Templating Mesoporous Silica with Chiral Block Copolymers and Its Application for Enantioselective Separation

Enhanced Replenishment of Active Lattice Oxygen Using Chiral Copper Oxide

Effective catalytic performance of the transition metal oxide is attributed to high specific surface areas, abundant surface oxygen atoms, and balanced valence ratios. Although the chirality of the transition metal has attracted attention, most studies have focused on optical application. A few chiral transition metal oxides were used as electrocatalysts and photocatalysts. The influence of the chiral catalysts on the thermal catalysis process has been less explored. In this study, Mn-loaded chiral (M/l-CuO and M/d-CuO) and achiral CuO (M/a-CuO) were synthesized and compared in the catalytic oxidization of toluene. Spectrally analyzed Mn was well-dispersed on both chiral and achiral CuO. l-CuO and d-CuO showed nanoflower-like chirality. The angles between each (001) plane of CuO were the source of chirality. The toluene turnover frequency (TOF) of the samples was in the order of Mn/d-CuO (5.6 × 10-5 s-1) > Mn/l-CuO (4.4 × 10-5 s-1) > Mn/a-CuO (3.2 × 10-5 s-1) at 240 °C, consistent with the order of the oxygen replenishment rate. The as-prepared catalysts had similar ratios of lattice oxygen/surface adsorbed oxygen, Mn3+/Mn4+, and Cu+/Cu2+. A higher TOF was attributed to chirality, which increased the lattice oxygen replenishment speed from the gaseous phase to the solid surface. Our study indicates gas-solid catalysis from a structure-activity viewpoint.

Polymeric Carbon Nitride with Chirality Inherited from Supramolecular Assemblies

The facile synthesis of chiral materials is of paramount importance for various applications. Supramolecular preorganization of monomers for thermal polymerization has been proven as an effective tool to synthesize carbon and carbon nitride-based (CN) materials with ordered morphology and controlled properties. However, the transfer of an intrinsic chemical property, such as chirality from supramolecular assemblies to the final material after thermal condensation, was not shown. Here, we report the large-scale synthesis of chiral CN materials capable of enantioselective recognition. To achieve this, we designed supramolecular assemblies with a chiral center that remains intact at elevated temperatures. The optimized chiral CN demonstrates an enantiomeric preference of ca. 14 %; CN electrodes were also prepared and show stereoselective interactions with enantiomeric probes in electrochemical measurements. By adding chirality to the properties transferrable from monomers to the final product of a thermal polymerization, this study confirms the potential of using supramolecular precursors to produce carbon and CN materials and electrodes with designed chemical properties.

Organocatalytic chiral polymeric nanoparticles for asymmetric aldol reaction

Chiral polymeric particles (CPPs) were studied extensively in recent years due to their importance in pharmaceutical applications. Here, nanosized CPPs were synthesized and applied as catalysts for direct asymmetric aldol reaction. The CPPs were prepared by miniemulsion or inverse miniemulsion based on various chiral amino acid derivatives and characterized by dynamic light scattering and scanning electron microscopy. The nanoparticles with spherical structure between 250 and 400 nm and high chiral surface area were used as catalysts in the aldol reaction at room temperature without additional solvent. l-tryptophan gave the highest enantiomeric excess, >86% with similar catalytic performance four times.

Chiral mesostructured hydroxide zinc carbonate for enantioseparation in high performance liquid chromatography

Chiral mesostructured hydroxide zinc carbonate coated silica gel (CMHZC@S) was prepared by a hydrothermal route using amino acids as symmetry-breaking agents. CMHZC@S with three levels of hierarchical chiralities, as a chiral stationary phase (CSP), showed enantiomeric separation ability for high performance liquid chromatography (HPLC).

Magnetic Molecularly Imprinted Polymers Based on Dehydroabietylamine as Chiral Monomers for the Enantioseparation of RS-Mandelic Acid

Stereoselective adsorption of the enantiomers shows potential in the resolution of a racemate. In this work, we synthesized novel magnetic surface molecularly imprinted polymers (MIPs) on the surface of the γ-methacryloxypropyltrimethoxysilane (MPS)-modified Fe₃O₄@SiO₂ particles to utilize chiral dehydroabietylamine (DHA) as a functional monomer and R-mandelic acid as a template molecule (DHA-MIPs). We performed the resolution of mandelic acid racemate (RS-MA) via adsorption on the as-prepared MIPs. The results revealed that the MIPs have good affinity and high adsorption capacity for R-MA and show better enantioselective adsorption ability for R-MA than that for S-MA. One-stage adsorption of RS-MA on the MIPs can achieve up to 53.7% enantiomeric excess (ee) for R-MA. These help us to improve the chiral separation ability of the traditional MIPs using a chiral rather than an achiral monomer in MIP preparation. The MIPs can be employed as an economic and efficient adsorbent for chiral separation of MA racemate.

Toward Efficient Synthesis of Porous All-Carbon-Based Nanocomposites for Enantiospecific Separation

Chiral separation and asymmetric synthesis and catalysis are crucial processes for obtaining enantiopure compounds, which are especially important in the pharmaceutical industry. The efficiency of the separation processes is readily increased by using porous materials as the active material can interact with a larger surface area. Silica, metal-organic frameworks, or chiral polymers are versatile porous materials that are established in chiral applications, but their instability under certain conditions in some cases requires the use of more stable porous materials such as carbons. In addition to their stability, porous carbon materials can be tailored for their ability to adsorb and catalytically activate different chemical compounds from the liquid and the gas phase. The difficulties imposed by the functionalization of carbons with chiral species were tackled in the past by carbonizing chiral ionic liquids (CILs) together with a template to create pores, which results in the entire body of a material that is built up from the precursor. To increase the atomic efficiency of ionic liquids for better economic utilization of CILs, the approach presented here is based on the formation of a composite between CIL-derived chiral carbon and a pristine carbon material obtained from carbohydrate precursors. Two novel enantioselective carbon composite materials are applied for the chiral recognition of molecules in the gas phase, as well as in solution. The enantiomeric ratio of the l-composite for phenylalanine from the solution was (L/D) = 8.4, and for 2-butanol from the gas phase, it was (S/R) = 1.3. The d-composite showed an opposite behavior, where the enantiomeric ratio for phenylalanine was (D/L) = 2.7, and for 2-butanol from the gas phase, it was (R/S) = 1.3.

Amino acid-based ionic liquids as precursors for the synthesis of chiral nanoporous carbons

The synthesis of chiral nanoporous carbons based on chiral ionic liquids (CILs) of amino acids as precursors is described. Such unique precursors for the carbonization of CILs yield chiral carbonaceous materials with high surface area (≈620 m2 g-1). The enantioselectivities of the porous carbons are examined by advanced techniques such as selective adsorption of enantiomers using cyclic voltammetry, isothermal titration calorimetry, and mass spectrometry. These techniques demonstrate the chiral nature and high enantioselectivity of the chiral carbon materials. Overall, we believe that the novel approach presented here can contribute significantly to the development of new chiral carbon materials that will find important applications in chiral chemistry, such as in chiral catalysis and separation and in chiral sensors. From a scientific point of view, the approach and results reported here can significantly deepen our understanding of chirality at the nanoscale and of the structure and nature of chiral nonporous materials and surfaces.

Unusual chirality transfer from silica to metallic nanoparticles with formation of distorted atomic array in crystal lattice structure

Transfer of chirality from chiral organic molecules to metallic nanoparticles (NPs) is a very attractive field of research and some unique approaches to obtaining chiral metallic NPs have been developed. However, to date, there has been no report in the literature that the chiral information of silica can be transferred into metallic NPs. In this work, a new chirality transfer system to metallic NPs from chiral silica has been achieved. The chiral transfer was performed by simple two steps: (1) trapping metal cations of silver (Ag) and gold (Au) in chiral silica of nano fibrous bundles embedding poly(ethyleneimine) inside and (2) thermoreducing the metal ions into metallic NPs. The metallic NPs of Au and Ag grown around a silica frame, using a thermo-reduction (calcination) process, showed a spherical shape with a size of about 30 nm. Interestingly, the metallic NPs detached or isolated from the silica via crushing and/or hydrolysis of the silica showed remarkable circular dichroism activity in their plasmon absorption band with an exciton coupling feature. Using an atomic resolution scanning transmission protocol, it was found that the chiral metallic NPs have a definite distortion in the atomic array in their crystal lattice structures. In comparison, achiral metallic NPs, which were prepared using a similar method around achiral silica bundles, showed a precisely ordered atomic line without distortion.

Thermo-responsive recoverable polymeric inhibitors for the resolution of racemic amino acids

Novel polymeric inhibitors with lower critical solution temperatures in water were prepared and used to mediate the crystallization of racemic asparagine monohydrate, leading to chiral separation with 88.6 ee%. They could be recollected by simply elevating the temperature with a high yield of around 95% and reused without compromising the stereoselectivity and stability.

Chiral templating of alumina nanofilms by the atomic layer deposition process

In this communication, we describe the synthesis of new chiral alumina nanofilms and surfaces. Our method is based on chiral templating of alumina nanofilms by cellulose microfibers using the atomic layer deposition process. The chiral nature of the alumina nanofilms was characterized by a variety of techniques, such as quartz crystal microbalance, chiral circular-dichroism adsorption, chiral high-performance liquid chromatography and cyclic voltammetry measurements.

Imprinting Chirality in Silica Nanotubes by N-Stearoyl-serine Template

In this article, we describe the synthesis of imprinted chiral silica nanotubes based on the use of a chiral N-stearoyl l-serine (C18Ser) anionic surfactant as the chiral template. The resulting chiral silica nanotube structures were characterized by electronic microscopy (transmission electron microscopy (TEM) and scanning electron microscopy (SEM)) and nitrogen isotherms that proved the formation of well-ordered silica nanotubes. A C18Ser surfactant template was used for the preparation of the silica nanotubes, due to its effective molecular organization within the silica network. After chemical extraction of the chiral template, the enantioselectivity feature of the silica nanotubes was confirmed by selective adsorption of the enantiomers using circular dichroism (CD) and isothermal titration calorimetry (ITC) measurements. Although these measurements show a relatively low chiral selectivity of the silica nanotubes (ca. 6% enantiomeric excess), the system described here offers new approaches for the application of chiral porous materials in chirality.

Preparation of imprinted cryogel cartridge for chiral separation of l-phenylalanine

l-Phe-imprinted cryogel cartridge was prepared for the chiral separation of l-Phe. N-Methacryloyl l-phenylalanine (MAPA) was used as a functional monomer for complexing with l-Phe. The selectivity of the membranes was investigated by using d-Phe, l-Trp, and d-Trp as competitor molecules. The PHEMAPA-l-Trp membranes were 6.4, 4.3, and 5.5 times more selective for l-Phe than d-Phe, l-Trp, and d-Trp, respectively. The PHEMAPA-l-Phe cryogel cartridge was incorporated into the fast protein liquid chromatography (FPLC) equipment and was able to separate D,l-Phe racemic mixture efficiently. The PHEMAPA-l-Phe membranes were shown to be reusable many times without significant loss of the adsorption capacity.

Phase behaviour of PMMA-b-PHEMA with solvents methanol and THF: modelling and comparison to the experiment

Self-consistent field theory is used to model the self-assembly of a symmetric PMMA-block-PHEMA in the presence of two solvents, methanol and tetrahydrofuran (THF). The model predictions are compared to our experimental results of solvent-vapour annealing of thin polymer films, where the sequence of cylinder to gyroid (or micelles) to lamellar phases was found upon increasing the methanol-THF ratio and for particular extents of film swelling. The Hansen solubility parameters are used to estimate the Flory-Huggins interaction parameters (χ) needed in the theoretical model. However, because enacting the experimental range of high (χ)N values is computationally prohibitive, the use of moderate (χ)N values is compensated by employing larger values of the solvent-to-polymer size ratio (α). This approach is validated by showing that the predicted phase diagrams exhibit qualitatively similar trends whether (χ)N or α is increased. Using such an approach, the theory predicts a cylinder to gyroid to lamellar transition on increasing the THF-methanol ratio, a trend consistent with that observed in the experiments.

Chiral gold nanowires with Boerdijk-Coxeter-Bernal structure

A Boerdijk-Coxeter-Bernal (BCB) helix is made of linearly stacked regular tetrahedra (tetrahelix). As such, it is chiral without nontrivial translational or rotational symmetries. We demonstrate here an example of the chiral BCB structure made of totally symmetrical gold atoms, created in nanowires by direct chemical synthesis. Detailed study by high-resolution electron microscopy illustrates their elegant chiral structure and the unique one-dimensional "pseudo-periodicity". The BCB-type atomic packing mode is proposed to be a result of the competition and compromise between the lattice and surface energy.

Stereoselective adsorption utilizing l-phenylalanine imprinting chiral ordered mesoporous silica

l-Phenylalanine imprinting chiral ordered mesoporous silica (l-Phe-COMS) was endowed with unique structural features, showing a high stereoselective adsorption factor of up to 3.24 for l-phenylalanine over d-phenylalanine.

Capture, enrichment, and mass spectrometric detection of low-molecular-weight biomarkers with nanoporous silicon microparticles

Mining the disease information contained in the low-molecular-weight range of a proteomic profile is becoming of increasing interest in cancer research. This work evaluates the ability of nanoporous silicon microparticles (NPSMPs) to capture, enrich, protect, and detect low-molecular-weight peptides (LMWPs) sieved from a pool of highly abundant plasma proteins. The average pore size and porosity of NPSMPs are controlled by the electrochemical preparation conditions, and the critical parameters for admission or exclusion of protein with a definite molecular weight are determined by reflectometric-interference Fourier transform spectroscopy (RIFTS). Sodium dodecyl sulfate polyacrylamide-gel electrophoresis (SDS-PAGE) and matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) analysis of the proteins captured by the NPSMPs show that the chemical nature of the NPSMPs surface and the solution pH also play vital roles in determining the affinity of NPSMPs for target analytes. It is found that carboxyl-terminated porous microparticles with a porosity of 26% (pore diameter around 9.0 nm) specifically fractionate, enrich and protect LMWPs sieved from either simulated samples or human serum samples. Moreover, NPSMPs containing captured peptides can be directly spotted onto a MALDI plate. When placed in a conventional MALDI matrix, laser irradiation of the particles results in the release of the target peptides confined in the nanopores, which are then ionized and detected in the MALDI experiment. As a proof-of-principle test case, mass spectra of NPSMPs prepared using serum from colorectal cancer patients and from control patients can be clearly distinguished by statistical analysis. The work demonstrates the utility of the method for discovery of biomarkers in the untapped LMWP fraction of human serum, which can be of significant value in the early diagnosis and management of diseases.

Silicon, silica and its surface patterning/activation with alkoxy- and amino-silanes for nanomedical applications

Silica and silicates are widely used in nanomedicine with applications as diverse as medical device coatings to replacement materials in tissue engineering. Although much is known about silica and its synthesis, relatively few biomedical scientists fully appreciate the link that exists between its formulation and its resultant structure and function. This article attempts to provide insight into relevant issues in that context, as well as highlighting their importance in the material’s eventual surface patterning/activation with alkoxy- and organo-silanes. The use of aminosilanes in that context is discussed at some length to permit an understanding of the specific variables that are important in the reproducible and robust aminoactivation of surfaces using such molecules. Recent investigative work is cited to underline the fact that although aminosilanization is a historically accepted mechanism for surface activation, there is still much to be explained about how and why the process works in the way it does. In the last section of this article, there is a detailed discussion of two classical approaches for the use of aminosilanized materials in the covalent immobilization of bioligands, amino-aldehyde and amino-carboxyl coupling. In the former case, the use of the homobifunctional coupler glutaraldehyde is explored, and in the latter, carbodiimides. Although these chemistries have long been employed in bioconjugations, it is apparent that there are still variables to be explored in the processes (as witnessed by continuing investigations into the chemistries concerned). Aspects regarding optimization, standardization and reproducibility of the fabrication of amino functionalized surfaces are discussed in detail and illustrated with practical examples to aid the reader in their own studies, in terms of considerations to be taken into account when producing such materials. Finally, the article attempts to remind readers that although the chemistry and materials involved are ‘old hat’, there is still much to be learnt about the methods involved. The article also reminds readers that although many highly specific and costly conjugation chemistries now exist for bioligands, there still remains a place for these relatively simple and cost-effective approaches in bioligand conjugate fabrication.

Enantioselectively controlled release of chiral drug (metoprolol) using chiral mesoporous silica materials

Chiral porous materials have attracted burgeoning attention on account of their potential applications in many areas, such as enantioseparation, chiral catalysis, chemical sensors and drug delivery. In this report, chiral mesoporous silica (CMS) materials with various pore sizes and structures were prepared using conventional achiral templates (other than chiral surfactant) and a chiral cobalt complex as co-template. The synthesized CMS materials were characterized by x-ray diffraction, nitrogen physisorption, scanning electron microscope and transmission electron microscope. These CMS materials, as carriers, were demonstrated to be able to control the enantioselective release of a representative chiral drug (metoprolol). The release kinetics, as modeled by the power law equation, suggested that the release profiles of metoprolol were remarkably dependent on the pore diameter and pore structure of CMS materials. More importantly, R- and S-enantiomers of metoprolol exhibited different release kinetics on CMS compared to the corresponding achiral mesoporous silica (ACMS), attributable to the existence of local chirality on the pore wall surface of CMS materials. The chirality of CMS materials on a molecular level was further substantiated by vibrational circular dichroism measurements.

Enantioselective separation using chiral mesoporous spherical silica prepared by templating of chiral block copolymers

In this work, we synthesized chiral mesoporous silica (CMS) spheres, which can be used as a potential candidate for chiral separation. The CMS spheres with controllable pore sizes (of 2-3 nm) and high surface areas of ca. 614 m(2) g(-1) were synthesized by chiral templating with chiral block copolymers based on poly(ethylene oxide) and dl-glutamic acid [PEO(113)-b-(GluA)(10)]. The ordered structure of the chiral mesopores was characterized by high-resolution transmission electron microscopy, and the average pore diameters of chiral mesopores were estimated from the nitrogen adsorption-desorption measurements. The enantioselectivity properties and chiral resolution kinetics of the mesopores of silica spheres, after extraction of chiral polymers of PEO(113)-b-(l/d-GluA)(10), were scrutinized using a racemic solution of valine and measuring the circular dichroism and optical polarimetery. A chiral selectivity factor of 5.22 was found with a specific enantiomer of valine adsorbed preferably. These results raise the new possibilities of CMS spheres for enantiomeric separation and other enantioselective applications.