C80 Encaging Four Different Atoms: The Synthesis, Isolation, and Characterizations of ScYErN@C80

Mixed dysprosium-lanthanide nitride clusterfullerenes DyM2N@C80-Ih and Dy2MN@C80-Ih (M = Gd, Er, Tm, and Lu): synthesis, molecular structure, and quantum motion of the endohedral nitrogen atom

Systematic exploration of the synthesis of mixed-metal Dy-M nitride clusterfullerenes (NCFs, M = Gd, Er, Tm, Lu) is performed, and the impact of the second metal on the relative yield is evaluated. We demonstrate that the ionic radius of the metal appears to be the main factor allowing explanation of the relative yields in Dy-M mixed-metal systems with M = Sc, Lu, Er, and Gd. At the same time, Dy-Tm NCFs show anomalously low yields, which is not consistent with the relatively small ionic radius of Tm³⁺ but can be explained by the high third ionization potential of Tm. Complete separation of Dy-Gd and Dy-Er, as well as partial separation of Dy-Lu M₃N@C₈₀ nitride clusterfullerenes, is accomplished by recycling HPLC. The molecular structures of DyGd₂N@C₈₀ and DyEr₂N@C₈₀ are analyzed by means of single-crystal X-ray diffraction. A remarkable ordering of mixed-metal nitride clusters is found despite similar size and electronic properties of the metals. Possible pyramidalization of the nitride clusters in these and other nitride clusterfullerenes is critically analyzed with the help of DFT calculations and reconstruction of the nitrogen inversion barrier in M₃N@C₈₀ molecules is performed. Although a double-well potential with a pyramidal cluster structure is found to be common for most of them, the small size of the inversion barrier often leads to an apparent planar structure of the cluster. This situation is found for those M₃N@C₈₀ molecules in which the energy of the lowest vibrational level exceeds that of the inversion barrier, including Dy₃N@C₈₀ and DyEr₂N@C₈₀. The genuine pyramidal structure can be observed by X-ray diffraction only when the lowest vibrational level is below the inversion barrier, such as those found in Gd₃N@C₈₀ and DyGd₂N@C₈₀. The quantum nature of molecular vibrations becomes especially apparent when the size of the inversion barrier is comparable to the energy of the lowest vibrational levels.

Carbide clusterfullerene DyYTiC@C80 featuring three different metals in the endohedral cluster and its single-ion magnetism

Carbide clusterfullerene DyYTiC@C80-Ih with three different metal atoms in the endohedral cluster is obtained by arc-discharge synthesis with methane as reactive gas and is successfully isolated by HPLC. The compound shows single-molecule magnetism (SMM) with magnetic hysteresis below 8 K. The SMM properties of DyYTiC@C80 are compared to those of DySc2N@C80 and the influence of the central atom in the endohedral cluster is analyzed.

When metal clusters meet carbon cages: endohedral clusterfullerenes

Fullerenes have the characteristic of a hollow interior, and this unique feature triggers intuitive inspiration to entrap atoms, ions or clusters inside the carbon cage in the form of endohedral fullerenes. In particular, upon entrapping an otherwise unstable metal cluster into a carbon cage, the so-called endohedral clusterfullerenes fulfil the mutual stabilization of the inner metal cluster and the outer fullerene cage with a specific isomeric structure which is often unstable as an empty fullerene. A variety of metal clusters have been reported to form endohedral clusterfullerenes, including metal nitrides, carbides, oxides, sulfides, cyanides and so on, making endohedral clusterfullerenes the most variable and intriguing branch of endohedral fullerenes. In this review article, we present an exhaustive review on all types of endohedral clusterfullerenes reported to date, including their discoveries, syntheses, separations, molecular structures and properties as well as their potential applications in versatile fields such as biomedicine, energy conversion, and so on. At the end, we present an outlook on the prospect of endohedral clusterfullerenes.

Sc3N@Cs(39715)–C82: a missing isomer linked to Sc3N@C2v(39718)–C82 by a single step Stone–Wales transformation

Density functional theory combined with statistical mechanics calculations indicate that Sc₃N@C_2v(39718)–C₈₂ and Sc₃N@C_s(39715)–C₈₂ linked by a single Stone–Wales transformation can be obtained at the fullerene formation temperature region.

Endohedral metallofullerenes based on spherical I(h)-C(80) cage: molecular structures and paramagnetic properties

Fullerenes are carbon cages assembled from fused hexagons andpentagons that have closed networks and conjugated π systems. The curve of the fullerene structure requires that the constituent carbon atoms take on a pyramidal shape and produces extra strain energy. However, the highly symmetrical geometry of the fullerene decreases the surface tension in these structures, so highly symmetrical fullerenes are usually very stable. For example, C60 with icosahedral symmetry (Ih) is the most stable fullerene molecule. However, another highly symmetrical fullerene, Ih-C80, is extremely unstable. The reason for this difference is the open-shell electronic structure of Ih-C80, which has a 4-fold degenerate HOMO occupied by only two electrons. Predictably, once the degenerate HOMO of Ih-C80 accepts six more electrons, it forms a closed-shell electronic structure similar to Ih-C60 and with comparable stability. Because the hollow structure of fullerenes can encapsulate metal atoms and those internal metals can transfer electrons to the fullerene cage, the encapsulation of metal clusters may provide an ideal technique for the stabilization of the Ih-C80 fullerenes. In this Account, we focus on the molecular structures and paramagnetic properties of spherical Ih-C80 endohedral fullerenes encaging a variety of metal moieties, such as metal atoms (Mn), metal nitride (M3N), metal carbide (MnC2), metal carbonitride (M3CN), and metal oxides (M4Om). We introduce several types of endohedral metallofullerenes such as Sc4C2@Ih-C80, which exhibits a Russian-doll-like structure, and Sc3CN@Ih-C80, which encapsulates a planar metal carbonitride cluster. In addition, we emphasize the paramagnetic properties of Ih-C80-based metallofullerenes, such as Sc3C2@Ih-C80, Y2@C79N, and M3N@Ih-C80, to show how those spin-active species can present a controllable paramagnetism. This Account highlights an inspiring molecular world within the spherical Ih-C80 cages of various metallofullerenes.

Gd-Sc-based mixed-metal nitride cluster fullerenes: mutual influence of the cage and cluster size and the role of scandium in the electronic structure

The influence of the cage as well as of the cluster size has been studied in Gd-Sc nitride cluster fullerenes, which have been synthesized and isolated for these studies. A series of carbon cages ranging from C78 to C88 have been synthesized, isolated, and characterized in detail using absorption and vibrational spectroscopy as well as electrochemistry and density functional theory calculations. Gd-Sc mixed-metal cluster fullerenes in carbon cages different from C80 were described for the first time. A review of their structures, properties, and stability is given. The synthesis was performed with melamine as an effective solid source of nitrogen, providing high fullerene yield and suppressing empty fullerene formation. Substitution of gadolinium by scandium imposes a noticeable influence on the electronic structure of nitride cluster fullerenes as revealed by electrochemical, spectroscopic, and computational methods.

Synthesis, isolation, and spectroscopic characterization of holmium-based mixed-metal nitride clusterfullerenes: HoxSc3-xN@C80 (x=1, 2)

The synthesis, isolation and spectroscopic characterization of holmium-based mixed metal nitride clusterfullerenes Ho(x) Sc(3-x) N@C(80) (x=1, 2) are reported. Two isomers of Ho(x) Sc(3-x) N@C(80) (x=1, 2) were synthesized by the reactive gas atmosphere method and isolated by multistep recycling HPLC. The isomeric structures of Ho(x) Sc(3-x) N@C(80) (x=1, 2) were characterized by laser-desorption time-of-flight (LD-TOF) mass spectrometry and UV/Vis/NIR, FTIR and Raman spectroscopy. A comparative study of M(x) Sc(3-x) N@C(80) (M=Gd, Dy, Lu, Ho) demonstrates the dependence of their electronic and vibrational properties on the encaged metal. Despite the distinct perturbation induced by 4f(10) electrons, we report the first paramagnetic (13) C NMR study on Ho(x) Sc(3-x) N@C(80) (I; x=1, 2) and confirm I(h) -symmetric cage structure. A (45) Sc NMR study on HoSc(2) N@C(80) (I, II) revealed a temperature-dependent chemical shift in the temperature range of 268-308 K.

Titanium/yttrium mixed metal nitride clusterfullerene TiY2N@C80: synthesis, isolation, and effect of the group-III metal

Titanium/yttrium mixed metal nitride clusterfullerene (MMNCF) TiY(2)N@C(80) has been successfully synthesized, representing the first Ti-containing non-scandium MMNCF. TiY(2)N@C(80) has been isolated by multistep HPLC and characterized by various spectroscopies in combination with DFT computations. The electronic absorption property of TiY(2)N@C(80) was characterized by UV-vis-NIR spectroscopy, indicating the resemblance to that of TiSc(2)N@C(80) with broad shoulder absorptions. The optical band gap of TiY(2)N@C(80) (1.39 eV) is very close to that of TiSc(2)N@C(80) (1.43 eV) but much smaller than that of Y(3)N@C(80)(I(h), 1.58 eV). Such a resemblance of the overall absorption feature of TiY(2)N@C(80) to TiSc(2)N@C(80) suggests that TiY(2)N@C(80) has a similar electronic configuration to that of TiSc(2)N@C(80), that is, (TiY(2)N)(6+)@C(80)(6-). FTIR spectroscopic study and DFT calculations accomplish the assignment of the C(80):I(h) isomer to the cage structure of TiY(2)N@C(80), with the C(1) conformer being the lowest energy structure, which is different from the C(s) conformer assigned to TiSc(2)N@C(80). The electrochemical properties of TiY(2)N@C(80) were investigated by cyclic voltammetry, revealing the reversible first oxidation and first reduction step with E(1/2) at 0.00 and -1.13 V, respectively, both of which are more negative than those of TiSc(2)N@C(80), while the electrochemical energy gap of TiY(2)N@C(80) (1.11 V) is almost the same as that of TiSc(2)N@C(80) (1.10 V). Contrary to the reversible first reduction step, the second and third reduction steps of TiY(2)N@C(80) are irreversible, and this redox behavior is dramatically different from that of TiSc(2)N@C(80), which shows three reversible reduction steps, indicating the strong influence of the encaged group-III metal (Y or Sc) on the electronic properties of TiM(2)N@C(80) (M = Y, Sc).

Fullerenes encaging metal clusters--clusterfullerenes

Clusterfullerenes represent a novel branch of endohedral fullerenes, which are characterized by a robust fullerene cage with metal clusters encaged in its hollow. Since the discovery of nitride clusterfullerenes (NCFs) in 1999, the family of clusterfullerenes has been significantly expanded within the past decade, with new members including carbide clusterfullerenes (CCFs), hydrocarbide clusterfullerenes (HCCFs), oxide clusterfullerenes (OCFs), sulfide clusterfullerenes (SCFs), and carbonitride clusterfullerenes (CNCFs). We first present the classification of clusterfullerenes and list all the clusterfullerenes reported to date. For each type of clusterfullerenes, we review in detail their synthesis, separation, intriguing molecular structures and properties. For NCFs, as the first and most important clusterfullerenes, we point out the significance of their discovery and focus on their new synthesis and separation methods as well as the new advances. Finally the potential applications of clusterfullerenes are addressed. We conclude that clusterfullerenes appear to be the fastest growing family of endohedral fullerenes up to now, and emphasize the importance of exploring new structures and chemical functionalizations of clusterfullerenes.

Chemical, electrochemical, and structural properties of endohedral metallofullerenes

Ever since the first experimental evidence of the existence of endohedral metallofullerenes (EMFs) was obtained, the search for carbon cages with encapsulated metals and small molecules has become a very active field of research. EMFs exhibit unique electronic and structural features, with potential applications in many fields. Furthermore, functionalized EMFs offer additional potential applications because of their higher solubility and their ease of characterization by X-ray crystallography and other techniques. Herein we review the general field of EMFs, particularly of functionalized EMFs. We also address their structures and their (electrochemical) properties, as well as applications of these fascinating compounds.

Lanthanum nitride endohedral fullerenes La3N@C2n (43 <or= n <or= 55): preferential formation of La3N@C96

While the trimetallic nitrides of Sc, Y and the lanthanides between Gd and Lu preferentially template C(80) cages, M(3)N@C(80), and while those of Ce, Pr and Nd preferentially template the C(88) cage, M(3)N@C(88), we show herein that the largest metallic nitride cluster, La(3)N, preferentially leads to the formation of La(3)N@C(96) and to a lesser extent the La(3)N@C(88). This is the first time that La(3)N is successfully encapsulated inside fullerene cages. La(3)N@C(2n) metallofullerenes were synthesized by arcing packed graphite rods in a modified Krätschmer-Huffman arc reactor, extracted from the collected soot and identified by mass spectroscopy. They were isolated and purified by high performance liquid chromatography (HPLC). Different arcing conditions were studied to maximize fullerene production, and results showed that yields have a high La(2)O(3)/C dependence. Relatively high yields were obtained when a 1:5 ratio was used. Three main fractions, La(3)N@C(88), La(3)N@C(92), and La(3)N@C(96), were characterized by UV/Vis-NIR and cyclic voltammetry. Unlike other trimetallic nitride metallofullerenes of the same carbon cage size, La(3)N@C(88) exhibits a higher HOMO-LUMO gap and irreversible reduction and oxidation steps.

Structure, Stability, and Cluster-Cage Interactions in Nitride Clusterfullerenes M3N@C2n (M = Sc, Y; 2n = 68−98): a Density Functional Theory Study

Extensive semiempirical calculations of the hexaanions of IPR (isolated pentagon rule) and non-IPR isomers of C(68)-C(88) and IPR isomers of C(90)-C(98) followed by DFT calculations of the lowest energy structures were performed to find the carbon cages that can provide the most stable isomers of M(3)N@C(2n) clusterfullerenes (M = Sc, Y) with Y as a model for rare earth ions. DFT calculations of isomers of M(3)N@C(2n) (M = Sc, Y; 2n = 68-98) based on the most stable C(2n)(6-) cages were also performed. The lowest energy isomers found by this methodology for Sc(3)N@C(68), Sc(3)N@C(78), Sc(3)N@C(80), Y(3)N@C(78), Y(3)N@C(80), Y(3)N@C(84), Y(3)N@C(86), and Y(3)N@C(88) are those that have been shown to exist by single-crystal X-ray studies as Sc(3)N@C(2n) (2n = 68, 78, 80), Dy(3)N@C(80), and Tb(3)N@C(2n) (2n = 80, 84, 86, 88) clusterfullerenes. Reassignment of the carbon cage of Sc(2)@C(76) to the non-IPR Cs: 17490 isomer is also proposed. The stability of nitride clusterfullerenes was found to correlate well with the stability of the empty 6-fold charged cages. However, the dimensions of the cage in terms of its ability to encapsulate M(3)N clusters were also found to be an important factor, especially for the medium size cages and the large Y(3)N cluster. In some cases the most stable structures are based on the different cage isomers for Sc(3)N and Y(3)N clusters. Up to the cage size of C(84), non-IPR isomers of C(2n)(6-) and M(3)N@C(2n) were found to compete with or to be even more stable than IPR isomers. However, the number of adjacent pentagon pairs in the most stable non-IPR isomers decreases as cage size increases: the most stable M(3)N@C(2n) isomers have three such pairs for 2n = 68-72, two pairs for n = 74-80, and only one pair for n = 82, 84. For C(86) and C(88) the lowest energy IPR isomers are much more stable than any non-IPR isomer. The trends in the stability of the fullerene isomers and the cluster-cage binding energies are discussed, and general rules for stability of clusterfullerenes are established. Finally, the high yield of M(3)N@C(80) (Ih) clusterfullerenes for any metal is explained by the exceptional stability of the C(80)(6-) (Ih: 31924) cage, rationalized by the optimum distribution of the pentagons leading to the minimization of the steric strain, and structural similarities of C(80) (Ih: 31924) with the lowest energy non-IPR isomers of C(760(6-), C(78)(6-), C(82)(6-), and C(84)(6-) pointed out.

Metal nitride cluster fullerenes: their current state and future prospects

The world of endohedral fullerenes was significantly enlarged over the past seven years by the cluster fullerenes, which contain structures such as the M(2)C(2) carbides and the M(3)N nitrides. While the carbide clusters are generated under the standard arc-burning conditions according to stabilization conditions, the nitride cluster fullerenes (NCFs) are formed by varying the composition of the cooling gas atmosphere in the arc-burning process. The special conditions for NCF synthesis is described in detail and the optimum conditions for the production of NCFs as the main product in fullerene syntheses are given. A general review of all NCFs reported to date consists of the structures, properties, and stability of the NCFs as well as the abundance of the NCFs in the fullerene soot. It is shown that all cages with even carbon atoms from C(68) to C(98) are available as endohedral nitride cluster structures (with the exception of C(72), C(74), and C(76)). Specifically, the NCFs form the largest number of structures that violate the isolated pentagon rule (IPR). Finally some practical applications of these cluster fullerenes are illustrated and an outlook is given, taking the superior stability of these endohedral fullerenes into account.