Lithium-Mediated Zincation of Pyrazine, Pyridazine, Pyrimidine, and Quinoxaline

Synthesis of Phosphorus(V)-Substituted Six-Membered N-Heterocycles: Recent Progress and Challenges

Heterocycles functionalized with pentavalent phosphorus are of great importance since they include a great variety of biologically active compounds and pharmaceuticals, advanced materials, and valuable reactive intermediates for organic synthesis. Significant progress in synthesis of P(O)R2-substituted six-membered heterocycles has been made in the past decade. This review covers the synthetic strategies towards aromatic monocyclic six-membered N-heterocycles, such as pyridines, pyridazines, pyrimidines, and pyrazines bearing phosphonates and phosphine oxides, which were reported from 2012 to 2022.

Exploiting Coordination Effects for the Regioselective Zincation of Diazines Using TMPZnX⋅LiX (X=Cl, Br)

A new method for regioselective zincations of challenging N-heterocyclic substrates such as pyrimidines and pyridazine was reported using bimetallic bases TMPZnX⋅LiX (TMP=2,2,6,6-tetramethylpiperidyl; X=Cl, Br). Reactions occurred under mild conditions (25-70 °C, using 1.75 equivalents of base without additives), furnishing 2-zincated pyrimidines and 3-zincated pyridazine, which were then trapped with a variety of electrophiles. Contrasting with other s-block metalating systems, which lack selectivity in their reactions even when operating at low temperatures, these mixed Li/Zn bases enabled unprecedented regioselectivities that cannot be replicated by either LiTMP nor Zn(TMP)2 on their own. Spectroscopic and structural interrogations of organometallic intermediates involved in these reactions have shed light on the complex constitution of reaction mixtures and the origins of their special reactivities.

Pyrimidin-6-yl Trifluoroborate Salts as Versatile Templates for Heterocycle Synthesis

We report a novel and general method to access a highly under-studied privileged scaffold-pyrimidines bearing a trifluoroborate at C4, and highlight the broad utility of these intermediates in a rich array of downstream functionalization reactions. This chemistry is underpinned by the unique features of the trifluoroborate group; its robustness provides an opportunity to carry out chemoselective reactions at other positions on the pyrimidine while providing a pathway for elaboration at the C-B bond when suitably activated.

A Predictive Model Towards Site-Selective Metalations of Functionalized Heterocycles, Arenes, Olefins, and Alkanes using TMPZnCl⋅LiCl

The development of a predictive model towards site-selective deprotometalation reactions using TMPZnCl⋅LiCl is reported (TMP=2,2,6,6-tetramethylpiperidinyl). The pKa values of functionalized N-, S-, and O-heterocycles, arenes, alkenes, or alkanes were calculated and compared to the experimental deprotonation sites. Large overlap (>80 %) between the calculated and empirical deprotonation sites was observed, showing that thermodynamic factors strongly govern the metalation regioselectivity. In the case of olefins, calculated frozen state energies of the deprotonated substrates allowed a more accurate prediction. Additionally, various new N-heterocycles were analyzed and the metalation regioselectivities rationalized using the predictive model.

3d Transition Metals for C-H Activation

C-H activation has surfaced as an increasingly powerful tool for molecular sciences, with notable applications to material sciences, crop protection, drug discovery, and pharmaceutical industries, among others. Despite major advances, the vast majority of these C-H functionalizations required precious 4d or 5d transition metal catalysts. Given the cost-effective and sustainable nature of earth-abundant first row transition metals, the development of less toxic, inexpensive 3d metal catalysts for C-H activation has gained considerable recent momentum as a significantly more environmentally-benign and economically-attractive alternative. Herein, we provide a comprehensive overview on first row transition metal catalysts for C-H activation until summer 2018.

Transforming LiTMP Lithiation of Challenging Diazines through Gallium Alkyl Trans-Metal-Trapping

This study establishes a new trans‐metal‐trapping (TMT) procedure based on a mixture of LiTMP (the base) and tris(trimethylsilylmethyl)gallium [Ga(CH₂SiMe₃)₃, GaR₃] (the trap) that, operating in a tandem manner, is effective for the regioselective deprotonation of sensitive diazines in hydrocarbon solution, as illustrated through reactions of pyrazine, pyridazine, and pyrimidine, as well as through the N‐S heterocycle benzothiazole. The metallo‐activated complexes of all of these compounds were isolated and structurally defined.

Donor-influenced Structure-Activity Correlations in Stoichiometric and Catalytic Reactions of Lithium Monoamido-Monohydrido-Dialkylaluminates

A series of heteroleptic monoamido‐monohydrido‐dialkylaluminate complexes of general formula [iBu₂AlTMPHLi⋅donor] were synthesized and characterised in solution and in the solid state. Applying these complexes in catalytic hydroboration reactions with representative aldehydes and ketones reveals that all are competent, however a definite donor substituent effect is discernible. The bifunctional nature of the complexes is also probed by assessing their performance in metallation of a triazole and phenylacetylene and addition across pyrazine. These results lead to an example of phenylacetylene hydroboration, which likely proceeds via deprotonation, rather than insertion as observed with the aldehydes and ketones. Collectively, the results emphasise that reactivity is strongly influenced by both the mixed‐metal constitution and mixed‐ligand constitution of the new aluminates.

C-H Functionalization of Azines

Azines, which are six-membered aromatic compounds containing one or more nitrogen atoms, serve as ubiquitous structural cores of aromatic species with important applications in biological and materials sciences. Among a variety of synthetic approaches toward azines, C-H functionalization represents the most rapid and atom-economical transformation, and it is advantageous for the late-stage functionalization of azine-containing functional molecules. Since azines have several C-H bonds with different reactivities, the development of new reactions that allow for the functionalization of azines in a regioselective fashion has comprised a central issue. This review describes recent advances in the C-H functionalization of azines categorized as follows: (1) S_NAr reactions, (2) radical reactions, (3) deprotonation/functionalization, and (4) metal-catalyzed reactions.

Assessing the reactivity of sodium alkyl-magnesiates towards quinoxaline: single electron transfer (SET) vs. nucleophilic alkylation processes

Structurally tracking the reaction of a sodium butylmagnesiate supported by a bulky silyl(bisamide) ligand towards quinoxaline, SET reactivity.

Deprotometalation-iodolysis and computed CH acidity of 1,2,3- and 1,2,4-triazoles. Application to the synthesis of resveratrol analogues

1-Aryl- and 2-aryl-1,2,3-triazoles were synthesized by N-arylation of the corresponding azoles using aryl iodides. The deprotometalations of 1-phenyl-1,2,3-triazole and -1,2,4-triazole were performed using a 2,2,6,6-tetramethylpiperidino-based mixed lithium-zinc combination and occurred at the most acidic site, affording by iodolysis the 5-substituted derivatives. Dideprotonation was noted from 1-(2-thienyl)-1,2,4-triazole by increasing the amount of base. From 2-phenyl-1,2,3-triazoles, and in particular from 2-(4-trifluoromethoxy)phenyl-1,2,3-triazole, reactions at the 4 position of the triazolyl, but also ortho to the triazolyl on the phenyl group, were observed. The results were analyzed with the help of the CH acidities of the substrates, determined in THF solution using the DFT B3LYP method. 4-Iodo-2-phenyl-1,2,3-triazole and 4-iodo-2-(2-iodophenyl)-1,2,3-triazole were next involved in Suzuki coupling reactions to furnish the corresponding 4-arylated and 4,2'-diarylated derivatives. When evaluated for biological activities, the latter (which are resveratrol analogues) showed moderate antibacterial activity and promising antiproliferative effect against MDA-MB-231 cell line.

Deproto-metallation of N-arylated pyrroles and indoles using a mixed lithium-zinc base and regioselectivity-computed CH acidity relationship

The synthesis of N-arylated pyrroles and indoles is documented, as well as their functionalization by deprotonative metallation using the base in situ prepared from LiTMP and ZnCl2·TMEDA (1/3 equiv). With N-phenylpyrrole and -indole, the reactions were carried out in hexane containing TMEDA which regioselectively afforded the 2-iodo derivatives after subsequent iodolysis. With pyrroles and indoles bearing N-substituents such as 2-thienyl, 3-pyridyl, 4-methoxyphenyl and 4-bromophenyl, the reactions all took place on the substituent, at the position either adjacent to the heteroatom (S, N) or ortho to the heteroatom-containing substituent (OMe, Br). The CH acidities of the substrates were determined in THF solution using the DFT B3LYP method in order to rationalize the experimental results.

Synthesis and first use of pyridine-2,6-diylbis(pyrazine-2-ylmethanone) in metal cluster chemistry: a {MnIII3Na2} complex with an ideal trigonal bipyramidal geometry

A new {Mn₃Na₂} compound with trigonal bipyramidal topology was obtained from a metal-assisted transformation of the ligand (pz)CO(py)CO(pz).

Synthesis of C,N'-linked bis-heterocycles using a deprotometalation-iodination-N-arylation sequence and evaluation of their antiproliferative activity in melanoma cells

Benzothiophene, benzofuran, benzothiazole and benzoxazole were deprotometalated using the lithium-zinc combination prepared from ZnCl2·TMEDA (TMEDA=N,N,N',N'-tetramethylethylenediamine, 1equiv) and lithium 2,2,6,6-tetramethylpiperidide (LiTMP, 3equiv). Subsequent interception of the 2-metalated derivatives using iodine as electrophile led to the iodides in 81%, 82%, 67% and 42% yields, respectively. These yields are higher (10% more) than those obtained using ZnCl2·TMEDA (0.5equiv) and LiTMP (1.5equiv), except in the case of benzoxazole (10% less). The crude iodides were involved in the N-arylation of pyrrole, indole, carbazole, pyrazole, indazole, imidazole and benzimidazole in the presence of Cu (0.2equiv) and Cs2CO3 (2equiv), and using acetonitrile as solvent (no other ligand) to provide after 24h reflux the expected N-arylated azoles in yields ranging from 33% to 81%. Using benzotriazole also led to N-arylation products, but in lower 34%, 39%, 36% and 6% yields, respectively. A further study with this azole evidenced the impact of 2,2,6,6-tetramethylpiperidine on the N-arylation yields. Most of the C,N'-linked bis-heterocycles thus synthesized (in particular those containing benzimidazole) induced a high growth inhibition of A2058 melanoma cells after a 72h treatment at 10(-5)M.

Reductive couplings of 2-halopyridines without external ligand: phosphine-free nickel-catalyzed synthesis of symmetrical and unsymmetrical 2,2'-bipyridines

An unexpectedly facile synthetic approach for symmetrical and unsymmetrical 2,2'-bipyridines through the Ni-catalyzed reductive couplings of 2-halopyridines was developed. The couplings were efficiently catalyzed by 5 mol % of NiCl2·6H2O without the use of external ligands. A variety of 2,2'-bipyridines including caerulomycin F have been efficiently synthesized.

Deproto-metallation using mixed lithium–zinc and lithium–copper bases and computed CH acidity of 2-substituted quinolines

The metallated quinolines were functionalized by iodolysis or aroylation.

Full functionalization of the 7-azaindole scaffold by selective metalation and sulfoxide/magnesium exchange

Filling positions: 7-Azaindoles are important targets in the pharmaceutical industry. All five carbon positions of the azaindole ring system can be functionalized in a predictable manner starting from the appropriately substituted azaindole 1 by directed metalation and halogen/magnesium and sulfoxide/magnesium exchange. The products are fully substituted azaindoles of type 2.

New lithium-zincate approaches for the selective functionalisation of pyrazine: direct dideprotozincation vs. nucleophilic alkylation

Comparing the reactivity of the related lithium zincates [(THF)LiZn(TMP)(t)Bu(2)] (1) and [(PMDETA)LiZn(t)Bu(3)] (2) towards pyrazine discloses two new bimetallic approaches for the selective 2,5-dideprotonation and room temperature C-H alkylation of this sensitive heterocycle.