Oligonucleotide sequential bis-conjugation via click-oxime and click-Huisgen procedures

Advancing Nitrile-Aminothiol Strategy for Dual and Sequential Bioconjugation

Nitrile-aminothiol conjugation (NATC) stands out as a promising biocompatible ligation technique due to its high chemo-selectivity. Herein we investigated the reactivity and substrate scope of NAT conjugation chemistry, thus developing a novel pH dependent orthogonal NATC as a valuable tool for chemical biology. The study of reaction kinetics elucidated that the combination of heteroaromatic nitrile and aminothiol groups led to the formation of an optimal bioorthogonal pairing, which is pH dependent. This pairing system was effectively utilized for sequential and dual conjugation. Subsequently, these rapid (≈1 h) and high yield (>90 %) conjugation strategies were successfully applied to a broad range of complex biomolecules, including oligonucleotides, chelates, small molecules and peptides. The effectiveness of this conjugation chemistry was demonstrated by synthesizing a fluorescently labelled antimicrobial peptide-oligonucleotide complex as a dual conjugate to imaging in live cells. This first-of-its-kind sequential NATC approach unveils unprecedented opportunities in modern chemical biology, showcasing exceptional adaptability in rapidly creating structurally complex bioconjugates. Furthermore, the results highlight its potential for versatile applications across fundamental and translational biomedical research.

The Sulfo-Click Reaction and Dual Labeling of Nucleosides

This article contains detailed synthetic procedures for the implementation of the sulfo-click reaction to nucleoside derivatives. First, 3'-O-TBDMS-protected nucleosides are converted to their corresponding 4'-thioacid derivatives in three steps. Then, various conjugates are synthetized via a biocompatible and chemoselective coupling procedure using sulfonyl azide partners. Finally, to illustrate the potential of the sulfo-click reaction, a nucleoside bearing two orthogonal azido groups is synthesized and engaged in one-pot dual labeling through a sulfo-click/copper-catalyzed azide-alkyne cycloaddition (CuAAC) cascade. The high efficiency of the sulfo-click reaction as applied to nucleosides opens up new possibilities in the context of bioconjugation. © 2020 Wiley Periodicals LLC. Basic Protocol 1: General protocol for the synthesis of 4'-thioacid-nucleoside derivatives Basic Protocol 2: Implementation of the sulfo-click reaction Basic Protocol 3: Synthesis of 3'-azido-4'-(carboxamido)ethane-sulfonyl azide-3'-deoxythymidine Basic Protocol 4: Detailed synthetic procedure for one-pot double-click conjugations.

Solid Supports for the Synthesis of 3'-Aminooxy Deoxy- or Ribo-oligonucleotides and Their 3'-Conjugation by Oxime Ligation

Mono- and triethylene glycol aminooxy derivatives were reacted with levulinic acid, protected with dimethoxytrityl, and immobilized on solid support. The resulting solid supports were used for elongation of oligonucleotides. Then, a mild ammonia treatment was applied to remove the oligonucleotide protecting groups, followed by a treatment with 50 mM methoxyamine at pH 4.2, releasing the 3'-aminooxy oligonucleotides by an oxime exchange reaction. The resulting 3'-aminooxy deoxy- or ribo-oligonucleotides were conjugated to various ketones and aldehydes with high efficiency by oxime ligation.

Compatibility between the cysteine-cyclopentenedione reaction and the copper(i)-catalyzed azide-alkyne cycloaddition

The cysteine-cyclopentenedione reaction can be combined with the copper(i)-catalyzed azide-alkyne cycloaddition provided that the former is carried out first. If not, the azide and the cyclopentenedione undergo a 1,3-dipolar cycloaddition, which furnishes triazole-containing compounds and products resulting from nitrogen loss. Both of these products were fully characterized. Attempts to obtain either of them as the main compound or to drive the reaction nearly to completion were unsuccessful, which points to the azide-cyclopentenedione reaction as not being useful for bioconjugation.

Artificial bioconjugates with naturally occurring linkages: the use of phosphodiester

Artificial orthogonal bond formations such as the alkyne–azide cycloaddition have enabled selective bioconjugations under mild conditions, yet naturally occurring linkages between native functional groups would be more straightforward to elaborate bioconjugates. Herein, we describe the use of a phosphodiester bond as a versatile option to access various bioconjugates. An opposite activation strategy, involving 5’-phosphitylation of the supported oligonucleotides, has allowed several biomolecules that possess an unactivated alcohol to be directly conjugated. It should be noted that there is no need to pre-install artificial functional groups and undesired and unpredictable perturbations possibly caused by bioconjugation can be minimized.

Efficient Buchwald-Hartwig-Migita Cross-Coupling for DNA Thioglycoconjugation

An efficient method for the thioglycoconjugation of iodinated oligonucleotides by Buchwald-Hartwig-Migita cross-coupling under mild conditions is reported. The method enables divergent synthesis of many different functionalized thioglycosylated ODNs in good yields, without affecting the integrity of the other A, C, and G nucleobases.

Automated Solid-Phase Click Synthesis of Oligonucleotide Conjugates: From Small Molecules to Diverse N-Acetylgalactosamine Clusters

We developed a novel technique for the efficient conjugation of oligonucleotides with various alkyl azides such as fluorescent dyes, biotin, cholesterol, N-acetylgalactosamine (GalNAc), etc. using copper-catalysed alkyne-azide cycloaddition on the solid phase and CuI·P(OEt)₃ as a catalyst. Conjugation is carried out in an oligonucleotide synthesizer in fully automated mode and is coupled to oligonucleotide synthesis and on-column deprotection. We also suggest a set of reagents for the construction of diverse conjugates. The sequential double-click procedure using a pentaerythritol-derived tetraazide followed by the addition of a GalNAc or Tris-GalNAc alkyne gives oligonucleotide-GalNAc dendrimer conjugates in good yields with minimal excess of sophisticated alkyne reagents. The approach is suitable for high-throughput synthesis of oligonucleotide conjugates ranging from fluorescent DNA probes to various multi-GalNAc derivatives of 2'-modified siRNA.

Aminooxylated Carbohydrates: Synthesis and Applications

Among other classes of biomolecules, carbohydrates and glycoconjugates are widely involved in numerous biological functions. In addition to addressing the related synthetic challenges, glycochemists have invested intense efforts in providing access to structures that can be used to study, activate, or inhibit these biological processes. Over the past few decades, aminooxylated carbohydrates have been found to be key building blocks for achieving these goals. This review provides the first in-depth overview covering several aspects related to the syntheses and applications of aminooxylated carbohydrates. After a brief introduction to oxime bonds and their relative stabilities compared to related C═N functions, synthetic aspects of oxime ligation and methodologies for introducing the aminooxy functionality onto both glycofuranosyls and glycopyranosyls are described. The subsequent section focuses on biological applications involving aminooxylated carbohydrates as components for the construcion of diverse architectures. Mimetics of natural structures represent useful tools for better understanding the features that drive carbohydrate-receptor interaction, their biological output and they also represent interesting structures with improved stability and tunable properties. In the next section, multivalent structures such as glycoclusters and glycodendrimers obtained through oxime ligation are described in terms of synthetic design and their biological applications such as immunomodulators. The second-to-last section discusses miscellaneous applications of oxime-based glycoconjugates, such as enantioselective catalysis and glycosylated oligonucleotides, and conclusions and perspectives are provided in the last section.

Palladium-Mediated Labeling of Nucleic Acids

New applications of Pd-catalyzed coupling reactions (Suzuki-Miyaura, Sonogashira, and Stille-Migita coupling) for post-conjugation of nucleic acids have been developed recently. Breakthroughs in this area might now pave the way for the development of sophisticated DNA probes, which might be of great interest in chemical biology, nanotechnology, and bioanalysis, as well as in diagnostic domains.

An aggregation-induced emission enhancement fluorescent benzoxazine-derived macromolecule: catalyst-free synthesis and its preliminary application for the determination of aqueous picric acid

An aggregation-induced emission enhancement macromolecular benzoxazine derivative was synthesized by a catalyst-free Mannich reaction and showed a fluorescence quenching response towards nitro compounds.

Macrocyclic host-dye reporter for sensitive sandwich-type fluorescent aptamer sensor

We describe herein a novel approach for the fluorescent detection of small molecules using a sandwich-type aptamer strategy based on a signaling macrocyclic host-dye system. One split adenosine aptamer fragment was 5'-conjugated to a β-cylodextrin (CD) molecule while the other nucleic acid fragment was labeled at the 3'-end by a dansyl molecule prone to be included into the macrocycle. The presence of the small target analyte governed the assembly of the two fragments, bringing the dye molecule and its specific receptor in close proximity and promoting the inclusion interaction. Upon the inclusion complex formation, the microenvironment of dansyl was modified in such a way that the fluorescent intensity increased. Concomitantly, this supplementary interaction at the aptamer extremities induced stabilizing effects on the ternary complex. We next proposed a bivalent signaling design where the two extremities of one split aptamer fragment were conjugated to the β-CD molecule while those of the other fragment were tagged by the dansyl dye. The dual reporting dye inclusion promoted an improvement of both the signal-to-background change and the assay sensitivity. Owing to the vast diversity of responsive host-macrocycle systems available, this aptasensor strategy has potential to be extended to the multiplexed analysis and to other kinds of transducers (such as electrochemical).

Assessment of the Full Compatibility of Copper(I)-Catalyzed Alkyne-Azide Cycloaddition and Oxime Click Reactions for bis-Labelling of Oligonucleotides

The conjugation of oligonucleotides with reporters is of great interest for improving their intrinsic properties or endowing new ones. In this context, we report herein a new procedure for the bis-labelling of oligonucleotides through oxime ligation (Click-O) and copper(I)-catalyzed alkyne–azide cycloaddition (Click-H). 5′-Azido and 3′-aldehyde precursors were incorporated into oligonucleotides, and subsequent coupling reactions through Click-O and Click-H (or vice versa) were successfully achieved. In particular, we exhaustively investigated the full compatibility of each required step for both tethering strategies. The results demonstrate that click Huisgen and click oxime reactions are fully compatible. However, whilst both approaches can deliver the targeted doubly conjugated oligonucleotide, the route involving click oxime ligation prior to click Huisgen is significantly more successful. Thus the reactions investigated here can be considered to be key elements of the chemical toolbox for the synthesis of highly sophisticated bioconjugates.

Sequential "click" - "photo-click" cross-linker for catalyst-free ligation of azide-tagged substrates

Heterobifunctional linker allows for selective catalyst-free ligation of two different azide-tagged substrates via strained-promoted azide-alkyne cycloaddition (SPAAC). The linker contains an azadibenzocyclooctyne (ADIBO) moiety on one end and a cyclopropenone-masked dibenzocyclooctyne (photo-DIBO) group on the other. The first azide-derivatized substrate reacts only at the ADIBO end of the linker as the photo-DIBO moiety is azide-inert. After the completion of the first SPAAC step, photo-DIBO is activated by brief exposure to 350 nm light from a fluorescent UV lamp. The unmasked DIBO group then reacts with the second azide-tagged substrate. Both click reactions are fast (k = 0.4 and 0.07 M(-1) s(-1), respectively) and produce quantitative yield of ligation in organic solvents or aqueous solutions. The utility of the new cross-linker has been demonstrated by conjugation of azide functionalized bovine serum albumin (azido-BSA) with azido-fluorescein and by the immobilization of the latter protein on azide-derivatized silica beads. The BSA-bead linker was designed to incorporate hydrolytically labile fragment, which permits release of protein under the action of dilute acid. UV activation of the second click reaction permits spatiotemporal control of the ligation process.

“Click” reactions: a versatile toolbox for the synthesis of peptide-conjugates

Peptides that comprise the functional subunits of proteins have been conjugated to versatile materials (biomolecules, polymers, surfaces and nanoparticles) in an effort to modulate cell responses, specific binding affinity and/or self-assembly behavior.

Orthogonality in organic, polymer, and supramolecular chemistry: from Merrifield to click chemistry

The concept of orthogonality has been applied to many areas of chemistry, ranging from wave functions to chromatography. But it was Barany and Merrifield's orthogonal protecting group strategy that paved the way for solid phase peptide syntheses, other important classes of biomaterials such as oligosaccharides and oligonucleotides, and ultimately to a term in widespread usage that is focused on chemical reactivity and binding selectivity. The orthogonal protection strategy has been extended to the development of orthogonal activation, and recently the click reaction, for streamlining organic synthesis. The click reaction and its variants are considered orthogonal as the components react together in high yield and in the presence of many other functional groups. Likewise, supramolecular building blocks can also be orthogonal, thereby enabling programmed self-assembly, a superb strategy to create complex architectures. Overall, orthogonal reactions and supramolecular interactions have dramatically improved the syntheses, the preparation of functional materials, and the self-assembly of nanoscale structures.

Solid-phase supports for oligonucleotide synthesis

This unit attempts to provide a reasonably complete inventory of over 280 solid supports available to oligonucleotide chemists for preparation of natural and 3'-modified oligonucleotides. Emphasis is placed on non-nucleosidic solid supports. The relationship between the structural features of linkers and their behavior in oligonucleotide synthesis and deprotection is discussed wherever the relevant observations are available.

Covalent conjugation of oligonucleotides with cell-targeting ligands

A continuing problem in the area of oligonucleotide-based therapeutics is the poor access of these molecules to their sites of action in the nucleus or cytosol. A number of approaches to this problem have emerged. One of the most interesting is the use of ligand-oligonucleotide conjugates to promote receptor mediated cell uptake and delivery. Here we provide an overview of recent developments regarding targeted conjugates, including use of peptides, carbohydrates and small molecules as ligands. Additionally we discuss our own experience with this approach and point out both advantages and limitations.

Protected maleimide building blocks for the decoration of peptides, peptoids, and peptide nucleic acids

Monomers allowing for the introduction of [2,5-dimethylfuran]-protected maleimides into polyamides such as peptides, peptide nucleic acids, and peptoids were prepared, as well as the corresponding oligomers. Suitable maleimide deprotection conditions were established in each case. The stability of the adducts generated by Michael-type maleimide-thiol reaction and Diels-Alder cycloaddition to maleimide deprotection conditions was exploited to prepare a variety of conjugates from peptide and PNA scaffolds incorporating one free and one protected maleimide. The target molecules were synthesized by using two subsequent maleimide-involving click reactions separated by a maleimide deprotection step. Carrying out maleimide deprotection and conjugation simultaneously gave better results than performing the two reactions subsequently.

Glycoclusters on oligonucleotide and PNA scaffolds: synthesis and applications

Conjugation of oligonucleotides (ONs) to a variety of reporter groups has been the subject of intensive research during the last decade. Conjugation is indeed of great interest because it can be used not only to improve the existing ONs properties but also to impart new ones. In this context tremendous efforts have been made to conjugate carbohydrate moieties to ONs. Indeed carbohydrates play an important role in biological processes such as signal transduction and cell adhesion through the recognition with sugar-binding proteins (i.e. lectins) located on the surface of cells. For this reason, carbohydrate-oligonucleotide conjugates (COCs) have been first developed for improving the poor cellular uptake or tissue specific delivery of ONs through receptor-mediated endocytosis. Besides the targeted ONs delivery, carbohydrate-oligonucleotide conjugates (COCs) are also evaluated in the context of carbohydrate biochips in which surface coating with carbohydrates is achieved by using the DNA-directed immobilization strategy (DDI). Peptide nucleic acids (PNAs) have also been extensively investigated as a surrogate of DNA for diverse applications. Therefore attachment of carbohydrate moieties to this class of molecules has been studied. The aforementioned applications of COCs require mimicking of the natural processes, in which the weak individual protein-carbohydrate binding is overcome by using multivalent interactions. This tutorial review focuses on the recent advances in carbohydrate-oligonucleotide conjugates and describes the major synthetic approaches available. In addition, an overview of applications that have been developed using various scaffolds allowing multivalent interactions is provided. Finally recent results on the use of peptide nucleic acids as oligonucleotides surrogate are described.

The chemistry and biology of oligonucleotide conjugates

Short DNA or RNA oligonucleotides have tremendous potential as therapeutic agents. Because of their ability to engage in Watson-Crick base pairing, they can interact with mRNA or pre-mRNA targets with high selectivity. As a result, they could precisely manipulate gene expression. This possibility has engendered extensive efforts to develop oligonucleotides as drugs, and many candidates are already in clinical trials. However, a major impediment to the maturation of this field of oligonucleotide-based therapeutics remains: these relatively large and often highly charged molecules don't easily cross cellular membranes, making it difficult for them to reach their sites of action in the cytosol or nucleus. In this Account, we summarize some basic features of the biology of antisense and siRNA oligonucleotides. We then discuss chemical conjugation as an approach to improving the intracellular delivery and therapeutic potential of these agents. Instead of focusing on the details of conjugation chemistry, we emphasize the pharmacological ramifications of oligonucleotide conjugates. In one important approach to improving delivery and efficacy, researchers have conjugated oligonucleotides with ligands designed to bind to particular receptors and thus provide specific interactions with cells. In another strategy, researchers have coupled antisense or siRNA with agents such as cell penetrating peptides that are designed to provoke escape of the conjugate from intracellular vesicular compartments. Although both of these strategies have had some success, further research is needed before oligonucleotide conjugates can find an important place in human therapeutics.

[Monomers containing 2'-o-alkoxymethyl groups as synthons for the synthesis of oligoribonucleotides by the phosphotriester method]

A general scheme for the synthesis of ribonucleotide monomers containing alkoxymethyl group in 2'-O-position for the solid-phase phosphotriester oligonucleotide synthesis using O-nucleophilic intramolecular catalysis has been developed. In particular, the monomers containing 2'-O-modifying 2-azidoethoxymethyl, propargyloxymethyl, or 3,4-cyclocarbonatebutoxymethyl groups has been prepared.

DNA or RNA oligonucleotide 2'-hydrazides for chemoselective click-type ligation with carbonyl compounds

An efficient method for the synthesis of DNA or RNA oligonucleotide 2'-hydrazides is described. Fully deprotected oligonucleotides containing a hydrazide group at the 2'-position of a uridine residue were obtained by a novel two-step procedure: periodate cleavage of an oligonucleotide with 1,2-diol group followed by conversion of the aldehyde to hydrazide with an extended linker arm using a homobifunctional reagent succinic dihydrazide and NaBH(3)CN. The resulting oligonucleotide 2'-hydrazides were efficiently conjugated by a click-type reaction at acidic pH to aliphatic or aromatic aldehydes with or without NaBH(3)CN reduction to afford novel 2'-conjugates.

5'-Bis-conjugation of oligonucleotides by amidative oxidation and click chemistry

A pent-4-ynyl tert-butyl N,N-diisopropyl phosphoramidite was coupled at the 5'-end of oligonucleotides to give a phosphite triester linkage, which forms an H-phosphonate diester linkage during treatment with dichloroacetic acid. Then an amidative oxidation with CCl(4) in the presence of an amine and a 1,3-dipolar cycloaddition with an azide under copper(I) catalysis afforded the bis-conjugated oligonucleotides with high efficiency. The introduction of a bromoalkyl group as a precursor of azidoalkyl by amidative oxidation allowed the performance of two selective 1,3-dipolar cycloadditions.

Application of click-click chemistry to the synthesis of new multivalent RGD conjugates

New multivalent RGD-containing macromolecules were designed by exploiting two orthogonal chemoselective ligations. They were next applied to a competitive cell adhesion assay and used for the non invasive optical imaging of tumour in small animals.