Palladium-Catalyzed Silylations of Hydrosilanes with Aryl Halides Using Bulky Alkyl Phosphine

Hydrosilane/Organoiodine Coupling-Enabled Studies of Organosilane Physical Properties

ConspectusThis Account summarizes recent developments in metal-mediated coupling reactions between hydrosilanes and aryl iodides in the presence of Pd(P(t-Bu)3)2 and base. Alkylated organosilanes are obtained when Pt(P(t-Bu)3)2 and a base are employed in reactions between hydrosilanes and aliphatic iodides. These transformations show unusual reactivity compared to the typical behavior of hydrosilanes toward organoiodides in the presence of PdCl2 or PtCl2, and they proceed in high yields under mild conditions. In addition, the reaction demonstrates (1) high functional group tolerances, (2) stepwise introduction of substituents onto silicon atoms from secondary silanes, and (3) transformation without cleavage of weak Si-Si σ bonds in the molecules.This transformation can serve as a powerful tool for the synthesis of functional organosilicon compounds. The advantage is the flexibility in the molecular structure due to the large size compared to carbon. These compounds have relatively sparse packing in the crystalline state, unlike π-conjugated molecules, which induce dense π-π interactions. Consequently, they have significantly different physical properties in solution and in the solid state. Among them, aromatic disilanes and oligosilanes are important substance groups, because the conjugated chain within these molecules expands due to σ-π interaction between Si-Si σ bond and π orbital of aromatic ring. σ-π Conjugation is most efficient when the dihedral angle between the aromatic ring and the Si-Si bond is 90°, resulting in the overlap of σ orbital and π orbital. The conformational structure, packing, and physical properties of these compounds can change in tandem in response to external stimuli through a crystal phase transition. The interlocking changes in structure and physical properties are reversible, easily returning to their original state with different external stimulus. This account covers several important aspects, including solid-state emission with high fluorescence intensity, aggregation-induced emission (AIE) in water-THF system, mechanochromic fluorescence, organic light emitting diode (OLED), second harmonic generation (SHG) and thermosalient phenomena.This reaction can synthesize optically active tertiary and quaternary silanes by the enantioselective arylation of secondary silanes with aryl iodides using a palladium catalyst modified with a TADDOL-derived amide phosphoric acid ester as a chiral ligand. These optically active compounds can be used as useful circularly polarized luminescence (CPL) materials due to their strong luminescence intensity (Φ) and luminescence dissymmetry factor (glum) attributed to the chiral silicon atom. The efficient synthesis of sila-pharmaceuticals using this method as a key step is also described.The technique enables the design and synthesis of various silicon-containing bioactive substances and medical chemicals. Through the synthesis of organosilane compounds using this method, it is anticipated that the development of functional organic silanes will accelerate their practical applications in a wide range of fields.

Controllable Si-C Bond Formation from Trihydrosilanes En Route to Synthesis of 1,4-Azasilinanes with Diverse Silyl Functionalities

A B(C6F5)3-catalyzed controllable inter/intra-/intermolecular Si-C bond formation process has been developed from trihydrosilane and dienamide with alkenes, anilines, or aryl iodides. A variety of 1,4-azasilinanes have been generated with diverse exo-cyclic heteroleptic disubstitutions on silicon, thereby expanding the range of silaazacyclic rings available for the discovery of silicon-containing drugs.

Disilane-bridged architectures: an emerging class of molecular materials

Disilanes are organosilicon compounds that contain saturated Si-Si bonds. The structural characteristics of Si-Si single bonds resemble those of C-C single bonds, but their electronic structure is more similar to that of C[double bond, length as m-dash]C double bonds, as Si-Si bonds have a higher HOMO energy level. These organosilicon compounds feature unique intramolecular σ electron delocalization, low ionization potentials, polarizable electronic structure, and σ-π interaction. It has been demonstrated that the employment of disilane units (Si-Si) is a versatile and effective approach for finely adjusting the photophysical properties of organic materials in both solution and solid states. In this review, we present and discuss the structure, properties, and relationships of novel σ-π-conjugated hybrid architectures with saturated Si-Si σ bonds. The application of disilane-bridged σ-conjugated compounds as optoelectronic materials, multifunctional solid-state emitters, CPL, and non-linear optical and stimuli-responsive materials is also reviewed.

Construction of C(sp2)-Si Bonds via Ligand-Promoted C-C Bonds Cleavage of Unstrained Ketones

Herein, we report an efficient palladium-catalyzed silylation of aryl and alkenyl ketones via C-C bond cleavage and C-Si bond formation. This protocol features high efficiency and broad substrate scope. Further applications in the late-stage diversification of biologically important molecules demonstrate the synthetic utility of this method.

Sodium silylsilanolate enables nickel-catalysed silylation of aryl chlorides

Structurally diverse aryl chlorides were silylated with sodium silylsilanolate reagents in the presence of a Ni(cod)2 catalyst complexed with a phosphine ligand; PMe2Ph for electron-rich substrates, and PCy2Ph for electron-deficient ones. The mild reaction conditions allowed the silylation of various aryl chlorides including functionalised drug molecules.

A nickel-catalyzed silylation reaction of alkyl aryl sulfoxides with silylzinc reagents

Ni(PEt3)Cl2-catalyzed silylation of alkyl aryl sulfoxides with silylzinc reagents was carried out. This protocol allows alkyl aryl sulfoxides to convert to arylsilicon compounds under mild reaction conditions, tolerates a range of functional groups and is suitable for a wide scope of substrates.

Nickel/copper-cocatalyzed decarbonylative silylation of acyl fluorides

A transformation of acyl fluorides with silylboron via nickel/copper-cocatalysed carbon–fluorine bond cleavage and a sequential decarbonylation, which provides an efficient protocol to functionalize arylsilanes, has been disclosed.

Dimethylformamide-stabilised palladium nanoclusters catalysed coupling reactions of aryl halides with hydrosilanes/disilanes

N,N-Dimethylformamide-stabilised Pd nanocluster (NC) catalysed cross-coupling reactions of hydrosilane/disilane have been investigated. In this reaction, the coupling reaction proceeds without ligands with low catalyst loading. N,N-Dimethylacetamide is a crucial solvent in these reactions. The solvent effect was considered by various techniques, such as transmission electron microscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The Pd NCs can be recycled five times under both hydrosilane and disilane reaction conditions.

A highly efficient and reusable Pd NCs catalyst system for silylation of aryl halides was developed.

Palladium(0)-catalyzed C(sp3)-Si bond formation via formal carbene insertion into a Si-H bond

Pd(0)-Catalyzed formal carbene insertion into Si-H bonds has been achieved as an efficient method for C(sp3)-Si bond formation. The reaction, which uses readily available N-tosylhydrazones as the diazo precursors, is highly efficient and shows a wide substrate scope. Rh(ii) and Cu(i) salts, which are the widely used catalysts for carbene insertion reactions, have been proved to be ineffective for the current reaction. A Pd(ii) carbene migratory insertion/reductive elimination mechanism is proposed.

Stepwise Introduction of Different Substituents to α-Chloro-ω-hydrooligosilanes: Convenient Synthesis of Unsymmetrically Substituted Oligosilanes

A series of unsymmetrically substituted oligosilanes were synthesized via stepwise introduction of different substituents to α-chloro-ω-hydrooligosilanes. The reactions of α-chloro-ω-hydrooligosilanes with organolithium or Grignard reagents gave hydrooligosilanes having various alkyl, alkenyl, alkynyl and aryl groups. Thus-obtained hydrooligosilanes were converted into alkoxyoligosilanes by ruthenium-catalyzed dehydrogenative alkoxylation with alcohols.

Arylsilylation of aryl halides using the magnetically recyclable bimetallic Pd-Pt-Fe3O4 catalyst

Transition metal-catalyzed silylations have typically involved the use of homogeneous non-recyclable catalytic systems. In this work, the first example of a recyclable catalytic system for the synthesis of arylsilanes has been reported, which utilizes the bimetallic complex, Pd-Pt-Fe3O4 nanoparticles. Various arylsilanes were prepared by the reaction of aryl iodides (or bromides) with hydrosilanes. This methodology showed good functional group tolerance toward ester, ketone, aldehyde, nitro, and cyano groups. The bimetallic Pd-Pt-Fe3O4 catalytic system showed better activity than monometallic Pt-Fe3O4 and Pd-Fe3O4 catalysts. In addition, the bimetallic Pd-Pt-Fe3O4 catalytic system could be easily recovered and reused for over twenty cycles.

DDQ-mediated direct C(sp3)–H phosphorylation of xanthene derivatives

A direct route to alkylphosphonates has been achievedviaDDQ-mediated cross-dehydrogenative coupling between diarylphosphine oxides and xanthene derivatives.

Pd-Catalyzed disilylation: an efficient route to 2,2′-bis(trimethylsilyl)biphenyls via trapping transient dibenzopalladacyclopentadienes with hexamethyldisilane

A palladium-catalyzed disilylation reaction of 2-iodobiphenyls with hexamethyldisilane via trapping transient dibenzopalladacyclopentadienes has been achieved.

Deprotonative Silylation of Aromatic C-H Bonds Mediated by a Combination of Trifluoromethyltrialkylsilane and Fluoride

A method for the deprotonative silylation of aromatic C-H bonds has been developed using trifluoromethyltrimethylsilane (CF₃SiMe₃, Ruppert-Prakash reagent) and a catalytic amount of fluoride. In this reaction, CF₃SiMe₃ is considered to act as a base and a silicon electrophile. This process is highly tolerant to various functional groups on heteroarenes and benzenes. Furthermore, this method can be applied to the synthesis of trimethylsilyl group-containing analogs of TAC-101, which is a bioactive synthetic retinoid with selective affinity for retinoic acid receptor α (RAR-α) binding. We also report further transformations of the silylated products into useful derivatives.

Mechanistic Insights into Palladium-Catalyzed Silylation of Aryl Iodides with Hydrosilanes through a DFT Study

The catalytic cycles of palladium-catalyzed silylation of aryl iodides, which are initiated by oxidative addition of hydrosilane or aryl iodide through three different mechanisms characterized by intermediates R₃ Si-Pd^II -H (Cycle A), Ar-Pd^II -I (Cycle B), and Pd^IV (Cycle C), have been explored in detail by hybrid DFT. Calculations suggest that the chemical selectivity and reactivity of the reaction depend on the ligation state of the catalyst and specific reaction conditions, including feeding order of substrates and the presence of base. For less bulky biligated catalyst, Cycle C is energetically favored over Cycle A, through which the silylation process is slightly favored over the reduction process. Interestingly, for bulky monoligated catalyst, Cycle B is energetically more favored over generally accepted Cycle A, in which the silylation channel is slightly disfavored in comparison to that of the reduction channel. Moreover, the inclusion of base in this channel allows the silylated product become dominant. These findings offer a good explanation for the complex experimental observations. Designing a reaction process that allows the oxidative addition of palladium(0) complex to aryl iodide to occur prior to that with hydrosilane is thus suggested to improve the reactivity and chemoselectivity for the silylated product by encouraging the catalytic cycle to proceed through Cycles B (monoligated Pd⁰ catalyst) or C (biligated Pd⁰ catalyst), instead of Cycle A.

A well-defined NHC-Ir(iii) catalyst for the silylation of aromatic C-H bonds: substrate survey and mechanistic insights

A well-defined NHC-Ir(iii) catalyst provides access to a wide range of aryl- and heteroarylsilanes by intermolecular dehydrogenative C–H bond silylation.

A well-defined NHC–Ir(iii) catalyst, [Ir(H)₂(IPr)(py)₃][BF₄] (IPr = 1,3-bis-(2,6-diisopropylphenyl)imidazol-2-ylidene), that provides access to a wide range of aryl- and heteroaryl-silanes by intermolecular dehydrogenative C–H bond silylation has been prepared and fully characterized. The directed and non-directed functionalisation of C–H bonds has been accomplished successfully using an arene as the limiting reagent and a variety of hydrosilanes in excess, including Et₃SiH, Ph₂MeSiH, PhMe₂SiH, Ph₃SiH and (EtO)₃SiH. Examples that show unexpected selectivity patterns that stem from the presence of aromatic substituents in hydrosilanes are also presented. The selective bisarylation of bis(hydrosilane)s by directed or non-directed silylation of C–H bonds is also reported herein. Theoretical calculations at the DFT level shed light on the intermediate species in the catalytic cycle and the role played by the ligand system on the Ir(iii)/Ir(i) mechanism.

A Pincer Ruthenium Complex for Regioselective C-H Silylation of Heteroarenes

A pincer Ru(II) catalyst for the highly efficient undirected silylation of O- and S-heteroarenes with (TMSO)₂MeSiH and Et₃SiH is described, producing heteroarylsilanes with exclusive C2-regioselectivity, good functional-group tolerance, and high turnover numbers (up to 1960). The synthetic utility of the silylated products is demonstrated by Pd-catalyzed Hiyama-Denmark cross-coupling under mild conditions. One-pot, two-step silylation and coupling procedures have been also developed.

Effects of Substitution on Solid-State Fluorescence in 9-Aryl-9-methyl-9H-9-silafluorenes

Aromatic groups were incorporated into 9H-9-silafluorene units at the 9-position (mono-9H-silafluorenes) and 9,9'-positions (di-9H-9-silafluorenes). The aryl substituents showed weak conjugation to the 9H-9-silafluorene for 9-aryl substituted ones 1-7 and a 9,9'-phenylene substituted one (compound 8) and they exhibited similar absorption and emission spectra. The 9H-9-silafluorene 10 containing a 5,5'-(2,2'-bithiophenyl) group showed a significantly red-shifted absorption and fluorescence maxima in the solid-state. Single-crystal X-ray diffraction studies found J-type aggregated structures formed by intermolecular CH-π interactions (ca. 2.6-2.7 Å). Density functional theory (DFT), time-dependent DFT (TD-DFT), and configuration interaction single (CIS) calculations were conducted to explain the observed optical properties.

Decarbonylative Silylation of Esters by Combined Nickel and Copper Catalysis for the Synthesis of Arylsilanes and Heteroarylsilanes

An efficient nickel/copper-catalyzed decarbonylative silylation reaction of carboxylic acid esters with silylboranes is described. This reaction provides access to structurally diverse silanes with high efficiency and excellent functional-group tolerance starting from readily available esters.

π-Conjugated bis(terpyridine)metal complex molecular wires

Bottom-up approaches have gained significant attention recently for the creation of nano-sized, ordered functional structures and materials. Stepwise coordination techniques, in which ligand molecules and metal sources are reacted alternatively, offer several advantages. Coordination bonds are stable, reversible, and self-assembling, and the resultant metal complex motifs may contain functionalities unique to their own characteristics. This review focuses on metal complex wire systems, specifically the bottom-up fabrication of linear and branched bis(terpyridine)metal complex wires on electrode surfaces. This system possesses distinct and characteristic electronic functionalities, intra-wire redox conduction and excellent long-range electron transport ability. This series of comprehensive studies exploited the customizability of bis(terpyridine)metal complex wires, including examining the influence of building blocks. In addition, simple yet effective electron transfer models were established for redox conduction and long-range electron transport. A fabrication technique for an ultra-long bis(terpyridine)metal complex wire is also described, along with its properties and functionalities.

Palladium-catalyzed Si–C bond-forming silylation of aryl iodides with hydrosilanes: an enhanced enantioselective synthesis of silicon-stereogenic silanes by desymmetrization

An enantioselective Pd-catalyzed silicon–carbon bond-forming silylation reaction of aryl iodides with hydrosilanes for the synthesis of silicon-stereogenic silanes has been developed with good enantioselectivity under mild conditions.

Silylations of Arenes with Hydrosilanes: From Transition-Metal-Catalyzed C¢X Bond Cleavage to Environmentally Benign Transition-Metal-Free C¢H Bond Activation

The construction of carbon-silicon bonds is highlighted as an exciting achievement in the field of organosilicon chemistry and green chemistry. Recent developments in this area will enable the sustainable chemical conversion of silicon resources into synthetically useful compounds. Especially, the catalytic silylation through C¢H bond activation without directing groups and hydrogen acceptors is one of the most challenging topics in organic chemistry and green chemistry. These remarkable findings on catalytic silylation can pave the way to a more environmentally benign utilization of earth-abundant silicon-based resources in synthetic chemistry.

Deprotonative C-H silylation of functionalized arenes and heteroarenes using trifluoromethyltrialkylsilane with fluoride

A highly selective C-H silylation reaction of functionalized arenes and heteroarenes was developed using Ruppert-Prakash reagent (TMSCF3) activated by alkali metal fluoride. TMSCF3 is considered to play dual roles as a precursor of a mild base and also as a silicon electrophile. The silylation is compatible with sensitive functional groups such as halogen and nitro groups.

Si–H activation by means of metal ligand cooperation in a methandiide derived carbene complex

Si–H bond activation of a series of silanes by means of metal ligand cooperation is reported.

Activator-free palladium-catalyzed silylation of aryl chlorides with silylsilatranes

The palladium-catalyzed silylation of aryl chlorides with silylsilatranes proceeds under activator-free conditions; hence, wide functional group compatibility is displayed and boryl and siloxy groups are able to survive. Experimental and computational studies revealed that smooth transmetalation from the silylsilatrane to the arylpalladium chloride is facilitated by strong interaction between the Lewis acidic silicon and the chloride.

Rapid synthesis of 3,3' bis-arylated BINOL derivatives using a C-H borylation in situ Suzuki-Miyaura coupling sequence

The increased interest in BINOL derived catalysts for asymmetric transformations has encouraged us to disclose a rapid and scalable method of preparing 3,3' bis-arylated BINOL derivatives 1 using a one-pot CH borylation/Suzuki-Miyaura coupling sequence. The use of an aldehyde additive was found to be crucial to the success of this in situ tandem approach. This method was applied to the preparation of 10 BINOL derivatives, each completed within 24 h. Notably, this approach requires only a single purification step.