using the E8 promoter (E8-MIR) only at the red fruit stage. The accumulations were almost uniform among all fruit tissues. When the 35S promoter (35S-MIR) was used, miraculin accumulation in the exocarp was much higher than in other tissues, indicating that the miraculin accumulation pattern can be regulated by using different types of promoters. We also discuss the potential of the E8-MIR lines for practical use.