Synthesis of Diaryl Ethers, Diaryl Thioethers, and Diarylamines Mediated by Potassium Fluoride-Alumina and 18-Crown-6: Expansion of Scope and Utility(1)

Recent Advances in the Phytochemistry of Bryophytes: Distribution, Structures and Biological Activity of Bibenzyl and Bisbibenzyl Compounds

Research on bryophyte phytochemistry has revealed the presence of different phytochemicals like fatty acids, terpenoids, small phenolic molecules, etc. Small phenolic molecules, i.e., bibenzyls (of two aromatic rings) and bisbibenzyls (four aromatic rings), are unique signature molecules of liverworts. The first bisbibenzyls marchantin A and riccardin A were discovered in two consecutive years, i.e., 1982 and 1983, respectively, by Asakawa and coworkers. Since then, about 70 bisbibenzyls have been reported. These molecules are characterized and identified using different spectroscopic techniques and surveyed for different bioactivity and structure-activity relations. Biochemistry is determined by the season, geography, and environment. In this review, quantitative and qualitative information on bibenzyls and bisbibenzyl compounds and their distribution in different liverworts across, geographies along withtraditional to advanced extraction methods, and characterization techniques are summarized. Also, a comprehensive account of characteristic spectra of different bisbibenzyl compounds, their subtypes, and their basic skeleton patterns are compared. A comprehensive table is provided here for the first time presenting the quantity of bibenzyls, bisbenzyls, and their derivatives found in bryophytes, mentioning the spectroscopic data and mass profiles of the compounds. The significance of these compounds in different bioactivities like antibiotic, antioxidative, antitumor, antivenomous, anti-influenza, insect antifeedant, cytotoxic, and anticancerous activities are surveyed and critically enumerated.

Syntheses of Aryl Thioethers via Aromatic Substitution of Aryl Halides at 0 to 25 °C

In this study, we developed mild conditions for the synthesis of an aryl thioether via aromatic substitution using aryl halides, which is a process that has rarely been studied. Aromatic substrates such as aryl fluorides activated with a halogen substituent are difficult to use for substitution reactions, but by using 18-crown-6-ether as an additive, these were successfully converted to their corresponding thioether products. Under the conditions we established, in addition to a wide variety of thiols, less-toxic and odorless disulfides could be used directly as nucleophiles at 0 to 25 °C.

Nickel-Catalyzed Decarbonylative Thioetherification of Carboxylic Acids with Thiols

A nickel-catalyzed decarbonylative thioetherification of carboxylic acids with thiols was developed. Under the reaction conditions, benzoic acids, cinnamic acids, and benzyl carboxylic acids coupled with various thiols including both aromatic and aliphatic ones produce the corresponding thioethers in up to 99% yields. Moreover, this reaction was applicable to the modification of bioactive molecules such as 3-methylflavone-8-carboxylic acid, probenecid, and flufenamic acid, and the synthesis of acaricide chlorbenside. These results well demonstrated the potential synthetic value of this new reaction in organic synthesis.

Development of Efficient One-Pot Methods for the Synthesis of Luminescent Dyes and Sol-Gel Hybrid Materials

This paper presents a comparison of the simultaneous preparation of di-O-alkylated and ether-ester derivatives of fluorescein using different methods (conventional or microwave heating). Shortening of the reaction time and increased efficiency were observed when using a microwave reactor. Moreover, described here for the first time is the application of a fast, simple, and eco-friendly ball-assisted method to exclusively obtain ether-ester derivatives. We also demonstrate that fluorescein can be effectively functionalized by O-alkylation carried out under microwave or ball-milling conditions, saving time and energy and affording the desired products with good yields and minimal byproduct formation. All the synthesized products as well as pH-dependent (prototropic) forms trapped in the SiO2 matrix were examined using UV-Vis and fluorescence spectroscopy.

Rhodium-Catalyzed Twofold Unsymmetrical C-H Alkenylation-Annulation/Thiolation Reaction To Access Thiobenzofurans

A Rh(III)-catalyzed twofold unsymmetrical C-H alkenylation-annulation/thiolation reaction has been developed, enabling the straightforward and efficient synthesis of various thiobenzofurans in one step. This robust protocol proceeds with a broad substrate scope and good functional group tolerance under relatively mild reaction conditions.

Bimetallic BaMoO4 nanoparticles for the C–S cross-coupling of thiols with haloarenes

The C–S cross-coupling of alkyl/aryl thiols with haloarenes using BaMoO₄ nanoparticles was accomplished with high yields, and good functional group tolerance and selectivity. Unactivated bromo and 4-acetyl fluoroarenes can afford thioethers in high yields.

Successful Coupling of a Bis-Amidoxime Uranophile with a Hydrophilic Backbone for Selective Uranium Sequestration

The amidoxime group (-RNH₂NOH) has long been used to extract uranium from seawater on account of its high affinity toward uranium. The development of tunable sorbent materials for uranium sequestration remains a research priority as well as a significant challenge. Herein, we report the design, synthesis, and uranium sorption properties of bis-amidoxime-functionalized polymeric materials (BAP 1-3). Bifunctional amidoxime monomers were copolymerized with an acrylamide cross-linker to obtain bis-amidoxime incorporation as high as 2 mmol g^-1 after five synthetic steps. The resulting sorbents were able to uptake nearly 600 mg of uranium per gram of polymer after 37 days of contact with a seawater simulant containing 8 ppm uranium. Moreover, the polymeric materials exhibited low vanadium uptake with a maximum capacity of 128 mg of vanadium per gram of polymer. This computationally predicted and experimentally realized selectivity of uranium over vanadium, nearly 5 to 1 w/w, is one of the highest reported to date and represents an advancement in the rational design of sorbent materials with high uptake capacity and selectivity.

CsF/clinoptilolite: an efficient solid base in SNAr and copper-catalyzed Ullmann reactions

CsF/clinoptilolite was found to be an efficient solid base catalyst for both SNAr and Ullmann ether reactions. A general and efficient one-step procedure was developed for the synthesis of biaryl ethers via direct coupling of electron-deficient aryl halides to phenols using CsF/clinoptilolite. The protocol was also applied to electron-rich aryl halides by addition of a catalytic amount of copper oxide nanoparticles. Both SNAr and Ullmann reactions were rapid and provided good to excellent yields.

tert-Butoxide mediated cascade desulfonylation/arylation/hydrolysis of cyclic sulfonyimines using diaryliodonium salts: synthesis of diaryl ether derivatives bearing a 2-aldehyde group

Cascades of cyclic sulfonyimines mediated by ^tBuOK with diaryliodonium salts has been developed, giving the diaryl ethers in good yields.

Efficient synthesis of unsymmetrical heteroaryl thioethers and chalcogenides by alkali hydroxide-mediated SNAr reactions of heteroaryl halides and dichalcogenides

An efficient S_NAr reaction of heteroaryl halides and diorganyl dichalcogenides is developed for practical synthesis of the useful unsymmetrical heteroaryl thioethers and chalcogenides.

Organic Oxidations Using Geomimicry

Oxidations of phenylacetic acid to benzaldehyde, benzyl alcohol to benzaldehyde, and benzaldehyde to benzoic acid have been observed, in water as the solvent and using only copper(II) chloride as the oxidant. The reactions are performed at 250 °C and 40 bar, conditions that mimic hydrothermal reactions that are geochemically relevant. Speciation calculations show that the oxidizing agent is not freely solvated copper(II) ions, but complexes of copper(II) with chloride and carboxylate anions. Measurements of the reaction stoichiometries and also of substituent effects on reactivity allow plausible mechanisms to be proposed. These oxidation reactions are relevant to green chemistry in that they proceed in high chemical yield in water as the solvent and avoid the use of toxic heavy metal oxidizing reagents.

Chimeric derivatives of functionalized amino acids and α-aminoamides: compounds with anticonvulsant activity in seizure models and inhibitory actions on central, peripheral, and cardiac isoforms of voltage-gated sodium channels

Six novel 3″-substituted (R)-N-(phenoxybenzyl) 2-N-acetamido-3-methoxypropionamides were prepared and then assessed using whole-cell, patch-clamp electrophysiology for their anticonvulsant activities in animal seizure models and for their sodium channel activities. We found compounds with various substituents at the terminal aromatic ring that had excellent anticonvulsant activity. Of these compounds, (R)-N-4'-((3″-chloro)phenoxy)benzyl 2-N-acetamido-3-methoxypropionamide ((R)-5) and (R)-N-4'-((3″-trifluoromethoxy)phenoxy)benzyl 2-N-acetamido-3-methoxypropionamide ((R)-9) exhibited high protective indices (PI=TD50/ED50) comparable with many antiseizure drugs when tested in the maximal electroshock seizure test to mice (intraperitoneally) and rats (intraperitoneally, orally). Most compounds potently transitioned sodium channels to the slow-inactivated state when evaluated in rat embryonic cortical neurons. Treating HEK293 recombinant cells that expressed hNaV1.1, rNaV1.3, hNaV1.5, or hNaV1.7 with (R)-9 recapitulated the high levels of sodium channel slow inactivation.

O-Arylation with nitroarenes: metal-catalyzed and metal-free methodologies

Emergence of nitroarene as an alternative to aryl halides inO-arylation of arylboronic acid or phenols has been highlighted.

Synthesis of quinazolinimines and quinazolinamines from 2-fluorobenzonitriles under catalyst-free conditions

A convenient procedure for the synthesis of quinazolinimines and quinazolinamines from 2-fluorobenzonitriles and 2-aminopyridines or amidines with KO^tBu as the promotor has been developed.

Flavones as isosteres of 4(1H)-quinolones: discovery of ligand efficient and dual stage antimalarial lead compounds

Malaria is responsible for nearly one million deaths annually, and the increasing prevalence of multi-resistant strains of Plasmodium falciparum poses a great challenge to controlling the disease. A diverse set of flavones, isosteric to 4(1H)-quinolones, were prepared and profiled for their antiplasmodial activity against the blood stage of P. falciparum W2 strain, and the liver stage of the rodent parasite Plasmodium berghei. Ligand efficient leads were identified as dual stage antimalarials, suggesting that scaffold optimization may afford potent antiplasmodial compounds.

Iridium-catalyzed asymmetric hydrogenation of dibenzo[b,f][1,4]thiazepines

Highly enantioselective hydrogenation of substituted dibenzo[b,f][1,4]thiazepines was achieved with up to 96 % ee (enantiomeric excess) using [Ir(COD)Cl]2/(R)-SynPhos complex as catalyst in the presence of iodine. This method provides an efficient access to optically active 11-substituted-10,11-dihydrodibenzo[b,f][1,4]thiazepines.

Asymmetric-based novel poly(ether-imide)s: Preparation, properties, kinetics of thermal decomposition, and study electrochemical oxidation behavior by using nanocomposite paste of polymer and multi-walled carbon nanotube

A series of novel fluorescent poly(ether-imide)s (PEIs) bearing ether linkage and diarylimidazole pendant in the backbone was successfully prepared by polycondensation reaction between a new unsymmetrical diamine and commercially available tetracarboxylic acid dianhydrides. The PEIs were characterized by Fourier transform infrared, 1H-NMR, UV-vis spectroscopy, fluorimetry, scanning electron microscopy and elemental analysis. The PEIs with inherent viscosities in the range of 0.47–0.63 dL g−1 showed excellent solubility in various aprotic solvents such as N-methylpyrrolidone, dimethyl sulfoxide, N, N-dimethylacetamide and N,N-dimethylformamide. Thermal properties of new PEIs were evaluated by differential scanning calorimetric and thermogravimetric analysis in N2 and air. These polymers showed glass transition temperatures ( Tg) in the range of 269–333 °C and 10% weight loss temperatures above 400 °C in air atmosphere. The data obtained from TGA experiments of these polymers have been applied in different kinetic equations such as Coats–Redfern, Kissinger and Criado methods, to determine the kinetic parameters ( E, ▵ S, ▵ G, ▵ H) and mechanism of thermal decomposition. Herein a method based on the adsorptive stripping cyclic voltammetry technique to investigate electrochemical oxidation of these polymers by using multi-walled carbon nano tubes modified glass electrode is also reported.

Solvent-free, microwave-assisted N-arylation of indolines by using low palladium catalyst loadings

Indoline-based compounds are abundant in nature, and the indoline skeleton is an often-encountered scaffold in a range of biologically active alkaloids, pharmaceutically active compounds, and functional molecules (e.g., sensitizers for solar cells). The wide range of uses warrants further interest in the structural modification of this class of compounds. A series of substituted N-aryl indolines is prepared by a solvent-free, palladium-catalyzed procedure. The procedure requires only low loadings of catalyst, uses microwave irradiation, and starts from commercially available substrates. The method proceeds in good yields and in short reaction times with aryl bromides, chlorides, and iodides, also on 2-substituted indolines. The combination of solvent-free methods with microwave heating will further increase in importance in the search for more environmentally acceptable synthesis methods.

Translation of microwave methodology to continuous flow for the efficient synthesis of diaryl ethers via a base-mediated S(N)Ar reaction

Whilst microwave heating has been widely demonstrated as a synthetically useful tool for rapid reaction screening, a microwave-absorbing solvent is often required in order to achieve efficient reactant heating. In comparison, microreactors can be readily heated and pressurised in order to “super-heat” the reaction mixture, meaning that microwave-transparent solvents can also be employed. To demonstrate the advantages associated with microreaction technology a series of S_NAr reactions were performed under continuous flow by following previously developed microwave protocols as a starting point for the investigation. By this approach, an automated microreaction platform (Labtrix^® S1) was employed for the continuous flow synthesis of diaryl ethers at 195 °C and 25 bar, affording a reduction in reaction time from tens of minutes to 60 s when compared with a stopped-flow microwave reactor.

Discovery of potent and selective thienopyrimidine inhibitors of Aurora kinases

In an effort to discover Aurora kinase inhibitors, an HTS hit revealed an amide containing pyrrolopyrimidine compound. Replacement of the pyrrolopyrimidine residue with a thienopyrimidine moiety led to a series of potent and selective Aurora inhibitors.

Recyclable heterogeneous copper oxide on alumina catalyzed coupling of phenols and alcohols with aryl halides under ligand-free conditions

An efficient alumina-supported CuO-catalyzed O-arylation of phenols and aliphatic alcohols with various aryl as well as heteroaryl halides under ligand-free conditions are reported. This protocol provides a variety of diaryl ether and bis-diaryl ether motifs by reacting different aryl/aliphatic halides with differently substituted phenols and saturated alcohols in the presence of a catalytic amount of CuO on alumina and KOH as a base at moderate temperature under nitrogen atmosphere. The described methodology is simple, straightforward and efficient to afford the cross-coupled products in high yields under ligand-free conditions. The explored catalyst is inexpensive, air-stable and recyclable up to three cycles.