Generalized Energy-Based Fragmentation Approach for Computing the Ground-State Energies and Properties of Large Molecules

Intermolecular interaction energies with AROFRAG-A systematic approach for fragmentation of aromatic molecules

Intermolecular interactions with polycyclic aromatic hydrocarbons (PAHs) represent an important area of physisorption studies. These investigations are often hampered by a size of interacting PAHs, which makes the calculation prohibitively expensive. Therefore, methods designed to deal with large molecules could be helpful to reduce the computational costs of such studies. Recently we have introduced a new systematic approach for the molecular fragmentation of PAHs, denoted as AROFRAG, which decomposes a large PAH molecule into a set of predefined small PAHs with a benzene ring being the smallest unbreakable unit, and which in conjunction with the Molecules-in-Molecules (MIM) approach provides an accurate description of total molecular energies. In this contribution we propose an extension of the AROFRAG, which provides a description of intermolecular interactions for complexes composed of PAH molecules. The examination of interaction energy partitioning for various test cases shows that the AROFRAG3 model connected with the MIM approach accurately reproduces all important components of the interaction energy. An additional important finding in our study is that the computationally expensive long-range electron-correlation part of the interaction energy, that is, the dispersion component, is well described at lower AROFRAG levels even without MIM, which makes the latter models interesting alternatives to existing methods for an accurate description of the electron-correlated part of the interaction energy.

The Quality of Embedding Charges Is Critical for Convergence of Many-Body Expansions When BSSE Is Absent

There is conflicting evidence in the literature concerning the benefits of charge embedding on the convergence of many-body expansions (MBEs). Using a systematic series of water and ion-water clusters of varying size, this study indicates that the effects of charge embedding can be masked by basis set superposition error (BSSE). When BSSE is removed, this study demonstrates that charge embedding can significantly accelerate MBE convergence, where the electrostatically embedded two-body method, EE-MBE(2), can often yield accuracy close to the four-body method, MBE(4). Contrary to previous studies on smaller systems, this work shows that the performance of EE-MBE is highly sensitive to the charge model, with the best performance obtained when the natural population analysis (NPA) charge model is used and generated at the same level of theory used in the subsystem and supersystem calculations. It was demonstrated that the "3c" composite method, PBEh-3c, yields NPA atomic charges that are in excellent agreement with those obtained from supersystem density functional theory calculations. The linear-scaling X-Polarization method provides a more general approach to estimating these supersystem QM atomic charges, but its performance depends on how the fragments are defined.

Many-Body Expansion-Based Quantum Mechanical Force Field for Cyclotrimethylene Trinitramine under High Pressure

RDX undergoes pressures of approximately 30-50 GPa during detonation, leading to significant changes in intermolecular interactions. Accurately describing these interactions is crucial for understanding the energy transfer in the detonation process. To address this, this work introduces a many-body expansion-based quantum mechanical force field (MB-QMFF) to accurately describe RDX's intermolecular interactions under high pressures. Using MB-QMFF, we evaluated various density functionals and found that the M062X functional with GD3 dispersion correction provided the highest accuracy. Regarding intermolecular forces, two-body interactions were the most significant, with three-body interactions being negligible. Additionally, we investigated intermolecular energy variations at different densities (or pressures). The results clearly demonstrate an accurate description of intermolecular interactions by the MB-QMFF scheme. Therefore, we believe that the MB-QMFF scheme can serve as a foundation for the development of RDX-specific force fields and pave the way for future studies on the detonation process of RDX.

Excitation configuration analysis for divide-and-conquer excited-state calculation method using dynamical polarizability

The authors previously developed a divide-and-conquer (DC)-based non-local excited-state calculation method for large systems using dynamical polarizability [Nakai and Yoshikawa, J. Chem. Phys. 146, 124123 (2017)]. This method evaluates the excitation energies and oscillator strengths using information on the dynamical polarizability poles. This article proposes a novel analysis of the previously developed method to obtain further configuration information on excited states, including excitation and de-excitation coefficients of each excitation configuration. Numerical applications to simple molecules, such as ethylene, hydrogen molecule, ammonia, and pyridazine, confirmed that the proposed analysis could accurately reproduce the excitation and de-excitation coefficients. The combination with the DC scheme enables both the local and non-local excited states of large systems with an excited nature to be treated.

Fragment-Based Deep Learning for Simultaneous Prediction of Polarizabilities and NMR Shieldings of Macromolecules and Their Aggregates

Simultaneous prediction of the molecular response properties, such as polarizability and the NMR shielding constant, at a low computational cost is an unresolved issue. We propose to combine a linear-scaling generalized energy-based fragmentation (GEBF) method and deep learning (DL) with both molecular and atomic information-theoretic approach (ITA) quantities as effective descriptors. In GEBF, the total molecular polarizability can be assembled as a linear combination of the corresponding quantities calculated from a set of small embedded subsystems in GEBF. In the new GEBF-DL(ITA) protocol, one can predict subsystem polarizabilities based on the corresponding molecular wave function (thus electron density and ITA quantities) and DL model rather than calculate them from the computationally intensive coupled-perturbed Hartree-Fock or Kohn-Sham equations and finally obtain the total molecular polarizability via a linear combination equation. As a proof-of-concept application, we predict the molecular polarizabilities of large proteins and protein aggregates. GEBF-DL(ITA) is shown to be as accurate enough as GEBF, with mean absolute percentage error <1%. For the largest protein aggregate (>4000 atoms), GEBF-DL(ITA) gains a speedup ratio of 3 compared with GEBF. It is anticipated that when more advanced electronic structure methods are used, this advantage will be more appealing. Moreover, one can also predict the NMR chemical shieldings of proteins with reasonably good accuracy. Overall, the cost-efficient GEBF-DL(ITA) protocol should be a robust theoretical tool for simultaneously predicting polarizabilities and NMR shieldings of large systems.

AROFRAG─A Systematic Approach for Fragmentation of Aromatic Molecules

We present a new systematic fragmentation scheme of polycyclic aromatic hydrocarbons (PAHs), including fullerenes and nanotubes, based on an idea to treat a sextet ring as a single unbreakable unit so that the basic unit of aromaticity remains preserved upon fragmentation. In the approach, denoted as AROFRAG (from aromatic fragmentation), a set of predefined elementary subsystems, such as naphthalene and biphenyl in the first model and larger PAHs in the second and third models, is generated with appropriate weights with the aim of reproducing the structure of the original molecule. The energies of the molecules are approximated as weighted sums of the energies of these subsystems. For symmetric cases, e.g., fullerenes, the point-group symmetry is preserved during the decomposition. The AROFRAG is used in conjunction with the molecule-in-molecule (MIM) technique to obtain an accurate description of the electronic energies. The new approach has been applied for selected graphene structures and fullerene doped with boron and nitrogen atoms, for which isomerization energies were calculated, as well as for several nanotubes and regular fullerene molecules. The combination of the third AROFRAG model and the MIM approach leads to the reproduction of electronic energies with a few milli-hartree accuracy at a fraction of the computational cost of the original method.

Calculating 13 C NMR chemical shifts of large molecules using the eXtended ONIOM method at high accuracy with a low cost

Fragmentation-based methods for nuclear magnetic resonance (NMR) chemical shift calculations have become more and more popular in first-principles calculations of large molecules. However, there are many options for a fragmentation-based method to select, such as theoretical methods, fragmentation schemes, the number of levels of theory, etc. It is important to study the optimal combination of the options to achieve a good balance between accuracy and efficiency. Here we investigate different combinations of options used by a fragmentation-based method, the eXtended ONIOM (XO) method, for 13 C chemical shift calculations on a set of organic and biological molecules. We found that: (1) introducing Hartree-Fock exchange into density functional theory (DFT) could reduce the calculation error due to fragmentation in contrast to pure DFT functionals, while a hybrid functional, xOPBE, is generally recommended; (2) fragmentation schemes generated from the molecular tailoring approach (MTA) with small level parameter n, for example, n = 2 and the degree-based fragmentation method (DBFM) with n = 1, are sufficient to achieve satisfactory accuracy; (3) the two-level XO (XO2) NMR calculation is superior to the calculation with only one level of theory, as the second level (i.e., low level) of theory provides a way to well describe the long-range effect. These findings are beneficial to practical applications of fragmentation-based methods for NMR chemical shift calculations of large molecules.

Competition between Solvent···Solvent and Solvent···Solute Interactions in the Microhydration of the Tetrafluoroborate Anion, BF4-(H2O)n=1,2,3,4

This study systematically examines the interactions of the tetrafluoroborate anion (BF4-) with up to four water molecules (BF4-(H2O)n=1,2,3,4). Full geometry optimizations and subsequent harmonic vibrational frequency computations are performed using a variety of density functional theory (DFT) methods (B3LYP, B3LYP-D3BJ, and M06-2X) and the MP2 ab initio method with a triple-ζ correlation consistent basis set augmented with diffuse functions on all non-hydrogen atoms (cc-pVTZ for H and aug-cc-pVTZ for B, O, and F; denoted as haTZ). Optimized structures and harmonic vibrational frequencies were also obtained with the CCSD(T) ab initio method and the haTZ basis set for the mono- and dihydrate (n = 1, 2) structures. The 2-body:Many-body (2b:Mb) technique, in which CCSD(T) computations capture the 1- and 2-body contributions to the interactions and MP2 computations recover all higher-order contributions, was used to extend these demanding computations to the tri- and tetrahydrate (n = 3, 4) systems. Four, five, and eight new stationary points have been identified for the di-, tri-, and tetrahydrate systems, respectively. The global minimum of the monohydrate adopts a symmetric double ionic hydrogen bond motif with C2v symmetry and an electronic dissociation energy of 13.17 kcal mol-1 at the CCSD(T)/haTZ level of theory. This strong solvent···solute interaction, however, competes with solute···solute interactions in the lowest-energy BF4-(H2O)n=2,3,4 minima that are not seen in the other di-, tri-, or tetrahydrate minima. The latter interactions help increase the 2b:Mb dissociation energies to more than 26, 41, and 51 kcal mol-1 for n = 2, 3, and 4, respectively. Structures that form hydrogen bonds between the solvating water molecules also exhibit the largest shifts in the harmonic OH stretching frequencies for the waters of hydration. These shifts can exceed -280 cm-1 relative to an isolated H2O molecule at the 2b:Mb/haTZ level of theory.

Static embedding with pair coupled cluster doubles based methods

Quantum embedding methods have recently been significantly developed to model large molecular structures. This work proposes a novel wave function theory in a density functional theory (WTF-in-DFT) embedding scheme based on pair-coupled cluster doubles (pCCD)-type methods. While pCCD can reliably describe strongly-correlated systems with mean-field-like computational cost, the large extent of the dynamic correlation can be accounted for by (linearized) coupled-cluster corrections on top of the pCCD wave function. Here we focus on the linearized coupled-cluster singles and doubles (LCCSD) ansatz for electronic ground states and its extension to excited states within the equation of motion (EOM) formalism. We test our EOM-pCCD-LCCSD-in-DFT approach for the vertical excitation energies of the hydrogen-bonded water-ammonia complex, micro-solvated thymine, and uranyl tetrahalides (UO2X42-, X = F, Cl, Br). Furthermore, we assess the quality of the embedding potential using an orbital entanglement and correlation analysis. The approximate embedding models successfully capture changes in the excitation energies going from bare fragments to supramolecular structures and represent a promising computational method for excited states in large molecular systems.

Accurate and Efficient Prediction of Post-Hartree-Fock Polarizabilities of Condensed-Phase Systems

To accurately and efficiently predict the molecular response properties (such as polarizability) at post-Hartree-Fock levels for condensed-phase systems under periodic boundary conditions (PBC) is still an unaccomplished and ongoing task. We demonstrate that static isotropic polarizabilities can be cost-effectively predicted at post-Hartree-Fock levels by combining the linear-scaling generalized energy-based fragmentation (GEBF) and information-theoretic approach (ITA) quantities. In PBC-GEBF, the total molecular polarizability of an extended system is obtained as a linear combination of the corresponding quantities of a series of small embedded subsystems of several monomers. Here, we show that in the PBC-GEBF-ITA framework, one can obtain the molecular polarizabilities and establish linear relations to ITA quantities. Once these relations are established for smaller subsystems, one can predict the polarizabilities of larger subsystems directly from the molecular wavefunction (or electron density) via ITA quantities. Alternatively, one can determine the total molecular polarizability via a linear combination equation in PBC-GEBF. We have corroborated that this newly proposed PBC-GEBF-ITA protocol is much more efficient than the original PBC-GEBF approach but is not much less accurate and that this conclusion holds for both many-body perturbation theory and the coupled cluster calculations. Good efficiency and transferability of the PBC-GEBF-ITA protocol are demonstrated for periodic systems with several hundred atoms in a unit cell.

Toward an extreme-scale electronic structure system

Electronic structure calculations have the potential to predict key matter transformations for applications of strategic technological importance, from drug discovery to material science and catalysis. However, a predictive physicochemical characterization of these processes often requires accurate quantum chemical modeling of complex molecular systems with hundreds to thousands of atoms. Due to the computationally demanding nature of electronic structure calculations and the complexity of modern high-performance computing hardware, quantum chemistry software has historically failed to operate at such large molecular scales with accuracy and speed that are useful in practice. In this paper, novel algorithms and software are presented that enable extreme-scale quantum chemistry capabilities with particular emphasis on exascale calculations. This includes the development and application of the multi-Graphics Processing Unit (GPU) library LibCChem 2.0 as part of the General Atomic and Molecular Electronic Structure System package and of the standalone Extreme-scale Electronic Structure System (EXESS), designed from the ground up for scaling on thousands of GPUs to perform high-performance accurate quantum chemistry calculations at unprecedented speed and molecular scales. Among various results, we report that the EXESS implementation enables Hartree-Fock/cc-pVDZ plus RI-MP2/cc-pVDZ/cc-pVDZ-RIFIT calculations on an ionic liquid system with 623 016 electrons and 146 592 atoms in less than 45 min using 27 600 GPUs on the Summit supercomputer with a 94.6% parallel efficiency.

Toward a general neural network force field for protein simulations: Refining the intramolecular interaction in protein

Molecular dynamics (MD) is an extremely powerful, highly effective, and widely used approach to understanding the nature of chemical processes in atomic details for proteins. The accuracy of results from MD simulations is highly dependent on force fields. Currently, molecular mechanical (MM) force fields are mainly utilized in MD simulations because of their low computational cost. Quantum mechanical (QM) calculation has high accuracy, but it is exceedingly time consuming for protein simulations. Machine learning (ML) provides the capability for generating accurate potential at the QM level without increasing much computational effort for specific systems that can be studied at the QM level. However, the construction of general machine learned force fields, needed for broad applications and large and complex systems, is still challenging. Here, general and transferable neural network (NN) force fields based on CHARMM force fields, named CHARMM-NN, are constructed for proteins by training NN models on 27 fragments partitioned from the residue-based systematic molecular fragmentation (rSMF) method. The NN for each fragment is based on atom types and uses new input features that are similar to MM inputs, including bonds, angles, dihedrals, and non-bonded terms, which enhance the compatibility of CHARMM-NN to MM MD and enable the implementation of CHARMM-NN force fields in different MD programs. While the main part of the energy of the protein is based on rSMF and NN, the nonbonded interactions between the fragments and with water are taken from the CHARMM force field through mechanical embedding. The validations of the method for dipeptides on geometric data, relative potential energies, and structural reorganization energies demonstrate that the CHARMM-NN local minima on the potential energy surface are very accurate approximations to QM, showing the success of CHARMM-NN for bonded interactions. However, the MD simulations on peptides and proteins indicate that more accurate methods to represent protein-water interactions in fragments and non-bonded interactions between fragments should be considered in the future improvement of CHARMM-NN, which can increase the accuracy of approximation beyond the current mechanical embedding QM/MM level.

Microscopic Mechanism of Proton Transfer in Pure Water under Ambient Conditions

Water molecules and the associated proton transfer (PT) are prevalent in chemical and biological systems and have been a hot research topic. Spectroscopic characterization and ab initio molecular dynamics (AIMD) simulations have previously revealed insights into acidic and basic liquids. Presumably, the situation in the acidic/basic solution is not necessarily the same as in pure water; in addition, the autoionization constant for water is only 10^-14 under ambient conditions, making the study of PT in pure water challenging. To overcome this issue, we modeled periodic water box systems containing 1000 molecules for tens of nanoseconds based on a neural network potential (NNP) with quantum mechanical accuracy. The NNP was generated by training a dataset containing the energies and atomic forces of 17 075 configurations of periodic water box systems, and these data points were calculated at the MP2 level that considers electron correlation effects. We found that the size of the system and the duration of the simulation have a significant impact on the convergence of the results. With these factors considered, our simulations showed that hydronium (H₃O⁺) and hydroxide (OH^-) ions in water have distinct hydration structures, thermodynamic and kinetic properties, e.g., the longer-lasting and more stable hydrated structure of OH^- ions than that of H₃O⁺, as well as a significantly higher free energy barrier for the OH^--associated PT than that of H₃O⁺, leading the two to exhibit completely different PT behaviors. Given these characteristics, we further found that PT via OH^- ions tends not to occur multiple times or between many molecules. In contrast, PT via H₃O⁺ can synergistically occur among multiple molecules and prefers to adopt a cyclic pattern among three water molecules, while it occurs mostly in a chain pattern when more water molecules are involved. Therefore, our studies provide a detailed and solid microscopic explanation for the PT process in pure water.

Excited-State Polarizabilities: A Combined Density Functional Theory and Information-Theoretic Approach Study

Accurate and efficient determination of excited-state polarizabilities (α) is an open problem both experimentally and computationally. Following our previous work, (Phys. Chem. Chem. Phys. 2023, 25, 2131−2141), in which we employed simple ground-state (S0) density-related functions from the information-theoretic approach (ITA) to accurately and efficiently evaluate the macromolecular polarizabilities, in this work we aimed to predict the lowest excited-state (S1) polarizabilities. The philosophy is to use density-based functions to depict excited-state polarizabilities. As a proof-of-principle application, employing 2-(2′-hydroxyphenyl)benzimidazole (HBI), its substituents, and some other commonly used ESIPT (excited-state intramolecular proton transfer) fluorophores as model systems, we verified that either with S0 or S1 densities as an input, ITA quantities can be strongly correlated with the excited-state polarizabilities. When transition densities are considered, both S0 and S1 polarizabilities are in good relationships with some ITA quantities. The transferability of the linear regression model is further verified for a series of molecules with little or no similarity to those molecules in the training set. Furthermore, the excitation energies can be predicted based on multivariant linear regression equations of ITA quantities. This study also found that the nature of both the ground-state and excited-state polarizabilities of these species are due to the spatial delocalization of the electron density.

Extending multi-layer energy-based fragment method for excited-state calculations of large covalently bonded fragment systems

Recently, we developed a low-scaling Multi-Layer Energy-Based Fragment (MLEBF) method for accurate excited-state calculations and nonadiabatic dynamics simulations of nonbonded fragment systems. In this work, we extend the MLEBF method to treat covalently bonded fragment ones. The main idea is cutting a target system into many fragments according to chemical properties. Fragments with dangling bonds are first saturated by chemical groups; then, saturated fragments, together with the original fragments without dangling bonds, are grouped into different layers. The accurate total energy expression is formulated with the many-body energy expansion theory, in combination with the inclusion-exclusion principle that is used to delete the contribution of chemical groups introduced to saturate dangling bonds. Specifically, in a two-layer MLEBF model, the photochemically active and inert layers are calculated with high-level and efficient electronic structure methods, respectively. Intralayer and interlayer energies can be truncated at the two- or three-body interaction level. Subsequently, through several systems, including neutral and charged covalently bonded fragment systems, we demonstrate that MLEBF can provide accurate ground- and excited-state energies and gradients. Finally, we realize the structure, conical intersection, and path optimizations by combining our MLEBF program with commercial and free packages, e.g., ASE and SciPy. These developments make MLEBF a practical and reliable tool for studying complex photochemical and photophysical processes of large nonbonded and bonded fragment systems.

Predicting the structures and vibrational spectra of molecular crystals containing large molecules with the generalized energy-based fragmentation approach

The generalized energy-based fragmentation (GEBF) approach under periodic boundary conditions (PBCs) has been developed to facilitate calculations of molecular crystals containing large molecules. The PBC-GEBF approach can help predict structures and properties of molecular crystals at different theory levels by performing molecular quantum chemistry calculations on a series of non-periodic subsystems constructed from the studied systems. A more rigorous formula of the forces on translational vectors of molecular crystals was proposed and implemented, enabling more reliable predictions of crystal structures. Our benchmark results on several typical molecular crystals show that the PBC-GEBF approach could reproduce the forces on atoms and the translational vectors and the optimized crystal structures from the corresponding conventional periodic methods. The improved PBC-GEBF approach is then applied to predict the crystal structures and vibrational spectra of two molecular crystals containing large molecules. The PBC-GEBF approach can provide a satisfactory description on the crystal structure of a molecular crystal containing 312 atoms in a unit cell at density-fitting second-order Møller-Plesset perturbation theory and density functional theory (DFT) levels and the infrared vibrational spectra of another molecular crystal containing 864 atoms in a unit cell at the DFT level. The PBC-GEBF approach is expected to be a promising theoretical tool for electronic structure calculations on molecular crystals containing large molecules.

Divide-and-Conquer Linear-Scaling Quantum Chemical Computations

Fragmentation and embedding schemes are of great importance when applying quantum-chemical calculations to more complex and attractive targets. The divide-and-conquer (DC)-based quantum-chemical model is a fragmentation scheme that can be connected to embedding schemes. This feature article explains several DC-based schemes developed by the authors over the last two decades, which was inspired by the pioneering study of DC self-consistent field (SCF) method by Yang and Lee (J. Chem. Phys. 1995, 103, 5674-5678). First, the theoretical aspects of the DC-based SCF, electron correlation, excited-state, and nuclear orbital methods are described, followed by the two-component relativistic theory, quantum-mechanical molecular dynamics simulation, and the introduction of three programs, including DC-based schemes. Illustrative applications confirmed the accuracy and feasibility of the DC-based schemes.

Efficient and accurate density-based prediction of macromolecular polarizabilities

Accurately and efficiently predicting macromolecules' polarizabilities is an open problem. In this work, we employ a few simple density-based quantities from the information-theoretic approach (ITA) to predict polarizability of proteins. We first build quantitative structure/property relationships between molecular polarizabilities and ITA quantities. We then verify the broad applicability of ITA quantities for polarizability prediction for inorganic, organic, and biological systems with both localized and delocalized electronic structure. As a proof-of-concept application, we predict the molecular polarizabilities of complex proteins. Based on the linear regression equations for 20 natural amino acid residues, 400 dipeptides, and 8000 tripeptides, one then predicts the molecular polarizability of a larger peptide or even a protein once the molecular wavefunction is obtained. Because it is extremely costly to determine the wavefunction for a macromolecule like a protein, we propose to combine the ITA with the linear-scaling generalized energy-based fragmentation (GEBF) method to predict the macromolecular polarizability. In GEBF, the total molecular polarizability is obtained as a linear combination of the corresponding quantities from a series of small subsystems. We can predict them based on the subsystem wavefunction and linear regression equations rather than compute them from the nearly-intractable coupled-perturbed Hartree-Fock or Kohn-Sham equations for the whole macromolecule. Computational results showcase that the GEBF-ITA protocol should be an inexpensive yet accurate theoretical tool for predicting macromolecular polarizabilities.

Treating Polarization Effects in Charged and Polar Bio-Molecules Through Variable Electrostatic Parameters

Polarization plays important roles in charged and hydrogen bonding containing systems. Much effort ranging from the construction of physics-based models to quantum mechanism (QM)-based and machine learning (ML)-assisted models have been devoted to incorporating the polarization effect into the conventional force fields at different levels, such as atomic and coarse grained (CG). The application of polarizable force fields or polarization models was limited by two aspects, namely, computational cost and transferability. Different from physics-based models, no predetermining parameters were required in the QM-based approaches. Taking advantage of both the accuracy of QM calculations and efficiency of molecular mechanism (MM) and ML, polarization effects could be treated more efficiently while maintaining the QM accuracy. The computational cost could be reduced with variable electrostatic parameters, such as the charge, dipole, and electronic dielectric constant with the help of linear scaling fragmentation-based QM calculations and ML models. Polarization and entropy effects on the prediction of partition coefficient of druglike molecules are demonstrated by using both explicit or implicit all-atom molecular dynamics simulations and machine learning-assisted models. Directions and challenges for future development are also envisioned.

Generalized Energy-Based Fragmentation Approach for the Electronic Emission Spectra of Large Systems

The excited-state (ES) geometry optimization and electronic emission (fluorescence and phosphorescence) spectra and the ES vibrational spectra of large systems are great challenges in quantum chemistry. In this work, we develop a generalized energy-based fragmentation (GEBF) approach to compute the localized ES structures and vibrational frequencies of large systems. In this approach, the ES energy derivatives (gradients or Hessians) for a localized ES of a large system can be obtained by combining the ES energy derivatives of the corresponding active subsystems (including local excitation center) and the ground-state energy derivatives of inactive subsystems. Two strategies are adopted to overcome two difficulties from state-classification and state-tracking for treating specific ESs. First, for state-classification, we develop an improved density-based spatial clustering applied with noise algorithm with a modified transition orbital projection (TOP) algorithm, which allow a certain ES energy and energy derivatives of the whole system to be calculated with different ES energies and energy derivatives of active subsystems. Furthermore, we also employ the TOP algorithm for tracking the ESs in their geometry optimizations at the time-dependent density functional theory (TDDFT) level. Then, the GEBF approach is applied to investigate the optimized ES geometries or ES vibrational frequencies for two typical systems. Our results show that the cost-effective GEBF approach can accurately reproduce the TDDFT fluorescence spectra of the cytosine derivative and the experimental phosphorescence spectra of the β-cyclodextrin derivative. The GEBF approach is expected to be routinely applied to investigate the electronic emission spectra of very large systems with local chromophores.

Combined fragment-based machine learning force field with classical force field and its application in the NMR calculations of macromolecules in solutions

We have developed a combined fragment-based machine learning (ML) force field and molecular mechanics (MM) force field for simulating the structures of macromolecules in solutions, and then compute its NMR chemical shifts with the generalized energy-based fragmentation (GEBF) approach at the level of density functional theory (DFT). In this work, we first construct Gaussian approximation potential based on GEBF subsystems of macromolecules for MD simulations and then a GEBF-based neural network (GEBF-NN) with deep potential model for the studied macromolecule. Then, we develop a GEBF-NN/MM force field for macromolecules in solutions by combining the GEBF-NN force field for the solute molecule and ff14SB force field for solvent molecules. Using the GEBF-NN/MM MD simulation to generate snapshot structures of solute/solvent clusters, we then perform the NMR calculations with the GEBF approach at the DFT level to calculate NMR chemical shifts of the solute molecule. Taking a heptamer of oligopyridine-dicarboxamides in chloroform solution as an example, our results show that the GEBF-NN force field is quite accurate for this heptamer by comparing with the reference DFT results. For this heptamer in chloroform solution, both the GEBF-NN/MM and classical MD simulations could lead to helical structures from the same initial extended structure. The GEBF-DFT NMR results indicate that the GEBF-NN/MM force field could lead to more accurate NMR chemical shifts on hydrogen atoms by comparing with the experimental NMR results. Therefore, the GEBF-NN/MM force field could be employed for predicting more accurate dynamical behaviors than the classical force field for complex systems in solutions.

A Density Functional Theory and Information-Theoretic Approach Study of Interaction Energy and Polarizability for Base Pairs and Peptides

Using density functional theory (DFT) and the information-theoretic approach (ITA) quantities to appreciate the energetics and properties of biopolymers is still an unaccomplished and ongoing task. To this end, we studied the building blocks of nucleic acid base pairs and small peptides. For base pairs, we have dissected the relative importance of energetic components by using two energy partition schemes in DFT. Our results convincingly show that the exchange-correlation effect predominantly governs the molecular stability of base pairs while the electrostatic potential plays a minor but indispensable role, and the steric effect is trivial. Furthermore, we have revealed that simple density-based ITA functions are in good relationships with molecular polarizabilities for a series of 30 hydrogen-bonded base pairs and all 20 natural α-amino acids, 400 dipeptides, and 8000 tripeptides. Based on these lines, one can easily predict the molecular polarizabilities of larger peptides, even proteins as long as the total molecular wavefunction is available, rather than solving the computationally demanding coupled-perturbed Hartree–Fock (CPHF) equation or its DFT counterpart coupled-perturbed Kohn–Sham (CPKS) equation.

A double exponential coupled cluster theory in the fragment molecular orbital framework

Fragmentation-based methods enable electronic structure calculations for large chemical systems through partitioning them into smaller fragments. Here, we have developed and benchmarked a dual exponential operator-based coupled cluster theory to account for high-rank electronic correlation of large chemical systems within the fragment molecular orbital (FMO) framework. Upon partitioning the molecular system into several fragments, the zeroth order reference determinants for each fragment and fragment pair are constructed in a self-consistent manner with two-body FMO expansion. The dynamical correlation is induced through a dual exponential ansatz with a set of fragment-specific rank-one and rank-two operators that act on the individual reference determinants. While the single and double excitations for each fragment are included through the conventional rank-one and rank-two cluster operators, the triple excitation space is spanned via the contraction between the cluster operators and a set of rank-two scattering operators over a few optimized fragment-specific occupied and virtual orbitals. Thus, the high-rank dynamical correlation effects within the FMO framework are computed with rank-one and rank-two parametrization of the wave operator, leading to significant reduction in the number of variables and associated computational scaling over the conventional methods. Through a series of pilot numerical applications on various covalent and non-covalently bonded systems, we have shown the quantitative accuracy of the proposed methodology compared to canonical, as well as FMO-based coupled-cluster single double triple. The accuracy of the proposed method is shown to be systematically improvable upon increasing the number of contractible occupied and virtual molecular orbitals employed to simulate triple excitations.

Fragmentation Method for Computing Quantum Mechanics and Molecular Mechanics Gradients for Force Matching: Validation with Hydration Free Energy Predictions Using Adaptive Force Matching

A fragmentation approach referred to as a simple overlapping region method for force matching (SORForM) is presented. SORForM is designed to enable efficient computation of quantum mechanical (QM) forces for large molecules and is validated in the framework of adaptive force matching (AFM) to develop solute models in water. The SORForM method divides a molecule into overlapping QM regions with each region containing a gradient zone and a buffer zone. The buffer zone ensures that the atoms in the gradient zone have their surroundings unchanged with fragmentation. The performance of the method is validated with mefenamic acid and linalyl acetate by comparing the hydration free energies of AFM models developed with and without SORForM. The AFM hydration free energies are also compared with that of the experiments. The models developed with B3LYP-D3(BJ) and def2-TZVP are in excellent agreement with experiments. Our work shows that PBE-D3(BJ) provides less satisfactory results when compared to B3LYP-D3(BJ). The def2-TZVP basis set is found to greatly improve the agreement with experiments when compared to a double-zeta quality basis set.

Structures and properties of ionic crystals and condensed phase ionic liquids predicted with the generalized energy-based fragmentation method

The generalized energy-based fragmentation (GEBF) approach is extended to facilitate ab initio investigations of structures, lattice energies, vibrational spectra and ¹ H NMR chemical shifts of ionic crystals and condensed-phase ionic liquids (ILs) with the periodic boundary conditions (PBC). For selected periodic systems, our results demonstrate that the so-called PBC-GEBF approach can provide satisfactory descriptions on ground-state energies, structures, and vibrational spectra of ionic crystals and IL crystals. The PBC-GEBF approach is then applied to three realistic condensed phase systems. For three ionic crystals (LiCl, NaCl, and KCl), we apply the PBC-GEBF approach with MP2 theory as well as some popular DFT methods to investigate their crystal structures and lattice energies. Our calculations indicate that the crystal structures obtained with PBC-GEBF-MP2/6-311 + G** are very close to the corresponding X-ray structures, while PBC-GEBF-ωB97X-D/6-311 + G** provides satisfactory prediction for crystal structures and lattice energies. For two polymorphs of [n-C₄ mim][Cl] crystals, we find that the PBC-GEBF approach at the M06-2X/6-311 + G** level can give a satisfactory descriptions on structures and Raman spectra of these two crystals. Furthermore, for [C₂ mim][BF₄ ] ILs, we demonstrate that their ¹ H NMR chemical shifts can be estimated from averaging over 5 typical snapshots (extracted from MD simulations) with the PBC-GEBF approach at the B97-2/pcSseg-2 level. The calculated results account for the observed experimental data quite well. Therefore, we expect that the PBC-GEBF approach, combined with various quantum chemistry methods, will become an effective tool in predicting structures and properties of ionic crystals and condensed-phase ILs.

A simple fragment-based method for van der Waals corrections over density functional theory

Modeling intermolecular noncovalent interactions between large molecules remains a challenge for the electron structure theory community due to the high cost. Fragment-based methods usually fare well in reducing the cost...

A General Picture of Cucurbit[8]uril Host-Guest Binding

Describing, understanding, and designing complex interaction networks within macromolecular systems remain challenging in modern chemical research. Host-guest systems, despite their relative simplicity in both the structural feature and interaction patterns, still pose problems in theoretical modeling. The barrel-shaped supramolecular container cucurbit[8]uril (CB8) shows promising functionalities in various areas, e.g., catalysis and molecular recognition. It can stably coordinate a series of structurally diverse guests with high affinities. In this work, we examine the binding of seven commonly abused drugs to the CB8 host, aiming at providing a general picture of CB8-guest binding. Extensive sampling of the configurational space of these host-guest systems is performed, and the binding pathway and interaction patterns of CB8-guest complexes are investigated. A thorough comparison of widely used fixed-charge models for drug-like molecules is presented. Iterative refitting of the atomic charges suggests significant conformation dependence of charge generation. The initial model generated at the original conformation could be inaccurate for new conformations explored during conformational search, and the newly fitted charge set improves the prediction-experiment correlation significantly. Our investigations of the configurational space of CB8-drug complexes suggest that the host-guest interactions are more complex than expected. Despite the structural simplicities of these molecules, the conformational fluctuations of the host and the guest molecules and orientations of functional groups lead to the existence of an ensemble of binding modes. The insights of the binding thermodynamics, performance of fixed-charge models, and binding patterns of the CB8-guest systems are useful for studying and elucidating the binding mechanism of other host-guest complexes.

Mechanistic photophysics and photochemistry of unnatural bases and sunscreen molecules: insights from electronic structure calculations

Photophysics and photochemistry are basic subjects in the study of light-matter interactions and are ubiquitous in diverse fields such as biology, energy, materials, and environment. A full understanding of mechanistic photophysics and photochemistry underpins many recent advances and applications. This contribution first provides a short discussion on the theoretical calculation methods we have used in relevant studies, then we introduce our latest progress on the mechanistic photophysics and photochemistry of two classes of molecular systems, namely unnatural bases and sunscreens. For unnatural bases, we disclose the intrinsic driving forces for the ultrafast population to reactive triplet states, impacts of the position and degree of chalcogen substitutions, and the effects of complex environments. For sunscreen molecules, we reveal the photoprotection mechanisms that dissipate excess photon energy to the surroundings by ultrafast internal conversion to the ground state. Finally, relevant theoretical challenges and outlooks are discussed.

Accelerating the Convergence of Self-Consistent Field Calculations Using the Many-Body Expansion

The balance between cost-effective and sufficiently accurate methods represents the proverbial "promised land" for quantum chemistry calculations. The burden thus falls upon theoretical and computational chemists to provide such alternatives to mitigate the issues that arise from the employ of finite computing resources. In this paper, we attempt to demonstrate the importance of the quality of the initial guess for the self-consistent field (SCF) calculation when considering cost reduction techniques. We broach this challenge by using the many body expansion (MBE) to yield high quality density matrices (DMs) which, in turn, are applied as an SCF initial guess. The MBE-DM approaches combined with purification schemes and distance-based cutoff schemes can serve as initial guesses to reduce the SCF cycles necessary for convergence or derive energy directly through one Fock build. To this end, four unique types of clusters including water clusters, fluoride anion water clusters, sodium cation water clusters, and ammonium-bisulfate salt clusters have been used to test the performance of MBE-DM where its truncation at three-body expansion, MBE(3)-DM, shows vast improvement for those four clusters with reductions in the number of SCF cycles up to 40% as compared with the traditional superposition of atomic densities (SAD) guess. Other types of typical initial guesses, superposition of atomic potentials (SAP) and basis set projection (BSP), perform much worse than MBE-DM and SAD. In addition, the MBE-DM shows consistency across an array of fragment types irrespective of charges, size, level of theory, and basis set selection. Through MBE(3)-DM with the distance cutoff and the average purification scheme, the energy can be obtained directly with a mere 3.2 mH of the mean absolute deviation (MAD) for (H₂O)_N=6-55 which is at least 73 times better than the energy prediction using the typical initial guesses (SAD, SAP, and BSP). The corresponding MAD per monomer is only 0.14 mH which reaches the threshold of the "dynamical accuracy". The promising results of the methods outlined in this paper not only indicate two direct routes for computational cost reduction but also lay the possible foundation for composite techniques (i.e., ab initio sampling) that make best use of near converged values as their starting point.

Computational and data driven molecular material design assisted by low scaling quantum mechanics calculations and machine learning

Electronic structure methods based on quantum mechanics (QM) are widely employed in the computational predictions of the molecular properties and optoelectronic properties of molecular materials. The computational costs of these QM methods, ranging from density functional theory (DFT) or time-dependent DFT (TDDFT) to wave-function theory (WFT), usually increase sharply with the system size, causing the curse of dimensionality and hindering the QM calculations for large sized systems such as long polymer oligomers and complex molecular aggregates. In such cases, in recent years low scaling QM methods and machine learning (ML) techniques have been adopted to reduce the computational costs and thus assist computational and data driven molecular material design. In this review, we illustrated low scaling ground-state and excited-state QM approaches and their applications to long oligomers, self-assembled supramolecular complexes, stimuli-responsive materials, mechanically interlocked molecules, and excited state processes in molecular aggregates. Variable electrostatic parameters were also introduced in the modified force fields with the polarization model. On the basis of QM computational or experimental datasets, several ML algorithms, including explainable models, deep learning, and on-line learning methods, have been employed to predict the molecular energies, forces, electronic structure properties, and optical or electrical properties of materials. It can be conceived that low scaling algorithms with periodic boundary conditions are expected to be further applicable to functional materials, perhaps in combination with machine learning to fast predict the lattice energy, crystal structures, and spectroscopic properties of periodic functional materials.

Building quantum mechanics quality force fields of proteins with the generalized energy-based fragmentation approach and machine learning

We combined our generalized energy-based fragmentation (GEBF) approach and machine learning (ML) technique to construct quantum mechanics (QM) quality force fields for proteins. In our scheme, the training sets for a protein are only constructed from its small subsystems, which capture all short-range interactions in the target system. The energy of a given protein is expressed as the summation of atomic contributions from QM calculations of various subsystems, corrected by long-range Coulomb and van der Waals interactions. With the Gaussian approximation potential (GAP) method, our protocol can automatically generate training sets with high efficiency. To facilitate the construction of training sets for proteins, we store all trained subsystem data in a library. If subsystems in the library are detected in a new protein, corresponding datasets can be directly reused as a part of the training set on this new protein. With two polypeptides, 4ZNN and 1XQ8 segment, as examples, the energies and forces predicted by GEBF-GAP are in good agreement with those from conventional QM calculations, and dihedral angle distributions from GEBF-GAP molecular dynamics (MD) simulations can also well reproduce those from ab initio MD simulations. In addition, with the training set generated from GEBF-GAP, we also demonstrate that GEBF-ML force fields constructed by neural network (NN) methods can also show QM quality. Therefore, the present work provides an efficient and systematic way to build QM quality force fields for biological systems.

A unified and flexible formulation of molecular fragmentation schemes

We present a flexible formulation for energy-based molecular fragmentation schemes. This framework does not only incorporate the majority of existing fragmentation expansions but also allows for flexible formulation of novel schemes. We further illustrate its application in multi-level approaches and for electronic interaction energies. For the examples of small water clusters, a small protein, and protein-protein interaction energies, we show how this flexible setup can be exploited to generate a well-suited multi-level fragmentation expansion for the given case. With such a setup, we reproduce the electronic protein-protein interaction energy of ten different structures of a neurotensin and an extracellular loop of its receptor with a mean absolute deviation to the respective super-system calculations below 1 kJ/mol.

Generalized energy-based fragmentation approach for calculations of solvation energies of large systems

A generalized energy-based fragmentation (GEBF) approach has been combined with a universal solvation model based on solute electron density (SMD) to compute the solvation energies of general large systems (such as protein molecules) in solutions. In the GEBF-SMD method, the solvation energy of a target system could be combined by the corresponding solvation energies of various subsystems, each of which is embedded in the background point charges and surface charges on the surface of solute cavity at the positions of its atoms and neighbouring atoms outside of the subsystem. Our results show that the GEBF-SMD model could reproduce the conventional SMD solvation energies quite well for various proteins in solutions, and could significantly reduce the computational costs for the SMD calculations of large proteins. In addition, the GEBF-SMD approach is almost independent of the basis sets and the types of solvents (including protic, polar, and nonpolar ones). Also, the GEBF-SMD approach could reproduce the relative energies of various conformers of large systems in solutions. Therefore, the GEBF-SMD method is expected to be applicable for computing the solvation energies of a broad range of large systems.

iOI: An Iterative Orbital Interaction Approach for Solving the Self-Consistent Field Problem

An iterative orbital interaction (iOI) approach is proposed to solve, in a bottom-up fashion, the self-consistent field problem in quantum chemistry. While it belongs grossly to the family of fragment-based quantum chemical methods, iOI is distinctive in that (1) it divides and conquers not only the energy but also the wave function and that (2) the subsystem sizes are automatically determined by successively merging neighboring small subsystems until they are just enough for converging the wave function to a given accuracy. Orthonormal occupied and virtual localized molecular orbitals are obtained in a natural manner, which can be used for all post-SCF purposes.

Multiscale Quantum Refinement Approaches for Metalloproteins

Biomolecules with metal ion(s) (e.g., metalloproteins) play many important biological roles. However, accurate structural determination of metalloproteins, particularly those containing transition metal ion(s), is challenging due to their complicated electronic structure, complex bonding of metal ions, and high number of conformations in biomolecules. Quantum refinement, which was proposed to combine crystallographic data with computational chemistry methods by several groups, can improve the local structures of some proteins. In this study, a quantum refinement method combining several multiscale computational schemes with experimental (X-ray diffraction) information was developed for metalloproteins. Various quantum refinement approaches using different ONIOM (our own N-layered integrated molecular orbital and molecular mechanics) combinations of quantum mechanics (QM), semiempirical (SE), and molecular mechanics (MM) methods were conducted to assess the performance and reliability on the refined local structure in two metalloproteins. The structures for two (Cu- or Zn-containing) metalloproteins were refined by combining two-layer ONIOM2(QM1/QM2) and ONIOM2(QM/MM) and three-layer ONIOM3(QM1/QM2/MM) schemes with experimental data. The accuracy of the quantum-refined metal binding sites was also examined and compared in these multiscale quantum refinement calculations. ONIOM3(QM/SE/MM) schemes were found to give good results with lower computational costs and were proposed to be a good choice for the multiscale computational scheme for quantum refinement calculations of metal binding site(s) in metalloproteins with high efficiency. Additionally, a two-center ONIOM approach was employed to speed up the quantum refinement calculations for the Zn metalloprotein with two remote active sites/ligands. Moreover, a recent quantum-embedding wavefunction-in-density functional theory (WF-in-DFT) method was also adopted as the high-level method in unprecedented ONIOM2(CCSD-in-B3LYP/MM) and ONIOM3(CCSD-in-B3LYP/SE/MM) calculations, which can be regarded as novel pseudo-three- and pseudo-four-layer ONIOM methods, respectively, to refine the key Zn binding site at the coupled-cluster singles and doubles (CCSD) level. These refined results indicate that multiscale quantum refinement schemes can be used to improve the structural accuracy obtained for local metal binding site(s) in metalloproteins with high efficiency.

Electrostatically embedded molecules-in-molecules approach and its application to molecular clusters

We report the application of our fragment-based quantum chemistry model MIM (Molecules-In-Molecules) with electrostatic embedding. The method is termed "EE-MIM (Electrostatically Embedded Molecules-In-Molecules)" and accounts for the missing electrostatic interactions in the subsystems resulting from fragmentation. Point charges placed at the atomic positions are used to represent the interaction of each subsystem with the rest of the molecule with minimal increase in the computational cost. We have carefully calibrated this model on a range of different sizes of clusters containing up to 57 water molecules. The fragmentation methods have been applied with the goal of reproducing the unfragmented total energy at the MP2/6-311G(d,p) level. Comparative analysis has been carried out between MIM and EE-MIM to gauge the impact of electrostatic embedding. Performance of several different parameters such as the type of charge and levels of fragmentation are analyzed for the prediction of absolute energies. The use of background charges in subsystem calculations improves the performance of both one- and two-layer MIM while it is noticeably important in the case of one-layer MIM. Embedded charges for two-layer MIM are obtained from a full system calculation at the low-level. For one-layer MIM, in the absence of a full system calculation, two different types of embedded charges, namely, Geometry dependent (GD) and geometry independent (GI) charges, are used. A self-consistent procedure is employed to obtain GD charges. We have further tested our method on challenging charged systems with stronger intermolecular interactions, namely, protonated ammonia clusters (containing up to 30 ammonia molecules). The observations are similar to water clusters with improved performance using embedded charges. Overall, the performance of NPA charges as embedded charges is found to be the best.

Energy-based automatic determination of buffer region in the divide-and-conquer second-order Møller-Plesset perturbation theory

In the linear‐scaling divide‐and‐conquer (DC) electronic structure method, each subsystem is calculated together with the neighboring buffer region, the size of which affects the energy error introduced by the fragmentation in the DC method. The DC self‐consistent field calculation utilizes a scheme to automatically determine the appropriate buffer region that is as compact as possible for reducing the computational time while maintaining acceptable accuracy (J. Comput. Chem. 2018, 39, 909). To extend the automatic determination scheme of the buffer region to the DC second‐order Møller–Plesset perturbation (MP2) calculation, a scheme for estimating the subsystem MP2 correlation energy contribution from each atom in the buffer region is proposed. The estimation is based on the atomic orbital Laplace MP2 formalism. Based on this, an automatic buffer determination scheme for the DC‐MP2 calculation is constructed and its performance for several types of systems is assessed.

Systematic Partitioning of Proteins for Quantum-Chemical Fragmentation Methods Using Graph Algorithms

Quantum-chemical fragmentation methods offer an efficient approach for the treatment of large proteins, in particular if local target quantities such as protein-ligand interaction energies, enzymatic reaction energies, or spectroscopic properties of embedded chromophores are sought. However, the accuracy that is achievable for such local target quantities intricately depends on how the protein is partitioned into smaller fragments. While the commonly employed naı̈ve approach of using fragments with a fixed size is widely used, it can result in large and unpredictable errors when varying the fragment size. Here, we present a systematic partitioning scheme that aims at minimizing the fragmentation error of a local target quantity for a given maximum fragment size. To this end, we construct a weighted graph representation of the protein, in which the amino acids constitute the nodes. These nodes are connected by edges weighted with an estimate for the fragmentation error that is expected when cutting this edge. This allows us to employ graph partitioning algorithms provided by computer science to determine near-optimal partitions of the protein. We apply this scheme to a test set of six proteins representing various prototypical applications of quantum-chemical fragmentation methods using a simplified molecular fractionation with conjugate caps (MFCC) approach with hydrogen caps. We show that our graph-based scheme consistently improves upon the naı̈ve approach.

Accuracy of DLPNO-CCSD(T): Effect of Basis Set and System Size

The DLPNO-CCSD(T) method is designed to study large molecular systems at significantly reduced cost relative to its canonical counterpart. However, the error in this approach is also size-extensive and relies on cancellation of errors for the calculation of relative energies. This work provides a direct comparison of canonical CCSD(T) and TightPNO DLPNO-CCSD(T) calculations of reaction energies and barriers of a broad range of chemical reactions. The dataset includes acidities, anion binding affinities, enolization, Diels-Alder, nucleophilic substitution, and atom transfer reactions and complements existing theoretical datasets in terms of system size as well as new reaction types (e.g., anion binding affinities and chlorine atom transfer reactions). The performance of DLPNO-CCSD(T) was further examined with respect to systematic variation of basis set and system size and amounts of nonbonded interaction present in the system. The errors in the DLPNO-CCSD(T) were found to be relatively insensitive to the choice of basis set for small systems but increase monotonically with system size. Additionally, calculations of barriers appear to be more challenging than reaction energies with errors exceeding 5 kJ mol^-1 for many Diels-Alder reactions. Further tests on three realistic organic reactions reveal the impact of the DLPNO approximation in calculating absolute and relative barriers that are important for predictions such as stereoselectivity.

Structures and Spectroscopic Properties of Large Molecules and Condensed-Phase Systems Predicted by Generalized Energy-Based Fragmentation Approach

ConspectusThe structures and spectroscopic properties of molecules and condensed-phase systems are usually experimentally characterized by X-ray, infrared (IR), Raman, nuclear magnetic resonance (NMR), and electronic absorption/emission spectra. Quantum mechanics (QM) calculations are critical in quantitatively understanding the relationship between the structure and physicochemical properties of various chemical systems. However, it is very challenging to apply traditional QM methods to large molecules and condensed-phase systems with large unit cells due to their steep computational scaling with the system size. To overcome this difficulty, theoretical chemists have developed various linear (or low) scaling QM methods, among which energy-based fragmentation methods have achieved great success for large molecules or clusters. One of the most popular energy-based fragmentation methods is the generalized energy-based fragmentation (GEBF) approach developed by us.In this approach, the ground-state energy of a large molecule can be evaluated from the ground-state energies of a series of embedded subsystems. In this Account, we focus on the recent developments and applicability of the GEBF approach for the structures and spectroscopic properties of complicated large molecules and condensed-phase systems. With new fragmentation schemes, the GEBF approach can now describe ionic liquid clusters and metal-containing supramolecular systems accurately and can provide accurate binding energies for host-guest complexes. In addition, the GEBF approach is now available for describing the localized excited states of large systems including a chromophore. More importantly, the GEBF approach under periodic boundary conditions (PBC-GEBF) has been developed to deal with periodic molecular crystals and liquids. Then, the ground-state energy (or property) per unit cell of a periodic condensed phase system can be predicted with QM calculations on nonperiodic embedded subsystems. This feature enables accurate electron correlation calculations on molecular crystals and liquids to be feasible on ordinary workstations. The PBC-GEBF approach has been applied to predict the crystal structures, lattice energies, and spectroscopic properties of some typical molecular crystals and solutions. By combining the GEBF method and machine learning (ML) method, a GEBF-ML force field has been developed for long normal alkanes, and the IR spectra of long alkanes can be obtained from the GEBF-ML molecular dynamics (MD) simulations. The GEBF and its periodic variant are expected to play increasingly important roles in investigating real-life chemical systems of broad interests at the ab initio levels.

Dividing the Periodic Box into Subdivisions with Their Surroundings to Accelerate Molecular Dynamics Simulation with High Accuracy

A major field of current research in chemistry and biology is the development of the tools that enable in situ analysis of complex systems. However, the long-time dynamics simulation for an extremely large system in solution is almost impossible by an all-atom force field combined with an explicit solvent model. The results show that the larger the periodic box is, the closer the properties of the system are to the experimental values. Therefore, how can we carry out simulations for systems that are fast, accurate, and large enough? A method of dividing the periodic box into subdivisions with their surroundings (DBSS) is presented here, and it clearly increases the computation speed without losing accuracy and enables the simulation of extremely large systems by strongly decreasing the dimension of the charge matrix. The DBSS method divides a single periodic box or unit in an extremely large system into several subdivisions with a suitable choice according to atomic coordinates. This method ensures that these subdivisions are always changing and allows the atoms to communicate with each other. Intermolecular communication is important for molecular properties and functions but is not possible with other fragment methods. The partial charges are calculated in each subdivision with an overlapping surrounding used to take hydrogen bond interaction between the subdivisions into account. This is an iterative process because the charge population will be recalculated at intervals during the dynamics simulations. Taking a water system as an example, each subdivision is extended by 4 Å as the surrounding. The computation time scales almost linearly with the size of the system, and the slope is small. MD simulations for several properties have been performed by the ABEEM-DBSS method. The results indicate that the ABEEM-DBSS method can accurately simulate the properties of water system, and the accuracy can reach or approach that of the experimental data or of other water potentials. Interestingly, the properties become closer to the experimental data as the sizes of the periodic box increase, further validating the need for the simulation of a large system and demonstrating the value of the DBSS method.

A quantum biochemistry investigation of the protein-protein interactions for the description of allosteric modulation on biomass-degrading chimera

The worldwide dependence of population on fossil fuels continues to have several harmful implications for the environment. Bioethanol is an excellent option for renewable fuel to replace the current greenhouse gas emitters. In addition, its production by enzymatic route has gained space among the industrial processes because it replaces the traditional acid treatment. Due to its high versatility, the xylanase family is used in this process as an accessory enzyme for degrading the lignocellulosic substrate of biomass. A chimera built by a xylanolytic domain (Xyl) and a xylose-binding protein (XBP) showed an experimentally improved catalytic efficiency and interdomain allosteric modulation after xylose binding. In this context, we performed a quantum biochemistry characterization of the interactions between these domains and dynamic cross-correlation (DCC) analysis after performing molecular dynamics (DM) simulations of the systems in the presence and absence of xylose in the XBP active site. We used the density functional theory (DFT) within the molecular fractionation with the conjugated caps (MFCC) approach to describe the pair energies, and the corresponding energy difference between the chimera domains responsible for the allosteric effect and amino acid DCC to evaluate the interdomain coupling differences between the energy states. The detailed energetic investigation together with the related structural and dynamics counterparts revealed the molecular mechanisms of chimeric improvement of the xylanase activity observed experimentally. This mechanism was correlated with greater stability and high connectivity at the interdomain interface in the xylose bound relative to the free chimera. We identify the contributions of hydrogen bonds, hydrophobic interactions and water-mediated interactions in the interdomain region responsible for stability together with the structural and dynamical elements related to the allosteric effect. Taken together, these observations led to a comprehensive understanding of the chimera's modulatory action that occurs through the formation of a highly connected interface that makes the essential movements related to xylanolytic activity in xylanase correlated to those of the xylose-binding protein.

Formulation of a Dressed Coupled-Cluster Method with Implicit Triple Excitations and Benchmark Application to Hydrogen-Bonded Systems

In this paper, we present a coupled-cluster theory based on a double-exponential wave operator ansatz, which is capable of mimicking the effects of connected triple excitations in an iterative manner. The triply excited manifold is spanned via the action of a set of scattering operators on doubly excited determinants, whereas their action annihilates the Hartree-Fock reference determinant. The effect of triple excitations is included at a computational scaling slightly higher than that of conventional coupled-cluster singles and doubles. Furthermore, we demonstrate two approximate schemes, which arise naturally, and argue that both these schemes come equipped with certain renormalization terms capable of handling nonbonding interactions due to robust inclusion of the screened Coulomb interaction. We justify our claims from both a theoretical perspective and a number of numerical applications to prototypical water clusters, in a number of basis functions. Our methods show overall comparable performance to the canonical coupled-cluster theory with singles, doubles, and perturbative triples (CCSD(T)) and allied methods, however, at a lower computational scaling.

Simulating Large Quantum Circuits on a Small Quantum Computer

Limited quantum memory is one of the most important constraints for near-term quantum devices. Understanding whether a small quantum computer can simulate a larger quantum system, or execute an algorithm requiring more qubits than available, is both of theoretical and practical importance. In this Letter, we introduce cluster parameters K and d of a quantum circuit. The tensor network of such a circuit can be decomposed into clusters of size at most d with at most K qubits of inter-cluster quantum communication. We propose a cluster simulation scheme that can simulate any (K,d)-clustered quantum circuit on a d-qubit machine in time roughly 2^{O(K)}, with further speedups possible when taking more fine-grained circuit structure into account. We show how our scheme can be used to simulate clustered quantum systems-such as large molecules-that can be partitioned into multiple significantly smaller clusters with weak interactions among them. By using a suitable clustered ansatz, we also experimentally demonstrate that a quantum variational eigensolver can still achieve the desired performance for estimating the energy of the BeH_{2} molecule while running on a physical quantum device with half the number of required qubits.