Fluorine end-capped optical fibers for photosensitizer release and singlet oxygen production

Carbon Dots in Photodynamic Therapy: The Role of Dopant and Solvent on Optical and Photo-Responsive Properties

Carbon dots (CDs) are novel carbon-based luminescent materials with wide-ranging applications in biosensing, bioimaging, drug transportation, optical devices, and beyond. Their advantageous attributes, including biocompatibility, biodegradability, antioxidant activity, photostability, small particle size (<10 nm), and strong light absorption and excitation across a broad range of wavelengths, making them promising candidates in the field of photodynamic therapy (PDT) as photosensitizers (PSs). Further enhancements in functionality are imperative to enhance the effectiveness of CDs in PDT applications, notwithstanding their inherent benefits. Recently, doping agents and solvents have been demonstrated to improve CDs' optical properties, solubility, cytotoxicity, and organelle targeting efficiency. These improvements result from modifications to the CDs' carbon skeleton matrices, functional groups on the surface state, and chemical structures. This review discusses the modification of CDs with heteroatom dopants, dye dopants, and solvents to improve their physicochemical and optical properties for PDT applications. The correlations between the surface chemistry, functional groups, the structure of the CDs, and their optical characteristics toward quantum yield, redshift feature, and reactive oxygen species (ROS) generation, have also been discussed. Finally, the progressive trends for the use of CDs in PDT applications are also addressed in this review.

Singlet oxygen generation on a superhydrophobic surface: Effect of photosensitizer coating and incident wavelength on 1O2 yields

Photochemical generation of singlet oxygen (1O2) often relies on homogenous systems; however, a dissolved photosensitizer (PS) may be unsuitable for some applications because it is difficult to recover, expensive to replenish, and hazardous to the environment. Isolation of the PS onto a solid support can overcome these limitations, but implementation faces other challenges, including agglomeration of the solid PS, physical quenching of 1O2 by the support, photooxidation of the PS, and hypoxic environments. Here, we explore a superhydrophobic polydimethylsiloxane (SH-PDMS) support coated with the photosensitizer 5,10,15,20-tetrakis(pentafluorophenyl)-21H,23H-porphyrin (TFPP). This approach seeks to address the challenges of a heterogeneous system by using a support that exhibits low 1O2 physical quenching rates, a fluorinated PS that is chemically resistant to photooxidation, and a superhydrophobic surface that entraps a layer of air, thus preventing hypoxia. Absorbance and fluorescence spectroscopy reveal the monomeric arrangement of TFPP on SH-PDMS surfaces, a surprising but favorable characteristic for a solid-phase PS on 1O2 yields. We also investigated the effect of incident wavelength on 1O2 yields for TFPP in aqueous solution and immobilized on SH-PDMS and found overall yields to be dependent on the absorption coefficient, while the yield per absorbed photon exhibited wavelength independence, in accordance with Kasha-Vavilov's rule.

PDT-Induced Activation Enhanced by Hormone Response to Treatment

Photodynamic therapy (PDT) is a medical treatment with the use of a photosensitizing agent (PS), which, when activated by light, results in selective tissue damage with a cytotoxic effect on tumor cells. PDT leads to the induction of an acute-phase response, which results in the involvement of adrenal glucocorticoid (GC) hormones. PDT, by activating the hormonal response, affects the treatment of cancer. GC release is observed due to adrenal activity, which is driven by changes in the hypothalamic pituitary-adrenal axis triggered by stress signals emanating from the PDT treated tumor. The hormones released in this process in the context of the PDT-induced acute-phase response perform many important functions during anticancer therapy. They lead, among other things, to the systemic mobilization of neutrophils and the production of acute-phase reagents, and also control the production of immunoregulatory proteins and proteins that modulate inflammation. GCs can radically affect the activity of various inflammatory and immune cells, including the apoptosis of cancer cells. A better understanding of the modulation of GC activity could improve the outcomes of cancer patients treated with PDT.

Tuning the 1O2 Oxidation of a Phenol at the Air/Solid Interface of a Nanoparticle: Hydrophobic Surface Increases Oxophilicity

Although silica surfaces have been used in organic oxidations for the production of peroxides, studies of airborne singlet oxygen at interfaces are limited and have not found widespread advantages. Here, with prenyl phenol-coated silica and delivery of singlet oxygen (¹O₂) through the gas phase, we uncover significant selectivity for dihydrofuran formation over allylic hydroperoxide formation. The hydrophobic particle causes prenyl phenol to produce an iso-hydroperoxide intermediate with an internally protonated oxygen atom, which leads to dihydrofuran formation as well as O atom transfer. In contrast, hydrophilic particles cause prenyl phenol to produce allylic hydroperoxide, due to phenol OH hydrogen bonding with SiOH surface groups. Mechanistic insight is provided by air/nanoparticle interfaces coated with the prenyl phenol, in which product yield was 6-fold greater on the hydrophobic nanoparticles compared to the hydrophilic nanoparticles and total rate constants (ASI-k_T) of ¹O₂ were 13-fold greater on the hydrophobic vs hydrophilic nanoparticles. A slope intersection method was also developed that uses the airborne ¹O₂ lifetime (τ_airborne) and surface-associated ¹O₂ lifetime (τ_surf) to quantitate ¹O₂ transitioning from volatile to non-volatile and surface boundary (surface···¹O₂). Further mechanistic insights on the selectivity of the reaction of prenyl phenol with ¹O₂ was provided by density functional theory calculations.

Visible-to-NIR-Light Activated Release: From Small Molecules to Nanomaterials

Photoactivatable (alternatively, photoremovable, photoreleasable, or photocleavable) protecting groups (PPGs), also known as caged or photocaged compounds, are used to enable non-invasive spatiotemporal photochemical control over the release of species of interest. Recent years have seen the development of PPGs activatable by biologically and chemically benign visible and near-infrared (NIR) light. These long-wavelength-absorbing moieties expand the applicability of this powerful method and its accessibility to non-specialist users. This review comprehensively covers organic and transition metal-containing photoactivatable compounds (complexes) that absorb in the visible- and NIR-range to release various leaving groups and gasotransmitters (carbon monoxide, nitric oxide, and hydrogen sulfide). The text also covers visible- and NIR-light-induced photosensitized release using molecular sensitizers, quantum dots, and upconversion and second-harmonic nanoparticles, as well as release via photodynamic (photooxygenation by singlet oxygen) and photothermal effects. Release from photoactivatable polymers, micelles, vesicles, and photoswitches, along with the related emerging field of photopharmacology, is discussed at the end of the review.

Alternative methods of photodynamic therapy and oxygen consumption measurements-A review

Photooxidation generates reactive oxygen species (ROS) through the interaction of dyes or surfaces with light radiation of appropriate wavelength. The reaction is of wide utility and is highly effective in photodynamic therapy (PDT) of various types of cancer and skin disease. Understanding generation of singlet oxygen has contributed to the development of PDT and its subsequent use in vivo. However, this therapy has some limitations that prevent its use in the treatment of cancers located deep within the body. The limited depth of light penetration through biological tissue limits initiation of PDT action in deep tissue. Measurement of oxygen photo consumption is critical due to tumor hypoxia, and use of magnetic resonance imaging (MRI) is particularly attractive since it is non-invasive. This article presents bioluminescence (BL) and chemiluminescence (CL) phenomena based on publications from the last 20 years, and preliminary results from our lab in the use of MRI to measure oxygen concentration in water. Current work is aimed at improving the effectiveness of singlet oxygen delivery to deep tissue cancer.

The good, the bad, and the ugly - controlling singlet oxygen through design of photosensitizers and delivery systems for photodynamic therapy

Singlet oxygen, although integral to photodynamic therapy, is notoriously uncontrollable, suffers from poor selectivity and has fast decomposition rates in biological media. Across the scientific community, there is a conscious effort to refine singlet oxygen interactions and initiate selective and controlled release to produce a consistent and reproducible therapeutic effect in target tissue. This perspective aims to provide an insight into the contemporary design principles behind photosensitizers and drug delivery systems that depend on a singlet oxygen response or controlled release. The discussion will be accompanied by in vitro and in vivo examples, in an attempt to highlight advancements in the field and future prospects for the more widespread application of photodynamic therapy.

S,S-Chiral Linker Induced U Shape with a Syn-facial Sensitizer and Photocleavable Ethene Group

There is a major need for light-activated materials for the release of sensitizers and drugs. Considering the success of chiral columns for the separation of enantiomer drugs, we synthesized an S,S-chiral linker system covalently attached to silica with a sensitizer ethene near the silica surface. First, the silica surface was modified to be aromatic rich, by replacing 70% of the surface groups with (3-phenoxypropyl)silane. We then synthesized a 3-component conjugate [chlorin sensitizer, S,S-chiral cyclohexane and ethene building blocks] in 5 steps with a 13% yield, and covalently bound the conjugate to the (3-phenoxypropyl)silane-coated silica surface. We hypothesized that the chiral linker would increase exposure of the ethene site for enhanced ¹ O₂ -based sensitizer release. However, the chiral linker caused the sensitizer conjugate to adopt a U shape due to favored 1,2-diaxial substituent orientation; resulting in a reduced efficiency of surface loading. Further accentuating the U shape was π-π stacking between the (3-phenoxypropyl)silane and sensitizer. Semiempirical calculations and singlet oxygen luminescence data provided deeper insight into the sensitizer's orientation and release. This study has lead to insight on modifications of surfaces for drug photorelease and can help lead to the development of miniaturized photodynamic devices.

Expanding π-Conjugation in Chlorins Using Ethenyl Linker

A series of chlorin monomers and dyads has been prepared to probe the effect of ethenyl vs ethynyl linkers on the electronic conjugation and optical properties in resulting derivatives. Styryl-substituted chlorins have been prepared either by a Heck reaction or by microwave-assisted olefin metathesis, while β-β ethenyl-linked dyads have been synthesized from the corresponding vinyl-substituted chlorin monomer using microwave-assisted olefin metathesis. It has been found that when an ethenyl linker is connected at the β-position of chlorin it provides stronger electronic conjugation than an ethynyl one, which is manifested by a greater bathochromic shift of the longest wavelength absorption (Q _y) and emission bands. Stronger electronic coupling is particularly evident for dyads, where ethenyl-linked dyad exhibits a strong near-IR absorption band emission (λ_abs = 707 nm, λ_em = 712 nm, Φ_f = 0.45), compared to the deep-red absorption and emission of a corresponding ethynyl-linked dyad (λ_abs = 689 nm, λ_em = 691 nm, Φ_f = 0.48). The reactivity of ethenyl-linked dyads with singlet oxygen is discussed as well. The results reported here provide further guidelines for molecular design of deep-red and near-IR absorbing and intensely emitting chlorin derivatives and chlorins with extended π-electronic conjugation for a variety of photonic applications.

Superhydrophobic Photosensitizers: Airborne 1O2 Killing of an in Vitro Oral Biofilm at the Plastron Interface

Singlet oxygen is a potent agent for the selective killing of a wide range of harmful cells; however, current delivery methods pose significant obstacles to its widespread use as a treatment agent. Limitations include the need for photosensitizer proximity to tissue because of the short (3.5 μs) lifetime of singlet oxygen in contact with water; the strong optical absorption of the photosensitizer, which limits the penetration depth; and hypoxic environments that restrict the concentration of available oxygen. In this article, we describe a novel superhydrophobic singlet oxygen delivery device for the selective inactivation of bacterial biofilms. The device addresses the current limitations by: immobilizing photosensitizer molecules onto inert silica particles; embedding the photosensitizer-containing particles into the plastron (i.e. the fluid-free space within a superhydrophobic surface between the solid substrate and fluid layer); distributing the particles along an optically transparent substrate such that they can be uniformly illuminated; enabling the penetration of oxygen via the contiguous vapor space defined by the plastron; and stabilizing the superhydrophobic state while avoiding the direct contact of the sensitizer to biomaterials. In this way, singlet oxygen generated on the sensitizer-containing particles can diffuse across the plastron and kill bacteria even deep within the hypoxic periodontal pockets. For the first time, we demonstrate complete biofilm inactivation (>5 log killing) of Porphyromonas gingivalis, a bacterium implicated in periodontal disease using the superhydrophobic singlet oxygen delivery device. The biofilms were cultured on hydroxyapatite disks and exposed to active and control surfaces to assess the killing efficiency as monitored by colony counting and confocal microscopy. Two sensitizer particle types, a silicon phthalocyanine sol-gel and a chlorin e6 derivative covalently bound to fluorinated silica, were evaluated; the biofilm killing efficiency was found to correlate with the amount of singlet oxygen detected in separate trapping studies. Finally, we discuss the applications of such devices in the treatment of periodontitis.

Photochemical behavior of biosupramolecular assemblies of photosensitizers, cucurbit[n]urils and albumins

Biosupramolecular assemblies combining cucurbit[n]urils (CB[n]s) and proteins for the targeted delivery of drugs have the potential to improve the photoactivity of photosensitizers used in the photodynamic therapy of cancer. Understanding the complexity of these systems and how it affects the properties of photosensitizers is the focus of this work. We used acridine orange (AO⁺) as a model photosensitizer and compared it with methylene blue (MB⁺) and a cationic porphyrin (TMPyP⁴⁺). Encapsulation of the photosensitizers into CB[n]s (n = 7, 8) modified their photoactivity. In particular, for AO⁺, the photo-oxidation of HSA was enhanced in the presence of CB[7]; meanwhile it was decreased when included into CB[8]. Accordingly, peroxide generation and protein fragmentation were also increased when AO⁺ was encapsulated into CB[7]. The triplet excited state lifetimes of all the photosensitizers were lengthened by their encapsulation into CB[n]s, while the singlet oxygen quantum yield was enhanced only for AO⁺ and TMPyP⁴⁺, but it decreased for MB⁺. The results obtained in this work prompt the necessity of further investigating these kinds of hybrid assemblies as drug delivery systems because of their possible applications in biomedicine.

Heterogenization of Ketone Catalyst for Epoxidation by Low Pressure Plasma Fluorination of Silica Gel Supports

Low pressure plasma was used for preparing heterogeneous organocatalysts 2-(A)-(C) suitable for dioxirane-mediated epoxidations. Heterogenization was accomplished by adsorption of the methyl perfluoroheptyl ketone (2) on fluorinated supports (A)-(C) deriving from the treatment of commercial C₈-silica gel in low pressure plasma fed with fluorocarbons. Catalyst 2-(C) proved to be the most efficient one, promoting epoxidation of an array of alkenes, including unsaturated fatty esters like methyl oleate (10) and the triglyceride soybean oil (11), with the cheap potassium peroxymonosulfate KHSO₅ (caroate) as a green oxidant. Notably, the perfluorinated matrix gives rise to the activation of caroate, generating singlet oxygen. Materials were characterized by infrared Attenuated Total Reflectance spectroscopy (ATR-FTIR), X-ray Photoelectron Spectroscopy (XPS ) and Emission Scanning Electron Microscope (FESEM).

Synthesis of a poly(ethylene glycol) galloyl sensitizer tip for an 'all-in-one' photodynamic device

This paper describes the synthesis of a specialized silica tip for an optical fiber device capable of delivering all components necessary for photodynamic therapy. Oxygen, light and a cleavable tripolyethylene glycol (PEG)-galloyl pheophorbide sensitizer are simultaneously delivered by the silica tip, where the tip was synthesized in six steps. A comparison of synthetic steps to reach PEGylated sensitizers bound to fluorinated silica and a previously reported Teflon/polyvinyl alcohol (PVA) nanocomposite ( Ghosh, G. et al. J. Phys. Chem. B 2015, 119, 4155- 4164) was made. The hydrolytic stability of the attached PEGs and the extent to which the PEG groups enhance solubility will also be discussed. The new triPEG-galloyl sensitizer has the potential for use in intraoperative pointsource photodynamic therapy which aims for precision treatment of residual disease. Schematic of the synthesis of a photoactive silica surface. It is composed of fluorinated silica connected to a photo-releasable sensitizer with short-chain PEGs.

Fluorinated Photodynamic Therapy Device Tips and their Resistance to Fouling for In Vivo Sensitizer Release

We describe progress on a one-step photodynamic therapy (PDT) technique that is simple: device tip delivery of sensitizer, oxygen and light simultaneously. Control is essential for their delivery to target sites to generate singlet oxygen. One potential problem is the silica device tip may suffer from biomaterial fouling and the pace of sensitizer photorelease is slowed. Here, we have used biomaterial (e.g. proteins, cells, etc.) from SQ20B head and neck tumors and whole blood for an assessment of fouling of the silica tips by adsorption. It was shown that by exchanging the native silica tip for a fluorinated tip, a better nonstick property led to an increased sensitizer output by ~10%. The fluorinated tip gave a sigmoidal photorelease where singlet oxygen is stabilized to physical quenching, whereas the native silica tip with unprotected SiO-H groups gave a slower (pseudolinear) photorelease. A further benefit from fluorinated silica is that 15% less biomaterial adheres to its surface compared to native silica based on a bicinchoninic acid assay (BCA) and X-ray photoelectron spectroscopy (XPS) measurements. We discuss how the fluorination of the device tip increases biofouling resistance and can contribute to a new pointsource PDT tool.

Intramolecular Transfer of Singlet Oxygen

The intramolecular transfer of energy (FRET) and electrons (Dexter) are of great interest for the scientific community and are well-understood. In contrast, the intramolecular transfer of singlet oxygen ((1)O2), a reactive and short-lived oxygen species, has until now been unknown. This process would be very interesting because (1)O2 plays an important role in photodynamic therapy (PDT). Herein, we present the first successful intramolecular transfer of (1)O2 from a donor to acceptor. Also, we found a dependence of conformation and temperature comparable with those of FRET. We provide several pieces of evidence for the intramolecular character of this transfer, including competition experiments. Our studies should be interesting not only from the theoretical and mechanistic point of view but also for the design of new (1)O2 donors and applications in PDT.

New singlet oxygen donors based on naphthalenes: synthesis, physical chemical data, and improved stability

Singlet oxygen donors are of current interest for medical applications, but suffer from a short half-life leading to low singlet oxygen yields and problems with storage. We have synthesized more than 25 new singlet oxygen donors based on differently substituted naphthalenes in only a few steps. The influence of functional groups on the reaction rate of the photooxygenations, thermolysis, half-life, and singlet oxygen yield has been thoroughly studied. We determined various thermodynamic data and compared them with density functional calculations. Interestingly, remarkable stabilities of functional groups during the photooxygenations and stabilizing effects for some endoperoxides during the thermolysis have been found. Furthermore, we give evidence for a partly concerted and partly stepwise thermolysis mechanism leading to singlet and triplet oxygen, respectively. Our results might be interesting for "dark oxygenations" and future applications in medicine.

Photoactive fluoropolymer surfaces that release sensitizer drug molecules

We describe a physical-organic study of two fluoropolymers bearing a photoreleasable PEGylated photosensitizer that generates (1)O2((1)Δg) [chlorin e6 methoxy tri(ethylene glycol) triester]. The surfaces are Teflon/poly(vinyl alcohol) (PVA) nanocomposite and fluorinated silica. The relative efficiency of these surfaces to photorelease the PEGylated sensitizer [shown previously to be phototoxic to ovarian cancer cells (Kimani, S. et al. J. Org. Chem 2012, 77, 10638)] was slightly higher for the nanocomposite. In the presence of red light and O2, (1)O2 is formed, which cleaves an ethene linkage to liberate the sensitizer in 68-92% yield. The fluoropolymers were designed to deal with multiple problems. Namely, their success relied not only on high O2 solubility and drug repellency but also on the C-F bonds, which physically quench little (1)O2, for singlet oxygen's productive use away from the surface. The results obtained here indicate that Teflon-like surfaces have potential uses in delivering sensitizer and singlet oxygen for applications in tissue repair and photodynamic therapy (PDT).

"Pointsource" delivery of a photosensitizer drug and singlet oxygen: eradication of glioma cells in vitro

We describe a pointsource sensitizer-tipped microoptic device for the eradication of glioma U87 cells. The device has a mesoporous fluorinated silica tip which emits singlet oxygen molecules and small quantities of pheophorbide sensitizer for additional production of singlet oxygen in the immediate vicinity. The results show that the device surges in sensitizer release and photokilling with higher rates about midway through the reaction. This was attributed to a self-amplified autocatalytic reaction where released sensitizer in the extracellular matrix provides positive feedback to assist in the release of additional sensitizer. The photokilling of the glioma cells was analyzed by global toxicity and live/dead assays, where a killing radius around the tip with ~0.3 mm precision was achieved. The implication of these results for a new PDT tool of hard-to-resect tumors, e.g. in the brain, is discussed.

Self-assembled supramolecular nanoparticles mediated by host–guest interactions for photodynamic therapy

Supramolecular nanoparticles formed by calixarene-substituted porphyrin and biviologen were reported, offering a type of photodynamic therapeutic agent with low cytotoxicity and high photo-oxidation efficiency.

Autocatalytic-assisted photorelease of a sensitizer drug bound to a silica support

The photorelease of a sensitizer from a fluorinated silica surface occurs by a reaction of singlet oxygen with the vinyl ether bond linker with scission of a dioxetane intermediate. Irradiation of the released sensitizer generates singlet oxygen, which accelerates the release of more sensitizer via an autocatalytic reaction. Sigmoidal behavior of sensitizer release in n-butanol and n-octanol occurs at an optimal temperature of 20 °C. The photorelease efficiency was reduced at low temperatures, where the sensitizer was retained on the surface due to a long-lived dioxetane with inefficient scission, and also reduced at high temperatures, due to a slower reaction of (1)O2 with the vinyl ether bond. Immediate acceleration is a result of released sensitizer being used as a dopant to eliminate the induction step, further implicating an autocatalytic mechanism. However, the sigmoidal sensitizer release was not correlated to solvent viscosity, heat, or light from the dioxetane decomposition or to minor O2 solubility enhancements caused by the fluorinated silica. The mechanistic information collected here can be used to help control the pace of drug release; however, it remains to be seen whether an autocatalytic-based drug delivery system has an advantage to those with non-sigmoidal kinetics.

A fiberoptic (photodynamic therapy type) device with a photosensitizer and singlet oxygen delivery probe tip for ovarian cancer cell killing

A portable "fiber optic-based sensitizer delivery" (FOSD) device has been developed and studied. Before there might be success in photodynamic therapy (PDT) and antibacterial ambitions, an understanding of basic factors on device performance was needed. Thus, the device was examined for the localized delivery of sensitizer molecules in ovarian cancer cells and production of high concentrations of singlet oxygen for their eradication in vitro. The device tip releases stored pheophorbide by attack of singlet oxygen from sensitized oxygen gas delivered through the hollow fiber using 669 nm laser light. The performance of the device was enhanced when configured with a fluorosilane tip by virtue of its Teflon-like property compared with a conventional glass tip (greater sensitizer quantities were photoreleased and laterally diffused, and greater amounts of ovarian OVCAR-5 cancer cells were killed). No cell damage was observed at 2.2 N of force applied by the probe tip itself, an amount used for many of the experiments described here.

Synthesis and characterization of mono-, di-, and tri-poly(ethylene glycol) chlorin e6 conjugates for the photokilling of human ovarian cancer cells

PEGylated chlorin e(6) photosensitizers were synthesized with tri(ethylene glycol) attached at the ester bond(s) for a 1:1 conjugate at the 17(3)-position, a 2:1 conjugate at the 15(2)- and 17(3)-positions, and a 3:1 conjugate at the 13(1)-, 15(2)-, and 17(3)-positions. These chlorin sensitizers were studied for hydrolytic stability and solubility, as well as ovarian OVCAR-5 cancer cell uptake, localization, and phototoxicity. Increasing numbers of the PEG groups in the mono-, di-, and tri-PEG chlorin conjugates increased the water solubility and sensitivity to hydrolysis and uptake into the ovarian cancer cells. The PEG chlorin conjugates accumulated in the cytoplasm and mitrochondria, but not in lysosomes. Higher phototoxicity was roughly correlated with higher numbers of PEG groups, with the tri-PEG chlorin conjugate showing the best overall ovarian cancer cell photokilling of the series. Singlet oxygen lifetimes, solvent deuteration, and the effects of additives azide ion and d-mannitol were examined to help clarify the photokilling mechanisms. A Type-II (singlet oxygen) photosensitized mechanism is suggested for the di- and tri-PEG chlorin conjugates; however, a more complicated process based in part on a Type-I (radicals or radical ions) mechanism is suggested for the parent chlorin e(6) and the mono-PEG chlorin conjugate.