Ultrafast Electron Transfer Dynamics from Molecular Adsorbates to Semiconductor Nanocrystalline Thin Films

Molecular Triplet Generation Enabled by Adjacent Metal Nanoparticles

High-efficiency generation of spin-triplet states in organic molecules is of great interest in diverse areas such as photocatalysis, photodynamic therapy, and upconversion photonics. Recent studies have introduced colloidal semiconductor nanocrystals as a new class of photosensitizers that can efficiently transfer their photoexcitation energy to molecular triplets. Here, we demonstrate that metallic Ag nanoparticles can also assist in the generation of molecular triplets in polycyclic aromatic hydrocarbons (PAHs), but not through a conventional sensitization mechanism. Instead, the triplet formation is mediated by charge-separated states resulting from hole transfer from photoexcited PAHs (anthracene and pyrene) to Ag nanoparticles, which is established through the rapid formation and subsequent decay of molecular anions revealed in our transient absorption measurements. The dominance of hole transfer over electron transfer, while both are energetically allowed, could be attributed to a Marcus inverted region of charge transfer. Owing to the rapid charge separation and the rapid spin-flip in metals, the triplet formation yields are remarkably high, as confirmed by their engagement in production of singlet oxygen with a quantum efficiency reaching 58.5%. This study not only uncovers the fundamental interaction mechanisms between metallic nanoparticles and organic molecules in both charge and spin degrees of freedom but also greatly expands the scope of triplet "sensitization" using inorganic nanomaterials for a variety of emerging applications.

Charge Transfer from Quantum-Confined 0D, 1D, and 2D Nanocrystals

The properties of colloidal quantum-confined semiconductor nanocrystals (NCs), including zero-dimensional (0D) quantum dots, 1D nanorods, 2D nanoplatelets, and their heterostructures, can be tuned through their size, dimensionality, and material composition. In their photovoltaic and photocatalytic applications, a key step is to generate spatially separated and long-lived electrons and holes by interfacial charge transfer. These charge transfer properties have been extensively studied recently, which is the subject of this Review. The Review starts with a summary of the electronic structure and optical properties of 0D-2D nanocrystals, followed by the advances in wave function engineering, a novel way to control the spatial distribution of electrons and holes, through their size, dimension, and composition. It discusses the dependence of NC charge transfer on various parameters and the development of the Auger-assisted charge transfer model. Recent advances in understanding multiple exciton generation, decay, and dissociation are also discussed, with an emphasis on multiple carrier transfer. Finally, the applications of nanocrystal-based systems for photocatalysis are reviewed, focusing on the photodriven charge separation and recombination processes that dictate the function and performance of these materials. The Review ends with a summary and outlook of key remaining challenges and promising future directions in the field.

Ultrafast Coherent Hole Injection at the Interface between CuSCN and Polymer PM6 Using Femtosecond Mid-Infrared Spectroscopy

Tracking the dynamics of ultrafast hole injection into copper thiocyanate (CuSCN) at the interface can be experimentally challenging. These challenges include restrictions in accessing the ultraviolet spectral range through transient electronic spectroscopy, where the absorption spectrum of CuSCN is located. Time-resolved vibrational spectroscopy solves this problem by tracking marker modes at specific frequencies and allowing direct access to dynamical information at the molecular level at donor-acceptor interfaces in real time. This study uses photoabsorber PM6 (poly[(2,6-(4,8-bis(5-(2-ethylhexyl-3-fluoro)thiophen-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)-benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione))]) as a model system to explore and decipher the hole transfer dynamics of CuSCN using femtosecond (fs) mid-infrared (IR) spectroscopy. The time-resolved results indicate that excited PM6 exhibits a sharp vibrational mode at 1599 cm-1 attributed to the carbonyl group, matching the predicted frequency position obtained from time-dependent density functional theory (DFT) calculations. The fs mid-IR spectroscopy demonstrates a fast formation (<168 fs) and blue spectral shift of the CN stretching vibration from 2118 cm-1 for CuSCN alone to 2180 cm-1 for PM6/CuSCN, confirming the hole transfer from PM6 to CuSCN. The short interfacial distance and high frontier orbital delocalization obtained from the interfacial DFT models support a coherent and ultrafast regime for hole transfer. These results provide direct evidence for hole injection at the interface of CuSCN for the first time using femtosecond mid-IR spectroscopy and serve as a new investigative approach for interfacial chemistry and solar cell communities.

Ultrafast hot-carrier dynamics in ultrathin monocrystalline gold

Applications in photodetection, photochemistry, and active metamaterials and metasurfaces require fundamental understanding of ultrafast nonthermal and thermal electron processes in metallic nanosystems. Significant progress has been recently achieved in synthesis and investigation of low-loss monocrystalline gold, opening up opportunities for its use in ultrathin nanophotonic architectures. Here, we reveal fundamental differences in hot-electron thermalisation dynamics between monocrystalline and polycrystalline ultrathin (down to 10 nm thickness) gold films. Comparison of weak and strong excitation regimes showcases a counterintuitive unique interplay between thermalised and non-thermalised electron dynamics in mesoscopic gold with the important influence of the X-point interband transitions on the intraband electron relaxation. We also experimentally demonstrate the effect of hot-electron transfer into a substrate and the substrate thermal properties on electron-electron and electron-phonon scattering in ultrathin films. The hot-electron injection efficiency from monocrystalline gold into TiO2, approaching 9% is measured, close to the theoretical limit. These experimental and modelling results reveal the important role of crystallinity and interfaces on the microscopic electronic processes important in numerous applications.

Interfacial electron transfer of perylenes: Influence of the anchor binding mode

Interfacial electron transfer (IET) through saturated single-linker and dual-linker groups from a perylene chromophore into nanostructured TiO2 films was studied by ultrafast spectroscopy. Perylene chromophores with one and two propanoic acid linker groups in the peri and ortho positions were investigated. In comparison to previously studied perylenes bound via unsaturated acrylic acid linkers, the chromophores with saturated linkers showed bi-exponential IET dynamics. Two distinct transfer times were observed that indicate the presence of two concurrent binding modes. A comparison between ortho- and peri-substituted sensitizers resulted in slower IET dynamics and weaker electronic coupling for ortho substitution. Finally, IET from sensitizers with saturated linker groups is neither promoted nor hindered by a second linker group. This indicates that only one of the two linkers binds covalently to the surface. This study reveals the importance of the anchor-binding mode and design considerations of the linker for regulating IET.

Morphology, Energy Level Alignment, and Charge Transfer at the Protoporphyrin IX-Semiconductor Interface

The combination of molecular catalysts and semiconductor substrates in hybrid heterogeneous photo- or electrocatalytic devices could yield synergistic effects that result in enhanced activity and long-term stability. The extent of synergy strongly depends on the electronic interactions and energy level alignment between the molecular states and the valence and conduction band of the substrate. These properties of hybrid interfaces are investigated for a model system composed of protoporphyrin IX (PPIX) as a stand-in for molecular catalysts and a variety of semiconductor substrates. Monolayers of PPIX are deposited using Langmuir-Blodgett deposition. Their morphology is studied in dependence of the deposition surface pressure to achieve a high-quality, dense coverage. By making use of ultraviolet-visible spectroscopy and ultraviolet photoelectron spectroscopy, the band alignment is determined by the vacuum level and incorporates an interface dipole of 0.4 eV independent of the substrate. The HOMO, LUMO, and LUMO+1 levels were determined to be at 5.6, 3.7, and 2.7 eV below the vacuum level, respectively. The quenching of PPIX photoluminescence in dependence of the potential gradient between excited state and electron affinity of the semiconductor substrates is overall in good agreement with electron transfer processes occurring at very fast time scales on the order of femtoseconds. Nevertheless, deviations from this model become apparent for narrower band gap semiconductors, which points to an additional relevance of other processes, such as energy transfer. These findings highlight the importance of matching the semiconductor to the molecular catalyst to prevent undesirable deactivation pathways.

Encapsulating Semiconductor Quantum Dots in Supramolecular Cages Enables Ultrafast Guest-Host Electron and Vibrational Energy Transfer

In the field of supramolecular chemistry, host-guest systems have been extensively explored to encapsulate a wide range of substrates, owing to emerging functionalities in nanoconfined space that cannot be achieved in dilute solutions. However, host-guest chemistry is still limited to encapsulation of small guests. Herein, we construct a water-soluble metallo-supramolecular hexagonal prism with a large hydrophobic cavity by anchoring multiple polyethylene glycol chains onto the building blocks. Then, assembled prisms are able to encapsulate quantum dots (QDs) with diameters of less than 5.0 nm. Furthermore, we find that the supramolecular cage around each QD strongly modifies the photophysics of the QD by universally increasing the rates of QD relaxation processes via ultrafast electron and vibrational energy transfer. Taken together, these efforts expand the scope of substrates in host-guest systems and provide a new approach to tune the optical properties of QDs.

Nature of the Ultrafast Interligands Electron Transfers in Dye-Sensitized Solar Cells

Charge-transfer dynamics and interligand electron transfer (ILET) phenomena play a pivotal role in dye-sensitizers, mostly represented by the Ru-based polypyridyl complexes, for TiO2 and ZnO-based solar cells. Starting from metal-to-ligand charge-transfer (MLCT) excited states, charge dynamics and ILET can influence the overall device efficiency. In this letter, we focus on N34- dye ( [Ru(dcbpy)2(NCS)2]4-, dcbpy = 4,4'-dicarboxy-2,2'-bipyridine) to provide a first direct observation with high time resolution (<20 fs) of the ultrafast electron exchange between bpy-like ligands. ILET is observed in water solution after photoexcitation in the ∼400 nm MLCT band, and assessment of its ultrafast time-scale is here given through a real-time electronic dynamics simulation on the basis of state-of-the-art electronic structure methods. Indirect effects of water at finite temperature are also disentangled by investigating the system in a symmetric gas-phase structure. As main result, remarkably, the ILET mechanism appears to be based upon a purely electronic evolution among the dense, experimentally accessible, MLCT excited states manifold at ∼400 nm, which rules out nuclear-electronic couplings and proves further the importance of the dense electronic manifold in improving the efficiency of dye sensitizers in solar cell devices.

Understanding Charge Dynamics in Dense Electronic Manifolds in Complex Environments

Photoinduced charge transfer (CT) excited states and their relaxation mechanisms can be highly interdependent on the environment effects and the consequent changes in the electronic density. Providing a molecular interpretation of the ultrafast (subpicosecond) interplay between initial photoexcited states in such dense electronic manifolds in condensed phase is crucial for improving and understanding such phenomena. Real-time time-dependent density functional theory is here the method of choice to observe the charge density, explicitly propagated in an ultrafast time domain, along with all time-dependent properties that can be easily extracted from it. A designed protocol of analysis for real-time electronic dynamics to be applied to time evolving electronic density related properties to characterize both in time and in space CT dynamics in complex systems is here introduced and validated, proposing easy to be read cross-correlation maps. As case studies to test such tools, we present the photoinduced charge-transfer electronic dynamics of 5-benzyluracil, a mimic of nucleic acid/protein interactions, and the metal-to-ligand charge-transfer electronic dynamics in water solution of [Ru(dcbpy)2(NCS)2]4-, dcbpy = (4,4'-dicarboxy-2,2'-bipyridine), or "N34-", a dye sensitizer for solar cells. Electrostatic and explicit ab initio treatment of solvent molecules have been compared in the latter case, revealing the importance of the accurate modeling of mutual solute-solvent polarization on CT kinetics. We observed that explicit quantum mechanical treatment of solvent slowed down the charge carriers mobilities with respect to the gas-phase. When all water molecules were modeled instead as simpler embedded point charges, the electronic dynamics appeared enhanced, with a reduced hole-electron distance and higher mean velocities due to the close fixed charges and an artificially increased polarization effect. Such analysis tools and the presented case studies can help to unveil the influence of the electronic manifold, as well as of the finite temperature-induced structural distortions and the environment on the ultrafast charge motions.

A quantitative model of charge injection by ruthenium chromophores connecting femtosecond to continuous irradiance conditions

A kinetic framework for the ultrafast photophysics of tris(2,2-bipyridine)ruthenium(II) phosphonated and methyl-phosphonated derivatives is used as a basis for modeling charge injection by ruthenium dyes into a semiconductor substrate. By including the effects of light scattering, dye diffusion, and adsorption kinetics during sample preparation and the optical response of oxidized dyes, quantitative agreement with multiple transient absorption datasets is achieved on timescales spanning femtoseconds to nanoseconds. In particular, quantitative agreement with important spectroscopic handles-the decay of an excited state absorption signal component associated with charge injection in the UV region of the spectrum and the dynamical redshift of a ∼500 nm isosbestic point-validates our kinetic model. Pseudo-first-order rate coefficients for charge injection are estimated in this work, with an order of magnitude ranging from 10¹¹ to 10¹² s^-1. The model makes the minimalist assumption that all excited states of a particular dye have the same charge injection coefficient, an assumption that would benefit from additional theoretical and experimental exploration. We have adapted this kinetic model to predict charge injection under continuous solar irradiation and find that as many as 68 electron transfer events per dye per second take place, significantly more than prior estimates in the literature.

Electron Transfer at Quantum Dot–Metal Oxide Interfaces for Solar Energy Conversion

Electron transfer at a donor–acceptor quantum dot–metal oxide interface is a process fundamentally relevant to solar energy conversion architectures as, e.g., sensitized solar cells and solar fuels schemes. As kinetic competition at these technologically relevant interfaces largely determines device performance, this Review surveys several aspects linking electron transfer dynamics and device efficiency; this correlation is done for systems aiming for efficiencies up to and above the ∼33% efficiency limit set by Shockley and Queisser for single gap devices. Furthermore, we critically comment on common pitfalls associated with the interpretation of kinetic data obtained from current methodologies and experimental approaches, and finally, we highlight works that, to our judgment, have contributed to a better understanding of the fundamentals governing electron transfer at quantum dot–metal oxide interfaces.

Managing Photoinduced Electron Transfer in AgInS2-CdS Heterostructures

Ternary semiconductors such as AgInS2 with their interesting photocatalytic properties can serve as building blocks to design light harvesting assemblies. The intraband transitions created by the metal ions extend the absorption well beyond the bandgap transition. The interfacial electron transfer of AgInS2 with surface bound ethyl viologen under bandgap and sub band gap irradiation as probed by steady state photolysis and transient absorption spectroscopy offers new insights into the participation of conduction band and trapped electrons. Capping AgInS2 with CdS shifts emission maximum to the blue and increases the emission yield as the surface defects are remediated. CdS capping also promotes charge separation as evident from the efficiency of electron transfer to ethyl viologen, which increased from 14% to 29%. The transient absorption measurements which elucidate the kinetic aspects of electron transfer processes in AgInS2 and CdS capped AgInS2 are presented. The improved performance of CdS capped AgInS2 offers new opportunities to employ them as photocatalysts.

A Description of the Faradaic Current in Cyclic Voltammetry of Adsorbed Redox Species on Semiconductor Electrodes

A framework for interpreting the cyclic voltammetric responses from adsorbed redox monolayers on semiconductor electrodes has been developed. Expressions that describe quantitatively how the rates of the forward and back charge-transfer reactions impact the faradaic current density are presented. The primary insight is an explicit connection between the potential drops across the semiconductor space charge, surface, and electrolyte diffuse layers and the potential dependence of the reaction kinetics. Specifically, the evolution of the voltammetric shapes with experimental variables such as scan rate, standard potential of the redox adsorbate, and semiconductor surface energetics can now be interpreted for information on the operative charge-transfer rate constant and reaction energetics. This model is used to understand the complex dependence of the cathodic and anodic wave shapes for the first redox transition of an asymmetric viologen species adsorbed on n-Si(111). This system exhibited a heterogeneous rate constant of 0.24 s^-1 and exhibited features consistent with an overwhelming majority of the applied potential dropping within the semiconductor space charge region. In total, experimentalists now have a visual key on how to interpret the faradaic current in voltammetric data for information on heterogeneous charge-transfer reactions between semiconductor electrodes and molecular adsorbates. The presented approach fills a long-standing knowledge gap in electrochemistry and aids practitioners interested in advancing photoelectrochemical energy conversion/storage strategies.

Direct observation of the solvent organization and nuclear vibrations of [Ru(dcbpy)2(NCS)2]4-, [dcbpy = (4,4'-dicarboxy-2,2'-bipyridine)], via ab initio molecular dynamics

Environmental effects can drastically influence the optical properties and photoreactivity of molecules, particularly in the presence of polar and/or protic solvents. In this work we investigate a negatively charged Ru(II) complex, [Ru(dcbpy)₂(NCS)₂]^4- [dcbpy = (4,4'-dicarboxy-2,2'-bipyridine)], in water solution, since this system belongs to a broader class of transition-metal compounds undergoing upon photo-excitation rapid and complex charge transfer (CT) dynamics, which can be dictated by structural rearrangement and solvent environment. Ab initio molecular dynamics (AIMD) relying on a hybrid quantum/molecular mechanics scheme is used to probe the equilibrium microsolvation around the metal complex in terms of radial distribution functions of the main solvation sites and solvent effects on the overall equilibrium structure. Then, using our AIMD-based generalized normal mode approach, we investigate how the ligand vibrational spectroscopic features are affected by water solvation, also contributing to the interpretation of experimental Infra-Red spectra. Two solvation sites are found for the ligands: the sulfur and the oxygen sites can interact on average with ∼4 and ∼3 water molecules, respectively, where a stronger interaction of the oxygen sites is highlighted. On average an overall dynamic distortion of the C₂ symmetric gas-phase structure was found to be induced by water solvation. Vibrational analysis reproduced experimental values for ligand symmetric and asymmetric stretchings, linking the observed shifts with respect to the gas-phase to a complex solvent distribution around the system. This is the groundwork for future excited-state nuclear and electronic dynamics to monitor non-equilibrium processes of CT excitation in complex environments, such as exciton migration in photovoltaic technologies.

DFT and TD-DFT Investigation of a Charge Transfer Surface Resonance Raman Model of N3 Dye Bound to a Small TiO2 Nanoparticle

Raman spectroscopy is an important method for studying the configuration of Ru bipyridyl dyes on TiO₂. We studied the [Ru(II)(4,4′-COOH-2,2′-bpy)2(NCS)2)] dye (N3) adsorbed on a (TiO₂)5 nanoparticle using Density Functional Theory, DFT, to optimize the geometry of the complex and to simulate normal Raman scattering, NRS, for the isolated N3 and the N3–(TiO₂)5 complex. Two configurations of N3 are found on the surface both anchored with a carboxylate bridging bidentate linkage but one with the two NCS ligands directed away from the surface and one with one NSC tilted away and the other NCS interacting with the surface. Both configurations also had another –COOH group hydrogen bonded to a Ti-O dangling bond. These configurations can be distinguished from each other by Raman bands at 2104 and 2165 cm⁻¹. The former configuration has more intense Normal Raman Scattering, NRS, on TiO₂ surfaces and was studied with Time-Dependent Density Functional Theory, TD-DFT, frequency-dependent Raman simulations. Pre-resonance Raman spectra were simulated for a Metal to Ligand Charge Transfer, MLCT, excited state and for a long-distance CT transition from N3 directly to (TiO₂)5. Enhancement factors for the MLCT and long-distance CT processes are around 1 × 103 and 2 × 102, respectively. A Herzberg–Teller intensity borrowing mechanism is implicated in the latter and provides a possible mechanism for the photo-injection of electrons to titania surfaces.

Capturing photochemical and photophysical transformations in iron complexes with ultrafast X-ray spectroscopy and scattering

Light-driven chemical transformations provide a compelling approach to understanding chemical reactivity with the potential to use this understanding to advance solar energy and catalysis applications. Capturing the non-equilibrium trajectories of electronic excited states with precision, particularly for transition metal complexes, would provide a foundation for advancing both of these objectives. Of particular importance for 3d metal compounds is characterizing the population dynamics of charge-transfer (CT) and metal-centered (MC) electronic excited states and understanding how the inner coordination sphere structural dynamics mediate the interaction between these states. Recent advances in ultrafast X-ray laser science has enabled the electronic excited state dynamics in 3d metal complexes to be followed with unprecedented detail. This review will focus on simultaneous X-ray emission spectroscopy (XES) and X-ray solution scattering (XSS) studies of iron coordination and organometallic complexes. These simultaneous XES-XSS studies have provided detailed insight into the mechanism of light-induced spin crossover in iron coordination compounds, the interaction of CT and MC excited states in iron carbene photosensitizers, and the mechanism of Fe-S bond dissociation in cytochrome c.

Hot Electrons in TiO2-Noble Metal Nano-Heterojunctions: Fundamental Science and Applications in Photocatalysis

Plasmonic photocatalysis enables innovation by harnessing photonic energy across a broad swathe of the solar spectrum to drive chemical reactions. This review provides a comprehensive summary of the latest developments and issues for advanced research in plasmonic hot electron driven photocatalytic technologies focusing on TiO2-noble metal nanoparticle heterojunctions. In-depth discussions on fundamental hot electron phenomena in plasmonic photocatalysis is the focal point of this review. We summarize hot electron dynamics, elaborate on techniques to probe and measure said phenomena, and provide perspective on potential applications-photocatalytic degradation of organic pollutants, CO2 photoreduction, and photoelectrochemical water splitting-that benefit from this technology. A contentious and hitherto unexplained phenomenon is the wavelength dependence of plasmonic photocatalysis. Many published reports on noble metal-metal oxide nanostructures show action spectra where quantum yields closely follow the absorption corresponding to higher energy interband transitions, while an equal number also show quantum efficiencies that follow the optical response corresponding to the localized surface plasmon resonance (LSPR). We have provided a working hypothesis for the first time to reconcile these contradictory results and explain why photocatalytic action in certain plasmonic systems is mediated by interband transitions and in others by hot electrons produced by the decay of particle plasmons.

Photophysical properties of N719 and Z907 dyes, benchmark sensitizers for dye-sensitized solar cells, at room and low temperature

Two benchmark sensitizers used for dye-sensitized solar cells, ruthenium polypyridyl N719 and Z907 dyes were investigated with spectroscopic methods as steady-state absorption, time-gated phosphorescence and femto-/nanosecond time-resolved transient absorption at room temperature and at 160 K. Aim of this study was to perform comprehensive photophysical study of dye excited singlet and triplet metal-to-ligand charge transfer (MLCT) states including states lifetimes, dependency on temperature and dye concentration and obtain detailed information on the excitation decay pathway. Transient absorption and phosphorescence decay data provided a clearer picture of the dynamics of the excited MLCT states. Based on data analysis, the excitation decay pathway consists of rapid intersystem crossing to the triplet MLCT state that undergoes state solvation and vibrational relaxation. It was demonstrated that the lifetime of the fully relaxed triplet MLCT is also strongly dependent on dye concentration for both molecules, providing a viable explanation for a large inconsistency seen in previous studies.

Plasmonic Photocatalysts for Sunlight-Driven Reduction of CO2 : Details, Developments, and Perspectives

Plasmonic photocatalysis is among the most efficient processes for the photoreduction of CO₂ into valuable fuels. The formation of localized surface plasmon resonance (LSPR), energy transfer, and surface reaction are the significant steps in this process. LSPR plays an essential role in the performance of plasmonic photocatalysts as it promotes an excellent, light absorption over a broad wavelength range while simultaneously facilitating an efficient energy transfer to semiconductors. The LSPR transfers energy to a semiconductor through various mechanisms, which have both advantages and disadvantages. This work points out four critical features for plasmonic photocatalyst design, that is, plasmonic materials, size, shape of plasmonic nanoparticles (PNPs), and the contact between PNPs and semiconductor. Various developed plasmonic photocatalysts, as well as their photocatalytic performance in CO₂ photoreduction, are reviewed and discussed. Finally, perspectives of advanced architectures and structural engineering for plasmonic photocatalyst design are put forward with high expectations to achieve an efficient CO₂ photoreduction shortly.

Size-dependent electron transfer from atomically defined nanographenes to metal oxide nanoparticles

Atomically defined nanographenes (NGs) feature size-dependent energy gaps induced by, and tuneable through, quantum confinement. Their energy-tunability and robustness make NGs appealing candidates as active elements in sensitized geometries, where NGs functionalize a metal oxide (MO) film with large-area-to-volume ratio. Despite the prominent relevance of NG/MO interfaces for developing novel architectures for solar energy conversion, to date, little information is available regarding the fundamentals of electron transfer (ET) processes taking place from NG donors to MO acceptors. Here, we analyze the interplay between the size of atomically precise NGs and ET dynamics at NG/MO interfaces. We observe that as the size of NG decreases, ET from the NG donating state to the MO acceptor state speeds up. This dependence can be rationalized from variations in the donor-to-acceptor interfacial overpotential as the NG size (HOMO-LUMO gap) is reduced (increased), and can be rationalized within the framework of Marcus ET theory.

Excited-State Properties of Metal-Free ((Z)-2-Cyano-3-(4-((E)-2-(6-(4-methoxyphenyl)-9-octyl-9H-carbazol-3-yl)vinyl)phenyl)acrylic Acid and (E)-2-Cyano-3-(4-((E)-4-(diphenylamino)styryl)phenyl)acrylic Acid) and Ru-Based (N719 and Z907) Dyes and Photoinduced Charge Transfer Processes in FTO/TiCl4/TiO2/Dye Photoanodes Fabricated by Conventional Staining and Potential-Assisted Adsorption

Excited-state properties of two novel metal-free custom-made dyes D2d [(Z)-2-cyano-3-(4-((E)-2-(6-(4-methoxyphenyl)-9-octyl-9H-carbazol-3-yl)vinyl)phenyl)acrylic acid] and T-SB-C [(E)-2-cyano-3-(4-((E)-4-(diphenylamino)styryl)phenyl)acrylic acid] and two commercially available Ruthenium-based N719 and Z907 dyes were investigated with application of time-resolved absorption and emission. Singlet excited state lifetimes of D2d and T-SB-C were determined in acetonitrile and are 1.4 and 2.45 ns, respectively. The ³MLCT state lifetimes of N719 and Z907 dyes determined in methanol are 9.25 and 8.85 ns, respectively. Subsequently, photoexcited processes like electron injection and charge recombination were studied for those dyes adsorbed on the FTO/TiCl₄/TiO₂ photoanodes and fabricated via a conventional staining technique and innovative potential-assisted fast dye staining method. The dynamics of the spectro-temporal data was determined with application of single-wavelength and global fitting. All dye-TiO₂ systems showed fast picosecond injection of excited electrons to the conduction band of the TiO₂ layer and in complex multiphasic charge recombination processes. The dynamics of those processes is not altered by the dye adsorption method.

Vibronic coherence evolution in multidimensional ultrafast photochemical processes

The complex choreography of electronic, vibrational, and vibronic couplings used by photoexcited molecules to transfer energy efficiently is remarkable, but an unambiguous description of the temporally evolving vibronic states governing these processes has proven experimentally elusive. We use multidimensional electronic-vibrational spectroscopy to identify specific time-dependent excited state vibronic couplings involving multiple electronic states, high-frequency vibrations, and low-frequency vibrations which participate in ultrafast intersystem crossing and subsequent relaxation of a photoexcited transition metal complex. We discover an excited state vibronic mechanism driving long-lived charge separation consisting of an initial electronically-localized vibrational wavepacket which triggers delocalization onto two charge transfer states after propagating for ~600 femtoseconds. Electronic delocalization consequently occurs through nonadiabatic internal conversion driven by a 50 cm^-1 coupling resulting in vibronic coherence transfer lasting for ~1 picosecond. This study showcases the power of multidimensional electronic-vibrational spectroscopy to elucidate complex, non-equilibrium energy and charge transfer mechanisms involving multiple molecular coordinates.

Electron Localization and Transport in SnO2/TiO2 Mesoporous Thin Films: Evidence for a SnO2/SnxTi1-xO2/TiO2 Structure

A study of SnO₂/TiO₂ core/shell films was undertaken to investigate the influences of shell thickness and post deposition sintering on electron localization and transport properties. Electrochemical reduction of the materials resulted in the appearance of a broad visible-near IR absorbance that provided insights into the electronic state(s) within the core/shell structures. As the shell thickness was increased from 0.5 to 5 nm, evidence for the presence of a Sn_xTi_1-xO₂ interfacial state emerged that was physically located between the core and the shell. The lifetime of photoinjected electrons increased with the shell thickness. Electron transport occurred through the SnO₂ core; however, when materials with shell thicknesses ≥2 nm were annealed at 450 °C, a new electron transport pathway through the shell was evident. The data indicate that these materials are best described as SnO₂/Sn_xTi_1-xO₂/TiO₂ where electrons preferentially localize in a Sn_xTi_1-xO₂ interfacial state and transport through SnO₂ and annealed TiO₂ (if present). The implications of these results for applications in solar energy conversion are discussed.

Both Free and Trapped Carriers Contribute to Photocurrent of Sb2Se3 Solar Cells

Polycrystalline semiconductor films, such as methylammonium lead iodide, cadmium telluride, copper-indium-gallium selenide, etc., are being intensively studied because of their great potential for highly efficient and cost-effective solar cells. Among them, polycrystalline antimony chalcogenide films are also promising for photovoltaic applications because they are nontoxic, stable, and flexible and have a suitable band gap. Considerable effort has already been devoted to improving the power conversion efficiency of antimony chalcogenide solar cells, but their efficiency still lingers below 10% due in part to scarce fundamental optoelectronic studies that help guide their development. Here, we use a combination of time-resolved terahertz and transient absorption spectroscopies to interrogate the optoelectronic behavior of antimony selenide thin films. By combining these two techniques we are able to monitor both free and trapped carrier dynamics and then evaluate their respective diffusion lengths. Our results indicate that trapped carriers remain mobile and can reach charge-collecting interfaces prior to recombination, and therefore, both free and trapped carriers can contribute to the photocurrent of antimony selenide solar cells.

Metal-Complex/Semiconductor Hybrid Photocatalysts and Photoelectrodes for CO2 Reduction Driven by Visible Light

CO₂ reduction to carbon feedstocks using heterogeneous photocatalysts is an attractive means of addressing both climate change and the depletion of fossil fuels. Of particular importance is the development of a photosystem capable of functioning in response to visible light, which accounts for the majority of the solar spectrum, representing a kind of artificial photosynthesis. Hybrid systems comprising a metal complex and a semiconductor are promising because of the excellent electrochemical (and/or photocatalytic) activity of metal complexes during CO₂ reduction and the ability of semiconductors to efficiently oxidize water to molecular O₂ . Here, the development of hybrid photocatalysts and photoelectrodes for CO₂ reduction in combination with water oxidation is described.

Chemisorption of Atomically Precise 42-Carbon Graphene Quantum Dots on Metal Oxide Films Greatly Accelerates Interfacial Electron Transfer

Graphene quantum dots (GQDs) are emerging as environmentally friendly, low-cost, and highly tunable building blocks in solar energy conversion architectures, such as solar (fuel) cells. Specifically, GQDs constitute a promising alternative for organometallic dyes in sensitized oxide systems. Current sensitized solar cells employing atomically precise GQDs are based on physisorbed sensitizers, with typically limited efficiencies. Chemisorption has been pointed out as a solution to boost photoconversion efficiencies, by allowing improved control over sensitizer surface coverage and sensitizer-oxide coupling strength. Here, employing time-resolved THz spectroscopy, we demonstrate that chemisorption of atomically precise C42-GQDs (hexa- peri-hexabenzocoronene derivatives consisting of 42 sp² carbon atoms) onto mesoporous metal oxides, enabled by their functionalization with a carboxylate group, enhances electron transfer (ET) rates by almost 2 orders of magnitude when compared with physisorbed sensitizers. Density functional theory (DFT) calculations, absorption spectroscopy and valence band X-ray photoelectron spectroscopy reveal that the enhanced ET rates can be traced to stronger donor-acceptor coupling strength enabled by chemisorption.

Tailored Interface Energetics for Efficient Charge Separation in Metal Oxide-Polymer Solar Cells

Hybrid organic-inorganic heterointerfaces in solar cells suffer from inefficient charge separation yet the origin of performance limitations are widely unknown. In this work, we focus on the role of metal oxide-polymer interface energetics in a charge generation process. For this purpose, we present novel benzothiadiazole based thiophene oligomers that tailor the surface energetics of the inorganic acceptor TiO₂ systematically. In a simple bilayer structure with the donor polymer poly(3-hexylthiophene) (P3HT), we are able to improve the charge generation process considerably. By means of an electronic characterization of solar cell devices in combination with ultrafast broadband transient absorption spectroscopy, we demonstrate that this remarkable improvement in performance originates from reduced recombination of localized charge transfer states. In this context, fundamental design rules for interlayers are revealed, which assist the charge separation at organic-inorganic interfaces. Beside acting as a physical spacer in between electrons and holes, interlayers should offer (1) a large energy offset to drive exciton dissociation, (2) a push-pull building block to reduce the Coulomb binding energy of charge transfer states and (3) an energy cascade to limit carrier back diffusion towards the interface.

Ultrafast measurements of the dynamics of single nanostructures: a review

The ability to study single particles has revolutionized nanoscience. The advantage of single particle spectroscopy measurements compared to conventional ensemble studies is that they remove averaging effects from the different sizes and shapes that are present in the samples. In time-resolved experiments this is important for unraveling homogeneous and inhomogeneous broadening effects in lifetime measurements. In this report, recent progress in the development of ultrafast time-resolved spectroscopic techniques for interrogating single nanostructures will be discussed. The techniques include far-field experiments that utilize high numerical aperture (NA) microscope objectives, near-field scanning optical microscopy (NSOM) measurements, ultrafast electron microscopy (UEM), and time-resolved x-ray diffraction experiments. Examples will be given of the application of these techniques to studying energy relaxation processes in nanoparticles, and the motion of plasmons, excitons and/or charge carriers in different types of nanostructures.

Complete photodissociation dynamics of CF2I2in solution

Photoexcited CF₂I₂in c-C₆H₁₂undergoes various secondary reactions including complex and isomer formation, after ultrafast two- or three-body dissociations.

Mapping Vibronic Couplings in a Solar Cell Dye with Polarization-Selective Two-Dimensional Electronic-Vibrational Spectroscopy

This study uses polarization-selective two-dimensional electronic-vibrational (2D EV) spectroscopy to map intramolecular charge transfer in the well-known solar cell dye, [Ru(dcbpy)₂(NCS)₂]^4- (N3^4-), dissolved in water. A static snapshot of the vibronic couplings present in aqueous N3^4- is reported. At least three different initially excited singlet metal-to-ligand charge-transfer (MLCT) states are observed to be coupled to vibrational modes probed in the lowest energy triplet MLCT state, emphasizing the role of vibronic coupling in intersystem crossing. Angles between electronic and vibrational transition dipole moments are extracted from spectrally isolated 2D EV peaks and compared with calculations to develop a microscopic description for how vibrations participate with ¹MLCT states in charge transfer and intersystem crossing. These results suggest that ¹MLCT states with significant electron density in the electron-donating plane formed by the Ru-(NCS)₂ will participate strongly in charge transfer through these vibronically coupled degrees of freedom.

Fundamental Properties in Colloidal Quantum Dots

A multidisciplinary approach for the production and characterization of colloidal quantum dots, which show great promise for implementation in modern optoelectronic applications, is described. The approach includes the design and formation of unique core/shell structures with alloy-composed layers between the core and the shell. Such structures eliminate interfacial defects and suppress the Auger process, thus reducing the known fluorescence blinking and endowing the quantum dots with robust chemical and spectral stability. The unique design enables the generation and sustained existence of single and multiple excitons with a defined spin-polarized emission recombination. The studies described herein implement the use of single-dot magneto-optical measurements and optically detected magnetic resonance spectroscopy, for direct identification of interfacial defects and for resolving exciton fine structure. The results are of paramount importance for a fundamental understanding of optical transitions in colloidal quantum dots, with an impact on appropriate materials design for practical applications.

Efficient Hot Electron Transfer in Quantum Dot-Sensitized Mesoporous Oxides at Room Temperature

Hot carrier cooling processes represent one of the major efficiency losses in solar energy conversion. Losses associated with cooling can in principle be circumvented if hot carrier extraction toward selective contacts is faster than hot carrier cooling in the absorber (in so-called hot carrier solar cells). Previous work has demonstrated the possibility of hot electron extraction in quantum dot (QD)-sensitized systems, in particular, at low temperatures. Here we demonstrate a room-temperature hot electron transfer (HET) with up to unity quantum efficiency in strongly coupled PbS quantum dot-sensitized mesoporous SnO₂. We show that the HET efficiency is determined by a kinetic competition between HET rate ( K_HET) and the thermalization rate ( K_TH) in the dots. K_HET can be modulated by changing the excitation photon energy; K_TH can be modified through the lattice temperature. DFT calculations demonstrate that the HET rate and efficiency are primarily determined by the density of the state (DoS) of QD and oxide. Our results provide not only a new way to achieve efficient hot electron transfer at room temperature but also new insights on the mechanism of HET and the means to control it.

Comparison of electron injection and recombination on TiO2 nanoparticles and ZnO nanorods photosensitized by phthalocyanine

Titanium dioxide (TiO₂) and zinc oxide (ZnO) semiconductors have similar band gap positions but TiO₂ performs better as an anode material in dye-sensitized solar cell applications. We compared two electrodes made of TiO₂ nanoparticles and ZnO nanorods sensitized by an aggregation-protected phthalocyanine derivative using ultrafast transient absorption spectroscopy. In agreement with previous studies, the primary electron injection is two times faster on TiO₂, but contrary to the previous results the charge recombination is slower on ZnO. The latter could be due to morphology differences and the ability of the injected electrons to travel much further from the sensitizer cation in ZnO nanorods.

Effect of Co-Adsorbate and Hole Transporting Layer on the Photoinduced Charge Separation at the TiO2-Phthalocyanine Interface

Understanding the primary processes of charge separation (CS) in solid-state dye-sensitized solar cells (DSSCs) and, in particular, analysis of the efficiency losses during these primary photoreactions is essential for designing new and efficient photosensitizers. Phthalocyanines (Pcs) are potentially interesting sensitizers having absorption in the red side of the optical spectrum and known to be efficient electron donors. However, the efficiencies of Pc-sensitized DSSCs are lower than that of the best DSSCs, which is commonly attributed to the aggregation tendency of Pcs. In this study, we employ ultrafast spectroscopy to discover why and how much does the aggregation affect the efficiency. The samples were prepared on a standard fluorine-doped tin oxide (FTO) substrates covered by a porous layer of TiO₂ nanoparticles, functionalized by a Pc sensitizer and filled by a hole transporting material (Spiro-MeOTAD). The study demonstrates that the aggregation can be suppressed gradually by using co-adsorbates, such as chenodeoxycholic acid (CDCA) and oleic acid, but rather high concentrations of co-adsorbate is required. Gradually, a few times improvement of quantum efficiency was observed at sensitizer/co-adsorbate ratio Pc/CDCA = 1:10 and higher. The time-resolved spectroscopy studies were complemented by standard photocurrent measurements of the same sample structures, which also confirmed gradual increase in photon-to-current conversion efficiency on mixing Pc with CDCA.

Vibrational Spectroscopy on Photoexcited Dye-Sensitized Films via Pump-Degenerate Four-Wave Mixing

Molecular sensitization of semiconductor films is an important technology for energy and environmental applications including solar energy conversion, photocatalytic hydrogen production, and water purification. Dye-sensitized films are also scientifically complex and interesting systems with a long history of research. In most applications, photoinduced heterogeneous electron transfer (HET) at the molecule/semiconductor interface is of critical importance, and while great progress has been made in understanding HET, many open questions remain. Of particular interest is the role of combined electronic and vibrational effects and coherence of the dye during HET. The ultrafast nature of the process, the rapid intramolecular vibrational energy redistribution, and vibrational cooling present complications in the study of vibronic coupling in HET. We present the application of a time domain vibrational spectroscopy-pump-degenerate four-wave mixing (pump-DFWM)-to dye-sensitized solid-state semiconductor films. Pump-DFWM can measure Raman-active vibrational modes that are triggered by excitation of the sample with an actinic pump pulse. Modifications to the instrument for solid-state samples and its application to an anatase TiO₂ film sensitized by a Zn-porphyrin dye are discussed. We show an effective combination of experimental techniques to overcome typical challenges in measuring solid-state samples with laser spectroscopy and observe molecular vibrations following HET in a picosecond time window. The cation spectrum of the dye shows modes that can be assigned to the linker group and a mode that is localized on the Zn-phorphyrin chromophore and that is connected to photoexcitation.