The Interaction between PEO-PPO-PEO Triblock Copolymers and Ionic Surfactants in Aqueous Solution Studied Using Light Scattering and Calorimetry

Celecoxib-hydroxypropyl-β-cyclodextrin inclusion complex in a chitosan/PEO-PPO-PEO block copolymer matrix: Structural effect and drug release

HYPOTHESIS

Triblock copolymers of poly(ethylene oxide) and poly(propylene oxide)-based matrices, such as Poloxamer 407 (P407) or Pluronic® F127, are extensively utilized in drug delivery and permeation systems due to their FDA approval and listing in the US and European Pharmacopoeias. The study hypothesizes that incorporating 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) and the celecoxib-HP-β-CD inclusion complex into a 16 wt% P407 and chitosan blend in an aqueous acetic acid solution will affect the system's rheological and structural properties.

EXPERIMENTS

Rheological, small-angle X-ray scattering (SAXS), and dynamic light scattering (DLS) experiments were conducted to assess the impact of acetic acid and chitosan on the 16 wt% P407 and chitosan blend. Additionally, in vitro drug release studies were performed to monitor the drug release profile over time.

FINDINGS

The addition of HP-β-CD was found to inhibit gel formation in the 16 wt% P407 and chitosan blend. However, the presence of the celecoxib-HP-β-CD inclusion complex showed no significant structural effects compared to P407 blended with chitosan alone. Rheological and SAXS analyses demonstrated that acetic acid led to the formation of a lamellar phase due to the lower pH, facilitating injectability. The presence of chitosan in acetic acid resulted in the detection of a hexagonal phase, affecting the release of celecoxib.

Effect of salt addition on a triblock copolymer-zwitterionic surfactant assembly: insight from excited-state proton transfer

Copolymer-surfactant assemblies are frequently utilized across various fields, from medicine to nanotechnology. Understanding the organization of the mixed assemblies in a saline environment will further expand their application horizons, especially under physiological conditions. Excited-state proton transfer (ESPT) can provide insight into the hydration nature and organization of the non-toxic assembly of a triblock copolymer F127 (poly-(ethylene oxide)101 (PEO101)-poly(propylene oxide)56 (PPO56)-PEO101)) and a zwitterionic sulfobetaine surfactant N-dodecyl-N,N-dimethyl-3-ammoniopropane sulfonate (SB12). Here, we present a comprehensive investigation of the compactness and hydration nature of the F127-SB12 mixed assemblies at different salt concentrations using the ESPT of 8-hydroxy pyrene-1,3,6-trisulfonate (HPTS). In the absence of salts, gradual SB12 addition to a premicellar (0.4 mM) or a post-micellar (4 mM) F127 solution leads to an anomalous modulation of the protonated and deprotonated emission bands. The emission intensity ratio (protonated/deprotonated) first increases to a maximum at a particular SB12 concentration (6 mM and 35 mM for the premicellar and post-micellar F127 assemblies, respectively), and then the ratio decreases with a further increase in the surfactant concentration. Since the intensity ratio is an indicator of the retardation of the ESPT process, the mixed micellar configuration displaying a maximum intensity ratio represents the most compact and least hydrated state. Salt addition to this configuration lowers the intensity ratio, signifying an enhanced ESPT process. Dynamic light scattering (DLS) results indicate that the size of the mixed assembly remains almost unaltered with the addition of salts. Thus, salinity enhances the ESPT process inside the F127-SB12 mixed assemblies without significantly altering the hydrodynamic radius.

Effect of polymer/surfactant complexation on diffusiophoresis of colloids in surfactant concentration gradients

HYPOTHESIS

A concentration gradient of surfactants in the presence of polymers that non-covalently associate with surfactants will exhibit a continually varying distribution of complexes with different composition, charge, and size. Since diffusiophoresis of colloids suspended in a solute concentration gradient depends on the relaxation of the gradient and on the interactions between solutes and particles, polymer/surfactant complexation will alter the rate of diffusiophoresis driven by surfactant gradients relative to that observed in the same concentration gradient in the absence of polymers.

EXPERIMENTS

A microfluidic device was used to measure diffusiophoresis of colloids suspended in solutions containing a gradient of sodium dodecylsulfate (SDS) in the presence or absence of a uniform concentration of Pluronic P123 poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) nonionic triblock copolymers. To interpret the effect of P123 on the rate of colloid diffusiophoresis, electrophoretic mobility and dynamic light scattering measurements of the colloid/solute systems were performed, and a numerical model was constructed to account for the effects of complexation on diffusiophoresis.

FINDINGS

Polymer/surfactant complexation in solute gradients significantly enhanced diffusiophoretic transport of colloids. Large P123/SDS complexes formed at low SDS concentrations yielded low collective solute diffusion coefficients that prolonged the existence of strong concentration gradients relative to those without P123 to drive diffusiophoresis.

A multiscale time-Laplace method to extract relaxation times from non-stationary dynamic light scattering signals

Dynamic Light Scattering (DLS) is a well-known technique to study the relaxation times of systems at equilibrium. In many soft matter systems, we actually have to consider non-equilibrium or non-stationary situations. We discuss here the principles, the signal processing techniques we developed, based on regularized inverse Laplace transform, sliding with time, and the light scattering signal acquisition, which enable us to use DLS experiments in this general situation. In this article, we show how to obtain such a time-Laplace analysis. We claim that this method can be adapted to numerous DLS experiments dealing with non-equilibrium systems so as to extract the non-stationary distribution of relaxation times. To prove that, we test this time-Laplace method on three different non-equilibrium processes or systems investigated by means of the DLS technique: the cooling kinetics of a colloidal particle solution, the sol-gel transition and the internal dynamics of a living cell nucleus.

Structure and composition of mixed micelles formed by nonionic block copolymers and ionic surfactants in water determined by small-angle neutron scattering with contrast variation

HYPOTHESIS

Complex fluids comprising polymers and surfactants exhibit interesting properties which depend on the overall composition and solvent quality. The ultimate determinants of the macroscopic properties are the nano-scale association domains. Hence it is important to ascertain the structure and composition of the domains, and how they respond to the overall composition.

EXPERIMENTS

The structure and composition of mixed micelles formed in aqueous solution between poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers (Pluronics or Poloxamers) and the ionic surfactant sodium dodecylsulfate (SDS) are determined from an analysis of small-angle neutron scattering (SANS) intensity data obtained at different contrasts. Different polymers and concentrations have been probed.

FINDINGS

The SDS + Pluronic mixed micelles include polymer and some water in the micelle core that is formed primarily by alkyl chains. This is different than what was previously reported, but is consistent with a variety of experimental observations. This is the first report on the structure of SDS + Pluronic P123 (EO₁₉PO₆₉EO₁₉) assemblies. The effects on the mixed micelle structure and composition of the surfactant concentration and the polymer hydrophobicity are discussed here in the context of interactions between the different components.

How Detergents Dissolve Polymeric Micelles: Kinetic Pathways of Hybrid Micelle Formation in SDS and Block Copolymer Mixtures

Mixtures of amphiphilic polymers and surfactants are used in a wide range of applications, e.g., pharmaceuticals, detergents, cosmetics, and drug delivery systems. Still, many questions remain on how the structure and, in particular, the kinetics of block copolymer micelles are affected in the presence of surfactants and what controls the solubilization kinetics. In this work, we have studied the stability and solubilization kinetics of block copolymer micelles upon the addition of the surfactant sodium dodecyl sulfate (SDS) using small-angle X-ray/neutron scattering. The ability of the surfactant to dissolve polymer micelles or form mixed micelles has been investigated using two types of amphiphilic polymers, poly(ethylene-alt-propylene)-poly(ethylene oxide) (PEP1-PEO20) and n-alkyl-functionalized PEO (C28-PEO5). The exchange kinetics of C28-PEO5 micelles are in the order of hours, while PEP1-PEO20 micelles are known to be frozen on a practical timescale. In this work, we show that the addition of SDS to PEP1-PEO20 provides virtually no solubilization, even after an extended period of time. However, upon adding SDS to C28-PEO5 micelles, we observe micellar dissolution and formation of mixed micelles occurring on the timescale of hours. Using a coexistence model of mixed and neat micelles, the SAXS data were analyzed to provide detailed structural parameters over time. First, we observe a fast fragmentation/fission step followed by a slow reorganization process. The latter process is essentially independent of concentration at low volume fraction but is greatly accelerated at larger concentrations. This might indicate a crossover from a predominance of molecular exchange to fusion/fission processes.

Depletion Forces Induced by Mixed Micelles of Nonionic Block Copolymers and Anionic Surfactants

Depletion forces were measured between a silica sphere and a silica plate in solutions containing nonionic Pluronic P123 poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) triblock copolymers and anionic sodium dodecyl sulfate (SDS) surfactants using colloidal probe atomic force microscopy. Prior research established synergistic depletion force enhancement in solutions containing SDS and unimeric Pluronic F108 block copolymers via formation of large pseudo-polyelectrolyte complexes. The current work addresses a more complex system where the polymer is above its critical micelle concentration, and surfactant binding alters not only the size and charge of the micelles but also the number of polymers per micelle. Force profiles were measured in 10 000 ppm P123 (1 wt %, corresponding to 1.72 mM based on average molar mass) solutions containing SDS at concentrations up to 64 mM and compared to micellar P123 solutions and to P123-free SDS solutions. Whereas force profiles in the SDS-free micellar P123 solutions were purely repulsive, P123/SDS complexation produced synergistic depletion force enhancement for SDS concentrations between 2 and 32 mM. The synergism that occurred within a finite SDS concentration range was explained by comparing the hydrodynamic size, molar mass, charge, and concentration of depletants in P123/SDS mixtures and their respective single-component solutions obtained with the aid of dynamic light scattering, static light scattering, and dodecyl sulfate ion-selective electrode measurements. These measurements showed that complexation produced effects that would be mutually counteracting with respect to depletion forces: decreasing the mixed micelle hydrodynamic diameter relative to SDS-free P123 micelles would tend to weaken depletion forces, while adding charge and decreasing the aggregation number of polymers per micelle (thereby increasing the number concentration of micellar depletants) would tend to strengthen depletion forces.

Association between Nonionic Amphiphilic Polymer and Ionic Surfactant in Aqueous Solutions: Effect of Polymer Hydrophobicity and Micellization

The interaction in aqueous solutions of surfactants with amphiphilic polymers can be more complex than the surfactant interactions with homopolymers. Interactions between the common ionic surfactant sodium dodecyl sulfate (SDS) and nonionic amphiphilic polymers of the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) type have been probed utilizing a variety of experimental techniques. The polymer amphiphiles studied here are Pluronic F127 (EO₁₀₀PO₆₅EO₁₀₀) and Pluronic P123 (EO₁₉PO₆₉EO₁₉), having the same length PPO block but different length PEO blocks and, accordingly, very different critical micellization concentrations (CMC). With increasing surfactant concentration in aqueous solutions of fixed polymer content, SDS interacts with unassociated PEO-PPO-PEO molecules to first form SDS-rich SDS/Pluronic assemblies and then free SDS micelles. SDS interacts with micellized PEO-PPO-PEO to form Pluronic-rich SDS/Pluronic assemblies, which upon further increase in surfactant concentration, break down and transition into SDS-rich SDS/Pluronic assemblies, followed by free SDS micelle formation. The SDS-rich SDS/Pluronic assemblies exhibit polyelectrolyte characteristics. The interactions and mode of association between nonionic macromolecular amphiphiles and short-chain ionic amphiphiles are affected by the polymer hydrophobicity and its concentration in the aqueous solution. For example, SDS binds to Pluronic F127 micelles at much lower concentrations (~0.01 mM) when compared to Pluronic P123 micelles (~1 mM). The critical association concentration (CAC) values of SDS in aqueous PEO-PPO-PEO solutions are much lower than CAC in aqueous PEO homopolymer solutions.

Synthesis of nanostructured silica/hydroxyapatite hybrid particles containing amphiphilic triblock copolymer for effectively controlling hydration layer structures with cytocompatibility

We synthesized nanostructured mesoporous silica (MS)/hydroxyapatite (HA) hybrid particles in the presence of amphiphilic poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO₂₀PPO₇₀PEO₂₀) triblock copolymer (P123). The particles exhibited slit-shaped mesostructures and underwent hybridization reaction between the MS and HA phases containing P123. Furthermore, the aggregated form of the particles exhibited dispersion stability in water in the monodispersed state (average particle size: 145 nm and coefficient of variation: 4.3% in the case of the maximum added amount of P123). Then, the structures of the hydration layer and the adsorbed protein on the particles were investigated to understand the effect of the hydration layer structures on the protein secondary structures. The ratio of the bonding water (intermediate and nonfreezing water) to free water increased upon hybridization, and it decreased with increasing P123 concentration. Upon hybridization, the component ratio of the asymmetric O-H stretching vibration between free water molecules decreased, and that of the symmetric O-H stretching vibration of intermediate water molecules increased. With increasing P123 concentration, the asymmetric O-H stretching vibration between free water molecules increased and the symmetric O-H stretching vibration of intermediate water molecules decreased. It was found that the protein native state component ratios of α-helix and β-sheet increased with increasing symmetric O-H stretching vibration between intermediate water molecules, and they decreased with decreasing asymmetric O-H stretching vibration between free water molecules. Moreover, the cytotoxicity against osteoblasts (MC3T3-E1) was evaluated and the hybrid particles exhibited a high cell density, indicating their bioactivity. On the hybrid particles interacting with P123, the cells were three-dimensionally assembled and uniaxially grown with the culture. Therefore, this is the first successful report of the synthesis of nanostructured MS/HA hybrid particles interacting with P123, and the controlled hydration layer structures on the particle surfaces were found to contribute to the protein secondary structures, promoting cytocompatibility.

Study of the Lamellar and Micellar Phases of Pluronic F127: A Molecular Dynamics Approach

In this work, we analyzed the behavior of Pluronic F127 through molecular dynamics simulations at the coarse-grain level, focusing on the micellar and lamellar phases. To this aim, two initial polymer conformations were considered, S-shape and U-shape, for both simulated phases. Through the simulations, we were able to examine the structural and mechanical properties that are difficult to access through experiments. Since no transition between S and U shapes was observed in our simulations, we inferred that all single co-polymers had memory of their initial configuration. Nevertheless, most copolymers had a more complex amorphous structure, where hydrophilic beads were part of the lamellar-like core. Finally, an overall comparison of the micellar a lamellar phases showed that the lamellar thickness was in the same order of magnitude as the micelle diameter (approx. 30 nm). Therefore, high micelle concentration could lead to lamellar formation. With this new information, we could understand lamellae as orderly packed micelles.

Polymer-assisted drug sequestration from plasma protein by a surfactant with curtailed denaturing capacity

The capability of a surfactant to sequester a drug bound to plasma protein was investigated using steady-state and time-resolved spectroscopic techniques. Surfactants are known to denature protein, and hence are not suitable for the sequestration of a drug from protein. Herein, we show that the denaturing capacity of a surfactant is curtailed completely and its drug sequestration power is enhanced in the presence of biocompatible Pluronic micelles due to the formation of unique supramolecular assemblies. Further, our detailed studies indicate that the concentration of surfactant required for the sequestration of a drug is less than its critical micellar concentration (CMC). The extent of sequestration of drug by polymer-surfactant supramolecular assemblies can be tuned finely by controlling the concentration of surfactant. Detailed analysis showed that up to ∼85% sequestration of a drug from plasma protein could be achieved using a sub-CMC concentration of surfactant. Our results clearly show that controlled sequestration of a drug from plasma protein can be achieved with a reduction in the protein denaturing properties of surfactants.

A fluorescence study of the loading and time stability of doxorubicin in sodium cholate/PEO-PPO-PEO triblock copolymer mixed micelles

HYPOTHESIS

Doxorubicin hydrochloride (DX) is one of the most powerful anticancer agents though its clinical use is impaired by severe undesired side effects. DX encapsulation in nanocarrier systems has been introduced as a mean to reduce its toxicity. Micelles of the nonionic triblock copolymers of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) (PEO-PPO-PEO), are very promising carrier systems. The positive charge of DX confines the drug to the hydrophilic corona region of the micelles. The use of mixed micelles of PEO-PPO-PEO copolymers and a negatively charged bile salt should favour the solubilization of DX in the apolar core region of the micelles.

EXPERIMENTS

We studied the DX uptake in the micellar systems formed by sodium cholate (NaC) and the PEO₁₀₀PPO₆₅PEO₁₀₀ (F127) copolymer, prepared with different mole ratios (MR = n_NaC/n_F127) in the range 0 ÷ 1. The systems were characterized by small angle X-ray scattering (SAXS) and dynamic light scattering (DLS); DX encapsulation was followed by steady-state and time-resolved fluorescence spectroscopy.

FINDINGS

The successful solubilization of DX in the host micellar systems did not affect their structure, as evidenced by both SAXS and DLS data. In the presence of NaC, DX experiences a more apolar environment as indicated by its characteristic fluorescent behaviour. The almost complete uptake of the drug occurred shortly after the sample preparation; however, time resolved fluorescence revealed a slow partition of DX between corona and core regions of the micelles. DX degradation in the mixed micellar systems was markedly reduced relative to aqueous DX solutions.

A, Paul A. Tuning water oxidation reactivity by employing surfactant directed synthesis of porous Co3O4 nanomaterials

We have explored Co₃O₄ based nanomaterials for the oxygen evolution reaction prepared via a surfactant directed soft-templating strategy.

Triblock-Copolymer-Assisted Mixed-Micelle Formation Results in the Refolding of Unfolded Protein

The present work reports a new strategy for triblock-copolymer-assisted refolding of sodium dodecyl sulfate (SDS)-induced unfolded serum protein human serum albumin (HSA) by mixed-micelle formation of SDS with poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer EO₂₀PO₆₈EO₂₀ (P123) under physiological conditions. The steady-state and time-resolve fluorescence results show that the unfolding of HSA induced by SDS occurs in a stepwise manner through three different phases of binding of SDS, which is followed by a saturation of interaction. Interestingly, the addition of polymeric surfactant P123 to the unfolded protein results in the recovery of ∼87% of its α-helical structure, which was lost during SDS-induced unfolding. This is further corroborated by the return of the steady-state and time-resolved fluorescence decay parameters of the intrinsic tryptophan (Trp214) residue of HSA to the initial nativelike condition. The isothermal titration calorimetry (ITC) data also substantiates that there is almost no interaction between P123 and the native state of the protein. However, the mixed-micelle formation, accompanied by substantial binding affinities, removes the bound SDS molecules from the scaffolds of the unfolded state of the protein. On the basis of our experiments, we conclude that the formation of mixed micelles between SDS and P123 plays a pivotal role in refolding the protein back to its nativelike state.

Adsorption of poly(ethylene oxide)-containing amphiphilic polymers on solid-liquid interfaces: Fundamentals and applications

The adsorption of amphiphilic molecules of varying size on solid-liquid interfaces modulates the properties of colloidal systems. Nonionic, poly(ethylene oxide) (PEO)-based amphiphilic molecules are particularly useful because of their graded hydrophobic-hydrophilic nature, which allows for adsorption on a wide array of solid surfaces. Their adsorption also results in other useful properties, such as responsiveness to external stimuli and solubilization of hydrophobic compounds. This review focuses on the adsorption properties of PEO-based amphiphiles, beginning with a discussion of fundamental concepts pertaining to the adsorption of macromolecules on solid-liquid interfaces, and more specifically the adsorption of PEO homopolymers. The main portion of the review highlights studies on factors affecting the adsorption and surface self-assembly of PEO-PPO-PEO block copolymers, where PPO is poly(propylene oxide). Block copolymers of this type are commercially available and of interest in several fields, due to their low toxicity and compatibility in aqueous systems. Examples of applications relevant to the interfacial behavior of PEO-PPO-PEO block copolymers are paints and coatings, detergents, filtration, and drug delivery. The methods discussed herein for manipulating the adsorption properties of PEO-PPO-PEO are emphasized for their ability to shed light on molecular interactions at interfaces. Knowledge of these interactions guides the formulation of novel materials with useful mesoscale organization and micro- and macrophase properties.

Mesostructure of Mesoporous Silica/Anodic Alumina Hierarchical Membranes Tuned with Ethanol

Hierarchically structured membranes composed of mesoporous silica embedded inside the channels of anodic alumina (MS-AAM) were synthesized using the aspiration method. Ethanol is shown to have a significant effect on the type and organization of the mesoporous silica phase. Detailed textural analysis revealed that the pore size distribution of the mesoporous silica narrows and the degree of ordering increases with decreasing ethanol concentration used in the synthesis mixture. The silica mesopores were synthesized with pores as small as 6 nm in diameter, with the channel direction oriented in lamellar, circular, and columnar directions depending on the ethanol content. This study reveals ethanol concentration as a key factor behind the synthesis of an ordered mesoporous silica-anodic alumina membrane that can increase its functionality for membrane-based applications.

Synergistic enhancement in the drug sequestration power and reduction in the cytotoxicity of surfactants

Surfactants in supramolecular assemblies show a significant increase in their drug sequestration power with a remarkably reduced cytotoxicity.

Interaction between bile salt sodium glycodeoxycholate and PEO–PPO–PEO triblock copolymers in aqueous solution

Bile salts can associate to PEO–PPO–PEO block copolymer micelles and disintegrate them depending on the relative block length and molecular weight of the copolymers and bile salt/copolymer molar ratio.

Effects of Bile Salt Sodium Glycodeoxycholate on the Self-Assembly of PEO-PPO-PEO Triblock Copolymer P123 in Aqueous Solution

A comprehensive experimental study on the interaction between the PEO-PPO-PEO block copolymer P123 (EO20PO68EO20) and the anionic bile salt sodium glycodeoxycholate (NaGDC) in water has been performed. The work was aimed at investigating the suitability of using P123 as bile salt sequestrant beside the fundamental aspects of PEO-PPO-PEO block copolymer-bile salt interactions. Various experimental techniques including dynamic and static light scattering, small-angle X-ray scattering, and differential scanning calorimetry (DSC) were employed in combination with electrophoretic mobility measurements. The system was investigated at a constant P123 concentration of 1.74 mM and with varying bile salt concentrations up to approximately 250 mM NaGDC (or a molar ratio n(NaGDC)/n(P123) = 144). In the mixed P123-NaGDC solutions, the endothermic process related to the self-assembly of P123 was observed to gradually decrease in enthalpy and shift to higher temperatures upon progressive addition of NaGDC. To explain this effect, the formation of NaGDC micelles carrying partly dehydrated P123 unimers was proposed and translated into a stoichiometric model, which was able to fit the experimental DSC data. In the mixtures at low molar ratios, NaGDC monomers associated with the P123 micelle forming a charged "P123 micelle-NaGDC" complex with a dehydrated PPO core. These complexes disintegrated upon increasing NaGDC concentration to form small "NaGDC-P123" complexes visualized as bile salt micelles including one or a few P123 copolymer chains.