Molecule-Induced Homolysis versus “Concerted Oxenoid Oxygen Insertion” in the Oxidation of Organic Compounds by Dimethyldioxirane

Synthesis and Characterization of Bimetallic Nanoclusters Stabilized by Chiral and Achiral Polyvinylpyrrolidinones. Catalytic C(sp3)-H Oxidation

Second-generation chiral-substituted poly-N-vinylpyrrolidinones (CSPVPs) (-)-1R and (+)-1S were synthesized by free-radical polymerization of (3aR,6aR)- and (3aS,6aS)-5-ethenyl-tetrahydro-2,2-dimethyl-4H-1,3-dioxolo[4,5-c]pyrrol-4-one, respectively, using thermal and photochemical reactions. They were produced from respective d-isoascorbic acid and d-ribose. In addition, chiral polymer (-)-2 was also synthesized from the polymerization of (S)-3-(methoxymethoxy)-1-vinylpyrrolidin-2-one. Molecular weights of these chiral polymers were measured using HRMS, and the polymer chain tacticity was studied using ¹³C NMR spectroscopy. Chiral polymers (-)-1R, (+)-1S, and (-)-2 along with poly-N-vinylpyrrolidinone (PVP, MW 40K) were separately used in the stabilization of Cu/Au or Pd/Au nanoclusters. CD spectra of the bimetallic nanoclusters stabilized by (-)-1R and (+)-1S showed close to mirror-imaged CD absorption bands at wavelengths 200-300 nm, revealing that bimetallic nanoclusters' chiroptical responses are derived from chiral polymer-encapsulated nanomaterials. Chemo-, regio-, and stereo-selectivity was found in the catalytic C-H group oxidation reactions of complex bioactive natural products, such as ambroxide, menthofuran, boldine, estrone, dehydroabietylamine, 9-allogibberic acid, and sclareolide, and substituted adamantane molecules, when catalyst Cu/Au (3:1) or Pd/Au (3:1) stabilized by CSPVPs or PVP and oxidant H₂O₂ or t-BuOOH were applied. Oxidation of (+)-boldine N-oxide 23 using NMO as an oxidant yielded 4,5-dehydroboldine 27, and oxidation of (-)-9-allogibberic acid yielded C6,15 lactone 47 and C6-ketone 48.

Dioxiranes: A Half-Century Journey

Dioxiranes are multi-tasking reagents inheriting mild and selective oxygen transfer attributes. These oxidants are accessed from the reaction of ketones with an oxidant and are employed stoichiometrically or catalytically (in...

Mechanism of Ni-Catalyzed Oxidations of Unactivated C(sp3)-H Bonds

The Ni-catalyzed oxidation of unactivated alkanes, including the oxidation of polyethylenes, by meta-chloroperbenzoic acid (mCPBA) occur with high turnover numbers under mild conditions, but the mechanism of such transformations has been a subject of debate. Putative, high-valent nickel-oxo or nickel-oxyl intermediates have been proposed to cleave the C-H bond, but several studies on such complexes have not provided strong evidence to support such reactivity toward unactivated C(sp3)-H bonds. We report mechanistic investigations of Ni-catalyzed oxidations of unactivated C-H bonds by mCPBA. The lack of an effect of ligands, the formation of carbon-centered radicals with long lifetimes, and the decomposition of mCPBA in the presence of Ni complexes suggest that the reaction occurs through free alkyl radicals. Selectivity on model substrates and deuterium-labeling experiments imply that the m-chlorobenzoyloxy radical derived from mCPBA cleaves C-H bonds in the alkane to form an alkyl radical, which subsequently reacts with mCPBA to afford the alcohol product and regenerate the aroyloxy radical. This free-radical chain mechanism shows that Ni does not cleave the C(sp3)-H bonds as previously proposed; rather, it catalyzes the decomposition of mCPBA to form the aroyloxy radical.

Molecule-Induced Radical Formation (MIRF) Reactions-A Reappraisal

Radical chain reactions are commonly initiated through the thermal or photochemical activation of purpose-built initiators, through photochemical activation of substrates, or through well-designed redox processes. Where radicals come from in the absence of these initiation strategies is much less obvious and are often assumed to derive from unknown impurities. In this situation, molecule-induced radical formation (MIRF) reactions should be considered as well-defined alternative initiation modes. In the most general definition of MIRF reactions, two closed-shell molecules react to give a radical pair or biradical. The exact nature of this transformation depends on the σ- or π-bonds involved in the MIRF process, and this Minireview specifically focuses on reactions that transform two σ-bonds into two radicals and a closed-shell product molecule.

Continued Progress towards Efficient Functionalization of Natural and Non-natural Targets under Mild Conditions: Oxygenation by C-H Bond Activation with Dioxirane

The successful isolation and characterization of a dioxirane species in 1988 opened up one of the most attractive methods for the efficient oxidation of simple and/or structurally complex molecules. Dioxirane today rank among the most powerful tools in organic chemistry, with numerous applications in commercially important processes. They were quickly recognized as efficient oxygen transfer agents, especially for epoxidations and for a wide range of O-insertion reactions into C-H bonds. Dioxirane possess catalytic activity and appear as highly (chemo-, regio-, and stereo-) selective oxidants, despite their reactivity under mild and strictly neutral conditions being controlled by a combination of steric and electronic factors. In this review, we discuss some of the most recent and significant developments in the selective homogeneous and heterogeneous oxyfunctionalization of non-activated C-H bonds in hydrocarbons of natural and non-natural targets by using isolated dioxirane or, more generally, by using the ketones (i.e., the dioxirane precursors) as organocatalysts.

Initiation Chemistries in Hydrocarbon (Aut)Oxidation

For the (aut)oxidation of toluene to benzyl hydroperoxide, benzyl alcohol, benzaldehyde, and benzoic acid, the thermochemical profiles for various radical-generating reactions have been compared. A key intermediate in all of these reactions is benzyl hydroperoxide, the heat of formation of which has been estimated by using results from CBS-QB3, G4, and G3B3 calculations. Homolytic O-O bond cleavage in this hydroperoxide is strongly endothermic and thus unlikely to contribute significantly to initiation processes. In terms of reaction enthalpies the most favorable initiation process involves bimolecular reaction of benzyl hydroperoxide to yield hydroxy and benzyloxy radicals along with water and benzaldehyde. The reaction enthalpy and free energy of this process is significantly more favorable than those for the unimolecular dissociation of known radical initiators, such as dibenzoylperoxide or dibenzylhyponitrite.

Enhanced Reactivity in Hydrogen Atom Transfer from Tertiary Sites of Cyclohexanes and Decalins via Strain Release: Equatorial C-H Activation vs Axial C-H Deactivation

Absolute rate constants for hydrogen atom transfer (HAT) from cycloalkanes and decalins to the cumyloxyl radical (CumO(•)) were measured by laser flash photolysis. Very similar reactivities were observed for the C-H bonds of cyclopentane and cyclohexane, while the tertiary C-H bond of methylcyclopentane was found to be 6 times more reactive than the tertiary axial C-H bond of methylcyclohexane, pointing toward a certain extent of tertiary axial C-H bond deactivation. Comparison between the cis and trans isomers of 1,2-dimethylcyclohexane, 1,4-dimethylcyclohexane and decalin provides a quantitative evaluation of the role played by strain release in these reactions. kH values for HAT from tertiary equatorial C-H bonds were found to be at least 1 order of magnitude higher than those for HAT from the corresponding tertiary axial C-H bonds (kH(eq)/kH(ax) = 10-14). The higher reactivity of tertiary equatorial C-H bonds was explained in terms of 1,3-diaxial strain release in the HAT transition state. Increase in torsional strain in the HAT transition state accounts instead for tertiary axial C-H bond deactivation. The results are compared with those obtained for the corresponding C-H functionalization reactions by dioxiranes and nonheme metal-oxo species indicating that CumO(•) can represent a convenient model for the reactivity patterns of these oxidants.

Enhanced reactivity in dioxirane C-H oxidations via strain release: a computational and experimental study

The site selectivities and stereoselectivities of C-H oxidations of substituted cyclohexanes and trans-decalins by dimethyldioxirane (DMDO) were investigated computationally with quantum mechanical density functional theory (DFT). The multiconfiguration CASPT2 method was employed on model systems to establish the preferred mechanism and transition state geometry. The reaction pathway involving a rebound step is established to account for the retention of stereochemistry. The oxidation of sclareolide with dioxirane reagents is reported, including the oxidation by the in situ generated tBu-TFDO, a new dioxirane that better discriminates between C-H bonds on the basis of steric effects. The release of 1,3-diaxial strain in the transition state contributes to the site selectivity and enhanced equatorial C-H bond reactivity for tertiary C-H bonds, a result of the lowering of distortion energy. In addition to this strain release factor, steric and inductive effects contribute to the rates of C-H oxidation by dioxiranes.

Unveiling the role of molecule-assisted homolysis: a mechanistic probe into the chemistry of a bicyclic peroxide

Unlike the reaction of aryl-substituted diazenes, pyrolysis of alkyl-substituted diazenes in the presence of molecular oxygen generates an unexpectedly complex product mixture. Using deuterium labeling studies, in conjunction with quantum calculations, a reasonable mechanistic hypothesis for the decomposition of the resultant [3.3.0] peroxide, and subsequent formation of the keto-alcohol and Z-configured α,β-unsaturated keto-aldehyde, is proposed. Surprisingly, molecule-assisted homolysis plays a key role in this transformation, the details of which are discussed herein.

Anionic halocuprate(II) complexes as catalysts for the oxaziridine-mediated aminohydroxylation of olefins

We have discovered that the oxaziridine-mediated copper-catalyzed aminohydroxylation reaction recently discovered in our laboratories is dramatically accelerated in the presence of halide additives. The use of this more active catalyst system enables the efficient aminohydroxylation of electronically and sterically deactivated styrenes and also enables the use of nonstereogenic 3,3-dialkyl oxaziridines as terminal oxidants in the aminohydroxylation reaction. We present evidence that anionic halocuprate(II) complexes are the catalytically active species responsible for the increased reactivity under these conditions. This unexpected observation has led us to re-evaluate our mechanistic understanding of this reaction. On the basis of the results of a variety of radical trapping experiments, we propose a modified mechanism that involves a homolytic reaction of the olefin with a copper(II)-activated oxaziridine. Together, the observation that anionic additives significantly increase the oxidizing ability of oxaziridines and the recognition of the radical nature of reactions of oxaziridines under these conditions suggest that a variety of new oxidative transformations catalyzed by halocuprate(II) complexes should be possible.

Oxidation of some cage hydrocarbons by dioxiranes. Nature of the transition structure for the reaction of C-H bonds with dimethyldioxirane: a comparison of B3PW91 density functional theory with experiment

Dimethyl- (DMD) and methyl(trifluoromethyl)-dioxiranes were used for oxyfunctionalization of spiro{1',7-cyclopropan-(E)-2-methylbicyclo[2.2.1]heptane} (), tricyclo[3.2.2.0(2,4)]nonane (), exo-endo-endo- () and exo-exo-exo- () heptacyclo[9.3.1.0(2,10).0(3,8).0(4,6).0(5,9).0(12,14)]pentadecane, yielding tertiary alcohols as the main products. The rate constants for oxidation of by DMD were measured and the Arrhenius parameters determined. The DFT theory (B3LYP and B3PW91) using restricted and unrestricted methods was employed to study the oxidation reaction of the C-H bond of cage hydrocarbons , adamantane, and acetone with DMD. The kinetic isotopic effect calculated using unrestricted methods agreed with experiment. The reaction mechanism in terms of the concerted oxygen insertion vs. the radical part is discussed.

Syntheses of (+)-Alismoxide and (+)-4-epi-Alismoxide

The first total syntheses of (+)-alismoxide and (+)-4-epi-alismoxide are reported. Formal chemo-, regio-, and stereoselective addition of water to 10alpha-acetoxy-1alphaH,5betaH-guaia-3,6-diene afforded the target compounds after reduction. The absolute stereochemistry of (+)-alismoxide has been established. The low [alpha](D) +8.6 value indicates that significant amounts of alismoxide result from biosynthetic processes. Furthermore, the structure of the natural guaienediol isolated from Silphium perfoliatum has been corrected to (-)-alismoxide.

Generation of mono- and bis-dioxiranes from 2,3-butanedione

Biacetyl reacts with oxone to give bis-dioxirane [3,3'-dimethyl-3,3'-bidioxirane, 3B] and mono-dioxirane [1-(3-methyl-dioxiran-3-yl)ethanone, 3A)]. Bis-dioxirane 3B is formed when two oxygens are incorporated into biacetyl, while mono-dioxirane 3A incorporated only one. A greater stability is observed in 3B compared to 3A, which is attributed to an alpha-dioxiranyl (anomeric) effect in the former. In contrast, 3A suffers from a destabilizing pi-electron withdrawing effect from the adjacent carbonyl group.

Oxygenation of Alkane C−H Bonds with Methyl(trifluoromethyl)dioxirane: Effect of the Substituents and the Solvent on the Reaction Rate

[Chemical reaction: See text] The mechanism of the oxygenation of alkane C-H bonds with methyl(trifluoromethyl)dioxirane (1a) is studied through the effect of the substituent and solvent on the rate of oxygenation of 2-substituted adamantanes (2). The results suggest a remarkable electron deficiency at the reacting carbon atom in the transition state leading to the regular oxygenation products. The linearity of the Hammett plot reveals that the reaction mechanism does not change within a range of 0.15-0.67 units of sigma(I). A change in the solvent does not affect the distribution of the products, indicating a through-bond transmission of the substituent effect as the origin of the deactivation of the substrate.

The dimethyldioxirane-mediated oxidation of phenylethyne

The product pattern found for the dimethyldioxirane-mediated oxidation of phenylethyne strongly depends on the reaction conditions. Dimethyldioxirane generated in situ from caroate (HSO(5)(-)) and acetone in acetonitrile-water furnishes phenylacetic acid as the main product. With solutions of dimethyldioxirane in acetone, mandelic acid and phenylacetic acid are mainly formed. The relative abundances of the two acids depend on the residual water present in the dimethyldioxirane-acetone solution. Application of thoroughly dried solutions of the reagent effects increased formation of mandelic acid. When phenylethyne is oxidized by dimethyldioxirane transferred into tetrachloromethane, to minimize traces of water even further, oligomeric mandelic acid is obtained. The results are rationalized by the initial formation of phenyloxirene, which is known to equilibrate with phenylformylcarbene and benzoylcarbene. Subsequent Wolff rearrangement produces intermediate phenylketene, which can be trapped by water as phenylacetic acid or suffer from further oxidation to the alpha-lactone of mandelic acid. The alpha-lactone can either react with water to yield mandelic acid or, under anhydrous conditions, to yield oligomeric mandelic acid. In addition to mandelic acid and phenylacetic acid phenylglyoxylic acid, benzoic acid and benzaldehyde are observed as reaction products. The formation of phenylglyoxylic acid by transfer of two oxygen atoms to the unrearranged carbon skeleton of phenylethyne followed by oxygen insertion into the aldehydic C-H bond of the intermediately formed phenylglyoxal is discussed. In a second pathway this acid is formed by partial oxidation of mandelic acid. Benzaldehyde and benzoic acid are explained as products of the oxidative degradation of the alpha-lactone by dimethyldioxirane. Under in situ conditions benzoic acid is also formed by caroate initiated oxidative decarboxylation of phenylglyoxylic acid and/or intermediate phenylglyoxal.

Selective alkane C?H-bond functionalizations utilizing oxidative single-electron transfer and organocatalysis

Alkane C-H-bond functionalization methods not utilizing metal-catalysis are discussed based on experimental and computational data, beginning with molecule-induced homolysis (reactions of alkanes with dioxiranes). Electrophilic reactions are elaborated next with an emphasis on mechanistic details that reveal that many so-called electrophilic C-H or C-C-bond insertions can be rationalized by electron-transfer reactions (inner sphere, H-coupled, and outer sphere). Finally, radical functionalizations utilizing carbon-centered (relatively stable) radicals generated under organocatalytic (phase-transfer catalysis, PTC) conditions are presented as valuable alternatives to other radical-chain alkane functionalizations. The remarkable chemo- and regioselectivities of these PTC radical reactions and the tolerance of high strain in certain aliphatic hydrocarbons make them particularly useful for laboratory-scale halogenations, in particular, iodinations of unactivated alkane C-H-bonds.

Novel pathways for oxygen insertion into unactivated C-H bonds by dioxiranes. Transition structures for stepwise routes via radical pairs and comparison with the concerted pathway

The oxygen insertion into C-H bonds (of methane, isobutane, and acetone) by dioxiranes (parent dioxirane and dimethyldioxirane) to give alcohols was studied with the DFT theory, using both restricted and unrestricted B3LYP methods, and 6-31G(d) and 6-311+G(d,p) basis sets to evaluate the feasibility of stepwise mechanisms and their competition with the concerted counterpart. Confirming previous results by other authors, we have located, with the RB3LYP method, concerted TSs in which the oxygen bound to be inserted interacts very strongly with the hydrogen atom and very weakly with the carbon atom of the C-H bond. These TSs nicely explain all the experimental observations (e.g., configuration retention at the chiral centers), but all of them exhibit an RHF --> UHF wave function instability that preclude considering them as genuine transition structures. We also were able to characterize, with UB3LYP methods, two alternative two-step processes that can lead to final products (alcohol + carbonyl compound) via singlet radical pair intermediates. For the first step of both processes we located genuine diradicaloid TSs, namely, TSs rad,coll and TSs rad,perp, that have stable wave functions. In TSs rad,coll the alkane C-H bond tends to be collinear with the breaking O(1)- - -O(2) bond while in TSs rad,perp the alkane C-H bond is almost perpendicular to the O(1)- - -O(2) bond. The first step, of both processes, can represent an example of a "molecule induced homolysis" reaction: collision between alkane and dioxirane brings about the homolytic cleavage of the dioxirane O-O bond and the hydrogen abstraction follows afterward to produce the diradicaloid TS that then falls down to a singlet radical pair. This hypothesis was fully confirmed by IRC analysis in the case of TSs rad,coll. The possible pathways that lead from the intermediate radical pair to final products are discussed as well as the hypothesis that the radical collinear TSs may collapse directly to products in a "one-step nonconcerted" process. However, diradical mechanisms cannot explain the experimental data as satisfactorily as the concerted pathway does. As for computational predictions about competition of diradical vs concerted mechanisms, they strongly depend (i) on the alkane C-H type, (ii) on whether gas phase or solution is considered, and (iii) on the basis set used for calculations. In short, the concerted TS benefits, with respect to the corresponding diradicaloid TSs, of alkyl substitution at the C-H center, solvation effects, and basis set extension. Actually, in the case of DMD reactions with methane and acetone, the diradicaloid TSs are always (both in gas phase and in solution and with both the basis sets used) strongly favored over their concerted counterpart. In the case of DMD reaction with isobutane tertiary C-H bond the large favor for the diradicaloid TSs over the concerted TS, predicted in gas phase by the B3LYP/6-31G(d) method, progressively decreases as a result of basis set extension and introduction of solvent effects: the higher theory level [B3LYP/6-311+G(d,p)] suggests that in acetone solution TS conc has almost the same energy as TS rad,perp while TS rad,coll resides only 2 kcal/mol higher.

Molecule-induced alkane homolysis with dioxiranes

The mechanisms of C-H and C-C bond activations with dimethyldioxirane (DMD) were studied experimentally and computationally at the B3LYP/6-311+G**//B3LYP/6-31G* density functional theory level for the propellanes 3,6-dehydrohomoadamantane (2) and 1,3-dehydroadamantane (3). The sigma(C-C) activation of 3 with DMD (Delta G(*) = 23.9 kcal mol(-1) and Delta G(r) = -5.4 kcal mol(-1)) is the first example of a molecule-induced homolytic C-C bond cleavage. The C-H bond hydroxylation observed for 2 is highly exergonic (Delta G(r) = -74.4 kcal mol(-1)) and follows a concerted pathway (Delta G(*) = 34.8 kcal mol(-1)), in contrast to its endergonic molecule-induced homolysis (Delta G(*) = 28.8 kcal mol(-1) and Delta G(r) = +9.2 kcal mol(-1)). The reactivities of 2 and 3 with CrO(2)Cl(2), which follow a molecule-induced homolytic activation mechanism, parallel the DMD results only for highly reactive 3, but differ considerably for more stable propellanes such as 4-phenyl-3,6-dehydrohomoadamantane (1) and 2.

A mechanistic study of reactions of stable disilenes with haloalkanes

Mechanisms of the reactions of three tetrakis(trialkylsilyl)disilenes and a tetraaryldisilene with various haloalkanes such as carbon tetrachloride, chloroform, dichloromethane, which gave the corresponding 1-alkyl-2-chlorodisilanes and/or 1,2-dichlorodisilanes, were investigated in detail. As evidenced by an ESR observation of an intermediate radical, these reactions were quite unusual, forming neutral radical pairs from two closed shell molecules at the first step; no similar reactions have been observed between alkenes and haloalkanes. Low oxidation potentials of these disilenes, large negative activation entropies, and solvent effects for the rates are in good accord with the direct halogen abstraction of disilenes from haloalkanes instead of single-electron transfer at the rate-determining first step. The structure--reactivity relationship of the reactions and the Hammond postulate suggest that the transition state structures for the first step are similar to those for the halogen abstraction by silyl radicals, but more product-like.

Radical and non-radical mechanisms for alkane oxidations by hydrogen peroxide-trifluoroacetic acid

The oxidation of cyclohexane by the H2O2-trifluoroacetic acid system is revisited. Consistent with a previous report (Deno, N.; Messer, L. A. Chem. Comm. 1976, 1051), cyclohexanol forms initially but then esterifies to cyclohexyl trifluoroacetate. Small amounts of trans-1,2-cyclohexadiyl bis-(trifluoroacetate) also form. Although these products form irrespective of the presence or absence of O2, dual mechanisms are shown to operate. In the absence of O2, the dominant mechanism is a radical chain reaction that is propagated by CF3. abstracting H from C6H12 and SH2 displacement of C6H11. on CF3CO2OH. The intermediacy of C6H11. and CF3. is inferred from production of CHF3 and CO2 along with cyclohexyl trifluoroacetate, or CDF3 when cyclohexane-d12 is used. In the presence of O2, fluoroform and CO2 are suppressed, the reaction rate slows, and the rate law approaches second order (first order in peracid and in C6H12). Trapping of cyclohexyl radicals by quinoxaline is inefficient except at elevated (approximately 75 degrees C) temperatures. Fluoroform and CO2, telltale evidence for the chain pathway, were not produced when quinoxaline was present in room temperature reactions. These observations suggest that a parallel, nonfree radical, oxenoid insertion mechanism dominates when O2 is present. A pathway is discussed in which a biradicaloid-zwiterionic transition state is attained by hydrogen transfer from alkane to peroxide oxygen with synchronous O-O bond scission.

Dimethyldioxirane epoxidation of polycyclic fluoranthene hydrocarbons

Direct epoxidation of polycyclic fluoranthenes with dimethyldioxirane provides several new mono- and di-oxide derivatives.