Correlation between the Melting Point of a Nanosolid and the Cohesive Energy of a Surface Atom

Extraordinary Thermal Stability and Sinter Resistance of Sub-2 nm Platinum Nanoparticles Anchored to a Carbon Support by Selenium

Nanoparticle sintering has long been a major challenge in developing catalytic systems for use at elevated temperatures. Here we report an in situ electron microscopy study of the extraordinary sinter resistance of a catalytic system comprised of sub-2 nm Pt nanoparticles on a Se-decorated carbon support. When heated to 700 °C, the average size of the Pt nanoparticles only increased from 1.6 to 2.2 nm, while the crystal structure, together with the {111} and {100} facets, of the Pt nanoparticles was well retained. Our electron microscopy analyses suggested that the superior resistance against sintering originated from the Pt-Se interaction. Confirmed by energy-dispersive X-ray elemental mapping and electron energy loss spectra, the Se atoms surrounding the Pt nanoparticles could survive the heating. This work not only offers an understanding of the physics behind the thermal behavior of this catalytic material but also sheds light on the future development of sinter-resistant catalytic systems.

Melting Is Well-Known, but Is It Also Well-Understood?

Contrary to continuous phase transitions, where renormalization group theory provides a general framework, for discontinuous phase transitions such a framework seems to be absent. Although the thermodynamics of the latter type of transitions is well-known and requires input from two phases, for melting a variety of one-phase theories and models based on solids has been proposed, as a generally accepted theory for liquids is (yet) missing. Each theory or model deals with a specific mechanism using typically one of the various defects (vacancies, interstitials, dislocations, interstitialcies) present in solids. Furthermore, recognizing that surfaces are often present, one distinguishes between mechanical or bulk melting and thermodynamic or surface-mediated melting. After providing the necessary preliminaries, we discuss both types of melting in relation to the various defects. Thereafter we deal with the effect of pressure on the melting process, followed by a discussion along the line of type of materials. Subsequently, some other aspects and approaches are dealt with. An attempt to put melting in perspective concludes this review.

Nanomaterials Application in Endodontics

In recent years, nanomaterials have become increasingly present in medicine, especially in dentistry. Their characteristics are proving to be very useful in clinical cases. Due to the intense research in the field of biomaterials and nanotechnology, the efficacy and possibilities of dental procedures have immensely expanded over the years. The nano size of materials allows them to exhibit properties not present in their larger-in-scale counterparts. The medical procedures in endodontics are time-consuming and mostly require several visits to be able to achieve the proper result. In this field of dentistry, there are still major issues about the removal of the mostly bacterial infection from the dental root canals. It has been confirmed that nanoparticles are much more efficient than traditional materials and appear to have superior properties when it comes to surface chemistry and bonding. Their unique antibacterial properties are also promising features in every medical procedure, especially in endodontics. High versatility of use of nanomaterials makes them a powerful tool in dental clinics, in a plethora of endodontic procedures, including pulp regeneration, drug delivery, root repair, disinfection, obturation and canal filling. This study focuses on summing up the current knowledge about the utility of nanomaterials in endodontics, their characteristics, advantages, disadvantages, and provides a number of reasons why research in this field should be continued.

Gallium-indium nanoparticles as phase change material additives for tunable thermal fluids

One of the most critical limitations for high-power electronics today is thermal management and routing thermal energy efficiently away from thermally sensitive components. A potential solution to this problem is the integration of cooling channels in close proximity to thermally sensitive materials for increased heat removal efficiency. These channels typically use single phase fluids (liquid), dual phase fluids (vapor-liquid), or suspended organic/polymer phase change material particles in a fluid (PCM slurry). Expanding upon the latter, this work demonstrates the use of inorganic Ga-In alloy nanoparticles (NPs) suspended in a traditional thermal transport fluid to simultaneously (1) increase the overall thermal diffusivity of the fluid and (2) serve as a cyclable solid-liquid PCM slurry which provides a thermal sink that is definable over a wide range of relevant temperatures for power electronics. Herein, the relationship between particle size, composition, and volume fraction are explored as they relate to the PCM slurry optimum working temperature, total energy absorption, and rheological properties. A mere 0.10 volume fraction of Ga-In NPs is reported to increase the overall thermal conductivity by nearly 50% and can be optimized to melt at temperatures as low as -46 °C. Based on thermal measurements, it was observed that these nanoparticle systems lack the preference to form αGa and have a large thermal hysteresis due to exhibiting extreme undercooling, with crystallization temperatures near -130 °C, enabling opportunities within extreme environments such as space applications or low temperature imaging systems.

The melting temperature of nanorods: diameter and length dependences

An analytical thermodynamic model was developed to describe the effect of diameter and length on the melting temperature of nanorods.

Scaled-Up Production and Tableting of Grindable Electrospun Fibers Containing a Protein-Type Drug

The aims of this work were to develop a processable, electrospun formulation of a model biopharmaceutical drug, β-galactosidase, and to demonstrate that higher production rates of biopharmaceutical-containing fibers can be achieved by using high-speed electrospinning compared to traditional electrospinning techniques. An aqueous solution of 7.6 w/w% polyvinyl alcohol, 0.6 w/w% polyethylene oxide, 9.9 w/w% mannitol, and 5.4 w/w% β-galactosidase was successfully electrospun with a 30 mL/h feeding rate, which is about 30 times higher than the feeding rate usually attained with single-needle electrospinning. According to X-ray diffraction measurements, polyvinyl alcohol, polyethylene oxide, and β-galactosidase were in an amorphous state in the fibers, whereas mannitol was crystalline (δ-polymorph). The presence of crystalline mannitol and the low water content enabled appropriate grinding of the fibrous sample without secondary drying. The ground powder was mixed with excipients commonly used during the preparation of pharmaceutical tablets and was successfully compressed into tablets. β-galactosidase remained stable during each of the processing steps (electrospinning, grinding, and tableting) and after one year of storage at room temperature in the tablets. The obtained results demonstrate that high-speed electrospinning is a viable alternative to traditional biopharmaceutical drying methods, especially for heat sensitive molecules, and tablet formulation is achievable from the electrospun material prepared this way.

Size and shape dependent melting temperature of metallic nanomaterials

This study aims to characterize the size and shape dependent melting temperature of nanomaterials. Considering that surface atoms and interior atoms affect the melting of materials in different manners, we thus define an equivalent relationship between the contribution of surface atoms and interior atoms. Based on this definition, a criterion of melting is proposed through introducing a critical energy storage density of melting, the sum of the contribution of surface atoms and the interior atoms. According to the proposed criterion, a new theoretical model without any adjustable parameters is developed to characterize the size effect of melting temperatures of nanomaterials. The model predictions are in good agreement with the available experimental data or molecular dynamics simulations. This model uncovers the quantitative relationship between the melting temperature, size, atomic diameter and shape of nanomaterials. In addition, this model is extended to predict the size dependent glass transition temperatures of polymers. This study can help to better understand and characterize the size dependent melting temperatures of nanomaterials, as well as the size dependent glass transition temperatures of polymers.

Size-dependent melting thermodynamic properties of selenium nanowires in theory and experiment

A new core–shell melting model of nanowires was proposed to explain the size effect on the melting thermodynamics of nanowires.

Shape-dependent structural and magnetic properties of Fe nanoparticles studied through simulation methods

Studying the shape-dependent structural and magnetic properties of nanoparticles is one of the most necessary scientific challenges in order to match these nano-objects for adequate applications. In this research paper, the shape effect of iron nanoparticles (FeNPs) on structural and magnetic properties was investigated on the basis of a combination of Molecular Statics (MS) and Monte Carlo (MC) simulations. To this end, three kinds of FeNP shapes (such as spherical, planar and rod) in an equal volume have been considered. The coordination number distribution of FeNPs obtained from the data extracted by MS simulations was exploited for performing MC simulations on the familiar Ising model. The numerical findings obtained showed that the structural stability, the Curie temperature as well as the shape of the hysteresis loop are correlated with the FeNP shape.

The shape effect of iron nanoparticles (FeNPs) on structural and magnetic properties was investigated on the basis of a combination of Molecular Statics (MS) and Monte Carlo (MC) simulations.

Interface effect on the cohesive energy of nanostructured materials and substrate-supported nanofilms

The cohesive energy is a key quantity to determine the mechanical, physical, chemical, and electronic properties of materials.

Lung biodurability and free radical production of cellulose nanomaterials

Abstract The potential applications of cellulose nanomaterials in advanced composites and biomedicine makes it imperative to understand their pulmonary exposure to human health. Here, we report the results on the biodurability of three cellulose nanocrystal (CNC), two cellulose nanofibril (CNF) and a benchmark cellulose microcrystal (CMC) when exposed to artificial lung airway lining fluid (SUF, pH 7.3) for up to 7 days and alveolar macrophage phagolysosomal fluid (PSF, pH 4.5) for up to 9 months. X-ray diffraction analysis was used to monitor biodurability and thermogravimetry, surface area, hydrodynamic diameter, zeta potential and free radical generation capacity of the samples were determined (in vitro cell-free and RAW 264.7 cell line models). The CMC showed no measurable changes in crystallinity (x(CR)) or crystallite size D in either SUF or PSF. For one CNC, a slight decrease in x(CR) and D in SUF was observed. In acidic PSF, a slight increase in x(CR) with exposure time was observed, possibly due to dissolution of the amorphous component. In a cell-free reaction with H₂O₂, radicals were observed; the CNCs and a CNF generated significantly more ·OH radicals than the CMC (p < 0.05). The ·OH radical production correlates with particle decomposition temperature and is explained by the higher surface area to volume ratio of the CNCs. Based on their biodurability, mechanical clearance would be the primary mechanism for lung clearance of cellulose materials. The production of ·OH radicals indicates the need for additional studies to characterize the potential inhalation hazards of cellulose.

Local bond-electron-energy relaxation of Mo atomic clusters and solid skins

Mo(100, 110) skins and atomic clusters share the common nature of atomic undercoordination induced local bond strain and the associated quantum entrapment and valence electron polarization.

The effects of the size of nanocrystalline materials on their thermodynamic and mechanical properties

This work has considered the intrinsic influence of bond energy on the macroscopic, thermodynamic, and mechanical properties of crystalline materials. A general criterion is proposed to evaluate the properties of nanocrystalline materials. The interrelation between the thermodynamic and mechanical properties of nanomaterials is presented and the relationship between the variation of these properties and the size of the nanomaterials is explained. The results of our work agree well with thermodynamics, molecular dynamics simulations, and experimental results. This method is of significance in investigating the size effects of nanomaterials and provides a new approach for studying their thermodynamic and mechanical properties.

Modeling the size- and shape-dependent cohesive energy of nanomaterials and its applications in heterogeneous systems

Studying the properties of nanomaterials can help us to understand the nature of the particular behavior of small-scale materials and forecast new advanced functionalized materials. The cohesive energy, as one of the most important fundamental properties, is strongly connected to the unique properties of nanostructures. In this work, we establish a theoretical model to investigate the effects of size and shape on the cohesive energies of free and embedded nanoparticles based on thermodynamic concepts. It is found that the cohesive energy of free nanoparticles usually decreases as its size decreases. However, there are two distinct variations of embedded nanoparticles in heterogeneous systems. One is that the cohesive energy decreases with the decreasing size, and the other is that the cohesive energy increases as size decreases. The present modeling results and predictions are very consistent with experiments and other existing theoretical models, implying that the model could be expected to be a general approach to understand the cohesive energy of nanomaterials.

Thermal stability of electrodeposited platinum nanowires and morphological transformations at elevated temperatures

Pt nanowires were prepared by template electrodeposition using ion track etched polymer membranes and analysed with respect to their thermal stability. Driven by Rayleigh instability, the polycrystalline Pt nanostructures experienced structural transformations and finally fragmented into linear chains of nanospheres at temperatures much below the melting point of bulk Pt. Morphological changes were systematically studied by electron microscopy and compared with previously reported results on other metal nanowires and theoretical predictions. In addition, nanowires could readily be interconnected to two-dimensional assemblies by taking advantage of the rapid diffusion processes. This study will help to predict the durability of integrated nanowires and contributes to the understanding of thermal-induced transformations for polycrystalline nanowires.

Correlation between the band gap, elastic modulus, Raman shift and melting point of CdS, ZnS, and CdSe semiconductors and their size dependency

With structural miniaturization down to the nanoscale, the detectable quantities of solid materials no longer remain constant but become tunable. For the II-VI semiconductors example, the band gap expands, the elastic modulus increases, the melting point drops, and the Raman optical phonons experience red shift associated with creation of low frequency Raman acoustic modes that undergo blue shift with decreasing the dimensional scale. In order to understand the common origin of the size dependency of these seemingly irrelevant properties, we formulated these quantities for CdS, ZnS, and CdSe semiconductors from the perspectives of bond order-length-strength correlation and the local bond averaging approach. Consistency between the theory predictions and the measured size dependence of these quantities clarified that the undercoordination-induced local strain and quantum entrapment and the varied fraction of undercoordinated atoms of the entire solid correlate these quantities and dominate their size effect.

Universal relation for size dependent thermodynamic properties of metallic nanoparticles

The previous model on surface free energy has been extended to calculate size dependent thermodynamic properties (i.e., melting temperature, melting enthalpy, melting entropy, evaporation temperature, Curie temperature, Debye temperature and specific heat capacity) of nanoparticles. According to the quantitative calculation of size effects on the calculated thermodynamic properties, it is found that most thermodynamic properties of nanoparticles vary linearly with 1/D as a first approximation. In other words, the size dependent thermodynamic properties P(n) have the form of P(n) = P(b)(1 -K/D), in which P(b) is the corresponding bulk value and K is the material constant. This may be regarded as a scaling law for most of the size dependent thermodynamic properties for different materials. The present predictions are consistent literature values.

Dominance of broken bonds and nonbonding electrons at the nanoscale

Although they exist ubiquitously in human bodies and our surroundings, the impact of nonbonding lone electrons and lone electron pairs has long been underestimated. Recent progress demonstrates that: (i) in addition to the shorter and stronger bonds between under-coordinated atoms that initiate the size trends of the otherwise constant bulk properties when a substance turns into the nanoscale, the presence of lone electrons near to broken bonds generates fascinating phenomena that bulk materials do not demonstrate; (ii) the lone electron pairs and the lone pair-induced dipoles associated with C, N, O, and F tetrahedral coordination bonding form functional groups in biological, organic, and inorganic specimens. By taking examples of surface vacancy, atomic chain end and terrace edge states, catalytic enhancement, conducting-insulating transitions of metal clusters, defect magnetism, Coulomb repulsion at nanoscale contacts, Cu(3)C(2)H(2) and Cu(3)O(2) surface dipole formation, lone pair neutralized interface stress, etc, this article will focus on the development and applications of theory regarding the energetics and dynamics of nonbonding electrons, aiming to raise the awareness of their revolutionary impact to the society. Discussion will also extend to the prospective impacts of nonbonding electrons on mysteries such as catalytic enhancement and catalysts design, the density anomalies of ice and negative thermal expansion, high critical temperature superconductivity induced by B, C, N, O, and F, the molecular structures and functionalities of CF(4) in anti-coagulation of synthetic blood, NO signaling, and enzyme telomeres, etc. Meanwhile, an emphasis is placed on the necessity and effectiveness of understanding the properties of substances from the perspective of bond and nonbond formation, dissociation, relaxation and vibration, and the associated energetics and dynamics of charge repopulation, polarization, densification, and localization. Finding and grasping the factors controlling the nonbonding states and making them of use in functional materials design and identifying their limitations will form, in the near future, a subject area of "nonbonding electronics and energetics", which could be even more challenging, fascinating, promising, and rewarding than dealing with core or valence electrons alone.

Behind the Quantum and Size Effects: Broken-Bond-Induced Local Strain and Skin-Depth Densified Quantum Trapping of Charge and Energy

Shrinking the size of a solid down to nanometer scale is indeed fascinating, which makes all the otherwise constant physical quantities to be tunable such as the Young’s modulus, dielectric constant, melting point, etc. The variation of size also generates novel properties that can hardly be seen in the bulk such as the conductor-insulator and nonmagnetic-magnetic transition of noble metals at the nanoscale. Although the physics of materials at the nanoscale has been extensively investigated, the laws governing the energetic and dynamic behavior of electrons at such a scale and their consequences on the tunable physical properties of nanostructures have not been well understood [C. Q. Sun, Prog Solid State Chem 35, 1-159 (2007); Prog Mater Sci 54, 179-307 (2009)]. The objective of the contribution is to update the recent progress in dealing with the coordination-resolved energetic and dynamic behavior of bonds in the low-dimensional systems with consideration of the joint effect of temperature and pressure. It is shown that the broken-bond-induced local strain and the associated charge and energy quantum trapping at the defect sites perturbs the atomic cohesive energy, electroaffinity, the Hamiltonian and the associated properties of entities ranging from point defects, surfaces, nanocavities and nanostructures. Application of the theories to observations has led to consistent understanding of the behavior of nanometer-sized materials and the interdependence of these entities as well as the means of determining the bond energy through the temperature-dependent measurements.

Melting and superheating of nanowires--a nanotube approach

We have investigated the size-dependent melting of nanotubes based on a thermodynamic approach and shown that the melting temperature of nanotubes depends on the outer radius and on the inner radius through the thickness of the nanotubes. Size-dependent melting of nanowires and thin films has been derived from that of nanotubes. We validate the size-dependent melting of nanotubes, nanowires and thin films by comparing the results with available molecular dynamic simulations and experimental results. It has also been inferred that superheating occurs when the melting starts from the inner surface and proceeds towards the outer surface, while melting point depression occurs when the melting starts from the outer surface and proceeds towards the inner surface.

Thermodynamic Properties of Supported and Embedded Metallic Nanocrystals: Gold on/in SiO2

We report on the calculations of the cohesive energy, melting temperature and vacancy formation energy for Au nanocrystals with different size supported on and embedded in SiO2. The calculations are performed crossing our previous data on the surface free energy of the supported and embedded nanocrystals with the theoretical surface-area-difference model developed by W. H. Qi for the description of the size-dependent thermodynamics properties of low-dimensional solid-state systems. Such calculations are employed as a function of the nanocrystals size and surface energy. For nanocrystals supported on SiO2, as results of the calculations, we obtain, for a fixed nanocrystal size, an almost constant cohesive energy, melting temperature and vacancy formation energy as a function of their surface energy; instead, for those embedded in SiO2, they decreases when the nanocrystal surface free energy increases. Furthermore, the cohesive energy, melting temperature and vacancy formation energy increase when the nanocrystal size increases: for the nanocrystals on SiO2, they tend to the values of the bulk Au; for the nanocrystals in SiO2 in correspondence to sufficiently small values of their surface energy, they are greater than the bulk values. In the case of the melting temperature, this phenomenon corresponds to the experimentally well-known superheating process.

THE EFFECT OF MIE-TYPE POTENTIAL RANGE ON THE COHESIVE ENERGY OF METALLIC NANOPARTICLES

We investigate the effect of Mie-type potential range on the cohesive energy of metallic nanoparticles using the size-dependent potential parameters method. The predicted cohesive energy for different cubic structures is observed to decrease with decreasing the particle size, and increase with decreasing the range of the interatomic potential, a result which is in the right direction at least to predict the experimental values of Molybdenum and Tungsten nanoparticles.

A scaling law for properties of nano-structured materials

In this brief communication, we identify intrinsic length scales of several physical properties at the nano-scale and show that, for nano-structures whose characteristic sizes are much larger than these scales, the properties obey a simple scaling law. The underlying cause of the size-dependence of these properties at the nano-scale is the competition between surface and bulk energies. This law provides a yardstick for checking the accuracy of experimentally measured or numerically computed properties of nano-structured materials over a broad size range and can thus help replace repeated and exhaustive testing by one or a few tests.

Phenomenological Predictions of Cohesive Energy and Structural Transition of Nanoparticles

In this paper, it is shown that a liquid-drop model (LDM) can predict the size-dependent cohesive energy (SDCE) of large nanoparticles and clusters (particles with few atoms) quantitatively. The cohesive energy decreases linearly with the inverse of the particle size both for large nanoparticles and clusters though the slopes are different. This indicates that there are three different regions (I-III) of SDCE in the complete size range. Regions I and II represent the SDCE of large nanoparticles and clusters, respectively, while region II represents the intermediate region where the cohesive energy is almost size-independent. Different regions of SDCE correspond to different structures of nanoparticles, and structural transition associated with the particle size can easily be predicted from the SDCE. Analyzing the cohesive energy data on the basis of LDM, it is shown that the surface tension decreases with decreasing size for very small nanoparticles. The Tolman equation can account for the variation of surface tension by predicting the size dependency of the Tolman length.