Highly Fluorescent Aggregates Modulated by Surfactant Structure and Concentration

Water-soluble and highly emissive near-infrared nano-probes by co-assembly of ionic amphiphiles: towards application in cell imaging

Highly emissive near-infrared nano-emitters formed by co-assembly of ionic amphiphiles were applicable in cell imaging.

Towards the Prediction of Global Solution State Properties for Hydrogen Bonded, Self-Associating Amphiphiles

Through this extensive structure-property study we show that critical micelle concentration correlates with self-associative hydrogen bond complex formation constant, when combined with outputs from low level, widely accessible, computational models. Herein, we bring together a series of 39 structurally related molecules related by stepwise variation of a hydrogen bond donor-acceptor amphiphilic salt. The self-associative and corresponding global properties for this family of compounds have been studied in the gas, solid and solution states. Within the solution state, we have shown the type of self-associated structure present to be solvent dependent. In DMSO, this class of compound show a preference for hydrogen bonded dimer formation, however moving into aqueous solutions the same compounds are found to form larger self-associated aggregates. This observation has allowed us the unique opportunity to investigate and begin to predict self-association events at both the molecular and extended aggregate level.

Towards quantifying the role of hydrogen bonding within amphiphile self-association and resultant aggregate formation

The role of hydrogen bonding within aggregate formation and CMC: can these properties be predicted by low level computational modelling?

Herein, we present a series of five tetrabutylammonium (TBA) sulfonate–urea amphiphilic salts. In solution these amphiphilic salts have been shown to form a variety of self-associated species. The proportion and type of which are both solvent and concentration dependent. In DMSO-d₆ a variety of NMR experiments provide evidence towards the formation of mainly dimeric over larger aggregate species. Increasing the percentage of water was shown to increase the concentration of the larger aggregates over dimers in solution. A correlation was established between critical micelle concentration (CMC) values obtained in a 1 : 19 EtOH : H₂O mixture, dimeric self-association constants obtained in a DMSO-d₆ – 0.5% H₂O and the results of simple semi-empirical PM6 computational modelling methods. This approach begins to quantify the role of hydrogen bonding in amphiphile self-association and the effects it imparts on surfactant properties. This consequently provides preliminary evidence that these properties maybe predicted by simple low level computational modelling techniques.

On the Molecular Form of Amyloid Marker, Auramine O, in Human Insulin Fibrils

Designing extrinsic fluorescence sensors for amyloid fibrils is a very active and important area of research. Recently, an ultrafast molecule rotor dye, Auramine O (AuO), has been projected as a fluorescent amyloid marker. It has been claimed that AuO scores better than the most extensively utilized gold-standard amyloid probe, Thioflavin-T (ThT). This advantage arises from the fact that AuO, in addition to its usual emission band (∼500 nm), also displays a large red-shifted emission band (∼560 nm), exclusively in the presence of human insulin fibril medium and not in the native protein or buffer media. On the contrary, for ThT, the emission maximum (∼490 nm) largely remains unchanged while going from protein to fibril. This otherwise unknown large red-shifted emission band of AuO, observed in the presence of human insulin fibrils, was tentatively attributed to a species formed upon fast proton dissociation from excited AuO. It was proposed that because of the long excited-state lifetime (∼1.8 ns) of AuO upon association with human insulin fibrils, this fast proton dissociation from excited AuO could be observed, which is otherwise not observed in buffer or native protein media, owing to its very short excited-state lifetime (∼1 ps). Herein, we show that despite the long excited-state lifetime of AuO in other fibrillar media (human serum albumin and lysozyme), the new red-shifted emission band at 560 nm is not observed, thus possibly suggesting a different origin of the red-shifted emission band of AuO in human insulin fibril medium. We convincingly show that this red-shifted band of AuO (∼560 nm) could be observed under conditions that promote dye aggregation, such as a premicellar concentration of surfactants and polyelectrolytes. These AuO aggregates display strong emission wavelength dependence of transient decay traces, similar to that for AuO in human insulin fibril medium. Detailed time-resolved emission spectral (TRES) measurements suggest that the AuO/premicellar surfactant and AuO/human insulin fibril system share similar features, such as a dynamic red-shift in TRES and an isoemissive point in the time-resolved area-normalized emission spectra, suggesting that the characteristic red-shifted emission band of AuO in human insulin fibril medium may arise from AuO aggregates.

Manipulation of the aggregation and deaggregation of tetraphenylethylene and silole fluorophores by amphiphiles: emission modulation and sensing applications

In this Feature Article, we have summarized the recent advances in the fluorescence modulation of tetraphenylethylene and silole fluorophores by manipulating the respective aggregation/deaggregation with amphiphiles. These include (i) the assembly of neutral tetraphenylethylene analogues with the aid of an ionic amphiphile, (ii) the aggregation of ionic tetraphenylethylene and silole induced by amphiphiles, and (iii) bio/chemosensors based on the aggregation/deaggregation of AIE fluorophores tuned by ionic amphiphiles.

One platform solid multicolour emission of terthiophene compounds controlled by mixed self-assembly

Via the mixed self-assembling procedure, solid multicolour emission materials based on an amphiphilic terthiophene compound are obtained from a unimolecular platform. Upon controlling the concentration of the cationic surfactant dodecyltriethyl ammonium bromide (DEAB) in the precipitate-monomer equilibrium system of the terthiophene compound TTC4L, mixed self-assembly of TTC4L-DEAB results in diverse structures (including plates, spheres, and needles) with different emission colours. The multicolour emissions are triggered by the different distances between the terthiophene groups in these mixed self-assemblies. Each distance corresponds to a specific molecular state of terthiophene groups, so that emissions corresponding to the monomers, excimers, and aggregates are obtained. Upon variation of the ratio of DEAB and TTC4L, the relative fraction of emissions corresponding to the monomers, excimers, and aggregates of TTC4L changes. This approach may act as a simple method to control the stacking mode of the oligothiophene group which is anticipated to realize unimolecular-platform multicolour emissions.

Water-soluble nano-fluorogens fabricated by self-assembly of bolaamphiphiles bearing AIE moieties: towards application in cell imaging

Water-soluble nano-fluorogens with AIE properties are fabricated by self-assembly of a bolaamphiphile, and successfully applied in cell imaging.

Determination of amino acids in pomegranate juices and fingerprint for adulteration with apple juices

A new chiral micellar electrokinetic chromatography-laser induced fluorescence (MEKC-LIF) method was developed using sodium dodecylbenzene sulphonate (SDBS) as surfactant for the determination of chiral amino acids in pomegranate juices. The use of SDBS as the micellar medium enhanced the fluorescence intensities of amino acids derivatised with fluorescein isothiocyanate (FITC). The amino acid profile of pomegranate juices was compared to apple amino acids and l-Asn was proposed as a marker for the adulteration of pomegranate juices with apple juices.

Controllable self-assembly of di(p-methoxylphenyl)dibenzofulvene into three different emission forms

Self-assembly of di(p-methoxylphenyl)dibenzofulvene in the absence and presence of CTAB (cetyl trimethylammonium bromide) leads to three emission forms: strongly yellow-green- and blue-emissive crystalline forms (as microrods), and weakly orange-emissive amorphous form. Each of these three emission forms can be prepared by adjusting the concentration of CTAB.

Tailoring highly oriented and micropatterned clay/polymer nanocomposites by applying an a.c. electric field

Clay/polymer nanocomposites have recently raised much interest because of their widespread industrial applications. Nevertheless, controlling both clay platelet exfoliation and orientation during polymerization still remains challenging. Herein, we report the elaboration of clay/polymer nanocomposite hydrogels from aqueous suspensions of natural swelling clays submitted to high-frequency a.c. electric fields. X-ray scattering experiments have confirmed the complete exfoliation of the clay sheets in the polymer matrix, even after polymerization. Moreover, polarized light microscopy shows that the clay platelets were perfectly oriented by the electric field and that this field-induced alignment was frozen in by in situ photopolymerization. This procedure allowed us to not only produce uniformly aligned samples but also pattern platelet orientation, at length scales down to 20 μm. This straightforward and cheap nanocomposite patterning technique can be easily extended to a wide range of natural or synthetic inorganic anisotropic particles.

Experimental and molecular dynamics investigation into the amphiphilic nature of sulforhodamine B

Sulforhodamine B (SRB), a common fluorescent dye, is often considered to be a purely hydrophilic molecule, having no impact on bulk or interfacial properties of aqueous solutions. This assumption is due to the high water solubility of SRB relative to most fluorescent probes. However, in the present study, we demonstrate that SRB is in fact an amphiphile, with the ability to adsorb at an air/water interface and to incorporate into sodium dodecyl sulfate (SDS) micelles. In fact, SRB reduces the surface tension of water by up to 23 mN/m, and the addition of SRB to an aqueous SDS solution induces a significant decrease in the cmc of SDS. Molecular dynamics simulations were conducted to gain a deeper understanding of these findings. The simulations revealed that SRB has defined polar "head" and nonpolar "tail" regions when adsorbed at the air/water interface as a monomer. In contrast, when incorporated into SDS micelles, only the sulfonate groups were found to be highly hydrated, suggesting that the majority of the SRB molecule penetrates into the micelle. To illustrate the implications of the amphiphilic nature of SRB, an interesting case study involving the effect of SRB on ultrasound-mediated transdermal drug delivery is presented.