Molecular dynamics simulation of folding of a short helical peptide with many charged residues

Rational Design of Cyclic Antimicrobial Peptides Based on BPC194 and BPC198

A strategy for the design of antimicrobial cyclic peptides derived from the lead compounds c(KKLKKFKKLQ) (BPC194) and c(KLKKKFKKLQ) (BPC198) is reported. First, the secondary β-structure of BPC194 and BPC198 was analyzed by carrying out molecular dynamics (MD) simulations. Then, based on the sequence pattern and the β-structure of BPC194 or BPC198, fifteen analogues were designed and synthesized on solid-phase. The best peptides (BPC490, BPC918, and BPC924) showed minimum inhibitory concentration (MIC) values <6.2 μM against Pseudomonas syringae pv. syringae and Xanthomonas axonopodis pv. vesicatoria, and an MIC value of 12.5 to 25 μM against Erwinia amylovora, being as active as BPC194 and BPC198. Interestingly, these three analogues followed the structural pattern defined from the MD simulations of the parent peptides. Thus, BPC490 maintained the parallel alignment of the hydrophilic pairs K¹-K⁸, K²-K⁷, and K⁴-K⁵, whereas BPC918 and BPC924 included the two hydrophilic interactions K³-Q¹⁰ and K⁵-K⁸. In short, MD simulations have proved to be very useful for ascertaining the structural features of cyclic peptides that are crucial for their biological activity. Such approaches could be further employed for the development of new antibacterial cyclic peptides.

On the foldability of tryptophan-containing tetra- and pentapeptides: an exhaustive molecular dynamics study

Short peptides serve as minimal model systems to decipher the determinants of foldability due to their simplicity arising from their smaller size, their ability to echo protein-like structural characteristics, and their direct implication in force field validation. Here, we describe an effort to identify small peptides that can still form stable structures in aqueous solutions. We followed the in silico folding of a selected set of 8640 tryptophan-containing tetra- and pentapeptides through 15 210 molecular dynamics simulations amounting to a total of 272.46 μs using explicit representation of the solute and full treatment of the electrostatics. The evaluation and sorting of peptides is achieved through scoring functions, which include terms based on interatomic vector distances, atomic fluctuations, and rmsd matrices between successive frames of a trajectory. Highly scored peptides are studied further via successive simulation rounds of increasing simulation length and using different empirical force fields. Our method suggested only a handful of peptides with strong foldability prognosis. The discrepancies between the predictions of the various force fields for such short sequences are also extensively discussed. We conclude that the vast majority of such short peptides do not adopt significantly stable structures in water solutions, at least based on our computational predictions. The present work can be utilized in the rational design and engineering of bioactive peptides with desired molecular properties.

MOLECULAR DYNAMICS SIMULATION OF FOLDING OF A SHORT HELICAL TOXIN PEPTIDE

A molecular dynamics simulation of the folding of a short helical toxin peptide was carried out. The simulation gave a folding time of ~10 ns, which is longer than typical time of ~1 ns for the formation of 1–2 helical turns. The simulation demonstrates that a helical peptide with disulfide bonds, which may encounter extra steric hindrance compared with the peptide without disulfide bonds, can fold in nanosecond timescale. An analysis shows that this folding time should correspond to the folding time in weak denaturation condition in experiment. Interactions and factors affecting folding pathways are analyzed and discussed.

The SAAP force field: development of the single amino acid potentials for 20 proteinogenic amino acids and Monte Carlo molecular simulation for short peptides

Molecular simulation by using force field parameters has been widely applied in the fields of peptide and protein research for various purposes. We recently proposed a new all-atom protein force field, called the SAAP force field, which utilizes single amino acid potentials (SAAPs) as the fundamental elements. In this article, whole sets of the SAAP force field parameters in vacuo, in ether, and in water have been developed by ab initio calculation for all 20 proteinogenic amino acids and applied to Monte Carlo molecular simulation for two short peptides. The side-chain separation approximation method was employed to obtain the SAAP parameters for the amino acids with a long side chain. Monte Carlo simulation for Met-enkephalin (CHO-Tyr-Gly-Gly-Phe-Met-NH2) by using the SAAP force field revealed that the conformation in vacuo is mainly controlled by strong electrostatic interactions between the amino acid residues, while the SAAPs and the interamino acid Lennard-Jones potentials are predominant in water. In ether, the conformation would be determined by the combination of the three components. On the other hand, the SAAP simulation for chignolin (H-Gly-Tyr-Asp-Pro-Glu-Thr-Gly-Thr-Trp-Gly-OH) reasonably reproduced a native-like beta-hairpin structure in water although the C-terminal and side-chain conformations were different from the native ones. It was suggested that the SAAP force field is a useful tool for analyzing conformations of polypeptides in terms of intrinsic conformational propensities of the single amino acid units.

Dynamics of water in the hydration layer of a partially unfolded structure of the protein HP-36

Atomistic molecular dynamics simulations of the folded native structure and a partially unfolded molten globule structure of the protein villin headpiece subdomain or HP-36 have been carried out with explicit solvent to explore the effects of unfolding on the dynamical behavior of water present in the hydration layers of different segments (three alpha-helices) of the protein. The calculations revealed that the unfolding of helix-2 influences the translational and rotational motions of water present in the hydration layers of the three helices in a heterogeneous manner. It is observed that a correlation exists between the unfolding of helix-2 and the microscopic kinetics of protein-water hydrogen bonds formed by its residues. This in turn has an influence on the rigidity of the hydration layers of the helices in the unfolded structure versus that in the folded native structure. These results should provide a microscopic explanation to recent solvation dynamics experiments on folded native and unfolded structures of proteins.

The effect of charge-charge interactions on the kinetics of alpha-helix formation

The formation of the monomeric alpha-helix represents one of the simplest scenarios in protein folding; however, our current understanding of the folding dynamics of the alpha-helix motif is mainly based on studies of alanine-rich model peptides. To examine the effect of peptide sequence on the folding kinetics of alpha-helices, we studied the relaxation kinetics of a 21-residue helical peptide, Conantokin-T (Con-T), using time-resolved infrared spectroscopy in conjunction with a laser-induced temperature jump technique. Con-T is a neuroactive peptide containing a large number of charged residues that is found in the venom of the piscivorous cone snail Conus tulipa . The temperature-jump relaxation kinetics of Con-T is distinctly slower than that of previously studied alanine-based peptides, suggesting that the folding time of alpha-helices is sequence-dependent. Furthermore, it appears that the slower folding of Con-T can be attributed to the fact that its helical conformation is stabilized by charge-charge interactions or salt bridges. Although this finding contradicts an earlier molecular dynamics simulation, it also has implications for existing models of protein folding.

Coupling between hydration layer dynamics and unfolding kinetics of HP-36

We have performed atomistic molecular dynamics simulations of aqueous solutions of HP-36 at 300 K in its native state, as well as at high temperatures to explore the unfolding dynamics of the protein and its correlation with the motion of water around it. On increasing the temperature a partially unfolded molten globule state is formed where the smallest alpha helix (helix 2) unfolds into a coil. It is observed that the unfolding is initiated around the residue Phe-18 which shows a sharp displacement during unfolding. We have noticed that the unfolding of the protein affects the density of water near the protein surface. Besides, the dynamics of water in the protein hydration layer has been found to be strongly correlated with the time evolution of the unfolding process. We have introduced and calculated a displacement time correlation function to monitor the change in water motion relative to the protein backbone during unfolding. We find that the unfolding of helix 2 is associated with an increase in mobility of water around it as compared to water around the other two helices. We have also explored the microscopic aspects of secondary structure specific and site specific solvation dynamics of the protein. The calculations reveal that unfolding influences the solvation dynamics of the protein molecule in a heterogeneous manner depending on the location of the polar probe residues. This seems to be in agreement with recent experimental findings.

Examination of the folding of a short alanine-based helical peptide with salt bridges using molecular dynamics simulation

A molecular dynamics simulation of the folding of a short alanine-based helical peptide of 17 residues with three Glu...Lys (i, i + 4) salt bridge pairs, referred to as the AEK17 peptide, was carried out. The simulation gave an estimated simulation folding time of 2.5 ns, shorter than 12 ns for an alanine-based peptide of 16 residues with three Lys residues only, referred to as the AK16 peptide, simulated previously. After folded, the AEK17 peptide had a helical content of 77%, in excellent agreement with the experimentally determined value of 80%. An examination of the folding pathways of AEK17 indicated that the peptide proceeded via three-turn helix conformations more than the helix-turn-helix conformation in the folding pathways. An analysis of interactions indicated that the formation of hydrogen bonds between Lys residue side chains and backbone carbonyls is a major factor in the abundant conformation of the three-turn helix intermediate. The substitution of three Ala with Glu residues reduces the extent of hydrophobic interaction in alanine-based AK peptides with the result that the breaking of the interactions of Lys epsilon-NH3+(side chain)...C=O(backbone) is a major activation action for the AEK17 to achieve a complete fold, in contrast to the AK16 peptide, in which breaking non-native hydrophobic interaction is the rate-determining step.