Comprehensive DFT Study of Nitrous Oxide Decomposition over Fe-ZSM-5†

A DFT study on N2O oxidation and methanol synthesis over Bi4O6: single-site catalytic model of α-Bi2Mo3O12

Catalytic conversion of methane to methanol is one of the most promising processes for effective natural gas resource utilization. In this work, Bi₄O₆-catalyzed oxidation of methane to methanol with N₂O as an oxidizing reactant has been investigated by DFT calculation. For the overall reaction mechanism of three N₂O molecules on Bi₄O₆ catalyst, two catalytic cycles were proposed. Cycle 1 involved the consecutive decomposition of the first two N₂O molecules. Cycle 2 corresponded to the decomposition of the third N₂O molecule. The activation barriers of the first and second N₂O decomposition were computed to be 27.6 and 35.0 kcal/mol, respectively. The third N₂O decomposition in cycle 2 required 36.1 kcal/mol activation barriers. Thus, cycle 1 was the main catalytic cycle for N₂O as the cycle required lower in barriers than those of the other. Oxidation of methane to methanol on Bi₄O₇ and Bi₄O₈ catalysts was supposed to be a two-step mechanism consisting of H₃C-H bond breaking and CH₃-OH formation. The activation energies of the two steps were 32.7, 41.1, and 21.6, 17.2 kcal/mol for Bi₄O₇ and Bi₄O₈, respectively. Thus, methane oxidation over Bi₄O₈ was found to be more energetically favorable than those of Bi₄O₇, in which C-H bond breaking is the RDS. The present catalyst could be a promising material for the oxidation of methane to methanol. In summary, the single-site catalytic model study would be beneficial for guiding and searching for potential catalysts in heterogeneously catalyzed N₂O decomposition and methanol synthesis as green as possible. However, theoretical investigation of this kind of catalyst's extended model system must be taken into account.

K T, Ismail TM, Sajith PK. Theoretical investigation into the effect of water on the N2O decomposition reaction over Cu-ZSM-5 catalyst

Copper exchanged zeolites are an admirable catalyst for the direct decomposition reaction of harmful N2O gas. However, the inhibition of the decomposition reaction in the presence of water vapor greatly...

Synergic effects between boron and nitrogen atoms in BN-codoped C59-n BN n fullerenes (n = 1-3) for metal-free reduction of greenhouse N2O gas

The geometries, electronic structures, and catalytic properties of BN-codoped fullerenes C_59−nBN_n (n = 1–3) are studied using first-principles computations. The results showed that BN-codoping can significantly modify the properties of C₆₀ fullerene by breaking local charge neutrality and creating active sites. The codoping of B and N enhances the formation energy of fullerenes, indicating that the synergistic effects of these atoms helps to stabilize the C_59−nBN_n structures. The stepwise addition of N atoms around the B atom improves catalytic activities of C_59−nBN_n in N₂O reduction. The reduction of N₂O over C₅₈BN and C₅₇BN₂ begins with its chemisorption on the B–C bond of the fullerene, followed by the concerted interaction of CO with N₂O and the release of N₂. The resulting OCO intermediate is subsequently transformed into a CO₂ molecule, which is weakly adsorbed on the B atom of the fullerene. On the contrary, nitrogen-rich C₅₆BN₃ fullerene is found to decompose N₂O into N₂ and O* species without the requirement for activation energy. The CO molecule then removes the O* species with a low activation barrier. The activation barrier of the N₂O reduction on C₅₆BN₃ fullerene is just 0.28 eV, which is lower than that of noble metals.

The synergic effects between B and N atoms make C₅₇BN₂ and C₅₆BN₃ highly active catalysts for reduction of greenhouse N₂O gas.

Structural Studies of Aluminated form of Zeolites-EXAFS and XRD Experiment, STEM Micrography, and DFT Modelling

In this article, the results of computational structural studies on Al-containing zeolites, via periodic DFT + D modelling and FDM (Finite Difference Method) to solve the Schrödinger equation (FDMNES) for XAS simulations, corroborated by EXAFS (Extended X-ray Absorption Fine Structure) spectroscopy and PXRD (powder X-ray diffractometry), are presented. The applicability of Radial Distribution Function (RDF) to screen out the postulated zeolite structure is also discussed. The structural conclusions are further verified by HR-TEM imaging.

Side-on Coordination in Isostructural Nitrous Oxide and Carbon Dioxide Complexes of Nickel

A nickel complex incorporating an N₂ O ligand with a rare η² -N,N'-coordination mode was isolated and characterized by X-ray crystallography, as well as by IR and solid-state NMR spectroscopy augmented by ¹⁵ N-labeling experiments. The isoelectronic nickel CO₂ complex reported for comparison features a very similar solid-state structure. Computational studies revealed that η² -N₂ O binds to nickel slightly stronger than η² -CO₂ in this case, and comparably to or slightly stronger than η² -CO₂ to transition metals in general. Comparable transition-state energies for the formation of isomeric η² -N,N'- and η² -N,O-complexes, and a negligible activation barrier for the decomposition of the latter likely account for the limited stability of the N₂ O complex.

Kinetic modeling of nitrous oxide decomposition on Fe-ZSM-5 in the presence of nitric oxide based on parameters obtained from first-principles calculations

A variety of experiments for the N₂O decomposition over Fe-ZSM-5 catalysts have been simulated in the presence and absence of small amounts of nitric oxide and water vapor.

Environmental Reactions of Air-Quality Protection on Eco-Friendly Iron-Based Catalysts

A series of iron functionalized hydroxyapatite (Fe/HAP) samples with different metal loading (2 < wt.% Fe < 13) was prepared by a flash ionic exchange procedure from iron(III) nitrate as precursor and tested in some environmental air-quality protection reactions such as the catalytic reduction of NOx by NH3 (NH3-SCR), catalytic oxidation of NH3 (NH3-SCO) and catalytic N2O decomposition. The catalytic performances of the Fe/HAP catalysts were determined under flow conditions as a function of temperature and using reactant concentrations typical of polluting gaseous emissions from industrial vents. Physico-chemical characterization with various techniques of study (UV-DR and Mössbauer spectroscopies, NH3 titration, N2-physisorption, and XRPD analyses) provided valuable information on Fe-speciation, acidity, morphology, and structure of the samples. In general, highly dispersed Fe3+ centers were the predominant species, irrespective of Fe-loading, while just low percentage (≤15%) of FexOy nanoclusters (2 < size/nm < 4) was detected on the samples. As expected, the differences in iron concentration produced a diversified effect of both catalyst properties and catalytic activity, comprising the conversion and selectivity profiles, different for each reaction considered. The obtained results indicate a good potentiality for the eco-friendly Fe-catalysts for some environmental reactions of air protection.

Dehydrogenation of ethanol to acetaldehyde with nitrous oxide over the metal-organic framework NU-1000: a density functional theory study

The conversion of ethanol to more valuable hydrocarbon compounds receives great attention in chemical industries because it could diminish the dependency on petroleum as raw material. We investigate the catalytic performance of Fe-supported MOF NU-1000 for the dehydrogenation of ethanol to acetaldehyde with nitrous oxide (N2O) by deriving the relevant reaction profiles with density functional theory calculations. In the proposed mechanism, the activation barrier of the rate-determining step is almost four times lower in the presence of N2O than without it. The supported NU-1000 framework plays also important role since it facilitates electron transfers and stabilizes all species along the reaction coordinate. When considering the catalytic activity of tetravalent metal centers (Zr, Hf and Ti) substituted into NU-1000 it is found that their activity decreases in the order Hf ≥ Zr > Ti, based on activation energies and turnover frequencies (TOF). Concerning MOF linkers, we show that the catalytic activity is not further improved by functionalizing NU-1000 with either electron-donating or electron-withdrawing organic groups.

Thermodynamics of Water-Cationic Species-Framework Guest-Host Interactions within Transition Metal Ion-Exchanged Mordenite Relevant to Selective Anaerobic Oxidation of Methane to Methanol

Low-temperature anaerobic methane conversion to methanol (MTM) using copper ion-exchanged mordenite (Cu-MOR) as the catalyst and water as the sole source of oxygen is promising for sustainable utilization of methane. Integrating in situ calorimetric, spectroscopic, and structural methodologies, we report a systematic study on energetics of water-cationic species-framework guest-host interactions as a function of water loading for several mordenites relevant to low-temperature MTM. Notably, the near-zero coverage hydration enthalpy on Cu-MOR is -133.1 ± 6.0 kJ/mol water, which is related to Cu-MOR regeneration using water as oxidant. The copper oxo sites are thermally stable up to 915 °C and remain chemically intact as an oxygen source after complete hydration and dehydration. This study underscores the importance of manipulating the oxidation state and coordination chemistry of transition metal guest species in zeolites by fine-tuning the partial pressure of water as a strategy for rational design, synthesis, and modification of catalysts.

DFT Study on the Catalytic Activity of ALD-Grown Diiron Oxide Nanoclusters for Partial Oxidation of Methane to Methanol

Using density functional theory (DFT), we studied the catalytic activity of iron oxide nanoclusters that mimic the structure of the active site in the soluble form of methane monooxygenase (sMMO) for the partial oxidation of methane to methanol. Using N₂O as the oxidant, we consider a radical-rebound mechanism and a concerted mechanism for the oxidation of methane on either a bridging oxygen (O_b) or a terminal oxygen (O_t) active site. We find that the radical-rebound pathway is preferred over the concerted pathway by 40-50 kJ/mol, but the desorption of methanol and the regeneration of the oxygen site are found to be the highest barriers for the direct conversion of methane to methanol with these catalysts. As demonstrated by a population analysis, the O_x (x = b or t) site behaves as an oxygen radical during the H abstraction, and the [Fe⁺-O_x^-] site behaves as a Lewis acid-base pair during the concerted C-H cleavage. Molecular orbital decomposition analysis further demonstrates electron transfer during the oxidation and reduction steps of the reaction. High-level multireference calculations were also carried out to further assess the DFT results. Understanding how these systems behave during the proposed reaction pathways provides new insights into how they can be tuned for methane partial oxidation.

Effect of Water Molecule on Photo-Assisted Nitrous Oxide Decomposition over Oxotitanium Porphyrin: A Theoretical Study

Water vapor has generally been recognized as an inhibitor of catalysts in nitrous oxide (N2O) decomposition because it limits the lifetime of catalytic reactors. Oxygen produced in reactions also deactivates the catalytic performance of bulk surface catalysts. Herein, we propose a potential catalyst that is tolerant of water and oxygen in the process of N2O decomposition. By applying density functional theory calculations, we investigated the reaction mechanism of N2O decomposition into N2 and O2 catalyzed by oxotitanium(IV) porphyrin (TiO-por) with interfacially bonded water. The activation energies of reaction Path A and B are compared under thermal and photo-assisted conditions. The obtained calculation results show that the photo-assisted reaction in Path B is highly exothermic and proceeds smoothly with the low activation barrier of 27.57 kcal/mol at the rate determining step. The produced O2 is easily desorbed from the surface of the catalyst, requiring only 4.96 kcal/mol, indicating the suppression of catalyst deactivation. Therefore, TiO-por is theoretically proved to have the potential to be a desirable catalyst for N2O decomposition with photo-irradiation because of its low activation barrier, water resistance, and ease of regeneration.

Side-On Coordination of Nitrous Oxide to a Mononuclear Cobalt Center

Despite its utility as an oxygen-atom transfer reagent for transition metals, nitrous oxide (N₂O) is a notoriously poor ligand, and its coordination chemistry has been limited to a few terminal, end-on κ¹-N complexes. Here, the synthesis of a mononuclear cobalt complex possessing a side-on-bound N₂O molecule is reported. Structural characterization, IR spectroscopy, and DFT calculations support an η²-N,N binding mode for binding of N₂O to the cobalt center.

Cobalt Species Active for Nitrous Oxide (N2O) Decomposition within a Temperature Range of 300–600°C

This article presents a novel study of the role of the catalyst support towards the formation of active cobalt sites for N2O conversion reactions within a temperature range of 300–600°C. These reactions were examined in a fixed bed tubular reactor. ZSM-5 (Si/ Al = 15), TS-1, and amorphous silicates were used as catalyst supports for cobalt loadings. All catalysts were prepared by following standard methods and recipes. In general, cobalt loading on supports was varied between 0.78 and 5.40 wt.-% (as determined from inductively coupled plasma (ICP) analysis). ICP, temperature programmed desorption, X-ray diffraction, and N2 adsorption/desorption isotherms were used for the characterization of prepared catalysts. Cobalt on ZSM-5 support generates weak and strong acid sites. Furthermore, for the Co-ZSM-5 catalyst, prepared by a wet deposition method, the N2O decomposition reaction is first order with an activation energy of ~132 kJ mol−1. Co2+ and Co3+ are the suggested active species for the N2O conversions in the studied range of temperatures.

Ethylene Epoxidation with Nitrous Oxide over Fe-BTC Metal-Organic Frameworks: A DFT Study

The epoxidation of ethylene with N₂ O over the metal-organic framework Fe-BTC (BTC=1,3,5-benzentricarboxylate) is investigated by means of density functional calculations. Two reaction paths for the production of ethylene oxide or acetaldehyde are systematically considered in order to assess the efficiency of Fe-BTC for the selective formation of ethylene oxide. The reaction starts with the decomposition of N₂ O to form an active surface oxygen atom on the Fe site of Fe-BTC, which subsequently reacts with an ethylene molecule to form an ethyleneoxy intermediate. This intermediate can then be selectively transformed either by 1,2-hydride shift into the undesired product acetaldehyde or into the desired product ethylene oxide by way of ring closure of the intermediate. The production of ethylene oxide requires an activation energy of 5.1 kcal mol^-1 , which is only about one-third of the activation energy of acetaldehyde formation (14.3 kcal mol^-1 ). The predicted reaction rate constants for the formation of ethylene oxide in the relevant temperature range are approximately 2-4 orders of magnitude higher than those for acetaldehyde. Altogether, the results suggest that Fe-BTC is a good candidate catalyst for the epoxidation of ethylene by molecular N₂ O.

Selective Transformation of Various Nitrogen-Containing Exhaust Gases toward N2 over Zeolite Catalysts

In this review we focus on the catalytic removal of a series of N-containing exhaust gases with various valences, including nitriles (HCN, CH3CN, and C2H3CN), ammonia (NH3), nitrous oxide (N2O), and nitric oxides (NO(x)), which can cause some serious environmental problems, such as acid rain, haze weather, global warming, and even death. The zeolite catalysts with high internal surface areas, uniform pore systems, considerable ion-exchange capabilities, and satisfactory thermal stabilities are herein addressed for the corresponding depollution processes. The sources and toxicities of these pollutants are introduced. The important physicochemical properties of zeolite catalysts, including shape selectivity, surface area, acidity, and redox ability, are described in detail. The catalytic combustion of nitriles and ammonia, the direct catalytic decomposition of N2O, and the selective catalytic reduction and direct catalytic decomposition of NO are systematically discussed, involving the catalytic behaviors as well as mechanism studies based on spectroscopic and kinetic approaches and molecular simulations. Finally, concluding remarks and perspectives are given. In the present work, emphasis is placed on the structure-performance relationship with an aim to design an ideal zeolite-based catalyst for the effective elimination of harmful N-containing compounds.

Spin-resolved NOCV analysis of the zeolite framework influence on the interaction of NO with Cu(i/ii) sites in zeolites

In the present work the function of a zeolite framework in modifying the properties of copper sites interacting with NO has been studied.

Metal-porphyrin: a potential catalyst for direct decomposition of N(2)O by theoretical reaction mechanism investigation

The adsorption of nitrous oxide (N2O) on metal-porphyrins (metal: Ti, Cr, Fe, Co, Ni, Cu, or Zn) has been theoretically investigated using density functional theory with the M06L functional to explore their use as potential catalysts for the direct decomposition of N2O. Among these metal-porphyrins, Ti-porphyrin is the most active for N2O adsorption in the triplet ground state with the strongest adsorption energy (-13.32 kcal/mol). Ti-porphyrin was then assessed for the direct decomposition of N2O. For the overall reaction mechanism of three N2O molecules on Ti-porphyrin, two plausible catalytic cycles are proposed. Cycle 1 involves the consecutive decomposition of the first two N2O molecules, while cycle 2 is the decomposition of the third N2O molecule. For cycle 1, the activation energies of the first and second N2O decompositions are computed to be 3.77 and 49.99 kcal/mol, respectively. The activation energy for the third N2O decomposition in cycle 2 is 47.79 kcal/mol, which is slightly lower than that of the second activation energy of the first cycle. O2 molecules are released in cycles 1 and 2 as the products of the reaction, which requires endothermic energies of 102.96 and 3.63 kcal/mol, respectively. Therefore, the O2 desorption is mainly released in catalytic cycle 2 of a TiO3-porphyrin intermediate catalyst. In conclusion, regarding the O2 desorption step for the direct decomposition of N2O, the findings would be very useful to guide the search for potential N2O decomposition catalysts in new directions.

Oxidation of ethane to ethanol by N2O in a metal-organic framework with coordinatively unsaturated iron(II) sites

Enzymatic haem and non-haem high-valent iron-oxo species are known to activate strong C-H bonds, yet duplicating this reactivity in a synthetic system remains a formidable challenge. Although instability of the terminal iron-oxo moiety is perhaps the foremost obstacle, steric and electronic factors also limit the activity of previously reported mononuclear iron(IV)-oxo compounds. In particular, although nature's non-haem iron(IV)-oxo compounds possess high-spin S = 2 ground states, this electronic configuration has proved difficult to achieve in a molecular species. These challenges may be mitigated within metal-organic frameworks that feature site-isolated iron centres in a constrained, weak-field ligand environment. Here, we show that the metal-organic framework Fe2(dobdc) (dobdc(4-) = 2,5-dioxido-1,4-benzenedicarboxylate) and its magnesium-diluted analogue, Fe0.1Mg1.9(dobdc), are able to activate the C-H bonds of ethane and convert it into ethanol and acetaldehyde using nitrous oxide as the terminal oxidant. Electronic structure calculations indicate that the active oxidant is likely to be a high-spin S = 2 iron(IV)-oxo species.

A DFT study on the [VO]1+-ZSM-5 cluster: direct methanol oxidation to formaldehyde by N2O

The mechanism of direct oxidation of methanol to formaldehyde by N2O has been theoretically investigated by means of density functional theory over an extra framework species in ZSM-5 zeolite represented by a [(SiH3)4AlO4](1-)[V-O](1+) cluster model. The catalytic reactivity of these species is compared with that of mononuclear (Fe-O)(1+) sites in ZSM-5 investigated in our earlier work at the same level of theory (J. Catal. 2011, 282, 191). The [V-O](1+) site in ZSM-5 zeolite shows an enhanced catalytic activity for the reaction. The calculated vibrational frequencies for grafted species on vanadium sites on the surface are in good agreement with the experimental values. According to the theoretical results obtained in this study the [V-O](1+) site in the ZSM-5 catalyst has an important role in the direct catalytic oxidation of methanol to formaldehyde by N2O.

Significant effect of spin flip on the oxygen atom transfer reaction from (oxo)manganese(V) corroles to thioanisole: insights from density functional calculations

The electronic and structural features of (oxo)manganese(V) corroles and their catalyzed oxygen atom transfers to thioanisole in different spin states have been investigated by the B3LYP functional calculations. Calculations show that these corrole-based oxidants and their complexes with thioanisole generally have the singlet ground state, and their triplet forms are also accessible in consideration of the spin-orbit coupling interaction. Due to strong d-π conjugation interactions between Mn and the corrole ring arising from the π electron donation of the corrole moiety, the five-coordinated Mn approximately has the stable 18-electron configuration. The predicted free energy barriers for the singlet oxygen atom transfer reactions are generally larger than 22 kcal mol(-1), while the spin flip in reaction may remarkably increase the reactivity. In particular, the bromination on β-pyrrole carbon atoms of the meso-substituted (oxo)manganese(V) corrole strikingly enhances the spin-orbit coupling interaction and results in the dramatic increase of reactivity. The multiple spin changes are predicted to be involved in the low-energy reaction pathway. The present results show good agreement with the experimental observation and provide a detailed picture for the oxygen atom transfer reaction induced by the (oxo)manganese(V) corroles.