Nonafluorobutanesulfonyl Azide as a Shelf-Stable Highly Reactive Oxidant for the Copper-Catalyzed Synthesis of 1,3-Diynes from Terminal Alkynes

Highly selective cross-coupling reactions of 1,1-dibromoethylenes with alkynylaluminums for the synthesis of aryl substituted conjugated enediynes and unsymmetrical 1,3-diynes

A highly efficient method for the synthesis of aryl substituted conjugated enediynes and unsymmetrical 1,3-diynes via selective cross-coupling reactions of 1,1-dibromoethylenes with alkynylaluminums using the Pd(OAc)2-DPPE and Pd2(dba)3-TFP complexes as catalysts, respectively, has been successfully developed. Though the alkyl substituted conjugated enediynes and unsymmetrical 1,3-diynes were not obtained, this case is also remarkable as the same starting materials could selectively produce either aryl substituted conjugated enediynes or unsymmetrical 1,3-diynes in moderate to excellent yields (up to 99%) in the different Pd-phosphine catalytic systems.

Cu(I)-azidopyrrolo[3,2-d]pyrimidine Catalyzed Glaser-Hay Reaction under Mild Conditions

The limitation of the CuAAC "click" reaction with a 2-azidopyridine substrate, owing to its equilibrium with a tetrazole isomer, is exploited herein for its utility in the Glaser-Hay reaction. A catalytic combination of a 2-azidopyridine analogue, 4-azido-5H-pyrrolo[3,2-d]pyrimidine, and CuI afforded homocoupled products of terminal alkynes, without any trace of triazole product, under mild conditions with a broad substrate scope. Emphasis on carbohydrate-based substrates appended to a propargylic group led to 1,3-diynes in good to excellent yields.

Unexpected Reactions of Terminal Alkynes in Targeted "Click Chemistry'' Coppercatalyzed Azide-alkyne Cycloadditions

BACKGROUND

High efficiency in terms of reaction yield and purity has led to the extensive utilization of copper-catalyzed azide-alkyne cycloaddition (CuAAC) in various fields of chemistry. Its compatibility with low molecular weight alcohols promotes the application in surfactant synthesis to tackle the miscibility constraints of the reactants.

OBJECTIVE

For the tuning of surfactant properties, double click coupling of the antipode precursors was attempted. Failure of the CuAAC to provide the targeted product in combination with unexpected reaction outputs led to an investigation of the side reaction.

METHODS

The CuAAC-based coupling of sugar azide with propargyl building block in the presence of copper- (I) catalyst exclusively led to the mono-coupling product in a respectable yield of almost 80%. Besides the unexpected incomplete conversion, the loss of the remaining propargyl group, as indicated by both NMR and MS. On the other hand, application of substantial amounts of CuSO4 under reducing conditions in refluxing toluene/water furnished the alkyne dimer in a moderate yield of 43%, while no change of azide compound was noticed.

RESULTS

The Cu(I)-catalyst applied for azide-alkyne cycloadditions enables the homo-coupling of certain terminal alkynes at a higher temperature. Moreover, aromatic propargyl ethers may be cleaved to furnish the corresponding phenol. The copper-catalyzed coupling appeared highly sensitive towards the alkyne compound. Only selected derivatives of propargyl alcohol were successfully dimerized.

CONCLUSIONS

The observed failure of the Huisgen reaction for the synthesis of sugar-based surfactants may indicate non-recognized constrains of the reaction, which could affect its wide application in bioconjugation. The temperature requirement for the alternative dimerization of terminal alkynes renders this side reaction nonrelevant for typical click couplings, while narrow substrate diversity and moderate yield limit its synthetic application.

Thermal Stability and Explosive Hazard Assessment of Diazo Compounds and Diazo Transfer Reagents

Despite their wide use in academia as metal-carbene precursors, diazo compounds are often avoided in industry owing to concerns over their instability, exothermic decomposition, and potential explosive behavior. The stability of sulfonyl azides and other diazo transfer reagents is relatively well understood, but there is little reliable data available for diazo compounds. This work first collates available sensitivity and thermal analysis data for diazo transfer reagents and diazo compounds to act as an accessible reference resource. Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and accelerating rate calorimetry (ARC) data for the model donor/acceptor diazo compound ethyl (phenyl)diazoacetate are presented. We also present a rigorous DSC dataset with 43 other diazo compounds, enabling direct comparison to other energetic materials to provide a clear reference work to the academic and industrial chemistry communities. Interestingly, there is a wide range of onset temperatures (T _onset) for this series of compounds, which varied between 75 and 160 °C. The thermal stability variation depends on the electronic effect of substituents and the amount of charge delocalization. A statistical model is demonstrated to predict the thermal stability of differently substituted phenyl diazoacetates. A maximum recommended process temperature (T _D24) to avoid decomposition is estimated for selected diazo compounds. The average enthalpy of decomposition (ΔH _D) for diazo compounds without other energetic functional groups is -102 kJ mol^-1. Several diazo transfer reagents are analyzed using the same DSC protocol and found to have higher thermal stability, which is in general agreement with the reported values. For sulfonyl azide reagents, an average ΔH _D of -201 kJ mol^-1 is observed. High-quality thermal data from ARC experiments shows the initiation of decomposition for ethyl (phenyl)diazoacetate to be 60 °C, compared to that of 100 °C for the common diazo transfer reagent p-acetamidobenzenesulfonyl azide (p-ABSA). The Yoshida correlation is applied to DSC data for each diazo compound to provide an indication of both their impact sensitivity (IS) and explosivity. As a neat substance, none of the diazo compounds tested are predicted to be explosive, but many (particularly donor/acceptor diazo compounds) are predicted to be impact-sensitive. It is therefore recommended that manipulation, agitation, and other processing of neat diazo compounds are conducted with due care to avoid impacts, particularly in large quantities. The full dataset is presented to inform chemists of the nature and magnitude of hazards when using diazo compounds and diazo transfer reagents. Given the demonstrated potential for rapid heat generation and gas evolution, adequate temperature control and cautious addition of reagents that begin a reaction are strongly recommended when conducting reactions with diazo compounds.

Cu/Cu2O Nanoparticles Supported on a Phenol-Pyridyl COF as a Heterogeneous Catalyst for the Synthesis of Unsymmetrical Diynes via Glaser-Hay Coupling

Covalent organic frameworks (COFs) are a new class of porous crystalline polymers with a modular construct that favors functionalization. COF pores can be used to grow nanoparticles (nPs) with dramatic size reduction, stabilize them as dispersions, and provide excellent nP access. Embedding substrate binding sites in COFs can generate host-guest synergy, leading to enhanced catalytic activity. In this report, Cu/Cu₂O nPs (2-3 nm) are grown on a COF, which is built by linking a phenolic trialdehyde and a triamine through Schiff bonds. Their micropores restrict the nP to exceptionally small sizes (∼2-3 nm), and the pore walls decorated with strategically positioned hydrogen-bonding phenolic groups anchor the substrates via hydrogen-bonding, whereas the basic pyridyl sites serve as cationic species to stabilize the [Cu_clusterCl₂]^2- type reactive intermediates. This composite catalyst shows high activity for Glaser-Hay heterocoupling reactions, an essential 1,3-diyne yielding reaction with widespread applicability in organic synthesis and material science. Despite their broad successes in homocoupled products, preparation of unsymmetrical 1,3-diynes is challenging due to poor selectivity. Here, our COF-based Cu catalyst shows elevated selectivity toward heterocoupling product(s) (Cu nP loading 0.0992 mol %; turn over frequency: ∼45-50; turn over number: ∼175-190). The reversible redox activity at the Cu centers has been demonstrated by carrying out X-ray photoelectron spectroscopy on the frozen reactions, whereas the crucial interactions between the substrates and the binding sites in their optimized configurations have been modeled using density functional theory methods. This report emphasizes the utility of COFs in developing a heterogeneous catalyst for a truly challenging organic heterocoupling reaction.

Diazo-Transfer Reagent 2-Azido-4,6-dimethoxy-1,3,5-triazine Displays Highly Exothermic Decomposition Comparable to Tosyl Azide

2-Azido-4,6-dimethoxy-1,3,5-triazine (ADT) was reported recently as a new "intrinsically safe" diazo-transfer reagent. This assessment was based on differential scanning calorimetry data indicating that ADT exhibits endothermic decomposition. We present DSC data on ADT that show exothermic decomposition with an initiation temperature ( T_init) of 159 °C and an enthalpy of decomposition (Δ H_D) of -1135 J g^-1 (-207 kJ mol^-1). We conclude that ADT is potentially explosive and must be treated with caution, being of comparable exothermic magnitude to tosyl azide (TsN₃). A maximum recommended process temperature for ADT is 55 °C.

Copper catalyzed oxidative homocoupling of terminal alkynes to 1,3-diynes: a Cu3(BTC)2 MOF as an efficient and ligand free catalyst for Glaser–Hay coupling

An efficient and sustainable methodology for the synthesis of 1,3-diynes has been demonstrated using a Cu₃(BTC)₂ metal organic framework.

Highly efficient synthesis of unsymmetrical 1,3-diynes from organoalane reagents and alkynyl bromides mediated by a nickel catalyst

Highly efficient and simple cross-coupling reactions of alkynylbromides with organoalane reagents for the synthesis of unsymmetrical 1,3-diynes derivatives using Ni(OAc)₂ (2–5 mol%)/(o-furyl)₃P (4–10 mol%) as a catalyst are reported.

A double stranded metal-organic assembly accommodating a pair of water trimers in the host cavity and catalysing Glaser coupling

A supramolecular compound, catena-poly{[Cu2(1,3-μ2-(1a))2(μ2-ter)2(H2O)2]n·(6H2O)n} (1) has been synthesized using (1a) [(1a = N(1),N(3),N(5)-trimethyl-N(1),N(3),N(5)-tris((pyridin-4-yl)methyl)-1,3,5-benzene tricarboxamide] and terephthalate (ter) as the pillaring unit by self-assembly. The terephthalate units are connected by copper(II) ions forming a single strand, while a pair of such strands are then linked by (1a) via two pyridyl terminal arms bound to copper(II) nodes on either side forming a one-dimensional double stranded assembly propagating along the c axis. The compound crystallizes in the Fdd2 space group. The cavity created in the interior of this double strand assembly trap six water molecules and are stabilized by hydrogen bonding with the host. The arrangement of the pair of acyclic water trimers in isolated cavities of (1) is such that it resembles a closed-bracket-like formation. The Hirshfeld surface analysis of (1) reveals the presence of strong intermolecular hydrogen-bonding interactions between one-dimensional ladder-like units and with the water trimer in the host cavity. The copper(II)-containing coordination polymer also acts as an efficient catalyst for the Glaser-Hay homo-coupling reaction.

Studies towards a greener diazo transfer methodology

A mild, efficient and green method has been developed for diazo transfer to β-ketoesters using polystyrene-supported benzenesulfonyl azide, water as solvent and catalytic base.