Models of High-Valent Heme Protein Intermediates: A Quantum Chemical Study of Iron(IV) Porphyrins with Two Univalent Axial π-Bonding Ligands

Photocatalytic Oxygenation of Substrates by Dioxygen with Protonated Manganese(III) Corrolazine

UV-vis spectral titrations of a manganese(III) corrolazine complex [Mn(III)(TBP8Cz)] with HOTf in benzonitrile (PhCN) indicate mono- and diprotonation of Mn(III)(TBP8Cz) to give Mn(III)(OTf)(TBP8Cz(H)) and [Mn(III)(OTf)(H2O)(TBP8Cz(H)2)][OTf] with protonation constants of 9.0 × 10(6) and 4.7 × 10(3) M(-1), respectively. The protonated sites of Mn(III)(OTf)(TBP8Cz(H)) and [Mn(III)(OTf)(H2O)(TBP8Cz(H)2)][OTf] were identified by X-ray crystal structures of the mono- and diprotonated complexes. In the presence of HOTf, the monoprotonated manganese(III) corrolazine complex [Mn(III)(OTf)(TBP8Cz(H))] acts as an efficient photocatalytic catalyst for the oxidation of hexamethylbenzene and thioanisole by O2 to the corresponding alcohol and sulfoxide with 563 and 902 TON, respectively. Femtosecond laser flash photolysis measurements of Mn(III)(OTf)(TBP8Cz(H)) and [Mn(III)(OTf)(H2O)(TBP8Cz(H)2)][OTf] in the presence of O2 revealed the formation of a tripquintet excited state, which was rapidly converted to a tripseptet excited state. The tripseptet excited state of Mn(III)(OTf)(TBP8Cz(H)) reacted with O2 with a diffusion-limited rate constant to produce the putative Mn(IV)(O2(•-))(OTf)(TBP8Cz(H)), whereas the tripseptet excited state of [Mn(III)(OTf)(H2O)(TBP8Cz(H)2)][OTf] exhibited no reactivity toward O2. In the presence of HOTf, Mn(V)(O)(TBP8Cz) can oxidize not only HMB but also mesitylene to the corresponding alcohols, accompanied by regeneration of Mn(III)(OTf)(TBP8Cz(H)). This thermal reaction was examined for a kinetic isotope effect, and essentially no KIE (1.1) was observed for the oxidation of mesitylene-d12, suggesting a proton-coupled electron transfer (PCET) mechanism is operative in this case. Thus, the monoprotonated manganese(III) corrolazine complex, Mn(III)(OTf)(TBP8Cz(H)), acts as an efficient photocatalyst for the oxidation of HMB by O2 to the alcohol.

Catalytic two-electron reduction of dioxygen by ferrocene derivatives with manganese(V) corroles

Electron transfer from octamethylferrocene (Me8Fc) to the manganese(V) imidocorrole complex (tpfc)Mn(V)(NAr) [tpfc = 5,10,15-tris(pentafluorophenyl)corrole; Ar = 2,6-Cl2C6H3] proceeds efficiently to give an octamethylferrocenium ion (Me8Fc(+)) and [(tpfc)Mn(IV)(NAr)](-) in acetonitrile (MeCN) at 298 K. Upon the addition of trifluoroacetic acid (TFA), further reduction of [(tpfc)Mn(IV)(NAr)](-) by Me8Fc gives (tpfc)Mn(III) and ArNH2 in deaerated MeCN. TFA also results in hydrolysis of (tpfc)Mn(V)(NAr) with residual water to produce a protonated manganese(V) oxocorrole complex ([(tpfc)Mn(V)(OH)](+)) in deaerated MeCN. [(tpfc)Mn(V)(OH)](+) is rapidly reduced by 2 equiv of Me8Fc in the presence of TFA to give (tpfc)Mn(III) in deaerated MeCN. In the presence of dioxygen (O2), (tpfc)Mn(III) catalyzes the two-electron reduction of O2 by Me8Fc with TFA in MeCN to produce H2O2 and Me8Fc(+). The rate of formation of Me8Fc(+) in the catalytic reduction of O2 follows zeroth-order kinetics with respect to the concentrations of Me8Fc and TFA, whereas the rate increases linearly with increasing concentrations of (tpfc)Mn(V)(NAr) and O2. These kinetic dependencies are consistent with the rate-determining step being electron transfer from (tpfc)Mn(III) to O2, followed by further proton-coupled electron transfer from Me8Fc to produce H2O2 and [(tpfc)Mn(IV)](+). Rapid electron transfer from Me8Fc to [(tpfc)Mn(IV)](+) regenerates (tpfc)Mn(III), completing the catalytic cycle. Thus, catalytic two-electron reduction of O2 by Me8Fc with (tpfc)Mn(V)(NAr) as a catalyst precursor proceeds via a Mn(III)/Mn(IV) redox cycle.

Electrochemical evidence of intramolecular electronic communication in Zr and Hf phthalocyanines bearing ferrocene-containing β-diketonato axial ligands: structure of [PcHf(FcCOCHCOC6H5)2]

The series of zirconium(IV) and hafnium(IV) phthalocyanine complexes [PcM(FcCOCHCOR)2] (Pc = phthalocyaninato; M = Zr; R = CF3 (1), CH3 (2), C6H5 (3), Fc ((C5H5)Fe(C5H4), 4), as well as M = Hf ; R = CF3 (5), CH3 (6), C6H5 (7), and Fc (8)) were synthesized. A single-crystal X-ray diffraction analysis of the structure of [PcHf(FcCOCHCOC6H5)2], 7 (Z = 2, space group P1), showed the two axial β-diketonato ligands were orientated in such a way that the ferrocenyl groups were positioned diagonally opposite each other. From the structural determination of 7 it was clear that these complexes have a distorted D4h symmetry at the coordination site of the metal centers, which explains a splitting of the UV-vis Q band into Qx and Qy components with 3 ≤ Δλ(max,Q) ≤ 10 nm. Cyclic and square wave voltammetric studies in CH2Cl2/[N((n)Bu)4][B(C6F5)4] allowed observation of at least three phthalocyaninato macrocycle-based redox couples as well as all (i.e., two or four) well-resolved ferrocenyl couples in 1-8. For M = Zr and R = Fc, formal reduction potentials of the four ferrocenyl groups were found to be E°' = 296, 386, 538, and 687 mV versus free ferrocene. Spectroelectrochemical evidence, UV-vis Q-band maximum wavelengths, and HOMO-LUMO energy gaps as expressed by ΔE°'I-III = ΔE°'wave I - ΔE°'wave III were mutually consistent, indicating that the first phthalocyaninato ring-based oxidation occurs before ferrocenyl oxidations take place. The potential for each redox process was found to be dependent on the sum of β-diketonato R-group group electronegativities, ΣχR. Mathematical relationships for the dependency of E°' on ΣχR for all four observed ring-based redox processes as well as for the ferrocenyl-based redox processes were determined. This allowed prediction of potentials for redox processes that fall outside the workable potential window of the solvent. No significant differences were found between the corresponding redox potentials of zirconium and hafnium analogues bearing the same axial ligands.

Mechanistic Studies on Peroxide Activation by a Water-Soluble Iron(III)–Porphyrin: Implications for OO Bond Activation in Aqueous and Nonaqueous Solvents

The reactions of a water-soluble iron(III)-porphyrin, [meso-tetrakis(sulfonatomesityl)porphyrinato]iron(III), [Fe(III)(tmps)] (1), with m-chloroperoxybenzoic acid (mCPBA), iodosylbenzene (PhIO), and H(2)O(2) at different pH values in aqueous methanol solutions at -35 degrees C have been studied by using stopped-flow UV/Vis spectroscopy. The nature of the porphyrin product resulting from the reactions with all three oxidants changed from the oxo-iron(IV)-porphyrin pi-cation radical [Fe(IV)(tmps(*+))(O)] (1(++)) at pH<5.5 to the oxo-iron(IV)-porphyrin [Fe(IV)(tmps)(O)] (1(+)) at pH>7.5, whereas a mixture of both species was formed in the intermediate pH range of 5.5-7.5. The observed reactivity pattern correlates with the E degrees' versus pH profile reported for 1, which reflects pH-dependent changes in the relative positions of E degrees'(Fe(IV)/Fe(III) ) and E degrees'(P(*+)/P) for metal- and porphyrin-centered oxidation, respectively. On this basis, the pH-dependent redox equilibria involving 1(++) and 1(+) are suggested to determine the nature of the final products that result from the oxidation of 1 at a given pH. The conclusions reached are extended to water-insoluble iron(III)-porphyrins on the basis of literature data concerning the electrochemical and catalytic properties of [Fe(III)(P)(X)] species in nonaqueous solvents. Implications for mechanistic studies on [Fe(P)]-catalyzed oxidation reactions are briefly addressed.

Spectroscopic description of an unusual protonated ferryl species in the catalase from Proteus mirabilis and density functional theory calculations on related models. Consequences for the ferryl protonation state in catalase, peroxidase and chloroperoxidase

The catalase from Proteus mirabilis peroxide-resistant bacteria is one of the most efficient heme-containing catalases. It forms a relatively stable compound II. We were able to prepare samples of compound II from P. mirabilis catalase enriched in (57)Fe and to study them by spectroscopic methods. Two different forms of compound II, namely, low-pH compound II (LpH II) and high-pH compound II (HpH II), have been characterized by Mössbauer, extended X-ray absorption fine structure (EXAFS) and UV-vis absorption spectroscopies. The proportions of the two forms are pH-dependent and the pH conversion between HpH II and LpH II is irreversible. Considering (1) the Mössbauer parameters evaluated for four related models by density functional theory methods, (2) the existence of two different Fe-O(ferryl) bond lengths (1.80 and 1.66 A) compatible with our EXAFS data and (3) the pH dependence of the alpha band to beta band intensity ratio in the absorption spectra, we attribute the LpH II compound to a protonated ferryl Fe(IV)-OH complex (Fe-O approximately 1.80 A), whereas the HpH II compound corresponds to the classic ferryl Fe(IV)=O complex (Fe=O approximately 1.66 A). The large quadrupole splitting value of LpH II (measured 2.29 mm s(-1) vs. computed 2.15 mm s(-1)) compared with that of HpH II (measured 1.47 mm s(-1) vs. computed 1.46 mm s(-1)) reflects the protonation of the ferryl group. The relevancy and involvement of such (Fe(IV)=O/Fe(IV)-OH) species in the reactivity of catalase, peroxidase and chloroperoxidase are discussed.

Mössbauer identification of a protonated ferryl species in catalase from Proteus mirabilis: Density functional calculations on related models

The Proteus mirabilis catalase is one of the most efficient heme-containing catalase and forms a relatively stable compound II. Samples of compound II were prepared from PMC enriched in (57)Fe. For the first time, two different forms of compound II, namely low pH compound II (LpH II) (43%) and high pH compound II (HpH II) (25%), have been characterized by Mössbauer spectroscopy at pH 8.3. The ratio LpH II/HpH II increases irreversibly with decreasing pH. The large quadrupole splitting value of LpH II (DeltaE(Q)=2.29 (2) mm/s, with delta(/Fe)=0.03 (2) mm/s), compared to that of HpH II (DeltaE(Q)=1.47 (2) mm/s, with delta(/Fe)=0.07 (2) mm/s), reflects the protonation of the ferryl group. Quadrupole splitting values of 1.46 and 2.15mm/s have been computed by DFT for optimized models of the ferryl compound II (model 1) and the protonated ferryl compound II (model 2), respectively, starting from the Fe(IV)O model initially published by Rovira and Fita [C. Rovira, I. Fita, J. Phys. Chem. B 107 (2003) 5300-5305]. Therefore, we attribute the LpH II compound to a protonated ferryl Fe(IV)-OH complex, whereas the HpH II compound corresponds to the classical ferryl Fe(IV)O complex.

Electrochemical generation of a high-valent state of cytochrome P450

Cyclic voltammetry performed at rapid scan rates on cytochrome P450 from Pseudomonas putida (P450CAM) in didodecyldimethylammonium bromide (DDAB) films on graphite electrodes revealed a couple (E) at 830mV (vs Ag/AgCl). E was not significantly observed at scan rates less than 30V/s at room temperature, suggesting that the oxidized species is unstable. The lifetime of E could be prolonged at 4 degrees C, which allowed reversible access to E at scan rates as low as 1V/s. E was found to be sensitive to imidazole in solution and to variations in pH, suggesting that the redox reaction is occurring at the metal center (i.e., Fe(IV/III)). Electrolysis reactions with different P450 substrates revealed that the electrochemically generated high-valent species is able to convert thioanisole to methyl phenyl sulfoxide.

Trigonal bipyramidal iron(III) and manganese(III) oxo, sulfido, and selenido complexes. An electronic-structural overview

Using density functional theory calculations, we have carried out a broad survey of trigonal bipyramidal iron(III) and manganese(III) oxo, sulfido, selenido, and hydroxo complexes, with tripodal tetradentate "triureidoamine" supporting ligands. The calculations reproduce the experimentally observed high-spin states of these compounds; a multifunctional analysis suggests that the high-spin nature of these species follows largely from their trigonal bipyramidal geometry. In conjunction with earlier calculations, the present study provides a broad overview of spin density profiles in iron-oxo species in general. Iron-oxo d(pi)-p(pi) interactions invariably result in a substantial spin density on the oxygen, which in turn may be significantly tuned by hydrogen bonding interactions. The oxygen spin densities are smaller in analogous manganese-oxo species, indicating that manganese is less adept at pi-bonding than iron, which parallels earlier findings on porphyrin systems. The Fe(III)-S/Se spin density profiles provide one of the first confirmations in a transition metal context of Schleyer's prediction that the heavier p-block elements are as effective as their second-row congeners in terms of their pi-donating ability.

Structures of the high-valent metal-ion haem–oxygen intermediates in peroxidases, oxygenases and catalases

Peroxidases, oxygenases and catalases have similar high-valent metal-ion intermediates in their respective reaction cycles. In this review, haem-based examples will be discussed. The intermediates of the haem-containing enzymes have been extensively studied for many years by different spectroscopic methods like UV-Vis, EPR (electron paramagnetic resonance), resonance Raman, Mössbauer and MCD (magnetic circular dichroism). The first crystal structure of one of these high-valent intermediates was on cytochrome c peroxidase in 1987. Since then, structures have appeared for catalases in 1996, 2002, 2003, putatively for cytochrome P450 in 2000, for myoglobin in 2002, for horseradish peroxidase in 2002 and for cytochrome c peroxidase again in 1994 and 2003. This review will focus on the most recent structural investigations for the different intermediates of these proteins. The structures of these intermediates will also be viewed in light of quantum mechanical (QM) calculations on haem models. In particular quantum refinement, which is a combination of QM calculations and crystallography, will be discussed. Only small structural changes accompany the generation of these intermediates. The crystal structures show that the compound I state, with a so called pi-cation radical on the haem group, has a relatively short iron-oxygen bond (1.67-1.76A) in agreement with a double-bond character, while the compound II state or the compound I state with a radical on an amino acid residue have a relatively long iron-oxygen bond (1.86-1.92A) in agreement with a single-bond character where the oxygen-atom is protonated.

Resonance Raman spectroscopy of oxoiron(IV) porphyrin π-cation radical and oxoiron(IV) hemes in peroxidase intermediates

The catalytic cycle intermediates of heme peroxidases, known as compounds I and II, have been of long standing interest as models for intermediates of heme proteins, such as the terminal oxidases and cytochrome P450 enzymes, and for non-heme iron enzymes as well. Reports of resonance Raman signals for compound I intermediates of the oxo-iron(IV) porphyrin pi-cation radical type have been sometimes contradictory due to complications arising from photolability, causing compound I signals to appear similar to those of compound II or other forms. However, studies of synthetic systems indicated that protein based compound I intermediates of the oxoiron(IV) porphyrin pi-cation radical type should exhibit vibrational signatures that are different from the non-radical forms. The compound I intermediates of horseradish peroxidase (HRP), and chloroperoxidase (CPO) from Caldariomyces fumago do in fact exhibit unique and characteristic vibrational spectra. The nature of the putative oxoiron(IV) bond in peroxidase intermediates has been under discussion in the recent literature, with suggestions that the Fe(IV)O unit might be better described as Fe(IV)-OH. The generally low Fe(IV)O stretching frequencies observed for proteins have been difficult to mimic in synthetic ferryl porphyrins via electron donation from trans axial ligands alone. Resonance Raman studies of iron-oxygen vibrations within protein species that are sensitive to pH, deuteration, and solvent oxygen exchange, indicate that hydrogen bonding to the oxoiron(IV) group within the protein environment contributes to substantial lowering of Fe(IV)O frequencies relative to those of synthetic model compounds.

Electronic ménages a trois: a molecular orbital perspective of protonated ferryl intermediates and synthetic models

Presented here is a molecular orbital perspective of various S=1 iron(IV)-hydroxo compound II intermediates as well as of synthetic heme and nonheme analogues. A key conceptual issue concerns how the iron(IV) center in these species coexists with highly reducing alkoxide, thiolate, phenolate, and hydroperoxide ligands. We suggest that a clue to this conundrum involves a three-way splitting of the spin density among the iron and two pi-basic ligands, which effectively delocalizes the high positive charge away from the iron.

Structure and Bonding in Monomeric Iron(III) Complexes with Terminal Oxo and Hydroxo Ligands

We report on the structure and bonding in the title iron(III) complexes, containing the tris[(N'-tert-butylureayl)-N-ethyl]amine ligand, with density functional theory techniques. In agreement with the experimental data, a high-spin electronic state is favored for all of the systems we considered. H bonds between the terminal oxo and hydroxo ligands and NH groups present in the organic ligand coordinated to the metal have a remarkable effect on the overall coordination geometry. In fact, the structure of model complexes without H bonds shows shorter Fe-O bond lengths. This is a consequence of the ability of the H bonds to stabilize a remarkable amount of electron density localized on the terminal oxo and hydroxo ligands. Energy analysis indicates that each H bond stabilizes the nonheme complexes by roughly 35 kJ/mol. Molecular orbital analysis indicates a reduction of two Fe-O bonding electrons on going from a complex with a terminal oxo ligand to a complex with a terminal hydroxo ligand. This reduction in the number of bonding electrons is also supported by frequency analysis.

High-Frequency and -Field EPR Investigation of a Manganese(III) N-Confused Porphyrin Complex, [Mn(NCTPP)(py)2]

We report the first high-frequency and -field electron paramagnetic resonance (HFEPR) study of a Mn(III) N-confused porphyrin (NCP) complex (NCP is also known as inverted porphyrin or 2-aza-21-carbaporphyrin). We have found a striking variation in the electronic properties of the S = 2 Mn(III) ion coordinated by NCP compared to other Mn(III) porphyrinoid complexes. Thus, inversion of a single pyrrole ring greatly changes the equatorial ligand field exerted and leads to large magnitudes of both the axial and rhombic zero-field splitting [respectively, D = -3.084(3) cm(-1), E = -0.608(3) cm(-1)], which are unprecedented in other Mn(III) porphyrinoids.

The nature of the high-valent complexes in the catalytic cycles of hemoproteins

We report geometry optimization results on heme compound I (ferryl-oxo + porphyrin cation radical), compound II (ferryl-oxo) and ferric-hydroxo species with thiolate or imidazole axial ligands. We also examine protonated forms of compound I and compound II species, prompted by recent reports that, in at least two different hemoproteins, compound II may in fact contain a hydroxo rather than an oxo ligand. We propose that the stable compound I and compound II species of hemoproteins (e.g., peroxidases and myoglobin) most likely contain a hydroxo rather than the oxo ligand traditionally assumed, whereas the extremely transient compound I species of monooxygenase hemoproteins (P450) would contain an oxo atom. We show evidence impacting the previously accepted notion in hemoprotein computational chemistry that non-covalent interactions and medium polarization effects are essential in properly describing the electronic structure of heme-thiolate high-valent complexes. On a different note, we find that the charge density on the iron remains essentially the same throughout the catalytic cycles of heme-containing oxygenases and peroxidases, despite clear changes in bond lengths and spin densities suggestive of various iron oxidation states. The iron thus appears to simply relay the electron flux between the porphyrin and the axial dioxygen/superoxo/peroxo/oxo/hydroxo ligands.