Autoxidation of Ethylbenzene: The Mechanism Elucidated

Nanoscale Ni-NiO-ZnO Heterojunctions for Switchable Dehydrogenation and Hydrogenation through Modulation of Active Sites

Catalysts consisting of metal-metal hydroxide/oxide interfaces are highly in demand for advanced catalytic applications as their multicomponent active sites will enable different reactions to occur in close proximity through synergistic cooperation when a single component fails to promote it. To address this, herein we disclosed a simple, scalable, and affordable method for synthesizing catalysts consisting of nanoscale nickel-nickel oxide-zinc oxide (Ni-NiO-ZnO) heterojunctions by a combination of complexation and pyrolytic reduction. The modulation of active sites of catalysts was achieved by varying the reaction conditions of pyrolysis, controlling the growth, and inhibiting the interlayer interaction and Ostwald ripening through the efficient use of coordinated acetate and amide moieties of Zn-Ni materials (ZN-O), produced by the reaction between hydrazine hydrate and Zn-Ni-acetate complexes. We found that the coordinated organic moieties are crucial for forming heterojunctions and their superior catalytic activity. We analyzed two antagonistic reactions to evaluate the performance of the catalysts and found that while the heterostructure of Ni-NiO-ZnO and their cooperative synergy were crucial for managing the effectiveness and selectivity of the catalyst for dehydrogenation of aryl alkanes/alkenes, they failed to enhance the hydrogenation of nitro arenes. The hydrogenation reaction was influenced by the shape, surface properties, and interaction of the hydroxide and oxide of both zinc and nickel, particularly accessible Ni(0). The catalysts showed functional group tolerance, multiple reusabilities, broad substrate applicability, and good activity for both reactions.

Iodination/Amidation of the N-Alkyl (Iso)quinolinium Salts

The NaIO₄-mediated sequential iodination/amidation reaction of N-alkyl quinolinium iodide salts has been first developed. This cascade process provides an efficient way to rapidly synthesize 3-iodo-N-alkyl quinolinones with high regioselectivity and good functional group tolerance. This protocol was also amenable to the isoquinolinium salts, thus providing a complementary method for preparing the 4-iodo-N-alkyl isoquinolinones.

Full use of factors promoting catalytic performance of chitosan supported manganese porphyrin

In order to make full use of the impact of internal and external factors on the performance of title catalyst for ethyl benzene oxidation, the key internal influencing factors on the catalytic performance were modulated by coordinating and grafting manganese porphyrin to mesoporous and macroporous chitosan, and the important external factors (i.e. oxidation reaction conditions) were optimized using Response Surface Methodology. Under the Response Surface Methodology optimized oxidation reaction conditions (176.56 °C, 0.59 MPa, and 0.25 mg amount of manganese porphyrin), the catalyst could be used at least five times. The ethyl benzene conversion, catalyst turnover numbers, and yields reached up to 51.2%, 4.37 × 106 and 36.4% in average, respectively. Compared with the other optimized oxidation reaction conditions, the corresponding values increased 17%, 26% and 53%. Relative to the manganese porphyrin, the catalytic performance and efficiency of the immobilized catalyst had notably increased.

Molecule-Induced Radical Formation (MIRF) Reactions-A Reappraisal

Radical chain reactions are commonly initiated through the thermal or photochemical activation of purpose-built initiators, through photochemical activation of substrates, or through well-designed redox processes. Where radicals come from in the absence of these initiation strategies is much less obvious and are often assumed to derive from unknown impurities. In this situation, molecule-induced radical formation (MIRF) reactions should be considered as well-defined alternative initiation modes. In the most general definition of MIRF reactions, two closed-shell molecules react to give a radical pair or biradical. The exact nature of this transformation depends on the σ- or π-bonds involved in the MIRF process, and this Minireview specifically focuses on reactions that transform two σ-bonds into two radicals and a closed-shell product molecule.

Photodegradation of metoprolol in the presence of aquatic fulvic acids. Kinetic studies, degradation pathways and role of singlet oxygen, OH radicals and fulvic acids triplet states

Metoprolol is a pharmaceutical used for the treatment of cardiovascular diseases and disorders, whose frequent detection in surface waters raises concern. Indirect photodegradation is an important degradation pathway in waters and dissolved organic matter has a major role as photosensitizer. In this study, metoprolol photodegradation, in the absence and in the presence of fulvic acids extracted from the Vouga River (Portugal) (VRFA), was assessed under simulated sunlight. While metoprolol direct photodegradation was deniable, indirect photolysis occurred under the presence of VRFA. It followed a pseudo-first order kinetics and after 72 h of irradiation there was a decrease of metoprolol concentration of ∼80 %. The OH radical (OH) was verified to be the main reactive species (RS) responsible for the photosensitized degradation of metoprolol, but other RS are also involved, probably triplet excited states of FA (³FA*) and singlet oxygen (¹O₂), as demonstrated by the higher inhibition of the photodegradation in presence of sodium azide than in presence of 2-propanol. Based on a previous identification of photoproducts, tentative degradation mechanisms were here proposed. Photoproducts analysis after 24 h irradiation in the absence and presence of scavengers, shown that different RS are involved in the formation of different products/intermediates.

Trace amounts of Cu(OAc)2 boost the efficiency of cumene oxidation catalyzed by carbon nanotubes washed with HCl

Trace amounts of Cu(OAc)₂ significantly improve the activity and selectivity of cumene oxidation catalyzed by HCl-washed carbon nanotubes.

Noncontact catalysis: Initiation of selective ethylbenzene oxidation by Au cluster-facilitated cyclooctene epoxidation

Traditionally, a catalyst functions by direct interaction with reactants. In a new noncontact catalytic system (NCCS), an intermediate produced by one catalytic reaction serves as an intermediary to enable an independent reaction to proceed. An example is the selective oxidation of ethylbenzene, which could not occur in the presence of either solubilized Au nanoclusters or cyclooctene, but proceeded readily when both were present simultaneously. The Au-initiated selective epoxidation of cyclooctene generated cyclooctenyl peroxy and oxy radicals that served as intermediaries to initiate the ethylbenzene oxidation. This combined system effectively extended the catalytic effect of Au. The reaction mechanism was supported by reaction kinetics and spin trap experiments. NCCS enables parallel reactions to proceed without the constraints of stoichiometric relationships, offering new degrees of freedom in industrial hydrocarbon co-oxidation processes.

Mesoporous carbon with high content of graphitic nitrogen for selective oxidation of ethylbenzene

Graphitic-nitrogen doped mesoporous carbon (accounting 85% in all nitrogen species) was easily synthesized by using acetonitrile as a precursor and SBA-15 as a hard template through a chemical vapour deposition method and exhibited a better catalytic performance than other nitrogen-doped carbon materials for selective oxidation of ethylbenzene.

Radical-Pair Formation in Hydrocarbon (Aut)Oxidation

The reaction profiles for the uni- and bimolecular decomposition of benzyl hydroperoxide have been studied in the context of initiation reactions for the (aut)oxidation of hydrocarbons. The unimolecular dissociation of benzyl hydroperoxide was found to proceed through the formation of a hydrogen-bonded radical-pair minimum located +181 kJ mol^-1 above the hydroperoxide substrate and around 15 kJ mol^-1 below the separated radical products. The reaction of toluene with benzyl hydroperoxide proceeds such that O-O bond homolysis is coupled with a C-H bond abstraction event in a single kinetic step. The enthalpic barrier of this molecule-induced radical formation (MIRF) process is significantly lower than that of the unimolecular O-O bond cleavage. The same type of reaction is also possible in the self-reaction between two benzyl hydroperoxide molecules forming benzyloxyl and hydroxyl radical pairs along with benzaldehyde and water as co-products. In the product complexes formed in these MIRF reactions, both radicals connect to a centrally placed water molecule through hydrogen-bonding interactions.

Wettability Control of Co-SiO2@Ti-Si Core-Shell Catalyst to Enhance the Oxidation Activity with the In Situ Generated Hydroperoxide

With the aim of utilizing O₂ as an oxidant, cascade reaction strategy was usually employed by first transforming O₂ into the in situ generated hydroperoxide and then oxidized the substrate. To combine the two steps more efficiently to get a higher reaction rate, a series of core-shell catalysts with core and shell having different wettabilities were designed. The catalysts were characterized by transmission electron microscopy, UV-vis spectroscopy, Fourier transform infrared, sessile water contact angle, among other methods. These catalysts were applied in the research of the diphenyl sulfide oxidation by the in situ generated hydroperoxide derived from ethylbenzene oxidation. Through control experiments, the hydrophobic modification in the shell and core will influence different steps of the overall cascade reaction. Further insight into the reaction illustrated that the overall reaction rate was not simply an adduct of the promotion effects from the two steps, which was mainly attributed to the inhibition effect for the co-oxidation of ethylbenzene with diphenyl sulfide. Through the guidance of the relationship, a rationally designed core-shell catalyst with appropriate modifying organic groups showed an enhanced performance of the overall cascade reaction. The rational design of the catalysts would provide a reference for other cascade reactions.

Photooxidation of Cyclohexane by Visible and Near-UV Light Catalyzed by Tetraethylammonium Tetrachloroferrate

Tetraethylammonium tetrachloroferrate catalyzes the photooxidation of cyclohexane heterogeneously, exhibiting significant photocatalysis even in the visible portion of the spectrum. The photoproducts, cyclohexanol and cyclohexanone, initially develop at constant rates, implying that the ketone and the alcohol are both primary products. The yield is improved by the inclusion of 1% acetic acid in the cyclohexane. With small amounts of catalyst, the reaction rate increases with the amount of catalyst employed, but then passes through a maximum and decreases, due to increased reflection of the incident light. The reaction rate also passes through a maximum as the percentage of dioxygen above the sample is increased. This behavior is due to quenching by oxygen, which at the same time is a reactant. Under one set of reaction conditions, the photonic efficiency at 365 nm was 0.018 mol/Einstein. Compared to TiO2 as a catalyst, Et4N[FeCl4] generates lower yields at wavelengths below about 380 nm, but higher yields at longer wavelengths. Selectivity for cyclohexanol is considerably greater with Et4N[FeCl4], and oxidation does not proceed past cyclohexanone.

Practicably efficient ethylbenzene oxidation catalyzed by manganese tetrakis(4-sulfonatophenyl)porphyrin grafted to powdered chitosan

Manganese tetrakis(4-sulfonatophenyl)porphyrin chloride was grafted onto powdered chitosan via an acid–base reaction and ligation. The grafted catalyst was characterized by transmission electron microscopy, ultraviolet and visible spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectrometry and thermogravimetry. Ethylbenzene oxidation with O[Formula: see text] by the catalyst in the absence of additives and solvents can achieve moderate yields (approximately 30%) of acetophenone and phenethyl alcohol. The grafted catalyst can be reused four times for oxidation reactions. The results indicate that the catalytic activity of manganese tetrakis(4-sulfonatophenyl)porphyrin chloride is promoted by the ligation and grafting function of the amino groups in the powdered chitosan.

Pd-Catalyzed Aerobic Oxidation Reactions: Strategies To Increase Catalyst Lifetimes

The palladium complex [(neocuproine)Pd(μ-OAc)]₂[OTf]₂ (1, neocuproine = 2,9-dimethyl-1,10-phenanthroline) is an effective catalyst precursor for the selective oxidation of primary and secondary alcohols, vicinal diols, polyols, and carbohydrates. Both air and benzoquinone can be used as terminal oxidants, but aerobic oxidations are accompanied by oxidative degradation of the neocuproine ligand, thus necessitating high Pd loadings. Several strategies to improve aerobic catalyst lifetimes were devised, guided by mechanistic studies of catalyst deactivation. These studies implicate a radical autoxidation mechanism initiated by H atom abstraction from the neocuproine ligand. Ligand modifications designed to retard H atom abstractions as well as the addition of sacrificial H atom donors increase catalyst lifetimes and lead to higher turnover numbers (TON) under aerobic conditions. Additional investigations revealed that the addition of benzylic hydroperoxides or styrene leads to significant increases in TON as well. Mechanistic studies suggest that benzylic hydroperoxides function as H atom donors and that styrene is effective at intercepting Pd hydrides. These strategies enabled the selective aerobic oxidation of polyols on preparative scales using as little as 0.25 mol % of Pd, a major improvement over previous work.

Synthesis of Terephthalic Acid by p-Cymene Oxidation using Oxygen: Toward a More Sustainable Production of Bio-Polyethylene Terephthalate

The synthesis of terephthalic acid from biomass remains an unsolved challenge. In this study, we conducted the selective oxidation of p-cymene (synthesized from biodegradable terpenes, limonene, or eucalyptol) into terephthalic acid over a Mn-Fe mixed-oxide heterogeneous catalyst. The impact of various process parameters (oxidant, temperature, reaction time, catalyst amount, oxygen pressure) on the selectivity to terephthalic acid was evaluated, and some mechanistic aspects were elucidated. An unprecedented synthesis of biobased terephthalic acid (51 % yield) in the presence of O₂ is reported.

A novel copper(ii)–lanthanum(iii) metal organic framework as a selective catalyst for the aerobic oxidation of benzylic hydrocarbons and cycloalkenes

The synthesis and catalytic activity of a novel heteronuclear Cu^II and La^III metal organic framework (MOF) having pyridinedicarboxylic acid (CuLa-MOF) is reported.

Porphyrin-based mixed-valent Ag(i)/Ag(ii) and Cu(i)/Cu(ii) networks as efficient heterogeneous catalysts for the azide-alkyne "click" reaction and promising oxidation of ethylbenzene

By using a new porphyrin-based linker, two unusual mixed-valent Ag(i,ii)- and Cu(i,ii)-organic networks were synthesized. Most strikingly, 1 and 2 exhibit highly efficient catalytic activities for the azide-alkyne "click" reaction and oxidation of ethylbenzene.

Nitrogen-doped dual mesoporous carbon for the selective oxidation of ethylbenzene

A nanocasting method to fabricate nitrogen-doped dual mesoporous carbon is proposed by the carbonization of nitrile functional ionic liquid (FIL) grafted SBA-15 for the first time. These carbon materials have high nitrogen content (12.8%), large specific surface areas (763 m(2) g(-1)) and uniform rod morphologies, which are derived from FILs grafted on the surface of SBA-15. Furthermore, by adjusting the impregnation amount of ionic liquids on SBA-15, pore structures of these carbon materials can be adjusted from single to dual mesopores. The developed dual mesoporous carbon materials exhibit good catalytic performance in the selective oxidation of ethylbenzene, ascribed to the promoting effects of nitrogen-doping, high surface area and dual mesostructure. It may be concluded that the dual mesostructure has an advantage over a single mesostructure to obtain a fast mass transport rate, resulting in higher acetophenone yield.

Initiation Chemistries in Hydrocarbon (Aut)Oxidation

For the (aut)oxidation of toluene to benzyl hydroperoxide, benzyl alcohol, benzaldehyde, and benzoic acid, the thermochemical profiles for various radical-generating reactions have been compared. A key intermediate in all of these reactions is benzyl hydroperoxide, the heat of formation of which has been estimated by using results from CBS-QB3, G4, and G3B3 calculations. Homolytic O-O bond cleavage in this hydroperoxide is strongly endothermic and thus unlikely to contribute significantly to initiation processes. In terms of reaction enthalpies the most favorable initiation process involves bimolecular reaction of benzyl hydroperoxide to yield hydroxy and benzyloxy radicals along with water and benzaldehyde. The reaction enthalpy and free energy of this process is significantly more favorable than those for the unimolecular dissociation of known radical initiators, such as dibenzoylperoxide or dibenzylhyponitrite.

Catalytic oxygen activation versus autoxidation for industrial applications: a physicochemical approach

The activation and use of oxygen for the oxidation and functionalization of organic substrates are among the most important reactions in a chemist's toolbox. Nevertheless, despite the vast literature on catalytic oxidation, the phenomenon of autoxidation, an ever-present background reaction that occurs in virtually every oxidation process, is often neglected. In contrast, autoxidation can affect the selectivity to a desired product, to those dictated by pure free-radical chain pathways, thus affecting the activity of any catalyst used to carry out a reaction. This critical review compares catalytic oxidation routes by transition metals versus autoxidation, particularly focusing on the industrial context, where highly selective and "green" processes are needed. Furthermore, the application of useful tests to discriminate between different oxygen activation routes, especially in the area of hydrocarbon oxidation, with the aim of an enhanced catalyst design, is described and discussed. In fact, one of the major targets of selective oxidation is the use of molecular oxygen as the ultimate oxidant, combined with the development of catalysts capable of performing the catalytic cycle in a real energy and cost effective manner on a large scale. To achieve this goal, insights from metallo-proteins that could find application in some areas of industrial catalysis are presented, as well as considering the physicochemical principles that are fundamental to oxidation and autoxidation processes.

Synthesis of nitrogen-containing ordered mesoporous carbon as a metal-free catalyst for selective oxidation of ethylbenzene

Nitrogen-containing ordered mesoporous carbon (NOMC) was synthesized by using m-aminophenol as a carbon and nitrogen co-precursor via a co-assembly process with F127 in aqueous phase and exhibited a good catalytic performance for selective oxidation of ethylbenzene.