"Nok": a phytosterol-based amphiphile enabling transition-metal-catalyzed couplings in water at room temperature

"On-Water" accelerated dearomative cycloaddition via aquaphotocatalysis

Sulfur(VI) fluoride exchange (SuFEx) has emerged as an innovative click chemistry to harness the pivotal connectivity of sulfonyl fluorides. Synthesizing such alkylated S(VI) molecules through a straightforward process is of paramount importance, and their water-compatibility opens the door to a plethora of applications in biorelevant and materials chemistry. Prior aquatic endeavors have primarily focused on delivering catalysts involving ionic mechanisms, studies regarding visible-light photocatalytic transformation are unprecedented. Herein we report an on-water accelerated dearomative aquaphotocatalysis for heterocyclic alkyl SuFEx hubs. Notably, water exerts a pronounced accelerating effect on the [2 + 2] cycloaddition between (hetero)arylated ethenesulfonyl fluorides and inert heteroaromatics. This phenomenon is likely due to the high-pressure-like reactivity amplification at the water-oil interface. Conventional solvents proved totally ineffective, leading to the isomerization of the starting material.

Activation of fluoride anion as nucleophile in water with data-guided surfactant selection

A principal component surfactant_map was developed for 91 commonly accessible surfactants for use in surfactant-enabled organic reactions in water, an important approach for sustainable chemical processes. This map was built using 22 experimental and theoretical descriptors relevant to the physicochemical nature of these surfactant-enabled reactions, and advanced principal component analysis algorithms. It is comprised of all classes of surfactants, i.e. cationic, anionic, zwitterionic and neutral surfactants, including designer surfactants. The value of this surfactant_map was demonstrated in activating simple inorganic fluoride salts as effective nucleophiles in water, with the right surfactant. This led to the rapid development (screening 13-15 surfactants) of two fluorination reactions for β-bromosulfides and sulfonyl chlorides in water. The latter was demonstrated in generating a sulfonyl fluoride with sufficient purity for direct use in labelling of chymotrypsin, under physiological conditions.

Nanoparticles as Heterogeneous Catalysts for ppm Pd-Catalyzed Aminations in Water

A general protocol employing heterogeneous catalysis has been developed that enables ppm of Pd-catalyzed C-N cross-coupling reactions under aqueous micellar catalysis. A new nanoparticle catalyst containing specifically ligated Pd, in combination with nanoreactors composed of the designer surfactant Savie, a biodegradable amphiphile, catalyzes C-N bond formations in recyclable water. A variety of coupling partners, ranging from highly functionalized pharmaceutically relevant APIs to educts from the Merck Informer Library, readily participate under these environmentally responsible, sustainable reaction conditions. Other key features associated with this report include the low levels of residual Pd found in the products, the recyclability of the aqueous reaction medium, the use of ocean water as an alternative source of reaction medium, options for the use of pseudohalides as alternative reaction partners, and associated low E factors. In addition, an unprecedented 5-step, one-pot sequence is presented, featuring several of the most widely used transformations in the pharmaceutical industry, suggesting potential industrial applications.

Application of an Oscillatory Plug Flow Reactor to Enable Scalable and Fast Reactions in Water Using a Biomass-Based Polymeric Additive

The utilization of water as a sustainable reaction medium has important advantages over traditional organic solvents. Hydroxypropyl methylcellulose has emerged as a biomass-based polymeric additive that enables organic reactions in water through hydrophobic effects. However, such conditions imply slurries as reaction mixtures, where the efficacy of mass transfer and mixing decreases with increasing vessel size. In order to circumvent this limitation and establish an effectively scalable platform for performing hydroxypropyl methylcellulose-mediated aqueous transformations, we utilized oscillatory plug flow reactors that feature a smart dimensioning design principle across different scales. Using nucleophilic aromatic substitutions as valuable model reactions, rapid parameter optimization was performed first in a small-scale instrument having an internal channel volume of 5 mL. The optimal conditions were then directly transferred to a 15 mL reactor, achieving a three-fold scale-up without re-optimizing any reaction parameters. By precisely fine-tuning the oscillation parameters, the system achieved optimal homogeneous suspension of solids, preventing settling of particles and clogging of process channels. Ultimately, this resulted in a robust and scalable platform for performing multiphasic reactions under aqueous conditions.

Exploration of the Copper-Catalyzed Sydnone and Sydnonimine-Alkyne Cycloaddition Reactions by High-Throughput Experimentation

The reactivity of sydnones and sydnonimines toward terminal alkynes under copper catalysis has been explored using High-Throughput-Experimentation. A large panel of ligands and reaction conditions have been tested to optimize the copper-catalyzed sydnone click reaction discovered by our group ten years ago. This screening approach led to the identification of new ligands, which boosted the catalytic properties of copper and allowed the discovery of a new copper-catalyzed click-and-release reaction involving sydnonimines. This reaction allowed chemoselective ligation of terminal alkynes with sydnonimines and, simultaneously, the release of an isocyanate fragment molecule that can be used for further transformations.

Micellar catalysis: a green solution to enable undirected and mild C-H activation of (oligo)thiophenes at the challenging β-position

The unexpected potential of micellar medium to achieve challenging β-selective direct arylation of (oligo)thiophenes is reported. Thanks to the use of a water/surfactant solution in combination with natural feedstock-derived undecanoic acid as an additive, this high-yielding C-H coupling could be performed regioselectively at room temperature.

Is Micellar Catalysis Green Chemistry?

Many years ago, twelve principles were defined for carrying out chemical reactions and processes from a green chemistry perspective. It is everyone's endeavor to take these points into account as far as possible when developing new processes or improving existing ones. Especially in the field of organic synthesis, a new area of research has thus been established: micellar catalysis. This review article addresses the question of whether micellar catalysis is green chemistry by applying the twelve principles to micellar reaction media. The review shows that many reactions can be transferred from an organic solvent to a micellar medium, but that the surfactant also has a crucial role as a solubilizer. Thus, the reactions can be carried out in a much more environmentally friendly manner and with less risk. Moreover, surfactants are being reformulated in their design, synthesis, and degradation to add extra advantages to micellar catalysis to match all the twelve principles of green chemistry.

Aqueous micellar technology: an alternative beyond organic solvents

Solvents are the major source of chemical waste from synthetic chemistry labs. Growing attention to more environmentally friendly sustainable processes demands novel technologies to substitute toxic or hazardous solvents. If not always, sometimes, water can be a suitable substitute for organic solvents, if used appropriately. However, the sole use of water as a solvent remains non-practical due to its incompatibility with organic reagents. Nonetheless, over the past few years, new additives have been disclosed to achieve chemistry in water that also include aqueous micelles as nanoreactors. Although one cannot claim micellar catalysis to be a greener technology for every single transformation, it remains the sustainable or greener alternative for many reactions. Literature precedents support that micellar technology has much more potential than just as a reaction medium, i.e., the role of the amphiphile as a ligand obviating phosphine ligands in catalysis, the shielding effect of micelles to protect water-sensitive reaction intermediates in catalysis, and the compartmentalization effect. While compiling the powerful impact of micellar catalysis, this article highlights two diverse recent technologies: (i) the design and employment of the surfactant PS-750-M in selective catalysis; (ii) the use of the semisynthetic HPMC polymer to enable ultrafast reactions in water.

Introducing Savie: A Biodegradable Surfactant Enabling Chemo- and Biocatalysis and Related Reactions in Recyclable Water

Savie is a biodegradable surfactant derived from vitamin E and polysarcosine (PSar) developed for use in organic synthesis in recyclable water. This includes homogeneous catalysis (including examples employing only ppm levels of catalyst), heterogeneous catalysis, and biocatalytic transformations, including a multistep chemoenzymatic sequence. Use of Savie frequently leads to significantly higher yields than do conventional surfactants, while obviating the need for waste-generating organic solvents.

Contemporary progress in the green synthesis of spiro-thiazolidines and their medicinal significance: a review

The development of new strategies for the production of nitrogen and sulfur-containing heterocycles remains an extremely alluring but challenging proposition. Among these heterocyclic compounds, spiro-thiazolidines are a distinct class of heterocyclic motifs with an all-encompassing range of pharmaceutical activities such as anti-histaminic, anti-proliferative, anesthetic, hypnotic, anti-fungal, anti-inflammatory, anti-HIV, anthelmintic, CNS stimulant, and anti-viral potentials. Consequently, investigators have produced these heterocycles through diversified intricate pathways as object structures for medicinal studies. Notwithstanding their innumerable manmade solicitations, there is yet no special periodical on MCRs concerning spiro-thiazolidine via green synthesis. Thus, this in-depth review encompasses the excursion of MCRs to spiro-thiazolidines, including the environment-friendly synthetic approaches, reaction situations, rationale behind the optimal selection of catalyst, scope, anticipated mechanism, and biological activities. In this review, we have focussed on the furthermost current developments in spiro-thiazolidine creation under different conditions, such as ionic liquid-assisted, microwave-assisted, on-water, solid-supported acid-catalyzed, asymmetric, and nanocatalyst-assisted syntheses, developed over the last 8 years. This study details works regarding the total amalgamation of spiro-thiazolidines under N- and S-containing heterocycles. Furthermore, this article summarizes the developments of artificially and pharmaceutically important spiro-thiazolidine candidates.

Micellar Catalysis as a Tool for C-H Bond Functionalization toward C-C Bond Formation

Micelles generated upon dissolving surfactants in water can be employed as nanovessels for catalytic transformations, in the so-called micellar catalysis methodology. This review is focused on the use of micellar catalysis in the context of the catalytic functionalization of carbon-hydrogen bonds. The micelles accumulate catalyst and reactants in their inner volume in such a high local concentration that kinetics are favored. The consequence is that, in most cases, processes that in conventional organic solvents require high temperatures and long reaction times are achieved in milder conditions when micellar catalysis is employed.

Energy-Saving Pathways for Thermoelectric Nanomaterial Synthesis: Hydrothermal/Solvothermal, Microwave-Assisted, Solution-Based, and Powder Processing

The pillars of Green Chemistry necessitate the development of new chemical methodologies and processes that can benefit chemical synthesis in terms of energy efficiency, conservation of resources, product selectivity, operational simplicity and, crucially, health, safety, and environmental impact. Implementation of green principles whenever possible can spur the growth of benign scientific technologies by considering environmental, economical, and societal sustainability in parallel. These principles seem especially important in the context of the manufacture of materials for sustainable energy and environmental applications. In this review, the production of energy conversion materials is taken as an exemplar, by examining the recent growth in the energy-efficient synthesis of thermoelectric nanomaterials for use in devices for thermal energy harvesting. Specifically, "soft chemistry" techniques such as solution-based, solvothermal, microwave-assisted, and mechanochemical (ball-milling) methods as viable and sustainable alternatives to processes performed at high temperature and/or pressure are focused. How some of these new approaches are also considered to thermoelectric materials fabrication can influence the properties and performance of the nanomaterials so-produced and the prospects of developing such techniques further.

Cascade Processes with Micellar Reaction Media: Recent Advances and Future Directions

Reducing the use of solvents is an important aim of green chemistry. Using micelles self-assembled from amphiphilic molecules dispersed in water (considered a green solvent) has facilitated reactions of organic compounds. When performing reactions in micelles, the hydrophobic effect can considerably accelerate apparent reaction rates, as well as enhance selectivity. Here, we review micellar reaction media and their potential role in sustainable chemical production. The focus of this review is applications of engineered amphiphilic systems for reactions (surface-active ionic liquids, designer surfactants, and block copolymers) as reaction media. Micelles are a versatile platform for performing a large array of organic chemistries using water as the bulk solvent. Building on this foundation, synthetic sequences combining several reaction steps in one pot have been developed. Telescoping multiple reactions can reduce solvent waste by limiting the volume of solvents, as well as eliminating purification processes. Thus, in particular, we review recent advances in “one-pot” multistep reactions achieved using micellar reaction media with potential applications in medicinal chemistry and agrochemistry. Photocatalyzed reactions in micellar reaction media are also discussed. In addition to the use of micelles, we emphasize the process (steps to isolate the product and reuse the catalyst).

Entropy reduction from strong localization - an explanation for enhanced reaction rates of organic synthesis in aqueous micelles

HYPOTHESIS

The underlying mechanism for increased reaction rates in micellar catalysis-based organic synthesis is a reduced entropy barrier for the reaction. A two-dimensional localization of reactants and catalyst in the surfactant micelle reduces the translational entropy of all components. The entropy is reduced less for the reaction intermediate than for the reactants, which leads to the lower barrier.

SIMULATIONS

Quantum chemistry, the COSMO-RS implicit solvent model and statistical thermodynamics were employed to predict the stability of a range of reactants, catalysts and intermediates in a series of surfactant micelles. The localized stability in the linker region between the lipophilic and hydrophilic regions and the resulting decrease in entropy were also calculated.

FINDINGS

The predicted reaction rates for the proposed mechanism show that the entropy reduction leads to a larger prefactor for the reaction. The resulting reaction rate can be significantly higher than conventional organic synthesis in an organic solvent even when the smaller reaction volume and lower reaction temperatures typically needed under micellar catalysis conditions are considered. The results are general across a wide range of types of reactions, reactants and catalysts and a selection of surfactants commonly used in organic synthesis, strongly supporting the hypothesis.

Replacement of Less-Preferred Dipolar Aprotic and Ethereal Solvents in Synthetic Organic Chemistry with More Sustainable Alternatives

Dipolar aprotic and ethereal solvents comprise just over 40% of all organic solvents utilized in synthetic organic, medicinal, and process chemistry. Unfortunately, many of the common "go-to" solvents are considered to be "less-preferable" for a number of environmental, health, and safety (EHS) reasons such as toxicity, mutagenicity, carcinogenicity, or for practical handling reasons such as flammability and volatility. Recent legislative changes have initiated the implementation of restrictions on the use of many of the commonly employed dipolar aprotic solvents such as dimethylformamide (DMF) and N-methyl-2-pyrrolidinone (NMP), and for ethers such as 1,4-dioxane. Thus, with growing legislative, EHS, and societal pressures, the need to identify and implement the use of alternative solvents that are greener, safer, and more sustainable has never been greater. Within this review, the ubiquitous nature of dipolar aprotic and ethereal solvents is discussed with respect to the physicochemical properties that have made them so appealing to synthetic chemists. An overview of the current legislative restrictions being imposed on the use of dipolar aprotic and ethereal solvents is discussed. A variety of alternative, safer, and more sustainable solvents that have garnered attention over the past decade are then examined, and case studies and examples where less-preferable solvents have been successfully replaced with a safer and more sustainable alternative are highlighted. Finally, a general overview and guidance for solvent selection and replacement are included in the Supporting Information of this review.

Water-Sculpting of a Heterogeneous Nanoparticle Precatalyst for Mizoroki-Heck Couplings under Aqueous Micellar Catalysis Conditions

Powdery, spherical nanoparticles (NPs) containing ppm levels of palladium ligated by t-Bu₃P, derived from FeCl₃, upon simple exposure to water undergo a remarkable alteration in their morphology leading to nanorods that catalyze Mizoroki-Heck (MH) couplings. Such NP alteration is general, shown to occur with three unrelated phosphine ligand-containing NPs. Each catalyst has been studied using X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), and cryogenic transmission electron microscopy (cryo-TEM) analyses. Couplings that rely specifically on NPs containing t-Bu₃P-ligated Pd occur under aqueous micellar catalysis conditions between room temperature and 45 °C, and show broad substrate scope. Other key features associated with this new technology include low residual Pd in the product, recycling of the aqueous reaction medium, and an associated low E Factor. Synthesis of the precursor to galipinine, a member of the Hancock family of alkaloids, is suggestive of potential industrial applications.

Water as the reaction medium in organic chemistry: from our worst enemy to our best friend

A review presenting water as the logical reaction medium for the future of organic chemistry. A discussion is offered that covers both the "on water" and "in water" phenomena, and how water is playing unique roles in each, specifically with regard to its use in organic synthesis.

Surfactant-mediated thioglycosylation of 1-hydroxy sugars in water

Thioglycosides are an important class of sugars, since they can be used as non-ionic biosurfactants, biomimetic glycosides, and building blocks for carbohydrate synthesis. Previously, Brønsted- or Lewis-acid-catalyzed dehydrative glycosylations between a 1-hydroxy sugar and a thiol have been reported to yield open-chain dithioacetal sugars as the major products instead of the desired thioglycosides. These dithioacetal sugars are by-products derived from the endocyclic bond cleavage of the thioglycosides. Herein, we report dehydrative glycosylation in water mediated by a Brønsted acid-surfactant combined catalyst (BASC). Glycosylations between 1-hydroxy furanosyl/pyranosyl sugars and primary, secondary, and tertiary aliphatic/aromatic thiols in the presence of dodecyl benzenesulfonic acid (DBSA) provided the thioglycoside products in moderate to good yields. Microwave irradiation led to improvements in the yields and a shortening of the reaction time. Remarkably, open-chain dithioacetal sugars were not detected in the DBSA-mediated glycosylations in water. This method is a simple, convenient, and rapid approach to produce a library of thioglycosides without the requirement of anhydrous conditions. Moreover, this work also provides an excellent example of complementary reactivity profiles of glycosylation in organic solvents and water.

Recent advances on micellar catalysis in water

Water is the universal solvent in nature to catalyze the biological transformation processes. However, owing to the immiscibility of many reagents in water, synthesis chemistry relies heavily on organic solvent. Micellar media is a green alternative to traditional petroleum feedstock derived solvents, which is recently attracting increasing research attention. The present review deals with the recent advances in micellar catalysis with an emphasis on the new "tailor-made" surfactants for various reactions. A brief overview of commercial surfactants, including anionic micelles, cationic micelles, and nonionic micelles is presented. More importantly, an attempt was made to discuss systematically the recent research progress on new surfactants by introducing structures, micellar effects and recycling process, aiming to serve as the basis for future development of surfactants.

Toward the Identification of Novel Antimicrobial Agents: One-Pot Synthesis of Lipophilic Conjugates of N-Alkyl d- and l-Iminosugars

In the effort to improve the antimicrobial activity of iminosugars, we report the synthesis of lipophilic iminosugars 10a-b and 11a-b based on the one-pot conjugation of both enantiomeric forms of N-butyldeoxynojirimycin (NBDNJ) and N-nonyloxypentyldeoxynojirimycin (NPDNJ) with cholesterol and a succinic acid model linker. The conjugation reaction was tuned using the established PS-TPP/I2/ImH activating system, which provided the desired compounds in high yields (94-96%) by a one-pot procedure. The substantial increase in the lipophilicity of 10a-b and 11a-b is supposed to improve internalization within the bacterial cell, thereby potentially leading to enhanced antimicrobial properties. However, assays are currently hampered by solubility problems; therefore, alternative administration strategies will need to be devised.

Potential application of Micellar nanoreactor for electron transfer reactions mediated by a variety of oxidants: A review

Surfactant, either natural or synthetic, forms a different type of aggregates among which 'Micelle' is truly an important dynamic surfactant aggregate, having a different region to interact with several organic, inorganic, and biomolecules; therefore the practical use of micelle is rapidly growing day-to-day. Surfactant-micelle, looks like a reactor of nano-dimension, govern a variety of reactions in aqueous media extensively. Oxidation is one of the vital reaction, take a part in the course of several organic transformations which are not very easy to execute in water media alone due to the solubility problem. Moreover, in order to achieve a quick transformation overcoming several difficulties the utility of micellar media became an excellent innovation, that's why nowadays, the surfactant and its aggregates are a focus of interest to the researcher of synthetic field and thus its practical applicability has been tremendously cultivated over the few decades. It is, therefore, useful to introduce some basic concepts regarding the aggregation of surfactants. Subsequently, we emphasize the importance of micellar media on the kinetics of oxidation reactions mediated by several metal ions with a special emphasis on their catalytic role.

Nickel Nanoparticle Catalyzed Mono- and Di-Reductions of gem-Dibromocyclopropanes Under Mild, Aqueous Micellar Conditions

Mild mono- and di-hydrodehalogenative reductions of gem-dibromocyclopropanes are described, providing an easy and green approach towards the synthesis of cyclopropanes. The methodology utilizes 0.5-5 mol % TMPhen-nickel as the catalyst, which, when activated with a hydride source such as sodium borohydride, cleanly and selectively dehalogenates dibromocyclopropanes. Double reduction proceeds in a single operation at temperatures between 20-45 °C and at atmospheric pressure in an aqueous designer surfactant medium. At lower loading and either in the absence of ligand or in the presence of 2,2'-bipyridine, this new technology can also be used to gain access to not only monobrominated cyclopropanes, interesting building blocks for further use in synthesis, but also mono- or di-deuterated analogues. Taken together, this base-metal-catalyzed process provides access to cyclopropyl-containing products and is achieved under environmentally responsible conditions.

Decision making for promising quinoline-based anticancer agents through combined methodology

During the development of effective drugs for the treatment of cancer, one of the most important tasks is to identify effective drug candidates having maximum antiproliferation and minimum side effects. This paper considers the problem of selecting the most promising anticancer agents, showing inhibition at low IC50 concentration and low releasing lactate dehydrogenase percentage (cytotoxicity). Recently, we prepared quinoline analogs bearing different functional groups and determined their anticancer potential against the HeLa, C6, and HT29 cancer cell lines using different anticancer assays. Experimentally, seven quinoline derivatives consisting of different substituents were determined as promising anticancer agents. We propose a multicriteria recommendation method to identify the most promising anticancer agents against all tested cell lines with an accurate prediction algorithm according to the available input data. A multicriteria decision-making methodology (MCDM) was used for the solution of the relevant problem in this study. Both the experimental results and MCDM method indicated that 5,7-dibromo-8-hydroxyquinoline (2) and 6,8-dibromo-1,2,3,4-tetrahydroquinoline (6) are the most promising anticancer agents against the HeLa, HT29, and C6 cell lines.

Synthesis of Conjugated Polymers by Sustainable Suzuki Polycondensation in Water and under Aerobic Conditions

Conjugated semiconducting polymers are key materials enabling plastic (opto)electronic devices. Research in the field has a generally strong focus on the constant improvement of backbone structure and the resulting properties. Comparatively fewer studies are devoted to improving the sustainability of the synthetic route that leads to a material under scrutiny. Exemplified by the two established and commercially available luminescent polymers poly(9,9-dioctylfluorene-alt-bithiophene) (PF8T2) and poly(9,9-dioctylfluorene-alt-benzothiadiazole) (PF8BT), this work describes the first examples of efficient Suzuki-Miyaura polycondensations in water, under ambient environment, with minimal amount of organic solvent and with moderate heating. The synthetic approach enables a reduction of the E-factor (mass of organic waste/mass of product) by 1 order of magnitude, without negatively affecting molecular weight, dispersity, chemical structure, or photochemical stability of PF8T2 or PF8BT.

High Fidelity Suzuki-Miyaura Coupling for the Synthesis of DNA Encoded Libraries Enabled by Micelle Forming Surfactants

DNA encoded chemical libraries provide a highly efficient means of screening vast numbers of small molecules against an immobilized protein target. Their potential is currently restricted by the constraints of carrying out library synthesis in the presence of attached DNA tags, for which a limited number of reactions and substrates can be used. Even established reactions, such as Suzuki-Miyaura couplings, do not give efficient coupling reactions across a wide range of substrates and can lead to significant DNA degradation. We developed an efficient protocol for carrying out Suzuki-Miyaura couplings on DNA tagged substrates that proceeds with unprecedented efficiency to the desired biaryl products (>98% on average with no detectable DNA degradation) across a wide range of drug-like substrates using a micellar promoted process with commercial TPGS-750-M surfactant. We have demonstrated the applicability of this method in DEL synthesis by preparing a prototypical two-dimensional 36-member library employing the Suzuki-Miyaura coupling methodology as the final library synthesis step. This work shows, for the first time, that standard micellar surfactants can promote reactions for encoded library synthesis, leading to libraries of exceptional fidelity, and demonstrates the potential to expand the range of accessible DNA compatible chemistry.

Recent designer surfactants for catalysis in water

Recent development of new designer surfactants further spurs the development of micellar catalysis in water for chemical transformations and catalysis, providing reliable alternatives to the employment of organic solvents.

Making natural products from renewable feedstocks: back to the roots?

This review highlights the utilization of biomass-derived building blocks in the total synthesis of natural products.