A Biomimetic Membrane Consisting of a Polyethyleneoxythiol Monolayer Anchored to Mercury with a Phospholipid Bilayer on Top

Fast formation of low-defect-density tethered bilayers by fusion of multilamellar vesicles

A facile and reproducible preparation of surface-supported lipid bilayers is essential for fundamental membrane research and biotechnological applications. We demonstrate that multilamellar vesicles fuse to molecular-anchor-grafted surfaces yielding low-defect-density, tethered bilayer membranes. Continuous bilayers are formed within 10min, while the electrically insulating bilayers with <0.1μm^-2 defect density can be accomplished within 60min. Surface plasmon resonance spectroscopy indicates that an amount of lipid material transferred from vesicles to a surface is inversely proportional to the density of an anchor, while the total amount of lipid that includes tethered and transferred lipid remains constant within 5% standard error. This attests for the formation of intact bilayers independent of the tethering agent density. Neutron reflectometry (NR) revealed the atomic level structural details of the tethered bilayer showing, among other things, that the total thickness of the hydrophobic slab of the construct was 3.2nm and that the molar fraction of cholesterol in lipid content is essentially the same as the molar fraction of cholesterol in the multilamellar liposomes. NR also indicated the formation of an overlayer with an effective thickness of 1.9nm. These overlayers may be easily removed by a single rinse of the tethered construct with 30% ethanol solution. Fast assembly and low residual defect density achievable within an hour of fusion makes our tethered bilayer methodology an attractive platform for biosensing of membrane damaging agents, such as pore forming toxins.

Potential Controls the Interaction of Liposomes with Octadecanol-Modified Au Electrodes: An in Situ AFM Study

The formation of supported lipid bilayers using liposomes requires interaction with the solid surface, rupture of the liposome, and spreading to cover the surface with a lipid bilayer. This can result in a less-than-uniform coating of the solid surface. Presented is a method that uses the electrochemical poration of an adsorbed lipid-like layer on a Au electrode to control the interaction of 100 nm DOPC liposomes. An octadecanol-coated Au-on-mica surface was imaged using tapping-mode AFM during the application of potential in the presence or absence of liposomes. When the substrate potential was made negative enough, defects formed in the adsorbed layer and new taller features were observed. More features were observed and existing features increased in size with time spent at this negative poration potential. The new features were 1.8-2.0 nm higher than the octadecanol-coated gold surface, half the thickness of a DOPC bilayer. These features were not observed in the absence of liposomes when undergoing the same potential perturbation. In the presence of liposomes, the application of a poration potential was needed to initiate the formation of these taller features. Once the applied potential was removed, the features stopped growing and no new regions were observed. The size of these new regions was consistent with the footprint of a flattened 100 nm liposome. It is speculated that the DOPC liposomes were able to interact with the defects and became soluble in the octadecanol, creating a taller region that was limited in size to the liposome that adsorbed and became incorporated. This AFM study confirms previous in situ fluorescence measurements of the same system and illustrates the use of a potential perturbation to control the formation of these regions of increased DOPC content.

Effect of a strong interfacial electric field on the orientation of the dipole moment of thiolated aib-oligopeptides tethered to mercury on either the N- or C-terminus

Four oligopeptides consisting of a sequence of alpha-aminoisobutyric acid (Aib) residues, thiolated at either the N- or C-terminus by means of a -(CH(2))(2)-SH anchor, were self-assembled on mercury, which is a substrate known to impart a high fluidity to self-assembled monolayers (SAMs). The surface dipole potential of these peptide SAMs was estimated in 0.1 M KCl aqueous solution at a negatively charged electrode, where the interfacial electric field is directed toward the metal. To the best of our knowledge, this is the first estimate of the surface dipole potential of peptide SAMs in aqueous solution. The procedure adopted consisted in measuring the charge involved in the gradual expansion of a peptide-coated mercury drop and then combining the resulting information with an estimate of the charge density experienced by diffuse layer ions. The dipole moment of the tethered thiolated peptides was found to be directed toward the metal, independent of whether they were thiolated at the C- or N-terminus. This result was confirmed by the effect of these SAMs on the kinetics and thermodynamics of the Eu(III)/Eu(II) redox couple. The combined outcome of these studies indicates that a strong interfacial electric field orients the dipole moment of peptide SAMs tethered to mercury, even against their "natural" dipole moment.

In situ PM-IRRAS studies of an archaea analogue thiolipid assembled on a au(111) electrode surface

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) has been applied to determine the conformation, orientation, and hydration of a monolayer of 2,3-di-O-phytanyl-sn-glycerol-1-tetraethylene glycol-dl-alpha-lipoic acid ester (DPTL) self-assembled at a gold electrode surface. This Archaea analogue thiolipid has been recently employed to build tethered lipid bilayers. By synthesizing DPT(d16)L, a DPTL molecule with a deuterium substituted tetraethylene glycol spacer, it was possible to differentiate the C-H stretch vibrations of the phytanyl chains from the tetraethylene glycol spacer and acquire the characteristic IR spectra for the chains, spacer, and lipoic acid headgroup separately. Our results show that the structure of the monolayer displays remarkable stability in a broad range of electrode potentials and that the phytanyl chains remain in a liquid crystalline state. The tetraethylene glycol chains are coiled, and the IR spectrum for this region shows that it is in the disordered state. The most significant result of this study is the information that in contrast to expectations the spacer region is poorly hydrated. Our results have implications for the design of a tethered lipid membrane based on this thiolipid.

A new method to evaluate the surface dipole potential of thiol and disulfide self-assembled monolayers and its application to a disulfidated tetraoxyethylene glycol

A procedure to evaluate the surface dipole potential chi of thiol and disulfide self-assembled monolayers (SAMs) is described. The procedure consists of self-assembling the monolayers on a hanging mercury drop electrode and of measuring the charge involved in a progressive expansion of the mercury drop. This measurement is then combined with an estimate of the charge density q experienced by diffuse layer ions, obtained by measuring the diffuse layer capacitance of the SAM at different electrolyte concentrations by electrochemical impedance spectroscopy. These chi measurements, combined with chronocoulometric measurements of the total charge density sigma(M) against potential, indicate that SAMs of tetraoxyethylene glycol-D,L-alpha-lipoic acid ester (TEGL), 2,3-di-O-phytanyl-sn-glycerol-1-tetraoxyethylene glycol-D,L-alpha-lipoic ester (DPTL), and trioxyethyleneoxythiol (EO3) on mercury may undergo a reversal in the surface dipole potential of their polyoxyethylene chain with a change in the interfacial electric field. Moreover, TEGL and EO3 form stable SAMs without electron transfer to the metal, while no such conclusion can be drawn for DPTL.

New method to measure packing densities of self-assembled thiolipid monolayers

For a monolayer of 2,3-di-phytanyl-sn-glycerol-1-tetraethylene glycol-D,L-a-lipoic acid ester lipid (DPTL) self-assembled (SAM) at a gold electrode surface we propose a new method to determine the charge number per adsorbed molecule and the packing density (area per molecule) in the monolayer. The method relies on chronocoulometry to measure the charge density at the SAM covered gold electrode surface. Two series of measurements have to be performed. In the first series, charge densities are measured for a monolayer transferred from the air-solution to the metal-solution interface using the Langmuir-Blodgett (LB) technique. This series of measurements allows one to determine charge numbers per adsorbed DPTL molecule. The second series is performed using a gold electrode covered with a self-assembled monolayer. The charge densities obtained in this series are then used to calculate the packing density with the help of charge numbers per adsorbed DPTL determined in the first series. The area per adsorbed molecule determined by the new method was compared to the area per molecule determined by the popular reductive desorption method. The molecular area determined with the new method is about 20% larger than the area calculated from the van der Waals model, which is a physically reasonable result. In contrast, the popular reductive desorption method gives an area per molecule 20% lower than the minimum estimated based on a van der Waals model. This is a physically unreasonable result. It is also shown that the charge numbers per adsorbed molecule depend on the electrode potential and may assume values smaller than the number of electrons participating in the reductive desorption step. An explanation of the origin of the "partial charge numbers" is provided. We recommend the new method be used in future studies of thiol adsorption at metal surfaces.

Tethered bilayer lipid membranes based on monolayers of thiolipids mixed with a complementary dilution molecule. 1. Incorporation of channel peptides

Tethered bilayer lipid membranes (tBLMs) are described based on the self-assembly of a monolayer on template stripped gold of an archea analogue thiolipid, 2,3-di-o-phytanyl-sn-glycerol-1-tetraethylene glycol-d,l-alpha-lipoic acid ester lipid (DPTL), and a newly designed dilution molecule, tetraethylene glycol-d,l-alpha-lipoic acid ester (TEGL). The tBLM is completed by fusion of liposomes made from a mixture of diphytanoylphosphatidyl choline (DPhyPC), cholesterol, and 1,2-diphytanoyl-sn-glycero-3-phosphate (DPhyPG) in a molar ratio of 6:3:1. Melittin and gramicidin are incorporated into these tBLMs as shown by surface plasmon resonance (SPR) and electrochemical impedance spectroscopy (EIS) studies. Ionic conductivity at 0 V vs Ag|AgCl, 3 M KCl, measured by EIS measurements are comparable to the results obtained by other research groups. Admittance plots as a function of potential are discussed on a qualitative basis in terms of the kinetics of ion transport through the channels.

Potassium Ion Transport by Valinomycin across a Hg-Supported Lipid Bilayer

A biomimetic membrane consisting of a lipid bilayer tethered to a mercury electrode via a hydrophilic spacer was investigated in aqueous KCl by potential-step chronocoulometry and electrochemical impedance spectroscopy, both in the absence and in the presence of the ionophore valinomycin. Impedance spectra, recorded from 1 x 10(-2) to 1 x 10(5) Hz over a potential range of 0.8 V, are satisfactorily fitted to a series of four RC meshes, which are straightforwardly related to the different substructural elements of the biomimetic membrane. The frequency-independent resistances and conductances of both the lipid bilayer and the hydrophilic spacer show a maximum when plotted against the applied potential. This behavior is interpreted on the basis of a general approximate approach that applies the concepts of impedance spectroscopy to a model of the electrified interphase and to the kinetics of potassium ion transport assisted by valinomycin across the lipid bilayer.

Self-assembled biomimetic monolayers using phospholipid-containing disulfides

Several phospholipid-based disulfide molecules were synthesized and attached onto the gold-coated silicon wafer using the self-assembling method. The syntheses of these surface-modifying agents were conducted by introducing bromoethylphosphorate (PBr), phosphorylcholine (PC) or phosphorylethanolamine (PE) groups on the terminals of a dialkyl disulfide. After disulfides adsorption onto gold substrate surfaces, the composition, the film thickness, and the conformational order of self-assembled monolayer surfaces were explored and discussed in detail based on reflection-absorption infrared spectroscopy, contact angle measurement, Auger electron spectroscopy, X-ray photoelectron spectroscopy, and so on. The monolayer having the PBr end group could also be converted to a PC surface by treating with trimethylamine. The model functional surfaces of Au-SC11-PC, -PE, -PBr, -OH or corresponding mixed layers were used to mimic biomembrane surfaces. The monolayer having PC groups was found to reduce fibrinogen adsorption as evaluated from protein adsorption experiments using quartz crystal microbalance. It also showed relatively low platelet adherence compare to the glass, PBr and PE surfaces. The cell viability test also revealed that the PC surface displayed lower cytotoxicity than other surfaces.

Direct electrochemical interaction between a modified gold electrode and a bacterial membrane extract

A novel electrochemical approach is described for redox-active membrane proteins. A total membrane extract (in the form of vesicles) of Bacillus subtilis is tethered onto gold surfaces modified with cholesterol based thiols. The membrane vesicles remain intact on the surface and do not rupture or fuse to form a planar bilayer. Oxidation/reduction signals are obtained of the natural co-enzyme, menaquinone-7, located in the membrane. The membrane protein, succinate menaquinone oxidoreductase (SQR), remains in the vesicles and is able to reduce fumarate using menaquinone as mediator. The catalysis of the reverse reaction (oxidation of succinate), which is the natural catalytic function of SQR, is almost absent with menaquinone. However, adding the co-enzyme ubiquinone, which has a reduction potential that is about 0.2 V higher, restores the succinate oxidation activity.

Electrochemical and PM-IRRAS studies of the effect of the static electric field on the structure of the DMPC bilayer supported at a Au(111) electrode surface

Differential capacity, charge density measurements, and polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) were employed to study the fusion of small unilamellar vesicles of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) on a Au(111) electrode surface. The differential capacity and charge density data showed that the vesicles fuse onto the gold surface at charge densities between -10 microC/cm(2) < sigma(M) < 10 microC/cm(2) to form a bilayer. When sigma(M) < -10 microC/cm(2), the film is detached from the surface but it remains in close proximity to the surface. PM-IRRAS experiments provided IR spectra for the bilayer in the adsorbed and the desorbed state. Ab initio normal coordinate calculations were performed to assist interpretation of the IR spectra. The IR bands were analyzed quantitatively, and this analysis provided information concerning the conformation and orientation of the acyl chains and the polar head region of the DMPC molecule. The orientation of the chains, hydration, and conformation of the headgroup of the DMPC molecule strongly depend on the electrode potential.

Tethered bilayer lipid membranes self-assembled on mercury electrodes

In order to incorporate integral proteins in a functionally active state, metal-supported lipid bilayers must have a hydrophilic region interposed between the bilayer and the metal. This region is realized with a hydrophilic molecule terminating at one end with a sulfhydryl or disulfide group that anchors this "hydrophilic spacer" to the surface of a metal, such as gold or mercury. The other end of the hydrophilic spacer may be covalently linked to the polar head of a phospholipid molecule, giving rise to a supramolecule called "thiolipid" (TL). With respect to gold, mercury has the advantage of providing a defect-free and fluid surface to the self-assembling spacer. Hydrophilic spacers consisting of a polyethyleneoxy or a hexapeptide chain, as well as thiolipids derived from these spacers, were employed to fabricate mercury-supported lipid bilayers. The formation of a lipid bilayer on top of a self-assembled monolayer of a hydrophilic spacer, or of a single-lipid monolayer on top of a self-assembled monolayer of a thiolipid, was realized by simply immersing the coated mercury electrode into an aqueous solution across a lipid film previously spread on its surface at its spreading pressure. Particularly stable mercury-supported lipid bilayers were obtained by using thiolipids. The biomimetic properties of these lipid bilayers were tested by incorporating channel-forming polypeptides (gramicidin and melittin) and proteins (OmpF porin). The effect of the transmembrane potential on the function of these channels was estimated by using a simple electrostatic model of the mercury-solution interphase.

Incorporation of Na(+),K(+)-ATP-ase into the thiolipid biomimetic assemblies via the fusion of proteoliposomes

The black lipid membranes (BLMs) are artificial membrane systems that have been widely used in the study of different biological processes. In this paper the planar bilayer lipid membranes have been used to study the behavior of thiolipid molecules-dipalmitoyl-phosphatidyl-ethanolamine-mercaptopropionamide (DPPE-MPA) and cholesteryl 3-mercaptopropionate (Chs-MPA)-as compared to classical BLM made of natural lipids. We present our experiments on black thiolipid bilayer (BTM) formation from a thiolipid solution and basic results of pump currents generated by sodium-potassium pump-Na(+),K(+)-ATP-ase-introduced to such bilayer systems via proteoliposome adsorption with subsequent fusion. Our results imply that no substantial difference exists between BLMs formed from classical lipids and those made from thiolipids used in this study. The same thiolipid molecules were subsequently used for the formation of covalently bound, tethered bilayer lipid membranes (t-BLMs) on polycrystalline gold electrodes. Similarly, as in the case of BLMs, we took advantage of proteoliposome adsorption/fusion to obtain a t-BLM system with reconstituted enzyme. The vesicle fusion on hydrophobic or hydrophilic substrates is one of the main ways to obtain a bilayer system with incorporated biological species. In this paper we present also our preliminary results of electrochemical experiments using rapid solution exchange technique on such t-BLMs systems and their comparison with painted solid supported membranes (SSMs) and BLMs. We have also followed the process of vesicles fusion onto thiolipid monolayer by means of in situ atomic force microscopy in tapping mode (TM-AFM). On the basis of these experiments, we conclude that DPPE-MPA and Chs-MPA molecules used in our experiments preserve lipid properties, allowing for at least partial reconstitution of Na(+),K(+)-ATP-ase into such t-BLMs. On the other hand, the relatively compact organization on polycrystalline gold and the hydrophobic nature of the first monolayer of tethered thiolipids slows down the proteoliposome fusion onto such monolayers and consequently hinders the protein insertion. However, this effect can be overcome by mechanical stimulus that facilitates proteoliposome delamination onto the self-assembled monolayer.

The protein-tethered lipid bilayer: a novel mimic of the biological membrane

A new concept of solid-supported tethered bilayer lipid membrane (tBLM) for the functional incorporation of membrane proteins is introduced. The incorporated protein itself acts as the tethering molecule resulting in a versatile system in which the protein determines the characteristics of the submembraneous space. This architecture is achieved through a metal chelating surface, to which histidine-tagged (His-tagged) membrane proteins are able to bind in a reversible manner. The tethered bilayer lipid membrane is generated by substitution of protein-bound detergent molecules with lipids using in-situ dialysis or adsorption. The system is characterized by surface plasmon resonance, quartz crystal microbalance, and electrochemical impedance spectroscopy. His-tagged cytochrome c oxidase (CcO) is used as a model protein in this study. However, the new system should be applicable to all recombinant membrane proteins bearing a terminal His-tag. In particular, combination of surface immobilization and membrane reconstitution opens new prospects for the investigation of functional membrane proteins by various surface-sensitive techniques under a defined electric field.

Electrochemical and photon polarization modulation infrared reflection absorption spectroscopy study of the electric field driven transformations of a phospholipid bilayer supported at a gold electrode surface

Electrochemistry and polarization modulation Fourier transform infrared reflection absorption spectroscopy (PM-FTIRRAS) was employed to investigate fusion of small unilamellar vesicles of 1,2dioyl-sn-glycero-3-phosphatidyl choline (DOPC) onto the Au(111) electrode. Electrochemical studies demonstrated that the DOPC vesicles fuse and spread onto the gold electrode surface at small charge densities -8 microC cm(-2)<sigmaM<0 microC cm(-2)(if the static electric field is <2 x 10(8) V/m) to form a bilayer. At sigmaM<-8 microC cm(-2), the film is detached from the electrode surface; however, the film remains in close proximity to the surface. The PM-FTIRRAS experiments demonstrated that the field-driven transformation of the film involves changes in hydration, orientation, and conformation in the polar headgroup region and that changes in the packing and tilt of the acyl chains are consequences of the headgroup rearrangements.