Functional polysaccharides as edible coatings for cheese

The effect of conventional and ohmic heating as pasteurization methods on the mechanical and rheological properties of edible whey-based films

Edible film-forming solutions typically undergo thermal treatment to ensure microbial safety before being applied to food products. The aim of this study was to assess the effects of two different heating methods-conventional heating (CH) and ohmic heating (OH)-on the physical, chemical, and microbiological properties of liquid acid whey permeate (AWP) and liquid acid whey protein concentrate (AWPC) edible films. Composition of edible film-forming solutions consisted of AWPC, sunflower oil, sugar beet pectin, and glycerol, whereas AWP-based films were produced with sugar beet pectin and glycerol. The following parameters were tested to assess the effect of heating treatments on the film-forming solutions: rheology, contact angle [CA] and microbial counts and mechanical properties (tensile strength [TS] and elongation at break [EB]), water vapor permeability [WVP], moisture content [MC], solubility (Sol), and thickness with optical properties of produced edible films. In addition, film surface was investigated by scanning electron microscopy [SEM]. Microbiological analysis of the untreated film-forming solutions revealed that the AWPC-based solution had a higher initial load of lactic acid bacteria (3.96 log10 CFU/mL) (p < 0.05). Both heating treatments successfully reduced microbial counts to below detection limits in both film-forming solutions. Additionally, OH treatment resulted in lower CA values in both solutions (p < 0.05). OH also led to an increase in TS for AWP-based edible films (p < 0.05) and significantly reduced the thickness of both AWP and AWPC films, while reducing the Sol of AWP-based films and increasing the Sol of AWPC-based films (p < 0.05). The study highlights the effectiveness of the two pasteurization methods and offers insights into improving whey-based edible films.

Flaxseed (Linum usitatissimum) mucilage: A versatile stimuli-responsive functional biomaterial for pharmaceuticals and healthcare

The present review is novel as it discusses the main findings of researchers on the topic and their implications, as well as highlights the emerging research in this particular area and its future prospective. The seeds of Flax (Linum usitatissimum) extrude mucilage (FSM) that has a diverse and wide range of applications, especially in the food industry and as a pharmaceutical ingredient. FSM has been blended with several food and dairy products to improve gelling ability, optical properties, taste, and user compliance. The FSM is recognized as a foaming, encapsulating, emulsifying, suspending, film-forming, and gelling agent for several pharmaceutical preparations and healthcare materials. Owing to stimuli (pH) -responsive swelling-deswelling characteristics, high swelling indices at different physiological pHs of the human body, and biocompatibility, FSM is considered a smart material for intelligent, targeted, and controlled drug delivery applications through conventional and advanced drug delivery systems. FSM has been modified through carboxymethylation, acetylation, copolymerization, and electrostatic complexation to get the desired properties for pharma, food, and healthcare products. The present review is therefore devoted to the isolation techniques, structural characterization, highly valuable properties for food and pharmaceutical industries, preclinical and clinical trials, pharmacological aspects, biomedical attributes, and patents of FSM.

Preparation of pH-responsive chitosan microspheres containing aminopeptidase and their application in accelerating cheese ripening

Microencapsulated enzymes have been found to effectively accelerate cheese ripening. However, microencapsulated enzyme release is difficult to control, often resulting in enzyme release during cheese processing and causing texture and flavor defects. This study aims to address this issue by developing aminopeptidase-loaded pH-responsive chitosan microspheres (A-CM) for precise enzyme release during cheese ripening. An aminopeptidase with an isoelectric point (pH 5.4) close to the pH value of cheese ripening was loaded on chitosan microspheres through electrostatic interaction. Turbidity titration measurements revealed that pH 6.5 was optimal for binding aminopeptidase and microspheres, affording the highest loading efficiency of 58.16%. Various characterization techniques, including scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Fourier-transform infrared spectroscopy confirmed the successful loading of aminopeptidase molecules on the chitosan microspheres. In vitro release experiments conducted during simulated cheese production demonstrated that aminopeptidase release from A-CM was pH responsive. The microspheres retained the enzyme during the coagulation and cheddaring processes (pH 5.5-6.5) and only released it after entering the cheese-ripening stage (pH 5.0-5.5). By loading aminopeptidase on chitosan microspheres, the loss rate of the enzyme in cheese whey was reduced by approximately 79%. Furthermore, compared with cheese without aminopeptidase and cheese with aminopeptidase added directly, the cheeses made with A-CM exhibited the highest proteolysis level and received superior sensory ratings for taste and smell. The content of key aroma substances, such as 2/3-methylbutanal and ethyl butyrate, in cheese with A-CM was more than 15 times higher than the others. This study provides an approach for accelerating cheese ripening through the use of microencapsulated enzymes.

The Microbial Diversity on the Surface of Smear-Ripened Cheeses and Its Impact on Cheese Quality and Safety

Smear-ripened cheeses are characterized by a viscous, red-orange surface smear on their rind. It is the complex surface microbiota on the cheese rind that is responsible for the characteristic appearance of this cheese type, but also for the wide range of flavors and textures of the many varieties of smear-ripened cheeses. The surface smear microbiota also represents an important line of defense against the colonization with undesirable microorganisms through various types of interaction, such as competitive exclusion or production of antimicrobial substances. Predominant members of the surface smear microbiota are salt-tolerant yeast and bacteria of the phyla Actinobacteria, Firmicutes, and Proteobacteria. In the past, classical culture-based approaches already shed light on the composition and succession of microorganisms and their individual contribution to the typicity of this cheese type. However, during the last decade, the introduction and application of novel molecular approaches with high-resolution power provided further in-depth analysis and, thus, a much more detailed view of the composition, structure, and diversity of the cheese smear microbiota. This led to abundant novel knowledge, such as the identification of so far unknown community members. Hence, this review is summarizing the current knowledge of the diversity of the surface smear microbiota and its contribution to the quality and safety of smear-ripened cheese. If the succession or composition of the surface-smear microbiota is disturbed, cheese smear defects might occur, which may promote food safety issues. Hence, the discussion of cheese smear defects in the context of an increased understanding of the intricate surface smear ecosystem in this review may not only help in troubleshooting and quality control but also paves the way for innovations that can lead to safer, more consistent, and higher-quality smear-ripened cheeses.

Postharvest Quality Improvement of Tomato (Solanum lycopersicum L.) Fruit Using a Nanomultilayer Coating Containing Aloe vera

The effectiveness of an alginate/chitosan nanomultilayer coating without (NM) and with Aloe vera liquid fraction (NM+Av) was evaluated on the postharvest quality of tomato fruit at 20 °C and 85% relative humidity (RH) to simulate direct consumption. Both nanomultilayer coatings had comparable effects on firmness and pH values. However, the NM+Av coating significantly reduced weight loss (4.5 ± 0.2%) and molds and yeasts (3.5-4.0 log CFU g-1) compared to uncoated fruit (16.2 ± 1.2% and 8.0 ± 0.0 log CFU g-1, respectively). It notably lowered O2 consumption by 70% and a 52% decrease in CO2 production, inhibiting ethylene synthesis. Visual evaluation confirmed NM+Av's efficacy in preserving the postharvest quality of tomato. The preservation of color, indicated by the Minolta color (a*/b*) values, demonstrated NM+Av's ability to keep the light red stage compared to uncoated fruit. The favorable effects of NM+Av coating on enhancing postharvest quality indicates it as a potential alternative for large-scale tomato fruit preservation.

Packaging films based on biopolymers from seafood processing wastes: Preparation, properties, and their applications for shelf-life extension of seafoods-A comprehensive review

Biopolymers derived from seafood processing byproducts are used to prepare active and biodegradable films as the packaging of food products. These films possess bioactivities to enhance the shelf life of packed foods by proactively releasing antimicrobial/antioxidative agents into the foods and providing sufficient barrier properties. Seafood processing byproducts are an eminent source of valuable compounds, including biopolymers and bioactive compounds. These biopolymers, including collagen, gelatin, chitosan, and muscle proteins, could be used to prepare robust and sustainable food packaging with some antimicrobial agents or antioxidants, for example, plant extracts rich in polyphenols or essential oils. These active packaging are not only biodegradable but also prevent the deterioration of packed foods caused by spoilage microorganisms as well as chemical deterioration. Seafood discards have a promising benefit for the development of environmentally friendly food packaging systems via the appropriate preparation methods or techniques. Therefore, the green packaging from seafood leftover can be better exploited and replace the synthetic counterpart.

Gelatin-starch composite coating containing cucumber peel extract and cumin essential oil: Shelf life improvement of a cheese model

In this study, the effects of gelatin-starch (GS) composite coating containing cucumber peel extract (CPE) and cumin essential oil (CEO) were evaluated on the shelf life enhancement of ultrafiltered (UF) cheese during 56 days of storage under refrigerated conditions. The obtained hydroethanolic CPE by the microwave method showed the best results in terms of the total phenolic content, reducing power, 2,2'-diphenyl-1-picrylhydrazyl (DPPH) activity, and 2,2-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical scavenging activity compared to the immersion and ultrasound methods. The studied treatments were as follows: Control (C), GS, CPE, CEO, GS-CPE, GS-CEO, and GS-CPE-CEO. Scanning electron microscopic surface morphology of treated cheese samples showed the formation of a firm, integrated, flawless, and homogenous layer on the cheese slices of the GS-CPE-CEO treatment. All treatments significantly (p ≤ .05) decreased the total viable count, psychotropic bacteria, and yeast-mold population compared to the control group. Adding CEO and/or CPE to GS significantly (p ≤ .05) controlled undesirable changes in physical characteristics, such as weight, color, and hardness of the cheese slices. Throughout storage time, the coated cheese slices showed more stable chemical features in comparison to the uncoated cheese samples in terms of moisture, lipid oxidation, pH, and titratable acidity (TA). Sensory evaluation of the preparations showed that the GS coating containing CPE and CEO significantly (p ≤ .05) had pleasant effects on the sensory features (taste, odor, texture, and overall acceptability) of the cheese samples during storage time. It was concluded that composite coating of GS containing CPE and CEO could improve the microbial, physical, chemical, and sensory features of ultrafiltration (UF) cheese during refrigerated storage.

Home-made cheese preservation using sodium alginate based on edible film incorporating essential oils

The objective of the present study is developing a new technique for the preservation of natural cheese by the use of an edible biofilm based on sodium alginate in order to evaluate the effect of the essential oils (O. basilicum L, R. officinalis L. A. herba alba Asso. M. pulegium L.) incorporated in the film on the oxidation stability, microbial spoilage, physicochemical characteristics and sensory criteria. The cheese samples coated with sodium alginate incorporated by the oils showed moderate stability in terms of oxidative stabilities of proteins and lipids during storage. In addition, poor microbial growth (total aerobic mesophilic flora, yeasts and fecal coliforms) was observed in cheese samples coated with biofilm, also, the growth of Staphylococci Salmonella and Molds for all types of cheese were completely inhibited. Additionally, it was observed that the biofilm coating reduced the weight loss and hardness of the cheese comparing with the uncoated sample. The results of sensory analysis revealed that uncoated cheese, coated with sodium alginate and sodium alginate composed of oil of O. basilicum were the most preferred by panelists, in comparison with others. Therefore, it was concluded that this technique of coating cheese with edible film activated with essential oils is preferred and favorable by virtue of the effect of oils preserving the cheese without seriously affecting their organoleptic properties.

Use of chitosan and tannins as alternatives to antibiotics to control mold growth on PDO Pecorino Toscano cheese rind

The fungal microbiota usually growing on the cheese surface during ripening processes promote rind formation and the development of organoleptic characteristics, imparting positive sensory attributes to cheeses. As cheese contamination may also occur by undesirable molds, specific actions for preventing their growth are usually realized in dairy industries by using the antibiotic natamycin, which may represent a risk factor for human health and environmental sustainability. Here, agroindustrial by-products with natural antimicrobial properties, i.e. tannins and chitosan, were tested in a cheese-making trial producing PDO Tuscan pecorino cheese. Morphological and molecular methods revealed that the main components of rind fungal communities of PDO Tuscan pecorino cheese were represented by P. solitum, P. discolour and P. verrucosum. The use of chitosan on cheese rinds did not significantly affect the composition of rind fungal communities developing during the whole ripening process compared with controls treated with natamycin, whose numbers ranged from 3.4 ± 1.3 × 10³ to 3.2 ± 1.8 × 10⁴ and from 6.3 ± 3.5 × 10² to 4.0 ± 1.5 × 10⁴, respectively. Overall, grape marc tannins and chitosan did not significantly affect the number and composition of fungal communities developing during PDO Pecorino Toscano cheese ripening, as well as its physical, chemical and nutritional profiles, showing that they may represent effective alternatives to the antibiotic natamycin.

Antimicrobial, microscopic and spectroscopic properties of cellulose paper coated with chitosan sol-gel solution formulated by epsilon-poly-l-lysine and its application in active food packaging

Cellulose paper-chitosan (CC) double-layer films containing epsilon-poly-l-lysine (ε-PL) (0.5 and 1% w/v) were developed. FTIR analysis showed a strong association between the ε-PL and CC film. Antimicrobial activity against Listeria monocytogenes was investigated both in vitro and in the chicken breast meat. The CC films without ε-PL showed no antimicrobial activity, while the addition of ε-PL induced significant (p < 0.05) effects. During the 28 days of storage at 4 ^°C, no significant difference was found on the anti-listeria activity of films. When storage temperature was raised from 4 to 22 ^°C, the antimicrobial activity was reduced. Films containing 1% ε-PL exhibited 1.5 log₁₀ CFU/g reduction in L. monocytogenes population during 12 days storage of meat at 4 ^°C, while no significant reduction was found in CC films with 0.5% ε-PL (p > 0.05). This study revealed an antimicrobial activity for CC films impregnated with ε-PL, to control foodborne pathogens in meat.

Application of edible coatings on fresh and minimally processed fruits: a review

Purpose

This paper aims to update with information about edible coating on minimally processed and fresh fruits, focussing on the composition, active ingredients, antimicrobial concentration and their effect on ripening rate, phytonutrients retention and shelf-life of fruits. In future, the data will be helpful for the processors to select the best coating material and its effective concentration for different fresh and minimally processed fruits.

Design/methodology/approach

Major scientific information was collected from Scopus, Web of Science, Mendeley and Google Scholar. Several key words such as postharvest, edible coating, phytonutrients, shelf-life enhancement, bioactive compounds, minimally processed fruits and antimicrobial compounds were used to find the data. Relevant information was collected by using 90 recent research and review articles.

Findings

The main findings of this comprehensive review are to improve the quality of fruits, to meet the next-generation food security needs. However, in the process of achieving the goal of improving quality of food produce, embrace of synthetic, non-biodegradable packaging materials have increased, creating serious pollution problem. Amidst several alternatives for replacement of synthetic packaging, the option of biodegradable films and coatings showed promising results.

Originality/value

The paper represents recent information about the edible coating used for the enhancement of shelf-life of fresh and minimally processed fruits.

Characterization of cellulosic paper coated with chitosan-zinc oxide nanocomposite containing nisin and its application in packaging of UF cheese

A new antimicrobial bilayer film was developed using chitosan, cellulose, and nisin. Chitosan solution containing nisin (500 and 1000μg/mL) was prepared by sol-gel method and then the solution was coated on cellulose paper by dip coating method. A chitosan-cellulose film without antimicrobial had no inhibitory effect on Listeria monocytogenes, whereas, the incorporation of nisin made a significant increase (P<0.05) in antimicrobial characteristics of the films. Moreover, no significant differences were shown on antimicrobial activity of developed films during the storage at 4°C for one month. However, the addition of nisin showed a significant increase in the swelling index and solubility of bilayer film. Scanning electron microscope images revealed a uniform coating of chitosan solution on cellulose paper. The FTIR analysis also confırmed successful introducing and binding of the nisin in double layer film. Films with 1000μg/mL of nisin completely inactivated the initial (∼5log₁₀ CFU/g) counts of L. monocytogenes on the surface of Ultra-filter white cheese after storage at 4°C for 14 days. We concluded that nanocomposite film of chitosan-cellulose containing nisin has novel antibacterial activity and can be used for packaging in cheese.

Antimicrobial edible coatings and films from micro-emulsions and their food applications

This study focused on the use of antimicrobial edible coatings and films from micro-emulsions to reduce populations of foodborne pathogens in foods. Corn-Bio-fiber gum (C-BFG) was used as an emulsifier with chitosan. Allyl isothiocyanate (AIT) and lauric arginate ester (LAE) served as antimicrobials. Micro-emulsions were obtained from a solution consisting of 1% chitosan, 0.5% C-BFG, and 1-4% AIT or LAE which was subject to high pressure homogenization (HPH) processing at 138MPa for 3cycles. Coatings and films produced from the micro-emulsions had micro-pores with sizes ranging from 100 to 300nm and micro-channels that hold antimicrobials effectively and facilitate the release of antimicrobials from the center to the surface of the films or coatings, thus enhancing their antimicrobial efficacy. The coatings and films with 1% AIT reduced populations of Listeria innocua by over 5, 2, and 3 log CFU in culture medium (Tryptic soy broth, TSB), ready-to-eat meat, and strawberries, respectively. The coatings and films with 1% LAE reduced populations of Escherichia coli O157:H7 and Salmonella spp. by over 5 and 2 log CFU in TSB and strawberries, respectively. This study provides an innovative approach for the development of effective antimicrobial materials to reduce food borne pathogenic contaminants on ready-to-eat meat, strawberries, or other food.

Effect of the Fish Oil Fortified Chitosan Edible Film on Microbiological, Chemical Composition and Sensory Properties of Göbek Kashar Cheese during Ripening Time

Objective of the present study is to investigate the effect of coated edible films with chitosan solutions enriched with essential oil (EO) on the chemical, microbial and sensory properties of Kashar cheese during ripening time. Generally, no differences were found in total aerobic mesophilic bacteria, streptococci and lactoccocci counts among cheeses but these microorganism counts increased during 60 and 90 d storage especially in C1 (uncoated sample) as compared with coated samples. Antimicrobial effectiveness of the films against moulds was measured on 30, 60, and 90 d of storage. In addition of fish EO into chitosan edible films samples were showed to affect significantly decreased the moulds (p<0.05) as 1.15 Log CFU/g in C4 (with fish oil (1% w/v) fortified chitosan film) on the 90(th) d, while in C1 as 3.89 Log CFU/g on the 90(th) d of ripening. Compared to other cheese samples, C2 (coated with chitosan film) and C4 coated cheese samples revealed higher levels of water-soluble nitrogen and ripening index at the end of storage. C2 coated cheese samples were preferred more by the panellists while C4 coated cheese samples received the lowest scores.

Polysaccharide-Based Membranes in Food Packaging Applications

Plastic packaging is essential nowadays. However, the huge environmental problem caused by landfill disposal of non-biodegradable polymers in the end of life has to be minimized and preferentially eliminated. The solution may rely on the use of biopolymers, in particular polysaccharides. These macromolecules with film-forming properties are able to produce attracting biodegradable materials, possibly applicable in food packaging. Despite all advantages of using polysaccharides obtained from different sources, some drawbacks, mostly related to their low resistance to water, mechanical performance and price, have hindered their wider use and commercialization. Nevertheless, with increasing attention and research on this field, it has been possible to trace some strategies to overcome the problems and recognize solutions. This review summarizes some of the most used polysaccharides in food packaging applications.

Chitosan/whey Protein (CWP) Edible Films Efficiency for Controlling Mould Growth and on Microbiological, Chemical and Sensory Properties During Storage of Göbek Kashar Cheese

The objective of present study was to evaluate the effects of the application of chitosan and chitosan/whey protein on the chemical, microbial and organoleptic properties of Göbek Kashar cheese during ripening time (on 3(rd), 30(th), 60(th) and 90(th) d). Difference in microbiological and chemical changes between samples was found to be significant (p<0.05) during ripening period. Cheese samples with edible coating had statistically lower mould counts compared to the uncoated samples. Furthermore the highest and lowest mould counts were determined in control (4.20 Log CFU/g) and other samples (<1 Log CFU/g) at 60(th) and 90(th) d of storage. All samples exhibited higher levels of water soluble nitrogen and ripening index at the end of storage process. At the end of 90 day storage period, no signicant dierences in salt and fat values were observed among the cheeses studied. The edible coatings had a beneficial effect on the sensory quality of cheese samples. In the result of sensory analysis, while cheese C and the chitosan coated cheese samples were more preferred by the panellists, the chitosan/whey protein film-coated cheese samples received the lowest scores. This study shows coating suggests could be used to improve the quality of cheese during ripening time.

Characterization and rheological study of the galactomannan extracted from seeds of Cassia grandis

Galactomannan extracted from seeds of Cassia grandis with 0.1M NaCl, followed by ethanol precipitation, presented a yield of 36 ± 8%. The polysaccharide has a constant mannose/galactose ratio (2.44:1). Methylation analysis, one and two dimensional NMR spectroscopy confirmed that the polysaccharide has a central core composed of 4-linked β-mannose units, with branches of galactose, linked to the carbohydrate core through α(1-6) linkage. The amorphous nature of the galactomannan was confirmed by X-ray diffraction. Rheological characterization exhibited Newtonian plateaus followed by shear-thinning zones characteristic of polymer solutions up to 1.5% (w/v) and above this value the system exhibited yield stress associated with a weak gel. Adjusting stress-strain curves confirmed a 1.6% (w/v) as the galactomannan concentration value for the sol-gel transition. These results indicate that the galactomannan extracted from C. grandis seeds presents rheological characteristics suitable for applications in pharmaceutical, biomedical, cosmetic and food industries.

Effectiveness of almond gum trees exudate as a novel edible coating for improving postharvest quality of tomato (Solanum lycopersicum L.) fruits

The use of coatings is a technique used to increase postharvest life of the fruit. Almond gum exudate was used, in comparison with gum arabic, at concentrations of 10% as a novel edible coating, to preserve the quality parameters of tomato ( Solanumlycopersicum). Fruits were harvested at the mature-green stage of ripening. Results showed that the coatings delayed significantly ( p < 0.05) the changes in color, weight loss, firmness, titratable acidity, ascorbic acid content, soluble solids concentration, and decay percentage compared to uncoated control fruits. Sensory evaluation proved the efficacy of 10% almond gum and gum arabic coatings to maintain the overall quality of tomato fruits during storage period (20 days). In addition, the difference between gum arabic and almond gum coatings was not significant ( p > 0.05) except for pulp color. Therefore, we can suggest the use of almond gum exudate as a novel edible coating extends the shelf-life of tomato fruits on postharvest.