Advances in nonfouling materials: perspectives for the food industry

High Antifouling Performance of Weakly Hydrophilic Polymer Brushes: A Molecular Dynamics Study

The antifouling performance of polymer brushes usually improves with increasing hydrophilicity of the grafted polymer. However, in some cases, less hydrophilic polymers show comparable or better antifouling performance than do more hydrophilic polymers. We investigate the mechanism of this anomalous behavior using molecular dynamics (MD) simulations of coarse-grained (CG) models of weakly and strongly hydrophilic polymers. The antifouling performance is evaluated from the potential of mean force of a model protein. The strongly hydrophilic polymer exhibits a better antifouling performance than the weakly hydrophilic polymer when the substrate of the polymer brush is repulsive. However, when the substrate is sufficiently attractive, the weakly hydrophilic polymer brush becomes more effective than the strongly hydrophilic brush in a certain range of grafting density. This is because the weakly hydrophilic polymer chains form a tightly packed layer that prevents the adsorbate molecule from contacting the substrate. We also perform all-atom (AA) MD simulations for several standard polymers to examine the correspondence with the CG polymer models. The weakly hydrophilic CG polymer is found to be similar to poly[N-(2-hydroxypropyl)methacrylamide] and poly(2-hydroxyethyl methacrylate), both of which have a hydroxyl group in a monomer unit. The strongly hydrophilic CG polymer resembles zwitterionic poly(carboxybetaine methacrylate). A discussion referring to the adsorption free energies of proteins on surfaces calculated in previous AA MD studies suggests that the higher antifouling performance of less hydrophilic polymer brushes can be realized for various combinations of protein and surface.

Durable Surface Modification of Low-Density Polyethylene/Nano-Silica Composite Films with Bacterial Antifouling and Liquid-Repelling Properties for Food Hygiene and Safety

The growing prevalence of antimicrobial resistance in bacterial strains has increased the demand for preventing biological deterioration on the surfaces of films used in applications involving food contact materials (FCMs). Herein, we prepared superhydrophobic film surfaces using a casting process that involved the combination of low-density polyethylene (LDPE) with solutions containing surface energy-reducing silica (SRS). The bacterial antifouling properties of the modified film surfaces were evaluated using Escherichia coli O157:H7 and Staphylococcus epidermidis via the dip-inoculation technique. The reduction in bacterial populations on the LDPE film embedded with SRS was confirmed to be more than 2 log-units, which equates to over 99%, when compared to the bare LDPE film. Additionally, the modified film demonstrated liquid-repelling properties against food-related contaminants, such as blood, beverages, and sauces. Moreover, the modified film demonstrated enhanced durability and robustness compared to one of the prevalent industry methods, dip-coating. We anticipate that the developed LDPE/nano-silica composite film represents a promising advancement in the multidisciplinary aspects of food hygiene and safety within the food industry, particularly concerning FCMs.

Molecular Dynamics Study of the Antifouling Mechanism of Hydrophilic Polymer Brushes

We perform all-atom molecular dynamics simulations of the adsorption of amino acid side-chain analogues on polymer brushes. The analogues examined are nonpolar isobutane, polar propionamide, negatively charged propionate ion, and positively charged butylammonium ion. The polymer brushes consist of a sheet of graphene and strongly hydrophilic poly(carboxybetaine methacrylate) (PCBMA) or weakly hydrophilic poly(2-hydroxyethyl methacrylate) (PHEMA). The effective interactions between isobutane and polymer chains are repulsive for PCBMA and attractive for PHEMA. Gibbs energy decomposition analysis shows that this is due to the abundance of water in the PCBMA brush, which increases the steric repulsion and decreases the Lennard-Jones attraction. The affinity of the hydrophilic analogues is low for both PCBMA and PHEMA chains, but the balance between the components of the Gibbs energy is different for the two polymers. The simulations are performed at several θ, where θ is the degree of overlap of polymer chains. The antifouling performance against the neutral analogues is better for PCBMA than for PHEMA in the low and high θ regimes. However, in the middle θ regime, the antifouling performance of PHEMA is close to or better than that of PCBMA. This is attributed to the formation of a dense layer of PHEMA on the graphene surface that inhibits direct adsorption of analogue molecules on graphene. The charged analogues do not bind to either the PHEMA or PCBMA brush irrespective of θ.

Effect of the crosslinking agent on the biorepulsive and mechanical properties of polyglycerol membranes

Polyglycerol (PG) based surfaces materials and surfaces are well-established bio-compatible materials. Crosslinking of the dendrimeric molecules via their OH groups improves their mechanical stability up to the point that free-standing materials can be attained. Here, we investigate the effect of different crosslinkers on PG films regarding their biorepulsivity and mechanical properties. For this purpose, PG films with different thicknesses (15, 50 and 100 nm) were prepared by polymerizing glycidol in a ring-opening polymerization onto hydroxyl-terminated Si substrates. These films were then crosslinked using ethylene glycol diglycidyl ether (EGDGE), divinyl sulfone (DVS), glutaraldehyde (GA), 1,11-di(mesyloxy)-3,6,9-trioxaundecane (TEG-Ms₂) or 1,11-dibromo-3,6,9-trioxaundecane (TEG-Br₂), respectively. While DVS, TEG-Ms₂, and TEG-Br₂ resulted in slightly thinned films, presumably due to loss of unbound material, increase of film thickness was observed with GA and, in particular, EDGDE, what can be explained by the different crosslinking mechanisms. The biorepulsive properties of the crosslinked PG films were characterized by water contact angle (WCA) goniometry and various adsorption assays involving proteins (serum albumine, fibrinogen, γ-globulin) and bacteria (E. coli), showing that some crosslinkers (EGDGE, DVS) improved the biorepulsive properties, while others deteriorated them (TEG-Ms₂, TEG-Br₂, GA). As the crosslinking stabilized the films, it was possible to use a lift-off procedure to obtain free-standing membranes if the thickness of the films was 50 nm or larger. Their mechanical properties were examined with a bulge test showing high elasticities, with the Young's moduli increasing in the order GA ≈ EDGDE < TEG-Br₂ ≈ TEG-Ms₂ < DVS.

Innovative Antibacterial, Photocatalytic, Titanium Dioxide Microstructured Surfaces Based on Bacterial Adhesion Enhancement

Bacterial colonization and biofilm formation are found on nearly all wet surfaces, representing a serious problem for both human healthcare and industrial applications, where traditional treatments may not be effective. Herein, we describe a synergistic approach for improving the performance of antibacterial surfaces based on microstructured surfaces that embed titanium dioxide nanoparticles (TiO₂ NPs). The surfaces were designed to enhance bacteria entrapment, facilitating their subsequent eradication by a combination of UVC disinfection and TiO₂ NPs photocatalysis. The efficacy of the engineered TiO₂-modified microtopographic surfaces was evaluated using three different designs, and it was found that S2-lozenge and S3-square patterns had a higher concentration of trapped bacteria, with increases of 70 and 76%, respectively, compared to flat surfaces. Importantly, these surfaces showed a significant reduction (99%) of viable bacteria after just 30 min of irradiation with UVC 254 nm light at low intensity, being sixfold more effective than flat surfaces. Overall, our results showed that the synergistic effect of combining microstructured capturing surfaces with the chemical functionality of TiO₂ NPs paves the way for developing innovative and efficient antibacterial surfaces with numerous potential applications in the healthcare and biotechnology market.

A Molecular Theory of Polypeptide Adsorption at Inorganic Surfaces

A faithful description of polypeptide adsorption at ionizable surfaces remains a theoretical challenge from a molecular perspective due to the strong coupling of local thermodynamic nonideality and ionizations of both the adsorbate and substrate that are sensitive to the solution condition such as pH, ion valence, and salt concentration. Building upon a recently developed coarse-grained model for natural amino acids in bulk electrolyte solutions, here we report a molecular theory applicable to polypeptide adsorption on ionizable inorganic surfaces over a broad range of inhomogeneous conditions. Our thermodynamic model is able to account for diverse solution effects as well as the amino-acid sequence on polypeptide adsorption and surface association such as hydrogen bonding or bidentate coordination. The theoretical predictions have been validated by extensive comparison with experimental data for the adsorption isotherms of three representative polypeptides at a titanium surface.

A critical review on surface modifications mitigating dairy fouling

Thermal treatments performed in food processing industries generate fouling. This fouling deposit impairs heat transfer mechanism by creating a thermal resistance, thus leading to regular shutdown of the processes. Therefore, periodic and harsh cleaning-in-place (CIP) procedures are implemented. This CIP involves the use of chemicals and high amounts of water, thus increasing environmental burden. It has been estimated that 80% of production costs are owed to dairy fouling deposit. Since the 1970s, different types of surface modifications have been performed either to prevent fouling deposition (anti-fouling) or to facilitate removal (fouling-release). This review points out the impacts of surface modification on type A dairy fouling and on cleaning behaviors under batch and continuous flow conditions. Both types of anti-fouling and fouling-release coatings are reported as well as the different techniques used to modify stainless steel surface. Finally, methods for testing and characterising the effectiveness of coatings in mitigating dairy fouling are discussed.

Recent developments in antimicrobial and antifouling coatings to reduce or prevent contamination and cross-contamination of food contact surfaces by bacteria

Illness as the result of ingesting bacterially contaminated foodstuffs represents a significant annual loss of human quality of life and economic impact globally. Significant research investment has recently been made in developing new materials that can be used to construct food contacting tools and surfaces that might minimize the risk of cross-contamination of bacteria from one food item to another. This is done to mitigate the spread of bacterial contamination and resultant foodborne illness. Internet-based literature search tools such as Web of Science, Google Scholar, and Scopus were utilized to investigate publishing trends within the last 10 years related to the development of antimicrobial and antifouling surfaces with potential use in food processing applications. Technologies investigated were categorized into four major groups: antimicrobial agent-releasing coatings, contact-based antimicrobial coatings, superhydrophobic antifouling coatings, and repulsion-based antifouling coatings. The advantages for each group and technical challenges remaining before wide-scale implementation were compared. A diverse array of emerging antimicrobial and antifouling technologies were identified, designed to suit a wide range of food contact applications. Although each poses distinct and promising advantages, significant further research investment will likely be required to reliably produce effective materials economically and safely enough to equip large-scale operations such as farms, food processing facilities, and kitchens.

The Roles of Membrane Technology in Artificial Organs: Current Challenges and Perspectives

The recent outbreak of the COVID-19 pandemic in 2020 reasserted the necessity of artificial lung membrane technology to treat patients with acute lung failure. In addition, the aging world population inevitably leads to higher demand for better artificial organ (AO) devices. Membrane technology is the central component in many of the AO devices including lung, kidney, liver and pancreas. Although AO technology has improved significantly in the past few decades, the quality of life of organ failure patients is still poor and the technology must be improved further. Most of the current AO literature focuses on the treatment and the clinical use of AO, while the research on the membrane development aspect of AO is relatively scarce. One of the speculated reasons is the wide interdisciplinary spectrum of AO technology, ranging from biotechnology to polymer chemistry and process engineering. In this review, in order to facilitate the membrane aspects of the AO research, the roles of membrane technology in the AO devices, along with the current challenges, are summarized. This review shows that there is a clear need for better membranes in terms of biocompatibility, permselectivity, module design, and process configuration.

Comparison of Protein-Repellent Behavior of Linear versus Dendrimer-Structured Surface-Immobilized Polymers

For many biomedical applications, material surfaces should not only prevent unspecific protein adsorption and bacterial attachment as in many other applications in the food, health, or marine industry, but they should also promote the adhesion of tissue cells. In order to take a first step toward the challenging development of protein and bacteria-repelling and cell-adhesion-promoting materials, polyamine and poly(amido amine) surface coatings with terminal amine groups and varying structure (dendrimer, oligomer, polymer) were immobilized on model surfaces via silane chemistry. Physicochemical analysis showed that all modifications are hydrophilic (contact angles <60°) and possess similar surface free energies (SFEs, ∼46-54 mN/m), whereas their amine group densities and zeta potentials at physiological conditions (pH 7.4) varied greatly (-50 to +75 mV). In protein adsorption experiments with single proteins (human serum albumin (HSA) and lysozyme) as well as complex physiological fluids (fetal bovine serum (FBS) and human saliva), the amounts of adsorbed protein were found to correlate strongly with the zeta potential of the surface coatings. Both modifications based on linear polymers exhibited good protein repellency toward all proteins examined and are thus promising for testing in cell adhesion studies.

Antimicrobial and antifouling polymeric coating mitigates persistence of Pseudomonas aeruginosa biofilm

Food wasted due to food spoilage remains a global challenge to the environmental sustainability and security of food supply. In food manufacturing, post-processing contamination of food can occur due to persistent bacterial biofilms, which can be resistant to conventional cleaning and sanitization. The objective was to characterize the efficacy of a polymeric coating in reducing Pseudomonas aeruginosa biofilm establishment and facilitating its removal. Viable cell density of a 48 h biofilm was reduced by 2.10 log cfu cm^-2 on the coated surface, compared to native polypropylene. Confocal laser scanning and electron microscopy indicated reductions in mature biofilm viability and thickness on the coated material. The antifouling coating improved cleanability, with ∼2.5 log cfu cm^-2 of viable cells remaining after 105 min cleaning by water at 65 °C, compared to 4.5 log cfu cm^-2 remaining on native polypropylene. Such coatings may reduce the persistence of biofilms in food processing environments, in support of reducing food spoilage and waste.

Electric Assisted Salt-Responsive Bacterial Killing and Release of Polyzwitterionic Brushes in Low-Concentration Salt Solution

Polyzwitterionic brushes with strong antipolyelectrolyte effects have shown great potential as versatile platforms for the development of switchable friction/lubrication and bacterial absorption/desorption surfaces. However, the surface property switches of these brushes are usually triggered by high salt concentrations (>0.53 M), thereby greatly limiting their applications in biological fields where the salt concentration for mammals is ?0.15 M. To solve this problem, an electric field was used to assist the salt-responsive process of the polyzwitterionic brushes to achieve bacterial release at low concentrations of the salt solution. Briefly, poly(3-(dimethyl (4-vinylbenzyl) ammonium) propyl sulfonate) (polyDVBAPS) brushes grafted on ITO surfaces were prepared by surface initiated atom transfer radical polymerization. The bacterial release of this surface was conducted under an electric field, where anions were migrated and enriched around the brush-grafted ITO surface as anode. The local high concentration ion led to the conformation change of the brush and release of the attached bacteria. The effect of salt type, salt concentration, electric field strength, and conducting time on the bacterial release properties were investigated. The results indicated that under an electrical field of 3 V/mm, polyDVBAPS showed release capacities of ?93% for E. coli and ?81% for S. aureus in 0.12 M NaCl electrolyte solution. Furthermore, by the introduction of a bactericidal agent, i.e., Triclosan (TCS), an antibacterial surface with dual functions of killing and release was fabricated. This surface could kill ?90% and release 95% of attached E. coli in a 0.12 M NaCl solution by the application of a 3 V/mm electric field. This work demonstrated the feasibility of triggering a salt-responsive behavior of polyzwitterionic at low salt concentration by assistance of electric field, which would greatly extend the applications of polyzwitterionic, in particular in biological applications.

Responsive and Synergistic Antibacterial Coatings: Fighting against Bacteria in a Smart and Effective Way

Antibacterial coatings that eliminate initial bacterial attachment and prevent subsequent biofilm formation are essential in a number of applications, especially implanted medical devices. Although various approaches, including bacteria-repelling and bacteria-killing mechanisms, have been developed, none of them have been entirely successful due to their inherent drawbacks. In recent years, antibacterial coatings that are responsive to the bacterial microenvironment, that possess two or more killing mechanisms, or that have triggered-cleaning capability have emerged as promising solutions for bacterial infection and contamination problems. This review focuses on recent progress on three types of such responsive and synergistic antibacterial coatings, including i) self-defensive antibacterial coatings, which can "turn on" biocidal activity in response to a bacteria-containing microenvironment; ii) synergistic antibacterial coatings, which possess two or more killing mechanisms that interact synergistically to reinforce each other; and iii) smart "kill-and-release" antibacterial coatings, which can switch functionality between bacteria killing and bacteria releasing under a proper stimulus. The design principles and potential applications of these coatings are discussed and a brief perspective on remaining challenges and future research directions is presented.

Host-guest self-assembly toward reversible visible-light-responsive switching for bacterial adhesion

Here we report a facile method to construct reversible visible-light-responsive switching from antibacterial to bioadhesion by host-guest self-assembly of β-cyclodextrin (β-CD) and azobenzene functionalized polycation/polyanion. The visible-light-responsible azobenzene functionalized polycation, poly{6-[(2,6-dimethoxyphenyl)azo-4-(2',6'-dimethoxy)phenoxy]propyl dimethylaminoethyl methacrylate-random-poly(2-(N,N-dimethylaminoethyl) methacrylate) (Azo-PDMAEMA), was synthesized via quaternization reaction between 2,6,2',6'-tetramethoxy-4-(3-bromopropoxy)azobenzene (AzoOMeBr) and poly(2-(N,N-dimethylaminoethyl) methacrylate) (PDMAEMA), and the polyanion, poly{6-[(2,6-dimethoxyphenyl)azo-4-(2',6'-dimethoxy) phenoxy]hexyl acrylate-random-acrylic acid} (Azo-PAA), was synthesized via esterification reaction between 2,6,2',6'-tetramethoxy-4-(6-hydroxyhexyloxy) azobenzene (AzoOMeOH) and poly(acryloyl chloride) (PAC) and subsequent hydrolysis reactions. The switch surface could be achieved via the alternate host-guest assembly of Azo-PDMAEMA and Azo-PAA onto a β-CD-terminated substratum (Sub-CD) through visible light irradiation. The positively charged Azo-PDMAEMA with quaternary ammonium groups exhibited antimicrobial properties and few bacteria were adhered on the surface, while the negatively charged Azo-PAA with carboxyl acid groups exhibited excellent bioadhesive properties and a large number of bacteria were adhered. Interestingly, the switch between antibacterial and bioadhesive could be realized upon visible light irradiation via alternate assembly of Azo-PDMAEMA and Azo-PAA. The proposed approach to manufacturing visible-light-responsive surface with reversible and alterable biofunctionality switching between antibacterial and bioadhesive is simple and efficient, which is promising for preparation of multifunctional polymeric surfaces to encounter multifarious demands for the biomedical and biotechnological applications.

STATEMENT OF SIGNIFICANCE

Light has attracted great attention in building biointerfaces for its precise spatiotemporal control and convenient operation. However, UV light may damage to biological samples and living tissues, which will limit its applications. This study demonstrates a novel visible-light-responsive surface fabricated through reversible assembly of azobenzene functionalized polycations/polyanions on cyclodextrin (CD)-terminated substrate by host-guest interactions between the visible-light-responsive azobenzene mAzo and CD, which has not been examined previously. It is noted that the azobenzene functionalized polycations show strong antibacterial activities, while the polyanions show excellent bioadhesive properties, as can be switched through the alternate assembly upon visible-light irradiation. This facile and versatile approach to visible-light-responsive surfaces holds great potential for switching of bioadhesion.

Surface and anti-fouling properties of a polyampholyte hydrogel grafted onto a polyethersulfone membrane

Zwitterion polymers have anti-fouling properties; therefore, grafting new zwitterions to surfaces, particularly as hydrogels, is one of the leading research directions for preventing fouling. Specifically, polyampholytes, polymers of random mixed charged subunits with a net-electric charge, offer a synthetically easy alternative for studying new zwitterions with a broad spectrum of charged moieties. Here, a novel polyampholyte hydrogel was grafted onto the surface of polyethersulfone membrane by copolymerizing a mixture of vinylsulfonic acid (VSA) and [2-(methacryloyloxy)ethyl]trimethylammonium chloride (METMAC) as the negatively and positively charged monomers, respectively, using various monomer ratios in the polymerization solution, and with N,N'-methylenebisacrylamide as the crosslinker. The physicochemical, morphological and anti-fouling properties of the modified membranes were systematically investigated. Hydrophilic hydrogels were successfully grafted using monomers at different molar ratios. A thin-film zwitterion hydrogel (∼90 nm) was achieved at a 3:1 [VSA:METMAC] molar ratio in the polymerization solution. Among all examined membranes, the zwitterion polyampholyte-modified membrane demonstrated the lowest adsorption of proteins, humic acid, and sodium alginate. It also had low fouling and high flux recovery following filtration with a protein or with an extracellular polymeric substance solution. These findings suggest that this polyampholyte hydrogel is applicable as a low fouling surface coating.

Binary Colloidal Crystal Layers as Platforms for Surface Patterning of Puroindoline-Based Antimicrobial Peptides

The ability of bacteria to form biofilms and the emergence of antibiotic-resistant strains have prompted the need to develop the next generation of antibacterial coatings. Antimicrobial peptides (AMPs) are showing promise as molecules that can address these issues, especially if used when immobilized as a surface coating. We present a method that explores how surface patterns together with the selective immobilization of an AMP called PuroA (FPVTWRWWKWWKG-NH₂) can be used to both kill bacteria and also as a tool to study bacterial attachment mechanisms. Surface patterning is achieved using stabilized self-assembled binary colloidal crystal (BCC) layers, allowing selective PuroA immobilization to carboxylated particles using N-(3-dimethylaminopropyl)-N'-ethyl carbodiimide (EDC) hydrochloride/N-hydroxysuccinimide (NHS) coupling chemistry. Covalent immobilization of PuroA was compared with physical adsorption (i.e., without the addition of EDC/NHS). The AMP-functionalized colloids and BCC layers were characterized by X-ray photoelectron spectroscopy, ζ potentials, and matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). Surface antimicrobial activity was assessed by viability assays using Escherichia coli. MALDI-TOF MS analysis revealed that although not all of PuroA was successfully covalently immobilized, a relatively low density of PuroA (1.93 × 10¹³ molecules/cm² and 7.14 × 10¹² molecules/cm² for covalent and physical immobilization, respectively) was found to be sufficient at significantly decreasing the viability of E. coli by 70% when compared to that of control samples. The findings provide a proof of concept that BCC layers are a suitable platform for the patterned immobilization of AMPs and the importance of ascertaining the success of small-molecule grafting reactions using surface-MALDI, something that is often assumed to be successful in the field.

A highly efficient bactericidal surface based on the co-capture function and photodynamic sterilization

Bacterial infection is posing a great threat to human life, and constructing a platform to capture or kill the bacteria attached on a material surface is of particular significance.

Multifunctional and Regenerable Antibacterial Surfaces Fabricated by a Universal Strategy

Development of a versatile strategy for antibacterial surfaces is of great scientific interest and practical significance. However, few methods can be used to fabricate antibacterial surfaces on substrates of different chemistries and structures. In addition, traditional antibacterial surfaces may suffer problems related to the attached dead bacteria. Herein, antibacterial surfaces with multifunctionality and regenerability are fabricated by a universal strategy. Various substrates are first deposited with multilayered films containing guest moieties, which can be further used to incorporate biocidal host molecules, β-cyclodextrin (β-CD) derivatives modified with quaternary ammonium salt groups (CD-QAS). The resulting surfaces exhibit strong biocidal activity to kill more than 95% of attached pathogenic bacteria. Notably, almost all the dead bacteria can be easily removed from the surfaces by simple immersion in sodium dodecyl sulfate, and the regenerated surfaces can be treated with new CD-QAS for continued use. Moreover, when another functional β-CD derivative molecule is co-incorporated together with CD-QAS, the surfaces exhibit both functions simultaneously, and neither specific biofunction and antibacterial activity is compromised by the presence of the other. These results thus present a promising way to fabricate multifunctional and regenerable antibacterial surfaces on diverse materials and devices in the biomedical fields.

Antibacterial surfaces based on poly(cationic liquid) brushes: switchability between killing and releasing via anion counterion switching

The development of a smart antibacterial surface that can both kill attached live bacteria and release dead bacteria is reported. The surface consists of counterion-responsive poly(cationic liquid) brushes of poly(1-(2-methacryloyloxyhexyl)-3-methylimidazolium bromide) (PIL(Br)), the properties of which can be switched repeatedly between bacterial killing and bacterial release. Upon counter-anion exchange of PIL(Br) chains using lithium bis(trifluoromethanesulfonyl) amide (LiTf₂N) to yield PIL(Tf₂N), the wettability of the surface changes from hydrophilic (water contact angle ∼52°) to hydrophobic (∼97°). The PIL(Br) chains adopt an extended conformation with bactericidal properties. Counter-anion switching to PIL(Tf₂N) gives a collapsed chain conformation allowing the release of killed bacteria. The switchable killing and releasing actions of the surface were maintained over three cycles. Thus it is concluded that PIL(Br) layers provide a viable approach for the fabrication of "smart" antibacterial surfaces.

A versatile approach towards multi-functional surfaces via covalently attaching hydrogel thin layers

In this study, a robust and straightforward method to covalently attach multi-functional hydrogel thin layers onto substrates was provided. In our strategy, double bonds were firstly introduced onto substrates to provide anchoring points for hydrogel layers, and then hydrogel thin layers were prepared via surface cross-linking copolymerization of the immobilized double bonds with functional monomers. Sulfobetaine methacrylate (SBMA), sodium allysulfonate (SAS), and methyl acryloyloxygen ethyl trimethyl ammonium chloride (METAC) were selected as functional monomers to form hydrogel layers onto polyether sulfone (PES) membrane surfaces, respectively. The thickness of the formed hydrogel layers could be controlled, and the layers showed excellent long-term stability. The PSBMA hydrogel layer exhibited superior antifouling property demonstrated by undetectable protein adsorption and excellent bacteria resistant property; after attaching PSAS hydrogel layer, the membrane showed incoagulable surface property when contacting with blood confirmed by the activated partial thromboplastin time (APTT) value exceeding 600s; while, the PMETAC hydrogel thin layer could effectively kill attached bacteria. The proposed method provides a new platform to directly modify material surfaces with desired properties, and thus has great potential to be widely used in designing materials for blood purification, drug delivery, wound dressing, and intelligent biosensors.

Design and mechanisms of antifouling materials for surface plasmon resonance sensors

Surface plasmon resonance (SPR) biosensors have many possible applications, but are limited by sensor chip surface fouling, which blocks immobilization and specific binding by the recognizer elements. Therefore, there is a pressing need for the development of antifouling surfaces. In this paper, the mechanisms of antifouling materials were firstly discussed, including both theories (hydration and steric hindrance) and factors influencing antifouling effects (molecular structures and self-assembled monolayer (SAM) architectures, surface charges, molecular hydrophilicity, and grafting thickness and density). Then, the most recent advances in antifouling materials applied on SPR biosensors were systematically reviewed, together with the grafting strategies, antifouling capacity, as well as their merits and demerits. These materials included, but not limited to, zwitterionic compounds, polyethylene glycol-based, and polysaccharide-based materials. Finally, the prospective research directions in the development of SPR antifouling materials were discussed.

STATEMENT OF SIGNIFICANCE

Surface plasmon resonance (SPR) is a powerful tool in monitoring biomolecular interactions. The principle of SPR biosensors is the conversion of refractive index change caused by molecular binding into resonant spectral shifts. However, the fouling on the surface of SPR gold chips is ubiquitous and troublesome. It limits the application of SPR biosensors by blocking recognition element immobilization and specific binding. Hence, we write this paper to review the antifouling mechanisms and the recent advances of the design of antifouling materials that can improve the accuracy and sensitivity of SPR biosensors. To our knowledge, this is the first review focusing on the antifouling materials that were applied or had potential to be applied on SPR biosensors.

Pattern Formation by Staphylococcus epidermidis via Droplet Evaporation on Micropillars Arrays at a Surface

We evaluate the effect of epoxy surface structuring on the evaporation of water droplets containing Staphylococcus epidermidis (S. epidermidis). During evaporation, droplets with S. epidermidis cells yield to complex wetting patterns such as the zipping-wetting1-3 and the coffee-stain effects. Depending on the height of the microstructure, the wetting fronts propagate circularly or in a stepwise manner, leading to the formation of octagonal or square-shaped deposition patterns.4,5 We observed that the shape of the dried droplets has considerable influence on the local spatial distribution of S. epidermidis deposited between micropillars. These changes are attributed to an unexplored interplay between the zipping-wetting1 and the coffee-stain6 effects in polygonally shaped droplets containing S. epidermidis. Induced capillary flows during evaporation of S. epidermidis are modeled with polystyrene particles. Bacterial viability measurements for S. epidermidis show high viability of planktonic cells, but low biomass deposition on the microstructured surfaces. Our findings provide insights into design criteria for the development of microstructured surfaces on which bacterial propagation could be controlled, limiting the use of biocides.

Vapor-based grafting of crosslinked poly(N-vinyl pyrrolidone) coatings with tuned hydrophilicity and anti-biofouling properties

Vapor-based one-step synthesis and grafting of poly(N-vinyl pyrrolidone) enable potent and durable anti-biofouling coatings with tailored structures.

A strategy for constructing anti-adhesion surfaces based on interfacial thiol–ene photoclick chemistry between DOPA derivatives with a catechol anchor group and zwitterionic betaine macromolecules

A novel route to construct stable anti-adhesion surfaces was explored via click chemistry between the anti-adhesion macromolecules and the anchoring compound DMA to various substrates.

Bacterial attachment and biofilm formation on surfaces are reduced by small-diameter nanoscale pores: how small is small enough?

BACKGROUND/OBJECTIVES

Prevention of biofilm formation by bacteria is of critical importance to areas that directly affect human health and life including medicine, dentistry, food processing and water treatment. This work showcases an effective and affordable solution for reducing attachment and biofilm formation by several pathogenic bacteria commonly associated with foodborne illnesses and medical infections.

METHODS

Our approach exploits anodisation to create alumina surfaces with cylindrical nanopores with diameters ranging from 15 to 100 nm, perpendicular to the surface. The anodic surfaces were evaluated for attachment by Escherichia coli, Listeria monocytogenes, Staphylococcus aureus and Staphylococcus epidermidis. Cell-surface interaction forces were calculated and related to attachment.

RESULTS

We found that anodic alumina surfaces with pore diameters of 15 and 25 nm were able to effectively minimise bacterial attachment or biofilm formation by all the microorganisms tested. Using a predictive physicochemical approach on the basis of the extended Derjaguin and Landau, Verwey and Overbeek (XDLVO) theory, we attributed the observed effects largely to the repulsive forces, primarily electrostatic and acid-base forces, which were greatly enhanced by the large surface area originating from the high density, small-diameter pores. We also demonstrate how this predictive approach could be used to optimise different elements of surface topography, particularly pore diameter and density, for further enhancing the observed bacteria-repelling effects.

CONCLUSIONS

We demonstrate that anodic nanoporous surfaces can effectively reduce bacterial attachment. These findings are expected to have immediate, far-reaching implications and commercial applications, primarily in health care and the food industry.

Conjugation of Hyaluronic Acid onto Surfaces via the Interfacial Polymerization of Dopamine to Prevent Protein Adsorption

A versatile, convenient, and cost-effective method that can be used for grafting antifouling materials onto different surfaces is highly desirable in many applications. Here, we report the one-step fabrication of antifouling surfaces via the polymerization of dopamine and the simultaneous deposition of anionic hyaluronic acid (HA) on Au substrates. The water contact angle of the Au surfaces decreased from 84.9° to 24.8° after the attachment of a highly uniform polydopamine (PDA)/HA hybrid film. The results of surface plasmon resonance analysis showed that the Au-PDA/HA surfaces adsorbed proteins from solutions of bovine serum albumin, lysozyme, β-lactoglobulin, fibrinogen, and soybean milk in ultralow or low amounts (4.8-31.7 ng/cm(2)). The hydrophilicity and good antifouling performance of the PDA/HA surfaces is attributable to the HA chains that probably attached onto their upper surface via hydrogen bonding between PDA and HA. At the same time, the electrostatic repulsion between PDA and HA probably prevents the aggregation of PDA, resulting in the formation of a highly uniform PDA/HA hybrid film with the HA chains (with a stretched structure) on the upper surface. We also developed a simple method for removing this PDA/HA film and recycling the Au substrates by using an aqueous solution of NaOH as the hydrolyzing agent. The Au surface remained undamaged, and a PDA/HA film could be redeposited on the surface, with the surface exhibiting good antifouling performance even after 10 such cycles. Finally, it was found that this grafting method is applicable to other substrates, including epoxy resins, polystyrene, glass, and steel, owing to the strong adhesion of PDA with these substrates.

Dual-function antibacterial surfaces for biomedical applications

Bacterial attachment and the subsequent formation of biofilm on surfaces of synthetic materials pose a serious problem in both human healthcare and industrial applications. In recent decades, considerable attention has been paid to developing antibacterial surfaces to reduce the extent of initial bacterial attachment and thereby to prevent subsequent biofilm formation. Briefly, there are three main types of antibacterial surfaces: bactericidal surfaces, bacteria-resistant surfaces, and bacteria-release surfaces. The strategy adopted to develop each type of surface has inherent advantages and disadvantages; many efforts have been focused on the development of novel antibacterial surfaces with dual functionality. In this review, we highlight the recent progress made in the development of dual-function antibacterial surfaces for biomedical applications. These surfaces are based on the combination of two strategies into one system, which can kill attached bacteria as well as resisting or releasing bacteria. Perspectives on future research directions for the design of dual-function antibacterial surfaces are also provided.