Molecular Origin of Anticooperativity in Hydrophobic Association

Hydrophobic hydration and pairwise hydrophobic interaction of Lennard-Jones and Mie particles in different water models

The study provides a deep computational analysis of the thermodynamic and structural features associated with the hydration of xenon, Xe, and its pairwise hydrophobic interaction (i.e., the potential of mean force, PMF), over a large temperature range. Xe is described both as a Lennard-Jones particle, LJ-Xe, and as a Mie particle, Mie-Xe (pseudo hard sphere). Three different water models are used: TIP3P-Ew, SPCE and TIP4P-2005. Mie-Xe is more hydrophobic than LJ-Xe due to the lack of the attractive energetic interactions with water molecules; its hydration, around room temperature, is opposed by a large and negative entropy change and a positive enthalpy change. The PMF of Mie-Xe is characterized by a deep minimum at contact distance whose depth increases with temperature, and whose magnitude is significantly larger than that obtained for LJ-Xe. The contact minimum configuration of Mie-Xe is favoured by a large positive entropy change and contrasted by a positive enthalpy change. These results are qualitatively the same regardless of the water model used. There is no clear connection between the values determined for the thermodynamic functions and the structural features of the hydration shells surrounding the single Mie-Xe and the couple of Mie-Xe particles in the contact minimum configuration. This confirms that the structural reorganization of water associated with such processes is characterized by an almost complete enthalpy-entropy compensation.

Role of Water Hydrogen Bonding on Transport of Small Molecules inside Hydrophobic Channels

We conducted a systematic analysis of water networking inside smooth hyperboloid hydrophobic structures (cylindrical, barrel, and hourglass shapes) to elucidate the role of water hydrogen bonding on the transport of small hydrophobic molecules (ligands). Through a series of molecular dynamics simulations, we established that a hydrogen-bonded network forming along the centerline resulted in a water exclusion zone adjacent to the walls. The size of the exclusion zone is a function of the geometry and the nonbonded interaction strength, defining the effective hydrophobicity of the structure. Exclusion of water molecules from this zone results in lower apparent viscosity, leading to acceleration of ligand transport up to 7 times faster than that measured in the bulk. Transport of ligands into and out of the hydrophobic structures was shown to be controlled by a single water molecule that capped the narrow regions in the structure. This mechanism provides physical insights into the behavior and role of water in the bottleneck regions of hydrophobic enzyme channels. These findings were then used in a sister publication [ Escalante , D. E. , Comput. Struct. Biotechnol. J. 2019 17 757 760 ] to develop a model that can accurately predict the transport of ligands along nanochannels of broad-substrate specificity enzymes.

Molecular Shape and the Hydrophobic Effect

This review focuses on papers published since 2000 on the topic of the properties of solutes in water. More specifically, it evaluates the state of the art of our understanding of the complex relationship between the shape of a hydrophobe and the hydrophobic effect. To highlight this, we present a selection of references covering both empirical and molecular dynamics studies of small (molecular-scale) solutes. These include empirical studies of small molecules, synthetic hosts, crystalline monolayers, and proteins, as well as in silico investigations of entities such as idealized hard and soft spheres, small solutes, hydrophobic plates, artificial concavity, molecular hosts, carbon nanotubes and spheres, and proteins.

Liquid-liquid phase separation of N-isopropylpropionamide aqueous solutions above the lower critical solution temperature

We investigate driving forces of the liquid–liquid phase separation of N-isopropylpropionamide (NiPPA) aqueous solutions above the lower critical solution temperature using molecular dynamics simulations. Spontaneous phase separations of the model aqueous solution with a modified OPLS-AA force field are observed above the experimentally determined cloud point. The destabilization toward the phase separation is confirmed by temperature dependence of the long-wavelength limit of the concentration-concentration structure factor, the dominant component of which is found to be an increasing effective attraction between NiPPA molecules. At varying temperatures, the potentials of mean force (PMFs) between a pair of NiPPA molecules at infinite dilution are obtained and decomposed into the nonpolar and Coulombic contributions. The nonpolar contribution, arising essentially from molecular volume, promotes association of NiPPA molecules with increasing temperature while the Coulombic one antagonizes the association. Thus, our analysis leads to a conclusion that the driving force of thermally induced aggregation of NiPPA molecules is the temperature dependence of the nonpolar contribution in PMF between NiPPA molecules, not the temperature dependence of the number or strength of hydrogen bonds between NiPPA and water molecules.

Water in cavity-ligand recognition

We use explicit solvent molecular dynamics simulations to estimate free energy, enthalpy, and entropy changes along the cavity-ligand association coordinate for a set of seven model systems with varying physicochemical properties. Owing to the simplicity of the considered systems we can directly investigate the role of water thermodynamics in molecular recognition. A broad range of thermodynamic signatures is found in which water (rather than cavity or ligand) enthalpic or entropic contributions appear to drive cavity-ligand binding or rejection. The unprecedented, nanoscale picture of hydration thermodynamics can help the interpretation and design of protein-ligand binding experiments. Our study opens appealing perspectives to tackle the challenge of solvent entropy estimation in complex systems and for improving molecular simulation models.

Potential of mean force of association of large hydrophobic particles: toward the nanoscale limit

The potentials of mean force (PMFs) were determined, in both water with the TIP3P water model and in vacuo, for systems involving formation of nonpolar dimers composed of bicyclooctane, adamantane (both an all-atom model and a sphere with the radius of 3.4 A representing adamantane), and fullerene, respectively. A series of umbrella-sampling molecular dynamics simulations with the AMBER force field were carried out for each pair under both environmental conditions. The PMFs were calculated by using the weighted histogram analysis method. The results were compared with our previously determined PMF for neopentane. The shape of the PMFs for dimers of all four nonpolar molecules is characteristic of hydrophobic interactions with contact and solvent-separated minima and desolvation maxima. The positions of all these minima and maxima change with the size of the nonpolar molecule; for larger molecules they shift toward larger distances. Comparison of the PMFs of the bicyclooctane, adamantane, and fullerene dimers in water and in vacuo shows that hydrophobic interactions in each dimer are different from that for the dimer of neopentane. Interactions in the bicyclooctane, adamantane, and fullerene dimers are stronger in vacuo than in water. These dimers cannot be treated as classical, spherical, hydrophobic objects. The solvent contribution to the PMF was also computed by subtracting the PMF determined in vacuo from that in explicit solvent. The solvent contribution to the PMFs of bicyclooctane, adamantane, and fullerene is positive, as opposed to that of neopentane. The water molecules in the first solvation sphere of both adamantane and neopentane dimers are more ordered as compared to bulk water, with their dipole moments pointing away from the surface of the dimers. The average number of hydrogen bonds per water molecule in the first hydration shell of adamantane is smaller compared to that in bulk water, but this shell is thicker for all-atom adamantane than for neopentane or a spherical model of adamantane. In the second hydration shell, the average number of hydrogen bonds is greater compared to that in bulk water only for neopentane and a spherical model of adamantane but not for the all-atom model. The strength of the hydrophobic interactions shows a linear dependence on the number of carbon atoms both in water and in vacuo. Smaller nonpolar particles interact more strongly in water than in vacuo. For larger molecules, such as bicyclooctane, adamantane and fullerene, the reversed tendency is observed.

Hydrophobic interactions in model enclosures from small to large length scales: non-additivity in explicit and implicit solvent models

The binding affinities between a united-atom methane and various model hydrophobic enclosures were studied through high accuracy free energy perturbation methods (FEP). We investigated the non-additivity of the hydrophobic interaction in these systems, measured by the deviation of its binding affinity from that predicted by the pairwise additivity approximation. While only small non-additivity effects were previously reported in the interactions in methane trimers, we found large cooperative effects (as large as -1.14 kcal mol(-1) or approximately a 25% increase in the binding affinity) and anti-cooperative effects (as large as 0.45 kcal mol(-1)) for these model enclosed systems. Decomposition of the total potential of mean force (PMF) into increasing orders of multi-body interactions indicates that the contributions of the higher order multi-body interactions can be either positive or negative in different systems, and increasing the order of multi-body interactions considered did not necessarily improve the accuracy. A general correlation between the sign of the non-additivity effect and the curvature of the solute molecular surface was observed. We found that implicit solvent models based on the molecular surface area (MSA) performed much better, not only in predicting binding affinities, but also in predicting the non-additivity effects, compared with models based on the solvent accessible surface area (SASA), suggesting that MSA is a better descriptor of the curvature of the solutes. We also show how the non-additivity contribution changes as the hydrophobicity of the plate is decreased from the dewetting regime to the wetting regime.

Implicit modeling of nonpolar solvation for simulating protein folding and conformational transitions

Accurate description of the solvent environment is critical in computer simulations of protein structure and dynamics. An implicit treatment of solvent aims to capture the mean influence of water molecules on the solute via direct estimation of the solvation free energy. It has emerged as a powerful alternative to explicit solvent, and provides a favorable compromise between computational cost and level of detail. We review the current theory and techniques for implicit modeling of nonpolar solvation in the context of simulating protein folding and conformational transitions, and discuss the main directions for further development. It is demonstrated that the current surface area based nonpolar models have severe limitations, including insufficient description of the conformational dependence of solvation, over-estimation of the strength of pair-wise nonpolar interactions, and incorrect prediction of anti-cooperativity for three-body hydrophobic associations. We argue that, to improve beyond current level of accuracy of implicit solvent models, two important aspects of nonpolar solvation need to be incorporated, namely, the length-scale dependence of hydrophobic association and solvent screening of solute-solute dispersion interactions. We recognize that substantial challenges exist in constructing a sufficiently balanced, yet reasonably efficient, implicit solvent protein force field. Nonetheless, most of the fundamental problems are understood, and exciting progress has been made over the last few years. We believe that continual work along the frontiers outlined will greatly improve one's ability to study protein folding and large conformational transitions at atomistic detail.

Potential of Mean Force of Hydrophobic Association: Dependence on Solute Size

The potentials of mean force (PMFs) were determined for systems involving formation of nonpolar dimers composed of methane, ethane, propane, isobutane, and neopentane, respectively, in water, using the TIP3P water model, and in vacuo. A series of umbrella-sampling molecular dynamics simulations with the AMBER force field was carried out for each pair in either water or in vacuo. The PMFs were calculated by using the weighted histogram analysis method (WHAM). The shape of the PMFs for dimers of all five nonpolar molecules is characteristic of hydrophobic interactions with contact and solvent-separated minima and desolvation maxima. The positions of all these minima and maxima change with the size of the nonpolar molecule, that is, for larger molecules they shift toward larger distances. The PMF of the neopentane dimer is similar to those of other small nonpolar molecules studied in this work, and hence the neopentane dimer is too small to be treated as a nanoscale hydrophobic object. The solvent contribution to the PMF was also computed by subtracting the PMF determined in vacuo from the PMF in explicit solvent. The molecular surface area model correctly describes the solvent contribution to the PMF together with the changes of the height and positions of the desolvation barrier for all dimers investigated. The water molecules in the first solvation sphere of the dimer are more ordered compared to bulk water, with their dipole moments pointing away from the surface of the dimer. The average number of hydrogen bonds per water molecule in this first hydration shell is smaller compared to that in bulk water, which can be explained by coordination of water molecules to the hydrocarbon surface. In the second hydration shell, the average number of hydrogen bonds is greater compared to bulk water, which can be explained by increased ordering of water from the first hydration shell; the net effect is more efficient hydrogen bonding between the water molecules in the first and second hydration shells.

Atomically detailed simulations of concentrated protein solutions: the effects of salt, pH, point mutations, and protein concentration in simulations of 1000-molecule systems

An ability to accurately simulate the dynamic behavior of concentrated macromolecular solutions would be of considerable utility in studies of a wide range of biological systems. With this goal in mind, a Brownian dynamics (BD) simulation method is reported here that allows systems to be modeled that comprise in excess of 1000 protein molecules, all of which are treated in atomic detail. Intermolecular forces are described in the method using an energy function that incorporates electrostatic and hydrophobic interactions and that is calibrated to reproduce experimental thermodynamic information with a single adjustable parameter. Using the method, BD simulations have been performed over a wide range of pH and ionic strengths for three proteins: hen egg white lysozyme (HEWL), chymotrypsinogen, and T4 lysozyme. The simulations reproduce experimental trends in second virial coefficients (B(22)) and translational diffusion coefficients, correctly capture changes in B(22) values due to single amino acid substitutions, and reveal a new explanation for the difficulties reported previously in the literature in reproducing B(22) values for protein solutions of very low ionic strength. In addition, a strong correlation is found between a residue's probability of being involved in a protein-protein contact in the simulations and its probability of being involved in an experimental crystal contact. Finally, exploratory simulations of HEWL indicate that the simulation model also gives a promising description of behavior at very high protein concentrations (approximately 250 g/L), suggesting that it may provide a suitable computational framework for modeling the complex behavior exhibited by macromolecules in cellular conditions.

Water properties and potential of mean force for hydrophobic interactions of methane and nanoscopic pockets studied by computer simulations

We consider model systems consisting of a methane molecule and hemispherical pockets of subnanometer radii whose walls are made of hydrophobic material. The potential of mean force for process of translocation of the methane molecule from bulk water into the pockets' interior is obtained, based on an explicit solvent molecular dynamics simulations. Accompanying changes in water density around the interacting objects and spatial distribution of solvent's potential energy are analyzed, allowing for interpretation of details of hydrophobic interactions in relation to hydrophobic hydration properties. Applicability of surface area-based models of hydrophobic effect for systems of interest is also investigated. A total work for the translocation process is not dependent on pocket's size, indicating that pocket desolvation has little contribution to free energy changes, which is consistent with the observation that solvent density is significantly reduced inside "unperturbed" pockets. Substantial solvent effects are shown to have a longer range than in case of a well investigated methane pair. A desolvation barrier is present in a smaller pocket system but disappears in the larger one, suggesting that a form of a "hydrophobic collapse" is observed.

Solvation behavior of short-chain polystyrene sulfonate in aqueous electrolyte solutions: a molecular dynamics study

We analyze the solvation behavior of short-chain polystyrene sulfonate (PSS) in aqueous electrolyte solutions by isothermal-isochoric molecular dynamics simulation to determine the solvation effects on the structure and conformation of the polyelectrolyte as a function of the aqueous environment. To that end, we study these aqueous systems including the explicit atomistic description of water, the PSS chain, and their interactions with all species in solution. In addition, we investigate the effect of the degree of sulfonation and its distribution along the PSS chain on the resulting conformation as well as solvation structure. Moreover, we assess the impact of added salts on the net charge of the PSS backbone, placing emphasis on the valence of the counterion and the extent of the ion-pair formation between the sulfonate group and the counterions. Finally, we present evidence for the so-called like-charge attraction between sulfonate groups through the formation of counterion-mediated interchain sulfonate-sulfonate and water-mediated intrachain sulfonate-sulfonate bridges, as well as between unlike counterion-counterion interactions.

Water properties inside nanoscopic hydrophobic pocket studied by computer simulations

The structure and dynamics of water in the vicinity of the hemispherical hydrophobic pocket of 8 A radius were examined via molecular dynamics simulations in NVT ensemble. Density, hydrogen bonding properties, and residence times of water molecules were projected on two-dimensional planes providing a spatial description of water behavior. We found that the average water density is significantly depleted relative to bulk value. A detailed analysis of pocket occupancy revealed fluctuations between states of completely empty pocket and a pocket filled with a bulklike fluid, which seem to result from collective behavior of water molecules. Free energy differences accompanying these fluctuations are rather small, suggesting that the given pocket radius is close to the critical one for transition between gas and liquid phases in the considered system. We show that the situation is different in the case of a simple Lennard-Jones fluid. These results indicate that changing the surface curvature from flat to concave may lead to qualitative difference in water behavior in its vicinity. We think that our studies may also put some light on binding site desolvation process which is necessary to understand to make correct predictions of binding energies.

Simple Physics-Based Analytical Formulas for the Potentials of Mean Force for the Interaction of Amino Acid Side Chains in Water. 2. Tests with Simple Spherical Systems

Simple analytical functions consisting of electrostatic, polarization, Lennard-Jones or modified Lennard-Jones, and cavity terms are proposed to express the potentials of mean force analytically for spherical particles interacting in water. The cavity term was expressed either through the molecular-surface area of the solute or by using the Gaussian-overlap model of hydrophobic hydration developed in paper 1 of this series. The analytical expressions were fitted to the potentials of mean force of a methane homodimer, heterodimers composed of a methane molecule, and an ammonium cation or a chloride anion, respectively, and dimers consisting of two chloride anions, two ammonium cations, or a chloride ion and an ammonium cation. The potentials of mean force for these dimers were determined by umbrella-sampling molecular dynamics simulations with the AMBER 7.0 force field with TIP3P water either in our earlier work or in this work. For all systems, the analytical formulas fitted the potentials of mean force very well. However, using the molecular-surface area to express the cavity term provided a good fit only when the nonbonded interactions were expressed by an all-repulsive modified Lennard-Jones potential but also resulted in non-physical values of some of the parameters. Conversely, the use of our new Gaussian-overlap-based expression for the cavity term provided a good fit to the potentials of mean force (PMFs) with Lennard-Jones nonbonded potential, and the values of all parameters were physically reasonable.

Simple Physics-Based Analytical Formulas for the Potentials of Mean Force for the Interaction of Amino Acid Side Chains in Water. 1. Approximate Expression for the Free Energy of Hydrophobic Association Based on a Gaussian-Overlap Model

A physics-based model is proposed to derive approximate analytical expressions for the cavity component of the free energy of hydrophobic association of spherical and spheroidal solutes in water. The model is based on the difference between the number and context of the water molecules in the hydration sphere of a hydrophobic dimer and of two isolated hydrophobic solutes. It is assumed that the water molecules touching the convex part of the molecular surface of the dimer and those in the hydration spheres of the monomers contribute equally to the free energy of solvation, and those touching the saddle part of the molecular surface of the dimer result in a more pronounced increase in free energy because of their more restricted mobility (entropy loss) and fewer favorable electrostatic interactions with other water molecules. The density of water in the hydration sphere around a single solute particle is approximated by the derivative of a Gaussian centered on the solute molecule with respect to its standard deviation. On the basis of this approximation, the number of water molecules in different parts of the hydration sphere of the dimer is expressed in terms of the first and the second mixed derivatives of the two Gaussians centered on the first and second solute molecules, respectively, with respect to the standard deviations of these Gaussians, and plausible analytical expressions for the cavity component of the hydrophobic-association energy of spherical and spheroidal solutes are introduced. As opposed to earlier hydration-shell models, our expressions reproduce the desolvation maxima in the potentials of mean force of pairs of nonpolar solutes in water, and their advantage over the models based on molecular-surface area is that they have continuous gradients in the coordinates of solute centers.

Simple physics-based analytical formulas for the potentials of mean force for the interaction of amino acid side chains in water. 3. Calculation and parameterization of the potentials of mean force of pairs of identical hydrophobic side chains

The potentials of mean force of homodimers of the molecules modeling hydrophobic amino acid side chains (ethane (for alanine), propane (for proline), isobutane (for valine), isopentane (for leucine and isoleucine), ethylbenzene (for phenylalanine), and methyl propyl sulfide (for methionine)) were determined by umbrella-sampling molecular dynamics simulations in explicit water as functions of distance and orientation. Analytical expressions consisting of the Gay-Berne term to represent effective van der Waals interactions and the cavity term derived in paper 1 of this series were fitted to the potentials of mean force. The positions and depths of the contact minima and the positions and heights of the desolvation maxima, including their dependence on the orientation of the molecules, were well represented by the analytical expressions for all systems, which justifies use of such potentials in coarse-grain protein-folding simulations.

Slow relaxation mode in mixtures of water and organic molecules: supramolecular structures or nanobubbles?

Aqueous solutions of tetrahydrofuran, ethanol, urea, and alpha-cyclodextrin were studied by a combination of static and dynamic laser light scattering (LLS). In textbooks, these small organic molecules are soluble in water so that there should be no observable large structures or density fluctuation in either static or dynamic LLS. However, a slow mode has been consistently observed in these aqueous solutions in dynamic LLS. Such a slow mode was previously attributed to some large complexes or supramolecular structures formed between water and these small organic molecules. Our current study reveals that it is actually due to the existence of small bubbles ( approximately 100 nm in diameter) formed inside these solutions. Our direct evidence comes from the fact that it can be removed by repeated filtration and regenerated by air injection. Our results also indicate that the formation of such nanobubbles in small organic molecule aqueous solutions is a universal phenomenon. Such formed nanobubbles are rather stable. The measurement of isothermal compressibility confirms the existence of a low density microphase, presumably nanobubbles, in these aqueous solutions. Using a proposed structural model, that is, each bubble is stabilized by small organic molecules adsorbed at the gas/water interface, we have, for the first time, estimated the pressure inside these nanobubbles.

Effects of lengthscales and attractions on the collapse of hydrophobic polymers in water

We present results from extensive molecular dynamics simulations of collapse transitions of hydrophobic polymers in explicit water focused on understanding effects of lengthscale of the hydrophobic surface and of attractive interactions on folding. Hydrophobic polymers display parabolic, protein-like, temperature-dependent free energy of unfolding. Folded states of small attractive polymers are marginally stable at 300 K and can be unfolded by heating or cooling. Increasing the lengthscale or decreasing the polymer-water attractions stabilizes folded states significantly, the former dominated by the hydration contribution. That hydration contribution can be described by the surface tension model, DeltaG = gamma(T)DeltaA, where the surface tension, gamma, is lengthscale-dependent and decreases monotonically with temperature. The resulting variation of the hydration entropy with polymer lengthscale is consistent with theoretical predictions of Huang and Chandler [Huang DM, Chandler D (2000) Proc Natl Acad Sci USA 97:] that explain the blurring of entropy convergence observed in protein folding thermodynamics. Analysis of water structure shows that the polymer-water hydrophobic interface is soft and weakly dewetted, and is characterized by enhanced interfacial density fluctuations. Formation of this interface, which induces polymer folding, is strongly opposed by enthalpy and favored by entropy, similar to the vapor-liquid interface.