Direct Atom-Efficient Esterification between Carboxylic Acids and Alcohols Catalyzed by Amphoteric, Water-Tolerant TiO(acac)2

Enhancing the sodium storage performance of hard carbon by constructing thin carbon coatings via esterification reactions

Hard carbons derived from pitch are considered a competitive low-cost anode for sodium-ion batteries. However, the preparation of pitch-based hard carbon (PHC) requires the aid of a pre-oxidation strategy, which introduces unnecessary defects and oxygen elements, which leads to low initial Coulombic efficiency (ICE) and poor cycling stability. Herein, we demonstrate a new surface engineering strategy by grafting chemically active glucose molecules on the PHC surface via esterification reactions, which can achieve low-cost nano-scaled carbon coating. Thin glucose coating can be carbonized at a lower temperature, which results in a more closed pore structure and fewer functional groups. The as prepared PHC exhibits a high reversible capacity of 328.5 mAh/g with a high ICE of 92.08 % at 0.02 A/g. It is noteworthy that the PHC can be adapted to a variety of cathode materials for full-cell assembling without pre-sodiation, which maintains the characteristics of high capacity and excellent cycling stability. The performance of resin-based hard carbon coated with a similar method was also improved, demonstrating the universality of the technique.

HFIP promoted carbo-lactonisation as a new route to functionalised lactones

We have been able to induce a series of lactonisation reactions of unsaturated acids using a carbocationic intermediate formed in situ. The transformation generates five and six membered lactone rings AND forms a new exocyclic C-C bond at the same time, thus removing the need for further derivatisation of typical lactonisation products (such as from iodo lactonisation). The reaction is operationally straightforward, does not employ any metals and utilises readily accessible alcohol and unsaturated acid substrates.

Metabolic, toxicological, chemical, and commercial perspectives on esterification of dietary polyphenols: a review

Molecular modifications have been practiced for more than a century and nowadays they are widely applied in food, pharmaceutical, or other industries to manipulate the physicochemical, bioactivity, metabolic/catabolic, and pharmacokinetic properties. Among various structural modifications, the esterification/O-acylation has been well-established in altering lipophilicity and bioactivity of parent bioactive compounds, especially natural polyphenolics, while maintaining their high biocompatibility. Meanwhile, various classic chemical and enzymatic protocols and other recently emerged cell factory technology are being employed as viable esterification strategies. In this contribution, the main motivations of phenolic esterification, including the tendency to replace synthetic alkyl phenolics with safer alternatives in the food industry to improve the bioavailability of phenolics as dietary supplements/pharmaceuticals, are discussed. In addition, the toxicity, metabolism, and commercial application of synthetic and natural phenolics are briefly introduced. Under these contexts, the mechanisms and reaction features of several most prevalent chemical and enzymatic esterification pathways are demonstrated. In addition, insights into the studies of esterification modification of natural phenolic compounds and specific pros/cons of various reaction systems with regard to their practical application are provided.

Titanium Tetrachloride-Assisted Direct Esterification of Carboxylic Acids

Ester compounds, widely found in pharmaceutical and natural products, play a crucial role in organic synthesis, prompting the development of numerous methods for their synthesis. An important chemical approach in synthesizing esters from carboxylic acids involves the activation of the carboxyl function, requiring the conversion of the hydroxyl group into a suitable leaving group. This paper presents the findings of our investigations into an efficient method for producing esters from carboxylic acids and alcohols, using the Lewis acid titanium tetrachloride. Titanium tetrachloride has proven highly effective as a coupling reagent for the one-pot formation of esters from carboxylic acids and alcohols operating under mild and neutral conditions. Notably, the reaction eliminates the need for bases, yielding carboxylic esters in high purity and yields. The method is efficient, even with long-chain carboxylic acids, and operates well with primary alcohols in dichloromethane. Steric hindrance, potentially present in carboxylic acids, has a moderate effect on the reaction. Alcohol substrates that easily form stable carbocations require, instead, the use of non-polar solvents like hexane for the reaction.

Copper(I) Complexes of Amide Functionalized Bisphosphine: Proximity Enhanced Metal-Ligand Cooperativity and Its Catalytic Advantage in C(sp3)-H Bond Activation of Unactivated Cycloalkanes in Dehydrogenative Carboxylation Reactions

The reactions of amide functionalized bisphosphine, o-Ph2PC6H4C-(O)N(H)C6H4PPh2-o (1) (BalaHariPhos), with copper salts is described. Treatment of 1 with CuX in a 1:1 molar ratio yielded chelate complexes of the type [CuX{(o-Ph2PC6H4C(O)N(H)C6H4PPh2-o)}-κ2-P,P] (X = Cl, 2; Br, 3; and I, 4), which on subsequent treatment with KOtBu resulted in a dimeric complex [Cu(o-Ph2PC6H4C(O)(N)C6H4PPh2-o)]2 (5). Interestingly, complexes 2-4 showed weak N-H···Cu interactions. These weak H-bonding interactions are studied in detail both experimentally and computationally. Also, CuI complexes 2-5 were employed in the oxidative dehydrogenative carboxylation (ODC) of unactivated cycloalkanes in the presence of carboxylic acids to form the corresponding allylic esters. Among complexes 2-5, halide-free dimeric CuI complex 5 showed excellent metal-ligand cooperativity in the oxidative dehydrogenative carboxylation (ODC) in the presence of carboxylic acids to form the corresponding allylic esters through C(sp3)-H bond activation of unactivated cycloalkanes. Mechanistic details of the catalytic process were established by isolating the precatalyst [Cu{(o-Ph2PC6H4C(O)(NH)C6H4PPh2-o)-κ2-P,P}(OOCPh)] (6) and fully characterized by mass spectrometry, NMR data, and single-crystal X-ray analysis. Density functional theory-based calculations further provided a quantitative understanding of the energetics of a series of H atom transfer steps occurring in the catalytic cycle.

A novel quinoline-based NNN-pincer Cu(II) complex as a superior catalyst for oxidative esterification of allylic C(sp3)-H bonds

We report for the first time that the quinoline-based NNN-pincer Cu(II) complex acts as an air stable superior catalyst for the oxidative cross-coupling of the allyl sp³ C-H bond with an acid for the synthesis of allyl esters in a homogeneous system at ambient temperature. The synthesized catalyst, 1, has been well characterized by various analytical techniques (HRMS, single crystal X-ray diffraction, CV, EPR, UV-vis spectroscopy) and showed excellent catalytic activity for the oxidative esterification of allylic C(sp³)-H bonds at 40 °C within a very short period of time (1 h) using only 1 mol% of the catalyst. A wide variety of aromatic allylic esters were synthesized in moderate to good yields, which could be extended to aliphatic allyl esters as well.

Bioactive Diterpenes, Norditerpenes, and Sesquiterpenes from a Formosan Soft Coral Cespitularia sp

Chemical investigation of the soft coral Cespitularia sp. led to the discovery of twelve new verticillane-type diterpenes and norditerpenes: cespitulins H-O (1-8), one cyclic diterpenoidal amide cespitulactam L (9), norditerpenes cespitulin P (10), cespitulins Q and R (11 and 12), four new sesquiterpenes: cespilins A-C (13-15) and cespitulolide (16), along with twelve known metabolites. The structures of these metabolites were established by extensive spectroscopic analyses, including 2D NMR experiments. Anti-inflammatory effects of the isolated compounds were studied by evaluating the suppression of pro-inflammatory protein tumor necrosis factor-α (TNF-α) and nitric oxide (NO) overproduction, and the inhibition of the gene expression of inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2), in lipopolysaccharide-induced dendritic cells. A number of these metabolites were found to exhibit promising anti-inflammatory activities.

Recent Progress on Photocatalytic Synthesis of Ester Derivatives and Reaction Mechanisms

Esters and their derivatives are distributed widely in natural products, pharmaceuticals, fine chemicals and other fields. Esters are important building blocks in pharmaceuticals such as clopidogrel, methylphenidate, fenofibrate, travoprost, prasugrel, oseltamivir, eszopiclone and fluticasone. Therefore, esterification reaction becomes more and more popular in the photochemical field. In this review, we highlight three types of reactions to synthesize esters using photochemical strategies. The reaction mechanisms involve mainly single electron transfer, energy transfer or other radical procedures.

Synthesis of Thiol Derivatives of Biological Active Compounds for Nanotechnology Application

An efficient method of thiol group introduction to the structure of common natural products and synthetic active compounds with recognized biological efficacy such genistein (1), 5,11-dimethyl-5H-indolo[2,3-b]quinolin (2), capecitabine (3), diosgenin (4), tigogenin (5), flumethasone (6), fluticasone propionate (7), ursolic acid methyl ester (8), and β-sitosterol (9) was developed. In most cases, the desired compounds were obtained easily via two-step processes involving esterification reaction employing S-trityl protected thioacetic acid and the corresponding hydoxy-derivative, followed by removal of the trityl-protecting group to obtain the final compounds. The results of our preliminary experiments forced us to change the strategy in the case of genistein (1), and the derivatization of diosgenin (4), tigogenin (5), and capecitabine (3) resulted in obtaining different compounds from those designed. Nevertheless, in all above cases we were able to obtain thiol-containing derivatives of selected biological active compounds. Moreover, a modelling study for the two-step thiolation of genistein and some of its derivatives was accomplished using the density functional theory (B3LP). A hypothesis on a possible reason for the unsuccessful deprotection of the thiolated genistein is also presented based on the semiempirical (PM7) calculations. The developed methodology gives access to new sulphur derivatives, which might find a potential therapeutic benefit.

Performance-advantaged ether diesel bioblendstock production by a priori design

Lignocellulosic biomass offers a renewable carbon source which can be anaerobically digested to produce short-chain carboxylic acids. Here, we assess fuel properties of oxygenates accessible from catalytic upgrading of these acids a priori for their potential to serve as diesel bioblendstocks. Ethers derived from C₂ and C₄ carboxylic acids are identified as advantaged fuel candidates with significantly improved ignition quality (>56% cetane number increase) and reduced sooting (>86% yield sooting index reduction) when compared to commercial petrodiesel. The prescreening process informed conversion pathway selection toward a C₁₁ branched ether, 4-butoxyheptane, which showed promise for fuel performance and health- and safety-related attributes. A continuous, solvent-free production process was then developed using metal oxide acidic catalysts to provide improved thermal stability, water tolerance, and yields. Liter-scale production of 4-butoxyheptane enabled fuel property testing to confirm predicted fuel properties, while incorporation into petrodiesel at 20 vol % demonstrated 10% improvement in ignition quality and 20% reduction in intrinsic sooting tendency. Storage stability of the pure bioblendstock and 20 vol % blend was confirmed with a common fuel antioxidant, as was compatibility with elastomeric components within existing engine and fueling infrastructure. Technoeconomic analysis of the conversion process identified major cost drivers to guide further research and development. Life-cycle analysis determined the potential to reduce greenhouse gas emissions by 50 to 271% relative to petrodiesel, depending on treatment of coproducts.

Pd-Colloids-Catalyzed/Ag2 O-Oxidized General and Selective Esterification of Benzylic Alcohols

Palladium colloids obtained from the degradation of Hermann-Beller palladacycle proved to be an efficient catalytic system in combination with silver oxide as a selective oxidant for the oxidative esterification of differently substituted benzyl alcohols in MeOH as solvent. Excellent reactivity exhibited by the catalytic system also allowed the alcoholic coupling partner to be changed from MeOH to a wide range of alcohols having diverse functionalities. The mildness of the developed protocol also made it possible to employ propargyl alcohol as the coupling partner without any observation of any interference of the terminal alkyne. Selective oxidative coupling of a primary alcoholic functional group over secondary in the case of glycols and glycerols was also made possible using the developed catalyst system. To test the relevancy of Pd/Ag combined catalysis mixed Pd/Ag colloids were synthesized, characterized by TEM, XRD and XPS and applied to oxidative-esterification successfully.

Ti functionalized hierarchical-pore UiO-66(Zr/Ti) catalyst for the transesterification of phenyl acetate and dimethyl carbonate

Uniformly distributed tetra-coordinated Ti^IV active sites grafted on hierarchical-pore UiO-66(Zr/Ti) as an efficient catalyst for synthesizing diphenyl carbonate.

Preparation of Polyester PolyMIPEs by Polycondensation of Low-Molecular Weight Polyol and Divinyl Ester Using Microwave Activation

Several stable non-aqueous apolar-in-polar medium internal phase emulsions (MIPEs) containing divinyl adipate and pentaerythritol in the continuous phase are formulated by varying the nature of the hydrocarbon. Polycondensation is then conducted either under conventional heating or microwave irradiation after addition of a commercially available organocatalyst. Solvent elimination and drying lead to the corresponding polyester polyMIPEs. A tremendous morphological difference between materials is observed according to the heating method employed. The particular efficiency of microwave activation in the polycondensation of the continuous phase of a non-aqueous emulsion is discussed.

Recent Progress in the Chemistry of Pyridazinones for Functional Group Transformations

While N-hetereocycles have received significant attention in organic synthesis and other research fields, the chemistry of pyridazine, a six-membered aromatic ring with two adjacent nitrogen atoms, and its derivatives has been relatively little understood. This Synopsis describes recent progress made in the synthesis of pyridazine derivatives-particularly, pyridazin-3(2H)-ones-and their utility as efficient and recyclable functional group carriers for various important organic reactions.

Efficient synthesis of esters through oxone-catalyzed dehydrogenation of carboxylic acids and alcohols

An environmentally friendly oxone (20 mol%) catalyzed esterification of carboxylic acids with alcohols has been developed, providing an attractive alternative to the construction of valuable carbonyl esters.

Reusable ionic liquid-catalyzed oxidative esterification of carboxylic acids with benzylic hydrocarbons via benzylic Csp3–H bond activation under metal-free conditions

A protocol for oxidation of the Csp³–H bond in benzylic hydrocarbons with carboxylic acids using ionic liquid as reusable catalyst has been reported.

In-Water and Neat Batch and Continuous-Flow Direct Esterification and Transesterification by a Porous Polymeric Acid Catalyst

A porous phenolsulphonic acid—formaldehyde resin (PAFR) was developed. The heterogeneous catalyst PAFR was applied to the esterification of carboxylic acids and alcohols, affording the carboxylic acid esters in a yield of up to 95% where water was not removed from the reaction mixture. Surprisingly, the esterification in water as a solvent proceeded to afford the desired esters in high yield. PAFR provided the corresponding esters in higher yield than other homogeneous and heterogeneous catalysts. The transesterification of alcohols and esters was also investigated by using PAFR, giving the corresponding esters. PAFR was applied to the batch-wise and continuous-flow production of biodiesel fuel FAME. The PAFR-packed flow reactor that was developed for the synthesis of carboxylic acids and FAME worked for four days without loss of its catalytic activity.

Investigation of faecal volatile organic metabolites as novel diagnostic biomarkers in inflammatory bowel disease

BACKGROUND

The aetiology of inflammatory bowel disease (IBD) remains poorly understood. Recent evidence suggests an important role of gut microbial dysbiosis in IBD, and this may be associated with changes in faecal volatile organic metabolites (VOMs).

AIM

To describe the changes in the faecal VOMs of patients with IBD and establish their diagnostic potential as non-invasive biomarkers.

METHODS

Faecal samples were obtained from 117 people with Crohn's disease (CD), 100 with ulcerative colitis (UC), and 109 healthy controls. Faecal VOMs were extracted using solid-phase micro-extraction and analysed by gas chromatography mass spectrometry. Data analysis was carried out using partial least squares-discriminate analysis (PLS-DA) to determine class membership based on distinct metabolomic profiles.

RESULTS

The PLS-DA model showed clear separation of active CD from inactive disease and healthy controls (P < 0.001). Heptanal, 1-octen-3-ol, 2-piperidinone and 6-methyl-2-heptanone were up-regulated in the active CD group [variable important in projection (VIP) score 2.8, 2.7, 2.6 and 2.4, respectively], while methanethiol, 3-methyl-phenol, short-chain fatty acids and ester derivatives were found to be less abundant (VIP score of 3.5, 2.6, 1.5 and 1.2, respectively). The PLS-DA model also separated patients with small bowel CD from healthy controls and those with colonic CD from UC (P < 0.001). In contrast, less distinct separation was observed between active UC, inactive UC and healthy controls.

CONCLUSIONS

Analysis of faecal volatile organic metabolites can provide an understanding of gut metabolomic changes in IBD. It has the potential to provide a non-invasive means of diagnosing IBD, and can differentiate between UC and CD.

An efficient method for the preparation of tert-butyl esters from benzyl cyanide and tert-butyl hydroperoxide under the metal free condition

A novel protocol to synthesize tert-butyl esters from benzyl cyanides and tert-butyl hydroperoxide has been successfully achieved. Csp³–H bond oxidation, C–CN bond cleavage and C–O bond formation proceeded smoothly in one pot under the metal-free condition.

Synthesis of esters via sp3 C–H functionalisation

This review describes various methods for the synthesis of eleven classes of esters involving sp³ C–H functionalisation.

Novel Chiral Bifunctional L-Thiazoline-Thiourea Derivatives: Design and Application in Enantioselective Michael Reactions

Several novel chiral bifunctional L-thiazoline-thiourea derivatives were easily synthesized from commercially available L-cysteine in high yield. These catalysts were subsequently applied to the enantioselective Michael addition of acetylacetone to β-nitrostyrenes. The products with S configuration were obtained in 98% enantiomeric excess (ee) when the L-thiazoline-thiourea derivatives were used. A plausible transition state model is proposed to explain the observed enantioselectivities.

Titanium superoxide – a stable recyclable heterogeneous catalyst for oxidative esterification of aldehydes with alkylarenes or alcohols using TBHP as an oxidant

A single step catalytic approach for the synthesis of esters from aldehydes using a recyclable heterogeneous catalyst is described.

Biomass derived β-cyclodextrin-SO3H as a solid acid catalyst for esterification of carboxylic acids with alcohols

A novel b-cyclodextrin-SO₃H carbon based solid acid catalyst was prepared and proved highly efficient in solvent free esterification of carboxylic acids with alcohols. The catalyst was easily recovered and reused without any impact on the yields.

Direct dehydrative esterification of alcohols and carboxylic acids with a macroporous polymeric acid catalyst

A macroporous polymeric acid catalyst was prepared for the direct esterification of carboxylic acids and alcohols that proceeded at 50-80 °C without removal of water to give the corresponding esters with high yield. Flow esterification for the synthesis of biodiesel fuel was also achieved by using a column-packed macroporous acid catalyst under mild conditions without removal of water.