Six-component reactions for the stereoselective synthesis of 3-arylidene-2-oxindoles via sequential one-pot Ugi/Heck carbocyclization/Sonogashira/nucleophilic addition

Highly regioselective and diastereoselective synthesis of novel pyrazinoindolones via a base-mediated Ugi-N-alkylation sequence

An efficient base-mediated/metal-free approach has been developed for the synthesis of 1-oxo-1,2,3,4-tetrahydropyrazino[1,2-a]indole-3-carboxamide derivatives via intramolecular indole N-H alkylation of novel bis-amide Ugi-adducts. In this protocol the Ugi reaction of (E)-cinnamaldehyde derivatives, 2-chloroaniline, indole-2-carboxylic acid and different isocyanides was designed for the preparation of bis-amides. The main highlight of this study is the practical and highly regioselective preparation of new polycyclic functionalized pyrazino derivatives. This system is facilitated by Na₂CO₃ mediation in DMSO and 100 °C conditions.

Binaphthyl-Stabilized Palladium Nanoparticle-Catalyzed Stereoselective Synthesis of 3-Arylidene-2-oxindoles via One-Pot Heck-like Carbocyclization/Nucleophilic Addition

Stereoselective, one-pot synthesis of 3-arylidene-2-oxindoles has been accomplished via Heck-like carbocyclization/nucleophilic addition of N-(2-iodophenyl)-N-methyl-3-phenylpropiolamide, phenylacetylene, and secondary amine using binaphthyl stabilized palladium nanoparticles (Pd-BNP) as a reusable catalyst. Less reactive aryl bromides generally provided a similar yield of 3-arylidene-2-oxindoles compared with more reactive aryl iodides. The Pd-BNP nanocatalyst has been recovered and recycled for five catalytic cycles with only an insignificant reduction in particle size, reactivity, and reaction yield.

Access to molecular complexity. Multicomponent reactions involving five or more components

The evaluation of the significance of a chemical transformation addresses many factors, including such important characteristics as the number of chemical bonds formed in one step, the reaction time, labour intensity, the cost of reactants and catalysts and so on. The amount of waste produced in the reaction has also gained increasing importance in recent years. Multicomponent reactions (MCRs) occupy a special place as a synthetic tool in modern organic chemistry. These reactions allow the synthesis of target products with complex structures, minimizing labour costs. This review summarizes the literature on multicomponent reactions involving five or more components. The data in the review are classified according to the number of reactants participating in the reaction and the types of reactions. It is worth noting that in some cases, these transformations can be a part of a domino process, making this classification difficult, if not impossible. The structural diversity of the reaction products greatly increases with increasing number of components involved in the MCR, which becomes virtually unlimited when using combinations of MCRs. This review highlights the main trends of past decades in the field of MCRs. The last two decades have witnessed an explosive growth in the number of publications in this area of chemistry.

The bibliography includes 309 references.

The status of isocyanide-based multi-component reactions in Iran (2010-2018)

Isocyanides as key intermediates and magic reactants have been widely applied in organic reactions for direct access to a broad spectrum of remarkable organic compounds. Although the history of these magical compounds dates back more than 100 years, it still has been drawing widespread attention of chemists who confirmed their versatility and effectiveness. Because of their wide spectrum of pharmacological, industrial and synthetic applications, many reactions with the utilization of isocyanides are reported in the literature. In this context, Iranian scientist played a significant role in the growth of isocyanides chemistry. The present review article covers literature from the period starting from 2010 onward and encompasses new synthetic routes and organic transformation involving isocyanides by Iranian researchers. During this period, a diverse range of isocyanide-based multi-component reactions (I-MCRs) has been reported such as a new modification of Ugi, post-Ugi, Passerini and Groebke-Blackburn-Bienayme condensation reactions, isocyanide-based [1 + 4] cycloaddition reactions, isocyanide-acetylene-based MCRs, isocyanide and Meldrum's acid-based MCRs, several unexpected reactions besides green mediums and novel catalytic systems for the synthesis of diverse kinds of pharmaceutically and industrially remarkable heterocyclic and linear organic compounds. This review also emphasizes the neoteric applications of I-MCR for the synthesis of valuable peptide and pseudopeptide scaffolds, enzyme immobilization and functionalization of materials with tailorable properties that can play important roles in the plethora of applications.

Facile synthesis of 2-alkynyl oxazoles via a Ce(OTf)3-catalyzed cascade reaction of alkynyl carboxylic acids with tert-butyl isocyanide

We developed an efficient and novel protocol to synthesize 2-alkynyl oxazoles from tert-butyl isocyanide and alkynyl carboxylic acids. This method allowed the synthesis of diversely functionalized oxazoles under mild reaction conditions, coupled with operational simplicity and these functionalized oxazoles showed a certain degree of biological activity. Moreover, compounds 2b, 2h, 2k, 2n, 2p and 2t exhibited good anticancer activities in human gastric cancer cells (MGC803) and human bladder tumor cells (T24), with IC₅₀ below 20.0 μM.

Direct access to isoxazolino and isoxazolo benzazepines from 2-((hydroxyimino)methyl)benzoic acid via a post-Ugi heteroannulation

A diversity-oriented access to isoxazolino and isoxazolo benzazepines is elaborated via a post-Ugi heteroannulation involving intramolecular 1,3-dipolar cycloaddition reaction of nitrile oxides with alkenes and alkynes. This sequence offers an interesting multicomponent entry to a library of isoxazolino and isoxazolo benzazepines under mild reaction conditions in good to excellent yields.

cis-1,2-Bis(diphenylphosphino)ethylene copper(i) catalyzed C–H activation and carboxylation of terminal alkynes

Reaction of CuX (X = CN, SCN) and cis-1,2-bis(diphenylphosphino)ethylene (dppet) in 1 : 1 molar ratio in DCM–MeOH (50 : 50 V/V) afforded copper(i) complexes. These complexes were shown to be efficient catalysts in comparison to CuCN/CuSCN for the conversion of terminal alkynes into propiolic acids with CO₂ at room temperature.

Metal–organic framework MIL-101 supported bimetallic Pd–Cu nanocrystals as efficient catalysts for chromium reduction and conversion of carbon dioxide at room temperature

A series of bimetallic Pd–Cu nanocrystals supported on the zeolite-type metal–organic framework MIL-101 and their application in the reduction of Cr(vi) to Cr(iii) using formic acid and the conversion of terminal alkynes into propiolic acids with CO₂ are reported.

Metal-mediated post-Ugi transformations for the construction of diverse heterocyclic scaffolds

The Ugi-4CR is by far one of the most successful multicomponent reactions leading to high structural diversity and molecular complexity. However, the reaction mostly affords a linear peptide backbone, enabling post-Ugi transformations as the only solution to rigidify the Ugi-adduct into more drug like species. Not surprisingly, the development of these transformations, leading to new structural frameworks, has expanded rapidly over the last few years. As expected, palladium-catalyzed reactions have received the foremost attention, yet other metals, particularly gold complexes, are fast catching up. This tutorial review outlines the developments achieved in the past decade, highlighting the modifications that are performed in a sequential or domino fashion with emphasis on major concepts, synthetic applications of the derived products as well as mechanistic aspects.

1,1′-Bis(di-tert-butylphosphino)ferrocene copper(i) complex catalyzed C–H activation and carboxylation of terminal alkynes

Reaction of CuX (X = Br, I) and 1,1′-bis(di-tert-butylphosphino) ferrocene (dtbpf) in 1 : 1, 2 : 1 and 6 : 1 molar ratio in DCM–MeOH (50 : 50 V/V) afforded copper(i) complexes. These complexes were shown to be efficient catalysts in comparison with CuI for the conversion of terminal alkynes into propiolic acids with CO₂ at room temperature.

Diversity-oriented synthesis of intensively blue emissive 3-hydroxyisoquinolines by sequential Ugi four-component reaction/reductive Heck cyclization

A convergent approach to highly functionalized 3-hydroxyisoquinolines is reported. The key steps are an Ugi multicomponent reaction and a subsequent intramolecular reductive Heck reaction; these can also be performed as a one-pot procedure. The structures display very interesting properties as blue-fluorescence emitters. Photophysical studies on the absorption and static fluorescence indicate that the substitution pattern on the pyridyl part influences the optical properties only to a minor extent, unless the amide substituent becomes sterically demanding and leads to significant nonradiative deactivation. The donor substitution on the benzo core considerably enhances the fluorescence quantum yields and trimethoxy substitution causes a pronounced redshift of the emission bands. Protonation of the isoquinolyl nitrogen atom causes efficient static quenching of the fluorescence.

Synthesis of functionalized β-lactams and pyrrolidine-2,5-diones through a metal-free sequential Ugi-4CR/cyclization reaction

An efficient approach for the synthesis of functionalized β-lactams and pyrrolidine-2,5-diones was achieved through a sequential Ugi-4CR/cyclization reaction. Diversity-oriented synthesis, good to high yields, easy workup, and short reaction times are advantages of this procedure.

Design and synthesis of anti-cancer cyclopeptides containing triazole skeleton

We describe the design and synthesis of some hypothetical heptapeptides specifically to overcome the neoplastic activity of ras oncogene and their anti-cancer activities were studied. To improve the anti-cancer activity of the synthesized peptides, their structure modifications were done based on a sequential Ugi/Huisgen 1,3-Dipolar cyclization reaction. The cyclopeptides which contained triazole skeleton showed significant anti-cancer activity against cancer cells with mutated ras oncogene such as A549, PC3 and C26 cells. This study clearly shows the importance of triazole skeleton in biological activity of the peptides. It might be possible to overcome the difficulties involved in making complex peptides by employing this elegant chemistry.

Triflic acid-promoted cycloisomerization of 2-alkynylphenyl isothiocyanates and isocyanates: a novel synthetic method for a variety of indole derivatives

A unique method for synthesis of structurally diverse types of indoles involving a triflic acid-promoted cycloisomerization and a Wagner–Meerwein-type rearrangement is described.